[PATCH v2 net-next 0/8] Continue towards using linkmode in phylib

[PATCH v2 net-next 0/8] Continue towards using linkmode in phylib

[Andrew Lunn]

These patches contain some further cleanup and helpers, and the first
real patch towards using linkmode bitmaps in phylink.

The macro magic in the RFC version has been replaced with run time
initialisation.

Andrew Lunn (8):
  net: phy: Move linkmode helpers to somewhere public
  net: phy: Add phydev_warn()
  net: phy: Add phydev_info()
  net: phy: Add helper to convert MII ADV register to a linkmode
  net: phy: Add helper for advertise to lcl value
  net: phy: Add limkmode equivalents to some of the MII ethtool helpers
  net: ethernet: xgbe: expand PHY_GBIT_FEAUTRES
  net: phy: Replace phy driver features u32 with link_mode bitmap

 drivers/net/dsa/mt7530.c                      |   6 +-
 drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c   |  15 +-
 drivers/net/ethernet/freescale/fman/mac.c     |   6 +-
 drivers/net/ethernet/freescale/gianfar.c      |   7 +-
 .../hisilicon/hns3/hns3pf/hclge_main.c        |   6 +-
 drivers/net/ethernet/marvell/pxa168_eth.c     |   4 +-
 drivers/net/ethernet/mediatek/mtk_eth_soc.c   |   6 +-
 drivers/net/ethernet/socionext/sni_ave.c      |   5 +-
 drivers/net/phy/aquantia.c                    |  12 +-
 drivers/net/phy/at803x.c                      |   2 +-
 drivers/net/phy/bcm63xx.c                     |   9 +-
 drivers/net/phy/dp83640.c                     |  18 +-
 drivers/net/phy/marvell.c                     |   4 +-
 drivers/net/phy/marvell10g.c                  |  17 +-
 drivers/net/phy/microchip.c                   |  33 ++--
 drivers/net/phy/microchip_t1.c                |   2 +-
 drivers/net/phy/phy_device.c                  | 168 +++++++++++++++++-
 drivers/net/phy/phylink.c                     |  27 ---
 include/linux/linkmode.h                      |  76 ++++++++
 include/linux/mii.h                           | 101 +++++++++++
 include/linux/phy.h                           |  31 +++-
 21 files changed, 420 insertions(+), 135 deletions(-)
 create mode 100644 include/linux/linkmode.h

-- 
2.19.0.rc1

[PATCH v2 net-next 1/8] net: phy: Move linkmode helpers to somewhere public

[Andrew Lunn]

phylink has some useful helpers to working with linkmode bitmaps.
Move them to there own header so other code can use them.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
v2: It was suggested to make include/linux/ethernet-phy and move
some of the header files into it. I decided to leave this until
later.
---
 drivers/net/phy/phylink.c | 27 ----------------
 include/linux/linkmode.h  | 67 +++++++++++++++++++++++++++++++++++++++
 include/linux/mii.h       |  1 +
 include/linux/phy.h       |  1 +
 4 files changed, 69 insertions(+), 27 deletions(-)
 create mode 100644 include/linux/linkmode.h

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 1d01e0c625a5..b6993af5c9e4 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -68,33 +68,6 @@ struct phylink {
 	struct sfp_bus *sfp_bus;
 };
 
-static inline void linkmode_zero(unsigned long *dst)
-{
-	bitmap_zero(dst, __ETHTOOL_LINK_MODE_MASK_NBITS);
-}
-
-static inline void linkmode_copy(unsigned long *dst, const unsigned long *src)
-{
-	bitmap_copy(dst, src, __ETHTOOL_LINK_MODE_MASK_NBITS);
-}
-
-static inline void linkmode_and(unsigned long *dst, const unsigned long *a,
-				const unsigned long *b)
-{
-	bitmap_and(dst, a, b, __ETHTOOL_LINK_MODE_MASK_NBITS);
-}
-
-static inline void linkmode_or(unsigned long *dst, const unsigned long *a,
-				const unsigned long *b)
-{
-	bitmap_or(dst, a, b, __ETHTOOL_LINK_MODE_MASK_NBITS);
-}
-
-static inline bool linkmode_empty(const unsigned long *src)
-{
-	return bitmap_empty(src, __ETHTOOL_LINK_MODE_MASK_NBITS);
-}
-
 /**
  * phylink_set_port_modes() - set the port type modes in the ethtool mask
  * @mask: ethtool link mode mask
diff --git a/include/linux/linkmode.h b/include/linux/linkmode.h
new file mode 100644
index 000000000000..014fb86c7114
--- /dev/null
+++ b/include/linux/linkmode.h
@@ -0,0 +1,67 @@
+#ifndef __LINKMODE_H
+#define __LINKMODE_H
+
+#include <linux/bitmap.h>
+#include <linux/ethtool.h>
+#include <uapi/linux/ethtool.h>
+
+static inline void linkmode_zero(unsigned long *dst)
+{
+	bitmap_zero(dst, __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static inline void linkmode_copy(unsigned long *dst, const unsigned long *src)
+{
+	bitmap_copy(dst, src, __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static inline void linkmode_and(unsigned long *dst, const unsigned long *a,
+				const unsigned long *b)
+{
+	bitmap_and(dst, a, b, __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static inline void linkmode_or(unsigned long *dst, const unsigned long *a,
+				const unsigned long *b)
+{
+	bitmap_or(dst, a, b, __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static inline bool linkmode_empty(const unsigned long *src)
+{
+	return bitmap_empty(src, __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static inline int linkmode_andnot(unsigned long *dst, const unsigned long *src1,
+				  const unsigned long *src2)
+{
+	return bitmap_andnot(dst, src1, src2,  __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static inline void linkmode_set_bit(int nr, volatile unsigned long *addr)
+{
+	__set_bit(nr, addr);
+}
+
+static inline void linkmode_clear_bit(int nr, volatile unsigned long *addr)
+{
+	__clear_bit(nr, addr);
+}
+
+static inline void linkmode_change_bit(int nr, volatile unsigned long *addr)
+{
+	__change_bit(nr, addr);
+}
+
+static inline int linkmode_test_bit(int nr, volatile unsigned long *addr)
+{
+	return test_bit(nr, addr);
+}
+
+static inline int linkmode_equal(const unsigned long *src1,
+				 const unsigned long *src2)
+{
+	return bitmap_equal(src1, src2, __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+#endif /* __LINKMODE_H */
diff --git a/include/linux/mii.h b/include/linux/mii.h
index 55000ee5c6ad..567047ef0309 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -10,6 +10,7 @@
 
 
 #include <linux/if.h>
+#include <linux/linkmode.h>
 #include <uapi/linux/mii.h>
 
 struct ethtool_cmd;
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 192a1fa0c73b..d24cc46748e2 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -19,6 +19,7 @@
 #include <linux/compiler.h>
 #include <linux/spinlock.h>
 #include <linux/ethtool.h>
+#include <linux/linkmode.h>
 #include <linux/mdio.h>
 #include <linux/mii.h>
 #include <linux/module.h>
-- 
2.19.0.rc1

[PATCH v2 net-next 2/8] net: phy: Add phydev_warn()

[Andrew Lunn]

Not all new style LINK_MODE bits can be converted into old style
SUPPORTED bits. We need to warn when such a conversion is attempted.
Add a helper for this.

