* [PATCH 0/4] cec/v4l2: move v4l2-specific functions from cec to v4l2
@ 2018-09-13 12:49 Hans Verkuil
2018-09-13 12:49 ` [PATCH 1/4] cec: make cec_get_edid_spa_location() an inline function Hans Verkuil
` (3 more replies)
0 siblings, 4 replies; 5+ messages in thread
From: Hans Verkuil @ 2018-09-13 12:49 UTC (permalink / raw)
To: linux-media; +Cc: Lars-Peter Clausen
From: Hans Verkuil <hans.verkuil@cisco.com>
Several cec functions that deal with parsing EDIDs and handling physical
addresses where stubbed out if CEC_CORE was not configured. The problem
with that is that those functions are needed, regardless of CEC, by
receivers to validate the EDID.
This patch series moves those functions out of the cec subsystem into
the media subsystem: this only affects HDMI receivers, so the media
subsystem is a much better place.
This problem was reported by Lars-Peter Clausen.
Regards,
Hans
Hans Verkuil (4):
cec: make cec_get_edid_spa_location() an inline function
cec: integrate cec_validate_phys_addr() in cec-api.c
cec/v4l2: move V4L2 specific CEC functions to V4L2
cec: remove cec-edid.c
drivers/media/cec/Makefile | 2 +-
drivers/media/cec/cec-adap.c | 13 ++
drivers/media/cec/cec-api.c | 19 ++-
drivers/media/cec/cec-edid.c | 155 ------------------
drivers/media/i2c/adv7604.c | 4 +-
drivers/media/i2c/adv7842.c | 4 +-
drivers/media/i2c/tc358743.c | 2 +-
drivers/media/platform/vivid/vivid-vid-cap.c | 4 +-
.../media/platform/vivid/vivid-vid-common.c | 2 +-
drivers/media/v4l2-core/v4l2-dv-timings.c | 151 +++++++++++++++++
include/media/cec.h | 150 ++++++++---------
include/media/v4l2-dv-timings.h | 6 +
12 files changed, 267 insertions(+), 245 deletions(-)
delete mode 100644 drivers/media/cec/cec-edid.c
--
2.18.0
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/4] cec: make cec_get_edid_spa_location() an inline function
2018-09-13 12:49 [PATCH 0/4] cec/v4l2: move v4l2-specific functions from cec to v4l2 Hans Verkuil
@ 2018-09-13 12:49 ` Hans Verkuil
2018-09-13 12:49 ` [PATCH 2/4] cec: integrate cec_validate_phys_addr() in cec-api.c Hans Verkuil
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Hans Verkuil @ 2018-09-13 12:49 UTC (permalink / raw)
To: linux-media; +Cc: Lars-Peter Clausen, Hans Verkuil
From: Hans Verkuil <hans.verkuil@cisco.com>
This function is needed by both V4L2 and CEC, so move this to
cec.h as a static inline since there are no obvious shared
modules between the two subsystems.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
drivers/media/cec/cec-edid.c | 60 -------------------------------
include/media/cec.h | 70 ++++++++++++++++++++++++++++++++++++
2 files changed, 70 insertions(+), 60 deletions(-)
diff --git a/drivers/media/cec/cec-edid.c b/drivers/media/cec/cec-edid.c
index ec72ac1c0b91..f587e8eaefd8 100644
--- a/drivers/media/cec/cec-edid.c
+++ b/drivers/media/cec/cec-edid.c
@@ -10,66 +10,6 @@
#include <linux/types.h>
#include <media/cec.h>
-/*
- * This EDID is expected to be a CEA-861 compliant, which means that there are
- * at least two blocks and one or more of the extensions blocks are CEA-861
- * blocks.
- *
- * The returned location is guaranteed to be < size - 1.
- */
-static unsigned int cec_get_edid_spa_location(const u8 *edid, unsigned int size)
-{
- unsigned int blocks = size / 128;
- unsigned int block;
- u8 d;
-
- /* Sanity check: at least 2 blocks and a multiple of the block size */
- if (blocks < 2 || size % 128)
- return 0;
-
- /*
- * If there are fewer extension blocks than the size, then update
- * 'blocks'. It is allowed to have more extension blocks than the size,
- * since some hardware can only read e.g. 256 bytes of the EDID, even
- * though more blocks are present. The first CEA-861 extension block
- * should normally be in block 1 anyway.
