* [PATCH v1 1/8] ARM: tegra: fix simple-panel compatibles
2018-10-09 15:25 [PATCH v1 0/8] ARM: dts: tegra: last minute fixes Marcel Ziswiler
@ 2018-10-09 15:25 ` Marcel Ziswiler
2018-10-09 15:25 ` [PATCH v1 2/8] ARM: tegra: apalis-tk1/colibri_t20/t30: eval/iris: fix regulator gpio enable Marcel Ziswiler
` (6 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Marcel Ziswiler @ 2018-10-09 15:25 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
As there is no such thing as a generic simple-panel compatible remove
them.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
Changes in v1:
- Remove simple-panel compatible as suggested by Rob.
arch/arm/boot/dts/tegra114-dalmore.dts | 3 +--
arch/arm/boot/dts/tegra124-venice2.dts | 2 +-
arch/arm/boot/dts/tegra20-colibri-eval-v3.dts | 2 +-
arch/arm/boot/dts/tegra20-colibri-iris.dts | 2 +-
arch/arm/boot/dts/tegra20-harmony.dts | 2 +-
arch/arm/boot/dts/tegra20-medcom-wide.dts | 2 +-
arch/arm/boot/dts/tegra20-paz00.dts | 2 +-
arch/arm/boot/dts/tegra20-seaboard.dts | 2 +-
arch/arm/boot/dts/tegra20-ventana.dts | 2 +-
arch/arm/boot/dts/tegra30-apalis-eval.dts | 2 +-
arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts | 2 +-
arch/arm/boot/dts/tegra30-cardhu.dtsi | 2 +-
arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 2 +-
13 files changed, 13 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 1788556b4977..2ea7236d9da6 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -46,8 +46,7 @@
avdd-dsi-csi-supply = <&avdd_1v2_reg>;
panel@0 {
- compatible = "panasonic,vvx10f004b00",
- "simple-panel";
+ compatible = "panasonic,vvx10f004b00";
reg = <0>;
power-supply = <&avdd_lcd_reg>;
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 82d139648ef1..f54f77902774 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -1079,7 +1079,7 @@
};
panel: panel {
- compatible = "lg,lp129qe", "simple-panel";
+ compatible = "lg,lp129qe";
backlight = <&backlight>;
ddc-i2c-bus = <&dpaux>;
diff --git a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
index 3c0f2681fcde..37ad508b61d9 100644
--- a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
@@ -223,7 +223,7 @@
* edt,et057090dhu: EDT 5.7" LCD TFT
* edt,et070080dh6: EDT 7.0" LCD TFT
*/
- compatible = "edt,et057090dhu", "simple-panel";
+ compatible = "edt,et057090dhu";
backlight = <&backlight>;
power-supply = <®_3v3>;
};
diff --git a/arch/arm/boot/dts/tegra20-colibri-iris.dts b/arch/arm/boot/dts/tegra20-colibri-iris.dts
index d8004d68efa0..af4740847769 100644
--- a/arch/arm/boot/dts/tegra20-colibri-iris.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-iris.dts
@@ -205,7 +205,7 @@
* edt,et057090dhu: EDT 5.7" LCD TFT
* edt,et070080dh6: EDT 7.0" LCD TFT
*/
- compatible = "edt,et057090dhu", "simple-panel";
+ compatible = "edt,et057090dhu";
backlight = <&backlight>;
power-supply = <®_3v3>;
};
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index 1d96d92b72a7..02cd67ea2503 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -665,7 +665,7 @@
};
panel: panel {
- compatible = "auo,b101aw03", "simple-panel";
+ compatible = "auo,b101aw03";
power-supply = <&vdd_pnl_reg>;
enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts
index cda5448c2ace..c73510cd501c 100644
--- a/arch/arm/boot/dts/tegra20-medcom-wide.dts
+++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts
@@ -57,7 +57,7 @@
};
panel: panel {
- compatible = "innolux,n156bge-l21", "simple-panel";
+ compatible = "innolux,n156bge-l21";
power-supply = <&vdd_1v8_reg>, <&vdd_3v3_reg>;
enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index 8861e0976e37..e75f86901dfd 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -543,7 +543,7 @@
};
panel: panel {
- compatible = "samsung,ltn101nt05", "simple-panel";
+ compatible = "samsung,ltn101nt05";
ddc-i2c-bus = <&lvds_ddc>;
power-supply = <&vdd_pnl_reg>;
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index f91441683aad..376ecb6435f4 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -826,7 +826,7 @@
};
panel: panel {
- compatible = "chunghwa,claa101wa01a", "simple-panel";
+ compatible = "chunghwa,claa101wa01a";
power-supply = <&vdd_pnl_reg>;
enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index f44551e2d9d0..022649119821 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -611,7 +611,7 @@
};
panel: panel {
- compatible = "chunghwa,claa101wa01a", "simple-panel";
+ compatible = "chunghwa,claa101wa01a";
power-supply = <&vdd_pnl_reg>;
enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts
index 749fc6d1ff70..b39c26806bf2 100644
--- a/arch/arm/boot/dts/tegra30-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts
@@ -195,7 +195,7 @@
* edt,et057090dhu: EDT 5.7" LCD TFT
* edt,et070080dh6: EDT 7.0" LCD TFT
*/
- compatible = "edt,et057090dhu", "simple-panel";
+ compatible = "edt,et057090dhu";
backlight = <&backlight>;
power-supply = <®_3v3>;
};
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
index 0be50e881684..e29dca92ba0a 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
@@ -196,7 +196,7 @@
* edt,et057090dhu: EDT 5.7" LCD TFT
* edt,et070080dh6: EDT 7.0" LCD TFT
*/
- compatible = "edt,et057090dhu", "simple-panel";
+ compatible = "edt,et057090dhu";
backlight = <&backlight>;
power-supply = <®_3v3>;
};
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index fb9222b479d2..3894bf47ea8f 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -432,7 +432,7 @@
};
panel: panel {
- compatible = "chunghwa,claa101wb01", "simple-panel";
+ compatible = "chunghwa,claa101wb01";
ddc-i2c-bus = <&panelddc>;
power-supply = <&vdd_pnl1_reg>;
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 5965150ecdd2..8e106e784dce 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -159,7 +159,7 @@
* edt,et057090dhu: EDT 5.7" LCD TFT
* edt,et070080dh6: EDT 7.0" LCD TFT
*/
- compatible = "edt,et057090dhu", "simple-panel";
+ compatible = "edt,et057090dhu";
backlight = <&backlight>;
power-supply = <®_3v3>;
