* [PATCH] Input: pm8941-pwrkey - Add pms405 pwrkey support
@ 2018-09-20 1:49 Bjorn Andersson
2018-10-18 5:24 ` Vinod
0 siblings, 1 reply; 4+ messages in thread
From: Bjorn Andersson @ 2018-09-20 1:49 UTC (permalink / raw)
To: Dmitry Torokhov, Rob Herring, Mark Rutland, Vinod Koul, Bjorn Andersson
Cc: linux-input, devicetree, linux-kernel
From: Vinod Koul <vkoul@kernel.org>
Update the binding and driver for pms405 pwrkey.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt | 1 +
drivers/input/misc/pm8941-pwrkey.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
index 34ab5763f494..736fba3bad54 100644
--- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
+++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
@@ -8,6 +8,7 @@ PROPERTIES
Definition: must be one of:
"qcom,pm8941-pwrkey"
"qcom,pm8941-resin"
+ "qcom,pms405-pwrkey"
- reg:
Usage: required
diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
index 48153e0ca19a..fccf63263c1c 100644
--- a/drivers/input/misc/pm8941-pwrkey.c
+++ b/drivers/input/misc/pm8941-pwrkey.c
@@ -317,6 +317,7 @@ static const struct pm8941_data resin_data = {
static const struct of_device_id pm8941_pwr_key_id_table[] = {
{ .compatible = "qcom,pm8941-pwrkey", .data = &pwrkey_data },
{ .compatible = "qcom,pm8941-resin", .data = &resin_data },
+ { .compatible = "qcom,pms405-pwrkey", .data = &pwrkey_data },
{ }
};
MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table);
--
2.18.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] Input: pm8941-pwrkey - Add pms405 pwrkey support
2018-09-20 1:49 [PATCH] Input: pm8941-pwrkey - Add pms405 pwrkey support Bjorn Andersson
@ 2018-10-18 5:24 ` Vinod
2018-10-19 0:01 ` Dmitry Torokhov
0 siblings, 1 reply; 4+ messages in thread
From: Vinod @ 2018-10-18 5:24 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Dmitry Torokhov, Rob Herring, Mark Rutland, linux-input,
devicetree, linux-kernel
On 19-09-18, 18:49, Bjorn Andersson wrote:
> From: Vinod Koul <vkoul@kernel.org>
>
> Update the binding and driver for pms405 pwrkey.
Rob, Dmitry
Gentle reminder for this patch...
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
> Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt | 1 +
> drivers/input/misc/pm8941-pwrkey.c | 1 +
> 2 files changed, 2 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> index 34ab5763f494..736fba3bad54 100644
> --- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> +++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> @@ -8,6 +8,7 @@ PROPERTIES
> Definition: must be one of:
> "qcom,pm8941-pwrkey"
> "qcom,pm8941-resin"
> + "qcom,pms405-pwrkey"
>
> - reg:
> Usage: required
> diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
> index 48153e0ca19a..fccf63263c1c 100644
> --- a/drivers/input/misc/pm8941-pwrkey.c
> +++ b/drivers/input/misc/pm8941-pwrkey.c
> @@ -317,6 +317,7 @@ static const struct pm8941_data resin_data = {
> static const struct of_device_id pm8941_pwr_key_id_table[] = {
> { .compatible = "qcom,pm8941-pwrkey", .data = &pwrkey_data },
> { .compatible = "qcom,pm8941-resin", .data = &resin_data },
> + { .compatible = "qcom,pms405-pwrkey", .data = &pwrkey_data },
> { }
> };
> MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table);
> --
> 2.18.0
--
~Vinod
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] Input: pm8941-pwrkey - Add pms405 pwrkey support
2018-10-18 5:24 ` Vinod
@ 2018-10-19 0:01 ` Dmitry Torokhov
2018-10-19 9:05 ` Vinod
0 siblings, 1 reply; 4+ messages in thread
From: Dmitry Torokhov @ 2018-10-19 0:01 UTC (permalink / raw)
To: Vinod, Rob Herring
Cc: Bjorn Andersson, Mark Rutland, linux-input, devicetree, linux-kernel
On Thu, Oct 18, 2018 at 10:54:37AM +0530, Vinod wrote:
> On 19-09-18, 18:49, Bjorn Andersson wrote:
> > From: Vinod Koul <vkoul@kernel.org>
> >
> > Update the binding and driver for pms405 pwrkey.
>
> Rob, Dmitry
>
> Gentle reminder for this patch...
