From: Pankaj Bansal <pankaj.bansal@nxp.com> To: "linux-arm-kernel@lists.infradead.org" <linux-arm-kernel@lists.infradead.org>, Shawn Guo <shawnguo@kernel.org>, Leo Li <leoyang.li@nxp.com>, Oliver Hartkopp <socketcan@hartkopp.net>, Marc Kleine-Budde <mkl@pengutronix.de>, "linux-can@vger.kernel.org" <linux-can@vger.kernel.org> Cc: Mark Rutland <mark.rutland@arm.com>, "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>, Pankaj Bansal <pankaj.bansal@nxp.com>, Rob Herring <robh+dt@kernel.org> Subject: [PATCH] arm64: dts: Add flexcan nodes in LX2160A Date: Wed, 24 Oct 2018 10:49:20 +0000 [thread overview] Message-ID: <20181024161509.14200-1-pankaj.bansal@nxp.com> (raw) The FlexCAN module in LX2160A is a communication controller implementing the CAN protocol according to the ISO 11898-1 standard and CAN 2.0 B protocol specifications. -Flexible mailboxes configurable to store 0 to 8, 16, 32 or 64 bytes data length -Each mailbox configurable as receive or transmit, all supporting standard and extended messages Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> --- Notes: This patch depends on below patches: [1] https://lore.kernel.org/patchwork/project/lkml/list/?series=369563 [2] https://patchwork.kernel.org/patch/10645287/ This patch is used by below patches: [1] https://www.spinics.net/lists/linux-can/msg00348.html .../boot/dts/freescale/fsl-lx2160a-qds.dts | 8 ++++++++ .../boot/dts/freescale/fsl-lx2160a-rdb.dts | 8 ++++++++ .../boot/dts/freescale/fsl-lx2160a.dtsi | 18 ++++++++++++++++++ 3 files changed, 34 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts index 99a22abbe725..8a0305a2b778 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts @@ -31,6 +31,14 @@ }; }; +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + &crypto { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts index 6481e5f20e69..f8c95fc6de27 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts @@ -31,6 +31,14 @@ }; }; +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + &crypto { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index 56f846c55812..23ea8776b55a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -566,6 +566,24 @@ status = "disabled"; }; + can0: can@2180000 { + compatible = "fsl,lx2160ar1-flexcan"; + reg = <0x0 0x2180000 0x0 0x10000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 7>, <&clockgen 4 7>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + can1: can@2190000 { + compatible = "fsl,lx2160ar1-flexcan"; + reg = <0x0 0x2190000 0x0 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 7>, <&clockgen 4 7>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + uart0: serial@21c0000 { compatible = "arm,sbsa-uart","arm,pl011"; reg = <0x0 0x21c0000 0x0 0x1000>; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: pankaj.bansal@nxp.com (Pankaj Bansal) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH] arm64: dts: Add flexcan nodes in LX2160A Date: Wed, 24 Oct 2018 10:49:20 +0000 [thread overview] Message-ID: <20181024161509.14200-1-pankaj.bansal@nxp.com> (raw) The FlexCAN module in LX2160A is a communication controller implementing the CAN protocol according to the ISO 11898-1 standard and CAN 2.0 B protocol specifications. -Flexible mailboxes configurable to store 0 to 8, 16, 32 or 64 bytes data length -Each mailbox configurable as receive or transmit, all supporting standard and extended messages Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> --- Notes: This patch depends on below patches: [1] https://lore.kernel.org/patchwork/project/lkml/list/?series=369563 [2] https://patchwork.kernel.org/patch/10645287/ This patch is used by below patches: [1] https://www.spinics.net/lists/linux-can/msg00348.html .../boot/dts/freescale/fsl-lx2160a-qds.dts | 8 ++++++++ .../boot/dts/freescale/fsl-lx2160a-rdb.dts | 8 ++++++++ .../boot/dts/freescale/fsl-lx2160a.dtsi | 18 ++++++++++++++++++ 3 files changed, 34 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts index 99a22abbe725..8a0305a2b778 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts @@ -31,6 +31,14 @@ }; }; +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + &crypto { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts index 6481e5f20e69..f8c95fc6de27 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts @@ -31,6 +31,14 @@ }; }; +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + &crypto { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index 56f846c55812..23ea8776b55a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -566,6 +566,24 @@ status = "disabled"; }; + can0: can at 2180000 { + compatible = "fsl,lx2160ar1-flexcan"; + reg = <0x0 0x2180000 0x0 0x10000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 7>, <&clockgen 4 7>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + can1: can at 2190000 { + compatible = "fsl,lx2160ar1-flexcan"; + reg = <0x0 0x2190000 0x0 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 7>, <&clockgen 4 7>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + uart0: serial at 21c0000 { compatible = "arm,sbsa-uart","arm,pl011"; reg = <0x0 0x21c0000 0x0 0x1000>; -- 2.17.1
next reply other threads:[~2018-10-24 10:49 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-10-24 10:49 Pankaj Bansal [this message] 2018-10-24 10:49 ` [PATCH] arm64: dts: Add flexcan nodes in LX2160A Pankaj Bansal 2018-11-04 8:34 ` Shawn Guo 2018-11-04 8:34 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20181024161509.14200-1-pankaj.bansal@nxp.com \ --to=pankaj.bansal@nxp.com \ --cc=devicetree@vger.kernel.org \ --cc=leoyang.li@nxp.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-can@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=mkl@pengutronix.de \ --cc=robh+dt@kernel.org \ --cc=shawnguo@kernel.org \ --cc=socketcan@hartkopp.net \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.