- */
- if (edid[0x7e] + 1 < blocks)
- blocks = edid[0x7e] + 1;
-
- for (block = 1; block < blocks; block++) {
- unsigned int offset = block * 128;
-
- /* Skip any non-CEA-861 extension blocks */
- if (edid[offset] != 0x02 || edid[offset + 1] != 0x03)
- continue;
-
- /* search Vendor Specific Data Block (tag 3) */
- d = edid[offset + 2] & 0x7f;
- /* Check if there are Data Blocks */
- if (d <= 4)
- continue;
- if (d > 4) {
- unsigned int i = offset + 4;
- unsigned int end = offset + d;
-
- /* Note: 'end' is always < 'size' */
- do {
- u8 tag = edid[i] >> 5;
- u8 len = edid[i] & 0x1f;
-
- if (tag == 3 && len >= 5 && i + len <= end &&
- edid[i + 1] == 0x03 &&
- edid[i + 2] == 0x0c &&
- edid[i + 3] == 0x00)
- return i + 4;
- i += len + 1;
- } while (i < end);
- }
- }
- return 0;
-}
-
u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size,
unsigned int *offset)
{
diff --git a/include/media/cec.h b/include/media/cec.h
index ff9847f7f99d..603f2fa08f62 100644
--- a/include/media/cec.h
+++ b/include/media/cec.h
@@ -461,4 +461,74 @@ static inline void cec_phys_addr_invalidate(struct cec_adapter *adap)
cec_s_phys_addr(adap, CEC_PHYS_ADDR_INVALID, false);
}
+/**
+ * cec_get_edid_spa_location() - find location of the Source Physical Address
+ *
+ * @edid: the EDID
+ * @size: the size of the EDID
+ *
+ * This EDID is expected to be a CEA-861 compliant, which means that there are
+ * at least two blocks and one or more of the extensions blocks are CEA-861
+ * blocks.
+ *
+ * The returned location is guaranteed to be <= size-2.
+ *
+ * This is an inline function since it is used by both CEC and V4L2.
+ * Ideally this would go in a module shared by both, but it is overkill to do
+ * that for just a single function.
+ */
+static inline unsigned int cec_get_edid_spa_location(const u8 *edid,
+ unsigned int size)
+{
+ unsigned int blocks = size / 128;
+ unsigned int block;
+ u8 d;
+
+ /* Sanity check: at least 2 blocks and a multiple of the block size */
+ if (blocks < 2 || size % 128)
+ return 0;
+
+ /*
+ * If there are fewer extension blocks than the size, then update
+ * 'blocks'. It is allowed to have more extension blocks than the size,
+ * since some hardware can only read e.g. 256 bytes of the EDID, even
+ * though more blocks are present. The first CEA-861 extension block
+ * should normally be in block 1 anyway.
+ */
+ if (edid[0x7e] + 1 < blocks)
+ blocks = edid[0x7e] + 1;
+
+ for (block = 1; block < blocks; block++) {
+ unsigned int offset = block * 128;
+
+ /* Skip any non-CEA-861 extension blocks */
+ if (edid[offset] != 0x02 || edid[offset + 1] != 0x03)
+ continue;
+
+ /* search Vendor Specific Data Block (tag 3) */
+ d = edid[offset + 2] & 0x7f;
+ /* Check if there are Data Blocks */
+ if (d <= 4)
+ continue;
+ if (d > 4) {
+ unsigned int i = offset + 4;
+ unsigned int end = offset + d;
+
+ /* Note: 'end' is always < 'size' */
+ do {
+ u8 tag = edid[i] >> 5;
+ u8 len = edid[i] & 0x1f;
+
+ if (tag == 3 && len >= 5 && i + len <= end &&
+ edid[i + 1] == 0x03 &&
+ edid[i + 2] == 0x0c &&
+ edid[i + 3] == 0x00)
+ return i + 4;
+ i += len + 1;
+ } while (i < end);
+ }
+ }
+ return 0;
+}
+
#endif /* _MEDIA_CEC_H */
--
2.18.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/4] cec: integrate cec_validate_phys_addr() in cec-api.c
2018-09-13 12:49 [PATCH 0/4] cec/v4l2: move v4l2-specific functions from cec to v4l2 Hans Verkuil
2018-09-13 12:49 ` [PATCH 1/4] cec: make cec_get_edid_spa_location() an inline function Hans Verkuil
@ 2018-09-13 12:49 ` Hans Verkuil
2018-09-13 12:49 ` [PATCH 3/4] cec/v4l2: move V4L2 specific CEC functions to V4L2 Hans Verkuil
2018-09-13 12:49 ` [PATCH 4/4] cec: remove cec-edid.c Hans Verkuil
3 siblings, 0 replies; 5+ messages in thread
From: Hans Verkuil @ 2018-09-13 12:49 UTC (permalink / raw)
To: linux-media; +Cc: Lars-Peter Clausen, Hans Verkuil
From: Hans Verkuil <hans.verkuil@cisco.com>
The cec_phys_addr_validate() function will be moved to V4L2,
so use a simplified variant of that function in cec-api.c.
