* [U-Boot] [PATCH 2/5] ARM: DTS: Remove unnecessary u-boot.dtsi options from omap3/36xx
2018-09-29 19:10 [U-Boot] [PATCH 1/5] ARM: DTS: LogicPD-SOM-LV & Torpedo: Resync DTS with Kernel Adam Ford
@ 2018-09-29 19:10 ` Adam Ford
2018-10-07 0:29 ` [U-Boot] [U-Boot, " Tom Rini
2018-09-29 19:10 ` [U-Boot] [PATCH 3/5] ARM: DTS: Add support for Logic PD OMAP35 Torpedo & SOM-LV Adam Ford
` (3 subsequent siblings)
4 siblings, 1 reply; 10+ messages in thread
From: Adam Ford @ 2018-09-29 19:10 UTC (permalink / raw)
To: u-boot
With the introduction of the omap serial driver, the need for some
of these U-Boot specific modifications is gone. This cleans up
this unnneeded stuff.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm/dts/logicpd-torpedo-37xx-devkit-u-boot.dtsi b/arch/arm/dts/logicpd-torpedo-37xx-devkit-u-boot.dtsi
index d584b4a9ab..41ed5d7e17 100644
--- a/arch/arm/dts/logicpd-torpedo-37xx-devkit-u-boot.dtsi
+++ b/arch/arm/dts/logicpd-torpedo-37xx-devkit-u-boot.dtsi
@@ -4,14 +4,6 @@
* Logic PD - http://www.logicpd.com
*/
-/ {
- model = "LogicPD Zoom OMAP3 Development Kit";
-
- chosen {
- stdout-path = &uart1;
- };
-};
-
&i2c1 {
clock-frequency = <400000>;
};
@@ -28,15 +20,3 @@
status = "disabled";
};
-&uart1 {
- reg-shift = <2>;
-};
-
-&uart2 {
- reg-shift = <2>;
-};
-
-&uart3 {
- reg-shift = <2>;
-};
-
diff --git a/arch/arm/dts/omap3-u-boot.dtsi b/arch/arm/dts/omap3-u-boot.dtsi
deleted file mode 100644
index 633153a41e..0000000000
--- a/arch/arm/dts/omap3-u-boot.dtsi
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2017
- * Logic PD - http://www.logicpd.com
- */
-
-&uart1 {
- reg-shift = <2>;
-};
-
-&uart2 {
- reg-shift = <2>;
-};
-
-&uart3 {
- reg-shift = <2>;
-};
-
diff --git a/arch/arm/dts/omap36xx-u-boot.dtsi b/arch/arm/dts/omap36xx-u-boot.dtsi
deleted file mode 100644
index 374499dcb2..0000000000
--- a/arch/arm/dts/omap36xx-u-boot.dtsi
+++ /dev/null
@@ -1,9 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2017
- * Logic PD - http://www.logicpd.com
- */
-
-&uart4 {
- reg-shift = <2>;
-};
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [U-Boot] [PATCH 3/5] ARM: DTS: Add support for Logic PD OMAP35 Torpedo & SOM-LV
2018-09-29 19:10 [U-Boot] [PATCH 1/5] ARM: DTS: LogicPD-SOM-LV & Torpedo: Resync DTS with Kernel Adam Ford
2018-09-29 19:10 ` [U-Boot] [PATCH 2/5] ARM: DTS: Remove unnecessary u-boot.dtsi options from omap3/36xx Adam Ford
@ 2018-09-29 19:10 ` Adam Ford
2018-10-07 0:29 ` [U-Boot] [U-Boot, " Tom Rini
2018-09-29 19:10 ` [U-Boot] [PATCH 4/5] ARM: DTS: Add Logic PD OMAP35/DM37 SOM-LV and OMAP35 Torpedo Adam Ford
` (2 subsequent siblings)
4 siblings, 1 reply; 10+ messages in thread
From: Adam Ford @ 2018-09-29 19:10 UTC (permalink / raw)
To: u-boot
The baseboards and SOM's are virtually identical to their DM37
counterparts, but OMAP36/37 and OMAP3 have some minor register
differences. With the boards being mostly driven by device trees
now, this synchronizes their respective device trees with linux-omap
for-next branch destined for 4.20 (or whatever the version after 4.19
will be called)
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/dts/logicpd-som-lv-35xx-devkit.dts
new file mode 100644
index 0000000000..4cd72b5e61
--- /dev/null
+++ b/arch/arm/dts/logicpd-som-lv-35xx-devkit.dts
@@ -0,0 +1,32 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "logicpd-som-lv.dtsi"
+#include "logicpd-som-lv-baseboard.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+
