[PATCH 4.4 0/6] irqchip fixes for stable 4.4

[PATCH 4.4 0/6] irqchip fixes for stable 4.4

[Hanjun Guo]

From: Hanjun Guo <hanjun.guo@linaro.org>

Hi Greg,

When I was migrating the kernel from 4.1 to 4.4, I found some irqchip (and one
genirq) bugfix patches are missing in 4.4, please take a look and consider 
apply them.

Thanks
Hanjun

Marc Zyngier (3):
  irqchip/gic-v3-its: Recompute the number of pages on page size change
  irqchip/gic-v3: Add missing barrier to 32bit version of
    gic_read_iar()
  irqchip/gic: Make interrupt ID 1020 invalid

Shanker Donthineni (2):
  irqchip/gicv3-its: Fix memory leak in its_free_tables()
  irqchip/gicv3-its: Avoid cache flush beyond ITS_BASERn memory size

Sudeep Holla (1):
  genirq: Delay incrementing interrupt count if it's disabled/pending

 arch/arm/include/asm/arch_gicv3.h |  1 +
 drivers/irqchip/irq-gic-v3-its.c  | 34 ++++++++++++++++++++++------------
 drivers/irqchip/irq-gic.c         |  2 +-
 kernel/irq/chip.c                 |  8 ++++----
 4 files changed, 28 insertions(+), 17 deletions(-)

-- 
1.7.12.4

[PATCH 4.4 1/6] genirq: Delay incrementing interrupt count if it's disabled/pending

[Hanjun Guo]

From: Sudeep Holla <sudeep.holla@arm.com>

commit a946e8c717f9355d1abd5408ed0adc0002d1aed1 upstream.

In case of a wakeup interrupt, irq_pm_check_wakeup disables the interrupt
and marks it pending and suspended, disables it and notifies the pm core
about the wake event. The interrupt gets handled later once the system
is resumed.

However the irq stats is updated twice: once when it's disabled waiting
for the system to resume and later when it's handled, resulting in wrong
counting of the wakeup interrupt when waking up the system.

This patch updates the interrupt count so that it's updated only when
the interrupt gets handled. It's already handled correctly in
handle_edge_irq and handle_edge_eoi_irq.

Reported-by: Manoil Claudiu <claudiu.manoil@freescale.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/1446661957-1019-1-git-send-email-sudeep.holla@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 kernel/irq/chip.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index e4453d9..3c74e13 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -338,7 +338,6 @@ void handle_nested_irq(unsigned int irq)
 	raw_spin_lock_irq(&desc->lock);
 
 	desc->istate &= ~(IRQS_REPLAY | IRQS_WAITING);
-	kstat_incr_irqs_this_cpu(desc);
 
 	action = desc->action;
 	if (unlikely(!action || irqd_irq_disabled(&desc->irq_data))) {
@@ -346,6 +345,7 @@ void handle_nested_irq(unsigned int irq)
 		goto out_unlock;
 	}
 
+	kstat_incr_irqs_this_cpu(desc);
 	irqd_set(&desc->irq_data, IRQD_IRQ_INPROGRESS);
 	raw_spin_unlock_irq(&desc->lock);
 
@@ -412,13 +412,13 @@ void handle_simple_irq(struct irq_desc *desc)
 		goto out_unlock;
 
 	desc->istate &= ~(IRQS_REPLAY | IRQS_WAITING);
-	kstat_incr_irqs_this_cpu(desc);
 
 	if (unlikely(!desc->action || irqd_irq_disabled(&desc->irq_data))) {
 		desc->istate |= IRQS_PENDING;
 		goto out_unlock;
 	}
 
+	kstat_incr_irqs_this_cpu(desc);
 	handle_irq_event(desc);
 
 out_unlock:
@@ -462,7 +462,6 @@ void handle_level_irq(struct irq_desc *desc)
 		goto out_unlock;
 
 	desc->istate &= ~(IRQS_REPLAY | IRQS_WAITING);
-	kstat_incr_irqs_this_cpu(desc);
 
 	/*
 	 * If its disabled or no action available
@@ -473,6 +472,7 @@ void handle_level_irq(struct irq_desc *desc)
 		goto out_unlock;
 	}
 
+	kstat_incr_irqs_this_cpu(desc);
 	handle_irq_event(desc);
 
 	cond_unmask_irq(desc);
@@ -532,7 +532,6 @@ void handle_fasteoi_irq(struct irq_desc *desc)
 		goto out;
 
 	desc->istate &= ~(IRQS_REPLAY | IRQS_WAITING);
-	kstat_incr_irqs_this_cpu(desc);
 
 	/*
 	 * If its disabled or no action available
@@ -544,6 +543,7 @@ void handle_fasteoi_irq(struct irq_desc *desc)
 		goto out;
 	}
 
+	kstat_incr_irqs_this_cpu(desc);
 	if (desc->istate & IRQS_ONESHOT)
 		mask_irq(desc);
 
-- 
1.7.12.4

[PATCH 4.4 2/6] irqchip/gic-v3-its: Recompute the number of pages on page size change

From: Marc Zyngier <marc.zyngier@arm.com>

commit 18aa60ce2751c95d3412ed06a58b8b6cfb6f88f2 upstream.

