* [PATCH] Device Tree for ASUS Tinker Board S (v2)
@ 2018-09-16 18:16 ` David Summers
0 siblings, 0 replies; 8+ messages in thread
From: David Summers @ 2018-09-16 18:16 UTC (permalink / raw)
To: heiko, robh+dt, mark.rutland; +Cc: linux-rockchip, linux-arm-kernel, devicetree
Thanks to Heiko for comments on the first
The tinkerboard S is an ASUS device, it is similar to the tinker board
but with an eMMC chip, which needs enabling in the device tree.
This patch is split into 3 parts
1) It creates a common include file rk3288-tinker.dtsi and sets up
rk3288-tinker.dts and rk3288-tinker-s.dts to do device trees for the two boards
2) It patches the rk3288-tinker-s.dts to enable eMMC
3) It patches the rk3299-tinker-s.dts to enable WiFi and Bluetooth
I'm not sure if the wifi should be common for both boards (so in the dtsi)
But am sure its needed to enable wifi on the S variant.
I have asked for the dtb to be tested - but sending these patches anyway
to get comments back.
Regards
David Summers
signed-off: "David Summers" <beagleboard@davidjohnsummers.uk>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH] Device Tree for ASUS Tinker Board S (v2)
@ 2018-09-16 18:16 ` David Summers
0 siblings, 0 replies; 8+ messages in thread
From: David Summers @ 2018-09-16 18:16 UTC (permalink / raw)
To: linux-arm-kernel
Thanks to Heiko for comments on the first
The tinkerboard S is an ASUS device, it is similar to the tinker board
but with an eMMC chip, which needs enabling in the device tree.
This patch is split into 3 parts
1) It creates a common include file rk3288-tinker.dtsi and sets up
rk3288-tinker.dts and rk3288-tinker-s.dts to do device trees for the two boards
2) It patches the rk3288-tinker-s.dts to enable eMMC
3) It patches the rk3299-tinker-s.dts to enable WiFi and Bluetooth
I'm not sure if the wifi should be common for both boards (so in the dtsi)
But am sure its needed to enable wifi on the S variant.
I have asked for the dtb to be tested - but sending these patches anyway
to get comments back.
Regards
David Summers
signed-off: "David Summers" <beagleboard@davidjohnsummers.uk>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/3] Device Tree for ASUS Tinker Board S (v2)
2018-09-16 18:16 ` David Summers
@ 2018-09-16 18:16 ` David Summers
-1 siblings, 0 replies; 8+ messages in thread
From: David Summers @ 2018-09-16 18:16 UTC (permalink / raw)
To: heiko, robh+dt, mark.rutland; +Cc: linux-rockchip, linux-arm-kernel, devicetree
+- Asus Tinker board S
+ Required root node properties:
+ - compatible = "asus,rk3288-tinker-s", "rockchip,rk3288";
+
- Kylin RK3036 board:
Required root node properties:
- compatible = "rockchip,kylin-rk3036", "rockchip,rk3036";
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b5bd3de87c33..dc86080c60e3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -864,6 +864,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3288-r89.dtb \
rk3288-rock2-square.dtb \
rk3288-tinker.dtb \
+ rk3288-tinker-s.dtb \
rk3288-veyron-brain.dtb \
rk3288-veyron-jaq.dtb \
rk3288-veyron-jerry.dtb \
diff --git a/arch/arm/boot/dts/rk3288-tinker-s.dts b/arch/arm/boot/dts/rk3288-tinker-s.dts
index e69de29bb2d1..5e1078c6a784 100644
--- a/arch/arm/boot/dts/rk3288-tinker-s.dts
+++ b/arch/arm/boot/dts/rk3288-tinker-s.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "rk3288-tinker.dtsi"
+
+/ {
+ model = "Rockchip RK3288 Asus Tinker Board S";
+ compatible = "asus,rk3288-tinker-s", "rockchip,rk3288";
+};
diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts
index ceade5962899..1e43527aa196 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dts
+++ b/arch/arm/boot/dts/rk3288-tinker.dts
@@ -5,503 +5,9 @@
/dts-v1/;
-#include "rk3288.dtsi"
-#include <dt-bindings/input/input.h>
+#include "rk3288-tinker.dtsi"
/ {
- model = "Rockchip RK3288 Tinker Board";
+ model = "Rockchip RK3288 Asus Tinker Board";
compatible = "asus,rk3288-tinker", "rockchip,rk3288";
-
- chosen {
- stdout-path = "serial2:115200n8";
- };
-
- memory {
- reg = <0x0 0x0 0x0 0x80000000>;
- device_type = "memory";
- };
-
- ext_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <125000000>;
- clock-output-names = "ext_gmac";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- autorepeat;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pwrbtn>;
-
- button@0 {
- gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- label = "GPIO Key Power";
- linux,input-type = <1>;
- wakeup-source;
- debounce-interval = <100>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- act-led {
- gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
- linux,default-trigger="mmc0";
- };
-
- heartbeat-led {
- gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger="heartbeat";
- };
-
- pwr-led {
- gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
- };
-
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,format = "i2s";
- simple-audio-card,name = "rockchip,tinker-codec";
- simple-audio-card,mclk-fs = <512>;
-
- simple-audio-card,codec {
- sound-dai = <&hdmi>;
- };
-
- simple-audio-card,cpu {
- sound-dai = <&i2s>;
- };
- };
-