Convert all pr_warn() calls to phydev_warn() where possible.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
v2:
Make use of the new call.
---
 drivers/net/phy/at803x.c     |  2 +-
 drivers/net/phy/dp83640.c    |  7 ++++---
 drivers/net/phy/marvell.c    |  2 +-
 drivers/net/phy/marvell10g.c |  6 +++---
 drivers/net/phy/microchip.c  | 33 +++++++++++++++++----------------
 include/linux/phy.h          |  3 +++
 6 files changed, 29 insertions(+), 24 deletions(-)

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 411cf1072bae..e74a047a846e 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -357,7 +357,7 @@ static int at803x_aneg_done(struct phy_device *phydev)
 
 	/* check if the SGMII link is OK. */
 	if (!(phy_read(phydev, AT803X_PSSR) & AT803X_PSSR_MR_AN_COMPLETE)) {
-		pr_warn("803x_aneg_done: SGMII link is not ok\n");
+		phydev_warn(phydev, "803x_aneg_done: SGMII link is not ok\n");
 		aneg_done = 0;
 	}
 	/* switch back to copper page */
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 29aa8d772b0c..74cf356d8171 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -553,16 +553,17 @@ static void enable_status_frames(struct phy_device *phydev, bool on)
 	mutex_unlock(&clock->extreg_lock);
 
 	if (!phydev->attached_dev) {
-		pr_warn("expected to find an attached netdevice\n");
+		phydev_warn(phydev,
+			    "expected to find an attached netdevice\n");
 		return;
 	}
 
 	if (on) {
 		if (dev_mc_add(phydev->attached_dev, status_frame_dst))
-			pr_warn("failed to add mc address\n");
+			phydev_warn(phydev, "failed to add mc address\n");
 	} else {
 		if (dev_mc_del(phydev->attached_dev, status_frame_dst))
-			pr_warn("failed to delete mc address\n");
+			phydev_warn(phydev, "failed to delete mc address\n");
 	}
 }
 
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 24fc4a73c300..8872a430d74a 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -638,7 +638,7 @@ static void marvell_config_led(struct phy_device *phydev)
 	err = phy_write_paged(phydev, MII_MARVELL_LED_PAGE, MII_PHY_LED_CTRL,
 			      def_config);
 	if (err < 0)
-		pr_warn("Fail to config marvell phy LED.\n");
+		phydev_warn(phydev, "Fail to config marvell phy LED.\n");
 }
 
 static int marvell_config_init(struct phy_device *phydev)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index f77a2d9e7f9d..f214834819dd 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -337,9 +337,9 @@ static int mv3310_config_init(struct phy_device *phydev)
 	}
 
 	if (!ethtool_convert_link_mode_to_legacy_u32(&mask, supported))
-		dev_warn(&phydev->mdio.dev,
-			 "PHY supports (%*pb) more modes than phylib supports, some modes not supported.\n",
-			 __ETHTOOL_LINK_MODE_MASK_NBITS, supported);
+		phydev_warn(phydev,
+			    "PHY supports (%*pb) more modes than phylib supports, some modes not supported.\n",
+			    __ETHTOOL_LINK_MODE_MASK_NBITS, supported);
 
 	phydev->supported &= mask;
 	phydev->advertising &= phydev->supported;
diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c
index 2d67937866a3..04b12e34da58 100644
--- a/drivers/net/phy/microchip.c
+++ b/drivers/net/phy/microchip.c
@@ -88,7 +88,7 @@ static int lan88xx_TR_reg_set(struct phy_device *phydev, u16 regaddr,
 	/* Save current page */
 	save_page = phy_save_page(phydev);
 	if (save_page < 0) {
-		pr_warn("Failed to get current page\n");
+		phydev_warn(phydev, "Failed to get current page\n");
 		goto err;
 	}
 
@@ -98,14 +98,14 @@ static int lan88xx_TR_reg_set(struct phy_device *phydev, u16 regaddr,
 	ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_LOW_DATA,
 			  (data & 0xFFFF));
 	if (ret < 0) {
-		pr_warn("Failed to write TR low data\n");
+		phydev_warn(phydev, "Failed to write TR low data\n");
 		goto err;
 	}
 
 	ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_HIGH_DATA,
 			  (data & 0x00FF0000) >> 16);
 	if (ret < 0) {
-		pr_warn("Failed to write TR high data\n");
+		phydev_warn(phydev, "Failed to write TR high data\n");
 		goto err;
 	}
 
@@ -115,14 +115,15 @@ static int lan88xx_TR_reg_set(struct phy_device *phydev, u16 regaddr,
 
 	ret = __phy_write(phydev, LAN88XX_EXT_PAGE_TR_CR, buf);
 	if (ret < 0) {
-		pr_warn("Failed to write data in reg\n");
+		phydev_warn(phydev, "Failed to write data in reg\n");
 		goto err;
 	}
 
 	usleep_range(1000, 2000);/* Wait for Data to be written */
 	val = __phy_read(phydev, LAN88XX_EXT_PAGE_TR_CR);
 	if (!(val & 0x8000))
-		pr_warn("TR Register[0x%X] configuration failed\n", regaddr);
+		phydev_warn(phydev, "TR Register[0x%X] configuration failed\n",
+			    regaddr);
 err:
 	return phy_restore_page(phydev, save_page, ret);
 }
@@ -137,7 +138,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x0F82, 0x12B00A);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x0F82]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x0F82]\n");
 
 	/* Get access to Channel b'10, Node b'1101, Register 0x06.
 	 * Write 24-bit value 0xD2C46F to register. Setting SSTrKf1000Slv,
@@ -145,7 +146,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x168C, 0xD2C46F);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x168C]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x168C]\n");
 
 	/* Get access to Channel b'10, Node b'1111, Register 0x11.
 	 * Write 24-bit value 0x620 to register. Setting rem_upd_done_thresh
@@ -153,7 +154,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x17A2, 0x620);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x17A2]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x17A2]\n");
 
 	/* Get access to Channel b'10, Node b'1101, Register 0x10.
 	 * Write 24-bit value 0xEEFFDD to register. Setting
@@ -162,7 +163,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x16A0, 0xEEFFDD);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x16A0]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x16A0]\n");
 
 	/* Get access to Channel b'10, Node b'1101, Register 0x13.
 	 * Write 24-bit value 0x071448 to register. Setting
@@ -170,7 +171,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x16A6, 0x071448);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x16A6]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x16A6]\n");
 
 	/* Get access to Channel b'10, Node b'1101, Register 0x12.
 	 * Write 24-bit value 0x13132F to register. Setting
@@ -178,7 +179,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x16A4, 0x13132F);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x16A4]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x16A4]\n");
 
 	/* Get access to Channel b'10, Node b'1101, Register 0x14.
 	 * Write 24-bit value 0x0 to register. Setting eee_3level_delay,
@@ -186,7 +187,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x16A8, 0x0);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x16A8]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x16A8]\n");
 
 	/* Get access to Channel b'01, Node b'1111, Register 0x34.
 	 * Write 24-bit value 0x91B06C to register. Setting
@@ -195,7 +196,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x0FE8, 0x91B06C);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x0FE8]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x0FE8]\n");
 
 	/* Get access to Channel b'01, Node b'1111, Register 0x3E.
 	 * Write 24-bit value 0xC0A028 to register. Setting
@@ -204,7 +205,7 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x0FFC, 0xC0A028);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x0FFC]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x0FFC]\n");
 