+/ {
+ model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
+ compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3";
+};
+
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb2_2_pins>;
+ hsusb2_2_pins: pinmux_hsusb2_2_pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ >;
+ };
+};
diff --git a/arch/arm/dts/logicpd-torpedo-35xx-devkit.dts b/arch/arm/dts/logicpd-torpedo-35xx-devkit.dts
new file mode 100644
index 0000000000..d7cb659656
--- /dev/null
+++ b/arch/arm/dts/logicpd-torpedo-35xx-devkit.dts
@@ -0,0 +1,17 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "logicpd-torpedo-som.dtsi"
+#include "logicpd-torpedo-baseboard.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+
+/ {
+ model = "LogicPD Zoom OMAP35xx Torpedo Development Kit";
+ compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3";
+};
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [U-Boot] [PATCH 4/5] ARM: DTS: Add Logic PD OMAP35/DM37 SOM-LV and OMAP35 Torpedo
2018-09-29 19:10 [U-Boot] [PATCH 1/5] ARM: DTS: LogicPD-SOM-LV & Torpedo: Resync DTS with Kernel Adam Ford
2018-09-29 19:10 ` [U-Boot] [PATCH 2/5] ARM: DTS: Remove unnecessary u-boot.dtsi options from omap3/36xx Adam Ford
2018-09-29 19:10 ` [U-Boot] [PATCH 3/5] ARM: DTS: Add support for Logic PD OMAP35 Torpedo & SOM-LV Adam Ford
@ 2018-09-29 19:10 ` Adam Ford
2018-10-07 0:29 ` [U-Boot] [U-Boot, " Tom Rini
2018-09-29 19:10 ` [U-Boot] [PATCH 5/5] ARM: LogicPD: omap3logic: Remove Torpedo/SOM-LV autodection Adam Ford
2018-10-07 0:29 ` [U-Boot] [U-Boot, 1/5] ARM: DTS: LogicPD-SOM-LV & Torpedo: Resync DTS with Kernel Tom Rini
4 siblings, 1 reply; 10+ messages in thread
From: Adam Ford @ 2018-09-29 19:10 UTC (permalink / raw)
To: u-boot
With the device trees doing most of the work of pin-muxing and
DM doing much of the peripheral initialization, this creates
new defconfig files for each of the Logic PD variants with
proper register settings/pin-muxing.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm/dts/logicpd-som-lv-35xx-devkit-u-boot.dtsi b/arch/arm/dts/logicpd-som-lv-35xx-devkit-u-boot.dtsi
new file mode 100644
index 0000000000..6445048fe0
--- /dev/null
+++ b/arch/arm/dts/logicpd-som-lv-35xx-devkit-u-boot.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017
+ * Logic PD - http://www.logicpd.com
+ */
+
+/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&mmc1 {
+ cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* gpio_110 */
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
diff --git a/arch/arm/dts/logicpd-som-lv-37xx-devkit-u-boot.dtsi b/arch/arm/dts/logicpd-som-lv-37xx-devkit-u-boot.dtsi
new file mode 100644
index 0000000000..6445048fe0
--- /dev/null
+++ b/arch/arm/dts/logicpd-som-lv-37xx-devkit-u-boot.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017
+ * Logic PD - http://www.logicpd.com
+ */
+
+/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&mmc1 {
+ cd-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* gpio_110 */
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
diff --git a/arch/arm/dts/logicpd-torpedo-35xx-devkit-u-boot.dtsi b/arch/arm/dts/logicpd-torpedo-35xx-devkit-u-boot.dtsi
new file mode 100644
index 0000000000..41ed5d7e17
--- /dev/null
+++ b/arch/arm/dts/logicpd-torpedo-35xx-devkit-u-boot.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017
+ * Logic PD - http://www.logicpd.com
+ */
+
+&i2c1 {
