All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Jingoo Han <jingoohan1@gmail.com>,
	Joao Pinto <Joao.Pinto@synopsys.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Rob Herring <robh+dt@kernel.org>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Murali Karicheri <m-karicheri2@ti.com>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	<Gustavo.Pimentel@synopsys.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
	Santosh Shilimkar <ssantosh@kernel.org>,
	Tero Kristo <t-kristo@ti.com>, Nishanth Menon <nm@ti.com>,
	<linux-pci@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: [RFC PATCH 12/40] PCI: keystone: Use syscon APIs to get device id from control module
Date: Fri, 21 Sep 2018 15:51:27 +0530	[thread overview]
Message-ID: <20180921102155.22839-13-kishon@ti.com> (raw)
In-Reply-To: <20180921102155.22839-1-kishon@ti.com>

Control module registers should be read using syscon APIs.
pci-keystone.c uses platform_get_resource to get control module registers.
Fix it here by using syscon APIs to get device id from control module.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/dwc/pci-keystone.c | 46 +++++++++++++++--------
 1 file changed, 31 insertions(+), 15 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index e19ba065ebd5..505e13b1197d 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -15,12 +15,14 @@
 #include <linux/interrupt.h>
 #include <linux/irqdomain.h>
 #include <linux/init.h>
+#include <linux/mfd/syscon.h>
 #include <linux/msi.h>
 #include <linux/of_irq.h>
 #include <linux/of.h>
 #include <linux/of_pci.h>
 #include <linux/platform_device.h>
 #include <linux/phy/phy.h>
+#include <linux/regmap.h>
 #include <linux/resource.h>
 #include <linux/signal.h>
 
@@ -28,6 +30,9 @@
 
 #define DRIVER_NAME	"keystone-pcie"
 
+#define PCIE_VENDORID_MASK	0xffff
+#define PCIE_DEVICEID_SHIFT	16
+
 /* DEV_STAT_CTRL */
 #define PCIE_CAP_BASE		0x70
 
@@ -92,8 +97,6 @@ static void ks_pcie_stop_link(struct dw_pcie *pci);
 struct keystone_pcie {
 	struct dw_pcie		*pci;
 	struct	clk		*clk;
-	/* PCI Device ID */
-	u32			device_id;
 	int			msi_host_irq;
 	struct			device_node *msi_intc_np;
 	struct irq_domain	*legacy_irq_domain;
@@ -588,6 +591,29 @@ static int ks_pcie_fault(unsigned long addr, unsigned int fsr,
 	return 0;
 }
 
+static int __init ks_pcie_init_id(struct keystone_pcie *ks_pcie)
+{
+	int ret;
+	unsigned int id;
+	struct regmap *devctrl_regs;
+	struct dw_pcie *pci = ks_pcie->pci;
+	struct device *dev = pci->dev;
+	struct device_node *np = dev->of_node;
+
+	devctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-pcie-id");
+	if (IS_ERR(devctrl_regs))
+		return PTR_ERR(devctrl_regs);
+
+	ret = regmap_read(devctrl_regs, 0, &id);
+	if (ret)
+		return ret;
+
+	dw_pcie_writew_dbi(pci, PCI_VENDOR_ID, id & PCIE_VENDORID_MASK);
+	dw_pcie_writew_dbi(pci, PCI_DEVICE_ID, id >> PCIE_DEVICEID_SHIFT);
+
+	return 0;
+}
+
 static int __init ks_pcie_host_init(struct pcie_port *pp)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
@@ -608,8 +634,9 @@ static int __init ks_pcie_host_init(struct pcie_port *pp)
 	writew(PCI_IO_RANGE_TYPE_32 | (PCI_IO_RANGE_TYPE_32 << 8),
 			pci->dbi_base + PCI_IO_BASE);
 
-	/* update the Vendor ID */
-	writew(ks_pcie->device_id, pci->dbi_base + PCI_DEVICE_ID);
+	ret = ks_pcie_init_id(ks_pcie);
+	if (ret < 0)
+		return ret;
 
