[U-Boot] [PATCH 10/53] armv8: ls1043ardb: Add TFABOOT defconfig

[Rajesh Bhagat <rajesh.bhagat@nxp.com>]

This defconfig is for TFABOOT, to be loaded by trusted firmware.

Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
---
 board/freescale/ls1043ardb/ddr.c        |  6 ++-
 board/freescale/ls1043ardb/ls1043ardb.c | 12 ++++++
 configs/ls1043ardb_ram_defconfig        | 49 +++++++++++++++++++++++++
 include/configs/ls1043a_common.h        |  7 +++-
 4 files changed, 71 insertions(+), 3 deletions(-)
 create mode 100644 configs/ls1043ardb_ram_defconfig

diff --git a/board/freescale/ls1043ardb/ddr.c b/board/freescale/ls1043ardb/ddr.c
index 7bc0f568ff..1fb1635dfb 100644
--- a/board/freescale/ls1043ardb/ddr.c
+++ b/board/freescale/ls1043ardb/ddr.c
@@ -210,14 +210,16 @@ int fsl_initdram(void)
 	phys_size_t dram_size;
 
 #ifdef CONFIG_SYS_DDR_RAW_TIMING
-#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL)
+#if !defined(CONFIG_TFABOOT) && \
+	(defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL))
 	puts("Initializing DDR....\n");
 	dram_size = fsl_ddr_sdram();
 #else
 	dram_size =  fsl_ddr_sdram_size();
 #endif
 #else
-#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL)
+#if !defined(CONFIG_TFABOOT) && \
+	(defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL))
 	puts("Initialzing DDR using fixed setting\n");
 	dram_size = fixed_sdram();
 #else
diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c
index e7d8650d27..aa266557ba 100644
--- a/board/freescale/ls1043ardb/ls1043ardb.c
+++ b/board/freescale/ls1043ardb/ls1043ardb.c
@@ -37,6 +37,9 @@ int board_early_init_f(void)
 
 int checkboard(void)
 {
+#ifdef CONFIG_TFABOOT
+	enum boot_src src = get_boot_src();
+#endif
 	static const char *freq[2] = {"100.00MHZ", "156.25MHZ"};
 #ifndef CONFIG_SD_BOOT
 	u8 cfg_rcw_src1, cfg_rcw_src2;
@@ -46,6 +49,12 @@ int checkboard(void)
 
 	printf("Board: LS1043ARDB, boot from ");
 
+#ifdef CONFIG_TFABOOT
+	if (src == BOOT_SOURCE_SD_MMC)
+		puts("SD\n");
+	else {
+#endif
+
 #ifdef CONFIG_SD_BOOT
 	puts("SD\n");
 #else
@@ -63,6 +72,9 @@ int checkboard(void)
 		printf("Invalid setting of SW4\n");
 #endif
 
+#ifdef CONFIG_TFABOOT
+	}
+#endif
 	printf("CPLD:  V%x.%x\nPCBA:  V%x.0\n", CPLD_READ(cpld_ver),
 	       CPLD_READ(cpld_ver_sub), CPLD_READ(pcba_ver));
 
diff --git a/configs/ls1043ardb_ram_defconfig b/configs/ls1043ardb_ram_defconfig
new file mode 100644
index 0000000000..a15cb524d3
--- /dev/null
+++ b/configs/ls1043ardb_ram_defconfig
@@ -0,0 +1,49 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1043ARDB=y
+CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_TFABOOT=y
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=60000000.nor:2m at 0x100000(nor_bank0_uboot),40m at 0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m at 0x4100000(nor_bank4_uboot),40m at 0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
+CONFIG_MISC_INIT_R=y
+CONFIG_CMD_IMLS=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_CACHE=y
+CONFIG_MP=y
+CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:2m at 0x100000(nor_bank0_uboot),40m at 0x1100000(nor_bank0_fit),7m(nor_bank0_user),2m at 0x4100000(nor_bank4_uboot),40m at 0x5100000(nor_bank4_fit),-(nor_bank4_user);7e800000.flash:1m(nand_uboot),1m(nand_uboot_env),20m(nand_fit);spi0.0:1m(uboot),5m(kernel),1m(dtb),9m(file_system)"
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1043a-rdb"
+CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_DM=y
+CONFIG_FSL_CAAM=y
+CONFIG_FSL_ESDHC=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_SPI_FLASH=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_PHYLIB=y
+CONFIG_PHY_GIGE=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index 656d10dffb..80676487ae 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -33,7 +33,11 @@
 #include <asm/arch/config.h>
 
 /* Link Definitions */
+#ifdef CONFIG_TFABOOT
+#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE
+#else
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
+#endif
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
@@ -119,7 +123,8 @@
 
 /* IFC */
 #ifndef SPL_NO_IFC
-#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
+#if defined(CONFIG_TFABOOT) || \
+	(!defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI))
 #define CONFIG_FSL_IFC
 /*
  * CONFIG_SYS_FLASH_BASE has the final address (core view)
-- 
2.17.1