[PATCH AUTOSEL 4.9 01/43] usb: usbtest: use irqsave() in USB's complete callback

[PATCH AUTOSEL 4.9 01/43] usb: usbtest: use irqsave() in USB's complete callback

[Sasha Levin]

From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

[ Upstream commit 6f3fde684d0232e66ada3410f016a58e09a87689 ]

The USB completion callback does not disable interrupts while acquiring
the lock. We want to remove the local_irq_disable() invocation from
__usb_hcd_giveback_urb() and therefore it is required for the callback
handler to disable the interrupts while acquiring the lock.
The callback may be invoked either in IRQ or BH context depending on the
USB host controller.
Use the _irqsave() variant of the locking primitives.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/usb/misc/usbtest.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index e31f72b3a22c..cc1dad83ec1d 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -1080,11 +1080,12 @@ static void ctrl_complete(struct urb *urb)
 	struct usb_ctrlrequest	*reqp;
 	struct subcase		*subcase;
 	int			status = urb->status;
+	unsigned long		flags;
 
 	reqp = (struct usb_ctrlrequest *)urb->setup_packet;
 	subcase = container_of(reqp, struct subcase, setup);
 
-	spin_lock(&ctx->lock);
+	spin_lock_irqsave(&ctx->lock, flags);
 	ctx->count--;
 	ctx->pending--;
 
@@ -1183,7 +1184,7 @@ static void ctrl_complete(struct urb *urb)
 	/* signal completion when nothing's queued */
 	if (ctx->pending == 0)
 		complete(&ctx->complete);
-	spin_unlock(&ctx->lock);
+	spin_unlock_irqrestore(&ctx->lock, flags);
 }
 
 static int
@@ -1859,8 +1860,9 @@ struct transfer_context {
 static void complicated_callback(struct urb *urb)
 {
 	struct transfer_context	*ctx = urb->context;
+	unsigned long flags;
 
-	spin_lock(&ctx->lock);
+	spin_lock_irqsave(&ctx->lock, flags);
 	ctx->count--;
 
 	ctx->packet_count += urb->number_of_packets;
@@ -1900,7 +1902,7 @@ static void complicated_callback(struct urb *urb)
 		complete(&ctx->done);
 	}
 done:
-	spin_unlock(&ctx->lock);
+	spin_unlock_irqrestore(&ctx->lock, flags);
 }
 
 static struct urb *iso_alloc_urb(
-- 
2.17.1

[PATCH AUTOSEL 4.9 02/43] iommu/arm-smmu-v3: sync the OVACKFLG to PRIQ consumer register

[Sasha Levin]

From: Miao Zhong <zhongmiao@hisilicon.com>

[ Upstream commit 0d535967ac658966c6ade8f82b5799092f7d5441 ]

When PRI queue occurs overflow, driver should update the OVACKFLG to
the PRIQ consumer register, otherwise subsequent PRI requests will not
be processed.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Miao Zhong <zhongmiao@hisilicon.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/iommu/arm-smmu-v3.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c
index 7f294f785ce6..ff4be1174ff0 100644
--- a/drivers/iommu/arm-smmu-v3.c
+++ b/drivers/iommu/arm-smmu-v3.c
@@ -1233,6 +1233,7 @@ static irqreturn_t arm_smmu_priq_thread(int irq, void *dev)
 
 	/* Sync our overflow flag, as we believe we're up to speed */
 	q->cons = Q_OVF(q, q->prod) | Q_WRP(q, q->cons) | Q_IDX(q, q->cons);
+	writel(q->cons, q->cons_reg);
 	return IRQ_HANDLED;
 }
 
-- 
2.17.1

[PATCH AUTOSEL 4.9 04/43] ALSA: usb-audio: Fix multiple definitions in AU0828_DEVICE() macro

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit bd1cd0eb2ce9141100628d476ead4de485501b29 ]

AU0828_DEVICE() macro in quirks-table.h uses USB_DEVICE_VENDOR_SPEC()
for expanding idVendor and idProduct fields.  However, the latter
macro adds also match_flags and bInterfaceClass, which are different
from the values AU0828_DEVICE() macro sets after that.

For fixing them, just expand idVendor and idProduct fields manually in
AU0828_DEVICE().

This fixes sparse warnings like:
  sound/usb/quirks-table.h:2892:1: warning: Initializer entry defined twice

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/usb/quirks-table.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 69bf5cf1e91e..15cbe2565703 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -2875,7 +2875,8 @@ YAMAHA_DEVICE(0x7010, "UB99"),
  */
 
 #define AU0828_DEVICE(vid, pid, vname, pname) { \
-	USB_DEVICE_VENDOR_SPEC(vid, pid), \
+	.idVendor = vid, \
+	.idProduct = pid, \
 	.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
 		       USB_DEVICE_ID_MATCH_INT_CLASS | \
 		       USB_DEVICE_ID_MATCH_INT_SUBCLASS, \
-- 
2.17.1

[PATCH AUTOSEL 4.9 03/43] ALSA: msnd: Fix the default sample sizes

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 7c500f9ea139d0c9b80fdea5a9c911db3166ea54 ]

The default sample sizes set by msnd driver are bogus; it sets ALSA
PCM format, not the actual bit width.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 sound/isa/msnd/msnd_pinnacle.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/isa/msnd/msnd_pinnacle.c b/sound/isa/msnd/msnd_pinnacle.c
index a31ea6c22d19..2d7379dec1f0 100644
--- a/sound/isa/msnd/msnd_pinnacle.c
+++ b/sound/isa/msnd/msnd_pinnacle.c
@@ -82,10 +82,10 @@
 
 static void set_default_audio_parameters(struct snd_msnd *chip)
 {
-	chip->play_sample_size = DEFSAMPLESIZE;
+	chip->play_sample_size = snd_pcm_format_width(DEFSAMPLESIZE);
 	chip->play_sample_rate = DEFSAMPLERATE;
 	chip->play_channels = DEFCHANNELS;
-	chip->capture_sample_size = DEFSAMPLESIZE;
+	chip->capture_sample_size = snd_pcm_format_width(DEFSAMPLESIZE);
 	chip->capture_sample_rate = DEFSAMPLERATE;
 	chip->capture_channels = DEFCHANNELS;
 }
-- 
2.17.1

[PATCH AUTOSEL 4.9 05/43] xfrm: fix 'passing zero to ERR_PTR()' warning

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 934ffce1343f22ed5e2d0bd6da4440f4848074de ]

Fix a static code checker warning:

  net/xfrm/xfrm_policy.c:1836 xfrm_resolve_and_create_bundle() warn: passing zero to 'ERR_PTR'

xfrm_tmpl_resolve return 0 just means no xdst found, return NULL
instead of passing zero to ERR_PTR.

Fixes: d809ec895505 ("xfrm: do not assume that template resolving always returns xfrms")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/xfrm/xfrm_policy.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 5b8fa6832687..f02fc03dc964 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1873,7 +1873,10 @@ xfrm_resolve_and_create_bundle(struct xfrm_policy **pols, int num_pols,
 	/* Try to instantiate a bundle */
 	err = xfrm_tmpl_resolve(pols, num_pols, fl, xfrm, family);
 	if (err <= 0) {
-		if (err != 0 && err != -EAGAIN)
+		if (err == 0)
+			return NULL;
+
+		if (err != -EAGAIN)
 			XFRM_INC_STATS(net, LINUX_MIB_XFRMOUTPOLERROR);
 		return ERR_PTR(err);
 	}
-- 
2.17.1

[PATCH AUTOSEL 4.9 06/43] gfs2: Special-case rindex for gfs2_grow

[Sasha Levin]

From: Andreas Gruenbacher <agruenba@redhat.com>

[ Upstream commit 776125785a87ff05d49938bd5b9f336f2a05bff6 ]

To speed up the common case of appending to a file,
gfs2_write_alloc_required presumes that writing beyond the end of a file
will always require additional blocks to be allocated.  This assumption
is incorrect for preallocates files, but there are no negative
consequences as long as *some* space is still left on the filesystem.

One special file that always has some space preallocated beyond the end
of the file is the rindex: when growing a filesystem, gfs2_grow adds one
or more new resource groups and appends records describing those
resource groups to the rindex; the preallocated space ensures that this
is always possible.

However, when a filesystem is completely full, gfs2_write_alloc_required
will indicate that an additional allocation is required, and appending
the next record to the rindex will fail even though space for that
record has already been preallocated.  To fix that, skip the incorrect
optimization in gfs2_write_alloc_required, but for the rindex only.
Other writes to preallocated space beyond the end of the file are still
allowed to fail on completely full filesystems.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/gfs2/bmap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
index fc5da4cbe88c..39af17b407f0 100644
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -1472,7 +1472,7 @@ int gfs2_write_alloc_required(struct gfs2_inode *ip, u64 offset,
 	end_of_file = (i_size_read(&ip->i_inode) + sdp->sd_sb.sb_bsize - 1) >> shift;
 	lblock = offset >> shift;
 	lblock_stop = (offset + len + sdp->sd_sb.sb_bsize - 1) >> shift;
-	if (lblock_stop > end_of_file)
+	if (lblock_stop > end_of_file && ip != GFS2_I(sdp->sd_rindex))
 		return 1;
 
 	size = (lblock_stop - lblock) << shift;
-- 
2.17.1

[PATCH AUTOSEL 4.9 07/43] clk: imx6ul: fix missing of_node_put()

[Sasha Levin]

From: Nicholas Mc Guire <hofrat@osadl.org>

[ Upstream commit 11177e7a7aaef95935592072985526ebf0a3df43 ]

of_find_compatible_node() is returning a device node with refcount
incremented and must be explicitly decremented after the last use
which is right after the us in of_iomap() here.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: 787b4271a6a0 ("clk: imx: add imx6ul clk tree support")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/clk/imx/clk-imx6ul.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
index d1d7787ce211..db2901646403 100644
--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -120,6 +120,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6ul-anatop");
 	base = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!base);
 
 	clks[IMX6UL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
-- 
2.17.1

[PATCH AUTOSEL 4.9 08/43] clk: clk-fixed-factor: Clear OF_POPULATED flag in case of failure

[Sasha Levin]

From: Rajan Vaja <rajan.vaja@xilinx.com>

[ Upstream commit f6dab4233d6b64d719109040503b567f71fbfa01 ]

Fixed factor clock has two initializations at of_clk_init() time
and during platform driver probe. Before of_clk_init() call,
node is marked as populated and so its probe never gets called.

During of_clk_init() fixed factor clock registration may fail if
any of its parent clock is not registered. In this case, it doesn't
get chance to retry registration from probe. Clear OF_POPULATED
flag if fixed factor clock registration fails so that clock
registration is attempted again from probe.

Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/clk/clk-fixed-factor.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
index a5d402de5584..20724abd38bd 100644
--- a/drivers/clk/clk-fixed-factor.c
+++ b/drivers/clk/clk-fixed-factor.c
@@ -177,8 +177,15 @@ static struct clk *_of_fixed_factor_clk_setup(struct device_node *node)
 
 	clk = clk_register_fixed_factor(NULL, clk_name, parent_name, flags,
 					mult, div);
-	if (IS_ERR(clk))
+	if (IS_ERR(clk)) {
+		/*
+		 * If parent clock is not registered, registration would fail.
+		 * Clear OF_POPULATED flag so that clock registration can be
+		 * attempted again from probe function.
+		 */
+		of_node_clear_flag(node, OF_POPULATED);
 		return clk;
+	}
 
 	ret = of_clk_add_provider(node, of_clk_src_simple_get, clk);
 	if (ret) {
-- 
2.17.1

[PATCH AUTOSEL 4.9 09/43] kbuild: add .DELETE_ON_ERROR special target

[Sasha Levin]

From: Masahiro Yamada <yamada.masahiro@socionext.com>

[ Upstream commit 9c2af1c7377a8a6ef86e5cabf80978f3dbbb25c0 ]

If Make gets a fatal signal while a shell is executing, it may delete
the target file that the recipe was supposed to update.  This is needed
to make sure that it is remade from scratch when Make is next run; if
Make is interrupted after the recipe has begun to write the target file,
it results in an incomplete file whose time stamp is newer than that
of the prerequisites files.  Make automatically deletes the incomplete
file on interrupt unless the target is marked .PRECIOUS.