When the programming of a GITS_BASERn register fails because of
an unsupported ITS page size, we retry it with a smaller page size.
Unfortunately, we don't recompute the number of allocated ITS pages,
indicating the wrong value computed in the original allocation.

A convenient fix is to free the pages we allocated, update the
page size, and restart the allocation. This will ensure that
we always allocate the right amount in the case of a device
table, specially if we have to reduce the allocation order
to stay within the boundaries of the ITS maximum allocation.

Reported-and-tested-by: Ma Jun <majun258@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1453818255-1289-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 drivers/irqchip/irq-gic-v3-its.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 82e00e3..af61a2f 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -884,6 +884,7 @@ static int its_alloc_tables(const char *node_name, struct its_node *its)
 		}
 
 		alloc_size = (1 << order) * PAGE_SIZE;
+retry_alloc_baser:
 		alloc_pages = (alloc_size / psz);
 		if (alloc_pages > GITS_BASER_PAGES_MAX) {
 			alloc_pages = GITS_BASER_PAGES_MAX;
@@ -947,13 +948,16 @@ retry_baser:
 			 * size and retry. If we reach 4K, then
 			 * something is horribly wrong...
 			 */
+			free_pages((unsigned long)base, order);
+			its->tables[i] = NULL;
+
 			switch (psz) {
 			case SZ_16K:
 				psz = SZ_4K;
-				goto retry_baser;
+				goto retry_alloc_baser;
 			case SZ_64K:
 				psz = SZ_16K;
-				goto retry_baser;
+				goto retry_alloc_baser;
 			}
 		}
 
-- 
1.7.12.4

[PATCH 4.4 2/6] irqchip/gic-v3-its: Recompute the number of pages on page size change

[Hanjun Guo]

From: Marc Zyngier <marc.zyngier@arm.com>

commit 18aa60ce2751c95d3412ed06a58b8b6cfb6f88f2 upstream.

When the programming of a GITS_BASERn register fails because of
an unsupported ITS page size, we retry it with a smaller page size.
Unfortunately, we don't recompute the number of allocated ITS pages,
indicating the wrong value computed in the original allocation.

A convenient fix is to free the pages we allocated, update the
page size, and restart the allocation. This will ensure that
we always allocate the right amount in the case of a device
table, specially if we have to reduce the allocation order
to stay within the boundaries of the ITS maximum allocation.

Reported-and-tested-by: Ma Jun <majun258@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-arm-kernel at lists.infradead.org
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1453818255-1289-1-git-send-email-marc.zyngier at arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 drivers/irqchip/irq-gic-v3-its.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index 82e00e3..af61a2f 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -884,6 +884,7 @@ static int its_alloc_tables(const char *node_name, struct its_node *its)
 		}
 
 		alloc_size = (1 << order) * PAGE_SIZE;
+retry_alloc_baser:
 		alloc_pages = (alloc_size / psz);
 		if (alloc_pages > GITS_BASER_PAGES_MAX) {
 			alloc_pages = GITS_BASER_PAGES_MAX;
@@ -947,13 +948,16 @@ retry_baser:
 			 * size and retry. If we reach 4K, then
 			 * something is horribly wrong...
 			 */
+			free_pages((unsigned long)base, order);
+			its->tables[i] = NULL;
+
 			switch (psz) {
 			case SZ_16K:
 				psz = SZ_4K;
-				goto retry_baser;
+				goto retry_alloc_baser;
 			case SZ_64K:
 				psz = SZ_16K;
-				goto retry_baser;
+				goto retry_alloc_baser;
 			}
 		}
 
-- 
1.7.12.4

[PATCH 4.4 3/6] irqchip/gicv3-its: Fix memory leak in its_free_tables()

[Hanjun Guo]

From: Shanker Donthineni <shankerd@codeaurora.org>

commit 1a485f4d2e28efd77075b2952926683d6c245633 upstream.

