* [PATCH] mm/page_owner: use vmalloc instead of kmalloc
@ 2018-10-25 18:34 ` miles.chen
0 siblings, 0 replies; 15+ messages in thread
From: miles.chen @ 2018-10-25 18:34 UTC (permalink / raw)
To: Matthias Brugger
Cc: linux-kernel, linux-mm, wsd_upstream, linux-mediatek,
linux-arm-kernel, Miles Chen
From: Miles Chen <miles.chen@mediatek.com>
The kbuf used by page owner is allocated by kmalloc(),
which means it can use only normal memory and there might
be a "out of memory" issue when we're out of normal memory.
Use vmalloc() so we can also allocate kbuf from highmem
on 32bit kernel.
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
---
mm/page_owner.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/mm/page_owner.c b/mm/page_owner.c
index d80adfe702d3..7e6962adaa79 100644
--- a/mm/page_owner.c
+++ b/mm/page_owner.c
@@ -1,7 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include <linux/debugfs.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/bootmem.h>
#include <linux/stacktrace.h>
@@ -10,6 +9,7 @@
#include <linux/migrate.h>
#include <linux/stackdepot.h>
#include <linux/seq_file.h>
+#include <linux/vmalloc.h>
#include "internal.h"
@@ -351,7 +351,7 @@ print_page_owner(char __user *buf, size_t count, unsigned long pfn,
.skip = 0
};
- kbuf = kmalloc(count, GFP_KERNEL);
+ kbuf = vmalloc(count);
if (!kbuf)
return -ENOMEM;
@@ -397,11 +397,11 @@ print_page_owner(char __user *buf, size_t count, unsigned long pfn,
if (copy_to_user(buf, kbuf, ret))
ret = -EFAULT;
- kfree(kbuf);
+ vfree(kbuf);
return ret;
err:
- kfree(kbuf);
+ vfree(kbuf);
return -ENOMEM;
}
--
2.18.0
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH] mm/page_owner: use vmalloc instead of kmalloc
@ 2018-10-25 18:34 ` miles.chen
0 siblings, 0 replies; 15+ messages in thread
From: miles.chen @ 2018-10-25 18:34 UTC (permalink / raw)
To: Matthias Brugger
Cc: linux-kernel, linux-mm, wsd_upstream, linux-mediatek,
linux-arm-kernel, Miles Chen
From: Miles Chen <miles.chen@mediatek.com>
The kbuf used by page owner is allocated by kmalloc(),
which means it can use only normal memory and there might
be a "out of memory" issue when we're out of normal memory.
Use vmalloc() so we can also allocate kbuf from highmem
on 32bit kernel.
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
---
mm/page_owner.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/mm/page_owner.c b/mm/page_owner.c
index d80adfe702d3..7e6962adaa79 100644
--- a/mm/page_owner.c
+++ b/mm/page_owner.c
@@ -1,7 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include <linux/debugfs.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/bootmem.h>
#include <linux/stacktrace.h>
@@ -10,6 +9,7 @@
#include <linux/migrate.h>
#include <linux/stackdepot.h>
#include <linux/seq_file.h>
+#include <linux/vmalloc.h>
#include "internal.h"
@@ -351,7 +351,7 @@ print_page_owner(char __user *buf, size_t count, unsigned long pfn,
.skip = 0
};
- kbuf = kmalloc(count, GFP_KERNEL);
+ kbuf = vmalloc(count);
if (!kbuf)
return -ENOMEM;
@@ -397,11 +397,11 @@ print_page_owner(char __user *buf, size_t count, unsigned long pfn,
if (copy_to_user(buf, kbuf, ret))
ret = -EFAULT;
- kfree(kbuf);
+ vfree(kbuf);
return ret;
err:
- kfree(kbuf);
+ vfree(kbuf);
return -ENOMEM;
}
--
2.18.0
^ permalink raw reply related [flat|nested] 15+ messages in thread
* [PATCH] mm/page_owner: use vmalloc instead of kmalloc
@ 2018-10-25 18:34 ` miles.chen
0 siblings, 0 replies; 15+ messages in thread
From: miles.chen at mediatek.com @ 2018-10-25 18:34 UTC (permalink / raw)
To: linux-arm-kernel
From: Miles Chen <miles.chen@mediatek.com>
The kbuf used by page owner is allocated by kmalloc(),
which means it can use only normal memory and there might
be a "out of memory" issue when we're out of normal memory.