 	/* Get access to Channel b'01, Node b'1111, Register 0x35.
 	 * Write 24-bit value 0x041600 to register. Setting
@@ -213,14 +214,14 @@ static void lan88xx_config_TR_regs(struct phy_device *phydev)
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x0FEA, 0x041600);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x0FEA]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x0FEA]\n");
 
 	/* Get access to Channel b'10, Node b'1101, Register 0x03.
 	 * Write 24-bit value 0x000004 to register. Setting TrFreeze bits.
 	 */
 	err = lan88xx_TR_reg_set(phydev, 0x1686, 0x000004);
 	if (err < 0)
-		pr_warn("Failed to Set Register[0x1686]\n");
+		phydev_warn(phydev, "Failed to Set Register[0x1686]\n");
 }
 
 static int lan88xx_probe(struct phy_device *phydev)
diff --git a/include/linux/phy.h b/include/linux/phy.h
index d24cc46748e2..0ab9f89773fd 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -968,6 +968,9 @@ static inline void phy_device_reset(struct phy_device *phydev, int value)
 #define phydev_err(_phydev, format, args...)	\
 	dev_err(&_phydev->mdio.dev, format, ##args)
 
+#define phydev_warn(_phydev, format, args...)	\
+	dev_warn(&_phydev->mdio.dev, format, ##args)
+
 #define phydev_dbg(_phydev, format, args...)	\
 	dev_dbg(&_phydev->mdio.dev, format, ##args)
 
-- 
2.19.0.rc1

[PATCH v2 net-next 3/8] net: phy: Add phydev_info()

[Andrew Lunn]

Add phydev_info() and make use of it within the phy drivers and core
code.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/phy/dp83640.c    | 11 ++++++-----
 drivers/net/phy/phy_device.c |  4 ++--
 include/linux/phy.h          |  3 +++
 3 files changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 74cf356d8171..edd4d44a386d 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -687,9 +687,9 @@ static void recalibrate(struct dp83640_clock *clock)
 	 * read out and correct offsets
 	 */
 	val = ext_read(master, PAGE4, PTP_STS);
-	pr_info("master PTP_STS  0x%04hx\n", val);
+	phydev_info(master, "master PTP_STS  0x%04hx\n", val);
 	val = ext_read(master, PAGE4, PTP_ESTS);
-	pr_info("master PTP_ESTS 0x%04hx\n", val);
+	phydev_info(master, "master PTP_ESTS 0x%04hx\n", val);
 	event_ts.ns_lo  = ext_read(master, PAGE4, PTP_EDATA);
 	event_ts.ns_hi  = ext_read(master, PAGE4, PTP_EDATA);
 	event_ts.sec_lo = ext_read(master, PAGE4, PTP_EDATA);
@@ -699,15 +699,16 @@ static void recalibrate(struct dp83640_clock *clock)
 	list_for_each(this, &clock->phylist) {
 		tmp = list_entry(this, struct dp83640_private, list);
 		val = ext_read(tmp->phydev, PAGE4, PTP_STS);
-		pr_info("slave  PTP_STS  0x%04hx\n", val);
+		phydev_info(tmp->phydev, "slave  PTP_STS  0x%04hx\n", val);
 		val = ext_read(tmp->phydev, PAGE4, PTP_ESTS);
-		pr_info("slave  PTP_ESTS 0x%04hx\n", val);
+		phydev_info(tmp->phydev, "slave  PTP_ESTS 0x%04hx\n", val);
 		event_ts.ns_lo  = ext_read(tmp->phydev, PAGE4, PTP_EDATA);
 		event_ts.ns_hi  = ext_read(tmp->phydev, PAGE4, PTP_EDATA);
 		event_ts.sec_lo = ext_read(tmp->phydev, PAGE4, PTP_EDATA);
 		event_ts.sec_hi = ext_read(tmp->phydev, PAGE4, PTP_EDATA);
 		diff = now - (s64) phy2txts(&event_ts);
-		pr_info("slave offset %lld nanoseconds\n", diff);
+		phydev_info(tmp->phydev, "slave offset %lld nanoseconds\n",
+			    diff);
 		diff += ADJTIME_FIX;
 		ts = ns_to_timespec64(diff);
 		tdr_write(0, tmp->phydev, &ts, PTP_STEP_CLK);
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index ee676d75fe02..35102e17bbeb 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -920,13 +920,13 @@ void phy_attached_print(struct phy_device *phydev, const char *fmt, ...)
 
 
 	if (!fmt) {
-		dev_info(&phydev->mdio.dev, ATTACHED_FMT "\n",
+		phydev_info(phydev, ATTACHED_FMT "\n",
 			 drv_name, phydev_name(phydev),
 			 irq_str);
 	} else {
 		va_list ap;
 
-		dev_info(&phydev->mdio.dev, ATTACHED_FMT,
+		phydev_info(phydev, ATTACHED_FMT,
 			 drv_name, phydev_name(phydev),
 			 irq_str);
 
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 0ab9f89773fd..0f6e7bf5e9c5 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -968,6 +968,9 @@ static inline void phy_device_reset(struct phy_device *phydev, int value)
 #define phydev_err(_phydev, format, args...)	\
 	dev_err(&_phydev->mdio.dev, format, ##args)
 
+#define phydev_info(_phydev, format, args...)	\
+	dev_info(&_phydev->mdio.dev, format, ##args)
+
 #define phydev_warn(_phydev, format, args...)	\
 	dev_warn(&_phydev->mdio.dev, format, ##args)
 
-- 
2.19.0.rc1

[PATCH v2 net-next 4/8] net: phy: Add helper to convert MII ADV register to a linkmode

[Andrew Lunn]

The phy_mii_ioctl can be used to write a value into the MII_ADVERTISE
register in the PHY. Since this changes the state of the PHY, we need
to make the same change to phydev->advertising. Add a helper which can
convert the register value to a linkmode.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
 include/linux/mii.h | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/include/linux/mii.h b/include/linux/mii.h
index 567047ef0309..8c7da9473ad9 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -303,6 +303,37 @@ static inline u32 mii_lpa_to_ethtool_lpa_x(u32 lpa)
 	return result | mii_adv_to_ethtool_adv_x(lpa);
 }
 
+/**
+ * mii_adv_to_linkmode_adv_t
+ * @advertising:pointer to destination link mode.
+ * @adv: value of the MII_ADVERTISE register
+ *
+ * A small helper function that translates MII_ADVERTISE bits
+ * to linkmode advertisement settings.
+ */
+static inline void mii_adv_to_linkmode_adv_t(unsigned long *advertising,
+					     u32 adv)
+{
+	linkmode_zero(advertising);
+
+	if (adv & ADVERTISE_10HALF)
+		linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT,
+				 advertising);
+	if (adv & ADVERTISE_10FULL)
+		linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
+				 advertising);
+	if (adv & ADVERTISE_100HALF)
+		linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT,
+				 advertising);
+	if (adv & ADVERTISE_100FULL)
+		linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+				 advertising);
+	if (adv & ADVERTISE_PAUSE_CAP)
+		linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, advertising);
+	if (adv & ADVERTISE_PAUSE_ASYM)
+		linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, advertising);
+}
+
 /**
  * mii_advertise_flowctrl - get flow control advertisement flags
  * @cap: Flow control capabilities (FLOW_CTRL_RX, FLOW_CTRL_TX or both)
-- 
2.19.0.rc1

[PATCH v2 net-next 5/8] net: phy: Add helper for advertise to lcl value

[Andrew Lunn]

