[GIT PULL] Allwinner H3/H5 changes for 4.20

[GIT PULL] Allwinner H3/H5 changes for 4.20

[Maxime Ripard]

Hi Arnd, Olof,

Here are the usual H3/H5 changes for the next merge window spread
across arm and arm64.

Thanks!
Maxime

The following changes since commit 5b394b2ddf0347bef56e50c69a58773c94343ff3:

  Linux 4.19-rc1 (2018-08-26 14:11:59 -0700)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-h3-h5-for-4.20

for you to fetch changes up to 6eeb4180d4b9887b6bc8bbe0a22c1ce3634417f0:

  ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees (2018-09-29 15:58:38 +0200)

----------------------------------------------------------------
Allwinner H3 and H5 DT additions for 4.20

This is our usual H3/H5 pull request

The most notable changes are:
  - the video decoding / encoding unit is finally enabled on the H3
  - Mali support for the H5
  - New boards: BananaPi M2+ v1.2, Orange Pi Zero Plus 2 H3 support

----------------------------------------------------------------
Chen-Yu Tsai (5):
      arm64: dts: allwinner: h5: Add device node for Mali-450 GPU
      ARM: dts: sun8i: h3: bpi-m2-plus: Fix address for external RGMII Ethernet PHY
      ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus
      arm64: dts: allwinner: h5: Add device tree for Bananapi M2 Plus H5
      ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees

Diego Rondini (1):
      ARM: dts: sun8i: Add initial Orangepi Zero Plus 2 H3 support

Emmanuel Vadot (1):
      nvmem: sunxi-sid: add support for H5's SID controller

Paul Kocialkowski (1):
      ARM: dts: sun8i-h3: Add Video Engine and reserved memory nodes

Philipp Rossak (1):
      ARM: dts: sun8i: h3-h5: ir register size should be the whole memory block

 .../bindings/nvmem/allwinner,sunxi-sid.txt         |   1 +
 arch/arm/boot/dts/Makefile                         |   2 +
 .../boot/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts    |  13 ++
 arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts    | 190 +----------------
 arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts | 140 +++++++++++++
 arch/arm/boot/dts/sun8i-h3.dtsi                    |  25 +++
 arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi |  31 +++
 arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi      | 231 +++++++++++++++++++++
 arch/arm/boot/dts/sunxi-h3-h5.dtsi                 |   2 +-
 arch/arm64/boot/dts/allwinner/Makefile             |   2 +
 .../allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts  |  11 +
 .../dts/allwinner/sun50i-h5-bananapi-m2-plus.dts   |  11 +
 arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi       |  43 ++++
 13 files changed, 513 insertions(+), 189 deletions(-)
 create mode 100644 arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus-v1.2.dts
 create mode 100644 arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
 create mode 100644 arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
 create mode 100644 arch/arm/boot/dts/sunxi-bananapi-m2-plus.dtsi
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus.dts

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180929/f1fe4d98/attachment.sig>

[GIT PULL] Allwinner H3/H5 changes for 4.20

[Arnd Bergmann]

On Sat, Sep 29, 2018 at 4:07 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> ----------------------------------------------------------------
> Allwinner H3 and H5 DT additions for 4.20
>
> This is our usual H3/H5 pull request
>
> The most notable changes are:
>   - the video decoding / encoding unit is finally enabled on the H3
>   - Mali support for the H5
>   - New boards: BananaPi M2+ v1.2, Orange Pi Zero Plus 2 H3 support

Good to see the video unit progress. Is the driver also coming for 4.20?

Pulled into next/dt, thanks!

    Arnd

[GIT PULL] Allwinner H3/H5 changes for 4.20

[Maxime Ripard]

Hi!

On Tue, Oct 02, 2018 at 10:24:30AM +0200, Arnd Bergmann wrote:
> On Sat, Sep 29, 2018 at 4:07 PM Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> > ----------------------------------------------------------------
> > Allwinner H3 and H5 DT additions for 4.20
> >
> > This is our usual H3/H5 pull request
> >
> > The most notable changes are:
> >   - the video decoding / encoding unit is finally enabled on the H3
> >   - Mali support for the H5
> >   - New boards: BananaPi M2+ v1.2, Orange Pi Zero Plus 2 H3 support
> 
> Good to see the video unit progress. Is the driver also coming for 4.20?

It's been merged through the media tree, yes. The only supported codec
so far is MPEG2 though, but we have patches to enable H264 and H265
decoding that have been submitted already.

Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20181002/37253705/attachment.sig>