+ clock-frequency = <400000>;
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+};
+
+&mmc2 {
+ status = "disabled";
+};
+
+&mmc3 {
+ status = "disabled";
+};
+
diff --git a/configs/omap35_logic_defconfig b/configs/omap35_logic_defconfig
new file mode 100644
index 0000000000..54c40d8c42
--- /dev/null
+++ b/configs/omap35_logic_defconfig
@@ -0,0 +1,72 @@
+CONFIG_ARM=y
+CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_TI_COMMON_CMD_OPTIONS=y
+# CONFIG_SPL_GPIO_SUPPORT is not set
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_OMAP3_LOGIC=y
+# CONFIG_SPL_OMAP3_ID_NAND is not set
+CONFIG_SPL=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=2
+# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_MTD_SUPPORT=y
+CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_PROMPT="OMAP Logic # "
+# CONFIG_CMD_IMI is not set
+CONFIG_CMD_SPL=y
+CONFIG_CMD_SPL_NAND_OFS=0x240000
+CONFIG_CMD_SPL_WRITE_SIZE=0x20000
+# CONFIG_CMD_EEPROM is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_NAND=y
+CONFIG_CMD_NAND_LOCK_UNLOCK=y
+CONFIG_CMD_CACHE=y
+CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-os),128k(u-boot-env),6m(kernel),-(fs)"
+CONFIG_CMD_UBI=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="logicpd-torpedo-35xx-devkit"
+CONFIG_SPL_OF_PLATDATA=y
+# CONFIG_ENV_IS_IN_FAT is not set
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SPL_DM=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x82000000
+CONFIG_DM_I2C=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_OMAP_HS=y
+CONFIG_NAND=y
+CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
+CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
+CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
+CONFIG_SPL_NAND_SIMPLE=y
+CONFIG_SMC911X=y
+CONFIG_SMC911X_BASE=0x08000000
+CONFIG_SMC911X_32_BIT=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_DM_PMIC=y
+# CONFIG_SPL_PMIC_CHILDREN is not set
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_OMAP3_SPI=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_MUSB_OMAP2PLUS=y
+CONFIG_TWL4030_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="TI"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
+CONFIG_USB_ETHER=y
+CONFIG_BCH=y
+# CONFIG_SPL_OF_LIBFDT is not set
diff --git a/configs/omap35_logic_somlv_defconfig b/configs/omap35_logic_somlv_defconfig
new file mode 100644
index 0000000000..4521aedb2a
--- /dev/null
+++ b/configs/omap35_logic_somlv_defconfig
@@ -0,0 +1,72 @@
+CONFIG_ARM=y
+CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_TI_COMMON_CMD_OPTIONS=y
+# CONFIG_SPL_GPIO_SUPPORT is not set
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_OMAP3_LOGIC=y
+# CONFIG_SPL_OMAP3_ID_NAND is not set
+CONFIG_SPL=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=2
+# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_MTD_SUPPORT=y
+CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_PROMPT="OMAP Logic # "
+# CONFIG_CMD_IMI is not set
+CONFIG_CMD_SPL=y
+CONFIG_CMD_SPL_NAND_OFS=0x240000
+CONFIG_CMD_SPL_WRITE_SIZE=0x20000
+# CONFIG_CMD_EEPROM is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_NAND=y
+CONFIG_CMD_NAND_LOCK_UNLOCK=y
+CONFIG_CMD_CACHE=y
+CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-os),128k(u-boot-env),6m(kernel),-(fs)"
+CONFIG_CMD_UBI=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="logicpd-som-lv-35xx-devkit"
+CONFIG_SPL_OF_PLATDATA=y
+# CONFIG_ENV_IS_IN_FAT is not set