Add a helper to convert the local advertising to an LCL capabilities,
which is then used to resolve pause flow control settings.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
 drivers/net/dsa/mt7530.c                      |  6 +-----
 drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c   |  5 +----
 drivers/net/ethernet/freescale/fman/mac.c     |  6 +-----
 drivers/net/ethernet/freescale/gianfar.c      |  7 +------
 .../hisilicon/hns3/hns3pf/hclge_main.c        |  6 +-----
 drivers/net/ethernet/mediatek/mtk_eth_soc.c   |  6 +-----
 drivers/net/ethernet/socionext/sni_ave.c      |  5 +----
 include/linux/mii.h                           | 19 +++++++++++++++++++
 8 files changed, 26 insertions(+), 34 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 62e486652e62..a5de9bffe5be 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -658,11 +658,7 @@ static void mt7530_adjust_link(struct dsa_switch *ds, int port,
 			if (phydev->asym_pause)
 				rmt_adv |= LPA_PAUSE_ASYM;
 
-			if (phydev->advertising & ADVERTISED_Pause)
-				lcl_adv |= ADVERTISE_PAUSE_CAP;
-			if (phydev->advertising & ADVERTISED_Asym_Pause)
-				lcl_adv |= ADVERTISE_PAUSE_ASYM;
-
+			lcl_adv = ethtool_adv_to_lcl_adv_t(phydev->advertising);
 			flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv);
 
 			if (flowctrl & FLOW_CTRL_TX)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index 289129011b9f..a7e03e3ecc93 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -1495,10 +1495,7 @@ static void xgbe_phy_phydev_flowctrl(struct xgbe_prv_data *pdata)
 	if (!phy_data->phydev)
 		return;
 
-	if (phy_data->phydev->advertising & ADVERTISED_Pause)
-		lcl_adv |= ADVERTISE_PAUSE_CAP;
-	if (phy_data->phydev->advertising & ADVERTISED_Asym_Pause)
-		lcl_adv |= ADVERTISE_PAUSE_ASYM;
+	lcl_adv = ethtool_adv_to_lcl_adv_t(phy_data->phydev->advertising);
 
 	if (phy_data->phydev->pause) {
 		XGBE_SET_LP_ADV(lks, Pause);
diff --git a/drivers/net/ethernet/freescale/fman/mac.c b/drivers/net/ethernet/freescale/fman/mac.c
index a847b9c3b31a..d79e4e009d63 100644
--- a/drivers/net/ethernet/freescale/fman/mac.c
+++ b/drivers/net/ethernet/freescale/fman/mac.c
@@ -393,11 +393,7 @@ void fman_get_pause_cfg(struct mac_device *mac_dev, bool *rx_pause,
 	 */
 
 	/* get local capabilities */
-	lcl_adv = 0;
-	if (phy_dev->advertising & ADVERTISED_Pause)
-		lcl_adv |= ADVERTISE_PAUSE_CAP;
-	if (phy_dev->advertising & ADVERTISED_Asym_Pause)
-		lcl_adv |= ADVERTISE_PAUSE_ASYM;
+	lcl_adv = ethtool_adv_to_lcl_adv_t(phy_dev->advertising);
 
 	/* get link partner capabilities */
 	rmt_adv = 0;
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 0bd21a493016..3c8da1a18ba0 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -3656,12 +3656,7 @@ static u32 gfar_get_flowctrl_cfg(struct gfar_private *priv)
 		if (phydev->asym_pause)
 			rmt_adv |= LPA_PAUSE_ASYM;
 
-		lcl_adv = 0;
-		if (phydev->advertising & ADVERTISED_Pause)
-			lcl_adv |= ADVERTISE_PAUSE_CAP;
-		if (phydev->advertising & ADVERTISED_Asym_Pause)
-			lcl_adv |= ADVERTISE_PAUSE_ASYM;
-
+		lcl_adv = ethtool_adv_to_lcl_adv_t(phydev->advertising);
 		flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv);
 		if (flowctrl & FLOW_CTRL_TX)
 			val |= MACCFG1_TX_FLOW;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 7c8b686b1ce1..c17ceeefa453 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -5006,11 +5006,7 @@ int hclge_cfg_flowctrl(struct hclge_dev *hdev)
 	if (!phydev->link || !phydev->autoneg)
 		return 0;
 
-	if (phydev->advertising & ADVERTISED_Pause)
-		local_advertising = ADVERTISE_PAUSE_CAP;
-
-	if (phydev->advertising & ADVERTISED_Asym_Pause)
-		local_advertising |= ADVERTISE_PAUSE_ASYM;
+	local_advertising = ethtool_adv_to_lcl_adv_t(phydev->advertising);
 
 	if (phydev->pause)
 		remote_advertising = LPA_PAUSE_CAP;
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index cc1e9a96a43b..7dbfdac4067a 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -243,11 +243,7 @@ static void mtk_phy_link_adjust(struct net_device *dev)
 		if (dev->phydev->asym_pause)
 			rmt_adv |= LPA_PAUSE_ASYM;
 
-		if (dev->phydev->advertising & ADVERTISED_Pause)
-			lcl_adv |= ADVERTISE_PAUSE_CAP;
-		if (dev->phydev->advertising & ADVERTISED_Asym_Pause)
-			lcl_adv |= ADVERTISE_PAUSE_ASYM;
-
+		lcl_adv = ethtool_adv_to_lcl_adv_t(dev->phydev->advertising);
 		flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv);
 
 		if (flowctrl & FLOW_CTRL_TX)
diff --git a/drivers/net/ethernet/socionext/sni_ave.c b/drivers/net/ethernet/socionext/sni_ave.c
index 2a156dcd4534..6732f5cbde08 100644
--- a/drivers/net/ethernet/socionext/sni_ave.c
+++ b/drivers/net/ethernet/socionext/sni_ave.c
@@ -1116,11 +1116,8 @@ static void ave_phy_adjust_link(struct net_device *ndev)
 			rmt_adv |= LPA_PAUSE_CAP;
 		if (phydev->asym_pause)
 			rmt_adv |= LPA_PAUSE_ASYM;
-		if (phydev->advertising & ADVERTISED_Pause)
-			lcl_adv |= ADVERTISE_PAUSE_CAP;
-		if (phydev->advertising & ADVERTISED_Asym_Pause)
-			lcl_adv |= ADVERTISE_PAUSE_ASYM;
 
+		lcl_adv = ethtool_adv_to_lcl_adv_t(phydev->advertising);
 		cap = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv);
 		if (cap & FLOW_CTRL_TX)
 			txcr |= AVE_TXCR_FLOCTR;
diff --git a/include/linux/mii.h b/include/linux/mii.h
index 8c7da9473ad9..9ed49c8261d0 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -334,6 +334,25 @@ static inline void mii_adv_to_linkmode_adv_t(unsigned long *advertising,
 		linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, advertising);
 }
 
+/**
+ * ethtool_adv_to_lcl_adv_t
+ * @advertising:pointer to ethtool advertising
+ *
+ * A small helper function that translates ethtool advertising to LVL
+ * pause capabilities.
+ */
+static inline u32 ethtool_adv_to_lcl_adv_t(u32 advertising)
+{
+	u32 lcl_adv = 0;
+
+	if (advertising & ADVERTISED_Pause)
+		lcl_adv |= ADVERTISE_PAUSE_CAP;
+	if (advertising & ADVERTISED_Asym_Pause)
+		lcl_adv |= ADVERTISE_PAUSE_ASYM;
+
+	return lcl_adv;
+}
+
 /**
  * mii_advertise_flowctrl - get flow control advertisement flags
  * @cap: Flow control capabilities (FLOW_CTRL_RX, FLOW_CTRL_TX or both)
-- 
2.19.0.rc1

