* [PATCH v3 0/4] rk3328 and rock64 display support
@ 2018-09-10 9:28 ` Heiko Stuebner
0 siblings, 0 replies; 12+ messages in thread
From: Heiko Stuebner @ 2018-09-10 9:28 UTC (permalink / raw)
To: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Heiko Stuebner, robin.murphy-5wv7dgnIgG8,
hjc-TNX95d0MmH7DzftRWevZcw,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
zhengyang-TNX95d0MmH7DzftRWevZcw
Companion series for the display modifications adding the necessary
devicetree stuff for display support on the rk3328-rock64.
changes in v3:
- drop reg from hdmi port - unneeded with a single vop
as suggested by Robin
changes in v2:
- add defconfig addition for the phy driver
- adapt to changed reference clock names
- remove trailing 0 from vop irq
Heiko Stuebner (4):
arm64: dts: rockchip: add Innosilicon hdmi phy node to rk3328
arm64: dts: rockchip: add rk3328 display nodes
arm64: dts: rockchip: enable display nodes on rk3328-rock64
arm64: defconfig: enable Rockchip Innosilicon hdmiphy
.../arm64/boot/dts/rockchip/rk3328-rock64.dts | 16 +++++
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 67 +++++++++++++++++++
arch/arm64/configs/defconfig | 1 +
3 files changed, 84 insertions(+)
--
2.17.0
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v3 0/4] rk3328 and rock64 display support
@ 2018-09-10 9:28 ` Heiko Stuebner
0 siblings, 0 replies; 12+ messages in thread
From: Heiko Stuebner @ 2018-09-10 9:28 UTC (permalink / raw)
To: linux-arm-kernel
Companion series for the display modifications adding the necessary
devicetree stuff for display support on the rk3328-rock64.
changes in v3:
- drop reg from hdmi port - unneeded with a single vop
as suggested by Robin
changes in v2:
- add defconfig addition for the phy driver
- adapt to changed reference clock names
- remove trailing 0 from vop irq
Heiko Stuebner (4):
arm64: dts: rockchip: add Innosilicon hdmi phy node to rk3328
arm64: dts: rockchip: add rk3328 display nodes
arm64: dts: rockchip: enable display nodes on rk3328-rock64
arm64: defconfig: enable Rockchip Innosilicon hdmiphy
.../arm64/boot/dts/rockchip/rk3328-rock64.dts | 16 +++++
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 67 +++++++++++++++++++
arch/arm64/configs/defconfig | 1 +
3 files changed, 84 insertions(+)
--
2.17.0
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v3 1/4] arm64: dts: rockchip: add Innosilicon hdmi phy node to rk3328
2018-09-10 9:28 ` Heiko Stuebner
@ 2018-09-10 9:28 ` Heiko Stuebner
-1 siblings, 0 replies; 12+ messages in thread
From: Heiko Stuebner @ 2018-09-10 9:28 UTC (permalink / raw)
To: linux-rockchip
Cc: Heiko Stuebner, robin.murphy, hjc, linux-arm-kernel, zhengyang
The rk3328 uses a hdmiphy from Innosilicon, so add the necessary node
to the rk3328 soc devicetree.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 2e3bd93c508c..beebab74ce17 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -616,6 +616,20 @@
status = "disabled";
};
+ hdmiphy: phy@ff430000 {
+ compatible = "rockchip,rk3328-hdmi-phy";
+ reg = <0x0 0xff430000 0x0 0x10000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_HDMIPHY>, <&xin24m>, <&cru DCLK_HDMIPHY>;
+ clock-names = "sysclk", "refoclk", "refpclk";
+ clock-output-names = "hdmi_phy";
+ #clock-cells = <0>;
+ nvmem-cells = <&efuse_cpu_version>;
+ nvmem-cell-names = "cpu-version";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
cru: clock-controller@ff440000 {
compatible = "rockchip,rk3328-cru", "rockchip,cru", "syscon";
reg = <0x0 0xff440000 0x0 0x1000>;
--
2.17.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v3 1/4] arm64: dts: rockchip: add Innosilicon hdmi phy node to rk3328
@ 2018-09-10 9:28 ` Heiko Stuebner
0 siblings, 0 replies; 12+ messages in thread
From: Heiko Stuebner @ 2018-09-10 9:28 UTC (permalink / raw)
To: linux-arm-kernel
The rk3328 uses a hdmiphy from Innosilicon, so add the necessary node
to the rk3328 soc devicetree.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 2e3bd93c508c..beebab74ce17 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -616,6 +616,20 @@
status = "disabled";
};
+ hdmiphy: phy at ff430000 {
+ compatible = "rockchip,rk3328-hdmi-phy";
+ reg = <0x0 0xff430000 0x0 0x10000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_HDMIPHY>, <&xin24m>, <&cru DCLK_HDMIPHY>;