The situation is just the same as when the shell fails for some reasons.
Usually when a recipe line fails, if it has changed the target file at
all, the file is corrupted, or at least it is not completely updated.
Yet the file’s time stamp says that it is now up to date, so the next
time Make runs, it will not try to update that file.

However, Make does not cater to delete the incomplete target file in
this case.  We need to add .DELETE_ON_ERROR somewhere in the Makefile
to request it.

scripts/Kbuild.include seems a suitable place to add it because it is
included from almost all sub-makes.

Please note .DELETE_ON_ERROR is not effective for phony targets.

The external module building should never ever touch the kernel tree.
The following recipe fails if include/generated/autoconf.h is missing.
However, include/config/auto.conf is not deleted since it is a phony
target.

 PHONY += include/config/auto.conf

 include/config/auto.conf:
         $(Q)test -e include/generated/autoconf.h -a -e $@ || (          \
         echo >&2;                                                       \
         echo >&2 "  ERROR: Kernel configuration is invalid.";           \
         echo >&2 "         include/generated/autoconf.h or $@ are missing.";\
         echo >&2 "         Run 'make oldconfig && make prepare' on kernel src to fix it."; \
         echo >&2 ;                                                      \
         /bin/false)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 scripts/Kbuild.include | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index 63774307a751..8f8965608ee3 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -394,3 +394,6 @@ endif
 endef
 #
 ###############################################################################
+
+# delete partially updated (i.e. corrupted) files on error
+.DELETE_ON_ERROR:
-- 
2.17.1

[PATCH AUTOSEL 4.9 10/43] media: tw686x: Fix oops on buffer alloc failure

[Sasha Levin]

From: Krzysztof Ha?asa <khalasa@piap.pl>

[ Upstream commit 5a1a2f63d840dc2631505b607e11ff65ac1b7d3c ]

The error path currently calls tw686x_video_free() which requires
vc->dev to be initialized, causing a NULL dereference on uninitizalized
channels.

Fix this by setting the vc->dev fields for all the channels first.

Fixes: f8afaa8dbc0d ("[media] tw686x: Introduce an interface to support multiple DMA modes")

Signed-off-by: Krzysztof Ha?asa <khalasa@piap.pl>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/pci/tw686x/tw686x-video.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/media/pci/tw686x/tw686x-video.c b/drivers/media/pci/tw686x/tw686x-video.c
index 0ea8dd44026c..3a06c000f97b 100644
--- a/drivers/media/pci/tw686x/tw686x-video.c
+++ b/drivers/media/pci/tw686x/tw686x-video.c
@@ -1190,6 +1190,14 @@ int tw686x_video_init(struct tw686x_dev *dev)
 			return err;
 	}
 
+	/* Initialize vc->dev and vc->ch for the error path */
+	for (ch = 0; ch < max_channels(dev); ch++) {
+		struct tw686x_video_channel *vc = &dev->video_channels[ch];
+
+		vc->dev = dev;
+		vc->ch = ch;
+	}
+
 	for (ch = 0; ch < max_channels(dev); ch++) {
 		struct tw686x_video_channel *vc = &dev->video_channels[ch];
 		struct video_device *vdev;
@@ -1198,9 +1206,6 @@ int tw686x_video_init(struct tw686x_dev *dev)
 		spin_lock_init(&vc->qlock);
 		INIT_LIST_HEAD(&vc->vidq_queued);
 
-		vc->dev = dev;
-		vc->ch = ch;
-
 		/* default settings */
 		err = tw686x_set_standard(vc, V4L2_STD_NTSC);
 		if (err)
-- 
2.17.1

[PATCH AUTOSEL 4.9 11/43] dmaengine: pl330: fix irq race with terminate_all

[Sasha Levin]

From: John Keeping <john@metanate.com>

[ Upstream commit e49756544a21f5625b379b3871d27d8500764670 ]

In pl330_update() when checking if a channel has been aborted, the
channel's lock is not taken, only the overall pl330_dmac lock.  But in
pl330_terminate_all() the aborted flag (req_running==-1) is set under
the channel lock and not the pl330_dmac lock.

With threaded interrupts, this leads to a potential race:

    pl330_terminate_all	        pl330_update
    -------------------         ------------
    lock channel
                                entry
    lock pl330
    _stop channel
    unlock pl330
                                lock pl330
                                check req_running != -1
    req_running = -1
                                _start channel

Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/dma/pl330.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index b9dad4e40bb8..6d7e3cd4aba4 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -2167,13 +2167,14 @@ static int pl330_terminate_all(struct dma_chan *chan)
 
 	pm_runtime_get_sync(pl330->ddma.dev);
 	spin_lock_irqsave(&pch->lock, flags);
+
 	spin_lock(&pl330->lock);
 	_stop(pch->thread);
-	spin_unlock(&pl330->lock);
-
 	pch->thread->req[0].desc = NULL;
 	pch->thread->req[1].desc = NULL;
 	pch->thread->req_running = -1;
+	spin_unlock(&pl330->lock);
+
 	power_down = pch->active;
 	pch->active = false;
 
-- 
2.17.1

[PATCH AUTOSEL 4.9 12/43] MIPS: ath79: fix system restart

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit f8a7bfe1cb2c1ebfa07775c9c8ac0ad3ba8e5ff5 ]

This patch disables irq on reboot to fix hang issues that were observed
due to pending interrupts.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19913/
Cc: James Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/mips/ath79/setup.c                  | 1 +
 arch/mips/include/asm/mach-ath79/ath79.h | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c
index f206dafbb0a3..26a058d58d37 100644
--- a/arch/mips/ath79/setup.c
+++ b/arch/mips/ath79/setup.c
@@ -40,6 +40,7 @@ static char ath79_sys_type[ATH79_SYS_TYPE_LEN];
 
 static void ath79_restart(char *command)
 {
+	local_irq_disable();
 	ath79_device_reset_set(AR71XX_RESET_FULL_CHIP);
 	for (;;)
 		if (cpu_wait)
diff --git a/arch/mips/include/asm/mach-ath79/ath79.h b/arch/mips/include/asm/mach-ath79/ath79.h
index 441faa92c3cd..6e6c0fead776 100644
--- a/arch/mips/include/asm/mach-ath79/ath79.h
+++ b/arch/mips/include/asm/mach-ath79/ath79.h
@@ -134,6 +134,7 @@ static inline u32 ath79_pll_rr(unsigned reg)
 static inline void ath79_reset_wr(unsigned reg, u32 val)
 {
 	__raw_writel(val, ath79_reset_base + reg);
+	(void) __raw_readl(ath79_reset_base + reg); /* flush */
 }
 
 static inline u32 ath79_reset_rr(unsigned reg)
-- 
2.17.1

[PATCH AUTOSEL 4.9 13/43] media: videobuf2-core: check for q->error in vb2_core_qbuf()

[Sasha Levin]

From: Hans Verkuil <hverkuil@xs4all.nl>

[ Upstream commit b509d733d337417bcb7fa4a35be3b9a49332b724 ]

The vb2_core_qbuf() function didn't check if q->error was set. It is
checked in __buf_prepare(), but that function isn't called if the buffer
was already prepared before with VIDIOC_PREPARE_BUF.

So check it at the start of vb2_core_qbuf() as well.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/media/v4l2-core/videobuf2-core.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/v4l2-core/videobuf2-core.c b/drivers/media/v4l2-core/videobuf2-core.c
index b3a9fa75e8e7..f7ca1fab4808 100644
--- a/drivers/media/v4l2-core/videobuf2-core.c
+++ b/drivers/media/v4l2-core/videobuf2-core.c
@@ -1375,6 +1375,11 @@ int vb2_core_qbuf(struct vb2_queue *q, unsigned int index, void *pb)
 	struct vb2_buffer *vb;
 	int ret;
 
+	if (q->error) {
+		dprintk(1, "fatal error occurred on queue\n");
+		return -EIO;
+	}
+
 	vb = q->bufs[index];
 
 	switch (vb->state) {
-- 
2.17.1

[PATCH AUTOSEL 4.9 14/43] IB/rxe: Drop QP0 silently

[Sasha Levin]

From: Zhu Yanjun <yanjun.zhu@oracle.com>

[ Upstream commit 536ca245c512aedfd84cde072d7b3ca14b6e1792 ]

According to "Annex A16: RDMA over Converged Ethernet (RoCE)":

A16.4.3 MANAGEMENT INTERFACES

As defined in the base specification, a special Queue Pair, QP0 is defined
solely for communication between subnet manager(s) and subnet management
agents. Since such an IB-defined subnet management architecture is outside
the scope of this annex, it follows that there is also no requirement that
a port which conforms to this annex be associated with a QP0. Thus, for
end nodes designed to conform to this annex, the concept of QP0 is
undefined and unused for any port connected to an Ethernet network.

CA16-8: A packet arriving at a RoCE port containing a BTH with the
destination QP field set to QP0 shall be silently dropped.

Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/infiniband/sw/rxe/rxe_recv.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/sw/rxe/rxe_recv.c b/drivers/infiniband/sw/rxe/rxe_recv.c
index 46f062842a9a..db6bb026ae90 100644
--- a/drivers/infiniband/sw/rxe/rxe_recv.c
+++ b/drivers/infiniband/sw/rxe/rxe_recv.c
@@ -225,9 +225,14 @@ static int hdr_check(struct rxe_pkt_info *pkt)
 		goto err1;
 	}
 
+	if (unlikely(qpn == 0)) {
+		pr_warn_once("QP 0 not supported");
+		goto err1;
+	}
+
 	if (qpn != IB_MULTICAST_QPN) {
-		index = (qpn == 0) ? port->qp_smi_index :
-			((qpn == 1) ? port->qp_gsi_index : qpn);
+		index = (qpn == 1) ? port->qp_gsi_index : qpn;
+
 		qp = rxe_pool_get_index(&rxe->qp_pool, index);
 		if (unlikely(!qp)) {
 			pr_warn_ratelimited("no qp matches qpn 0x%x\n", qpn);
-- 
2.17.1

[PATCH AUTOSEL 4.9 15/43] mtd/maps: fix solutionengine.c printk format warnings

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 1d25e3eeed1d987404e2d2e451eebac8c15cecc1 ]

Fix 2 printk format warnings (this driver is currently only used by
arch/sh/) by using "%pap" instead of "%lx".