>
> > Signed-off-by: Vinod Koul <vkoul@kernel.org>
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > ---
> > Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt | 1 +
> > drivers/input/misc/pm8941-pwrkey.c | 1 +
> > 2 files changed, 2 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> > index 34ab5763f494..736fba3bad54 100644
> > --- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> > +++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> > @@ -8,6 +8,7 @@ PROPERTIES
> > Definition: must be one of:
> > "qcom,pm8941-pwrkey"
> > "qcom,pm8941-resin"
> > + "qcom,pms405-pwrkey"
> >
> > - reg:
> > Usage: required
> > diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
> > index 48153e0ca19a..fccf63263c1c 100644
> > --- a/drivers/input/misc/pm8941-pwrkey.c
> > +++ b/drivers/input/misc/pm8941-pwrkey.c
> > @@ -317,6 +317,7 @@ static const struct pm8941_data resin_data = {
> > static const struct of_device_id pm8941_pwr_key_id_table[] = {
> > { .compatible = "qcom,pm8941-pwrkey", .data = &pwrkey_data },
> > { .compatible = "qcom,pm8941-resin", .data = &resin_data },
> > + { .compatible = "qcom,pms405-pwrkey", .data = &pwrkey_data },
I am sure I asked this question before (in context of a different
driver), but why do we need this compatible if we already have
pm8941-pwrkey compatible? Isn't pms405-pwrkey compatible with
pm8941-pwrkey as far as power key block goes? In which cases do we need
new compatibles and when can we reuse existing ones? Rob?
Thanks.
--
Dmitry
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] Input: pm8941-pwrkey - Add pms405 pwrkey support
2018-10-19 0:01 ` Dmitry Torokhov
@ 2018-10-19 9:05 ` Vinod
0 siblings, 0 replies; 4+ messages in thread
From: Vinod @ 2018-10-19 9:05 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: Rob Herring, Bjorn Andersson, Mark Rutland, linux-input,
devicetree, linux-kernel
On 18-10-18, 17:01, Dmitry Torokhov wrote:
> On Thu, Oct 18, 2018 at 10:54:37AM +0530, Vinod wrote:
> > On 19-09-18, 18:49, Bjorn Andersson wrote:
> > > From: Vinod Koul <vkoul@kernel.org>
> > >
> > > Update the binding and driver for pms405 pwrkey.
> >
> > Rob, Dmitry
> >
> > Gentle reminder for this patch...
> >
> > > Signed-off-by: Vinod Koul <vkoul@kernel.org>
> > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > > ---
> > > Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt | 1 +
> > > drivers/input/misc/pm8941-pwrkey.c | 1 +
> > > 2 files changed, 2 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> > > index 34ab5763f494..736fba3bad54 100644
> > > --- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> > > +++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
> > > @@ -8,6 +8,7 @@ PROPERTIES
> > > Definition: must be one of:
> > > "qcom,pm8941-pwrkey"
> > > "qcom,pm8941-resin"
> > > + "qcom,pms405-pwrkey"
> > >
> > > - reg:
> > > Usage: required
> > > diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
> > > index 48153e0ca19a..fccf63263c1c 100644
> > > --- a/drivers/input/misc/pm8941-pwrkey.c
> > > +++ b/drivers/input/misc/pm8941-pwrkey.c
> > > @@ -317,6 +317,7 @@ static const struct pm8941_data resin_data = {
> > > static const struct of_device_id pm8941_pwr_key_id_table[] = {
> > > { .compatible = "qcom,pm8941-pwrkey", .data = &pwrkey_data },
> > > { .compatible = "qcom,pm8941-resin", .data = &resin_data },
> > > + { .compatible = "qcom,pms405-pwrkey", .data = &pwrkey_data },
>
> I am sure I asked this question before (in context of a different
> driver), but why do we need this compatible if we already have
> pm8941-pwrkey compatible? Isn't pms405-pwrkey compatible with
> pm8941-pwrkey as far as power key block goes? In which cases do we need
> new compatibles and when can we reuse existing ones? Rob?
Relooking I do think that reuse of pm8941-pwrkey is entirely feasible,
thanks for the suggestion. We can drop this and I will update DTS
--
~Vinod
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-10-19 9:06 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-09-20 1:49 [PATCH] Input: pm8941-pwrkey - Add pms405 pwrkey support Bjorn Andersson
2018-10-18 5:24 ` Vinod
2018-10-19 0:01 ` Dmitry Torokhov
2018-10-19 9:05 ` Vinod
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.