};
--
2.14.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v1 2/8] ARM: tegra: apalis-tk1/colibri_t20/t30: eval/iris: fix regulator gpio enable
2018-10-09 15:25 [PATCH v1 0/8] ARM: dts: tegra: last minute fixes Marcel Ziswiler
2018-10-09 15:25 ` [PATCH v1 1/8] ARM: tegra: fix simple-panel compatibles Marcel Ziswiler
@ 2018-10-09 15:25 ` Marcel Ziswiler
2018-10-09 15:25 ` [PATCH v1 3/8] ARM: tegra: apalis/colibri_t30: fix hdmi regulator Marcel Ziswiler
` (5 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Marcel Ziswiler @ 2018-10-09 15:25 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Anything other than the default active-low would require the separate
property enable-active-high to be set. This gets rid of the following
warning during boot:
regulator-usbh-vbus GPIO handle specifies active low - ignored
resp.:
regulator-1v05-avdd-hdmi-pll GPIO handle specifies active low - ignored
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
Changes in v1: None
arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi | 2 +-
arch/arm/boot/dts/tegra124-apalis.dtsi | 2 +-
arch/arm/boot/dts/tegra20-colibri-eval-v3.dts | 2 +-
arch/arm/boot/dts/tegra20-colibri-iris.dts | 2 +-
arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
index 367eb8c86098..73a8e117a9b9 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
@@ -1948,7 +1948,7 @@
regulator-name = "+V1.05_AVDD_HDMI_PLL";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+ gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
vin-supply = <®_1v05_vdd>;
};
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 13c93cd507d8..3e3b347afe56 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -1978,7 +1978,7 @@
regulator-name = "+V1.05_AVDD_HDMI_PLL";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
- gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+ gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
vin-supply = <®_1v05_vdd>;
};
diff --git a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
index 37ad508b61d9..f1a85d930e61 100644
--- a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
@@ -256,7 +256,7 @@
regulator-name = "VCC_USB[1-4]";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
vin-supply = <®_5v0>;
};
};
diff --git a/arch/arm/boot/dts/tegra20-colibri-iris.dts b/arch/arm/boot/dts/tegra20-colibri-iris.dts
index af4740847769..e1e5ec5253fd 100644
--- a/arch/arm/boot/dts/tegra20-colibri-iris.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-iris.dts
@@ -238,7 +238,7 @@
regulator-name = "VCC_USB1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
vin-supply = <®_5v0>;
};
};
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 8e106e784dce..7e6bf4cdf322 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -192,7 +192,7 @@
regulator-name = "VCC_USB[1-4]";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
vin-supply = <®_5v0>;
};
};
--
2.14.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v1 3/8] ARM: tegra: apalis/colibri_t30: fix hdmi regulator
2018-10-09 15:25 [PATCH v1 0/8] ARM: dts: tegra: last minute fixes Marcel Ziswiler
2018-10-09 15:25 ` [PATCH v1 1/8] ARM: tegra: fix simple-panel compatibles Marcel Ziswiler
2018-10-09 15:25 ` [PATCH v1 2/8] ARM: tegra: apalis-tk1/colibri_t20/t30: eval/iris: fix regulator gpio enable Marcel Ziswiler
@ 2018-10-09 15:25 ` Marcel Ziswiler
2018-10-12 10:44 ` Jon Hunter
2018-10-09 15:25 ` [PATCH v1 4/8] ARM: tegra: colibri_t20: reorder pmic properties Marcel Ziswiler
` (4 subsequent siblings)
7 siblings, 1 reply; 13+ messages in thread
From: Marcel Ziswiler @ 2018-10-09 15:25 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Fix HDMI requiring two regulators being enabled by a single GPIO. Model
this using an intermediate reg_en_vdd_hdmi regulator being the
vin-supply of them other two. This fixes the display subsystem and gets
rid of the following error during boot:
reg-fixed-voltage: probe of regulator-3v3-avdd-hdmi failed with error -16
tegra-hdmi 54280000.hdmi: failed to get VDD regulator
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
Changes in v1: None
arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi | 16 ++++++++++++----
arch/arm/boot/dts/tegra30-apalis.dtsi | 16 ++++++++++++----
arch/arm/boot/dts/tegra30-colibri.dtsi | 16 ++++++++++++----
3 files changed, 36 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
index 02f8126481a2..065a24ac1052 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
@@ -1133,8 +1133,7 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
- vin-supply = <®_1v8_vio>;
+ vin-supply = <®_en_vdd_hdmi>;
};
reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
@@ -1143,8 +1142,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
- vin-supply = <®_module_3v3>;
+ vin-supply = <®_en_vdd_hdmi>;
};
reg_5v0_charge_pump: regulator-5v0-charge-pump {
@@ -1171,6 +1169,16 @@
regulator-always-on;
};
+ reg_en_vdd_hdmi: regulator-en-vdd-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "EN_VDD_HDMI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <®_module_3v3>;
+ };
+
sound {
compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
"nvidia,tegra-audio-sgtl5000";
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 7f112f192fe9..6727c5868425 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -1115,8 +1115,7 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
- vin-supply = <®_1v8_vio>;
+ vin-supply = <®_en_vdd_hdmi>;
};
reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
@@ -1125,8 +1124,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
- vin-supply = <®_module_3v3>;
+ vin-supply = <®_en_vdd_hdmi>;
};
reg_5v0_charge_pump: regulator-5v0-charge-pump {
@@ -1153,6 +1151,16 @@
regulator-always-on;
};
+ reg_en_vdd_hdmi: regulator-en-vdd-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "EN_VDD_HDMI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <®_module_3v3>;
+ };
+
sound {
compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
"nvidia,tegra-audio-sgtl5000";
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 35af03ca9e90..963f26071415 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -965,8 +965,7 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
- vin-supply = <®_1v8_vio>;
+ vin-supply = <®_en_vdd_hdmi>;
};
reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
@@ -975,8 +974,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
- vin-supply = <®_module_3v3>;
+ vin-supply = <®_en_vdd_hdmi>;
};
reg_5v0_charge_pump: regulator-5v0-charge-pump {
@@ -1012,6 +1010,16 @@
regulator-always-on;
};
+ reg_en_vdd_hdmi: regulator-en-vdd-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "EN_VDD_HDMI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <®_module_3v3>;
+ };
+
sound {
compatible = "toradex,tegra-audio-sgtl5000-colibri_t30",
"nvidia,tegra-audio-sgtl5000";
--
2.14.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH v1 3/8] ARM: tegra: apalis/colibri_t30: fix hdmi regulator
2018-10-09 15:25 ` [PATCH v1 3/8] ARM: tegra: apalis/colibri_t30: fix hdmi regulator Marcel Ziswiler
@ 2018-10-12 10:44 ` Jon Hunter
0 siblings, 0 replies; 13+ messages in thread
From: Jon Hunter @ 2018-10-12 10:44 UTC (permalink / raw)
To: Marcel Ziswiler, devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Rob Herring, Mark Rutland
On 09/10/18 16:25, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> Fix HDMI requiring two regulators being enabled by a single GPIO. Model
> this using an intermediate reg_en_vdd_hdmi regulator being the
> vin-supply of them other two. This fixes the display subsystem and gets
> rid of the following error during boot:
>
> reg-fixed-voltage: probe of regulator-3v3-avdd-hdmi failed with error -16
> tegra-hdmi 54280000.hdmi: failed to get VDD regulator
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> ---
>
> Changes in v1: None
>
> arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi | 16 ++++++++++++----
> arch/arm/boot/dts/tegra30-apalis.dtsi | 16 ++++++++++++----
> arch/arm/boot/dts/tegra30-colibri.dtsi | 16 ++++++++++++----
> 3 files changed, 36 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
> index 02f8126481a2..065a24ac1052 100644
> --- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
> +++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
> @@ -1133,8 +1133,7 @@
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> enable-active-high;
> - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> - vin-supply = <®_1v8_vio>;
> + vin-supply = <®_en_vdd_hdmi>;
> };
>
> reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
> @@ -1143,8 +1142,7 @@
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> enable-active-high;
> - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> - vin-supply = <®_module_3v3>;
> + vin-supply = <®_en_vdd_hdmi>;
> };
>
> reg_5v0_charge_pump: regulator-5v0-charge-pump {
> @@ -1171,6 +1169,16 @@
> regulator-always-on;
> };
>
> + reg_en_vdd_hdmi: regulator-en-vdd-hdmi {
> + compatible = "regulator-fixed";
> + regulator-name = "EN_VDD_HDMI";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + enable-active-high;
> + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> + vin-supply = <®_module_3v3>;
> + };
> +
> sound {
> compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
> "nvidia,tegra-audio-sgtl5000";
> diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
> index 7f112f192fe9..6727c5868425 100644
> --- a/arch/arm/boot/dts/tegra30-apalis.dtsi
> +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
> @@ -1115,8 +1115,7 @@
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> enable-active-high;
> - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> - vin-supply = <®_1v8_vio>;
> + vin-supply = <®_en_vdd_hdmi>;
> };
>
> reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
> @@ -1125,8 +1124,7 @@
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> enable-active-high;
> - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> - vin-supply = <®_module_3v3>;
> + vin-supply = <®_en_vdd_hdmi>;
> };
>
> reg_5v0_charge_pump: regulator-5v0-charge-pump {
> @@ -1153,6 +1151,16 @@
> regulator-always-on;
> };
>
> + reg_en_vdd_hdmi: regulator-en-vdd-hdmi {
> + compatible = "regulator-fixed";
> + regulator-name = "EN_VDD_HDMI";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + enable-active-high;
> + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> + vin-supply = <®_module_3v3>;
> + };
> +
> sound {
> compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
> "nvidia,tegra-audio-sgtl5000";
> diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
> index 35af03ca9e90..963f26071415 100644
> --- a/arch/arm/boot/dts/tegra30-colibri.dtsi
> +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
> @@ -965,8 +965,7 @@
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> enable-active-high;
> - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> - vin-supply = <®_1v8_vio>;
> + vin-supply = <®_en_vdd_hdmi>;
> };
>
> reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
> @@ -975,8 +974,7 @@
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> enable-active-high;
> - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> - vin-supply = <®_module_3v3>;
> + vin-supply = <®_en_vdd_hdmi>;
> };
>
> reg_5v0_charge_pump: regulator-5v0-charge-pump {
> @@ -1012,6 +1010,16 @@
> regulator-always-on;
> };
>
> + reg_en_vdd_hdmi: regulator-en-vdd-hdmi {
> + compatible = "regulator-fixed";
> + regulator-name = "EN_VDD_HDMI";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + enable-active-high;
> + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> + vin-supply = <®_module_3v3>;
> + };
> +
> sound {
> compatible = "toradex,tegra-audio-sgtl5000-colibri_t30",
> "nvidia,tegra-audio-sgtl5000";
>
Given Linus W's fix for the gpiolib [0], I am not convinced that this is
really better/needed.