- vcc_sys: vsys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc_sd: sdmmc-regulator {
- compatible = "regulator-fixed";
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_pwr>;
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <100000>;
- vin-supply = <&vcc_io>;
- };
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_cpu>;
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_MAC>;
- assigned-clock-parents = <&ext_gmac>;
- clock_in_out = "input";
- phy-mode = "rgmii";
- phy-supply = <&vcc33_lan>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio4 7 0>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 1000000>;
- tx_delay = <0x30>;
- rx_delay = <0x10>;
- status = "ok";
-};
-
-&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c5>;
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- status = "okay";
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio0>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
- dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
- <&gpio0 12 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc_sys>;
- vcc2-supply = <&vcc_sys>;
- vcc3-supply = <&vcc_sys>;
- vcc4-supply = <&vcc_sys>;
- vcc6-supply = <&vcc_sys>;
- vcc7-supply = <&vcc_sys>;
- vcc8-supply = <&vcc_io>;
- vcc9-supply = <&vcc_io>;
- vcc10-supply = <&vcc_io>;
- vcc11-supply = <&vcc_sys>;
- vcc12-supply = <&vcc_io>;
- vddio-supply = <&vcc_io>;
-
- regulators {
- vdd_cpu: DCDC_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-name = "vdd_arm";
- regulator-ramp-delay = <6000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: DCDC_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1250000>;
- regulator-name = "vdd_gpu";
- regulator-ramp-delay = <6000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc_ddr";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_io: DCDC_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_io";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc18_ldo1: LDO_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc18_ldo1";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc33_mipi: LDO_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc33_mipi";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_10: LDO_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-name = "vdd_10";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc18_codec: LDO_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc18_codec";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vccio_sd: LDO_REG5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vccio_sd";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vdd10_lcd: LDO_REG6 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-name = "vdd10_lcd";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_18: LDO_REG7 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc_18";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc18_lcd: LDO_REG8 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc18_lcd";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc33_sd: SWITCH_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc33_sd";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc33_lan: SWITCH_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc33_lan";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
- };
- };
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&i2c5 {
- status = "okay";
-};
-
-&i2s {
- #sound-dai-cells = <0>;
- status = "okay";
-};
-
-&io_domains {
- status = "okay";
-
- sdcard-supply = <&vccio_sd>;
-};
-
-&pinctrl {
- pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
- drive-strength = <8>;
- };
-
- pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
- bias-pull-up;
- drive-strength = <8>;
- };
-
- backlight {
- bl_en: bl-en {
- rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- buttons {
- pwrbtn: pwrbtn {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- eth_phy {
- eth_phy_pwr: eth-phy-pwr {
- rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int: pmic-int {
- rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \
- &pcfg_pull_up>;
- };
-
- dvs_1: dvs-1 {
- rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \
- &pcfg_pull_down>;
- };
-
- dvs_2: dvs-2 {
- rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \
- &pcfg_pull_down>;
- };
- };
-
- sdmmc {
- sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
- <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
- <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
- <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
- };
-
- sdmmc_clk: sdmmc-clk {
- rockchip,pins = <6 20 RK_FUNC_1 \
- &pcfg_pull_none_drv_8ma>;
- };
-
- sdmmc_cmd: sdmmc-cmd {
- rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
- };
-
- sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb {
- host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- pwr_3g: pwr-3g {
- rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcc18_ldo1>;
- status ="okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- card-detect-delay = <200>;
- disable-wp; /* wp not hooked up */
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
- status = "okay";
