* [PATCH] selftests: bpf: install script with_addr.sh
@ 2018-10-10 14:27 ` anders.roxell
0 siblings, 0 replies; 9+ messages in thread
From: Anders Roxell @ 2018-10-10 14:27 UTC (permalink / raw)
To: ast, daniel, shuah; +Cc: netdev, linux-kernel, linux-kselftest, Anders Roxell
When test_flow_dissector.sh runs it complains that it can't find script
with_addr.sh:
./test_flow_dissector.sh: line 81: ./with_addr.sh: No such file or
directory
Rework so that with_addr.sh gets installed, add it to
TEST_PROGS_EXTENDED variable.
Fixes: 50b3ed57dee9 ("selftests/bpf: test bpf flow dissection")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
---
tools/testing/selftests/bpf/Makefile | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 1381ab81099c..efd108ff737d 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -51,6 +51,8 @@ TEST_PROGS := test_kmod.sh \
test_skb_cgroup_id.sh \
test_flow_dissector.sh
+TEST_PROGS_EXTENDED := with_addr.sh
+
# Compile but not part of 'make run_tests'
TEST_GEN_PROGS_EXTENDED = test_libbpf_open test_sock_addr test_skb_cgroup_id_user \
flow_dissector_load test_flow_dissector
--
2.19.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH] selftests: bpf: install script with_addr.sh
@ 2018-10-10 14:27 ` anders.roxell
0 siblings, 0 replies; 9+ messages in thread
From: Anders Roxell @ 2018-10-10 14:27 UTC (permalink / raw)
When test_flow_dissector.sh runs it complains that it can't find script
with_addr.sh:
./test_flow_dissector.sh: line 81: ./with_addr.sh: No such file or
directory
Rework so that with_addr.sh gets installed, add it to
TEST_PROGS_EXTENDED variable.
Fixes: 50b3ed57dee9 ("selftests/bpf: test bpf flow dissection")
Signed-off-by: Anders Roxell <anders.roxell at linaro.org>
---
tools/testing/selftests/bpf/Makefile | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 1381ab81099c..efd108ff737d 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -51,6 +51,8 @@ TEST_PROGS := test_kmod.sh \
test_skb_cgroup_id.sh \
test_flow_dissector.sh
+TEST_PROGS_EXTENDED := with_addr.sh
+
# Compile but not part of 'make run_tests'
TEST_GEN_PROGS_EXTENDED = test_libbpf_open test_sock_addr test_skb_cgroup_id_user \
flow_dissector_load test_flow_dissector
--
2.19.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH] selftests: bpf: install script with_addr.sh
@ 2018-10-10 14:27 ` anders.roxell
0 siblings, 0 replies; 9+ messages in thread
From: anders.roxell @ 2018-10-10 14:27 UTC (permalink / raw)
When test_flow_dissector.sh runs it complains that it can't find script
with_addr.sh:
./test_flow_dissector.sh: line 81: ./with_addr.sh: No such file or
directory
Rework so that with_addr.sh gets installed, add it to
TEST_PROGS_EXTENDED variable.
Fixes: 50b3ed57dee9 ("selftests/bpf: test bpf flow dissection")
Signed-off-by: Anders Roxell <anders.roxell at linaro.org>
---
tools/testing/selftests/bpf/Makefile | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 1381ab81099c..efd108ff737d 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -51,6 +51,8 @@ TEST_PROGS := test_kmod.sh \
test_skb_cgroup_id.sh \
test_flow_dissector.sh
+TEST_PROGS_EXTENDED := with_addr.sh
+
# Compile but not part of 'make run_tests'
TEST_GEN_PROGS_EXTENDED = test_libbpf_open test_sock_addr test_skb_cgroup_id_user \
flow_dissector_load test_flow_dissector
--
2.19.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH] selftests: bpf: install script with_addr.sh
2018-10-10 14:27 ` anders.roxell
(?)