cec now no longer calls cec_phys_addr_validate() and it can
be safely moved to V4L2.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
drivers/media/cec/cec-api.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/media/cec/cec-api.c b/drivers/media/cec/cec-api.c
index 19170b1073fa..391b6fd483e1 100644
--- a/drivers/media/cec/cec-api.c
+++ b/drivers/media/cec/cec-api.c
@@ -101,6 +101,23 @@ static long cec_adap_g_phys_addr(struct cec_adapter *adap,
return 0;
}
+static int cec_validate_phys_addr(u16 phys_addr)
+{
+ int i;
+
+ if (phys_addr == CEC_PHYS_ADDR_INVALID)
+ return 0;
+ for (i = 0; i < 16; i += 4)
+ if (phys_addr & (0xf << i))
+ break;
+ if (i == 16)
+ return 0;
+ for (i += 4; i < 16; i += 4)
+ if ((phys_addr & (0xf << i)) == 0)
+ return -EINVAL;
+ return 0;
+}
+
static long cec_adap_s_phys_addr(struct cec_adapter *adap, struct cec_fh *fh,
bool block, __u16 __user *parg)
{
@@ -112,7 +129,7 @@ static long cec_adap_s_phys_addr(struct cec_adapter *adap, struct cec_fh *fh,
if (copy_from_user(&phys_addr, parg, sizeof(phys_addr)))
return -EFAULT;
- err = cec_phys_addr_validate(phys_addr, NULL, NULL);
+ err = cec_validate_phys_addr(phys_addr);
if (err)
return err;
mutex_lock(&adap->lock);
--
2.18.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 3/4] cec/v4l2: move V4L2 specific CEC functions to V4L2
2018-09-13 12:49 [PATCH 0/4] cec/v4l2: move v4l2-specific functions from cec to v4l2 Hans Verkuil
2018-09-13 12:49 ` [PATCH 1/4] cec: make cec_get_edid_spa_location() an inline function Hans Verkuil
2018-09-13 12:49 ` [PATCH 2/4] cec: integrate cec_validate_phys_addr() in cec-api.c Hans Verkuil
@ 2018-09-13 12:49 ` Hans Verkuil
2018-09-13 12:49 ` [PATCH 4/4] cec: remove cec-edid.c Hans Verkuil
3 siblings, 0 replies; 5+ messages in thread
From: Hans Verkuil @ 2018-09-13 12:49 UTC (permalink / raw)
To: linux-media; +Cc: Lars-Peter Clausen, Hans Verkuil
From: Hans Verkuil <hans.verkuil@cisco.com>
Several CEC functions are actually specific for use with receivers,
i.e. they should be part of the V4L2 subsystem, not CEC.
These functions deal with validating and modifying EDIDs for (HDMI)
receivers, and they do not actually have anything to do with the CEC
subsystem and whether or not CEC is enabled. The problem was that if
the CEC_CORE config option was not set, then these functions would
become stubs, but that's not right: they should always be valid.
So replace the cec_ prefix by v4l2_ and move them to v4l2-dv-timings.c.