- vmmc-supply = <&vcc33_sd>;
- vqmmc-supply = <&vccio_sd>;
-};
-
-&tsadc {
- rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
- status = "okay";
-};
-
-&uart0 {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&uart3 {
- status = "okay";
-};
-
-&uart4 {
- status = "okay";
-};
-
-&usbphy {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host1 {
- status = "okay";
-};
-
-&usb_otg {
- status= "okay";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
-
-&wdt {
- status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
index e69de29bb2d1..2b38075a2917 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -0,0 +1,504 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "rk3288.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ memory {
+ reg = <0x0 0x0 0x0 0x80000000>;
+ device_type = "memory";
+ };
+
+ ext_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ clock-output-names = "ext_gmac";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwrbtn>;
+
+ button@0 {
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ label = "GPIO Key Power";
+ linux,input-type = <1>;
+ wakeup-source;
+ debounce-interval = <100>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ act-led {
+ gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger="mmc0";
+ };
+
+ heartbeat-led {
+ gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger="heartbeat";
+ };
+
+ pwr-led {
+ gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,name = "rockchip,tinker-codec";
+ simple-audio-card,mclk-fs = <512>;
+
+ simple-audio-card,codec {
+ sound-dai = <&hdmi>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s>;
+ };
+ };
+
+ vcc_sys: vsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwr>;
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ vin-supply = <&vcc_io>;
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ clock_in_out = "input";
+ phy-mode = "rgmii";
+ phy-supply = <&vcc33_lan>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio4 7 0>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+ tx_delay = <0x30>;
+ rx_delay = <0x10>;
+ status = "ok";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c5>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
+ <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_io>;
+ vcc9-supply = <&vcc_io>;
+ vcc10-supply = <&vcc_io>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc_io>;
+ vddio-supply = <&vcc_io>;
+
+ regulators {
+ vdd_cpu: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-name = "vdd_arm";
+ regulator-ramp-delay = <6000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd_gpu";
+ regulator-ramp-delay = <6000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_io";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc18_ldo1: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_ldo1";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc33_mipi: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc33_mipi";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd_10";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc18_codec: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_codec";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vdd10_lcd: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_18: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_18";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc18_lcd: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc33_sd: SWITCH_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc33_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc33_lan: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc33_lan";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2s {
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+
+ sdcard-supply = <&vccio_sd>;
+};
+
+&pinctrl {
+ pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ backlight {
+ bl_en: bl-en {
+ rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ buttons {
+ pwrbtn: pwrbtn {
+ rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ eth_phy {
+ eth_phy_pwr: eth-phy-pwr {
+ rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \
+ &pcfg_pull_up>;
+ };
+
+ dvs_1: dvs-1 {
+ rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \
+ &pcfg_pull_down>;
+ };
+
+ dvs_2: dvs-2 {
+ rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \
+ &pcfg_pull_down>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ };
+
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins = <6 20 RK_FUNC_1 \
+ &pcfg_pull_none_drv_8ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ };
+
+ sdmmc_pwr: sdmmc-pwr {
+ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pwr_3g: pwr-3g {
+ rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc18_ldo1>;
+ status ="okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ disable-wp; /* wp not hooked up */
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ status = "okay";
+ vmmc-supply = <&vcc33_sd>;
+ vqmmc-supply = <&vccio_sd>;
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host1 {
+ status = "okay";
+};
+
+&usb_otg {
+ status= "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 1/3] Device Tree for ASUS Tinker Board S (v2)
