[PULL] First set of IIO fixes for the 4.19 cycle

[PULL] First set of IIO fixes for the 4.19 cycle

[Jonathan Cameron]

The following changes since commit 6d4abf1c0e265d8e99c155b91c1cf44e37793e53:

  staging: axis-fifo: fix return value check in axis_fifo_probe() (2018-07-28 09:26:31 +0200)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-4.19a

for you to fetch changes up to a13bf65f3f2e36008ea60b49d3bda2527e09fd9c:

  iio: imu: st_lsm6dsx: take into account ts samples in wm configuration (2018-09-02 21:19:53 +0100)

----------------------------------------------------------------
First set of IIO fixes for the 4.19 cycle.

* ad9523
  - sysfs write should return the number of characters used or an error, not
    0 which could result in an infinite loop in userspace.
* lsm6dsx
  - Fix computation of length when updating the watermark to include
    timestamps avoiding the watermark being set earlier than intended.
* maxim_thermocouple
  - Revert a patch adding the max31856 as it's not actually compatible with
    the register set that this driver supports.
* si1133
  - Fix an impossible value check so we don't always error out whether the
    passed in value is good or bad.

----------------------------------------------------------------
Colin Ian King (1):
      iio: light: si1133 fix test for val being not zero or not one.

Lars-Peter Clausen (1):
      iio: ad9523: Fix return value for ad952x_store()

Lorenzo Bianconi (1):
      iio: imu: st_lsm6dsx: take into account ts samples in wm configuration

Matt Ranostay (1):
      Revert "iio: temperature: maxim_thermocouple: add MAX31856 part"

 drivers/iio/frequency/ad9523.c                 |  2 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 13 ++++++-------
 drivers/iio/light/si1133.c                     |  2 +-
 drivers/iio/temperature/maxim_thermocouple.c   |  1 -
 4 files changed, 8 insertions(+), 10 deletions(-)

Re: [PULL] First set of IIO fixes for the 4.19 cycle

[Greg KH]

On Sat, Sep 08, 2018 at 04:17:00PM +0100, Jonathan Cameron wrote:
> The following changes since commit 6d4abf1c0e265d8e99c155b91c1cf44e37793e53:
> 
>   staging: axis-fifo: fix return value check in axis_fifo_probe() (2018-07-28 09:26:31 +0200)
> 
> are available in the Git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-4.19a
> 
> for you to fetch changes up to a13bf65f3f2e36008ea60b49d3bda2527e09fd9c:
> 
>   iio: imu: st_lsm6dsx: take into account ts samples in wm configuration (2018-09-02 21:19:53 +0100)
> 
> ----------------------------------------------------------------
> First set of IIO fixes for the 4.19 cycle.
> 
> * ad9523
>   - sysfs write should return the number of characters used or an error, not
>     0 which could result in an infinite loop in userspace.
> * lsm6dsx
>   - Fix computation of length when updating the watermark to include
>     timestamps avoiding the watermark being set earlier than intended.
> * maxim_thermocouple
>   - Revert a patch adding the max31856 as it's not actually compatible with
>     the register set that this driver supports.
> * si1133
>   - Fix an impossible value check so we don't always error out whether the
>     passed in value is good or bad.
> 
> ----------------------------------------------------------------
> Colin Ian King (1):
>       iio: light: si1133 fix test for val being not zero or not one.
> 
> Lars-Peter Clausen (1):
>       iio: ad9523: Fix return value for ad952x_store()
> 
> Lorenzo Bianconi (1):
>       iio: imu: st_lsm6dsx: take into account ts samples in wm configuration
> 
> Matt Ranostay (1):
>       Revert "iio: temperature: maxim_thermocouple: add MAX31856 part"
> 
>  drivers/iio/frequency/ad9523.c                 |  2 +-
>  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 13 ++++++-------
>  drivers/iio/light/si1133.c                     |  2 +-
>  drivers/iio/temperature/maxim_thermocouple.c   |  1 -
>  4 files changed, 8 insertions(+), 10 deletions(-)

Are you sure all 4 patches were there?  I only saw 2 patches in the pull
request I just merged.

thanks,

greg k-h

Re: [PULL] First set of IIO fixes for the 4.19 cycle

[Jonathan Cameron]

On Sun, 9 Sep 2018 09:35:25 +0200
Greg KH <gregkh@linuxfoundation.org> wrote:

> On Sat, Sep 08, 2018 at 04:17:00PM +0100, Jonathan Cameron wrote:
> > The following changes since commit 6d4abf1c0e265d8e99c155b91c1cf44e37793e53:
> > 
> >   staging: axis-fifo: fix return value check in axis_fifo_probe() (2018-07-28 09:26:31 +0200)
> > 
> > are available in the Git repository at:
> > 
> >   git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-fixes-4.19a
> > 
> > for you to fetch changes up to a13bf65f3f2e36008ea60b49d3bda2527e09fd9c:
> > 
> >   iio: imu: st_lsm6dsx: take into account ts samples in wm configuration (2018-09-02 21:19:53 +0100)
> > 
> > ----------------------------------------------------------------
> > First set of IIO fixes for the 4.19 cycle.
> > 
> > * ad9523
> >   - sysfs write should return the number of characters used or an error, not
> >     0 which could result in an infinite loop in userspace.
> > * lsm6dsx
> >   - Fix computation of length when updating the watermark to include
> >     timestamps avoiding the watermark being set earlier than intended.
> > * maxim_thermocouple
> >   - Revert a patch adding the max31856 as it's not actually compatible with
> >     the register set that this driver supports.
> > * si1133
> >   - Fix an impossible value check so we don't always error out whether the
> >     passed in value is good or bad.
> > 
> > ----------------------------------------------------------------
> > Colin Ian King (1):
> >       iio: light: si1133 fix test for val being not zero or not one.
> > 
> > Lars-Peter Clausen (1):
> >       iio: ad9523: Fix return value for ad952x_store()
> > 
> > Lorenzo Bianconi (1):
> >       iio: imu: st_lsm6dsx: take into account ts samples in wm configuration
> > 
> > Matt Ranostay (1):
> >       Revert "iio: temperature: maxim_thermocouple: add MAX31856 part"
> > 
> >  drivers/iio/frequency/ad9523.c                 |  2 +-
> >  drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 13 ++++++-------
> >  drivers/iio/light/si1133.c                     |  2 +-
> >  drivers/iio/temperature/maxim_thermocouple.c   |  1 -
> >  4 files changed, 8 insertions(+), 10 deletions(-)  
> 
> Are you sure all 4 patches were there?  I only saw 2 patches in the pull
> request I just merged.
Ah, sorry.  I managed to mess up some local rearranging of trees and lost
a tag somewhere.  The first two patches (si1133 and ad9523) have been in your
tree for a while. I cherry picked them across in to the last 'new stuff'
pull request and forgot to take them off my fixes branch.

Sorry about that. We ended up with the right result!

Jonathan

> 
> thanks,
> 
> greg k-h