Fixes these build warnings:

../drivers/mtd/maps/solutionengine.c: In function 'init_soleng_maps':
../include/linux/kern_levels.h:5:18: warning: format '%lx' expects argument of type 'long unsigned int', but argument 2 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=]
../drivers/mtd/maps/solutionengine.c:62:54: note: format string is defined here
  printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n",
                                                  ~~~~^
                                                  %08x
../include/linux/kern_levels.h:5:18: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=]
../drivers/mtd/maps/solutionengine.c:62:72: note: format string is defined here
  printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n",
                                                                    ~~~~^
                                                                    %08x

Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-mtd@lists.infradead.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/mtd/maps/solutionengine.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/maps/solutionengine.c b/drivers/mtd/maps/solutionengine.c
index bb580bc16445..c07f21b20463 100644
--- a/drivers/mtd/maps/solutionengine.c
+++ b/drivers/mtd/maps/solutionengine.c
@@ -59,9 +59,9 @@ static int __init init_soleng_maps(void)
 			return -ENXIO;
 		}
 	}
-	printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n",
-	       soleng_flash_map.phys & 0x1fffffff,
-	       soleng_eprom_map.phys & 0x1fffffff);
+	printk(KERN_NOTICE "Solution Engine: Flash at 0x%pap, EPROM at 0x%pap\n",
+	       &soleng_flash_map.phys,
+	       &soleng_eprom_map.phys);
 	flash_mtd->owner = THIS_MODULE;
 
 	eprom_mtd = do_map_probe("map_rom", &soleng_eprom_map);
-- 
2.17.1

[PATCH AUTOSEL 4.9 15/43] mtd/maps: fix solutionengine.c printk format warnings

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 1d25e3eeed1d987404e2d2e451eebac8c15cecc1 ]

Fix 2 printk format warnings (this driver is currently only used by
arch/sh/) by using "%pap" instead of "%lx".

Fixes these build warnings:

../drivers/mtd/maps/solutionengine.c: In function 'init_soleng_maps':
../include/linux/kern_levels.h:5:18: warning: format '%lx' expects argument of type 'long unsigned int', but argument 2 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=]
../drivers/mtd/maps/solutionengine.c:62:54: note: format string is defined here
  printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n",
                                                  ~~~~^
                                                  %08x
../include/linux/kern_levels.h:5:18: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=]
../drivers/mtd/maps/solutionengine.c:62:72: note: format string is defined here
  printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n",
                                                                    ~~~~^
                                                                    %08x

Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-mtd@lists.infradead.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/mtd/maps/solutionengine.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/maps/solutionengine.c b/drivers/mtd/maps/solutionengine.c
index bb580bc16445..c07f21b20463 100644
--- a/drivers/mtd/maps/solutionengine.c
+++ b/drivers/mtd/maps/solutionengine.c
@@ -59,9 +59,9 @@ static int __init init_soleng_maps(void)
 			return -ENXIO;
 		}
 	}
-	printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n",
-	       soleng_flash_map.phys & 0x1fffffff,
-	       soleng_eprom_map.phys & 0x1fffffff);
+	printk(KERN_NOTICE "Solution Engine: Flash at 0x%pap, EPROM at 0x%pap\n",
+	       &soleng_flash_map.phys,
+	       &soleng_eprom_map.phys);
 	flash_mtd->owner = THIS_MODULE;
 
 	eprom_mtd = do_map_probe("map_rom", &soleng_eprom_map);
-- 
2.17.1

[PATCH AUTOSEL 4.9 16/43] perf test: Fix subtest number when showing results

[Sasha Levin]

From: Thomas Richter <tmricht@linux.ibm.com>

[ Upstream commit 9ef0112442bdddef5fb55adf20b3a5464b33de75 ]

Perf test 40 for example has several subtests numbered 1-4 when
displaying the start of the subtest. When the subtest results
are displayed the subtests are numbered 0-3.

Use this command to generate trace output:

  [root@s35lp76 perf]# ./perf test -Fv 40 2>/tmp/bpf1

Fix this by adjusting the subtest number when show the
subtest result.

Output before:

  [root@s35lp76 perf]# egrep '(^40\.[0-4]| subtest [0-4]:)' /tmp/bpf1
  40.1: Basic BPF filtering                                 :
  BPF filter subtest 0: Ok
  40.2: BPF pinning                                         :
  BPF filter subtest 1: Ok
  40.3: BPF prologue generation                             :
  BPF filter subtest 2: Ok
  40.4: BPF relocation checker                              :
  BPF filter subtest 3: Ok
  [root@s35lp76 perf]#

Output after:

  root@s35lp76 ~]# egrep '(^40\.[0-4]| subtest [0-4]:)' /tmp/bpf1
  40.1: Basic BPF filtering                                 :
  BPF filter subtest 1: Ok
  40.2: BPF pinning                                         :
  BPF filter subtest 2: Ok
  40.3: BPF prologue generation                             :
  BPF filter subtest 3: Ok
  40.4: BPF relocation checker                              :
  BPF filter subtest 4: Ok
  [root@s35lp76 ~]#

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180724134858.100644-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/tests/builtin-test.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/tests/builtin-test.c b/tools/perf/tests/builtin-test.c
index 778668a2a966..ade7213943ad 100644
--- a/tools/perf/tests/builtin-test.c
+++ b/tools/perf/tests/builtin-test.c
@@ -413,7 +413,7 @@ static int __cmd_test(int argc, const char *argv[], struct intlist *skiplist)
 			for (subi = 0; subi < subn; subi++) {
 				pr_info("%2d.%1d: %-*s:", i, subi + 1, subw,
 					t->subtest.get_desc(subi));
-				err = test_and_print(t, skip, subi);
+				err = test_and_print(t, skip, subi + 1);
 				if (err != TEST_OK && t->subtest.skip_if_fail)
 					skip = true;
 			}
-- 
2.17.1

[PATCH AUTOSEL 4.9 17/43] gfs2: Don't reject a supposedly full bitmap if we have blocks reserved

[Sasha Levin]

From: Bob Peterson <rpeterso@redhat.com>

[ Upstream commit e79e0e1428188b24c3b57309ffa54a33c4ae40c4 ]

Before this patch, you could get into situations like this:

1. Process 1 searches for X free blocks, finds them, makes a reservation
2. Process 2 searches for free blocks in the same rgrp, but now the
   bitmap is full because process 1's reservation is skipped over.
   So it marks the bitmap as GBF_FULL.
3. Process 1 tries to allocate blocks from its own reservation, but
   since the GBF_FULL bit is set, it skips over the rgrp and searches
   elsewhere, thus not using its own reservation.

This patch adds an additional check to allow processes to use their
own reservations.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 fs/gfs2/rgrp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index 86ccc0159393..832824994aae 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -1675,7 +1675,8 @@ static int gfs2_rbm_find(struct gfs2_rbm *rbm, u8 state, u32 *minext,
 
 	while(1) {
 		bi = rbm_bi(rbm);
-		if (test_bit(GBF_FULL, &bi->bi_flags) &&
+		if ((ip == NULL || !gfs2_rs_active(&ip->i_res)) &&
+		    test_bit(GBF_FULL, &bi->bi_flags) &&
 		    (state == GFS2_BLKST_FREE))
 			goto next_bitmap;
 
-- 
2.17.1

[PATCH AUTOSEL 4.9 18/43] iio: ad9523: Fix displayed phase

[Sasha Levin]

From: Lars-Peter Clausen <lars@metafoo.de>

[ Upstream commit 5a4e33c1c53ae7d4425f7d94e60e4458a37b349e ]

Fix the displayed phase for the ad9523 driver. Currently the most
significant decimal place is dropped and all other digits are shifted one
to the left. This is due to a multiplication by 10, which is not necessary,
so remove it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Fixes: cd1678f9632 ("iio: frequency: New driver for AD9523 SPI Low Jitter Clock Generator")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/iio/frequency/ad9523.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/frequency/ad9523.c b/drivers/iio/frequency/ad9523.c
index 99eba524f6dd..cb45fa314a92 100644
--- a/drivers/iio/frequency/ad9523.c
+++ b/drivers/iio/frequency/ad9523.c
@@ -642,7 +642,7 @@ static int ad9523_read_raw(struct iio_dev *indio_dev,
 		code = (AD9523_CLK_DIST_DIV_PHASE_REV(ret) * 3141592) /
 			AD9523_CLK_DIST_DIV_REV(ret);
 		*val = code / 1000000;
-		*val2 = (code % 1000000) * 10;
+		*val2 = code % 1000000;
 		return IIO_VAL_INT_PLUS_MICRO;
 	default:
 		return -EINVAL;
-- 
2.17.1

[PATCH AUTOSEL 4.9 19/43] fbdev: omapfb: off by one in omapfb_register_client()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 5ec1ec35b2979b59d0b33381e7c9aac17e159d16 ]

The omapfb_register_client[] array has OMAPFB_PLANE_NUM elements so the
> should be >= or we are one element beyond the end of the array.

Fixes: 8b08cf2b64f5 ("OMAP: add TI OMAP framebuffer driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/video/fbdev/omap/omapfb_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/omap/omapfb_main.c b/drivers/video/fbdev/omap/omapfb_main.c
index 6429f33167f5..77c97c697fea 100644
--- a/drivers/video/fbdev/omap/omapfb_main.c
+++ b/drivers/video/fbdev/omap/omapfb_main.c
@@ -956,7 +956,7 @@ int omapfb_register_client(struct omapfb_notifier_block *omapfb_nb,
 {
 	int r;
 
-	if ((unsigned)omapfb_nb->plane_idx > OMAPFB_PLANE_NUM)
+	if ((unsigned)omapfb_nb->plane_idx >= OMAPFB_PLANE_NUM)
 		return -EINVAL;
 
 	if (!notifier_inited) {
-- 
2.17.1

[PATCH AUTOSEL 4.9 20/43] video: goldfishfb: fix memory leak on driver remove

[Sasha Levin]

From: Anton Vasilyev <vasilyev@ispras.ru>

[ Upstream commit 5958fde72d04e7b8c6de3669d1f794a90997e3eb ]

goldfish_fb_probe() allocates memory for fb, but goldfish_fb_remove() does
not have deallocation of fb, which leads to memory leak on probe/remove.

The patch adds deallocation into goldfish_fb_remove().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru>
Cc: Aleksandar Markovic <aleksandar.markovic@mips.com>
Cc: Miodrag Dinic <miodrag.dinic@mips.com>
Cc: Goran Ferenc <goran.ferenc@mips.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/video/fbdev/goldfishfb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/fbdev/goldfishfb.c b/drivers/video/fbdev/goldfishfb.c
index 7f6c9e6cfc6c..14a93cb21310 100644
--- a/drivers/video/fbdev/goldfishfb.c
+++ b/drivers/video/fbdev/goldfishfb.c
@@ -301,6 +301,7 @@ static int goldfish_fb_remove(struct platform_device *pdev)
 	dma_free_coherent(&pdev->dev, framesize, (void *)fb->fb.screen_base,
 						fb->fb.fix.smem_start);
 	iounmap(fb->reg_base);
+	kfree(fb);
 	return 0;
 }
 
-- 
2.17.1

[PATCH AUTOSEL 4.9 21/43] fbdev/via: fix defined but not used warning

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit b6566b47a67e07fdca44cf51abb14e2fbe17d3eb ]

Fix a build warning in viafbdev.c when CONFIG_PROC_FS is not enabled
by marking the unused function as __maybe_unused.

