All of lore.kernel.org
 help / color / mirror / Atom feed
From: Icenowy Zheng <icenowy@aosc.io>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
	Chen-Yu Tsai <wens@csie.org>,
	Jagan Teki <jagan@amarulasolutions.com>,
	Jernej Skrabec <jernej.skrabec@siol.net>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-sunxi@googlegroups.com, Icenowy Zheng <icenowy@aosc.io>
Subject: [PATCH v4 11/11] arm64: dts: allwinner: a64: Enable HDMI output on A64 boards w/ HDMI
Date: Tue,  4 Sep 2018 12:40:53 +0800	[thread overview]
Message-ID: <20180904044053.15425-12-icenowy@aosc.io> (raw)
In-Reply-To: <20180904044053.15425-1-icenowy@aosc.io>

From: Jagan Teki <jagan@amarulasolutions.com>

Enable all necessary device tree nodes and add connector node to device
trees for all supported A64 boards with HDMI.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Icenowy: squash all board patches altogether and change supply name]
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
Changes in v4:
- Rebase some device trees.
Changes in v3,1:
- Squash all enablement patches altogether.
- Change supply name to match DT binding & driver change.
Changes for v3:
- Enable all pipeline components
Changes for v2:
- none

 .../dts/allwinner/sun50i-a64-bananapi-m64.dts | 34 +++++++++++++++++++
 .../dts/allwinner/sun50i-a64-nanopi-a64.dts   | 34 +++++++++++++++++++
 .../dts/allwinner/sun50i-a64-olinuxino.dts    | 34 +++++++++++++++++++
 .../dts/allwinner/sun50i-a64-orangepi-win.dts | 34 +++++++++++++++++++
 .../boot/dts/allwinner/sun50i-a64-pine64.dts  | 34 +++++++++++++++++++
 .../allwinner/sun50i-a64-sopine-baseboard.dts | 34 +++++++++++++++++++
 6 files changed, 204 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 094cfed13df9..cdd03d1145f3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -60,6 +60,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -86,6 +97,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -103,6 +118,17 @@
 	status = "okay";
 };
 
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
index 0ee915d8eb24..22cd5223ede3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
@@ -59,6 +59,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -76,6 +87,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -93,6 +108,17 @@
 	status = "okay";
 };
 
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 /* i2c1 connected with gpio headers like pine64, bananapi */
 &i2c1 {
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index a1c2f06ed474..3c18a2f27538 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -59,6 +59,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	reg_usb1_vbus: usb1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1-vbus";
@@ -76,6 +87,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -93,6 +108,17 @@
 	status = "okay";
 };
 
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mdio {
 	ext_rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
index c879aa8d8d1b..6109074e3613 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -64,6 +64,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -101,6 +112,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -118,6 +133,17 @@
 	status = "okay";
 };
 
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mdio {
 	ext_rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index 1b9b92e541d2..93a7455347a7 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -62,6 +62,21 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&de {
+	status = "okay";
 };
 
 &ehci0 {
@@ -82,6 +97,17 @@
 
 };
 
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index c21f2331add6..c09c131ae077 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -61,6 +61,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	reg_vcc1v8: vcc1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc1v8";
@@ -69,6 +80,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -86,6 +101,17 @@
 	status = "okay";
 };
 
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mdio {
 	ext_rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
-- 
2.18.0


WARNING: multiple messages have this Message-ID (diff)
From: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
To: Maxime Ripard
	<maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>,
	Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
	Jagan Teki
	<jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>,
	Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
Cc: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
Subject: [PATCH v4 11/11] arm64: dts: allwinner: a64: Enable HDMI output on A64 boards w/ HDMI
Date: Tue,  4 Sep 2018 12:40:53 +0800	[thread overview]
Message-ID: <20180904044053.15425-12-icenowy@aosc.io> (raw)
In-Reply-To: <20180904044053.15425-1-icenowy-h8G6r0blFSE@public.gmane.org>

From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>

Enable all necessary device tree nodes and add connector node to device
trees for all supported A64 boards with HDMI.

Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
[Icenowy: squash all board patches altogether and change supply name]
Signed-off-by: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
---
Changes in v4:
- Rebase some device trees.
Changes in v3,1:
- Squash all enablement patches altogether.
- Change supply name to match DT binding & driver change.
Changes for v3:
- Enable all pipeline components
Changes for v2:
- none

 .../dts/allwinner/sun50i-a64-bananapi-m64.dts | 34 +++++++++++++++++++
 .../dts/allwinner/sun50i-a64-nanopi-a64.dts   | 34 +++++++++++++++++++
 .../dts/allwinner/sun50i-a64-olinuxino.dts    | 34 +++++++++++++++++++
 .../dts/allwinner/sun50i-a64-orangepi-win.dts | 34 +++++++++++++++++++
 .../boot/dts/allwinner/sun50i-a64-pine64.dts  | 34 +++++++++++++++++++
 .../allwinner/sun50i-a64-sopine-baseboard.dts | 34 +++++++++++++++++++
 6 files changed, 204 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 094cfed13df9..cdd03d1145f3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -60,6 +60,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -86,6 +97,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -103,6 +118,17 @@
 	status = "okay";
 };
 
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
index 0ee915d8eb24..22cd5223ede3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
@@ -59,6 +59,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -76,6 +87,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -93,6 +108,17 @@
 	status = "okay";
 };
 
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 /* i2c1 connected with gpio headers like pine64, bananapi */
 &i2c1 {
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index a1c2f06ed474..3c18a2f27538 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -59,6 +59,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	reg_usb1_vbus: usb1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1-vbus";
@@ -76,6 +87,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -93,6 +108,17 @@
 	status = "okay";
 };
 
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mdio {
 	ext_rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
index c879aa8d8d1b..6109074e3613 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -64,6 +64,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -101,6 +112,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -118,6 +133,17 @@
 	status = "okay";
 };
 
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mdio {
 	ext_rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index 1b9b92e541d2..93a7455347a7 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -62,6 +62,21 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&de {
+	status = "okay";
 };
 
 &ehci0 {
@@ -82,6 +97,17 @@
 
 };
 
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index c21f2331add6..c09c131ae077 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -61,6 +61,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	reg_vcc1v8: vcc1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc1v8";
@@ -69,6 +80,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -86,6 +101,17 @@
 	status = "okay";
 };
 
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mdio {
 	ext_rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
-- 
2.18.0

WARNING: multiple messages have this Message-ID (diff)
From: icenowy@aosc.io (Icenowy Zheng)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 11/11] arm64: dts: allwinner: a64: Enable HDMI output on A64 boards w/ HDMI
Date: Tue,  4 Sep 2018 12:40:53 +0800	[thread overview]
Message-ID: <20180904044053.15425-12-icenowy@aosc.io> (raw)
In-Reply-To: <20180904044053.15425-1-icenowy@aosc.io>

From: Jagan Teki <jagan@amarulasolutions.com>

Enable all necessary device tree nodes and add connector node to device
trees for all supported A64 boards with HDMI.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Icenowy: squash all board patches altogether and change supply name]
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
Changes in v4:
- Rebase some device trees.
Changes in v3,1:
- Squash all enablement patches altogether.
- Change supply name to match DT binding & driver change.
Changes for v3:
- Enable all pipeline components
Changes for v2:
- none

 .../dts/allwinner/sun50i-a64-bananapi-m64.dts | 34 +++++++++++++++++++
 .../dts/allwinner/sun50i-a64-nanopi-a64.dts   | 34 +++++++++++++++++++
 .../dts/allwinner/sun50i-a64-olinuxino.dts    | 34 +++++++++++++++++++
 .../dts/allwinner/sun50i-a64-orangepi-win.dts | 34 +++++++++++++++++++
 .../boot/dts/allwinner/sun50i-a64-pine64.dts  | 34 +++++++++++++++++++
 .../allwinner/sun50i-a64-sopine-baseboard.dts | 34 +++++++++++++++++++
 6 files changed, 204 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 094cfed13df9..cdd03d1145f3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -60,6 +60,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -86,6 +97,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -103,6 +118,17 @@
 	status = "okay";
 };
 
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
index 0ee915d8eb24..22cd5223ede3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
@@ -59,6 +59,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -76,6 +87,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -93,6 +108,17 @@
 	status = "okay";
 };
 