Use vmalloc() so we can also allocate kbuf from highmem
on 32bit kernel.
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
---
mm/page_owner.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/mm/page_owner.c b/mm/page_owner.c
index d80adfe702d3..7e6962adaa79 100644
--- a/mm/page_owner.c
+++ b/mm/page_owner.c
@@ -1,7 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
#include <linux/debugfs.h>
#include <linux/mm.h>
-#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/bootmem.h>
#include <linux/stacktrace.h>
@@ -10,6 +9,7 @@
#include <linux/migrate.h>
#include <linux/stackdepot.h>
#include <linux/seq_file.h>
+#include <linux/vmalloc.h>
#include "internal.h"
@@ -351,7 +351,7 @@ print_page_owner(char __user *buf, size_t count, unsigned long pfn,
.skip = 0
};
- kbuf = kmalloc(count, GFP_KERNEL);
+ kbuf = vmalloc(count);
if (!kbuf)
return -ENOMEM;
@@ -397,11 +397,11 @@ print_page_owner(char __user *buf, size_t count, unsigned long pfn,
if (copy_to_user(buf, kbuf, ret))
ret = -EFAULT;
- kfree(kbuf);
+ vfree(kbuf);
return ret;
err:
- kfree(kbuf);
+ vfree(kbuf);
return -ENOMEM;
}
--
2.18.0
^ permalink raw reply related [flat|nested] 15+ messages in thread
* Re: [PATCH] mm/page_owner: use vmalloc instead of kmalloc
2018-10-25 18:34 ` miles.chen
@ 2018-10-25 18:44 ` Joe Perches
-1 siblings, 0 replies; 15+ messages in thread
From: Joe Perches @ 2018-10-25 18:44 UTC (permalink / raw)
To: miles.chen, Matthias Brugger
Cc: linux-kernel, linux-mm, wsd_upstream, linux-mediatek, linux-arm-kernel
On Fri, 2018-10-26 at 02:34 +0800, miles.chen@mediatek.com wrote:
> From: Miles Chen <miles.chen@mediatek.com>
>
> The kbuf used by page owner is allocated by kmalloc(),
> which means it can use only normal memory and there might
> be a "out of memory" issue when we're out of normal memory.
>
> Use vmalloc() so we can also allocate kbuf from highmem
> on 32bit kernel.
If this is really necessary, using kvmalloc/kvfree would
be better as the vmalloc space is also limited.
> diff --git a/mm/page_owner.c b/mm/page_owner.c
[]
> @@ -1,7 +1,6 @@
> // SPDX-License-Identifier: GPL-2.0
> #include <linux/debugfs.h>
> #include <linux/mm.h>
> -#include <linux/slab.h>
> #include <linux/uaccess.h>
> #include <linux/bootmem.h>
> #include <linux/stacktrace.h>
> @@ -10,6 +9,7 @@
> #include <linux/migrate.h>
> #include <linux/stackdepot.h>
> #include <linux/seq_file.h>
> +#include <linux/vmalloc.h>
>
> #include "internal.h"
>
> @@ -351,7 +351,7 @@ print_page_owner(char __user *buf, size_t count, unsigned long pfn,
> .skip = 0
> };
>
> - kbuf = kmalloc(count, GFP_KERNEL);
> + kbuf = vmalloc(count);
> if (!kbuf)
> return -ENOMEM;
>
> @@ -397,11 +397,11 @@ print_page_owner(char __user *buf, size_t count, unsigned long pfn,
> if (copy_to_user(buf, kbuf, ret))
> ret = -EFAULT;
>
> - kfree(kbuf);
> + vfree(kbuf);
> return ret;
>
> err:
> - kfree(kbuf);
> + vfree(kbuf);
> return -ENOMEM;
> }
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH] mm/page_owner: use vmalloc instead of kmalloc
@ 2018-10-25 18:44 ` Joe Perches
0 siblings, 0 replies; 15+ messages in thread
From: Joe Perches @ 2018-10-25 18:44 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, 2018-10-26 at 02:34 +0800, miles.chen at mediatek.com wrote:
> From: Miles Chen <miles.chen@mediatek.com>
>
> The kbuf used by page owner is allocated by kmalloc(),
> which means it can use only normal memory and there might
> be a "out of memory" issue when we're out of normal memory.
>
> Use vmalloc() so we can also allocate kbuf from highmem
> on 32bit kernel.
If this is really necessary, using kvmalloc/kvfree would
be better as the vmalloc space is also limited.