+ clock-names = "sysclk", "refoclk", "refpclk";
+ clock-output-names = "hdmi_phy";
+ #clock-cells = <0>;
+ nvmem-cells = <&efuse_cpu_version>;
+ nvmem-cell-names = "cpu-version";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
cru: clock-controller at ff440000 {
compatible = "rockchip,rk3328-cru", "rockchip,cru", "syscon";
reg = <0x0 0xff440000 0x0 0x1000>;
--
2.17.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v3 2/4] arm64: dts: rockchip: add rk3328 display nodes
2018-09-10 9:28 ` Heiko Stuebner
@ 2018-09-10 9:28 ` Heiko Stuebner
-1 siblings, 0 replies; 12+ messages in thread
From: Heiko Stuebner @ 2018-09-10 9:28 UTC (permalink / raw)
To: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Heiko Stuebner, robin.murphy-5wv7dgnIgG8,
hjc-TNX95d0MmH7DzftRWevZcw,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
zhengyang-TNX95d0MmH7DzftRWevZcw
Add the chain of display nodes from the core display-subsystem
through the one vop to the dw-hdmi output.
Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
Tested-by: Robin Murphy <robin.murphy-5wv7dgnIgG8@public.gmane.org>
changes in v3:
- drop reg from hdmi-in-port
changes in v2:
- remove trailing 0 from vop irq
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 53 ++++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index beebab74ce17..6b480d723fca 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -151,6 +151,11 @@
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
+ display_subsystem: display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vop_out>;
+ };
+
psci {
compatible = "arm,psci-1.0", "arm,psci-0.2";
method = "smc";
@@ -605,6 +610,28 @@
status = "disabled";
};
+ vop: vop@ff370000 {
+ compatible = "rockchip,rk3328-vop";
+ reg = <0x0 0xff370000 0x0 0x3efc>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOP>, <&cru DCLK_LCDC>, <&cru HCLK_VOP>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>;
+ reset-names = "axi", "ahb", "dclk";
+ iommus = <&vop_mmu>;
+ status = "disabled";
+
+ vop_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vop_out_hdmi: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&hdmi_in_vop>;
+ };
+ };
+ };
+
vop_mmu: iommu@ff373f00 {
compatible = "rockchip,iommu";
reg = <0x0 0xff373f00 0x0 0x100>;
@@ -616,6 +643,32 @@
status = "disabled";
};
+ hdmi: hdmi@ff3c0000 {
+ compatible = "rockchip,rk3328-dw-hdmi";
+ reg = <0x0 0xff3c0000 0x0 0x20000>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_HDMI>,
+ <&cru SCLK_HDMI_SFC>;
+ clock-names = "iahb",
+ "isfr";
+ phys = <&hdmiphy>;
+ phy-names = "hdmi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec &hdmii2c_xfer &hdmi_hpd>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ ports {
+ hdmi_in: port {
+ hdmi_in_vop: endpoint {
+ remote-endpoint = <&vop_out_hdmi>;
+ };
+ };
+ };
+ };
+
hdmiphy: phy@ff430000 {
compatible = "rockchip,rk3328-hdmi-phy";
reg = <0x0 0xff430000 0x0 0x10000>;
--
2.17.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v3 2/4] arm64: dts: rockchip: add rk3328 display nodes
@ 2018-09-10 9:28 ` Heiko Stuebner
0 siblings, 0 replies; 12+ messages in thread
From: Heiko Stuebner @ 2018-09-10 9:28 UTC (permalink / raw)
To: linux-arm-kernel
Add the chain of display nodes from the core display-subsystem
through the one vop to the dw-hdmi output.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
changes in v3:
- drop reg from hdmi-in-port
changes in v2:
- remove trailing 0 from vop irq
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 53 ++++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index beebab74ce17..6b480d723fca 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -151,6 +151,11 @@
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
+ display_subsystem: display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vop_out>;
+ };
+
psci {
compatible = "arm,psci-1.0", "arm,psci-0.2";
method = "smc";
@@ -605,6 +610,28 @@
status = "disabled";
};
+ vop: vop at ff370000 {
+ compatible = "rockchip,rk3328-vop";
+ reg = <0x0 0xff370000 0x0 0x3efc>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOP>, <&cru DCLK_LCDC>, <&cru HCLK_VOP>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>;