Update all drivers that call these accordingly.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
---
drivers/media/cec/cec-edid.c | 71 --------
drivers/media/i2c/adv7604.c | 4 +-
drivers/media/i2c/adv7842.c | 4 +-
drivers/media/i2c/tc358743.c | 2 +-
drivers/media/platform/vivid/vivid-vid-cap.c | 4 +-
.../media/platform/vivid/vivid-vid-common.c | 2 +-
drivers/media/v4l2-core/v4l2-dv-timings.c | 151 ++++++++++++++++++
include/media/cec.h | 80 ----------
include/media/v4l2-dv-timings.h | 6 +
9 files changed, 165 insertions(+), 159 deletions(-)
diff --git a/drivers/media/cec/cec-edid.c b/drivers/media/cec/cec-edid.c
index f587e8eaefd8..e2f54eec0829 100644
--- a/drivers/media/cec/cec-edid.c
+++ b/drivers/media/cec/cec-edid.c
@@ -22,74 +22,3 @@ u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size,
return (edid[loc] << 8) | edid[loc + 1];
}
EXPORT_SYMBOL_GPL(cec_get_edid_phys_addr);
-
-void cec_set_edid_phys_addr(u8 *edid, unsigned int size, u16 phys_addr)
-{
- unsigned int loc = cec_get_edid_spa_location(edid, size);
- u8 sum = 0;
- unsigned int i;
-
- if (loc == 0)
- return;
- edid[loc] = phys_addr >> 8;
- edid[loc + 1] = phys_addr & 0xff;
- loc &= ~0x7f;
-
- /* update the checksum */
- for (i = loc; i < loc + 127; i++)
- sum += edid[i];
- edid[i] = 256 - sum;
-}
-EXPORT_SYMBOL_GPL(cec_set_edid_phys_addr);
-
-u16 cec_phys_addr_for_input(u16 phys_addr, u8 input)
-{
- /* Check if input is sane */
- if (WARN_ON(input == 0 || input > 0xf))
- return CEC_PHYS_ADDR_INVALID;
-
- if (phys_addr == 0)
- return input << 12;
-
- if ((phys_addr & 0x0fff) == 0)
- return phys_addr | (input << 8);
-
- if ((phys_addr & 0x00ff) == 0)
- return phys_addr | (input << 4);
-
- if ((phys_addr & 0x000f) == 0)
- return phys_addr | input;
-
- /*
- * All nibbles are used so no valid physical addresses can be assigned
- * to the input.
- */
- return CEC_PHYS_ADDR_INVALID;
-}
-EXPORT_SYMBOL_GPL(cec_phys_addr_for_input);
-
-int cec_phys_addr_validate(u16 phys_addr, u16 *parent, u16 *port)
-{
- int i;
-
- if (parent)
- *parent = phys_addr;
- if (port)
- *port = 0;
- if (phys_addr == CEC_PHYS_ADDR_INVALID)
- return 0;
- for (i = 0; i < 16; i += 4)
- if (phys_addr & (0xf << i))
- break;
- if (i == 16)
- return 0;
- if (parent)
- *parent = phys_addr & (0xfff0 << i);
- if (port)
- *port = (phys_addr >> i) & 0xf;
- for (i += 4; i < 16; i += 4)
- if ((phys_addr & (0xf << i)) == 0)
- return -EINVAL;
- return 0;
-}
-EXPORT_SYMBOL_GPL(cec_phys_addr_validate);
diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index 668be2bca57a..c31673fcd5c1 100644
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -2295,8 +2295,8 @@ static int adv76xx_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
edid->blocks = 2;
return -E2BIG;
}
- pa = cec_get_edid_phys_addr(edid->edid, edid->blocks * 128, &spa_loc);
- err = cec_phys_addr_validate(pa, &pa, NULL);
+ pa = v4l2_get_edid_phys_addr(edid->edid, edid->blocks * 128, &spa_loc);
+ err = v4l2_phys_addr_validate(pa, &pa, NULL);
if (err)
return err;
diff --git a/drivers/media/i2c/adv7842.c b/drivers/media/i2c/adv7842.c
index f1c168bfaaa4..cd63cc6564e9 100644
--- a/drivers/media/i2c/adv7842.c
+++ b/drivers/media/i2c/adv7842.c
@@ -789,8 +789,8 @@ static int edid_write_hdmi_segment(struct v4l2_subdev *sd, u8 port)
if (!state->hdmi_edid.present)
return 0;
- pa = cec_get_edid_phys_addr(edid, 256, &spa_loc);
- err = cec_phys_addr_validate(pa, &pa, NULL);
+ pa = v4l2_get_edid_phys_addr(edid, 256, &spa_loc);
+ err = v4l2_phys_addr_validate(pa, &pa, NULL);
if (err)
return err;
diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c
index 44c41933415a..ef4dbac6bb58 100644