[PATCH v2 net-next 6/8] net: phy: Add limkmode equivalents to some of the MII ethtool helpers

[Andrew Lunn]

Add helpers which take a linkmode rather than a u32 ethtool for
advertising settings.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
 include/linux/mii.h | 50 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

diff --git a/include/linux/mii.h b/include/linux/mii.h
index 9ed49c8261d0..2da85b02e1c0 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -132,6 +132,34 @@ static inline u32 ethtool_adv_to_mii_adv_t(u32 ethadv)
 	return result;
 }
 
+/**
+ * linkmode_adv_to_mii_adv_t
+ * @advertising: the linkmode advertisement settings
+ *
+ * A small helper function that translates linkmode advertisement
+ * settings to phy autonegotiation advertisements for the
+ * MII_ADVERTISE register.
+ */
+static inline u32 linkmode_adv_to_mii_adv_t(unsigned long *advertising)
+{
+	u32 result = 0;
+
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, advertising))
+		result |= ADVERTISE_10HALF;
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, advertising))
+		result |= ADVERTISE_10FULL;
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, advertising))
+		result |= ADVERTISE_100HALF;
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, advertising))
+		result |= ADVERTISE_100FULL;
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Pause_BIT, advertising))
+		result |= ADVERTISE_PAUSE_CAP;
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, advertising))
+		result |= ADVERTISE_PAUSE_ASYM;
+
+	return result;
+}
+
 /**
  * mii_adv_to_ethtool_adv_t
  * @adv: value of the MII_ADVERTISE register
@@ -179,6 +207,28 @@ static inline u32 ethtool_adv_to_mii_ctrl1000_t(u32 ethadv)
 	return result;
 }
 
+/**
+ * linkmode_adv_to_mii_ctrl1000_t
+ * advertising: the linkmode advertisement settings
+ *
+ * A small helper function that translates linkmode advertisement
+ * settings to phy autonegotiation advertisements for the
+ * MII_CTRL1000 register when in 1000T mode.
+ */
+static inline u32 linkmode_adv_to_mii_ctrl1000_t(unsigned long *advertising)
+{
+	u32 result = 0;
+
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
+			      advertising))
+		result |= ADVERTISE_1000HALF;
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+			      advertising))
+		result |= ADVERTISE_1000FULL;
+
+	return result;
+}
+
 /**
  * mii_ctrl1000_to_ethtool_adv_t
  * @adv: value of the MII_CTRL1000 register
-- 
2.19.0.rc1

[PATCH v2 net-next 7/8] net: ethernet: xgbe: expand PHY_GBIT_FEAUTRES

[Andrew Lunn]

The macro PHY_GBIT_FEAUTRES needs to change into a bitmap in order to
support link_modes. Remove its use from xgde by replacing it with its
definition.

Probably, the current behavior is wrong. It probably should be
ANDing not assigning.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
v2
Remove unneeded ()
---
 drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index a7e03e3ecc93..151bdb629e8a 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -878,8 +878,9 @@ static bool xgbe_phy_finisar_phy_quirks(struct xgbe_prv_data *pdata)
 	phy_write(phy_data->phydev, 0x04, 0x0d01);
 	phy_write(phy_data->phydev, 0x00, 0x9140);
 
-	phy_data->phydev->supported = PHY_GBIT_FEATURES;
-	phy_data->phydev->advertising = phy_data->phydev->supported;
+	phy_data->phydev->supported = PHY_10BT_FEATURES |
+				      PHY_100BT_FEATURES |
+				      PHY_1000BT_FEATURES;
 	phy_support_asym_pause(phy_data->phydev);
 
 	netif_dbg(pdata, drv, pdata->netdev,
@@ -950,8 +951,9 @@ static bool xgbe_phy_belfuse_phy_quirks(struct xgbe_prv_data *pdata)
 	reg = phy_read(phy_data->phydev, 0x00);
 	phy_write(phy_data->phydev, 0x00, reg & ~0x00800);
 
-	phy_data->phydev->supported = PHY_GBIT_FEATURES;
-	phy_data->phydev->advertising = phy_data->phydev->supported;
+	phy_data->phydev->supported = (PHY_10BT_FEATURES |
+				       PHY_100BT_FEATURES |
+				       PHY_1000BT_FEATURES);
 	phy_support_asym_pause(phy_data->phydev);
 
 	netif_dbg(pdata, drv, pdata->netdev,
-- 
2.19.0.rc1

[PATCH v2 net-next 8/8] net: phy: Replace phy driver features u32 with link_mode bitmap

[Andrew Lunn]

This is one step in allowing phylib to make use of link_mode bitmaps,
instead of u32 for supported and advertised features. Convert the phy
drivers to use bitmaps to indicates the features they support.

Build bitmap equivalents of the u32 values at runtime, and have the
drivers point to the appropriate bitmap. These bitmaps are shared, and
we don't want a driver to modify them. So mark them __ro_after_init.

Within phylib, the features bitmap is currently turned back into a
u32. This will be removed once the whole of phylib, and the drivers
are converted to use bitmaps.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/ethernet/marvell/pxa168_eth.c |   4 +-
 drivers/net/phy/aquantia.c                |  12 +-
 drivers/net/phy/bcm63xx.c                 |   9 +-
 drivers/net/phy/marvell.c                 |   2 +-
 drivers/net/phy/marvell10g.c              |  11 +-
 drivers/net/phy/microchip_t1.c            |   2 +-
 drivers/net/phy/phy_device.c              | 164 +++++++++++++++++++++-
 include/linux/linkmode.h                  |   9 ++
 include/linux/phy.h                       |  24 ++--
 9 files changed, 198 insertions(+), 39 deletions(-)

diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c
index ff2fea0f8b75..0bd4351b2a49 100644
--- a/drivers/net/ethernet/marvell/pxa168_eth.c
+++ b/drivers/net/ethernet/marvell/pxa168_eth.c
@@ -988,8 +988,8 @@ static int pxa168_init_phy(struct net_device *dev)
 	cmd.base.phy_address = pep->phy_addr;
 	cmd.base.speed = pep->phy_speed;
 	cmd.base.duplex = pep->phy_duplex;
-	ethtool_convert_legacy_u32_to_link_mode(cmd.link_modes.advertising,
-						PHY_BASIC_FEATURES);
+	bitmap_copy(cmd.link_modes.advertising, PHY_BASIC_FEATURES,
+		    __ETHTOOL_LINK_MODE_MASK_NBITS);
 	cmd.base.autoneg = AUTONEG_ENABLE;
 