+ reset-names = "axi", "ahb", "dclk";
+ iommus = <&vop_mmu>;
+ status = "disabled";
+
+ vop_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vop_out_hdmi: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&hdmi_in_vop>;
+ };
+ };
+ };
+
vop_mmu: iommu at ff373f00 {
compatible = "rockchip,iommu";
reg = <0x0 0xff373f00 0x0 0x100>;
@@ -616,6 +643,32 @@
status = "disabled";
};
+ hdmi: hdmi at ff3c0000 {
+ compatible = "rockchip,rk3328-dw-hdmi";
+ reg = <0x0 0xff3c0000 0x0 0x20000>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_HDMI>,
+ <&cru SCLK_HDMI_SFC>;
+ clock-names = "iahb",
+ "isfr";
+ phys = <&hdmiphy>;
+ phy-names = "hdmi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec &hdmii2c_xfer &hdmi_hpd>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ ports {
+ hdmi_in: port {
+ hdmi_in_vop: endpoint {
+ remote-endpoint = <&vop_out_hdmi>;
+ };
+ };
+ };
+ };
+
hdmiphy: phy at ff430000 {
compatible = "rockchip,rk3328-hdmi-phy";
reg = <0x0 0xff430000 0x0 0x10000>;
--
2.17.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v3 3/4] arm64: dts: rockchip: enable display nodes on rk3328-rock64
2018-09-10 9:28 ` Heiko Stuebner
@ 2018-09-10 9:28 ` Heiko Stuebner
-1 siblings, 0 replies; 12+ messages in thread
From: Heiko Stuebner @ 2018-09-10 9:28 UTC (permalink / raw)
To: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Heiko Stuebner, robin.murphy-5wv7dgnIgG8,
hjc-TNX95d0MmH7DzftRWevZcw,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
zhengyang-TNX95d0MmH7DzftRWevZcw
Enable necessary nodes to get output on the hdmi port of the board.
Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
---
arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index ad82bf39e268..4870c089b6c9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -108,6 +108,14 @@
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmiphy {
+ status = "okay";
+};
+
&i2c1 {
status = "okay";
@@ -304,3 +312,11 @@
dr_mode = "host";
status = "okay";
};
+
+&vop {
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
--
2.17.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v3 3/4] arm64: dts: rockchip: enable display nodes on rk3328-rock64
@ 2018-09-10 9:28 ` Heiko Stuebner
0 siblings, 0 replies; 12+ messages in thread
From: Heiko Stuebner @ 2018-09-10 9:28 UTC (permalink / raw)
To: linux-arm-kernel
Enable necessary nodes to get output on the hdmi port of the board.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index ad82bf39e268..4870c089b6c9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -108,6 +108,14 @@
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmiphy {
+ status = "okay";
+};
+
&i2c1 {
status = "okay";
@@ -304,3 +312,11 @@
dr_mode = "host";
status = "okay";
};
+
+&vop {
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
--
2.17.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v3 4/4] arm64: defconfig: enable Rockchip Innosilicon hdmiphy
2018-09-10 9:28 ` Heiko Stuebner
@ 2018-09-10 9:28 ` Heiko Stuebner
-1 siblings, 0 replies; 12+ messages in thread
From: Heiko Stuebner @ 2018-09-10 9:28 UTC (permalink / raw)
To: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
Cc: Heiko Stuebner, robin.murphy-5wv7dgnIgG8,
hjc-TNX95d0MmH7DzftRWevZcw,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
zhengyang-TNX95d0MmH7DzftRWevZcw
The rk3228 and rk3328 socs use an MMIO-connected hdmi-phy from Innosilicon.
So enable the necessary driver as module.
Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
---
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index db8d364f8476..36ef2dcfa085 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -638,6 +638,7 @@ CONFIG_PHY_QCOM_USB_HS=y
CONFIG_PHY_RCAR_GEN3_USB2=y
CONFIG_PHY_RCAR_GEN3_USB3=m
CONFIG_PHY_ROCKCHIP_EMMC=y
+CONFIG_PHY_ROCKCHIP_INNO_HDMI=m
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_PCIE=m
CONFIG_PHY_ROCKCHIP_TYPEC=y
--
2.17.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v3 4/4] arm64: defconfig: enable Rockchip Innosilicon hdmiphy
@ 2018-09-10 9:28 ` Heiko Stuebner
0 siblings, 0 replies; 12+ messages in thread
From: Heiko Stuebner @ 2018-09-10 9:28 UTC (permalink / raw)
To: linux-arm-kernel
The rk3228 and rk3328 socs use an MMIO-connected hdmi-phy from Innosilicon.