 	/*
 	 * PCIe access errors that result into OCP errors are caught by ARM as
@@ -738,8 +765,6 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct dw_pcie *pci;
 	struct keystone_pcie *ks_pcie;
-	struct resource *res;
-	void __iomem *reg_p;
 	struct phy *phy;
 	int ret;
 	int irq;
@@ -768,15 +793,6 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 			return ret;
 	}
 
-	/* index 2 is to read PCI DEVICE_ID */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
-	reg_p = devm_ioremap_resource(dev, res);
-	if (IS_ERR(reg_p))
-		return PTR_ERR(reg_p);
-	ks_pcie->device_id = readl(reg_p) >> 16;
-	devm_iounmap(dev, reg_p);
-	devm_release_mem_region(dev, res->start, resource_size(res));
-
 	ks_pcie->np = dev->of_node;
 
 	irq = platform_get_irq(pdev, 0);
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Jingoo Han <jingoohan1@gmail.com>,
	Joao Pinto <Joao.Pinto@synopsys.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Rob Herring <robh+dt@kernel.org>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Murali Karicheri <m-karicheri2@ti.com>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Gustavo.Pimentel@synopsys.com
Cc: Mark Rutland <mark.rutland@arm.com>,
	Santosh Shilimkar <ssantosh@kernel.org>,
	Tero Kristo <t-kristo@ti.com>, Nishanth Menon <nm@ti.com>,
	linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 12/40] PCI: keystone: Use syscon APIs to get device id from control module
Date: Fri, 21 Sep 2018 15:51:27 +0530	[thread overview]
Message-ID: <20180921102155.22839-13-kishon@ti.com> (raw)
In-Reply-To: <20180921102155.22839-1-kishon@ti.com>

Control module registers should be read using syscon APIs.
pci-keystone.c uses platform_get_resource to get control module registers.
Fix it here by using syscon APIs to get device id from control module.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/dwc/pci-keystone.c | 46 +++++++++++++++--------
 1 file changed, 31 insertions(+), 15 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index e19ba065ebd5..505e13b1197d 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -15,12 +15,14 @@
 #include <linux/interrupt.h>
 #include <linux/irqdomain.h>
 #include <linux/init.h>
+#include <linux/mfd/syscon.h>
 #include <linux/msi.h>
 #include <linux/of_irq.h>
 #include <linux/of.h>
 #include <linux/of_pci.h>
 #include <linux/platform_device.h>
 #include <linux/phy/phy.h>
+#include <linux/regmap.h>
 #include <linux/resource.h>
 #include <linux/signal.h>
 
@@ -28,6 +30,9 @@
 
 #define DRIVER_NAME	"keystone-pcie"
 
+#define PCIE_VENDORID_MASK	0xffff
+#define PCIE_DEVICEID_SHIFT	16
+
 /* DEV_STAT_CTRL */
 #define PCIE_CAP_BASE		0x70
 
@@ -92,8 +97,6 @@ static void ks_pcie_stop_link(struct dw_pcie *pci);
 struct keystone_pcie {
 	struct dw_pcie		*pci;
 	struct	clk		*clk;
-	/* PCI Device ID */
-	u32			device_id;
 	int			msi_host_irq;
 	struct			device_node *msi_intc_np;
 	struct irq_domain	*legacy_irq_domain;
@@ -588,6 +591,29 @@ static int ks_pcie_fault(unsigned long addr, unsigned int fsr,
 	return 0;
 }
 