Cheers
Jon
[0] https://lore.kernel.org/patchwork/patch/998354/
--
nvpublic
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [PATCH v1 3/8] ARM: tegra: apalis/colibri_t30: fix hdmi regulator
@ 2018-10-12 10:44 ` Jon Hunter
0 siblings, 0 replies; 13+ messages in thread
From: Jon Hunter @ 2018-10-12 10:44 UTC (permalink / raw)
To: Marcel Ziswiler, devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Rob Herring, Mark Rutland
On 09/10/18 16:25, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> Fix HDMI requiring two regulators being enabled by a single GPIO. Model
> this using an intermediate reg_en_vdd_hdmi regulator being the
> vin-supply of them other two. This fixes the display subsystem and gets
> rid of the following error during boot:
>
> reg-fixed-voltage: probe of regulator-3v3-avdd-hdmi failed with error -16
> tegra-hdmi 54280000.hdmi: failed to get VDD regulator
>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
>
> ---
>
> Changes in v1: None
>
> arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi | 16 ++++++++++++----
> arch/arm/boot/dts/tegra30-apalis.dtsi | 16 ++++++++++++----
> arch/arm/boot/dts/tegra30-colibri.dtsi | 16 ++++++++++++----
> 3 files changed, 36 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
> index 02f8126481a2..065a24ac1052 100644
> --- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
> +++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
> @@ -1133,8 +1133,7 @@
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> enable-active-high;
> - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> - vin-supply = <®_1v8_vio>;
> + vin-supply = <®_en_vdd_hdmi>;
> };
>
> reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
> @@ -1143,8 +1142,7 @@
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> enable-active-high;
> - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> - vin-supply = <®_module_3v3>;
> + vin-supply = <®_en_vdd_hdmi>;
> };
>
> reg_5v0_charge_pump: regulator-5v0-charge-pump {
> @@ -1171,6 +1169,16 @@
> regulator-always-on;
> };
>
> + reg_en_vdd_hdmi: regulator-en-vdd-hdmi {
> + compatible = "regulator-fixed";
> + regulator-name = "EN_VDD_HDMI";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + enable-active-high;
> + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> + vin-supply = <®_module_3v3>;
> + };
> +
> sound {
> compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
> "nvidia,tegra-audio-sgtl5000";
> diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
> index 7f112f192fe9..6727c5868425 100644
> --- a/arch/arm/boot/dts/tegra30-apalis.dtsi
> +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
> @@ -1115,8 +1115,7 @@
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> enable-active-high;
> - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> - vin-supply = <®_1v8_vio>;
> + vin-supply = <®_en_vdd_hdmi>;
> };
>
> reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
> @@ -1125,8 +1124,7 @@
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> enable-active-high;
> - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> - vin-supply = <®_module_3v3>;
> + vin-supply = <®_en_vdd_hdmi>;
> };
>
> reg_5v0_charge_pump: regulator-5v0-charge-pump {
> @@ -1153,6 +1151,16 @@
> regulator-always-on;
> };
>
> + reg_en_vdd_hdmi: regulator-en-vdd-hdmi {
> + compatible = "regulator-fixed";
> + regulator-name = "EN_VDD_HDMI";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + enable-active-high;
> + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> + vin-supply = <®_module_3v3>;
> + };
> +
> sound {
> compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
> "nvidia,tegra-audio-sgtl5000";
> diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
> index 35af03ca9e90..963f26071415 100644
> --- a/arch/arm/boot/dts/tegra30-colibri.dtsi
> +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
> @@ -965,8 +965,7 @@
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> enable-active-high;
> - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> - vin-supply = <®_1v8_vio>;
> + vin-supply = <®_en_vdd_hdmi>;
> };
>
> reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
> @@ -975,8 +974,7 @@
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> enable-active-high;
> - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> - vin-supply = <®_module_3v3>;
> + vin-supply = <®_en_vdd_hdmi>;
> };
>
> reg_5v0_charge_pump: regulator-5v0-charge-pump {
> @@ -1012,6 +1010,16 @@
> regulator-always-on;
> };
>
> + reg_en_vdd_hdmi: regulator-en-vdd-hdmi {
> + compatible = "regulator-fixed";
> + regulator-name = "EN_VDD_HDMI";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + enable-active-high;
> + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
> + vin-supply = <®_module_3v3>;
> + };
> +
> sound {
> compatible = "toradex,tegra-audio-sgtl5000-colibri_t30",
> "nvidia,tegra-audio-sgtl5000";
>
Given Linus W's fix for the gpiolib [0], I am not convinced that this is
really better/needed.
Cheers
Jon
[0] https://lore.kernel.org/patchwork/patch/998354/
--
nvpublic
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [PATCH v1 3/8] ARM: tegra: apalis/colibri_t30: fix hdmi regulator
2018-10-12 10:44 ` Jon Hunter
(?)
@ 2018-10-12 11:51 ` Marcel Ziswiler
-1 siblings, 0 replies; 13+ messages in thread
From: Marcel Ziswiler @ 2018-10-12 11:51 UTC (permalink / raw)
To: jonathanh, linux-kernel, linux-tegra, devicetree
Cc: mark.rutland, thierry.reding, robh+dt
On Fri, 2018-10-12 at 11:44 +0100, Jon Hunter wrote:
> On 09/10/18 16:25, Marcel Ziswiler wrote:
> > From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> > ...
> >
> Given Linus W's fix for the gpiolib [0], I am not convinced that this
> is
> really better/needed.
Being pragmatic at the end of the day I'm just happy if it works and I
may just drop this one then if nobody else sees any advantage.