--- a/drivers/media/i2c/tc358743.c
+++ b/drivers/media/i2c/tc358743.c
@@ -1789,7 +1789,7 @@ static int tc358743_s_edid(struct v4l2_subdev *sd,
return -E2BIG;
}
pa = cec_get_edid_phys_addr(edid->edid, edid->blocks * 128, NULL);
- err = cec_phys_addr_validate(pa, &pa, NULL);
+ err = v4l2_phys_addr_validate(pa, &pa, NULL);
if (err)
return err;
diff --git a/drivers/media/platform/vivid/vivid-vid-cap.c b/drivers/media/platform/vivid/vivid-vid-cap.c
index f2c37e959bea..58e14dd1dcd3 100644
--- a/drivers/media/platform/vivid/vivid-vid-cap.c
+++ b/drivers/media/platform/vivid/vivid-vid-cap.c
@@ -1722,7 +1722,7 @@ int vidioc_s_edid(struct file *file, void *_fh,
return -E2BIG;
}
phys_addr = cec_get_edid_phys_addr(edid->edid, edid->blocks * 128, NULL);
- ret = cec_phys_addr_validate(phys_addr, &phys_addr, NULL);
+ ret = v4l2_phys_addr_validate(phys_addr, &phys_addr, NULL);
if (ret)
return ret;
@@ -1738,7 +1738,7 @@ int vidioc_s_edid(struct file *file, void *_fh,
for (i = 0; i < MAX_OUTPUTS && dev->cec_tx_adap[i]; i++)
cec_s_phys_addr(dev->cec_tx_adap[i],
- cec_phys_addr_for_input(phys_addr, i + 1),
+ v4l2_phys_addr_for_input(phys_addr, i + 1),
false);
return 0;
}
diff --git a/drivers/media/platform/vivid/vivid-vid-common.c b/drivers/media/platform/vivid/vivid-vid-common.c
index be531caa2cdf..27a0000a5973 100644
--- a/drivers/media/platform/vivid/vivid-vid-common.c
+++ b/drivers/media/platform/vivid/vivid-vid-common.c
@@ -863,7 +863,7 @@ int vidioc_g_edid(struct file *file, void *_fh,
if (edid->blocks > dev->edid_blocks - edid->start_block)
edid->blocks = dev->edid_blocks - edid->start_block;
if (adap)
- cec_set_edid_phys_addr(dev->edid, dev->edid_blocks * 128, adap->phys_addr);
+ v4l2_set_edid_phys_addr(dev->edid, dev->edid_blocks * 128, adap->phys_addr);
memcpy(edid->edid, dev->edid + edid->start_block * 128, edid->blocks * 128);
return 0;
}
diff --git a/drivers/media/v4l2-core/v4l2-dv-timings.c b/drivers/media/v4l2-core/v4l2-dv-timings.c
index 8f52353b0881..b4e50c5509b7 100644
--- a/drivers/media/v4l2-core/v4l2-dv-timings.c
+++ b/drivers/media/v4l2-core/v4l2-dv-timings.c
@@ -15,6 +15,7 @@
#include <media/v4l2-dv-timings.h>
#include <linux/math64.h>
#include <linux/hdmi.h>
+#include <media/cec.h>
MODULE_AUTHOR("Hans Verkuil");
MODULE_DESCRIPTION("V4L2 DV Timings Helper Functions");
@@ -981,3 +982,153 @@ v4l2_hdmi_rx_colorimetry(const struct hdmi_avi_infoframe *avi,
return c;
}
EXPORT_SYMBOL_GPL(v4l2_hdmi_rx_colorimetry);
+
+/**
+ * v4l2_get_edid_phys_addr() - find and return the physical address
+ *
+ * @edid: pointer to the EDID data
+ * @size: size in bytes of the EDID data
+ * @offset: If not %NULL then the location of the physical address
+ * bytes in the EDID will be returned here. This is set to 0
+ * if there is no physical address found.
+ *
+ * Return: the physical address or CEC_PHYS_ADDR_INVALID if there is none.
+ */
+u16 v4l2_get_edid_phys_addr(const u8 *edid, unsigned int size,
+ unsigned int *offset)
+{
+ unsigned int loc = cec_get_edid_spa_location(edid, size);
+
+ if (offset)
+ *offset = loc;
+ if (loc == 0)
+ return CEC_PHYS_ADDR_INVALID;
+ return (edid[loc] << 8) | edid[loc + 1];
+}
+EXPORT_SYMBOL_GPL(v4l2_get_edid_phys_addr);
+
+/**
+ * v4l2_set_edid_phys_addr() - find and set the physical address
+ *
+ * @edid: pointer to the EDID data
+ * @size: size in bytes of the EDID data
+ * @phys_addr: the new physical address
+ *
+ * This function finds the location of the physical address in the EDID
+ * and fills in the given physical address and updates the checksum
+ * at the end of the EDID block. It does nothing if the EDID doesn't
+ * contain a physical address.