+static int __init ks_pcie_init_id(struct keystone_pcie *ks_pcie)
+{
+	int ret;
+	unsigned int id;
+	struct regmap *devctrl_regs;
+	struct dw_pcie *pci = ks_pcie->pci;
+	struct device *dev = pci->dev;
+	struct device_node *np = dev->of_node;
+
+	devctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-pcie-id");
+	if (IS_ERR(devctrl_regs))
+		return PTR_ERR(devctrl_regs);
+
+	ret = regmap_read(devctrl_regs, 0, &id);
+	if (ret)
+		return ret;
+
+	dw_pcie_writew_dbi(pci, PCI_VENDOR_ID, id & PCIE_VENDORID_MASK);
+	dw_pcie_writew_dbi(pci, PCI_DEVICE_ID, id >> PCIE_DEVICEID_SHIFT);
+
+	return 0;
+}
+
 static int __init ks_pcie_host_init(struct pcie_port *pp)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
@@ -608,8 +634,9 @@ static int __init ks_pcie_host_init(struct pcie_port *pp)
 	writew(PCI_IO_RANGE_TYPE_32 | (PCI_IO_RANGE_TYPE_32 << 8),
 			pci->dbi_base + PCI_IO_BASE);
 
-	/* update the Vendor ID */
-	writew(ks_pcie->device_id, pci->dbi_base + PCI_DEVICE_ID);
+	ret = ks_pcie_init_id(ks_pcie);
+	if (ret < 0)
+		return ret;
 
 	/*
 	 * PCIe access errors that result into OCP errors are caught by ARM as
@@ -738,8 +765,6 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct dw_pcie *pci;
 	struct keystone_pcie *ks_pcie;
-	struct resource *res;
-	void __iomem *reg_p;
 	struct phy *phy;
 	int ret;
 	int irq;
@@ -768,15 +793,6 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 			return ret;
 	}
 
-	/* index 2 is to read PCI DEVICE_ID */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
-	reg_p = devm_ioremap_resource(dev, res);
-	if (IS_ERR(reg_p))
-		return PTR_ERR(reg_p);
-	ks_pcie->device_id = readl(reg_p) >> 16;
-	devm_iounmap(dev, reg_p);
-	devm_release_mem_region(dev, res->start, resource_size(res));
-
 	ks_pcie->np = dev->of_node;
 
 	irq = platform_get_irq(pdev, 0);
-- 
2.17.1

WARNING: multiple messages have this Message-ID (diff)
From: kishon@ti.com (Kishon Vijay Abraham I)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 12/40] PCI: keystone: Use syscon APIs to get device id from control module
Date: Fri, 21 Sep 2018 15:51:27 +0530	[thread overview]
Message-ID: <20180921102155.22839-13-kishon@ti.com> (raw)
In-Reply-To: <20180921102155.22839-1-kishon@ti.com>

Control module registers should be read using syscon APIs.
pci-keystone.c uses platform_get_resource to get control module registers.
Fix it here by using syscon APIs to get device id from control module.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/dwc/pci-keystone.c | 46 +++++++++++++++--------
 1 file changed, 31 insertions(+), 15 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index e19ba065ebd5..505e13b1197d 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -15,12 +15,14 @@
 #include <linux/interrupt.h>
 #include <linux/irqdomain.h>
 #include <linux/init.h>
+#include <linux/mfd/syscon.h>
 #include <linux/msi.h>
 #include <linux/of_irq.h>
 #include <linux/of.h>
 #include <linux/of_pci.h>
 #include <linux/platform_device.h>
 #include <linux/phy/phy.h>
+#include <linux/regmap.h>
 #include <linux/resource.h>
 #include <linux/signal.h>
 
@@ -28,6 +30,9 @@
 
 #define DRIVER_NAME	"keystone-pcie"
 
+#define PCIE_VENDORID_MASK	0xffff
+#define PCIE_DEVICEID_SHIFT	16
+
 /* DEV_STAT_CTRL */
 #define PCIE_CAP_BASE		0x70
 
@@ -92,8 +97,6 @@ static void ks_pcie_stop_link(struct dw_pcie *pci);
 struct keystone_pcie {
 	struct dw_pcie		*pci;
 	struct	clk		*clk;
-	/* PCI Device ID */
-	u32			device_id;
 	int			msi_host_irq;
 	struct			device_node *msi_intc_np;
 	struct irq_domain	*legacy_irq_domain;
@@ -588,6 +591,29 @@ static int ks_pcie_fault(unsigned long addr, unsigned int fsr,
 	return 0;
 }
 