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SPL_DM=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x82000000
+CONFIG_DM_I2C=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_OMAP_HS=y
+CONFIG_NAND=y
+CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
+CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
+CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
+CONFIG_SPL_NAND_SIMPLE=y
+CONFIG_SMC911X=y
+CONFIG_SMC911X_BASE=0x08000000
+CONFIG_SMC911X_32_BIT=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_DM_PMIC=y
+# CONFIG_SPL_PMIC_CHILDREN is not set
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_OMAP3_SPI=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_MUSB_OMAP2PLUS=y
+CONFIG_TWL4030_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="TI"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
+CONFIG_USB_ETHER=y
+CONFIG_BCH=y
+# CONFIG_SPL_OF_LIBFDT is not set
diff --git a/configs/omap3_logic_somlv_defconfig b/configs/omap3_logic_somlv_defconfig
new file mode 100644
index 0000000000..d29621d8ce
--- /dev/null
+++ b/configs/omap3_logic_somlv_defconfig
@@ -0,0 +1,73 @@
+CONFIG_ARM=y
+CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_TI_COMMON_CMD_OPTIONS=y
+# CONFIG_SPL_GPIO_SUPPORT is not set
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_OMAP3_LOGIC=y
+# CONFIG_SPL_OMAP3_ID_NAND is not set
+CONFIG_SPL=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=2
+# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_MTD_SUPPORT=y
+CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_PROMPT="OMAP Logic # "
+# CONFIG_CMD_IMI is not set
+CONFIG_CMD_SPL=y
+CONFIG_CMD_SPL_NAND_OFS=0x240000
+CONFIG_CMD_SPL_WRITE_SIZE=0x20000
+# CONFIG_CMD_EEPROM is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_NAND=y
+CONFIG_CMD_NAND_LOCK_UNLOCK=y
+CONFIG_CMD_CACHE=y
+CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-os),128k(u-boot-env),6m(kernel),-(fs)"
+CONFIG_CMD_UBI=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="logicpd-som-lv-37xx-devkit"
+CONFIG_SPL_OF_PLATDATA=y
+# CONFIG_ENV_IS_IN_FAT is not set
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SPL_DM=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x82000000
+CONFIG_DM_I2C=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_OMAP_HS=y
+CONFIG_MMC_OMAP36XX_PINS=y
+CONFIG_NAND=y
+CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
+CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
+CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
+CONFIG_SPL_NAND_SIMPLE=y
+CONFIG_SMC911X=y
+CONFIG_SMC911X_BASE=0x08000000
+CONFIG_SMC911X_32_BIT=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_DM_PMIC=y
+# CONFIG_SPL_PMIC_CHILDREN is not set
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_SPECIFY_CONSOLE_INDEX=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_OMAP3_SPI=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_GADGET=y
+CONFIG_USB_MUSB_OMAP2PLUS=y
+CONFIG_TWL4030_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="TI"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
+CONFIG_USB_ETHER=y
+CONFIG_BCH=y
+# CONFIG_SPL_OF_LIBFDT is not set
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [U-Boot] [PATCH 5/5] ARM: LogicPD: omap3logic: Remove Torpedo/SOM-LV autodection
2018-09-29 19:10 [U-Boot] [PATCH 1/5] ARM: DTS: LogicPD-SOM-LV & Torpedo: Resync DTS with Kernel Adam Ford
` (2 preceding siblings ...)