+ */
+void v4l2_set_edid_phys_addr(u8 *edid, unsigned int size, u16 phys_addr)
+{
+ unsigned int loc = cec_get_edid_spa_location(edid, size);
+ u8 sum = 0;
+ unsigned int i;
+
+ if (loc == 0)
+ return;
+ edid[loc] = phys_addr >> 8;
+ edid[loc + 1] = phys_addr & 0xff;
+ loc &= ~0x7f;
+
+ /* update the checksum */
+ for (i = loc; i < loc + 127; i++)
+ sum += edid[i];
+ edid[i] = 256 - sum;
+}
+EXPORT_SYMBOL_GPL(v4l2_set_edid_phys_addr);
+
+/**
+ * v4l2_phys_addr_for_input() - calculate the PA for an input
+ *
+ * @phys_addr: the physical address of the parent
+ * @input: the number of the input port, must be between 1 and 15
+ *
+ * This function calculates a new physical address based on the input
+ * port number. For example:
+ *
+ * PA = 0.0.0.0 and input = 2 becomes 2.0.0.0
+ *
+ * PA = 3.0.0.0 and input = 1 becomes 3.1.0.0
+ *
+ * PA = 3.2.1.0 and input = 5 becomes 3.2.1.5
+ *
+ * PA = 3.2.1.3 and input = 5 becomes f.f.f.f since it maxed out the depth.
+ *
+ * Return: the new physical address or CEC_PHYS_ADDR_INVALID.
+ */
+u16 v4l2_phys_addr_for_input(u16 phys_addr, u8 input)
+{
+ /* Check if input is sane */
+ if (WARN_ON(input == 0 || input > 0xf))
+ return CEC_PHYS_ADDR_INVALID;
+
+ if (phys_addr == 0)
+ return input << 12;
+
+ if ((phys_addr & 0x0fff) == 0)
+ return phys_addr | (input << 8);
+
+ if ((phys_addr & 0x00ff) == 0)
+ return phys_addr | (input << 4);
+
+ if ((phys_addr & 0x000f) == 0)
+ return phys_addr | input;
+
+ /*
+ * All nibbles are used so no valid physical addresses can be assigned
+ * to the input.
+ */
+ return CEC_PHYS_ADDR_INVALID;
+}
+EXPORT_SYMBOL_GPL(v4l2_phys_addr_for_input);
+
+/**
+ * v4l2_phys_addr_validate() - validate a physical address from an EDID
+ *
+ * @phys_addr: the physical address to validate
+ * @parent: if not %NULL, then this is filled with the parents PA.
+ * @port: if not %NULL, then this is filled with the input port.
+ *
+ * This validates a physical address as read from an EDID. If the
+ * PA is invalid (such as 1.0.1.0 since '0' is only allowed at the end),
+ * then it will return -EINVAL.
+ *
+ * The parent PA is passed into %parent and the input port is passed into
+ * %port. For example:
+ *
+ * PA = 0.0.0.0: has parent 0.0.0.0 and input port 0.
+ *
+ * PA = 1.0.0.0: has parent 0.0.0.0 and input port 1.
+ *
+ * PA = 3.2.0.0: has parent 3.0.0.0 and input port 2.
+ *
+ * PA = f.f.f.f: has parent f.f.f.f and input port 0.
+ *
+ * Return: 0 if the PA is valid, -EINVAL if not.