> diff --git a/mm/page_owner.c b/mm/page_owner.c
[]
> @@ -1,7 +1,6 @@
> // SPDX-License-Identifier: GPL-2.0
> #include <linux/debugfs.h>
> #include <linux/mm.h>
> -#include <linux/slab.h>
> #include <linux/uaccess.h>
> #include <linux/bootmem.h>
> #include <linux/stacktrace.h>
> @@ -10,6 +9,7 @@
> #include <linux/migrate.h>
> #include <linux/stackdepot.h>
> #include <linux/seq_file.h>
> +#include <linux/vmalloc.h>
>
> #include "internal.h"
>
> @@ -351,7 +351,7 @@ print_page_owner(char __user *buf, size_t count, unsigned long pfn,
> .skip = 0
> };
>
> - kbuf = kmalloc(count, GFP_KERNEL);
> + kbuf = vmalloc(count);
> if (!kbuf)
> return -ENOMEM;
>
> @@ -397,11 +397,11 @@ print_page_owner(char __user *buf, size_t count, unsigned long pfn,
> if (copy_to_user(buf, kbuf, ret))
> ret = -EFAULT;
>
> - kfree(kbuf);
> + vfree(kbuf);
> return ret;
>
> err:
> - kfree(kbuf);
> + vfree(kbuf);
> return -ENOMEM;
> }
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH] mm/page_owner: use vmalloc instead of kmalloc
2018-10-25 18:34 ` miles.chen
@ 2018-10-25 19:27 ` Matthew Wilcox
-1 siblings, 0 replies; 15+ messages in thread
From: Matthew Wilcox @ 2018-10-25 19:27 UTC (permalink / raw)
To: miles.chen
Cc: Matthias Brugger, linux-kernel, linux-mm, wsd_upstream,
linux-mediatek, linux-arm-kernel
On Fri, Oct 26, 2018 at 02:34:41AM +0800, miles.chen@mediatek.com wrote:
> The kbuf used by page owner is allocated by kmalloc(),
> which means it can use only normal memory and there might
> be a "out of memory" issue when we're out of normal memory.
>
> Use vmalloc() so we can also allocate kbuf from highmem
> on 32bit kernel.
... hang on, there's a bigger problem here.
static const struct file_operations proc_page_owner_operations = {
.read = read_page_owner,
};
read_page_owner(struct file *file, char __user *buf, size_t count, loff_t *ppos)
{
...
return print_page_owner(buf, count, pfn, page,
page_owner, handle);
}
static ssize_t
print_page_owner(char __user *buf, size_t count, unsigned long pfn,
struct page *page, struct page_owner *page_owner,
depot_stack_handle_t handle)
{
...
kbuf = kmalloc(count, GFP_KERNEL);
So I can force the kernel to make an arbitrary size allocation, triggering
OOMs and forcing swapping if I can get a file handle to this file.
The only saving grace is that (a) this is a debugfs file and (b) it's
root-only (mode 0400). Nevertheless, I feel some clamping is called
for here. Do we really need to output more than 4kB worth of text here?
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH] mm/page_owner: use vmalloc instead of kmalloc
@ 2018-10-25 19:27 ` Matthew Wilcox
0 siblings, 0 replies; 15+ messages in thread
From: Matthew Wilcox @ 2018-10-25 19:27 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Oct 26, 2018 at 02:34:41AM +0800, miles.chen at mediatek.com wrote:
> The kbuf used by page owner is allocated by kmalloc(),
> which means it can use only normal memory and there might
> be a "out of memory" issue when we're out of normal memory.
>
> Use vmalloc() so we can also allocate kbuf from highmem
> on 32bit kernel.
... hang on, there's a bigger problem here.
static const struct file_operations proc_page_owner_operations = {
.read = read_page_owner,
};
read_page_owner(struct file *file, char __user *buf, size_t count, loff_t *ppos)
{
...
return print_page_owner(buf, count, pfn, page,
page_owner, handle);
}
static ssize_t
print_page_owner(char __user *buf, size_t count, unsigned long pfn,
struct page *page, struct page_owner *page_owner,
depot_stack_handle_t handle)
{
...
kbuf = kmalloc(count, GFP_KERNEL);
So I can force the kernel to make an arbitrary size allocation, triggering
OOMs and forcing swapping if I can get a file handle to this file.
The only saving grace is that (a) this is a debugfs file and (b) it's
root-only (mode 0400). Nevertheless, I feel some clamping is called
for here. Do we really need to output more than 4kB worth of text here?