2018-09-29 19:10 ` [U-Boot] [PATCH 4/5] ARM: DTS: Add Logic PD OMAP35/DM37 SOM-LV and OMAP35 Torpedo Adam Ford
@ 2018-09-29 19:10 ` Adam Ford
2018-10-07 0:29 ` [U-Boot] [U-Boot, " Tom Rini
2018-10-07 0:29 ` [U-Boot] [U-Boot, 1/5] ARM: DTS: LogicPD-SOM-LV & Torpedo: Resync DTS with Kernel Tom Rini
4 siblings, 1 reply; 10+ messages in thread
From: Adam Ford @ 2018-09-29 19:10 UTC (permalink / raw)
To: u-boot
With there now being four device tree files, and 4 separate
defconfig files, the code necessary to determine which board is
being used is no longer necessary as the corresponding pin-muxing
and board names are determined by the device tree.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/board/logicpd/omap3som/README b/board/logicpd/omap3som/README
index b77b3d63db..5aaf58f0a6 100644
--- a/board/logicpd/omap3som/README
+++ b/board/logicpd/omap3som/README
@@ -1,21 +1,15 @@
Summary
=======
-The source for omap3som encompases the DM3730 SOM-LV and DM3730 Torpedo platforms.
+The source for omap3logic.c encompases the OMAP35 and DM3730 SOM-LV and DM3730 Torpedo platforms, but there are device trees custom taylored to each board.
-By default, the Torpedo Device Tree is integrated into U-Boot,but the MMC controller, GPIO and I2C controllers are the same, so for the purposes of loading U-Boot, it should be sufficient. However this will display the Model as "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit" upon boot.
+omap3_logic_defconfig = DM37 Torpedo / Torpedo + Wireless
+omap35_logic_defconfig = OMAP35 Torpedo
+omap3_logic_somlv_defconfig = DM37 SOM-LV
+omap35_logic_somlv_defconfig = OMAP35 SOM-LV
-The actual board remains autodetected and the Board will read "DM37xx SOM LV" when used on the DM37 SOM-LV. The device tree loaded with Linux is also correct.
-
-Integrating the SOM-LV Device Tree into U-Boot
-==============================================
-
-This step is optional, but should you want to change the default to the SOM-LV, locate the configs/omap3_logic_defconfig file and make the following change.
-
- CONFIG_DEFAULT_DEVICE_TREE="logicpd-som-lv-37xx-devkit"
-
- make distclean
- make omap3_logic_defconfig
+The device tree included with each of the defconfig files will also direct the board as to which dtb file to load when loading the kernel, so it is not
+recomended to mix and match the defconfig files.
Falcon Mode: FAT SD cards
=========================
diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c
index 48d886930f..4507b1ed99 100644
--- a/board/logicpd/omap3som/omap3logic.c
+++ b/board/logicpd/omap3som/omap3logic.c
@@ -70,40 +70,6 @@ U_BOOT_DEVICE(am335x_mmc0) = {
#endif
-/*
- * two dimensional array of strucures containining board name and Linux
- * machine IDs; row it selected based on CPU column is slected based
- * on hsusb0_data5 pin having a pulldown resistor
- */
-static struct board_id {
- char *name;
- int machine_id;
- char *fdtfile;
-} boards[2][2] = {
- {
- {
- .name = "OMAP35xx SOM LV",
- .machine_id = MACH_TYPE_OMAP3530_LV_SOM,
- .fdtfile = "logicpd-som-lv-35xx-devkit.dtb",
- },
- {
- .name = "OMAP35xx Torpedo",
- .machine_id = MACH_TYPE_OMAP3_TORPEDO,
- .fdtfile = "logicpd-torpedo-35xx-devkit.dtb",
- },
- },
- {
- {
- .name = "DM37xx SOM LV",
- .fdtfile = "logicpd-som-lv-37xx-devkit.dtb",
- },
- {
- .name = "DM37xx Torpedo",
- .fdtfile = "logicpd-torpedo-37xx-devkit.dtb",
- },
- },
-};
-
#ifdef CONFIG_SPL_OS_BOOT
int spl_start_uboot(void)
{
@@ -226,7 +192,6 @@ int ehci_hcd_stop(int index)
#endif /* CONFIG_USB_EHCI_HCD */
-
/*
* Routine: misc_init_r
* Description: Configure board specific parts
@@ -243,11 +208,6 @@ int misc_init_r(void)
return 0;
}
-/*
- * BOARD_ID_GPIO - GPIO of pin with optional pulldown resistor on SOM LV
- */
-#define BOARD_ID_GPIO 189 /* hsusb0_data5 pin */
-
/*
* Routine: board_init
* Description: Early hardware init.