@ 2018-10-10 16:07 ` liu.song.a23
-1 siblings, 0 replies; 9+ messages in thread
From: Song Liu @ 2018-10-10 16:07 UTC (permalink / raw)
To: Anders Roxell
Cc: Alexei Starovoitov, Daniel Borkmann, shuah, Networking,
open list, linux-kselftest
On Wed, Oct 10, 2018 at 7:28 AM Anders Roxell <anders.roxell@linaro.org> wrote:
>
> When test_flow_dissector.sh runs it complains that it can't find script
> with_addr.sh:
>
> ./test_flow_dissector.sh: line 81: ./with_addr.sh: No such file or
> directory
>
> Rework so that with_addr.sh gets installed, add it to
> TEST_PROGS_EXTENDED variable.
>
> Fixes: 50b3ed57dee9 ("selftests/bpf: test bpf flow dissection")
> Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Song Liu <songliubraving@fb.com>
> ---
> tools/testing/selftests/bpf/Makefile | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
> index 1381ab81099c..efd108ff737d 100644
> --- a/tools/testing/selftests/bpf/Makefile
> +++ b/tools/testing/selftests/bpf/Makefile
> @@ -51,6 +51,8 @@ TEST_PROGS := test_kmod.sh \
> test_skb_cgroup_id.sh \
> test_flow_dissector.sh
>
> +TEST_PROGS_EXTENDED := with_addr.sh
> +
> # Compile but not part of 'make run_tests'
> TEST_GEN_PROGS_EXTENDED = test_libbpf_open test_sock_addr test_skb_cgroup_id_user \
> flow_dissector_load test_flow_dissector
> --
> 2.19.1
>
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH] selftests: bpf: install script with_addr.sh
@ 2018-10-10 16:07 ` liu.song.a23
0 siblings, 0 replies; 9+ messages in thread
From: Song Liu @ 2018-10-10 16:07 UTC (permalink / raw)
On Wed, Oct 10, 2018@7:28 AM Anders Roxell <anders.roxell@linaro.org> wrote:
>
> When test_flow_dissector.sh runs it complains that it can't find script
> with_addr.sh:
>
> ./test_flow_dissector.sh: line 81: ./with_addr.sh: No such file or
> directory
>
> Rework so that with_addr.sh gets installed, add it to
> TEST_PROGS_EXTENDED variable.
>
> Fixes: 50b3ed57dee9 ("selftests/bpf: test bpf flow dissection")
> Signed-off-by: Anders Roxell <anders.roxell at linaro.org>
Acked-by: Song Liu <songliubraving at fb.com>
> ---
> tools/testing/selftests/bpf/Makefile | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
> index 1381ab81099c..efd108ff737d 100644
> --- a/tools/testing/selftests/bpf/Makefile
> +++ b/tools/testing/selftests/bpf/Makefile
> @@ -51,6 +51,8 @@ TEST_PROGS := test_kmod.sh \
> test_skb_cgroup_id.sh \
> test_flow_dissector.sh
>
> +TEST_PROGS_EXTENDED := with_addr.sh
> +
> # Compile but not part of 'make run_tests'
> TEST_GEN_PROGS_EXTENDED = test_libbpf_open test_sock_addr test_skb_cgroup_id_user \
> flow_dissector_load test_flow_dissector
> --
> 2.19.1
>
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH] selftests: bpf: install script with_addr.sh
@ 2018-10-10 16:07 ` liu.song.a23
0 siblings, 0 replies; 9+ messages in thread
From: liu.song.a23 @ 2018-10-10 16:07 UTC (permalink / raw)
On Wed, Oct 10, 2018 at 7:28 AM Anders Roxell <anders.roxell at linaro.org> wrote:
>
> When test_flow_dissector.sh runs it complains that it can't find script
> with_addr.sh:
>
> ./test_flow_dissector.sh: line 81: ./with_addr.sh: No such file or
> directory
>
> Rework so that with_addr.sh gets installed, add it to
> TEST_PROGS_EXTENDED variable.