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 /* i2c1 connected with gpio headers like pine64, bananapi */
 &i2c1 {
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index a1c2f06ed474..3c18a2f27538 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -59,6 +59,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	reg_usb1_vbus: usb1-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1-vbus";
@@ -76,6 +87,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -93,6 +108,17 @@
 	status = "okay";
 };
 
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mdio {
 	ext_rgmii_phy: ethernet-phy at 1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
index c879aa8d8d1b..6109074e3613 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -64,6 +64,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -101,6 +112,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -118,6 +133,17 @@
 	status = "okay";
 };
 
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mdio {
 	ext_rgmii_phy: ethernet-phy at 1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index 1b9b92e541d2..93a7455347a7 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -62,6 +62,21 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&de {
+	status = "okay";
 };
 
 &ehci0 {
@@ -82,6 +97,17 @@
 
 };
 
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index c21f2331add6..c09c131ae077 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -61,6 +61,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	reg_vcc1v8: vcc1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc1v8";
@@ -69,6 +80,10 @@
 	};
 };
 
+&de {
+	status = "okay";
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -86,6 +101,17 @@
 	status = "okay";
 };
 
+&hdmi {
+	hvcc-supply = <&reg_dldo1>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &mdio {
 	ext_rgmii_phy: ethernet-phy at 1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
-- 
2.18.0

  parent reply	other threads:[~2018-09-04  4:42 UTC|newest]