../drivers/video/fbdev/via/viafbdev.c:1471:12: warning: 'viafb_sup_odev_proc_show' defined but not used [-Wunused-function]

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/video/fbdev/via/viafbdev.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/via/viafbdev.c b/drivers/video/fbdev/via/viafbdev.c
index badee04ef496..71b5dca95bdb 100644
--- a/drivers/video/fbdev/via/viafbdev.c
+++ b/drivers/video/fbdev/via/viafbdev.c
@@ -19,6 +19,7 @@
  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */
 
+#include <linux/compiler.h>
 #include <linux/module.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
@@ -1468,7 +1469,7 @@ static const struct file_operations viafb_vt1636_proc_fops = {
 
 #endif /* CONFIG_FB_VIA_DIRECT_PROCFS */
 
-static int viafb_sup_odev_proc_show(struct seq_file *m, void *v)
+static int __maybe_unused viafb_sup_odev_proc_show(struct seq_file *m, void *v)
 {
 	via_odev_to_seq(m, supported_odev_map[
 		viaparinfo->shared->chip_info.gfx_chip_name]);
-- 
2.17.1

[PATCH AUTOSEL 4.9 22/43] perf powerpc: Fix callchain ip filtering when return address is in a register

[Sasha Levin]

From: Sandipan Das <sandipan@linux.ibm.com>

[ Upstream commit 9068533e4f470daf2b0f29c71d865990acd8826e ]

For powerpc64, perf will filter out the second entry in the callchain,
i.e. the LR value, if the return address of the function corresponding
to the probed location has already been saved on its caller's stack.

The state of the return address is determined using debug information.
At any point within a function, if the return address is already saved
somewhere, a DWARF expression can tell us about its location. If the
return address in still in LR only, no DWARF expression would exist.

Typically, the instructions in a function's prologue first copy the LR
value to R0 and then pushes R0 on to the stack. If LR has already been
copied to R0 but R0 is yet to be pushed to the stack, we can still get a
DWARF expression that says that the return address is in R0. This is
indicating that getting a DWARF expression for the return address does
not guarantee the fact that it has already been saved on the stack.

This can be observed on a powerpc64le system running Fedora 27 as shown
below.

  # objdump -d /usr/lib64/libc-2.26.so | less
  ...
  000000000015af20 <inet_pton>:
    15af20:       0b 00 4c 3c     addis   r2,r12,11
    15af24:       e0 c1 42 38     addi    r2,r2,-15904
    15af28:       a6 02 08 7c     mflr    r0
    15af2c:       f0 ff c1 fb     std     r30,-16(r1)
    15af30:       f8 ff e1 fb     std     r31,-8(r1)
    15af34:       78 1b 7f 7c     mr      r31,r3
    15af38:       78 23 83 7c     mr      r3,r4
    15af3c:       78 2b be 7c     mr      r30,r5
    15af40:       10 00 01 f8     std     r0,16(r1)
    15af44:       c1 ff 21 f8     stdu    r1,-64(r1)
    15af48:       28 00 81 f8     std     r4,40(r1)
  ...

  # readelf --debug-dump=frames-interp /usr/lib64/libc-2.26.so | less
  ...
  00027024 0000000000000024 00027028 FDE cie=00000000 pc=000000000015af20..000000000015af88
     LOC           CFA      r30   r31   ra
  000000000015af20 r1+0     u     u     u
  000000000015af34 r1+0     c-16  c-8   r0
  000000000015af48 r1+64    c-16  c-8   c+16
  000000000015af5c r1+0     c-16  c-8   c+16
  000000000015af78 r1+0     u     u
  ...

  # perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x18
  # perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1
  # perf script

Before:

  ping  2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38)
              7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so)
              7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
                 12f152d70 _init+0xbfc (/usr/bin/ping)
              7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
              7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
                         0 [unknown] ([unknown])

After:

  ping  2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38)
              7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so)
              7fff7e26fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)
              7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
                 12f152d70 _init+0xbfc (/usr/bin/ping)
              7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
              7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
                         0 [unknown] ([unknown])

Reported-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Maynard Johnson <maynard@us.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/66e848a7bdf2d43b39210a705ff6d828a0865661.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/arch/powerpc/util/skip-callchain-idx.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/tools/perf/arch/powerpc/util/skip-callchain-idx.c b/tools/perf/arch/powerpc/util/skip-callchain-idx.c
index bd630c222e65..9d1f6e976a5a 100644
--- a/tools/perf/arch/powerpc/util/skip-callchain-idx.c
+++ b/tools/perf/arch/powerpc/util/skip-callchain-idx.c
@@ -58,9 +58,13 @@ static int check_return_reg(int ra_regno, Dwarf_Frame *frame)
 	}
 
 	/*
-	 * Check if return address is on the stack.
+	 * Check if return address is on the stack. If return address
+	 * is in a register (typically R0), it is yet to be saved on
+	 * the stack.
 	 */
-	if (nops != 0 || ops != NULL)
+	if ((nops != 0 || ops != NULL) &&
+		!(nops == 1 && ops[0].atom == DW_OP_regx &&
+			ops[0].number2 == 0 && ops[0].offset == 0))
 		return 0;
 
 	/*
-- 
2.17.1

[PATCH AUTOSEL 4.9 24/43] fbdev: Distinguish between interlaced and progressive modes

[Sasha Levin]

From: Fredrik Noring <noring@nocrew.org>

[ Upstream commit 1ba0a59cea41ea05fda92daaf2a2958a2246b9cf ]

I discovered the problem when developing a frame buffer driver for the
PlayStation 2 (not yet merged), using the following video modes for the
PlayStation 3 in drivers/video/fbdev/ps3fb.c:

    }, {
        /* 1080if */
        "1080if", 50, 1920, 1080, 13468, 148, 484, 36, 4, 88, 5,
        FB_SYNC_BROADCAST, FB_VMODE_INTERLACED
    }, {
        /* 1080pf */
        "1080pf", 50, 1920, 1080, 6734, 148, 484, 36, 4, 88, 5,
        FB_SYNC_BROADCAST, FB_VMODE_NONINTERLACED
    },

In ps3fb_probe, the mode_option module parameter is used with fb_find_mode
but it can only select the interlaced variant of 1920x1080 since the loop
matching the modes does not take the difference between interlaced and
progressive modes into account.

In short, without the patch, progressive 1920x1080 cannot be chosen as a
mode_option parameter since fb_find_mode (falsely) thinks interlace is a
perfect match.

Signed-off-by: Fredrik Noring <noring@nocrew.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
[b.zolnierkie: updated patch description]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/video/fbdev/core/modedb.c | 41 ++++++++++++++++++++++---------
 1 file changed, 30 insertions(+), 11 deletions(-)

diff --git a/drivers/video/fbdev/core/modedb.c b/drivers/video/fbdev/core/modedb.c
index 2510fa728d77..de119f11b78f 100644
--- a/drivers/video/fbdev/core/modedb.c
+++ b/drivers/video/fbdev/core/modedb.c
@@ -644,7 +644,7 @@ static int fb_try_mode(struct fb_var_screeninfo *var, struct fb_info *info,
  *
  *     Valid mode specifiers for @mode_option:
  *
- *     <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m] or
+ *     <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][p][m] or
  *     <name>[-<bpp>][@<refresh>]
  *
  *     with <xres>, <yres>, <bpp> and <refresh> decimal numbers and
@@ -653,10 +653,10 @@ static int fb_try_mode(struct fb_var_screeninfo *var, struct fb_info *info,
  *      If 'M' is present after yres (and before refresh/bpp if present),
  *      the function will compute the timings using VESA(tm) Coordinated
  *      Video Timings (CVT).  If 'R' is present after 'M', will compute with
- *      reduced blanking (for flatpanels).  If 'i' is present, compute
- *      interlaced mode.  If 'm' is present, add margins equal to 1.8%
- *      of xres rounded down to 8 pixels, and 1.8% of yres. The char
- *      'i' and 'm' must be after 'M' and 'R'. Example:
+ *      reduced blanking (for flatpanels).  If 'i' or 'p' are present, compute
+ *      interlaced or progressive mode.  If 'm' is present, add margins equal
+ *      to 1.8% of xres rounded down to 8 pixels, and 1.8% of yres. The chars
+ *      'i', 'p' and 'm' must be after 'M' and 'R'. Example:
  *
  *      1024x768MR-8@60m - Reduced blank with margins at 60Hz.
  *
@@ -697,7 +697,8 @@ int fb_find_mode(struct fb_var_screeninfo *var,
 		unsigned int namelen = strlen(name);
 		int res_specified = 0, bpp_specified = 0, refresh_specified = 0;
 		unsigned int xres = 0, yres = 0, bpp = default_bpp, refresh = 0;
-		int yres_specified = 0, cvt = 0, rb = 0, interlace = 0;
+		int yres_specified = 0, cvt = 0, rb = 0;
+		int interlace_specified = 0, interlace = 0;
 		int margins = 0;
 		u32 best, diff, tdiff;
 
@@ -748,9 +749,17 @@ int fb_find_mode(struct fb_var_screeninfo *var,
 				if (!cvt)
 					margins = 1;
 				break;
+			case 'p':
+				if (!cvt) {
+					interlace = 0;
+					interlace_specified = 1;
+				}
+				break;
 			case 'i':
-				if (!cvt)
+				if (!cvt) {
 					interlace = 1;
+					interlace_specified = 1;
+				}
 				break;
 			default:
 				goto done;
@@ -819,11 +828,21 @@ int fb_find_mode(struct fb_var_screeninfo *var,
 			if ((name_matches(db[i], name, namelen) ||
 			     (res_specified && res_matches(db[i], xres, yres))) &&
 			    !fb_try_mode(var, info, &db[i], bpp)) {
-				if (refresh_specified && db[i].refresh == refresh)
-					return 1;
+				const int db_interlace = (db[i].vmode &
+					FB_VMODE_INTERLACED ? 1 : 0);
+				int score = abs(db[i].refresh - refresh);
+
+				if (interlace_specified)
+					score += abs(db_interlace - interlace);
+
+				if (!interlace_specified ||
+				    db_interlace == interlace)
+					if (refresh_specified &&
+					    db[i].refresh == refresh)
+						return 1;
 
-				if (abs(db[i].refresh - refresh) < diff) {
-					diff = abs(db[i].refresh - refresh);
+				if (score < diff) {
+					diff = score;
 					best = i;
 				}
 			}
-- 
2.17.1

[PATCH AUTOSEL 4.9 23/43] video: fbdev: pxafb: clear allocated memory for video modes

[Sasha Levin]

From: Daniel Mack <daniel@zonque.org>

[ Upstream commit b951d80aaf224b1f774e10def672f5e37488e4ee ]

When parsing the video modes from DT properties, make sure to zero out
memory before using it. This is important because not all fields in the mode
struct are explicitly initialized, even though they are used later on.

Fixes: 420a488278e86 ("video: fbdev: pxafb: initial devicetree conversion")
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/video/fbdev/pxafb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/fbdev/pxafb.c b/drivers/video/fbdev/pxafb.c
index ef73f14d7ba0..8503310a3816 100644
--- a/drivers/video/fbdev/pxafb.c
+++ b/drivers/video/fbdev/pxafb.c
@@ -2128,8 +2128,8 @@ static int of_get_pxafb_display(struct device *dev, struct device_node *disp,
 		return -EINVAL;
 
 	ret = -ENOMEM;
-	info->modes = kmalloc_array(timings->num_timings,
-				    sizeof(info->modes[0]), GFP_KERNEL);
+	info->modes = kcalloc(timings->num_timings, sizeof(info->modes[0]),
+			      GFP_KERNEL);
 	if (!info->modes)
 		goto out;
 	info->num_modes = timings->num_timings;
-- 
2.17.1

[PATCH AUTOSEL 4.9 25/43] ARM: exynos: Clear global variable on init error path

[Sasha Levin]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit cd4806911cee3901bc2b5eb95603cf1958720b57 ]

For most of Exynos SoCs, Power Management Unit (PMU) address space is
mapped into global variable 'pmu_base_addr' very early when initializing
PMU interrupt controller.  A lot of other machine code depends on it so
when doing iounmap() on this address, clear the global as well to avoid
usage of invalid value (pointing to unmapped memory region).