After all there are still enough really broken things like audio on
Apalis TK1. Off to debug that one further... Argh, -EPROBE_DEFER!
> Cheers
> Jon
>
> [0] https://lore.kernel.org/patchwork/patch/998354/
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH v1 3/8] ARM: tegra: apalis/colibri_t30: fix hdmi regulator
2018-10-12 10:44 ` Jon Hunter
(?)
(?)
@ 2018-10-12 13:16 ` Marcel Ziswiler
-1 siblings, 0 replies; 13+ messages in thread
From: Marcel Ziswiler @ 2018-10-12 13:16 UTC (permalink / raw)
To: jonathanh, linux-kernel, linux-tegra, devicetree
Cc: mark.rutland, thierry.reding, robh+dt
On Fri, 2018-10-12 at 11:44 +0100, Jon Hunter wrote:
> On 09/10/18 16:25, Marcel Ziswiler wrote:
> > From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> > ...
> >
> Given Linus W's fix for the gpiolib [0], I am not convinced that this
> is
> really better/needed.
Looks like nobody else favours this (rather the opposite is the case it
seems [1]) so I will drop it in a v2. Thanks!
Any feedback about any of the other patches?
> Cheers
> Jon
>
> [0] https://lore.kernel.org/patchwork/patch/998354/
[1]
https://lore.kernel.org/lkml/20181012125911.GT30658@n2100.armlinux.org.
uk/
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v1 4/8] ARM: tegra: colibri_t20: reorder pmic properties
2018-10-09 15:25 [PATCH v1 0/8] ARM: dts: tegra: last minute fixes Marcel Ziswiler
` (2 preceding siblings ...)
2018-10-09 15:25 ` [PATCH v1 3/8] ARM: tegra: apalis/colibri_t30: fix hdmi regulator Marcel Ziswiler
@ 2018-10-09 15:25 ` Marcel Ziswiler
2018-10-09 15:25 ` [PATCH v1 5/8] ARM: tegra: apalis-tk1: further regulator clean-up Marcel Ziswiler
` (3 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Marcel Ziswiler @ 2018-10-09 15:25 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reorder PMIC properties to be more in-line with any of our other device
trees.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
Changes in v1: None
arch/arm/boot/dts/tegra20-colibri.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-colibri.dtsi b/arch/arm/boot/dts/tegra20-colibri.dtsi
index 6162d193e12c..d3aba6501510 100644
--- a/arch/arm/boot/dts/tegra20-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri.dtsi
@@ -475,11 +475,11 @@
pmic@34 {
compatible = "ti,tps6586x";
reg = <0x34>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- ti,system-power-controller;
#gpio-cells = <2>;
gpio-controller;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
sys-supply = <®_module_3v3>;
+ ti,system-power-controller;
vin-sm0-supply = <®_3v3_vsys>;
vin-sm1-supply = <®_3v3_vsys>;
vin-sm2-supply = <®_3v3_vsys>;
--
2.14.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v1 5/8] ARM: tegra: apalis-tk1: further regulator clean-up
2018-10-09 15:25 [PATCH v1 0/8] ARM: dts: tegra: last minute fixes Marcel Ziswiler
` (3 preceding siblings ...)
2018-10-09 15:25 ` [PATCH v1 4/8] ARM: tegra: colibri_t20: reorder pmic properties Marcel Ziswiler
@ 2018-10-09 15:25 ` Marcel Ziswiler
2018-10-09 15:25 ` [PATCH v1 6/8] ARM: tegra: apalis_t30/tk1: annotate power I2C being on-module Marcel Ziswiler
` (2 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Marcel Ziswiler @ 2018-10-09 15:25 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Add reg_ prefix to vddio_sdmmc1 and vddio_sdmmc3.
Reorder PMIC properties.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
Changes in v1: None
arch/arm/boot/dts/tegra124-apalis-eval.dts | 4 ++--
arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts | 4 ++--
arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi | 10 +++++-----
arch/arm/boot/dts/tegra124-apalis.dtsi | 10 +++++-----
4 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts
index eaee10ef6512..e553eff50499 100644
--- a/arch/arm/boot/dts/tegra124-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts
@@ -171,7 +171,7 @@
bus-width = <4>;
/* MMC1_CD# */
cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
- vqmmc-supply = <&vddio_sdmmc1>;
+ vqmmc-supply = <®_vddio_sdmmc1>;
};
/* Apalis SD1 */
@@ -180,7 +180,7 @@
bus-width = <4>;
/* SD1_CD# */
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
- vqmmc-supply = <&vddio_sdmmc3>;
+ vqmmc-supply = <®_vddio_sdmmc3>;
};
/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
index 7961eb4bd803..e2f94dc7ff91 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
@@ -137,7 +137,7 @@
bus-width = <4>;
/* MMC1_CD# */
cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
- vqmmc-supply = <&vddio_sdmmc1>;
+ vqmmc-supply = <®_vddio_sdmmc1>;
};
/* Apalis SD1 */
@@ -146,7 +146,7 @@
bus-width = <4>;
/* SD1_CD# */
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
- vqmmc-supply = <&vddio_sdmmc3>;
+ vqmmc-supply = <®_vddio_sdmmc3>;
};
/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
index 73a8e117a9b9..e532b564e4c9 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
@@ -1570,12 +1570,12 @@
pmic: pmic@40 {
compatible = "ams,as3722";
reg = <0x40>;
- interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
ams,system-power-controller;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
- gpio-controller;
- #gpio-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&as3722_default>;
@@ -1679,7 +1679,7 @@
ams,ext-control = <1>;
};
- vddio_sdmmc1: ldo1 {
+ reg_vddio_sdmmc1: ldo1 {
regulator-name = "VDDIO_SDMMC1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
@@ -1711,7 +1711,7 @@
/* LDO5 not used */
- vddio_sdmmc3: ldo6 {
+ reg_vddio_sdmmc3: ldo6 {
regulator-name = "VDDIO_SDMMC3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 3e3b347afe56..3cab9bda918f 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -1600,12 +1600,12 @@
pmic: pmic@40 {
compatible = "ams,as3722";
reg = <0x40>;
- interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
ams,system-power-controller;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
- gpio-controller;
- #gpio-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&as3722_default>;
@@ -1709,7 +1709,7 @@
ams,ext-control = <1>;
};
- vddio_sdmmc1: ldo1 {
+ reg_vddio_sdmmc1: ldo1 {
regulator-name = "VDDIO_SDMMC1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
@@ -1741,7 +1741,7 @@
/* LDO5 not used */
- vddio_sdmmc3: ldo6 {
+ reg_vddio_sdmmc3: ldo6 {
regulator-name = "VDDIO_SDMMC3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
--
2.14.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v1 6/8] ARM: tegra: apalis_t30/tk1: annotate power I2C being on-module
2018-10-09 15:25 [PATCH v1 0/8] ARM: dts: tegra: last minute fixes Marcel Ziswiler
` (4 preceding siblings ...)