So enable the necessary driver as module.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index db8d364f8476..36ef2dcfa085 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -638,6 +638,7 @@ CONFIG_PHY_QCOM_USB_HS=y
CONFIG_PHY_RCAR_GEN3_USB2=y
CONFIG_PHY_RCAR_GEN3_USB3=m
CONFIG_PHY_ROCKCHIP_EMMC=y
+CONFIG_PHY_ROCKCHIP_INNO_HDMI=m
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_PCIE=m
CONFIG_PHY_ROCKCHIP_TYPEC=y
--
2.17.0
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [PATCH v3 0/4] rk3328 and rock64 display support
2018-09-10 9:28 ` Heiko Stuebner
@ 2018-09-28 14:06 ` Heiko Stuebner
-1 siblings, 0 replies; 12+ messages in thread
From: Heiko Stuebner @ 2018-09-28 14:06 UTC (permalink / raw)
To: linux-rockchip; +Cc: robin.murphy, hjc, linux-arm-kernel, zhengyang
Am Montag, 10. September 2018, 11:28:39 CEST schrieb Heiko Stuebner:
> Companion series for the display modifications adding the necessary
> devicetree stuff for display support on the rk3328-rock64.
>
> changes in v3:
> - drop reg from hdmi port - unneeded with a single vop
> as suggested by Robin
>
> changes in v2:
> - add defconfig addition for the phy driver
> - adapt to changed reference clock names
> - remove trailing 0 from vop irq
>
> Heiko Stuebner (4):
> arm64: dts: rockchip: add Innosilicon hdmi phy node to rk3328
> arm64: dts: rockchip: add rk3328 display nodes
> arm64: dts: rockchip: enable display nodes on rk3328-rock64
> arm64: defconfig: enable Rockchip Innosilicon hdmiphy
with phy and hdmi support being scheduled for 4.20,
applied these as well.
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v3 0/4] rk3328 and rock64 display support
@ 2018-09-28 14:06 ` Heiko Stuebner
0 siblings, 0 replies; 12+ messages in thread
From: Heiko Stuebner @ 2018-09-28 14:06 UTC (permalink / raw)
To: linux-arm-kernel
Am Montag, 10. September 2018, 11:28:39 CEST schrieb Heiko Stuebner:
> Companion series for the display modifications adding the necessary
> devicetree stuff for display support on the rk3328-rock64.
>
> changes in v3:
> - drop reg from hdmi port - unneeded with a single vop
> as suggested by Robin
>
> changes in v2:
> - add defconfig addition for the phy driver
> - adapt to changed reference clock names
> - remove trailing 0 from vop irq
>
> Heiko Stuebner (4):
> arm64: dts: rockchip: add Innosilicon hdmi phy node to rk3328
> arm64: dts: rockchip: add rk3328 display nodes
> arm64: dts: rockchip: enable display nodes on rk3328-rock64
> arm64: defconfig: enable Rockchip Innosilicon hdmiphy
with phy and hdmi support being scheduled for 4.20,
applied these as well.
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2018-09-28 14:06 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-09-10 9:28 [PATCH v3 0/4] rk3328 and rock64 display support Heiko Stuebner
2018-09-10 9:28 ` Heiko Stuebner
2018-09-10 9:28 ` [PATCH v3 1/4] arm64: dts: rockchip: add Innosilicon hdmi phy node to rk3328 Heiko Stuebner
2018-09-10 9:28 ` Heiko Stuebner
[not found] ` <20180910092843.1700-1-heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
2018-09-10 9:28 ` [PATCH v3 2/4] arm64: dts: rockchip: add rk3328 display nodes Heiko Stuebner
2018-09-10 9:28 ` Heiko Stuebner
2018-09-10 9:28 ` [PATCH v3 3/4] arm64: dts: rockchip: enable display nodes on rk3328-rock64 Heiko Stuebner
2018-09-10 9:28 ` Heiko Stuebner
2018-09-10 9:28 ` [PATCH v3 4/4] arm64: defconfig: enable Rockchip Innosilicon hdmiphy Heiko Stuebner
2018-09-10 9:28 ` Heiko Stuebner
2018-09-28 14:06 ` [PATCH v3 0/4] rk3328 and rock64 display support Heiko Stuebner
2018-09-28 14:06 ` Heiko Stuebner
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.