Properly mapped PMU address space is a requirement for all other machine
code so this fix is purely theoretical.  Boot will fail immediately in
many other places after following this error path.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/mach-exynos/suspend.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index 06332f626565..3e1430a886b2 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -252,6 +252,7 @@ static int __init exynos_pmu_irq_init(struct device_node *node,
 					  NULL);
 	if (!domain) {
 		iounmap(pmu_base_addr);
+		pmu_base_addr = NULL;
 		return -ENOMEM;
 	}
 
-- 
2.17.1

[PATCH AUTOSEL 4.9 26/43] perf powerpc: Fix callchain ip filtering

[Sasha Levin]

From: Sandipan Das <sandipan@linux.ibm.com>

[ Upstream commit c715fcfda5a08edabaa15508742be926b7ee51db ]

For powerpc64, redundant entries in the callchain are filtered out by
determining the state of the return address and the stack frame using
DWARF debug information.

For making these filtering decisions we must analyze the debug
information for the location corresponding to the program counter value,
i.e. the first entry in the callchain, and not the LR value; otherwise,
perf may filter out either the second or the third entry in the
callchain incorrectly.

This can be observed on a powerpc64le system running Fedora 27 as shown
below.

Case 1 - Attaching a probe at inet_pton+0x8 (binary offset 0x15af28).
         Return address is still in LR and a new stack frame is not yet
         allocated. The LR value, i.e. the second entry, should not be
	 filtered out.

  # objdump -d /usr/lib64/libc-2.26.so | less
  ...
  000000000010eb10 <gaih_inet.constprop.7>:
  ...
    10fa48:       78 bb e4 7e     mr      r4,r23
    10fa4c:       0a 00 60 38     li      r3,10
    10fa50:       d9 b4 04 48     bl      15af28 <inet_pton+0x8>
    10fa54:       00 00 00 60     nop
    10fa58:       ac f4 ff 4b     b       10ef04 <gaih_inet.constprop.7+0x3f4>
  ...
  0000000000110450 <getaddrinfo>:
  ...
    1105a8:       54 00 ff 38     addi    r7,r31,84
    1105ac:       58 00 df 38     addi    r6,r31,88
    1105b0:       69 e5 ff 4b     bl      10eb18 <gaih_inet.constprop.7+0x8>
    1105b4:       78 1b 71 7c     mr      r17,r3
    1105b8:       50 01 7f e8     ld      r3,336(r31)
  ...
  000000000015af20 <inet_pton>:
    15af20:       0b 00 4c 3c     addis   r2,r12,11
    15af24:       e0 c1 42 38     addi    r2,r2,-15904
    15af28:       a6 02 08 7c     mflr    r0
    15af2c:       f0 ff c1 fb     std     r30,-16(r1)
    15af30:       f8 ff e1 fb     std     r31,-8(r1)
  ...

  # perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x8
  # perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1
  # perf script

Before:

  ping  4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28)
              7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
              7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
                 13fb52d70 _init+0xbfc (/usr/bin/ping)
              7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
              7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
                         0 [unknown] ([unknown])

After:

  ping  4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28)
              7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so)
              7fffa7d6fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so)
              7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so)
                 13fb52d70 _init+0xbfc (/usr/bin/ping)
              7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
              7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
                         0 [unknown] ([unknown])

Case 2 - Attaching a probe at _int_malloc+0x180 (binary offset 0x9cf10).
         Return address in still in LR and a new stack frame has already
         been allocated but not used. The caller's caller, i.e. the third
	 entry, is invalid and should be filtered out and not the second
	 one.

  # objdump -d /usr/lib64/libc-2.26.so | less
  ...
  000000000009cd90 <_int_malloc>:
     9cd90:       17 00 4c 3c     addis   r2,r12,23
     9cd94:       70 a3 42 38     addi    r2,r2,-23696
     9cd98:       26 00 80 7d     mfcr    r12
     9cd9c:       f8 ff e1 fb     std     r31,-8(r1)
     9cda0:       17 00 e4 3b     addi    r31,r4,23
     9cda4:       d8 ff 61 fb     std     r27,-40(r1)
     9cda8:       78 23 9b 7c     mr      r27,r4
     9cdac:       1f 00 bf 2b     cmpldi  cr7,r31,31
     9cdb0:       f0 ff c1 fb     std     r30,-16(r1)
     9cdb4:       b0 ff c1 fa     std     r22,-80(r1)
     9cdb8:       78 1b 7e 7c     mr      r30,r3
     9cdbc:       08 00 81 91     stw     r12,8(r1)
     9cdc0:       11 ff 21 f8     stdu    r1,-240(r1)
     9cdc4:       4c 01 9d 41     bgt     cr7,9cf10 <_int_malloc+0x180>
     9cdc8:       20 00 a4 2b     cmpldi  cr7,r4,32
  ...
     9cf08:       00 00 00 60     nop
     9cf0c:       00 00 42 60     ori     r2,r2,0
     9cf10:       e4 06 ff 7b     rldicr  r31,r31,0,59
     9cf14:       40 f8 a4 7f     cmpld   cr7,r4,r31
     9cf18:       68 05 9d 41     bgt     cr7,9d480 <_int_malloc+0x6f0>
  ...
  000000000009e3c0 <tcache_init.part.4>:
  ...
     9e420:       40 02 80 38     li      r4,576
     9e424:       78 fb e3 7f     mr      r3,r31
     9e428:       71 e9 ff 4b     bl      9cd98 <_int_malloc+0x8>
     9e42c:       00 00 a3 2f     cmpdi   cr7,r3,0
     9e430:       78 1b 7e 7c     mr      r30,r3
  ...
  000000000009f7a0 <__libc_malloc>:
  ...
     9f8f8:       00 00 89 2f     cmpwi   cr7,r9,0
     9f8fc:       1c ff 9e 40     bne     cr7,9f818 <__libc_malloc+0x78>
     9f900:       c9 ea ff 4b     bl      9e3c8 <tcache_init.part.4+0x8>
     9f904:       00 00 00 60     nop
     9f908:       e8 90 22 e9     ld      r9,-28440(r2)
  ...

  # perf probe -x /usr/lib64/libc-2.26.so -a _int_malloc+0x180
  # perf record -e probe_libc:_int_malloc -g ./test-malloc
  # perf script

Before:

  test-malloc  6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10)
              7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so)
              7fffa6dd0000 [unknown] (/usr/lib64/libc-2.26.so)
              7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so)
              7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so)
                  100006b4 main+0x38 (/home/testuser/test-malloc)
              7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
              7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
                         0 [unknown] ([unknown])

After:

  test-malloc  6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10)
              7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so)
              7fffa6e6e42c tcache_init.part.4+0x6c (/usr/lib64/libc-2.26.so)
              7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so)
              7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so)
                  100006b4 main+0x38 (/home/sandipan/test-malloc)
              7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
              7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
                         0 [unknown] ([unknown])

Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Maynard Johnson <maynard@us.ibm.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Fixes: a60335ba3298 ("perf tools powerpc: Adjust callchain based on DWARF debug info")
Link: http://lkml.kernel.org/r/24bb726d91ed173aebc972ec3f41a2ef2249434e.1530724939.git.sandipan@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 tools/perf/arch/powerpc/util/skip-callchain-idx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/arch/powerpc/util/skip-callchain-idx.c b/tools/perf/arch/powerpc/util/skip-callchain-idx.c
index 9d1f6e976a5a..9a53f6e9ef43 100644
--- a/tools/perf/arch/powerpc/util/skip-callchain-idx.c
+++ b/tools/perf/arch/powerpc/util/skip-callchain-idx.c
@@ -250,7 +250,7 @@ int arch_skip_callchain_idx(struct thread *thread, struct ip_callchain *chain)
 	if (!chain || chain->nr < 3)
 		return skip_slot;
 
-	ip = chain->ips[2];
+	ip = chain->ips[1];
 
 	thread__find_addr_location(thread, PERF_RECORD_MISC_USER,
 			MAP__FUNCTION, ip, &al);
-- 
2.17.1

[PATCH AUTOSEL 4.9 28/43] MIPS: jz4740: Bump zload address

[Sasha Levin]

From: Paul Cercueil <paul@crapouillou.net>

[ Upstream commit c6ea7e9747318e5a6774995f4f8e3e0f7c0fa8ba ]

Having the zload address at 0x8060.0000 means the size of the
uncompressed kernel cannot be bigger than around 6 MiB, as it is
deflated at address 0x8001.0000.

This limit is too small; a kernel with some built-in drivers and things
like debugfs enabled will already be over 6 MiB in size, and so will
fail to extract properly.

To fix this, we bump the zload address from 0x8060.0000 to 0x8100.0000.

This is fine, as all the boards featuring Ingenic JZ SoCs have at least
32 MiB of RAM, and use u-boot or compatible bootloaders which won't
hardcode the load address but read it from the uImage's header.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/19787/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/mips/jz4740/Platform | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/jz4740/Platform b/arch/mips/jz4740/Platform
index 28448d358c10..a2a5a85ea1f9 100644
--- a/arch/mips/jz4740/Platform
+++ b/arch/mips/jz4740/Platform
@@ -1,4 +1,4 @@
 platform-$(CONFIG_MACH_INGENIC)	+= jz4740/
 cflags-$(CONFIG_MACH_INGENIC)	+= -I$(srctree)/arch/mips/include/asm/mach-jz4740
 load-$(CONFIG_MACH_INGENIC)	+= 0xffffffff80010000
-zload-$(CONFIG_MACH_INGENIC)	+= 0xffffffff80600000
+zload-$(CONFIG_MACH_INGENIC)	+= 0xffffffff81000000
-- 
2.17.1

[PATCH AUTOSEL 4.9 27/43] powerpc/powernv: opal_put_chars partial write fix

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit bd90284cc6c1c9e8e48c8eadd0c79574fcce0b81 ]

The intention here is to consume and discard the remaining buffer
upon error. This works if there has not been a previous partial write.
If there has been, then total_len is no longer total number of bytes
to copy. total_len is always "bytes left to copy", so it should be
added to written bytes.

This code may not be exercised any more if partial writes will not be
hit, but this is a small bugfix before a larger change.

Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/powerpc/platforms/powernv/opal.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index 6c9a65b52e63..7fb61ebc99a2 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -369,7 +369,7 @@ int opal_put_chars(uint32_t vtermno, const char *data, int total_len)
 		/* Closed or other error drop */
 		if (rc != OPAL_SUCCESS && rc != OPAL_BUSY &&
 		    rc != OPAL_BUSY_EVENT) {
-			written = total_len;
+			written += total_len;
 			break;
 		}
 		if (rc == OPAL_SUCCESS) {
-- 
2.17.1

[PATCH AUTOSEL 4.9 29/43] mac80211: restrict delayed tailroom needed decrement

[Sasha Levin]

From: Manikanta Pubbisetty <mpubbise@codeaurora.org>

[ Upstream commit 133bf90dbb8b873286f8ec2e81ba26e863114b8c ]

As explained in ieee80211_delayed_tailroom_dec(), during roam,
keys of the old AP will be destroyed and new keys will be
installed. Deletion of the old key causes
crypto_tx_tailroom_needed_cnt to go from 1 to 0 and the new key
installation causes a transition from 0 to 1.