@ 2018-09-16 18:16 ` David Summers
0 siblings, 0 replies; 8+ messages in thread
From: David Summers @ 2018-09-16 18:16 UTC (permalink / raw)
To: linux-arm-kernel
+- Asus Tinker board S
+ Required root node properties:
+ - compatible = "asus,rk3288-tinker-s", "rockchip,rk3288";
+
- Kylin RK3036 board:
Required root node properties:
- compatible = "rockchip,kylin-rk3036", "rockchip,rk3036";
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b5bd3de87c33..dc86080c60e3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -864,6 +864,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3288-r89.dtb \
rk3288-rock2-square.dtb \
rk3288-tinker.dtb \
+ rk3288-tinker-s.dtb \
rk3288-veyron-brain.dtb \
rk3288-veyron-jaq.dtb \
rk3288-veyron-jerry.dtb \
diff --git a/arch/arm/boot/dts/rk3288-tinker-s.dts b/arch/arm/boot/dts/rk3288-tinker-s.dts
index e69de29bb2d1..5e1078c6a784 100644
--- a/arch/arm/boot/dts/rk3288-tinker-s.dts
+++ b/arch/arm/boot/dts/rk3288-tinker-s.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "rk3288-tinker.dtsi"
+
+/ {
+ model = "Rockchip RK3288 Asus Tinker Board S";
+ compatible = "asus,rk3288-tinker-s", "rockchip,rk3288";
+};
diff --git a/arch/arm/boot/dts/rk3288-tinker.dts b/arch/arm/boot/dts/rk3288-tinker.dts
index ceade5962899..1e43527aa196 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dts
+++ b/arch/arm/boot/dts/rk3288-tinker.dts
@@ -5,503 +5,9 @@
/dts-v1/;
-#include "rk3288.dtsi"
-#include <dt-bindings/input/input.h>
+#include "rk3288-tinker.dtsi"
/ {
- model = "Rockchip RK3288 Tinker Board";
+ model = "Rockchip RK3288 Asus Tinker Board";
compatible = "asus,rk3288-tinker", "rockchip,rk3288";
-
- chosen {
- stdout-path = "serial2:115200n8";
- };
-
- memory {
- reg = <0x0 0x0 0x0 0x80000000>;
- device_type = "memory";
- };
-
- ext_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <125000000>;
- clock-output-names = "ext_gmac";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- autorepeat;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pwrbtn>;
-
- button at 0 {
- gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- label = "GPIO Key Power";
- linux,input-type = <1>;
- wakeup-source;
- debounce-interval = <100>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- act-led {
- gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
- linux,default-trigger="mmc0";
- };
-
- heartbeat-led {
- gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger="heartbeat";
- };
-
- pwr-led {
- gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
- };
-
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,format = "i2s";
- simple-audio-card,name = "rockchip,tinker-codec";
- simple-audio-card,mclk-fs = <512>;
-
- simple-audio-card,codec {
- sound-dai = <&hdmi>;
- };
-
- simple-audio-card,cpu {
- sound-dai = <&i2s>;
- };
- };
-
- vcc_sys: vsys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc_sd: sdmmc-regulator {
- compatible = "regulator-fixed";
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_pwr>;
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <100000>;
- vin-supply = <&vcc_io>;
- };
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_cpu>;
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_MAC>;
- assigned-clock-parents = <&ext_gmac>;
- clock_in_out = "input";
- phy-mode = "rgmii";
- phy-supply = <&vcc33_lan>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio4 7 0>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 1000000>;
- tx_delay = <0x30>;
- rx_delay = <0x10>;
- status = "ok";
-};
-
-&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c5>;
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- status = "okay";
-
- rk808: pmic at 1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio0>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
- dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
- <&gpio0 12 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc_sys>;
- vcc2-supply = <&vcc_sys>;
- vcc3-supply = <&vcc_sys>;
- vcc4-supply = <&vcc_sys>;
- vcc6-supply = <&vcc_sys>;
- vcc7-supply = <&vcc_sys>;
- vcc8-supply = <&vcc_io>;
- vcc9-supply = <&vcc_io>;
- vcc10-supply = <&vcc_io>;
- vcc11-supply = <&vcc_sys>;
- vcc12-supply = <&vcc_io>;
- vddio-supply = <&vcc_io>;
-
- regulators {
- vdd_cpu: DCDC_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-name = "vdd_arm";
- regulator-ramp-delay = <6000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: DCDC_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1250000>;
- regulator-name = "vdd_gpu";