2018-10-09 15:25 ` [PATCH v1 5/8] ARM: tegra: apalis-tk1: further regulator clean-up Marcel Ziswiler
@ 2018-10-09 15:25 ` Marcel Ziswiler
2018-10-09 15:25 ` [PATCH v1 7/8] ARM: tegra: colibri_t30: further regulator clean-up Marcel Ziswiler
2018-10-09 15:25 ` [PATCH v1 8/8] ARM: tegra: apalis_t30: " Marcel Ziswiler
7 siblings, 0 replies; 13+ messages in thread
From: Marcel Ziswiler @ 2018-10-09 15:25 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
The power I2C bus aka PWR_I2C which connects to the audio codec, PMIC,
temperature sensor and touch screen controller is really on-module only.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
Changes in v1: None
arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi | 5 ++++-
arch/arm/boot/dts/tegra124-apalis.dtsi | 5 ++++-
arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi | 2 +-
arch/arm/boot/dts/tegra30-apalis.dtsi | 2 +-
4 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
index e532b564e4c9..0d095729b46b 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
@@ -1552,7 +1552,10 @@
clock-frequency = <10000>;
};
- /* PWR_I2C: power I2C to audio codec, PMIC and temperature sensor */
+ /*
+ * PWR_I2C: power I2C to audio codec, PMIC and temperature sensor
+ * (On-module)
+ */
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 3cab9bda918f..13127415d86b 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -1582,7 +1582,10 @@
clock-frequency = <10000>;
};
- /* PWR_I2C: power I2C to audio codec, PMIC and temperature sensor */
+ /*
+ * PWR_I2C: power I2C to audio codec, PMIC and temperature sensor
+ * (On-module)
+ */
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
index 065a24ac1052..05e412a7ea17 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
@@ -845,7 +845,7 @@
/*
* PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
- * touch screen controller
+ * touch screen controller (On-module)
*/
i2c@7000d000 {
status = "okay";
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 6727c5868425..0f0d0ae93075 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -836,7 +836,7 @@
/*
* PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
- * touch screen controller
+ * touch screen controller (On-module)
*/
i2c@7000d000 {
status = "okay";
--
2.14.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v1 7/8] ARM: tegra: colibri_t30: further regulator clean-up
2018-10-09 15:25 [PATCH v1 0/8] ARM: dts: tegra: last minute fixes Marcel Ziswiler
` (5 preceding siblings ...)
2018-10-09 15:25 ` [PATCH v1 6/8] ARM: tegra: apalis_t30/tk1: annotate power I2C being on-module Marcel Ziswiler
@ 2018-10-09 15:25 ` Marcel Ziswiler
2018-10-09 15:25 ` [PATCH v1 8/8] ARM: tegra: apalis_t30: " Marcel Ziswiler
7 siblings, 0 replies; 13+ messages in thread
From: Marcel Ziswiler @ 2018-10-09 15:25 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Drop unused labels.
Rename regulator tps62362-vout to +V1.2_VDD_CORE.
Reorder TPS65911 properties.
Rename +V1.05 to +V1.05_AVDD_PLLE.
Add ti,en-ck32k-xtal.