Whenever crypto_tx_tailroom_needed_cnt transitions from 0 to 1,
we invoke synchronize_net(); the reason for doing this is to avoid
a race in the TX path as explained in increment_tailroom_need_count().
This synchronize_net() operation can be slow and can affect the station
roam time. To avoid this, decrementing the crypto_tx_tailroom_needed_cnt
is delayed for a while so that upon installation of new key the
transition would be from 1 to 2 instead of 0 to 1 and thereby
improving the roam time.

This is all correct for a STA iftype, but deferring the tailroom_needed
decrement for other iftypes may be unnecessary.

For example, let's consider the case of a 4-addr client connecting to
an AP for which AP_VLAN interface is also created, let the initial
value for tailroom_needed on the AP be 1.

* 4-addr client connects to the AP (AP: tailroom_needed = 1)
* AP will clear old keys, delay decrement of tailroom_needed count
* AP_VLAN is created, it takes the tailroom count from master
  (AP_VLAN: tailroom_needed = 1, AP: tailroom_needed = 1)
* Install new key for the station, assume key is plumbed in the HW,
  there won't be any change in tailroom_needed count on AP iface
* Delayed decrement of tailroom_needed count on AP
  (AP: tailroom_needed = 0, AP_VLAN: tailroom_needed = 1)

Because of the delayed decrement on AP iface, tailroom_needed count goes
out of sync between AP(master iface) and AP_VLAN(slave iface) and
there would be unnecessary tailroom created for the packets going
through AP_VLAN iface.

Also, WARN_ONs were observed while trying to bring down the AP_VLAN
interface:
(warn_slowpath_common) (warn_slowpath_null+0x18/0x20)
(warn_slowpath_null) (ieee80211_free_keys+0x114/0x1e4)
(ieee80211_free_keys) (ieee80211_del_virtual_monitor+0x51c/0x850)
(ieee80211_del_virtual_monitor) (ieee80211_stop+0x30/0x3c)
(ieee80211_stop) (__dev_close_many+0x94/0xb8)
(__dev_close_many) (dev_close_many+0x5c/0xc8)

Restricting delayed decrement to station interface alone fixes the problem
and it makes sense to do so because delayed decrement is done to improve
roam time which is applicable only for client devices.

Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 net/mac80211/cfg.c |  2 +-
 net/mac80211/key.c | 24 +++++++++++++++---------
 2 files changed, 16 insertions(+), 10 deletions(-)

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index d7801f6877af..e63fd12f923a 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -454,7 +454,7 @@ static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev,
 		goto out_unlock;
 	}
 
-	ieee80211_key_free(key, true);
+	ieee80211_key_free(key, sdata->vif.type == NL80211_IFTYPE_STATION);
 
 	ret = 0;
  out_unlock:
diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index 4c625a325ce2..6e02f8dfce2b 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -648,11 +648,15 @@ int ieee80211_key_link(struct ieee80211_key *key,
 {
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_key *old_key;
-	int idx, ret;
-	bool pairwise;
-
-	pairwise = key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE;
-	idx = key->conf.keyidx;
+	int idx = key->conf.keyidx;
+	bool pairwise = key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE;
+	/*
+	 * We want to delay tailroom updates only for station - in that
+	 * case it helps roaming speed, but in other cases it hurts and
+	 * can cause warnings to appear.
+	 */
+	bool delay_tailroom = sdata->vif.type == NL80211_IFTYPE_STATION;
+	int ret;
 
 	mutex_lock(&sdata->local->key_mtx);
 
@@ -680,14 +684,14 @@ int ieee80211_key_link(struct ieee80211_key *key,
 	increment_tailroom_need_count(sdata);
 
 	ieee80211_key_replace(sdata, sta, pairwise, old_key, key);
-	ieee80211_key_destroy(old_key, true);
+	ieee80211_key_destroy(old_key, delay_tailroom);
 
 	ieee80211_debugfs_key_add(key);
 
 	if (!local->wowlan) {
 		ret = ieee80211_key_enable_hw_accel(key);
 		if (ret)
-			ieee80211_key_free(key, true);
+			ieee80211_key_free(key, delay_tailroom);
 	} else {
 		ret = 0;
 	}
@@ -922,7 +926,8 @@ void ieee80211_free_sta_keys(struct ieee80211_local *local,
 		ieee80211_key_replace(key->sdata, key->sta,
 				key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE,
 				key, NULL);
-		__ieee80211_key_destroy(key, true);
+		__ieee80211_key_destroy(key, key->sdata->vif.type ==
+					NL80211_IFTYPE_STATION);
 	}
 
 	for (i = 0; i < NUM_DEFAULT_KEYS; i++) {
@@ -932,7 +937,8 @@ void ieee80211_free_sta_keys(struct ieee80211_local *local,
 		ieee80211_key_replace(key->sdata, key->sta,
 				key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE,
 				key, NULL);
-		__ieee80211_key_destroy(key, true);
+		__ieee80211_key_destroy(key, key->sdata->vif.type ==
+					NL80211_IFTYPE_STATION);
 	}
 
 	mutex_unlock(&local->key_mtx);
-- 
2.17.1

[PATCH AUTOSEL 4.9 30/43] Smack: Fix handling of IPv4 traffic received by PF_INET6 sockets

[Sasha Levin]

From: Piotr Sawicki <p.sawicki2@partner.samsung.com>

[ Upstream commit 129a99890936766f4b69b9da7ed88366313a9210 ]

A socket which has sk_family set to PF_INET6 is able to receive not
only IPv6 but also IPv4 traffic (IPv4-mapped IPv6 addresses).

Prior to this patch, the smk_skb_to_addr_ipv6() could have been
called for socket buffers containing IPv4 packets, in result such
traffic was allowed.

Signed-off-by: Piotr Sawicki <p.sawicki2@partner.samsung.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 security/smack/smack_lsm.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index ca3ea985c100..fb7c534fb57d 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -3966,15 +3966,19 @@ static int smack_socket_sock_rcv_skb(struct sock *sk, struct sk_buff *skb)
 	struct smack_known *skp = NULL;
 	int rc = 0;
 	struct smk_audit_info ad;
+	u16 family = sk->sk_family;
 #ifdef CONFIG_AUDIT
 	struct lsm_network_audit net;
 #endif
 #if IS_ENABLED(CONFIG_IPV6)
 	struct sockaddr_in6 sadd;
 	int proto;
+
+	if (family == PF_INET6 && skb->protocol == htons(ETH_P_IP))
+		family = PF_INET;
 #endif /* CONFIG_IPV6 */
 
-	switch (sk->sk_family) {
+	switch (family) {
 	case PF_INET:
 #ifdef CONFIG_SECURITY_SMACK_NETFILTER
 		/*
@@ -3992,7 +3996,7 @@ static int smack_socket_sock_rcv_skb(struct sock *sk, struct sk_buff *skb)
 		 */
 		netlbl_secattr_init(&secattr);
 
-		rc = netlbl_skbuff_getattr(skb, sk->sk_family, &secattr);
+		rc = netlbl_skbuff_getattr(skb, family, &secattr);
 		if (rc == 0)
 			skp = smack_from_secattr(&secattr, ssp);
 		else
@@ -4005,7 +4009,7 @@ static int smack_socket_sock_rcv_skb(struct sock *sk, struct sk_buff *skb)
 #endif
 #ifdef CONFIG_AUDIT
 		smk_ad_init_net(&ad, __func__, LSM_AUDIT_DATA_NET, &net);
-		ad.a.u.net->family = sk->sk_family;
+		ad.a.u.net->family = family;
 		ad.a.u.net->netif = skb->skb_iif;
 		ipv4_skb_to_auditdata(skb, &ad.a, NULL);
 #endif
@@ -4019,7 +4023,7 @@ static int smack_socket_sock_rcv_skb(struct sock *sk, struct sk_buff *skb)
 		rc = smk_bu_note("IPv4 delivery", skp, ssp->smk_in,
 					MAY_WRITE, rc);
 		if (rc != 0)
-			netlbl_skbuff_err(skb, sk->sk_family, rc, 0);
+			netlbl_skbuff_err(skb, family, rc, 0);
 		break;
 #if IS_ENABLED(CONFIG_IPV6)
 	case PF_INET6:
@@ -4035,7 +4039,7 @@ static int smack_socket_sock_rcv_skb(struct sock *sk, struct sk_buff *skb)
 			skp = smack_net_ambient;
 #ifdef CONFIG_AUDIT
 		smk_ad_init_net(&ad, __func__, LSM_AUDIT_DATA_NET, &net);
-		ad.a.u.net->family = sk->sk_family;
+		ad.a.u.net->family = family;
 		ad.a.u.net->netif = skb->skb_iif;
 		ipv6_skb_to_auditdata(skb, &ad.a, NULL);
 #endif /* CONFIG_AUDIT */
-- 
2.17.1

[PATCH AUTOSEL 4.9 31/43] wan/fsl_ucc_hdlc: use IS_ERR_VALUE() to check return value of qe_muram_alloc

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit fd800f646402c0f85547166b59ca065175928b7b ]

qe_muram_alloc return a unsigned long integer,which should not
compared with zero. check it using IS_ERR_VALUE() to fix this.

Fixes: c19b6d246a35 ("drivers/net: support hdlc function for QE-UCC")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/wan/fsl_ucc_hdlc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wan/fsl_ucc_hdlc.c b/drivers/net/wan/fsl_ucc_hdlc.c
index a8bd68f252e9..7a62316c570d 100644
--- a/drivers/net/wan/fsl_ucc_hdlc.c
+++ b/drivers/net/wan/fsl_ucc_hdlc.c
@@ -161,7 +161,7 @@ static int uhdlc_init(struct ucc_hdlc_private *priv)
 	priv->ucc_pram_offset = qe_muram_alloc(sizeof(struct ucc_hdlc_param),
 				ALIGNMENT_OF_UCC_HDLC_PRAM);
 
-	if (priv->ucc_pram_offset < 0) {
+	if (IS_ERR_VALUE(priv->ucc_pram_offset)) {
 		dev_err(priv->dev, "Can not allocate MURAM for hdlc parameter.\n");
 		ret = -ENOMEM;
 		goto free_tx_bd;
@@ -197,14 +197,14 @@ static int uhdlc_init(struct ucc_hdlc_private *priv)
 
 	/* Alloc riptr, tiptr */
 	riptr = qe_muram_alloc(32, 32);
-	if (riptr < 0) {
+	if (IS_ERR_VALUE(riptr)) {
 		dev_err(priv->dev, "Cannot allocate MURAM mem for Receive internal temp data pointer\n");
 		ret = -ENOMEM;
 		goto free_tx_skbuff;
 	}
 
 	tiptr = qe_muram_alloc(32, 32);
-	if (tiptr < 0) {
+	if (IS_ERR_VALUE(tiptr)) {
 		dev_err(priv->dev, "Cannot allocate MURAM mem for Transmit internal temp data pointer\n");
 		ret = -ENOMEM;
 		goto free_riptr;
-- 
2.17.1

[PATCH AUTOSEL 4.9 32/43] efi/arm: preserve early mapping of UEFI memory map longer for BGRT

[Sasha Levin]

From: Ard Biesheuvel <ard.biesheuvel@linaro.org>

[ Upstream commit 3ea86495aef2f6de26b7cb1599ba350dd6a0c521 ]

The BGRT code validates the contents of the table against the UEFI
memory map, and so it expects it to be mapped when the code runs.

On ARM, this is currently not the case, since we tear down the early
mapping after efi_init() completes, and only create the permanent
mapping in arm_enable_runtime_services(), which executes as an early
initcall, but still leaves a window where the UEFI memory map is not
mapped.