>
> Fixes: 50b3ed57dee9 ("selftests/bpf: test bpf flow dissection")
> Signed-off-by: Anders Roxell <anders.roxell at linaro.org>
Acked-by: Song Liu <songliubraving at fb.com>
> ---
> tools/testing/selftests/bpf/Makefile | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
> index 1381ab81099c..efd108ff737d 100644
> --- a/tools/testing/selftests/bpf/Makefile
> +++ b/tools/testing/selftests/bpf/Makefile
> @@ -51,6 +51,8 @@ TEST_PROGS := test_kmod.sh \
> test_skb_cgroup_id.sh \
> test_flow_dissector.sh
>
> +TEST_PROGS_EXTENDED := with_addr.sh
> +
> # Compile but not part of 'make run_tests'
> TEST_GEN_PROGS_EXTENDED = test_libbpf_open test_sock_addr test_skb_cgroup_id_user \
> flow_dissector_load test_flow_dissector
> --
> 2.19.1
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] selftests: bpf: install script with_addr.sh
2018-10-10 14:27 ` anders.roxell
(?)
@ 2018-10-11 8:36 ` daniel
-1 siblings, 0 replies; 9+ messages in thread
From: Daniel Borkmann @ 2018-10-11 8:36 UTC (permalink / raw)
To: Anders Roxell, ast, shuah; +Cc: netdev, linux-kernel, linux-kselftest
On 10/10/2018 04:27 PM, Anders Roxell wrote:
> When test_flow_dissector.sh runs it complains that it can't find script
> with_addr.sh:
>
> ./test_flow_dissector.sh: line 81: ./with_addr.sh: No such file or
> directory
>
> Rework so that with_addr.sh gets installed, add it to
> TEST_PROGS_EXTENDED variable.
>
> Fixes: 50b3ed57dee9 ("selftests/bpf: test bpf flow dissection")
> Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Applied to bpf-next, thanks Anders!
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH] selftests: bpf: install script with_addr.sh
@ 2018-10-11 8:36 ` daniel
0 siblings, 0 replies; 9+ messages in thread
From: Daniel Borkmann @ 2018-10-11 8:36 UTC (permalink / raw)
On 10/10/2018 04:27 PM, Anders Roxell wrote:
> When test_flow_dissector.sh runs it complains that it can't find script
> with_addr.sh:
>
> ./test_flow_dissector.sh: line 81: ./with_addr.sh: No such file or
> directory
>
> Rework so that with_addr.sh gets installed, add it to
> TEST_PROGS_EXTENDED variable.
>
> Fixes: 50b3ed57dee9 ("selftests/bpf: test bpf flow dissection")
> Signed-off-by: Anders Roxell <anders.roxell at linaro.org>
Applied to bpf-next, thanks Anders!
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH] selftests: bpf: install script with_addr.sh
@ 2018-10-11 8:36 ` daniel
0 siblings, 0 replies; 9+ messages in thread
From: daniel @ 2018-10-11 8:36 UTC (permalink / raw)
On 10/10/2018 04:27 PM, Anders Roxell wrote:
> When test_flow_dissector.sh runs it complains that it can't find script
> with_addr.sh:
>
> ./test_flow_dissector.sh: line 81: ./with_addr.sh: No such file or
> directory
>
> Rework so that with_addr.sh gets installed, add it to
> TEST_PROGS_EXTENDED variable.
>
> Fixes: 50b3ed57dee9 ("selftests/bpf: test bpf flow dissection")
> Signed-off-by: Anders Roxell <anders.roxell at linaro.org>
Applied to bpf-next, thanks Anders!
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2018-10-11 8:36 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-10-10 14:27 [PATCH] selftests: bpf: install script with_addr.sh Anders Roxell
2018-10-10 14:27 ` Anders Roxell
2018-10-10 14:27 ` anders.roxell
2018-10-10 16:07 ` Song Liu
2018-10-10 16:07 ` Song Liu
2018-10-10 16:07 ` liu.song.a23
2018-10-11 8:36 ` Daniel Borkmann
2018-10-11 8:36 ` Daniel Borkmann
2018-10-11 8:36 ` daniel
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.