All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rajesh Bhagat <rajesh.bhagat@nxp.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 20/53] armv8: ls1046a: define BOOTCOMMAND for TFABOOT
Date: Wed,  3 Oct 2018 16:14:26 +0530	[thread overview]
Message-ID: <20181003104459.5444-21-rajesh.bhagat@nxp.com> (raw)
In-Reply-To: <20181003104459.5444-1-rajesh.bhagat@nxp.com>

Defines BOOTCOMMAND for TFABOOT configuration for
supported boot sources.

Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
---
 include/configs/ls1046aqds.h | 9 +++++++++
 include/configs/ls1046ardb.h | 7 +++++++
 2 files changed, 16 insertions(+)

diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index 765a21e00f..2a30cef0e4 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -432,6 +432,14 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMDLINE_TAG
 
 #undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_TFABOOT
+#define QSPI_NOR_BOOTCOMMAND		"sf probe && sf read $kernel_load "    \
+					"e0000 f00000 && bootm $kernel_load"
+#define IFC_NOR_BOOTCOMMAND		"cp.b $kernel_start $kernel_load "     \
+					"$kernel_size && bootm $kernel_load"
+#define SD_BOOTCOMMAND		"mmc info; mmc read $kernel_load"     \
+					"$kernel_addr_sd $kernel_size_sd && bootm $kernel_load"
+#else
 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_BOOTCOMMAND		"sf probe && sf read $kernel_load "    \
 					"e0000 f00000 && bootm $kernel_load"
@@ -439,6 +447,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_BOOTCOMMAND		"cp.b $kernel_start $kernel_load "     \
 					"$kernel_size && bootm $kernel_load"
 #endif
+#endif
 
 #include <asm/fsl_secure_boot.h>
 
diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index b8d9419b48..cc1f5f5f55 100644
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -216,6 +216,12 @@
 
 #ifndef SPL_NO_MISC
 #undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_TFABOOT
+#define QSPI_NOR_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;;"
+#define SD_BOOTCOMMAND "run distro_bootcmd;run sd_bootcmd; "	\
+			   "env exists secureboot && esbc_halt;"
+#else
 #if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; "	\
 			   "env exists secureboot && esbc_halt;;"
@@ -224,6 +230,7 @@
 			   "env exists secureboot && esbc_halt;"
 #endif
 #endif
+#endif
 
 #include <asm/fsl_secure_boot.h>
 
-- 
2.17.1

  parent reply	other threads:[~2018-10-03 10:44 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-03 10:44 [U-Boot] [PATCH 00/53] TF-A Boot support for NXP Chassis 2 platforms Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 01/53] move data structure out of cpu.h Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 02/53] env: allow flash and nand env driver to compile together Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 03/53] env: sf: define API to override sf environment address Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 04/53] env: nand: remove unnecessary env_ptr definition Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 05/53] armv8: layerscape: add TFABOOT config option Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 06/53] armv8: fsl-layerscape: identify boot source from PORSR register Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 07/53] armv8: ls1046ardb: Add TFABOOT defconfig Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 08/53] armv8: ls1046aqds: " Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 09/53] armv8: ls1046a: make environment address and size common Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 10/53] armv8: ls1043ardb: Add TFABOOT defconfig Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 11/53] armv8: ls1043aqds: " Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 12/53] armv8: ls1043a: make environment address and size common Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 13/53] armv8: ls1043aqds: define environment address for QSPI boot Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 14/53] armv8: ls1046aqds: " Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 15/53] net: fm: add TFABOOT support Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 16/53] drivers: qe: " Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 17/53] armv8: ls1046a: make FMAN address common Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 18/53] armv8: ls1043a: make FMAN and QE " Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 19/53] armv8: fsl-layerscape: bootcmd identification for TFABOOT Rajesh Bhagat
2018-10-03 10:44 ` Rajesh Bhagat [this message]
2018-10-03 10:44 ` [U-Boot] [PATCH 21/53] armv8: ls1043a: define BOOTCOMMAND " Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 22/53] armv8: ls1012ardb: Add TFABOOT defconfig Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 23/53] armv8: ls1012aqds: " Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 24/53] armv8: ls1012a: update environment address for TFABOOT Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 25/53] armv8: ls1012a: define BOOTCOMMAND " Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 26/53] armv8: layerscape: remove EL3 specific erratas " Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 27/53] armv8: sec_firmware: return job ring status as true in TFABOOT Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 28/53] armv8: layerscape: secure boot support for environment selection Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 29/53] armv8: layerscape: add SMC calls for DDR size and bank info Rajesh Bhagat
2018-10-03 10:44 ` [U-Boot] [PATCH 30/53] armv8: layerscape: skip OCRAM init for TFABOOT Rajesh Bhagat
2018-10-03 11:36 [U-Boot] [PATCH 00/53] TF-A Boot support for NXP Chassis 2 platforms Rajesh Bhagat
2018-10-03 11:37 ` [U-Boot] [PATCH 20/53] armv8: ls1046a: define BOOTCOMMAND for TFABOOT Rajesh Bhagat
2018-10-03 16:28   ` York Sun
2018-10-04 11:31     ` Rajesh Bhagat

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181003104459.5444-21-rajesh.bhagat@nxp.com \
    --to=rajesh.bhagat@nxp.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.