+ */
+int v4l2_phys_addr_validate(u16 phys_addr, u16 *parent, u16 *port)
+{
+ int i;
+
+ if (parent)
+ *parent = phys_addr;
+ if (port)
+ *port = 0;
+ if (phys_addr == CEC_PHYS_ADDR_INVALID)
+ return 0;
+ for (i = 0; i < 16; i += 4)
+ if (phys_addr & (0xf << i))
+ break;
+ if (i == 16)
+ return 0;
+ if (parent)
+ *parent = phys_addr & (0xfff0 << i);
+ if (port)
+ *port = (phys_addr >> i) & 0xf;
+ for (i += 4; i < 16; i += 4)
+ if ((phys_addr & (0xf << i)) == 0)
+ return -EINVAL;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(v4l2_phys_addr_validate);
diff --git a/include/media/cec.h b/include/media/cec.h
index 603f2fa08f62..9f382f0c2970 100644
--- a/include/media/cec.h
+++ b/include/media/cec.h
@@ -332,67 +332,6 @@ void cec_queue_pin_5v_event(struct cec_adapter *adap, bool is_high, ktime_t ts);
u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size,
unsigned int *offset);
-/**
- * cec_set_edid_phys_addr() - find and set the physical address
- *
- * @edid: pointer to the EDID data
- * @size: size in bytes of the EDID data
- * @phys_addr: the new physical address
- *
- * This function finds the location of the physical address in the EDID
- * and fills in the given physical address and updates the checksum
- * at the end of the EDID block. It does nothing if the EDID doesn't
- * contain a physical address.
- */
-void cec_set_edid_phys_addr(u8 *edid, unsigned int size, u16 phys_addr);
-
-/**
- * cec_phys_addr_for_input() - calculate the PA for an input
- *
- * @phys_addr: the physical address of the parent
- * @input: the number of the input port, must be between 1 and 15
- *
- * This function calculates a new physical address based on the input
- * port number. For example:
- *
- * PA = 0.0.0.0 and input = 2 becomes 2.0.0.0
- *
- * PA = 3.0.0.0 and input = 1 becomes 3.1.0.0
- *
- * PA = 3.2.1.0 and input = 5 becomes 3.2.1.5
- *
- * PA = 3.2.1.3 and input = 5 becomes f.f.f.f since it maxed out the depth.
- *
- * Return: the new physical address or CEC_PHYS_ADDR_INVALID.
- */
-u16 cec_phys_addr_for_input(u16 phys_addr, u8 input);
-
-/**
- * cec_phys_addr_validate() - validate a physical address from an EDID
- *
- * @phys_addr: the physical address to validate
- * @parent: if not %NULL, then this is filled with the parents PA.
- * @port: if not %NULL, then this is filled with the input port.
- *
- * This validates a physical address as read from an EDID. If the
- * PA is invalid (such as 1.0.1.0 since '0' is only allowed at the end),
- * then it will return -EINVAL.
- *
- * The parent PA is passed into %parent and the input port is passed into
- * %port. For example:
- *
- * PA = 0.0.0.0: has parent 0.0.0.0 and input port 0.
- *
- * PA = 1.0.0.0: has parent 0.0.0.0 and input port 1.
- *
- * PA = 3.2.0.0: has parent 3.0.0.0 and input port 2.
- *
- * PA = f.f.f.f: has parent f.f.f.f and input port 0.
- *
- * Return: 0 if the PA is valid, -EINVAL if not.
- */
-int cec_phys_addr_validate(u16 phys_addr, u16 *parent, u16 *port);
-
#else
static inline int cec_register_adapter(struct cec_adapter *adap,
@@ -427,25 +366,6 @@ static inline u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size,
return CEC_PHYS_ADDR_INVALID;
}
-static inline void cec_set_edid_phys_addr(u8 *edid, unsigned int size,
- u16 phys_addr)
-{
-}
-
-static inline u16 cec_phys_addr_for_input(u16 phys_addr, u8 input)
-{
- return CEC_PHYS_ADDR_INVALID;
-}
-
-static inline int cec_phys_addr_validate(u16 phys_addr, u16 *parent, u16 *port)
-{
- if (parent)
- *parent = phys_addr;
- if (port)
- *port = 0;
- return 0;
-}
-
#endif
/**
diff --git a/include/media/v4l2-dv-timings.h b/include/media/v4l2-dv-timings.h
index fb355d9577a4..2cc0cabc124f 100644
--- a/include/media/v4l2-dv-timings.h
+++ b/include/media/v4l2-dv-timings.h
@@ -245,4 +245,10 @@ v4l2_hdmi_rx_colorimetry(const struct hdmi_avi_infoframe *avi,
const struct hdmi_vendor_infoframe *hdmi,
unsigned int height);
+u16 v4l2_get_edid_phys_addr(const u8 *edid, unsigned int size,
+ unsigned int *offset);
+void v4l2_set_edid_phys_addr(u8 *edid, unsigned int size, u16 phys_addr);
+u16 v4l2_phys_addr_for_input(u16 phys_addr, u8 input);
+int v4l2_phys_addr_validate(u16 phys_addr, u16 *parent, u16 *port);
+
#endif
--
2.18.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 4/4] cec: remove cec-edid.c
2018-09-13 12:49 [PATCH 0/4] cec/v4l2: move v4l2-specific functions from cec to v4l2 Hans Verkuil
` (2 preceding siblings ...)