 	if (cmd.base.speed != 0)
diff --git a/drivers/net/phy/aquantia.c b/drivers/net/phy/aquantia.c
index 319edc9c8ec7..632472cab3bb 100644
--- a/drivers/net/phy/aquantia.c
+++ b/drivers/net/phy/aquantia.c
@@ -115,7 +115,7 @@ static struct phy_driver aquantia_driver[] = {
 	.phy_id		= PHY_ID_AQ1202,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Aquantia AQ1202",
-	.features	= PHY_AQUANTIA_FEATURES,
+	.features	= PHY_10GBIT_FULL_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT,
 	.aneg_done	= genphy_c45_aneg_done,
 	.config_aneg    = aquantia_config_aneg,
@@ -127,7 +127,7 @@ static struct phy_driver aquantia_driver[] = {
 	.phy_id		= PHY_ID_AQ2104,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Aquantia AQ2104",
-	.features	= PHY_AQUANTIA_FEATURES,
+	.features	= PHY_10GBIT_FULL_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT,
 	.aneg_done	= genphy_c45_aneg_done,
 	.config_aneg    = aquantia_config_aneg,
@@ -139,7 +139,7 @@ static struct phy_driver aquantia_driver[] = {
 	.phy_id		= PHY_ID_AQR105,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Aquantia AQR105",
-	.features	= PHY_AQUANTIA_FEATURES,
+	.features	= PHY_10GBIT_FULL_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT,
 	.aneg_done	= genphy_c45_aneg_done,
 	.config_aneg    = aquantia_config_aneg,
@@ -151,7 +151,7 @@ static struct phy_driver aquantia_driver[] = {
 	.phy_id		= PHY_ID_AQR106,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Aquantia AQR106",
-	.features	= PHY_AQUANTIA_FEATURES,
+	.features	= PHY_10GBIT_FULL_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT,
 	.aneg_done	= genphy_c45_aneg_done,
 	.config_aneg    = aquantia_config_aneg,
@@ -163,7 +163,7 @@ static struct phy_driver aquantia_driver[] = {
 	.phy_id		= PHY_ID_AQR107,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Aquantia AQR107",
-	.features	= PHY_AQUANTIA_FEATURES,
+	.features	= PHY_10GBIT_FULL_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT,
 	.aneg_done	= genphy_c45_aneg_done,
 	.config_aneg    = aquantia_config_aneg,
@@ -175,7 +175,7 @@ static struct phy_driver aquantia_driver[] = {
 	.phy_id		= PHY_ID_AQR405,
 	.phy_id_mask	= 0xfffffff0,
 	.name		= "Aquantia AQR405",
-	.features	= PHY_AQUANTIA_FEATURES,
+	.features	= PHY_10GBIT_FULL_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT,
 	.aneg_done	= genphy_c45_aneg_done,
 	.config_aneg    = aquantia_config_aneg,
diff --git a/drivers/net/phy/bcm63xx.c b/drivers/net/phy/bcm63xx.c
index cf14613745c9..d95bffdec4c1 100644
--- a/drivers/net/phy/bcm63xx.c
+++ b/drivers/net/phy/bcm63xx.c
@@ -42,6 +42,9 @@ static int bcm63xx_config_init(struct phy_device *phydev)
 {
 	int reg, err;
 
+	/* ASYM_PAUSE bit is marked RO in datasheet, so don't cheat */
+	phydev->supported |= SUPPORTED_Pause;
+
 	reg = phy_read(phydev, MII_BCM63XX_IR);
 	if (reg < 0)
 		return reg;
@@ -65,8 +68,7 @@ static struct phy_driver bcm63xx_driver[] = {
 	.phy_id		= 0x00406000,
 	.phy_id_mask	= 0xfffffc00,
 	.name		= "Broadcom BCM63XX (1)",
-	/* ASYM_PAUSE bit is marked RO in datasheet, so don't cheat */
-	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+	.features	= PHY_BASIC_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT | PHY_IS_INTERNAL,
 	.config_init	= bcm63xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
@@ -75,8 +77,7 @@ static struct phy_driver bcm63xx_driver[] = {
 	/* same phy as above, with just a different OUI */
 	.phy_id		= 0x002bdc00,
 	.phy_id_mask	= 0xfffffc00,
-	.name		= "Broadcom BCM63XX (2)",
-	.features	= (PHY_BASIC_FEATURES | SUPPORTED_Pause),
+	.features	= PHY_BASIC_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT | PHY_IS_INTERNAL,
 	.config_init	= bcm63xx_config_init,
 	.ack_interrupt	= bcm_phy_ack_intr,
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 8872a430d74a..cbec296107bd 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -2201,7 +2201,7 @@ static struct phy_driver marvell_drivers[] = {
 		.phy_id = MARVELL_PHY_ID_88E1510,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1510",
-		.features = PHY_GBIT_FEATURES | SUPPORTED_FIBRE,
+		.features = PHY_GBIT_FIBRE_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
 		.probe = &m88e1510_probe,
 		.config_init = &m88e1510_config_init,
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index f214834819dd..1c9d039eec63 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -535,16 +535,7 @@ static struct phy_driver mv3310_drivers[] = {
 		.phy_id		= 0x002b09aa,
 		.phy_id_mask	= MARVELL_PHY_ID_MASK,
 		.name		= "mv88x3310",
-		.features	= SUPPORTED_10baseT_Full |
-				  SUPPORTED_10baseT_Half |
-				  SUPPORTED_100baseT_Full |
-				  SUPPORTED_100baseT_Half |
-				  SUPPORTED_1000baseT_Full |
-				  SUPPORTED_Autoneg |
-				  SUPPORTED_TP |
-				  SUPPORTED_FIBRE |
-				  SUPPORTED_10000baseT_Full |
-				  SUPPORTED_Backplane,
+		.features	= PHY_10GBIT_FEATURES,
 		.soft_reset	= gen10g_no_soft_reset,
 		.config_init	= mv3310_config_init,
 		.probe		= mv3310_probe,
diff --git a/drivers/net/phy/microchip_t1.c b/drivers/net/phy/microchip_t1.c
index b1917dd1978a..c600a8509d60 100644
--- a/drivers/net/phy/microchip_t1.c
+++ b/drivers/net/phy/microchip_t1.c
@@ -46,7 +46,7 @@ static struct phy_driver microchip_t1_phy_driver[] = {
 		.phy_id_mask    = 0xfffffff0,
 		.name           = "Microchip LAN87xx T1",
 
-		.features       = SUPPORTED_100baseT_Full,
+		.features       = PHY_BASIC_T1_FEATURES,
 		.flags          = PHY_HAS_INTERRUPT,
 
 		.config_init    = genphy_config_init,
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 35102e17bbeb..f53ce65f45c5 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -29,6 +29,7 @@
 #include <linux/module.h>
 #include <linux/mii.h>
 #include <linux/ethtool.h>
+#include <linux/bitmap.h>
 #include <linux/phy.h>
 #include <linux/phy_led_triggers.h>
 #include <linux/mdio.h>
@@ -42,6 +43,149 @@ MODULE_DESCRIPTION("PHY library");
 MODULE_AUTHOR("Andy Fleming");
 MODULE_LICENSE("GPL");
 