- regulator-ramp-delay = <6000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc_ddr";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_io: DCDC_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_io";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc18_ldo1: LDO_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc18_ldo1";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc33_mipi: LDO_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc33_mipi";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_10: LDO_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-name = "vdd_10";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc18_codec: LDO_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc18_codec";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vccio_sd: LDO_REG5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vccio_sd";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vdd10_lcd: LDO_REG6 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-name = "vdd10_lcd";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_18: LDO_REG7 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc_18";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc18_lcd: LDO_REG8 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc18_lcd";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc33_sd: SWITCH_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc33_sd";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc33_lan: SWITCH_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc33_lan";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
- };
- };
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&i2c5 {
- status = "okay";
-};
-
-&i2s {
- #sound-dai-cells = <0>;
- status = "okay";
-};
-
-&io_domains {
- status = "okay";
-
- sdcard-supply = <&vccio_sd>;
-};
-
-&pinctrl {
- pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
- drive-strength = <8>;
- };
-
- pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
- bias-pull-up;
- drive-strength = <8>;
- };
-
- backlight {
- bl_en: bl-en {
- rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- buttons {
- pwrbtn: pwrbtn {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- eth_phy {
- eth_phy_pwr: eth-phy-pwr {
- rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int: pmic-int {
- rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \
- &pcfg_pull_up>;
- };
-
- dvs_1: dvs-1 {
- rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \
- &pcfg_pull_down>;
- };
-
- dvs_2: dvs-2 {
- rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \
- &pcfg_pull_down>;
- };
- };
-
- sdmmc {
- sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
- <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
- <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
- <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
- };
-
- sdmmc_clk: sdmmc-clk {
- rockchip,pins = <6 20 RK_FUNC_1 \
- &pcfg_pull_none_drv_8ma>;
- };
-
- sdmmc_cmd: sdmmc-cmd {
- rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
- };
-
- sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb {
- host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- pwr_3g: pwr-3g {
- rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcc18_ldo1>;
- status ="okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- card-detect-delay = <200>;
- disable-wp; /* wp not hooked up */
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
- status = "okay";
- vmmc-supply = <&vcc33_sd>;
- vqmmc-supply = <&vccio_sd>;
-};
-
-&tsadc {
- rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
- status = "okay";
-};
-
-&uart0 {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&uart3 {
- status = "okay";
-};
-
-&uart4 {
- status = "okay";
-};
-
-&usbphy {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host1 {
- status = "okay";
-};
-
-&usb_otg {
- status= "okay";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
-
-&wdt {
- status = "okay";
};
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
index e69de29bb2d1..2b38075a2917 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -0,0 +1,504 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "rk3288.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ memory {
+ reg = <0x0 0x0 0x0 0x80000000>;
+ device_type = "memory";
+ };
+
+ ext_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ clock-output-names = "ext_gmac";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwrbtn>;
+
+ button at 0 {
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ label = "GPIO Key Power";
+ linux,input-type = <1>;
+ wakeup-source;
+ debounce-interval = <100>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ act-led {
+ gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger="mmc0";
+ };
+
+ heartbeat-led {
+ gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger="heartbeat";
+ };
+
+ pwr-led {
+ gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,name = "rockchip,tinker-codec";
+ simple-audio-card,mclk-fs = <512>;
+
+ simple-audio-card,codec {
+ sound-dai = <&hdmi>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s>;
+ };
+ };
+
+ vcc_sys: vsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwr>;
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ vin-supply = <&vcc_io>;
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ clock_in_out = "input";
+ phy-mode = "rgmii";
+ phy-supply = <&vcc33_lan>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio4 7 0>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+ tx_delay = <0x30>;
+ rx_delay = <0x10>;
+ status = "ok";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c5>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ rk808: pmic at 1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