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH] mm/page_owner: use vmalloc instead of kmalloc
2018-10-25 18:44 ` Joe Perches
(?)
@ 2018-10-26 8:01 ` Miles Chen
-1 siblings, 0 replies; 15+ messages in thread
From: Miles Chen @ 2018-10-26 8:01 UTC (permalink / raw)
To: Joe Perches
Cc: Matthias Brugger, linux-kernel, linux-mm, wsd_upstream,
linux-mediatek, linux-arm-kernel
On Thu, 2018-10-25 at 11:44 -0700, Joe Perches wrote:
> On Fri, 2018-10-26 at 02:34 +0800, miles.chen@mediatek.com wrote:
> > From: Miles Chen <miles.chen@mediatek.com>
> >
> > The kbuf used by page owner is allocated by kmalloc(),
> > which means it can use only normal memory and there might
> > be a "out of memory" issue when we're out of normal memory.
> >
> > Use vmalloc() so we can also allocate kbuf from highmem
> > on 32bit kernel.
>
> If this is really necessary, using kvmalloc/kvfree would
> be better as the vmalloc space is also limited.
thanks for the advise.
kvmalloc/kvfree is better here.
>
> > diff --git a/mm/page_owner.c b/mm/page_owner.c
> []
> > @@ -1,7 +1,6 @@
> > // SPDX-License-Identifier: GPL-2.0
> > #include <linux/debugfs.h>
> > #include <linux/mm.h>
> > -#include <linux/slab.h>
> > #include <linux/uaccess.h>
> > #include <linux/bootmem.h>
> > #include <linux/stacktrace.h>
> > @@ -10,6 +9,7 @@
> > #include <linux/migrate.h>
> > #include <linux/stackdepot.h>
> > #include <linux/seq_file.h>
> > +#include <linux/vmalloc.h>
> >
> > #include "internal.h"
> >
> > @@ -351,7 +351,7 @@ print_page_owner(char __user *buf, size_t count, unsigned long pfn,
> > .skip = 0
> > };
> >
> > - kbuf = kmalloc(count, GFP_KERNEL);
> > + kbuf = vmalloc(count);
> > if (!kbuf)
> > return -ENOMEM;
> >
> > @@ -397,11 +397,11 @@ print_page_owner(char __user *buf, size_t count, unsigned long pfn,
> > if (copy_to_user(buf, kbuf, ret))
> > ret = -EFAULT;
> >
> > - kfree(kbuf);
> > + vfree(kbuf);
> > return ret;
> >
> > err:
> > - kfree(kbuf);
> > + vfree(kbuf);
> > return -ENOMEM;
> > }
> >
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH] mm/page_owner: use vmalloc instead of kmalloc
@ 2018-10-26 8:01 ` Miles Chen
0 siblings, 0 replies; 15+ messages in thread
From: Miles Chen @ 2018-10-26 8:01 UTC (permalink / raw)
To: Joe Perches
Cc: Matthias Brugger, linux-kernel, linux-mm, wsd_upstream,
linux-mediatek, linux-arm-kernel
On Thu, 2018-10-25 at 11:44 -0700, Joe Perches wrote:
> On Fri, 2018-10-26 at 02:34 +0800, miles.chen@mediatek.com wrote:
> > From: Miles Chen <miles.chen@mediatek.com>
> >
> > The kbuf used by page owner is allocated by kmalloc(),
> > which means it can use only normal memory and there might
> > be a "out of memory" issue when we're out of normal memory.
> >
> > Use vmalloc() so we can also allocate kbuf from highmem
> > on 32bit kernel.
>
> If this is really necessary, using kvmalloc/kvfree would
> be better as the vmalloc space is also limited.
thanks for the advise.
kvmalloc/kvfree is better here.