+static int __init ks_pcie_init_id(struct keystone_pcie *ks_pcie)
+{
+	int ret;
+	unsigned int id;
+	struct regmap *devctrl_regs;
+	struct dw_pcie *pci = ks_pcie->pci;
+	struct device *dev = pci->dev;
+	struct device_node *np = dev->of_node;
+
+	devctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-pcie-id");
+	if (IS_ERR(devctrl_regs))
+		return PTR_ERR(devctrl_regs);
+
+	ret = regmap_read(devctrl_regs, 0, &id);
+	if (ret)
+		return ret;
+
+	dw_pcie_writew_dbi(pci, PCI_VENDOR_ID, id & PCIE_VENDORID_MASK);
+	dw_pcie_writew_dbi(pci, PCI_DEVICE_ID, id >> PCIE_DEVICEID_SHIFT);
+
+	return 0;
+}
+
 static int __init ks_pcie_host_init(struct pcie_port *pp)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
@@ -608,8 +634,9 @@ static int __init ks_pcie_host_init(struct pcie_port *pp)
 	writew(PCI_IO_RANGE_TYPE_32 | (PCI_IO_RANGE_TYPE_32 << 8),
 			pci->dbi_base + PCI_IO_BASE);
 
-	/* update the Vendor ID */
-	writew(ks_pcie->device_id, pci->dbi_base + PCI_DEVICE_ID);
+	ret = ks_pcie_init_id(ks_pcie);
+	if (ret < 0)
+		return ret;
 
 	/*
 	 * PCIe access errors that result into OCP errors are caught by ARM as
@@ -738,8 +765,6 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct dw_pcie *pci;
 	struct keystone_pcie *ks_pcie;
-	struct resource *res;
-	void __iomem *reg_p;
 	struct phy *phy;
 	int ret;
 	int irq;
@@ -768,15 +793,6 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
 			return ret;
 	}
 
-	/* index 2 is to read PCI DEVICE_ID */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
-	reg_p = devm_ioremap_resource(dev, res);
-	if (IS_ERR(reg_p))
-		return PTR_ERR(reg_p);
-	ks_pcie->device_id = readl(reg_p) >> 16;
-	devm_iounmap(dev, reg_p);
-	devm_release_mem_region(dev, res->start, resource_size(res));
-
 	ks_pcie->np = dev->of_node;
 
 	irq = platform_get_irq(pdev, 0);
-- 
2.17.1

  parent reply	other threads:[~2018-09-21 10:23 UTC|newest]