The current ITS driver has a memory leak in its_free_tables(). It
happens on tear down path of the driver when its_probe() call fails.
its_free_tables() should free the exact number of pages that have
been allocated, not just a single page as current code does.

This patch records the memory size for each ITS_BASERn at the time of
page allocation and uses the same size information when freeing pages
to fix the issue.

Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Vikram Sethi <vikrams@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1454379584-21772-1-git-send-email-shankerd@codeaurora.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 drivers/irqchip/irq-gic-v3-its.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index af61a2f..f0cbb76 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -67,7 +67,10 @@ struct its_node {
 	unsigned long		phys_base;
 	struct its_cmd_block	*cmd_base;
 	struct its_cmd_block	*cmd_write;
-	void			*tables[GITS_BASER_NR_REGS];
+	struct {
+		void		*base;
+		u32		order;
+	} tables[GITS_BASER_NR_REGS];
 	struct its_collection	*collections;
 	struct list_head	its_device_list;
 	u64			flags;
@@ -816,9 +819,10 @@ static void its_free_tables(struct its_node *its)
 	int i;
 
 	for (i = 0; i < GITS_BASER_NR_REGS; i++) {
-		if (its->tables[i]) {
-			free_page((unsigned long)its->tables[i]);
-			its->tables[i] = NULL;
+		if (its->tables[i].base) {
+			free_pages((unsigned long)its->tables[i].base,
+				   its->tables[i].order);
+			its->tables[i].base = NULL;
 		}
 	}
 }
@@ -899,7 +903,8 @@ retry_alloc_baser:
 			goto out_free;
 		}
 
-		its->tables[i] = base;
+		its->tables[i].base = base;
+		its->tables[i].order = order;
 
 retry_baser:
 		val = (virt_to_phys(base) 				 |
@@ -949,7 +954,7 @@ retry_baser:
 			 * something is horribly wrong...
 			 */
 			free_pages((unsigned long)base, order);
-			its->tables[i] = NULL;
+			its->tables[i].base = NULL;
 
 			switch (psz) {
 			case SZ_16K:
-- 
1.7.12.4

[PATCH 4.4 3/6] irqchip/gicv3-its: Fix memory leak in its_free_tables()

[Hanjun Guo]

From: Shanker Donthineni <shankerd@codeaurora.org>

commit 1a485f4d2e28efd77075b2952926683d6c245633 upstream.

The current ITS driver has a memory leak in its_free_tables(). It
happens on tear down path of the driver when its_probe() call fails.
its_free_tables() should free the exact number of pages that have
been allocated, not just a single page as current code does.

This patch records the memory size for each ITS_BASERn at the time of
page allocation and uses the same size information when freeing pages
to fix the issue.

Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Vikram Sethi <vikrams@codeaurora.org>
Cc: linux-arm-kernel at lists.infradead.org
Link: http://lkml.kernel.org/r/1454379584-21772-1-git-send-email-shankerd at codeaurora.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 drivers/irqchip/irq-gic-v3-its.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index af61a2f..f0cbb76 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -67,7 +67,10 @@ struct its_node {
 	unsigned long		phys_base;
 	struct its_cmd_block	*cmd_base;
 	struct its_cmd_block	*cmd_write;
-	void			*tables[GITS_BASER_NR_REGS];
+	struct {
+		void		*base;
+		u32		order;
+	} tables[GITS_BASER_NR_REGS];
 	struct its_collection	*collections;
 	struct list_head	its_device_list;
 	u64			flags;
@@ -816,9 +819,10 @@ static void its_free_tables(struct its_node *its)
 	int i;
 
 	for (i = 0; i < GITS_BASER_NR_REGS; i++) {
-		if (its->tables[i]) {
-			free_page((unsigned long)its->tables[i]);
-			its->tables[i] = NULL;
+		if (its->tables[i].base) {
+			free_pages((unsigned long)its->tables[i].base,
+				   its->tables[i].order);
+			its->tables[i].base = NULL;
 		}
 	}
 }
@@ -899,7 +903,8 @@ retry_alloc_baser:
 			goto out_free;
 		}
 
-		its->tables[i] = base;
+		its->tables[i].base = base;
+		its->tables[i].order = order;
 
 retry_baser:
 		val = (virt_to_phys(base) 				 |
@@ -949,7 +954,7 @@ retry_baser:
 			 * something is horribly wrong...
 			 */
 			free_pages((unsigned long)base, order);
-			its->tables[i] = NULL;
+			its->tables[i].base = NULL;
 
 			switch (psz) {
 			case SZ_16K:
-- 
1.7.12.4

[PATCH 4.4 4/6] irqchip/gicv3-its: Avoid cache flush beyond ITS_BASERn memory size

[Hanjun Guo]

From: Shanker Donthineni <shankerd@codeaurora.org>

commit 2eca0d6ceea1f108b2d3ac81fb34698c4fd41006 upstream.