2018-09-13 12:49 ` [PATCH 3/4] cec/v4l2: move V4L2 specific CEC functions to V4L2 Hans Verkuil
@ 2018-09-13 12:49 ` Hans Verkuil
3 siblings, 0 replies; 5+ messages in thread
From: Hans Verkuil @ 2018-09-13 12:49 UTC (permalink / raw)
To: linux-media; +Cc: Lars-Peter Clausen, Hans Verkuil
From: Hans Verkuil <hans.verkuil@cisco.com>
Move cec_get_edid_phys_addr() to cec-adap.c. It's not worth keeping
a separate source for this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
---
drivers/media/cec/Makefile | 2 +-
drivers/media/cec/cec-adap.c | 13 +++++++++++++
drivers/media/cec/cec-edid.c | 24 ------------------------
3 files changed, 14 insertions(+), 25 deletions(-)
delete mode 100644 drivers/media/cec/cec-edid.c
diff --git a/drivers/media/cec/Makefile b/drivers/media/cec/Makefile
index 29a2ab9e77c5..ad8677d8c896 100644
--- a/drivers/media/cec/Makefile
+++ b/drivers/media/cec/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-cec-objs := cec-core.o cec-adap.o cec-api.o cec-edid.o
+cec-objs := cec-core.o cec-adap.o cec-api.o
ifeq ($(CONFIG_CEC_NOTIFIER),y)
cec-objs += cec-notifier.o
diff --git a/drivers/media/cec/cec-adap.c b/drivers/media/cec/cec-adap.c
index 030b2602faf0..829878356e1e 100644
--- a/drivers/media/cec/cec-adap.c
+++ b/drivers/media/cec/cec-adap.c
@@ -62,6 +62,19 @@ static unsigned int cec_log_addr2dev(const struct cec_adapter *adap, u8 log_addr
return adap->log_addrs.primary_device_type[i < 0 ? 0 : i];
}
+u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size,
+ unsigned int *offset)
+{
+ unsigned int loc = cec_get_edid_spa_location(edid, size);
+
+ if (offset)
+ *offset = loc;
+ if (loc == 0)
+ return CEC_PHYS_ADDR_INVALID;
+ return (edid[loc] << 8) | edid[loc + 1];
+}
+EXPORT_SYMBOL_GPL(cec_get_edid_phys_addr);
+
/*
* Queue a new event for this filehandle. If ts == 0, then set it
* to the current time.
diff --git a/drivers/media/cec/cec-edid.c b/drivers/media/cec/cec-edid.c
deleted file mode 100644
index e2f54eec0829..000000000000
--- a/drivers/media/cec/cec-edid.c
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * cec-edid - HDMI Consumer Electronics Control EDID & CEC helper functions
- *
- * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <media/cec.h>
-
-u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size,
- unsigned int *offset)
-{
- unsigned int loc = cec_get_edid_spa_location(edid, size);
-
- if (offset)
- *offset = loc;
- if (loc == 0)
- return CEC_PHYS_ADDR_INVALID;
- return (edid[loc] << 8) | edid[loc + 1];
-}
-EXPORT_SYMBOL_GPL(cec_get_edid_phys_addr);
--
2.18.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-09-13 17:59 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-09-13 12:49 [PATCH 0/4] cec/v4l2: move v4l2-specific functions from cec to v4l2 Hans Verkuil
2018-09-13 12:49 ` [PATCH 1/4] cec: make cec_get_edid_spa_location() an inline function Hans Verkuil
2018-09-13 12:49 ` [PATCH 2/4] cec: integrate cec_validate_phys_addr() in cec-api.c Hans Verkuil
2018-09-13 12:49 ` [PATCH 3/4] cec/v4l2: move V4L2 specific CEC functions to V4L2 Hans Verkuil
2018-09-13 12:49 ` [PATCH 4/4] cec: remove cec-edid.c Hans Verkuil
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.