>
> > diff --git a/mm/page_owner.c b/mm/page_owner.c
> []
> > @@ -1,7 +1,6 @@
> > // SPDX-License-Identifier: GPL-2.0
> > #include <linux/debugfs.h>
> > #include <linux/mm.h>
> > -#include <linux/slab.h>
> > #include <linux/uaccess.h>
> > #include <linux/bootmem.h>
> > #include <linux/stacktrace.h>
> > @@ -10,6 +9,7 @@
> > #include <linux/migrate.h>
> > #include <linux/stackdepot.h>
> > #include <linux/seq_file.h>
> > +#include <linux/vmalloc.h>
> >
> > #include "internal.h"
> >
> > @@ -351,7 +351,7 @@ print_page_owner(char __user *buf, size_t count, unsigned long pfn,
> > .skip = 0
> > };
> >
> > - kbuf = kmalloc(count, GFP_KERNEL);
> > + kbuf = vmalloc(count);
> > if (!kbuf)
> > return -ENOMEM;
> >
> > @@ -397,11 +397,11 @@ print_page_owner(char __user *buf, size_t count, unsigned long pfn,
> > if (copy_to_user(buf, kbuf, ret))
> > ret = -EFAULT;
> >
> > - kfree(kbuf);
> > + vfree(kbuf);
> > return ret;
> >
> > err:
> > - kfree(kbuf);
> > + vfree(kbuf);
> > return -ENOMEM;
> > }
> >
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH] mm/page_owner: use vmalloc instead of kmalloc
@ 2018-10-26 8:01 ` Miles Chen
0 siblings, 0 replies; 15+ messages in thread
From: Miles Chen @ 2018-10-26 8:01 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, 2018-10-25 at 11:44 -0700, Joe Perches wrote:
> On Fri, 2018-10-26 at 02:34 +0800, miles.chen at mediatek.com wrote:
> > From: Miles Chen <miles.chen@mediatek.com>
> >
> > The kbuf used by page owner is allocated by kmalloc(),
> > which means it can use only normal memory and there might
> > be a "out of memory" issue when we're out of normal memory.
> >
> > Use vmalloc() so we can also allocate kbuf from highmem
> > on 32bit kernel.
>
> If this is really necessary, using kvmalloc/kvfree would
> be better as the vmalloc space is also limited.
thanks for the advise.
kvmalloc/kvfree is better here.
>
> > diff --git a/mm/page_owner.c b/mm/page_owner.c
> []
> > @@ -1,7 +1,6 @@
> > // SPDX-License-Identifier: GPL-2.0
> > #include <linux/debugfs.h>
> > #include <linux/mm.h>
> > -#include <linux/slab.h>
> > #include <linux/uaccess.h>
> > #include <linux/bootmem.h>
> > #include <linux/stacktrace.h>
> > @@ -10,6 +9,7 @@
> > #include <linux/migrate.h>
> > #include <linux/stackdepot.h>
> > #include <linux/seq_file.h>
> > +#include <linux/vmalloc.h>
> >
> > #include "internal.h"
> >
> > @@ -351,7 +351,7 @@ print_page_owner(char __user *buf, size_t count, unsigned long pfn,
> > .skip = 0
> > };
> >
> > - kbuf = kmalloc(count, GFP_KERNEL);
> > + kbuf = vmalloc(count);
> > if (!kbuf)
> > return -ENOMEM;
> >
> > @@ -397,11 +397,11 @@ print_page_owner(char __user *buf, size_t count, unsigned long pfn,
> > if (copy_to_user(buf, kbuf, ret))
> > ret = -EFAULT;
> >
> > - kfree(kbuf);
> > + vfree(kbuf);
> > return ret;
> >
> > err:
> > - kfree(kbuf);
> > + vfree(kbuf);
> > return -ENOMEM;
> > }
> >
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH] mm/page_owner: use vmalloc instead of kmalloc
2018-10-25 19:27 ` Matthew Wilcox
(?)
@ 2018-10-26 8:50 ` Miles Chen
-1 siblings, 0 replies; 15+ messages in thread
From: Miles Chen @ 2018-10-26 8:50 UTC (permalink / raw)
To: Matthew Wilcox
Cc: Matthias Brugger, linux-kernel, linux-mm, wsd_upstream,
linux-mediatek, linux-arm-kernel
On Thu, 2018-10-25 at 12:27 -0700, Matthew Wilcox wrote:
> On Fri, Oct 26, 2018 at 02:34:41AM +0800, miles.chen@mediatek.com wrote:
> > The kbuf used by page owner is allocated by kmalloc(),
> > which means it can use only normal memory and there might
> > be a "out of memory" issue when we're out of normal memory.
> >
> > Use vmalloc() so we can also allocate kbuf from highmem
> > on 32bit kernel.
>
> ... hang on, there's a bigger problem here.
>
> static const struct file_operations proc_page_owner_operations = {
> .read = read_page_owner,
> };
>
> read_page_owner(struct file *file, char __user *buf, size_t count, loff_t *ppos)
> {
> ...