Function its_alloc_tables() maintains two local variables, "order" and
and "alloc_size", to hold memory size that has been allocated to
ITS_BASEn. We don't always refresh the variable alloc_size whenever
value of the variable order changes, causing the following two
problems.

  - Cache flush operation with size more than required.
  - Information reported by pr_info is not correct.

Use a helper macro that converts page order to size in bytes instead of
variable "alloc_size" to fix both the problems.

Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 drivers/irqchip/irq-gic-v3-its.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index f0cbb76..c3d7a14 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -80,6 +80,9 @@ struct its_node {
 
 #define ITS_ITT_ALIGN		SZ_256
 
+/* Convert page order to size in bytes */
+#define PAGE_ORDER_TO_SIZE(o)	(PAGE_SIZE << (o))
+
 struct event_lpi_map {
 	unsigned long		*lpi_map;
 	u16			*col_map;
@@ -855,7 +858,6 @@ static int its_alloc_tables(const char *node_name, struct its_node *its)
 		u64 type = GITS_BASER_TYPE(val);
 		u64 entry_size = GITS_BASER_ENTRY_SIZE(val);
 		int order = get_order(psz);
-		int alloc_size;
 		int alloc_pages;
 		u64 tmp;
 		void *base;
@@ -887,9 +889,8 @@ static int its_alloc_tables(const char *node_name, struct its_node *its)
 			}
 		}
 
-		alloc_size = (1 << order) * PAGE_SIZE;
 retry_alloc_baser:
-		alloc_pages = (alloc_size / psz);
+		alloc_pages = (PAGE_ORDER_TO_SIZE(order) / psz);
 		if (alloc_pages > GITS_BASER_PAGES_MAX) {
 			alloc_pages = GITS_BASER_PAGES_MAX;
 			order = get_order(GITS_BASER_PAGES_MAX * psz);
@@ -942,7 +943,7 @@ retry_baser:
 			shr = tmp & GITS_BASER_SHAREABILITY_MASK;
 			if (!shr) {
 				cache = GITS_BASER_nC;
-				__flush_dcache_area(base, alloc_size);
+				__flush_dcache_area(base, PAGE_ORDER_TO_SIZE(order));
 			}
 			goto retry_baser;
 		}
@@ -975,7 +976,7 @@ retry_baser:
 		}
 
 		pr_info("ITS: allocated %d %s @%lx (psz %dK, shr %d)\n",
-			(int)(alloc_size / entry_size),
+			(int)(PAGE_ORDER_TO_SIZE(order) / entry_size),
 			its_base_type_string[type],
 			(unsigned long)virt_to_phys(base),
 			psz / SZ_1K, (int)shr >> GITS_BASER_SHAREABILITY_SHIFT);
-- 
1.7.12.4

[PATCH 4.4 5/6] irqchip/gic-v3: Add missing barrier to 32bit version of gic_read_iar()

[Hanjun Guo]

From: Marc Zyngier <marc.zyngier@arm.com>

commit 8f318526a292c5e7cebb82f3f766b83c22343293 upstream.

Commit 1a1ebd5 ("irqchip/gic-v3: Make sure read from ICC_IAR1_EL1 is
visible on redestributor") fixed the missing barrier on arm64, but
forgot to update the 32bit counterpart, which has the same requirements.
Let's fix it.

Fixes: 1a1ebd5 ("irqchip/gic-v3: Make sure read from ICC_IAR1_EL1 is visible on redestributor")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 arch/arm/include/asm/arch_gicv3.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h
index 7da5503..e08d151 100644
--- a/arch/arm/include/asm/arch_gicv3.h
+++ b/arch/arm/include/asm/arch_gicv3.h
@@ -117,6 +117,7 @@ static inline u32 gic_read_iar(void)
 	u32 irqstat;
 
 	asm volatile("mrc " __stringify(ICC_IAR1) : "=r" (irqstat));
+	dsb(sy);
 	return irqstat;
 }
 
-- 
1.7.12.4

[PATCH 4.4 6/6] irqchip/gic: Make interrupt ID 1020 invalid

[Hanjun Guo]

From: Marc Zyngier <marc.zyngier@arm.com>

commit 327ebe1f3a9b7e20e298b39d0cff627169a28012 upstream.