So move the call to efi_memmap_unmap() from efi_init() to
arm_enable_runtime_services().

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[will: fold in EFI_MEMMAP attribute check from Ard]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/firmware/efi/arm-init.c    | 1 -
 drivers/firmware/efi/arm-runtime.c | 4 +++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/efi/arm-init.c b/drivers/firmware/efi/arm-init.c
index 8efe13075c92..1d1c9693ebfb 100644
--- a/drivers/firmware/efi/arm-init.c
+++ b/drivers/firmware/efi/arm-init.c
@@ -250,7 +250,6 @@ void __init efi_init(void)
 	reserve_regions();
 	efi_memattr_init();
 	efi_esrt_init();
-	efi_memmap_unmap();
 
 	memblock_reserve(params.mmap & PAGE_MASK,
 			 PAGE_ALIGN(params.mmap_size +
diff --git a/drivers/firmware/efi/arm-runtime.c b/drivers/firmware/efi/arm-runtime.c
index 6bdf39e1e385..4d788e0debfe 100644
--- a/drivers/firmware/efi/arm-runtime.c
+++ b/drivers/firmware/efi/arm-runtime.c
@@ -118,11 +118,13 @@ static int __init arm_enable_runtime_services(void)
 {
 	u64 mapsize;
 
-	if (!efi_enabled(EFI_BOOT)) {
+	if (!efi_enabled(EFI_BOOT) || !efi_enabled(EFI_MEMMAP)) {
 		pr_info("EFI services will not be available.\n");
 		return 0;
 	}
 
+	efi_memmap_unmap();
+
 	if (efi_runtime_disabled()) {
 		pr_info("EFI runtime services will be disabled.\n");
 		return 0;
-- 
2.17.1

[PATCH AUTOSEL 4.9 33/43] nfp: avoid buffer leak when FW communication fails

[Sasha Levin]

From: Jakub Kicinski <jakub.kicinski@netronome.com>

[ Upstream commit 07300f774fec9519663a597987a4083225588be4 ]

After device is stopped we reset the rings by moving all free buffers
to positions [0, cnt - 2], and clear the position cnt - 1 in the ring.
We then proceed to clear the read/write pointers.  This means that if
we try to reset the ring again the code will assume that the next to
fill buffer is at position 0 and swap it with cnt - 1.  Since we
previously cleared position cnt - 1 it will lead to leaking the first
buffer and leaving ring in a bad state.

This scenario can only happen if FW communication fails, in which case
the ring will never be used again, so the fact it's in a bad state will
not be noticed.  Buffer leak is the only problem.  Don't try to move
buffers in the ring if the read/write pointers indicate the ring was
never used or have already been reset.

nfp_net_clear_config_and_disable() is now fully idempotent.

Found by code inspection, FW communication failures are very rare,
and reconfiguring a live device is not common either, so it's unlikely
anyone has ever noticed the leak.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/ethernet/netronome/nfp/nfp_net_common.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c
index eee6e59e6cf3..2e8703da536d 100644
--- a/drivers/net/ethernet/netronome/nfp/nfp_net_common.c
+++ b/drivers/net/ethernet/netronome/nfp/nfp_net_common.c
@@ -990,7 +990,7 @@ static void nfp_net_tx_complete(struct nfp_net_tx_ring *tx_ring)
  * @nn:		NFP Net device
  * @tx_ring:	TX ring structure
  *
- * Assumes that the device is stopped
+ * Assumes that the device is stopped, must be idempotent.
  */
 static void
 nfp_net_tx_ring_reset(struct nfp_net *nn, struct nfp_net_tx_ring *tx_ring)
@@ -1144,13 +1144,18 @@ static void nfp_net_rx_give_one(struct nfp_net_rx_ring *rx_ring,
  * nfp_net_rx_ring_reset() - Reflect in SW state of freelist after disable
  * @rx_ring:	RX ring structure
  *
- * Warning: Do *not* call if ring buffers were never put on the FW freelist
- *	    (i.e. device was not enabled)!
+ * Assumes that the device is stopped, must be idempotent.
  */
 static void nfp_net_rx_ring_reset(struct nfp_net_rx_ring *rx_ring)
 {
 	unsigned int wr_idx, last_idx;
 
+	/* wr_p == rd_p means ring was never fed FL bufs.  RX rings are always
+	 * kept at cnt - 1 FL bufs.
+	 */
+	if (rx_ring->wr_p == 0 && rx_ring->rd_p == 0)
+		return;
+
 	/* Move the empty entry to the end of the list */
 	wr_idx = rx_ring->wr_p % rx_ring->cnt;
 	last_idx = rx_ring->cnt - 1;
@@ -1919,6 +1924,8 @@ static void nfp_net_vec_clear_ring_data(struct nfp_net *nn, unsigned int idx)
 /**
  * nfp_net_clear_config_and_disable() - Clear control BAR and disable NFP
  * @nn:      NFP Net device to reconfigure
+ *
+ * Warning: must be fully idempotent.
  */
 static void nfp_net_clear_config_and_disable(struct nfp_net *nn)
 {
-- 
2.17.1

[PATCH AUTOSEL 4.9 34/43] xen-netfront: fix queue name setting

[Sasha Levin]

From: Vitaly Kuznetsov <vkuznets@redhat.com>

[ Upstream commit 2d408c0d4574b01b9ed45e02516888bf925e11a9 ]

Commit f599c64fdf7d ("xen-netfront: Fix race between device setup and
open") changed the initialization order: xennet_create_queues() now
happens before we do register_netdev() so using netdev->name in
xennet_init_queue() is incorrect, we end up with the following in
/proc/interrupts:

 60:        139          0   xen-dyn    -event     eth%d-q0-tx
 61:        265          0   xen-dyn    -event     eth%d-q0-rx
 62:        234          0   xen-dyn    -event     eth%d-q1-tx
 63:          1          0   xen-dyn    -event     eth%d-q1-rx

and this looks ugly. Actually, using early netdev name (even when it's
already set) is also not ideal: nowadays we tend to rename eth devices
and queue name may end up not corresponding to the netdev name.

Use nodename from xenbus device for queue naming: this can't change in VM's
lifetime. Now /proc/interrupts looks like

 62:        202          0   xen-dyn    -event     device/vif/0-q0-tx
 63:        317          0   xen-dyn    -event     device/vif/0-q0-rx
 64:        262          0   xen-dyn    -event     device/vif/0-q1-tx
 65:         17          0   xen-dyn    -event     device/vif/0-q1-rx

Fixes: f599c64fdf7d ("xen-netfront: Fix race between device setup and open")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/net/xen-netfront.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index cd2c6ffdbdde..2cf1b06a2493 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -1630,7 +1630,7 @@ static int xennet_init_queue(struct netfront_queue *queue)
 		    (unsigned long)queue);
 
 	snprintf(queue->name, sizeof(queue->name), "%s-q%u",
-		 queue->info->netdev->name, queue->id);
+		 queue->info->xbdev->nodename, queue->id);
 
 	/* Initialise tx_skbs as a free chain containing every entry. */
 	queue->tx_skb_freelist = 0;
-- 
2.17.1

[PATCH AUTOSEL 4.9 36/43] ARM: dts: qcom: msm8974-hammerhead: increase load on l20 for sdhci

[Sasha Levin]

From: Bhushan Shah <bshah@kde.org>

[ Upstream commit 03864e57770a9541e7ff3990bacf2d9a2fffcd5d ]

The kernel would not boot on the hammerhead hardware due to the
following error:

mmc0: Timeout waiting for hardware interrupt.
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr:  0x00000200 | Version:  0x00003802
mmc0: sdhci: Blk size:  0x00000200 | Blk cnt:  0x00000200
mmc0: sdhci: Argument:  0x00000000 | Trn mode: 0x00000023
mmc0: sdhci: Present:   0x03e80000 | Host ctl: 0x00000034
mmc0: sdhci: Power:     0x00000001 | Blk gap:  0x00000000
mmc0: sdhci: Wake-up:   0x00000000 | Clock:    0x00000007
mmc0: sdhci: Timeout:   0x0000000e | Int stat: 0x00000000
mmc0: sdhci: Int enab:  0x02ff900b | Sig enab: 0x02ff100b
mmc0: sdhci: AC12 err:  0x00000000 | Slot int: 0x00000000
mmc0: sdhci: Caps:      0x642dc8b2 | Caps_1:   0x00008007
mmc0: sdhci: Cmd:       0x00000c1b | Max curr: 0x00000000
mmc0: sdhci: Resp[0]:   0x00000c00 | Resp[1]:  0x00000000
mmc0: sdhci: Resp[2]:   0x00000000 | Resp[3]:  0x00000000
mmc0: sdhci: Host ctl2: 0x00000008
mmc0: sdhci: ADMA Err:  0x00000000 | ADMA Ptr: 0x70040220
mmc0: sdhci: ============================================
mmc0: Card stuck in wrong state! mmcblk0 card_busy_detect status: 0xe00
mmc0: cache flush error -110
mmc0: Reset 0x1 never completed.

This patch increases the load on l20 to 0.2 amps for the sdhci
and allows the device to boot normally.

Signed-off-by: Bhushan Shah <bshah@kde.org>
Signed-off-by: Brian Masney <masneyb@onstation.org>
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index c0fb4a698c56..386b93c06a8c 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -188,6 +188,8 @@
 						regulator-max-microvolt = <2950000>;
 
 						regulator-boot-on;
+						regulator-system-load = <200000>;
+						regulator-allow-set-load;
 					};
 
 					l21 {
-- 
2.17.1

[PATCH AUTOSEL 4.9 35/43] arm64: dts: qcom: db410c: Fix Bluetooth LED trigger

[Sasha Levin]

From: Loic Poulain <loic.poulain@linaro.org>

[ Upstream commit e53db018315b7660bb7000a29e79faff2496c2c2 ]

Current LED trigger, 'bt', is not known/used by any existing driver.
Fix this by renaming it to 'bluetooth-power' trigger which is
controlled by the Bluetooth subsystem.

Fixes: 9943230c8860 ("arm64: dts: qcom: Add apq8016-sbc board LED's related device nodes")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index bb062b547110..601be6127628 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -170,7 +170,7 @@
 			led@6 {
 				label = "apq8016-sbc:blue:bt";
 				gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "bt";
+				linux,default-trigger = "bluetooth-power";
 				default-state = "off";
 			};
 		};
-- 
2.17.1

[PATCH AUTOSEL 4.9 37/43] s390/qeth: fix race in used-buffer accounting

[Sasha Levin]

From: Julian Wiedmann <jwi@linux.ibm.com>

[ Upstream commit a702349a4099cd5a7bab0904689d8e0bf8dcd622 ]

By updating q->used_buffers only _after_ do_QDIO() has completed, there
is a potential race against the buffer's TX completion. In the unlikely
case that the TX completion path wins, qeth_qdio_output_handler() would
decrement the counter before qeth_flush_buffers() even incremented it.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/s390/net/qeth_core_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 283416aefa56..258a72869f57 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3499,13 +3499,14 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
 	qdio_flags = QDIO_FLAG_SYNC_OUTPUT;
 	if (atomic_read(&queue->set_pci_flags_count))
 		qdio_flags |= QDIO_FLAG_PCI_OUT;
+	atomic_add(count, &queue->used_buffers);
+
 	rc = do_QDIO(CARD_DDEV(queue->card), qdio_flags,
 		     queue->queue_no, index, count);
 	if (queue->card->options.performance_stats)
 		queue->card->perf_stats.outbound_do_qdio_time +=
 			qeth_get_micros() -
 			queue->card->perf_stats.outbound_do_qdio_start_time;
-	atomic_add(count, &queue->used_buffers);
 	if (rc) {
 		queue->card->stats.tx_errors += count;
 		/* ignore temporary SIGA errors without busy condition */
-- 
2.17.1

[PATCH AUTOSEL 4.9 39/43] platform/x86: toshiba_acpi: Fix defined but not used build warnings

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit c2e2a618eb7104e18fdcf739d4d911563812a81c ]

Fix a build warning in toshiba_acpi.c when CONFIG_PROC_FS is not enabled
by marking the unused function as __maybe_unused.