Specify TPS62362 vin-supply.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
Changes in v1: None
arch/arm/boot/dts/tegra30-colibri.dtsi | 45 ++++++++++++++++------------------
1 file changed, 21 insertions(+), 24 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 963f26071415..d71038ea544f 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -732,16 +732,13 @@
pmic: pmic@2d {
compatible = "ti,tps65911";
reg = <0x2d>;
-
+ #gpio-cells = <2>;
+ gpio-controller;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
-
+ ti,en-ck32k-xtal;
ti,system-power-controller;
-
- #gpio-cells = <2>;
- gpio-controller;
-
vcc1-supply = <®_module_3v3>;
vcc2-supply = <®_module_3v3>;
vcc3-supply = <®_1v8_vio>;
@@ -752,29 +749,29 @@
vccio-supply = <®_module_3v3>;
regulators {
- vdd1_reg: vdd1 {
+ reg_1v8_vio: vio {
+ regulator-name = "+V1.8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vdd1 {
regulator-name = "+V1.35_VDDIO_DDR";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
};
- /* SW2: unused */
+ /* SW2 aka vdd2: unused */
- vddctrl_reg: vddctrl {
+ vddctrl {
regulator-name = "+V1.0_VDD_CPU";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
};
- reg_1v8_vio: vio {
- regulator-name = "+V1.8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
/* LDO1: unused */
/*
@@ -782,7 +779,7 @@
* +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
* see also +V3.3 fixed supply
*/
- ldo2_reg: ldo2 {
+ ldo2 {
regulator-name = "EN_+V3.3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -791,7 +788,7 @@
/* LDO3: unused */
- ldo4_reg: ldo4 {
+ ldo4 {
regulator-name = "+V1.2_VDD_RTC";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
@@ -802,7 +799,7 @@
* +V2.8_AVDD_VDAC:
* only required for (unsupported) analog RGB
*/
- ldo5_reg: ldo5 {
+ ldo5 {
regulator-name = "+V2.8_AVDD_VDAC";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
@@ -814,20 +811,20 @@
* but LDO6 can't set voltage in 50mV
* granularity
*/
- ldo6_reg: ldo6 {
+ ldo6 {
regulator-name = "+V1.05_AVDD_PLLE";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
- ldo7_reg: ldo7 {
+ ldo7 {
regulator-name = "+V1.2_AVDD_PLL";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- ldo8_reg: ldo8 {
+ ldo8 {
regulator-name = "+V1.0_VDD_DDR_HS";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
@@ -885,8 +882,7 @@
regulator@60 {
compatible = "ti,tps62362";
reg = <0x60>;
-
- regulator-name = "tps62362-vout";
+ regulator-name = "+V1.2_VDD_CORE";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-boot-on;
@@ -894,6 +890,7 @@
ti,vsel0-state-low;
/* VSEL1: EN_CORE_DVFS_N low for DVFS */
ti,vsel1-state-low;
+ vin-supply =<®_module_3v3>;
};
};
--
2.14.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v1 8/8] ARM: tegra: apalis_t30: further regulator clean-up
2018-10-09 15:25 [PATCH v1 0/8] ARM: dts: tegra: last minute fixes Marcel Ziswiler
` (6 preceding siblings ...)
2018-10-09 15:25 ` [PATCH v1 7/8] ARM: tegra: colibri_t30: further regulator clean-up Marcel Ziswiler
@ 2018-10-09 15:25 ` Marcel Ziswiler
7 siblings, 0 replies; 13+ messages in thread
From: Marcel Ziswiler @ 2018-10-09 15:25 UTC (permalink / raw)
To: devicetree, linux-tegra, linux-kernel
Cc: Marcel Ziswiler, Thierry Reding, Jonathan Hunter, Rob Herring,
Mark Rutland
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Rename label vdd2_reg to reg_1v05.
Rename label ldo6_reg to reg_1v05_avdd_plle.
Drop unused labels.
Rename regulator tps62362-vout to +V1.2_VDD_CORE.
Reorder TPS65911 properties.
Rename +V1.05 to +V1.05_AVDD_PLLE.
Add ti,en-ck32k-xtal.
Specify TPS62362 vin-supply.
Drop spurious newline in TPS62362 properties.
Rename vddio_sdmmc_1v8_reg to reg_1v8_vddio_sdmmc3.
Rename +V1.05 to +V1.05_AVDD_PLLE.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
Changes in v1: None
arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts | 2 +-
arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi | 70 +++++++++++---------------
arch/arm/boot/dts/tegra30-apalis.dtsi | 68 +++++++++++--------------
3 files changed, 58 insertions(+), 82 deletions(-)
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
index e29dca92ba0a..34c9fcd9198f 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
@@ -251,7 +251,7 @@
states = <1800000 0x0
3300000 0x1>;
startup-delay-us = <100000>;
- vin-supply = <&vddio_sdmmc_1v8_reg>;
+ vin-supply = <®_1v8_vddio_sdmmc3>;
};
};
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
index 05e412a7ea17..600680b5ae6c 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
@@ -13,14 +13,14 @@
pcie@3000 {
status = "okay";
- avdd-pexa-supply = <&vdd2_reg>;
- avdd-pexb-supply = <&vdd2_reg>;
- avdd-pex-pll-supply = <&vdd2_reg>;
- avdd-plle-supply = <&ldo6_reg>;
+ avdd-pexa-supply = <®_1v05>;
+ avdd-pexb-supply = <®_1v05>;
+ avdd-pex-pll-supply = <®_1v05>;
+ avdd-plle-supply = <®_1v05>;
hvdd-pex-supply = <®_module_3v3>;
vddio-pex-ctl-supply = <®_module_3v3>;
- vdd-pexa-supply = <&vdd2_reg>;
- vdd-pexb-supply = <&vdd2_reg>;
+ vdd-pexa-supply = <®_1v05>;
+ vdd-pexb-supply = <®_1v05>;
/* Apalis type specific */
pci@1,0 {
@@ -864,16 +864,13 @@
pmic: pmic@2d {
compatible = "ti,tps65911";
reg = <0x2d>;
-
+ #gpio-cells = <2>;
+ gpio-controller;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
-
+ ti,en-ck32k-xtal;
ti,system-power-controller;
-
- #gpio-cells = <2>;
- gpio-controller;
-
vcc1-supply = <®_module_3v3>;
vcc2-supply = <®_module_3v3>;
vcc3-supply = <®_1v8_vio>;
@@ -884,38 +881,38 @@
vccio-supply = <®_module_3v3>;
regulators {
- vdd1_reg: vdd1 {