Thread overview: 94+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-04  4:40 [PATCH v4 00/11] arm64: allwinner: Add A64 DE2 HDMI support Icenowy Zheng
2018-09-04  4:40 ` Icenowy Zheng
2018-09-04  4:40 ` Icenowy Zheng
2018-09-04  4:40 ` [PATCH v4 01/11] clk: sunxi-ng: a64: Add minimal rate for video PLLs Icenowy Zheng
2018-09-04  4:40   ` Icenowy Zheng
2018-09-04  4:40   ` Icenowy Zheng
2018-09-05  7:16   ` Maxime Ripard
2018-09-05  7:16     ` Maxime Ripard
2018-09-05  7:16     ` Maxime Ripard
2018-09-04  4:40 ` [PATCH v4 02/11] clk: sunxi-ng: a64: Add max. rate constraint to " Icenowy Zheng
2018-09-04  4:40   ` Icenowy Zheng
2018-09-04  4:40   ` Icenowy Zheng
2018-09-05  7:16   ` Maxime Ripard
2018-09-05  7:16     ` Maxime Ripard
2018-09-05  7:16     ` Maxime Ripard
2018-09-05 10:17     ` Sergey Suloev
2018-09-05 10:22     ` Sergey Suloev
2018-09-05 10:22       ` Sergey Suloev
2018-09-04  4:40 ` [PATCH v4 03/11] dt-bindings: display: Add compatible for A64 DE2 display pipeline Icenowy Zheng
2018-09-04  4:40   ` Icenowy Zheng
2018-09-05  7:20   ` Maxime Ripard
2018-09-05  7:20     ` Maxime Ripard
2018-09-05  7:20     ` Maxime Ripard
2018-09-04  4:40 ` [PATCH v4 04/11] drm/sun4i: Add support for A64 mixers Icenowy Zheng
2018-09-04  4:40   ` Icenowy Zheng
2018-09-05  7:21   ` Maxime Ripard
2018-09-05  7:21     ` Maxime Ripard
2018-09-05  7:21     ` Maxime Ripard
2018-09-04  4:40 ` [PATCH v4 05/11] drm/sun4i: Add support for A64 display engine Icenowy Zheng
2018-09-04  4:40   ` Icenowy Zheng
2018-09-05  7:21   ` Maxime Ripard
2018-09-05  7:21     ` Maxime Ripard
2018-09-05  7:21     ` Maxime Ripard
2018-09-04  4:40 ` [PATCH v4 06/11] dt-bindings: display: Add compatible for A64 HDMI Icenowy Zheng
2018-09-04  4:40   ` Icenowy Zheng
2018-09-04  4:40   ` Icenowy Zheng
2018-09-05  7:21   ` Maxime Ripard
2018-09-05  7:21     ` Maxime Ripard
2018-09-05  7:21     ` Maxime Ripard
2018-09-04  4:40 ` [PATCH v4 07/11] dt-bindings: clock: sun50i-a64-ccu: Add PLL_VIDEO0 macro Icenowy Zheng
2018-09-04  4:40   ` Icenowy Zheng
2018-09-04  4:40   ` Icenowy Zheng
2018-09-05  7:21   ` Maxime Ripard
2018-09-05  7:21     ` Maxime Ripard
2018-09-05  7:21     ` Maxime Ripard
2018-09-04  4:40 ` [PATCH v4 08/11] arm64: dts: allwinner: a64: Add display pipeline Icenowy Zheng
2018-09-04  4:40   ` Icenowy Zheng
2018-09-04  4:40   ` Icenowy Zheng
2018-09-05  7:50   ` Maxime Ripard
2018-09-05  7:50     ` Maxime Ripard
2018-09-05  7:50     ` Maxime Ripard
2018-09-07  4:13     ` Jagan Teki
2018-09-07  4:13       ` Jagan Teki
2018-09-07  4:13       ` Jagan Teki
2018-09-07  8:21       ` Maxime Ripard
2018-09-07  8:21         ` Maxime Ripard
2018-09-07  8:21         ` Maxime Ripard
2018-09-06  6:18   ` [linux-sunxi] " Jagan Teki
2018-09-06  6:18     ` Jagan Teki
2018-09-06  6:18     ` Jagan Teki
2018-09-06  6:19     ` [linux-sunxi] " Icenowy Zheng
2018-09-06  6:19       ` Icenowy Zheng
2018-09-06  6:19       ` Icenowy Zheng
2018-09-04  4:40 ` [PATCH v4 09/11] dt-bindings: sun4i-drm: add HDMI VCC supply property for sun8i-dw-hdmi Icenowy Zheng
2018-09-04  4:40   ` Icenowy Zheng
2018-09-04  4:40   ` Icenowy Zheng
2018-09-05  7:22   ` Maxime Ripard
2018-09-05  7:22     ` Maxime Ripard
2018-09-05  7:22     ` Maxime Ripard
2018-09-04  4:40 ` [PATCH v4 10/11] drm/sun4i: Add support for HDMI voltage regulator Icenowy Zheng
2018-09-04  4:40   ` Icenowy Zheng
2018-09-04  4:40   ` Icenowy Zheng
2018-09-05  7:22   ` Maxime Ripard
2018-09-05  7:22     ` Maxime Ripard
2018-09-05  7:22     ` Maxime Ripard
2018-09-04  4:40 ` Icenowy Zheng [this message]
2018-09-04  4:40   ` [PATCH v4 11/11] arm64: dts: allwinner: a64: Enable HDMI output on A64 boards w/ HDMI Icenowy Zheng
2018-09-04  4:40   ` Icenowy Zheng
2018-09-05  7:26   ` [linux-sunxi] " Jagan Teki
2018-09-05  7:26     ` Jagan Teki
2018-09-05  7:26     ` Jagan Teki
2018-09-05  7:51     ` [linux-sunxi] " Maxime Ripard
2018-09-05  7:51       ` Maxime Ripard
2018-09-05  7:51       ` Maxime Ripard
2018-09-05  7:57       ` [linux-sunxi] " Jagan Teki
2018-09-05  7:57         ` Jagan Teki
2018-09-05  7:57         ` Jagan Teki
2018-09-05 22:53         ` [linux-sunxi] " Vasily Khoruzhick
2018-09-05 22:53           ` Vasily Khoruzhick
2018-09-06  4:12           ` Vasily Khoruzhick
2018-09-06  4:12             ` Vasily Khoruzhick
2018-09-06  5:07         ` Jernej Škrabec
2018-09-06  5:07           ` Jernej Škrabec
2018-09-06  5:07           ` Jernej Škrabec

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180904044053.15425-12-icenowy@aosc.io \
    --to=icenowy@aosc.io \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jagan@amarulasolutions.com \
    --cc=jernej.skrabec@siol.net \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.