From: Dan Murphy <dmurphy@ti.com> To: robh+dt@kernel.org, jacek.anaszewski@gmail.com, pavel@ucw.cz Cc: lee.jones@linaro.org, tony@atomide.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org, Dan Murphy <dmurphy@ti.com> Subject: [PATCH v3 6/9] dt-bindings: ti-lmu: Remove LM3633 Date: Thu, 11 Oct 2018 11:51:20 -0500 [thread overview] Message-ID: <20181011165123.32198-7-dmurphy@ti.com> (raw) In-Reply-To: <20181011165123.32198-1-dmurphy@ti.com> Remove support for the LM3633 LED device from the ti-lmu. The LM3633 will be supported via a stand alone LED driver. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- .../devicetree/bindings/mfd/ti-lmu.txt | 48 ------------------- 1 file changed, 48 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt index 920f910be4e9..573e88578d3d 100644 --- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt +++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt @@ -7,7 +7,6 @@ TI LMU driver supports lighting devices below. LM3532 Backlight LM3631 Backlight and regulator LM3632 Backlight and regulator - LM3633 Backlight, LED and fault monitor LM3695 Backlight Required properties: @@ -15,12 +14,10 @@ Required properties: "ti,lm3532" "ti,lm3631" "ti,lm3632" - "ti,lm3633" "ti,lm3695" - reg: I2C slave address. 0x11 for LM3632 0x29 for LM3631 - 0x36 for LM3633 0x38 for LM3532 0x63 for LM3695 @@ -157,51 +154,6 @@ lm3632@11 { }; }; -lm3633@36 { - compatible = "ti,lm3633"; - reg = <0x36>; - - enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>; - - backlight { - compatible = "ti,lm3633-backlight"; - - main { - label = "main_lcd"; - led-sources = <1 2>; - ramp-up-msec = <500>; - ramp-down-msec = <500>; - }; - - front { - label = "front_lcd"; - led-sources = <0>; - ramp-up-msec = <1000>; - ramp-down-msec = <0>; - }; - }; - - leds { - compatible = "ti,lm3633-leds"; - - chan1 { - label = "status"; - led-sources = <1>; - led-max-microamp = <6000>; - }; - - chan345 { - label = "rgb"; - led-sources = <3 4 5>; - led-max-microamp = <10000>; - }; - }; - - fault-monitor { - compatible = "ti,lm3633-fault-monitor"; - }; -}; - lm3695@63 { compatible = "ti,lm3695"; reg = <0x63>; -- 2.19.0
WARNING: multiple messages have this Message-ID (diff)
From: Dan Murphy <dmurphy@ti.com> To: <robh+dt@kernel.org>, <jacek.anaszewski@gmail.com>, <pavel@ucw.cz> Cc: <lee.jones@linaro.org>, <tony@atomide.com>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-leds@vger.kernel.org>, Dan Murphy <dmurphy@ti.com> Subject: [PATCH v3 6/9] dt-bindings: ti-lmu: Remove LM3633 Date: Thu, 11 Oct 2018 11:51:20 -0500 [thread overview] Message-ID: <20181011165123.32198-7-dmurphy@ti.com> (raw) In-Reply-To: <20181011165123.32198-1-dmurphy@ti.com> Remove support for the LM3633 LED device from the ti-lmu. The LM3633 will be supported via a stand alone LED driver. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- .../devicetree/bindings/mfd/ti-lmu.txt | 48 ------------------- 1 file changed, 48 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt b/Documentation/devicetree/bindings/mfd/ti-lmu.txt index 920f910be4e9..573e88578d3d 100644 --- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt +++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt @@ -7,7 +7,6 @@ TI LMU driver supports lighting devices below. LM3532 Backlight LM3631 Backlight and regulator LM3632 Backlight and regulator - LM3633 Backlight, LED and fault monitor LM3695 Backlight Required properties: @@ -15,12 +14,10 @@ Required properties: "ti,lm3532" "ti,lm3631" "ti,lm3632" - "ti,lm3633" "ti,lm3695" - reg: I2C slave address. 