+ reg_1v8_vio: vio {
+ regulator-name = "+V1.8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vdd1 {
regulator-name = "+V1.35_VDDIO_DDR";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
};
- vdd2_reg: vdd2 {
+ reg_1v05: vdd2 {
regulator-name = "+V1.05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
- vddctrl_reg: vddctrl {
+ vddctrl {
regulator-name = "+V1.0_VDD_CPU";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
};
- reg_1v8_vio: vio {
- regulator-name = "+V1.8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
/*
* 1.8 volt +VDDIO_SDMMC3 in case EN_+3.3_SDMMC3
* is off
*/
- vddio_sdmmc_1v8_reg: ldo1 {
+ reg_1v8_vddio_sdmmc3: ldo1 {
regulator-name = "+VDDIO_SDMMC3_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -927,20 +924,20 @@
* +V3.3_AUDIO_AVDD_S, +V3.3
* see also +V3.3 fixed supply
*/
- ldo2_reg: ldo2 {
+ ldo2 {
regulator-name = "EN_+V3.3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- ldo3_reg: ldo3 {
+ ldo3 {
regulator-name = "+V1.2_CSI";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
- ldo4_reg: ldo4 {
+ ldo4 {
regulator-name = "+V1.2_VDD_RTC";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
@@ -951,32 +948,23 @@
* +V2.8_AVDD_VDAC:
* only required for (unsupported) analog RGB
*/
- ldo5_reg: ldo5 {
+ ldo5 {
regulator-name = "+V2.8_AVDD_VDAC";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
- /*
- * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
- * but LDO6 can't set voltage in 50mV
- * granularity
- */
- ldo6_reg: ldo6 {
- regulator-name = "+V1.05_AVDD_PLLE";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- };
+ /* LDO6: unused */
- ldo7_reg: ldo7 {
+ ldo7 {
regulator-name = "+V1.2_AVDD_PLL";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- ldo8_reg: ldo8 {
+ ldo8 {
regulator-name = "+V1.0_VDD_DDR_HS";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
@@ -1034,8 +1022,7 @@
regulator@60 {
compatible = "ti,tps62362";
reg = <0x60>;
-
- regulator-name = "tps62362-vout";
+ regulator-name = "+V1.2_VDD_CORE";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-boot-on;
@@ -1043,6 +1030,7 @@
ti,vsel0-state-low;
/* VSEL1: EN_CORE_DVFS_N low for DVFS */
ti,vsel1-state-low;
+ vin-supply =<®_module_3v3>;
};
};
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 0f0d0ae93075..85f4b70ed73d 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -12,14 +12,14 @@
pcie@3000 {
status = "okay";
- avdd-pexa-supply = <&vdd2_reg>;
- avdd-pexb-supply = <&vdd2_reg>;
- avdd-pex-pll-supply = <&vdd2_reg>;
- avdd-plle-supply = <&ldo6_reg>;
+ avdd-pexa-supply = <®_1v05>;
+ avdd-pexb-supply = <®_1v05>;
+ avdd-pex-pll-supply = <®_1v05>;
+ avdd-plle-supply = <®_1v05>;
hvdd-pex-supply = <®_module_3v3>;
vddio-pex-ctl-supply = <®_module_3v3>;
- vdd-pexa-supply = <&vdd2_reg>;
- vdd-pexb-supply = <&vdd2_reg>;
+ vdd-pexa-supply = <®_1v05>;
+ vdd-pexb-supply = <®_1v05>;
/* Apalis type specific */
pci@1,0 {
@@ -855,16 +855,13 @@
pmic: pmic@2d {
compatible = "ti,tps65911";
reg = <0x2d>;
-
+ #gpio-cells = <2>;
+ gpio-controller;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;
-
+ ti,en-ck32k-xtal;
ti,system-power-controller;
-
- #gpio-cells = <2>;
- gpio-controller;
-
vcc1-supply = <®_module_3v3>;
vcc2-supply = <®_module_3v3>;
vcc3-supply = <®_1v8_vio>;
@@ -875,33 +872,33 @@
vccio-supply = <®_module_3v3>;
regulators {
- vdd1_reg: vdd1 {
+ reg_1v8_vio: vio {
+ regulator-name = "+V1.8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vdd1 {
regulator-name = "+V1.35_VDDIO_DDR";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
};
- vdd2_reg: vdd2 {
+ reg_1v05: vdd2 {
regulator-name = "+V1.05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
- vddctrl_reg: vddctrl {
+ vddctrl {
regulator-name = "+V1.0_VDD_CPU";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
};
- reg_1v8_vio: vio {
- regulator-name = "+V1.8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
/* LDO1: unused */
/*
@@ -909,20 +906,20 @@
* +V3.3_AUDIO_AVDD_S, +V3.3
* see also +V3.3 fixed supply
*/
- ldo2_reg: ldo2 {
+ ldo2 {
regulator-name = "EN_+V3.3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- ldo3_reg: ldo3 {
+ ldo3 {
regulator-name = "+V1.2_CSI";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
- ldo4_reg: ldo4 {
+ ldo4 {
regulator-name = "+V1.2_VDD_RTC";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
@@ -933,32 +930,23 @@
* +V2.8_AVDD_VDAC:
* only required for (unsupported) analog RGB
*/
- ldo5_reg: ldo5 {
+ ldo5 {
regulator-name = "+V2.8_AVDD_VDAC";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
- /*
- * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
- * but LDO6 can't set voltage in 50mV
- * granularity
- */
- ldo6_reg: ldo6 {
- regulator-name = "+V1.05_AVDD_PLLE";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- };
+ /* LDO6: unused */
- ldo7_reg: ldo7 {
+ ldo7 {
regulator-name = "+V1.2_AVDD_PLL";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- ldo8_reg: ldo8 {
+ ldo8 {
regulator-name = "+V1.0_VDD_DDR_HS";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
@@ -1016,8 +1004,7 @@
regulator@60 {
compatible = "ti,tps62362";
reg = <0x60>;
-
- regulator-name = "tps62362-vout";
+ regulator-name = "+V1.2_VDD_CORE";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1400000>;
regulator-boot-on;
@@ -1025,6 +1012,7 @@
ti,vsel0-state-low;
/* VSEL1: EN_CORE_DVFS_N low for DVFS */
ti,vsel1-state-low;
+ vin-supply =<®_module_3v3>;
};
};
--
2.14.4
^ permalink raw reply related [flat|nested] 13+ messages in thread