+__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_features) __ro_after_init;
+EXPORT_SYMBOL_GPL(phy_basic_features);
+
+__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1_features) __ro_after_init;
+EXPORT_SYMBOL_GPL(phy_basic_t1_features);
+
+__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_features) __ro_after_init;
+EXPORT_SYMBOL_GPL(phy_gbit_features);
+
+__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_fibre_features) __ro_after_init;
+EXPORT_SYMBOL_GPL(phy_gbit_fibre_features);
+
+__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_all_ports_features) __ro_after_init;
+EXPORT_SYMBOL_GPL(phy_gbit_all_ports_features);
+
+__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_features) __ro_after_init;
+EXPORT_SYMBOL_GPL(phy_10gbit_features);
+
+static const int phy_basic_ports_array[] = {
+	ETHTOOL_LINK_MODE_Autoneg_BIT,
+	ETHTOOL_LINK_MODE_TP_BIT,
+	ETHTOOL_LINK_MODE_MII_BIT,
+};
+
+static const int phy_fibre_port_array[] = {
+	ETHTOOL_LINK_MODE_FIBRE_BIT,
+};
+
+static const int phy_all_ports_features_array[] = {
+	ETHTOOL_LINK_MODE_Autoneg_BIT,
+	ETHTOOL_LINK_MODE_TP_BIT,
+	ETHTOOL_LINK_MODE_MII_BIT,
+	ETHTOOL_LINK_MODE_FIBRE_BIT,
+	ETHTOOL_LINK_MODE_AUI_BIT,
+	ETHTOOL_LINK_MODE_BNC_BIT,
+	ETHTOOL_LINK_MODE_Backplane_BIT,
+};
+
+static const int phy_10_100_features_array[] = {
+	ETHTOOL_LINK_MODE_10baseT_Half_BIT,
+	ETHTOOL_LINK_MODE_10baseT_Full_BIT,
+	ETHTOOL_LINK_MODE_100baseT_Half_BIT,
+	ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+};
+
+static const int phy_basic_t1_features_array[] = {
+	ETHTOOL_LINK_MODE_TP_BIT,
+	ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+};
+
+static const int phy_gbit_features_array[] = {
+	ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
+	ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+};
+
+static const int phy_10gbit_features_array[] = {
+	ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
+};
+
+__ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_full_features) __ro_after_init;
+EXPORT_SYMBOL_GPL(phy_10gbit_full_features);
+
+static const int phy_10gbit_full_features_array[] = {
+	ETHTOOL_LINK_MODE_10baseT_Full_BIT,
+	ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+	ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+	ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
+};
+
+static void features_init(void)
+{
+	/* 10/100 half/full*/
+	linkmode_set_bit_array(phy_basic_ports_array,
+			       ARRAY_SIZE(phy_basic_ports_array),
+			       phy_basic_features);
+	linkmode_set_bit_array(phy_10_100_features_array,
+			       ARRAY_SIZE(phy_10_100_features_array),
+			       phy_basic_features);
+
+	/* 100 full, TP */
+	linkmode_set_bit_array(phy_basic_t1_features_array,
+			       ARRAY_SIZE(phy_basic_t1_features_array),
+			       phy_basic_t1_features);
+
+	/* 10/100 half/full + 1000 half/full */
+	linkmode_set_bit_array(phy_basic_ports_array,
+			       ARRAY_SIZE(phy_basic_ports_array),
+			       phy_gbit_features);
+	linkmode_set_bit_array(phy_10_100_features_array,
+			       ARRAY_SIZE(phy_10_100_features_array),
+			       phy_gbit_features);
+	linkmode_set_bit_array(phy_gbit_features_array,
+			       ARRAY_SIZE(phy_gbit_features_array),
+			       phy_gbit_features);
+
+	/* 10/100 half/full + 1000 half/full + fibre*/
+	linkmode_set_bit_array(phy_basic_ports_array,
+			       ARRAY_SIZE(phy_basic_ports_array),
+			       phy_gbit_fibre_features);
+	linkmode_set_bit_array(phy_10_100_features_array,
+			       ARRAY_SIZE(phy_10_100_features_array),
+			       phy_gbit_fibre_features);
+	linkmode_set_bit_array(phy_gbit_features_array,
+			       ARRAY_SIZE(phy_gbit_features_array),
+			       phy_gbit_fibre_features);
+	linkmode_set_bit_array(phy_fibre_port_array,
+			       ARRAY_SIZE(phy_fibre_port_array),
+			       phy_gbit_fibre_features);
+
+	/* 10/100 half/full + 1000 half/full + TP/MII/FIBRE/AUI/BNC/Backplane*/
+	linkmode_set_bit_array(phy_all_ports_features_array,
+			       ARRAY_SIZE(phy_all_ports_features_array),
+			       phy_gbit_all_ports_features);
+	linkmode_set_bit_array(phy_10_100_features_array,
+			       ARRAY_SIZE(phy_10_100_features_array),
+			       phy_gbit_all_ports_features);
+	linkmode_set_bit_array(phy_gbit_features_array,
+			       ARRAY_SIZE(phy_gbit_features_array),
+			       phy_gbit_all_ports_features);
+
+	/* 10/100 half/full + 1000 half/full + 10G full*/
+	linkmode_set_bit_array(phy_all_ports_features_array,
+			       ARRAY_SIZE(phy_all_ports_features_array),
+			       phy_10gbit_features);
+	linkmode_set_bit_array(phy_10_100_features_array,
+			       ARRAY_SIZE(phy_10_100_features_array),
+			       phy_10gbit_features);
+	linkmode_set_bit_array(phy_gbit_features_array,
+			       ARRAY_SIZE(phy_gbit_features_array),
+			       phy_10gbit_features);
+	linkmode_set_bit_array(phy_10gbit_features_array,
+			       ARRAY_SIZE(phy_10gbit_features_array),
+			       phy_10gbit_features);
+
+	/* 10/100/1000/10G full */
+	linkmode_set_bit_array(phy_all_ports_features_array,
+			       ARRAY_SIZE(phy_all_ports_features_array),
+			       phy_10gbit_full_features);
+	linkmode_set_bit_array(phy_10gbit_full_features_array,
+			       ARRAY_SIZE(phy_10gbit_full_features_array),
+			       phy_10gbit_full_features);
+}
+
 void phy_device_free(struct phy_device *phydev)
 {
 	put_device(&phydev->mdio.dev);
@@ -1936,6 +2080,7 @@ static int phy_probe(struct device *dev)
 	struct phy_device *phydev = to_phy_device(dev);
 	struct device_driver *drv = phydev->mdio.dev.driver;
 	struct phy_driver *phydrv = to_phy_driver(drv);
+	u32 features;
 	int err = 0;
 
 	phydev->drv = phydrv;
@@ -1956,7 +2101,8 @@ static int phy_probe(struct device *dev)
 	 * a controller will attach, and may modify one
 	 * or both of these values
 	 */
-	phydev->supported = phydrv->features;
+	ethtool_convert_link_mode_to_legacy_u32(&features, phydrv->features);
+	phydev->supported = features;
 	of_set_phy_supported(phydev);
 	phydev->advertising = phydev->supported;
 
@@ -1976,10 +2122,14 @@ static int phy_probe(struct device *dev)
 	 * (e.g. hardware erratum) where the driver wants to set only one
 	 * of these bits.
 	 */
-	if (phydrv->features & (SUPPORTED_Pause | SUPPORTED_Asym_Pause)) {
+	if (test_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydrv->features) ||
+	    test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, phydrv->features)) {
 		phydev->supported &= ~(SUPPORTED_Pause | SUPPORTED_Asym_Pause);
-		phydev->supported |= phydrv->features &
-				     (SUPPORTED_Pause | SUPPORTED_Asym_Pause);
+		if (test_bit(ETHTOOL_LINK_MODE_Pause_BIT, phydrv->features))
+			phydev->supported |= SUPPORTED_Pause;
+		if (test_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+			     phydrv->features))
+			phydev->supported |= SUPPORTED_Asym_Pause;
 	} else {
 		phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
 	}
@@ -2092,9 +2242,7 @@ static struct phy_driver genphy_driver = {
 	.name		= "Generic PHY",
 	.soft_reset	= genphy_no_soft_reset,
 	.config_init	= genphy_config_init,
-	.features	= PHY_GBIT_FEATURES | SUPPORTED_MII |
-			  SUPPORTED_AUI | SUPPORTED_FIBRE |
-			  SUPPORTED_BNC,
+	.features	= PHY_GBIT_ALL_PORTS_FEATURES,
 	.aneg_done	= genphy_aneg_done,
 	.suspend	= genphy_suspend,
 	.resume		= genphy_resume,
@@ -2109,6 +2257,8 @@ static int __init phy_init(void)
 	if (rc)
 		return rc;
 