The GIC has no such thing as interrupt 1020: the last valid ID is
1019, and the range 1020-1023 is reserved - 1023 indicating that
no interrupt is pending. So let's make sure we don't try to handle
this ID.

This bug has been in since the initial GIC code was introduced in
8ad68bbf7a06 ("[ARM] Add support for ARM RealView board").

Reported-by: Eric Auger <eric.auger@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
 drivers/irqchip/irq-gic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index cebd8ef..5fe968a 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -336,7 +336,7 @@ static void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
 		irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK);
 		irqnr = irqstat & GICC_IAR_INT_ID_MASK;
 
-		if (likely(irqnr > 15 && irqnr < 1021)) {
+		if (likely(irqnr > 15 && irqnr < 1020)) {
 			if (static_key_true(&supports_deactivate))
 				writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI);
 			handle_domain_irq(gic->domain, irqnr, regs);
-- 
1.7.12.4

Re: [PATCH 4.4 0/6] irqchip fixes for stable 4.4

[Hanjun Guo]

Hi Greg,

On 2018/8/19 14:27, Hanjun Guo wrote:
> From: Hanjun Guo <hanjun.guo@linaro.org>
> 
> Hi Greg,
> 
> When I was migrating the kernel from 4.1 to 4.4, I found some irqchip (and one
> genirq) bugfix patches are missing in 4.4, please take a look and consider 
> apply them.

Kindly ping for this patch set, this patch set has been tested on ARM64/ARM32
platforms with GICv3 and GICv2 (works fine). And this patch set was CCed to
maintainers and got no objections.

This patch set still can apply cleanly on top of 4.4.155, please let me
know if anything else I need to do.

Thanks
Hanjun

Re: [PATCH 4.4 0/6] irqchip fixes for stable 4.4

[Greg KH]

On Thu, Sep 13, 2018 at 11:11:33AM +0800, Hanjun Guo wrote:
> Hi Greg,
> 
> On 2018/8/19 14:27, Hanjun Guo wrote:
> > From: Hanjun Guo <hanjun.guo@linaro.org>
> > 
> > Hi Greg,
> > 
> > When I was migrating the kernel from 4.1 to 4.4, I found some irqchip (and one
> > genirq) bugfix patches are missing in 4.4, please take a look and consider 
> > apply them.
> 
> Kindly ping for this patch set, this patch set has been tested on ARM64/ARM32
> platforms with GICv3 and GICv2 (works fine). And this patch set was CCed to
> maintainers and got no objections.
> 
> This patch set still can apply cleanly on top of 4.4.155, please let me
> know if anything else I need to do.

It's just in my queue, sorry.  It's long and now that 4.4 is getting
older, the priority of mine is for newer kernels first, and older ones
second.  I'll get to these soon...

thanks,

greg k-h

Re: [PATCH 4.4 0/6] irqchip fixes for stable 4.4

[Hanjun Guo]

On 2018/9/13 15:00, Greg KH wrote:
> On Thu, Sep 13, 2018 at 11:11:33AM +0800, Hanjun Guo wrote:
>> Hi Greg,
>>
>> On 2018/8/19 14:27, Hanjun Guo wrote:
>>> From: Hanjun Guo <hanjun.guo@linaro.org>
>>>
>>> Hi Greg,
>>>
>>> When I was migrating the kernel from 4.1 to 4.4, I found some irqchip (and one
>>> genirq) bugfix patches are missing in 4.4, please take a look and consider 
>>> apply them.
>>
>> Kindly ping for this patch set, this patch set has been tested on ARM64/ARM32
>> platforms with GICv3 and GICv2 (works fine). And this patch set was CCed to
>> maintainers and got no objections.
>>
>> This patch set still can apply cleanly on top of 4.4.155, please let me
>> know if anything else I need to do.
> 
> It's just in my queue, sorry.  It's long and now that 4.4 is getting
> older, the priority of mine is for newer kernels first, and older ones
> second.  I'll get to these soon...

Thank you very much for taking care of this.

Best regards,
Hanjun

Re: [PATCH 4.4 0/6] irqchip fixes for stable 4.4

[Greg KH]

On Sun, Aug 19, 2018 at 02:27:35PM +0800, Hanjun Guo wrote:
> From: Hanjun Guo <hanjun.guo@linaro.org>
> 
> Hi Greg,
> 
> When I was migrating the kernel from 4.1 to 4.4, I found some irqchip (and one
> genirq) bugfix patches are missing in 4.4, please take a look and consider 
> apply them.

All now queued up, thanks.

greg k-h