All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gagandeep Singh <g.singh@nxp.com>
To: dev@dpdk.org, ferruh.yigit@intel.com
Cc: pankaj.chauhan@nxp.com, Gagandeep Singh <g.singh@nxp.com>
Subject: [PATCH v4 3/4] net/enetc: support packet parse type
Date: Fri, 28 Sep 2018 13:16:00 +0530	[thread overview]
Message-ID: <20180928074601.4287-4-g.singh@nxp.com> (raw)
In-Reply-To: <20180928074601.4287-1-g.singh@nxp.com>

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
---
 drivers/net/enetc/enetc_ethdev.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/net/enetc/enetc_ethdev.c b/drivers/net/enetc/enetc_ethdev.c
index 2d90d8fd5..8f4da8533 100644
--- a/drivers/net/enetc/enetc_ethdev.c
+++ b/drivers/net/enetc/enetc_ethdev.c
@@ -28,6 +28,7 @@ static int enetc_tx_queue_setup(struct rte_eth_dev *dev, uint16_t tx_queue_id,
 		uint16_t nb_tx_desc, unsigned int socket_id,
 		const struct rte_eth_txconf *tx_conf);
 static void enetc_tx_queue_release(void *txq);
+static const uint32_t *enetc_supported_ptypes_get(struct rte_eth_dev *dev);
 
 /*
  * The set of PCI devices this driver supports
@@ -50,6 +51,7 @@ static const struct eth_dev_ops enetc_ops = {
 	.rx_queue_release     = enetc_rx_queue_release,
 	.tx_queue_setup       = enetc_tx_queue_setup,
 	.tx_queue_release     = enetc_tx_queue_release,
+	.dev_supported_ptypes_get = enetc_supported_ptypes_get,
 };
 
 /**
@@ -165,6 +167,23 @@ enetc_dev_close(struct rte_eth_dev *dev __rte_unused)
 	PMD_INIT_FUNC_TRACE();
 }
 
+static const uint32_t *
+enetc_supported_ptypes_get(struct rte_eth_dev *dev __rte_unused)
+{
+	static const uint32_t ptypes[] = {
+		RTE_PTYPE_L2_ETHER,
+		RTE_PTYPE_L3_IPV4,
+		RTE_PTYPE_L3_IPV6,
+		RTE_PTYPE_L4_TCP,
+		RTE_PTYPE_L4_UDP,
+		RTE_PTYPE_L4_SCTP,
+		RTE_PTYPE_L4_ICMP,
+		RTE_PTYPE_UNKNOWN
+	};
+
+	return ptypes;
+}
+
 /* return 0 means link status changed, -1 means not changed */
 static int
 enetc_link_update(struct rte_eth_dev *dev, int wait_to_complete __rte_unused)
-- 
2.17.1

  parent reply	other threads:[~2018-09-28  7:46 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-06  5:54 [PATCH 0/3] introduces the ENETC PMD Gagandeep Singh
2018-09-06  5:54 ` [PATCH 1/3] doc: add usage doc for " Gagandeep Singh
2018-09-06  5:54 ` [PATCH 2/3] net/enetc: add ENETC PMD with basic operations Gagandeep Singh
2018-09-19 12:15   ` Shreyansh Jain
2018-09-06  5:54 ` [PATCH 3/3] net/enetc: enable Rx and Tx Gagandeep Singh
2018-09-13  9:41 ` [PATCH v2 0/3] introduces the enetc PMD driver Gagandeep Singh
2018-09-13  9:41   ` [PATCH v2 1/3] doc: add usage doc for ENETC PMD Gagandeep Singh
2018-09-21 13:22     ` Ferruh Yigit
2018-09-13  9:42   ` [PATCH v2 2/3] net/enetc: add ENETC PMD with basic operations Gagandeep Singh
2018-09-21 13:27     ` Ferruh Yigit
2018-09-13  9:42   ` [PATCH v2 3/3] net/enetc: enable Rx and Tx Gagandeep Singh
2018-09-19 12:26     ` Shreyansh Jain
2018-09-21 13:28     ` Ferruh Yigit
2018-09-28  5:16   ` [PATCH v3 0/3] introduces the enetc PMD driver Gagandeep Singh
2018-09-28  5:16     ` [PATCH v3 1/3] net/enetc: enable Rx and Tx Gagandeep Singh
2018-09-28  5:16     ` [PATCH v3 2/3] net/enetc: support packet parse type Gagandeep Singh
2018-09-28  5:16     ` [PATCH v3 3/3] doc: add usage doc for ENETC PMD Gagandeep Singh
2018-09-28  5:26     ` [PATCH v3 0/3] introduces the enetc PMD driver Gagandeep Singh
2018-09-28  7:45     ` [PATCH v4 0/4] " Gagandeep Singh
2018-09-28  7:45       ` [PATCH v4 1/4] net/enetc: add ENETC PMD with basic operations Gagandeep Singh
2018-10-01 15:58         ` Ferruh Yigit
2018-09-28  7:45       ` [PATCH v4 2/4] net/enetc: enable Rx and Tx Gagandeep Singh
2018-10-01 15:59         ` Ferruh Yigit
2018-09-28  7:46       ` Gagandeep Singh [this message]
2018-09-28 10:17         ` [PATCH v4 3/4] net/enetc: support packet parse type Shreyansh Jain
2018-10-01 15:59           ` Ferruh Yigit
2018-09-28  7:46       ` [PATCH v4 4/4] doc: add usage doc for ENETC PMD Gagandeep Singh
2018-10-01 16:00         ` Ferruh Yigit
2018-09-28 10:36       ` [PATCH v4 0/4] introduces the enetc PMD driver Shreyansh Jain
2018-10-03 13:36       ` [PATCH v5 " Gagandeep Singh
2018-10-03 13:36         ` [PATCH v5 1/4] net/enetc: add ENETC PMD with basic operations Gagandeep Singh
2018-10-03 19:47           ` Ferruh Yigit
2018-10-03 13:36         ` [PATCH v5 2/4] net/enetc: enable Rx and Tx Gagandeep Singh
2018-10-03 13:36         ` [PATCH v5 3/4] net/enetc: support packet parse type Gagandeep Singh
2018-10-03 13:36         ` [PATCH v5 4/4] doc: add usage doc for ENETC PMD Gagandeep Singh
2018-10-03 19:47           ` Ferruh Yigit
2018-10-03 19:48         ` [PATCH v5 0/4] introduces the enetc PMD driver Ferruh Yigit
2018-11-21 17:36           ` Ferruh Yigit
2018-11-22 10:34             ` Shreyansh Jain
2018-11-22 12:08               ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180928074601.4287-4-g.singh@nxp.com \
    --to=g.singh@nxp.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=pankaj.chauhan@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.