Thread overview: 141+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-21 10:21 [RFC PATCH 00/40] Cleanup pci-keystone.c and Add AM654 PCIe Support Kishon Vijay Abraham I
2018-09-21 10:21 ` Kishon Vijay Abraham I
2018-09-21 10:21 ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 01/40] PCI: keystone: Use quirk to limit MRRS for K2G Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 02/40] PCI: keystone: Use quirk to set MRRS for PCI host bridge Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 03/40] PCI: keystone: Move dw_pcie_setup_rc out of ks_pcie_establish_link() Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 04/40] PCI: keystone: Do not initiate link training multiple times Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 05/40] PCI: keystone: Remove unused argument from ks_dw_pcie_host_init() Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 06/40] PCI: keystone: Add start_link/stop_link dw_pcie_ops Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 07/40] PCI: keystone: Merge pci-keystone-dw.c and pci-keystone.c Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 08/40] PCI: keystone: Cleanup MSI/legacy interrupt configuration and handling Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2021-07-03 21:01   ` Krzysztof Wilczyński
2021-07-03 21:01     ` Krzysztof Wilczyński
2021-07-05  8:21     ` Kishon Vijay Abraham I
2021-07-05  8:21       ` Kishon Vijay Abraham I
2021-07-06 20:34       ` Krzysztof Wilczyński
2021-07-06 20:34         ` Krzysztof Wilczyński
2018-09-21 10:21 ` [RFC PATCH 09/40] PCI: keystone: Remove redundant platform_set_drvdata Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 10/40] PCI: keystone: Use uniform function naming convention Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 11/40] dt-bindings: PCI: keystone: Add bindings to get device control module Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-25 11:25   ` Rob Herring
2018-09-25 11:25     ` Rob Herring
2018-09-21 10:21 ` Kishon Vijay Abraham I [this message]
2018-09-21 10:21   ` [RFC PATCH 12/40] PCI: keystone: Use syscon APIs to get device id from " Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 13/40] dt-bindings: PCI: keystone: Add "reg-names" binding information Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-24 23:00   ` Rob Herring
2018-09-24 23:00     ` Rob Herring
2018-11-02  7:19     ` Kishon Vijay Abraham I
2018-11-02  7:19       ` Kishon Vijay Abraham I
2018-11-02  7:19       ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 14/40] PCI: keystone: Use platform_get_resource_byname to get memory resources Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 15/40] PCI: keystone: Cleanup PHY handling Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 16/40] PCI: keystone: Invoke pm_runtime APIs to enable clock Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 17/40] PCI: keystone: Cleanup configuration space access Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 18/40] PCI: keystone: Get number of OB windows from DT and cleanup MEM space configuration Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 19/40] PCI: keystone: Cleanup set_dbi_mode and get_dbi_mode Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 20/40] PCI: keystone: Cleanup ks_pcie_link_up() Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 21/40] PCI: keystone: Add debug error message for all errors Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 22/40] PCI: keystone: Reorder header file in alphabetical order Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 23/40] PCI: keystone: Cleanup macros defined in pci-keystone.c Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 24/40] PCI: keystone: Move initializations to appropriate places Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 25/40] dt-bindings: PCI: Add dt-binding to configure PCIe mode Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 26/40] PCI: keystone: Explicitly set the " Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 27/40] dt-bindings: PCI: Document "atu" reg-names Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 28/40] PCI: dwc: Fix ATU identification for designware version >= 4.80 Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 29/40] PCI: keystone: Prevent ARM32 specific code to be compiled for ARM64 Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 30/40] dt-bindings: PCI: Add PCI RC dt binding documentation for AM654 Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 31/40] PCI: keystone: Add support for PCIe in AM654x Platforms Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 32/40] phy: core: Invoke pm_runtime_get_*/pm_runtime_put_* before invoking reset callback Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 33/40] dt-bindings: phy: ti: Add dt binding documentation for SERDES in AM654x SoC Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 34/40] phy: ti: Add a new SERDES driver for TI's " Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 35/40] ARM: dts: keystone-k2e: Use the updated binding to describe PCIe in k2e Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 36/40] arm64: dts: k3-am6: Add "socionext,synquacer-pre-its" property to gic_its Kishon Vijay Abraham I
2018-09-21 10:21   ` [RFC PATCH 36/40] arm64: dts: k3-am6: Add "socionext, synquacer-pre-its" " Kishon Vijay Abraham I
2018-09-21 10:21   ` [RFC PATCH 36/40] arm64: dts: k3-am6: Add "socionext,synquacer-pre-its" " Kishon Vijay Abraham I
2018-09-21 19:42   ` Nishanth Menon
2018-09-21 19:42     ` Nishanth Menon
2018-09-21 19:42     ` Nishanth Menon
2018-09-21 10:21 ` [RFC PATCH 37/40] arm64: dts: k3-am6: Add Main System Control Module node Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 38/40] arm64: dts: k3-am6: Add mux-controller dt node required for muxing SERDES Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 39/40] arm64: dts: k3-am6: Add SERDES DT node Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21 ` [RFC PATCH 40/40] arm64: dts: k3-am6: Add Root Complex PCIe dt node Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-09-21 10:21   ` Kishon Vijay Abraham I
2018-10-12 13:47 ` [RFC PATCH 00/40] Cleanup pci-keystone.c and Add AM654 PCIe Support Lorenzo Pieralisi
2018-10-12 13:47   ` Lorenzo Pieralisi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180921102155.22839-13-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=Gustavo.Pimentel@synopsys.com \
    --cc=Joao.Pinto@synopsys.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jingoohan1@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=m-karicheri2@ti.com \
    --cc=mark.rutland@arm.com \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=ssantosh@kernel.org \
    --cc=t-kristo@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.