@@ -275,54 +235,6 @@ static void unlock_nand(void)
int board_late_init(void)
{
- struct board_id *board;
- unsigned int val;
-
- /*
- * To identify between a SOM LV and Torpedo module,
- * a pulldown resistor is on hsusb0_data5 for the SOM LV module.
- * Drive the pin (and let it soak), then read it back.
- * If the pin is still high its a Torpedo. If low its a SOM LV
- */
-
- /* Mux hsusb0_data5 as a GPIO */
- MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M4));
-
- if (gpio_request(BOARD_ID_GPIO, "husb0_data5.gpio_189") == 0) {
-
- /*
- * Drive BOARD_ID_GPIO - the pulldown resistor on the SOM LV
- * will drain the voltage.
- */
- gpio_direction_output(BOARD_ID_GPIO, 0);
- gpio_set_value(BOARD_ID_GPIO, 1);
-
- /* Let it soak for a bit */
- sdelay(0x100);
-
- /*
- * Read state of BOARD_ID_GPIO as an input and if its set.
- * If so the board is a Torpedo
- */
- gpio_direction_input(BOARD_ID_GPIO);
- val = gpio_get_value(BOARD_ID_GPIO);
- gpio_free(BOARD_ID_GPIO);
-
- board = &boards[!!(get_cpu_family() == CPU_OMAP36XX)][!!val];
- printf("Board: %s\n", board->name);
-
- /* Set the machine_id passed to Linux */
- if (board->machine_id)
- gd->bd->bi_arch_number = board->machine_id;
-
- /* If the user has not set fdtimage, set the default */
- if (!env_get("fdtimage"))
- env_set("fdtimage", board->fdtfile);
- }
-
- /* restore hsusb0_data5 pin as hsusb0_data5 */
- MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0));
-
#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
unlock_nand();
#endif
@@ -356,5 +268,3 @@ int board_eth_init(bd_t *bis)
return smc911x_initialize(0, CONFIG_SMC911X_BASE);
}
#endif
-
-
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index 2cbdbebb26..8644e16830 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -116,6 +116,7 @@
"ip=${ipaddr}:${tftpserver}:${gatewayip}:${netmask}::eth0:off\0" \
"nfsrootpath=/opt/nfs-exports/omap\0" \
"autoload=no\0" \
+ "fdtimage=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
"loadfdt=mmc rescan; " \
"load mmc ${mmcdev} ${fdtaddr} ${fdtimage}\0" \
"mmcbootcommon=echo Booting with DT from mmc${mmcdev} ...; " \
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread* [U-Boot] [U-Boot, 1/5] ARM: DTS: LogicPD-SOM-LV & Torpedo: Resync DTS with Kernel
2018-09-29 19:10 [U-Boot] [PATCH 1/5] ARM: DTS: LogicPD-SOM-LV & Torpedo: Resync DTS with Kernel Adam Ford
` (3 preceding siblings ...)
2018-09-29 19:10 ` [U-Boot] [PATCH 5/5] ARM: LogicPD: omap3logic: Remove Torpedo/SOM-LV autodection Adam Ford
@ 2018-10-07 0:29 ` Tom Rini
4 siblings, 0 replies; 10+ messages in thread
From: Tom Rini @ 2018-10-07 0:29 UTC (permalink / raw)
To: u-boot
On Sat, Sep 29, 2018 at 02:10:15PM -0500, Adam Ford wrote:
> The device tree entries are from linux-omap's for-next branch
> destined to me put into 4.20 (or whatever the version is after 4.19)
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
>
> diff --git a/arch/arm/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/dts/logicpd-som-lv-37xx-devkit.dts
> index 2428373952..2aca9111c6 100644
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20181006/709009a5/attachment.sig>
^ permalink raw reply [flat|nested] 10+ messages in thread