+	features_init();
+
 	rc = phy_driver_register(&genphy_10g_driver, THIS_MODULE);
 	if (rc)
 		goto err_10g;
diff --git a/include/linux/linkmode.h b/include/linux/linkmode.h
index 014fb86c7114..22443d7fb5cd 100644
--- a/include/linux/linkmode.h
+++ b/include/linux/linkmode.h
@@ -43,6 +43,15 @@ static inline void linkmode_set_bit(int nr, volatile unsigned long *addr)
 	__set_bit(nr, addr);
 }
 
+static inline void linkmode_set_bit_array(const int *array, int array_size,
+					  unsigned long *addr)
+{
+	int i;
+
+	for (i = 0; i < array_size; i++)
+		linkmode_set_bit(array[i], addr);
+}
+
 static inline void linkmode_clear_bit(int nr, volatile unsigned long *addr)
 {
 	__clear_bit(nr, addr);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 0f6e7bf5e9c5..dff51dd36e52 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -42,13 +42,21 @@
 #define PHY_1000BT_FEATURES	(SUPPORTED_1000baseT_Half | \
 				 SUPPORTED_1000baseT_Full)
 
-#define PHY_BASIC_FEATURES	(PHY_10BT_FEATURES | \
-				 PHY_100BT_FEATURES | \
-				 PHY_DEFAULT_FEATURES)
-
-#define PHY_GBIT_FEATURES	(PHY_BASIC_FEATURES | \
-				 PHY_1000BT_FEATURES)
-
+extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_features) __ro_after_init;
+extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_basic_t1_features) __ro_after_init;
+extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_features) __ro_after_init;
+extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_fibre_features) __ro_after_init;
+extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_gbit_all_ports_features) __ro_after_init;
+extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_features) __ro_after_init;
+extern __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_10gbit_full_features) __ro_after_init;
+
+#define PHY_BASIC_FEATURES ((unsigned long *)&phy_basic_features)
+#define PHY_BASIC_T1_FEATURES ((unsigned long *)&phy_basic_t1_features)
+#define PHY_GBIT_FEATURES ((unsigned long *)&phy_gbit_features)
+#define PHY_GBIT_FIBRE_FEATURES ((unsigned long *)&phy_gbit_fibre_features)
+#define PHY_GBIT_ALL_PORTS_FEATURES ((unsigned long *)&phy_gbit_all_ports_features)
+#define PHY_10GBIT_FEATURES ((unsigned long *)&phy_10gbit_features)
+#define PHY_10GBIT_FULL_FEATURES ((unsigned long *)&phy_10gbit_full_features)
 
 /*
  * Set phydev->irq to PHY_POLL if interrupts are not supported,
@@ -510,7 +518,7 @@ struct phy_driver {
 	u32 phy_id;
 	char *name;
 	u32 phy_id_mask;
-	u32 features;
+	const unsigned long * const features;
 	u32 flags;
 	const void *driver_data;
 
-- 
2.19.0.rc1

Re: [PATCH v2 net-next 7/8] net: ethernet: xgbe: expand PHY_GBIT_FEAUTRES

[Sergei Shtylyov]

Hello!

On 9/30/2018 12:04 AM, Andrew Lunn wrote:

> The macro PHY_GBIT_FEAUTRES needs to change into a bitmap in order to
> support link_modes. Remove its use from xgde by replacing it with its
> definition.
> 
> Probably, the current behavior is wrong. It probably should be
> ANDing not assigning.

    ORing, maybe?

> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> ---
> v2
> Remove unneeded ()

    Really? :-)

> ---
>   drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 10 ++++++----
>   1 file changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
> index a7e03e3ecc93..151bdb629e8a 100644
> --- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
> +++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
> @@ -878,8 +878,9 @@ static bool xgbe_phy_finisar_phy_quirks(struct xgbe_prv_data *pdata)
>   	phy_write(phy_data->phydev, 0x04, 0x0d01);
>   	phy_write(phy_data->phydev, 0x00, 0x9140);
>   
> -	phy_data->phydev->supported = PHY_GBIT_FEATURES;
> -	phy_data->phydev->advertising = phy_data->phydev->supported;
> +	phy_data->phydev->supported = PHY_10BT_FEATURES |
> +				      PHY_100BT_FEATURES |
> +				      PHY_1000BT_FEATURES;
>   	phy_support_asym_pause(phy_data->phydev);
>   
>   	netif_dbg(pdata, drv, pdata->netdev,
> @@ -950,8 +951,9 @@ static bool xgbe_phy_belfuse_phy_quirks(struct xgbe_prv_data *pdata)
>   	reg = phy_read(phy_data->phydev, 0x00);
>   	phy_write(phy_data->phydev, 0x00, reg & ~0x00800);
>   
> -	phy_data->phydev->supported = PHY_GBIT_FEATURES;
> -	phy_data->phydev->advertising = phy_data->phydev->supported;
> +	phy_data->phydev->supported = (PHY_10BT_FEATURES |
> +				       PHY_100BT_FEATURES |
> +				       PHY_1000BT_FEATURES);

    First time w/o parens and 2nd time with them doesn't look very consistent...

>   	phy_support_asym_pause(phy_data->phydev);
>   
>   	netif_dbg(pdata, drv, pdata->netdev,

MBR, Sergei

Re: [PATCH v2 net-next 7/8] net: ethernet: xgbe: expand PHY_GBIT_FEAUTRES

[Andrew Lunn]

On Sun, Sep 30, 2018 at 11:41:00AM +0300, Sergei Shtylyov wrote:
> Hello!
> 
> On 9/30/2018 12:04 AM, Andrew Lunn wrote:
> 
> >The macro PHY_GBIT_FEAUTRES needs to change into a bitmap in order to
> >support link_modes. Remove its use from xgde by replacing it with its
> >definition.
> >
> >Probably, the current behavior is wrong. It probably should be
> >ANDing not assigning.
> 
>    ORing, maybe?

Hi Sergei

It is hard to know what was intended here.

By assigning these speeds, if the PHY does not actually support 1Gbps,
that information is going to be overwritten. So it should really be
ANDing with that the MAC supports. ORing would have the same problem.
This assignment is also clearing out an TP, AUI, BNC bits which might
be set.

Since i don't really know what the intention is here, i'm just going
to leave it alone.

> 
> >Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> >---
> >v2
> >Remove unneeded ()
> 
>    Really? :-)

I did not say all unneeded :-)

I will remove some more.

  Andrew

Re: [PATCH v2 net-next 0/8] Continue towards using linkmode in phylib

[David Miller]

From: Andrew Lunn <andrew@lunn.ch>
Date: Sat, 29 Sep 2018 23:04:08 +0200

> These patches contain some further cleanup and helpers, and the first
> real patch towards using linkmode bitmaps in phylink.
> 
> The macro magic in the RFC version has been replaced with run time
> initialisation.

Series applied, thanks Andrew.