+ <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_io>;
+ vcc9-supply = <&vcc_io>;
+ vcc10-supply = <&vcc_io>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc_io>;
+ vddio-supply = <&vcc_io>;
+
+ regulators {
+ vdd_cpu: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-name = "vdd_arm";
+ regulator-ramp-delay = <6000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd_gpu";
+ regulator-ramp-delay = <6000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_io";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc18_ldo1: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_ldo1";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc33_mipi: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc33_mipi";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd_10";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc18_codec: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_codec";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vdd10_lcd: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_18: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_18";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc18_lcd: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc33_sd: SWITCH_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc33_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc33_lan: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc33_lan";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2s {
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+
+ sdcard-supply = <&vccio_sd>;
+};
+
+&pinctrl {
+ pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ backlight {
+ bl_en: bl-en {
+ rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ buttons {
+ pwrbtn: pwrbtn {
+ rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ eth_phy {
+ eth_phy_pwr: eth-phy-pwr {
+ rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \
+ &pcfg_pull_up>;
+ };
+
+ dvs_1: dvs-1 {
+ rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \
+ &pcfg_pull_down>;
+ };
+
+ dvs_2: dvs-2 {
+ rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \
+ &pcfg_pull_down>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ };
+
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins = <6 20 RK_FUNC_1 \
+ &pcfg_pull_none_drv_8ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ };
+
+ sdmmc_pwr: sdmmc-pwr {
+ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pwr_3g: pwr-3g {
+ rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc18_ldo1>;
+ status ="okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ disable-wp; /* wp not hooked up */
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ status = "okay";
+ vmmc-supply = <&vcc33_sd>;
+ vqmmc-supply = <&vccio_sd>;
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host1 {
+ status = "okay";
+};
+
+&usb_otg {
+ status= "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/3] Device Tree for ASUS Tinker Board S (v2)
2018-09-16 18:16 ` David Summers
@ 2018-09-16 18:16 ` David Summers
-1 siblings, 0 replies; 8+ messages in thread
From: David Summers @ 2018-09-16 18:16 UTC (permalink / raw)
To: heiko, robh+dt, mark.rutland; +Cc: linux-rockchip, devicetree, linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 2/3] Device Tree for ASUS Tinker Board S (v2)
@ 2018-09-16 18:16 ` David Summers
0 siblings, 0 replies; 8+ messages in thread
From: David Summers @ 2018-09-16 18:16 UTC (permalink / raw)
To: linux-arm-kernel
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 3/3] Device Tree for ASUS Tinker Board S (v2)
2018-09-16 18:16 ` David Summers
@ 2018-09-16 18:16 ` David Summers
-1 siblings, 0 replies; 8+ messages in thread
From: David Summers @ 2018-09-16 18:16 UTC (permalink / raw)
To: heiko-4mtYJXux2i+zQB+pC5nmwQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
mark.rutland-5wv7dgnIgG8
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA
&emmc {
@@ -25,3 +114,7 @@
mmc-ddr-1_8v;
status = "okay";
};
+
+&uart0 {
+ pinctrl-0 = <&uart0_xfer>, <&uart0_cts>;
+};
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 3/3] Device Tree for ASUS Tinker Board S (v2)
@ 2018-09-16 18:16 ` David Summers
0 siblings, 0 replies; 8+ messages in thread
From: David Summers @ 2018-09-16 18:16 UTC (permalink / raw)
To: linux-arm-kernel
&emmc {
@@ -25,3 +114,7 @@
mmc-ddr-1_8v;
status = "okay";
};
+
+&uart0 {
+ pinctrl-0 = <&uart0_xfer>, <&uart0_cts>;
+};
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2018-09-16 18:16 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-09-16 18:16 [PATCH] Device Tree for ASUS Tinker Board S (v2) David Summers
2018-09-16 18:16 ` David Summers
2018-09-16 18:16 ` [PATCH 1/3] " David Summers
2018-09-16 18:16 ` David Summers
2018-09-16 18:16 ` [PATCH 2/3] " David Summers
2018-09-16 18:16 ` David Summers
[not found] ` <20180916181636.7938-1-beagleboard-8lkWs+DogrrqRUWtDFdff/XRex20P6io@public.gmane.org>
2018-09-16 18:16 ` [PATCH 3/3] " David Summers
2018-09-16 18:16 ` David Summers
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.