0x11 for LM3632 0x29 for LM3631 - 0x36 for LM3633 0x38 for LM3532 0x63 for LM3695 @@ -157,51 +154,6 @@ lm3632@11 { }; }; -lm3633@36 { - compatible = "ti,lm3633"; - reg = <0x36>; - - enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>; - - backlight { - compatible = "ti,lm3633-backlight"; - - main { - label = "main_lcd"; - led-sources = <1 2>; - ramp-up-msec = <500>; - ramp-down-msec = <500>; - }; - - front { - label = "front_lcd"; - led-sources = <0>; - ramp-up-msec = <1000>; - ramp-down-msec = <0>; - }; - }; - - leds { - compatible = "ti,lm3633-leds"; - - chan1 { - label = "status"; - led-sources = <1>; - led-max-microamp = <6000>; - }; - - chan345 { - label = "rgb"; - led-sources = <3 4 5>; - led-max-microamp = <10000>; - }; - }; - - fault-monitor { - compatible = "ti,lm3633-fault-monitor"; - }; -}; - lm3695@63 { compatible = "ti,lm3695"; reg = <0x63>; -- 2.19.0
next prev parent reply other threads:[~2018-10-11 16:51 UTC|newest] Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-10-11 16:51 [PATCH v3 0/9] TI LMU common Framework Dan Murphy 2018-10-11 16:51 ` Dan Murphy 2018-10-11 16:51 ` [PATCH v3 1/9] leds: add TI LMU backlight driver Dan Murphy 2018-10-11 16:51 ` Dan Murphy 2018-10-11 16:51 ` [PATCH v3 2/9] dt-bindings: ti-lmu: Remove LM3697 Dan Murphy 2018-10-11 16:51 ` Dan Murphy 2018-10-11 18:27 ` Pavel Machek 2018-10-11 18:34 ` Dan Murphy 2018-10-11 18:34 ` Dan Murphy 2018-10-11 19:38 ` Jacek Anaszewski 2018-10-12 16:26 ` Rob Herring 2018-10-12 18:03 ` Pavel Machek 2018-10-13 18:45 ` Jacek Anaszewski 2018-10-15 0:56 ` Rob Herring 2018-10-15 19:13 ` Jacek Anaszewski 2018-10-15 19:14 ` Dan Murphy 2018-10-15 19:14 ` Dan Murphy 2018-10-15 21:45 ` Pavel Machek 2018-10-16 13:25 ` Dan Murphy 2018-10-16 13:25 ` Dan Murphy 2018-10-18 22:10 ` Pavel Machek 2018-10-19 11:42 ` Dan Murphy 2018-10-19 11:42 ` Dan Murphy 2018-10-19 14:58 ` Tony Lindgren 2018-10-24 8:55 ` Pavel Machek 2018-10-12 9:07 ` Lee Jones 2018-10-11 16:51 ` [PATCH v3 3/9] mfd: ti-lmu: Remove support for LM3697 Dan Murphy 2018-10-11 16:51 ` Dan Murphy 2018-10-11 16:51 ` [PATCH v3 4/9] dt-bindings: leds: Add bindings for lm3697 driver Dan Murphy 2018-10-11 16:51 ` Dan Murphy 2018-10-12 16:27 ` Rob Herring 2018-10-19 11:47 ` Dan Murphy 2018-10-19 11:47 ` Dan Murphy 2018-10-11 16:51 ` [PATCH v3 5/9] leds: lm3697: Introduce the " Dan Murphy 2018-10-11 16:51 ` Dan Murphy 2018-10-11 16:51 ` Dan Murphy [this message] 2018-10-11 16:51 ` [PATCH v3 6/9] dt-bindings: ti-lmu: Remove LM3633 Dan Murphy 2018-10-11 16:51 ` [PATCH v3 7/9] mfd: ti-lmu: Remove support for LM3633 Dan Murphy 2018-10-11 16:51 ` Dan Murphy 2018-10-11 16:51 ` [PATCH v3 8/9] dt-bindings: leds: Add support for the LM3633 Dan Murphy 2018-10-11 16:51 ` Dan Murphy 2018-10-11 16:51 ` [PATCH v3 9/9] leds: lm3633: Introduce the lm3633 driver Dan Murphy 2018-10-11 16:51 ` Dan Murphy
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20181011165123.32198-7-dmurphy@ti.com \ --to=dmurphy@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=jacek.anaszewski@gmail.com \ --cc=lee.jones@linaro.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-leds@vger.kernel.org \ --cc=pavel@ucw.cz \ --cc=robh+dt@kernel.org \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.