../drivers/platform/x86/toshiba_acpi.c:1685:12: warning: 'version_proc_show' defined but not used [-Wunused-function]

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Azael Avalos <coproscefalo@gmail.com>
Cc: platform-driver-x86@vger.kernel.org
Cc: Andy Shevchenko <andy@infradead.org>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/platform/x86/toshiba_acpi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 074bf2fa1c55..79a228937072 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -34,6 +34,7 @@
 #define TOSHIBA_ACPI_VERSION	"0.24"
 #define PROC_INTERFACE_VERSION	1
 
+#include <linux/compiler.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -1687,7 +1688,7 @@ static const struct file_operations keys_proc_fops = {
 	.write		= keys_proc_write,
 };
 
-static int version_proc_show(struct seq_file *m, void *v)
+static int __maybe_unused version_proc_show(struct seq_file *m, void *v)
 {
 	seq_printf(m, "driver:                  %s\n", TOSHIBA_ACPI_VERSION);
 	seq_printf(m, "proc_interface:          %d\n", PROC_INTERFACE_VERSION);
-- 
2.17.1

[PATCH AUTOSEL 4.9 38/43] s390/qeth: reset layer2 attribute on layer switch

[Sasha Levin]

From: Julian Wiedmann <jwi@linux.ibm.com>

[ Upstream commit 70551dc46ffa3555a0b5f3545b0cd87ab67fd002 ]

After the subdriver's remove() routine has completed, the card's layer
mode is undetermined again. Reflect this in the layer2 field.

If qeth_dev_layer2_store() hits an error after remove() was called, the
card _always_ requires a setup(), even if the previous layer mode is
requested again.
But qeth_dev_layer2_store() bails out early if the requested layer mode
still matches the current one. So unless we reset the layer2 field,
re-probing the card back to its previous mode is currently not possible.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/s390/net/qeth_core_sys.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/s390/net/qeth_core_sys.c b/drivers/s390/net/qeth_core_sys.c
index db6a285d41e0..0a7a6da36dfd 100644
--- a/drivers/s390/net/qeth_core_sys.c
+++ b/drivers/s390/net/qeth_core_sys.c
@@ -423,6 +423,7 @@ static ssize_t qeth_dev_layer2_store(struct device *dev,
 	if (card->discipline) {
 		card->discipline->remove(card->gdev);
 		qeth_core_free_discipline(card);
+		card->options.layer2 = -1;
 	}
 
 	rc = qeth_core_load_discipline(card, newdis);
-- 
2.17.1

[PATCH AUTOSEL 4.9 39/43] platform/x86: toshiba_acpi: Fix defined but not used build warnings

[Sasha Levin]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit c2e2a618eb7104e18fdcf739d4d911563812a81c ]

Fix a build warning in toshiba_acpi.c when CONFIG_PROC_FS is not enabled
by marking the unused function as __maybe_unused.

../drivers/platform/x86/toshiba_acpi.c:1685:12: warning: 'version_proc_show' defined but not used [-Wunused-function]

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Azael Avalos <coproscefalo@gmail.com>
Cc: platform-driver-x86@vger.kernel.org
Cc: Andy Shevchenko <andy@infradead.org>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/platform/x86/toshiba_acpi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 074bf2fa1c55..79a228937072 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -34,6 +34,7 @@
 #define TOSHIBA_ACPI_VERSION	"0.24"
 #define PROC_INTERFACE_VERSION	1
 
+#include <linux/compiler.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
@@ -1687,7 +1688,7 @@ static const struct file_operations keys_proc_fops = {
 	.write		= keys_proc_write,
 };
 
-static int version_proc_show(struct seq_file *m, void *v)
+static int __maybe_unused version_proc_show(struct seq_file *m, void *v)
 {
 	seq_printf(m, "driver:                  %s\n", TOSHIBA_ACPI_VERSION);
 	seq_printf(m, "proc_interface:          %d\n", PROC_INTERFACE_VERSION);
-- 
2.17.1

[PATCH AUTOSEL 4.9 40/43] KVM: arm/arm64: Fix vgic init race

[Sasha Levin]

From: Christoffer Dall <christoffer.dall@arm.com>

[ Upstream commit 1d47191de7e15900f8fbfe7cccd7c6e1c2d7c31a ]

The vgic_init function can race with kvm_arch_vcpu_create() which does
not hold kvm_lock() and we therefore have no synchronization primitives
to ensure we're doing the right thing.

As the user is trying to initialize or run the VM while at the same time
creating more VCPUs, we just have to refuse to initialize the VGIC in
this case rather than silently failing with a broken VCPU.

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 virt/kvm/arm/vgic/vgic-init.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/virt/kvm/arm/vgic/vgic-init.c b/virt/kvm/arm/vgic/vgic-init.c
index 539d3f5cb619..80d8888549ee 100644
--- a/virt/kvm/arm/vgic/vgic-init.c
+++ b/virt/kvm/arm/vgic/vgic-init.c
@@ -241,6 +241,10 @@ int vgic_init(struct kvm *kvm)
 	if (vgic_initialized(kvm))
 		return 0;
 
+	/* Are we also in the middle of creating a VCPU? */
+	if (kvm->created_vcpus != atomic_read(&kvm->online_vcpus))
+		return -EBUSY;
+
 	/* freeze the number of spis */
 	if (!dist->nr_spis)
 		dist->nr_spis = VGIC_NR_IRQS_LEGACY - VGIC_NR_PRIVATE_IRQS;
-- 
2.17.1

[PATCH AUTOSEL 4.9 42/43] dmaengine: mv_xor_v2: kill the tasklets upon exit

[Sasha Levin]

From: Hanna Hawa <hannah@marvell.com>

[ Upstream commit 8bbafed8dd5cfa81071b50ead5cb60367fdef3a9 ]

The mv_xor_v2 driver uses a tasklet, initialized during the probe()
routine. However, it forgets to cleanup the tasklet using
tasklet_kill() function during the remove() routine, which this patch
fixes. This prevents the tasklet from potentially running after the
module has been removed.

Fixes: 19a340b1a820 ("dmaengine: mv_xor_v2: new driver")

Signed-off-by: Hanna Hawa <hannah@marvell.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/dma/mv_xor_v2.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/dma/mv_xor_v2.c b/drivers/dma/mv_xor_v2.c
index 71866646ffef..be1f5c26fae8 100644
--- a/drivers/dma/mv_xor_v2.c
+++ b/drivers/dma/mv_xor_v2.c
@@ -844,6 +844,8 @@ static int mv_xor_v2_remove(struct platform_device *pdev)
 
 	platform_msi_domain_free_irqs(&pdev->dev);
 
+	tasklet_kill(&xor_dev->irq_tasklet);
+
 	clk_disable_unprepare(xor_dev->clk);
 
 	return 0;
-- 
2.17.1

[PATCH AUTOSEL 4.9 41/43] drivers/base: stop new probing during shutdown

[Sasha Levin]

From: Pingfan Liu <kernelfans@gmail.com>

[ Upstream commit 3297c8fc65af5d40501ea7cddff1b195cae57e4e ]

There is a race window in device_shutdown(), which may cause
-1. parent device shut down before child or
-2. no shutdown on a new probing device.

For 1st, taking the following scenario:
         device_shutdown                        new plugin device
  list_del_init(parent_dev);
  spin_unlock(list_lock);
                                                  device_add(child)
                                                  probe child
  shutdown parent_dev
       --> now child is on the tail of devices_kset

For 2nd, taking the following scenario:
         device_shutdown                        new plugin device
                                                  device_add(dev)
  device_lock(dev);
  ...
  device_unlock(dev);
                                                  probe dev
       --> now, the new occurred dev has no opportunity to shutdown

To fix this race issue, just prevent the new probing request. With this
logic, device_shutdown() is more similar to dpm_prepare().

Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/base/core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/base/core.c b/drivers/base/core.c
index a0ed957d738f..f43caad30e1e 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -2072,6 +2072,9 @@ void device_shutdown(void)
 {
 	struct device *dev, *parent;
 
+	wait_for_device_probe();
+	device_block_probing();
+
 	spin_lock(&devices_kset->list_lock);
 	/*
 	 * Walk the devices list backward, shutting down each in turn.
-- 
2.17.1

[PATCH AUTOSEL 4.9 43/43] crypto: sharah - Unregister correct algorithms for SAHARA 3

[Sasha Levin]

From: Michael Müller <michael@fds-team.de>

[ Upstream commit 0e7d4d932ffc23f75efb31a8c2ac2396c1b81c55 ]

This patch fixes two typos related to unregistering algorithms supported by
SAHARAH 3. In sahara_register_algs the wrong algorithms are unregistered
in case of an error. In sahara_unregister_algs the wrong array is used to
determine the iteration count.

Signed-off-by: Michael Müller <michael@fds-team.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
---
 drivers/crypto/sahara.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/sahara.c b/drivers/crypto/sahara.c
index 0c49956ee0ce..4d0ec7bb3bc9 100644
--- a/drivers/crypto/sahara.c
+++ b/drivers/crypto/sahara.c
@@ -1352,7 +1352,7 @@ static int sahara_register_algs(struct sahara_dev *dev)
 
 err_sha_v3_algs:
 	for (j = 0; j < k; j++)
-		crypto_unregister_ahash(&sha_v4_algs[j]);
+		crypto_unregister_ahash(&sha_v3_algs[j]);
 
 err_aes_algs:
 	for (j = 0; j < i; j++)
@@ -1368,7 +1368,7 @@ static void sahara_unregister_algs(struct sahara_dev *dev)
 	for (i = 0; i < ARRAY_SIZE(aes_algs); i++)
 		crypto_unregister_alg(&aes_algs[i]);
 
-	for (i = 0; i < ARRAY_SIZE(sha_v4_algs); i++)
+	for (i = 0; i < ARRAY_SIZE(sha_v3_algs); i++)
 		crypto_unregister_ahash(&sha_v3_algs[i]);
 
 	if (dev->version > SAHARA_VERSION_3)
-- 
2.17.1

Re: [PATCH AUTOSEL 4.9 01/43] usb: usbtest: use irqsave() in USB's complete callback

[Greg Kroah-Hartman]

On Fri, Sep 07, 2018 at 12:38:19AM +0000, Sasha Levin wrote:
> From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> 
> [ Upstream commit 6f3fde684d0232e66ada3410f016a58e09a87689 ]
> 
> The USB completion callback does not disable interrupts while acquiring
> the lock. We want to remove the local_irq_disable() invocation from
> __usb_hcd_giveback_urb() and therefore it is required for the callback
> handler to disable the interrupts while acquiring the lock.
> The callback may be invoked either in IRQ or BH context depending on the
> USB host controller.
> Use the _irqsave() variant of the locking primitives.
> 
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Acked-by: Alan Stern <stern@rowland.harvard.edu>
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
> ---
>  drivers/usb/misc/usbtest.c | 10 ++++++----
>  1 file changed, 6 insertions(+), 4 deletions(-)

And dropped here :)