> return print_page_owner(buf, count, pfn, page,
> page_owner, handle);
> }
>
> static ssize_t
> print_page_owner(char __user *buf, size_t count, unsigned long pfn,
> struct page *page, struct page_owner *page_owner,
> depot_stack_handle_t handle)
> {mount -t debugfs none /sys/kernel/debug/
> ...
> kbuf = kmalloc(count, GFP_KERNEL);
>
> So I can force the kernel to make an arbitrary size allocation, triggering
> OOMs and forcing swapping if I can get a file handle to this file.
> The only saving grace is that (a) this is a debugfs file and (b) it's
> root-only (mode 0400). Nevertheless, I feel some clamping is called
> for here. Do we really need to output more than 4kB worth of text here?
>
I did a test on my device, the allocation count is 4096 and around 6xx
bytes are used each print_page_owner() is called. It looks like that
clamping the reading count to PAGE_SIZE is ok.
The following output from print_page_owner() is 660 bytes long, I think
PAGE_SIZE should be enough to print the information we need.
Page allocated via order 0, mask 0x6200ca(GFP_HIGHUSER_MOVABLE)
PFN 262199 type Movable Block 512 type Movable Flags 0x4003c(referenced|
uptodate|dirty|lru|swapbacked)
get_page_from_freelist+0x1580/0x1650
__alloc_pages_nodemask+0xcc/0xfa4
shmem_alloc_page+0xa4/0xc8
shmem_alloc_and_acct_page+0x138/0x2b8
shmem_getpage_gfp.isra.54+0x164/0xfc8
shmem_write_begin+0x84/0xcc
generic_perform_write+0xe8/0x210
__generic_file_write_iter+0x1d4/0x230
generic_file_write_iter+0x184/0x2e8
new_sync_write+0x144/0x1c4
vfs_write+0x194/0x278
ksys_write+0x64/0xd4
xwrite+0x34/0x84
do_copy+0xf4/0x168
flush_buffer+0x68/0xec
__gunzip+0x370/0x448
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH] mm/page_owner: use vmalloc instead of kmalloc
@ 2018-10-26 8:50 ` Miles Chen
0 siblings, 0 replies; 15+ messages in thread
From: Miles Chen @ 2018-10-26 8:50 UTC (permalink / raw)
To: Matthew Wilcox
Cc: Matthias Brugger, linux-kernel, linux-mm, wsd_upstream,
linux-mediatek, linux-arm-kernel
On Thu, 2018-10-25 at 12:27 -0700, Matthew Wilcox wrote:
> On Fri, Oct 26, 2018 at 02:34:41AM +0800, miles.chen@mediatek.com wrote:
> > The kbuf used by page owner is allocated by kmalloc(),
> > which means it can use only normal memory and there might
> > be a "out of memory" issue when we're out of normal memory.
> >
> > Use vmalloc() so we can also allocate kbuf from highmem
> > on 32bit kernel.
>
> ... hang on, there's a bigger problem here.
>
> static const struct file_operations proc_page_owner_operations = {
> .read = read_page_owner,
> };
>
> read_page_owner(struct file *file, char __user *buf, size_t count, loff_t *ppos)
> {
> ...
> return print_page_owner(buf, count, pfn, page,
> page_owner, handle);
> }
>
> static ssize_t
> print_page_owner(char __user *buf, size_t count, unsigned long pfn,
> struct page *page, struct page_owner *page_owner,
> depot_stack_handle_t handle)
> {mount -t debugfs none /sys/kernel/debug/
> ...
> kbuf = kmalloc(count, GFP_KERNEL);
>
> So I can force the kernel to make an arbitrary size allocation, triggering
> OOMs and forcing swapping if I can get a file handle to this file.
> The only saving grace is that (a) this is a debugfs file and (b) it's
> root-only (mode 0400). Nevertheless, I feel some clamping is called
> for here. Do we really need to output more than 4kB worth of text here?
>
I did a test on my device, the allocation count is 4096 and around 6xx
bytes are used each print_page_owner() is called. It looks like that
clamping the reading count to PAGE_SIZE is ok.
The following output from print_page_owner() is 660 bytes long, I think
PAGE_SIZE should be enough to print the information we need.
Page allocated via order 0, mask 0x6200ca(GFP_HIGHUSER_MOVABLE)
PFN 262199 type Movable Block 512 type Movable Flags 0x4003c(referenced|
uptodate|dirty|lru|swapbacked)
get_page_from_freelist+0x1580/0x1650
__alloc_pages_nodemask+0xcc/0xfa4
shmem_alloc_page+0xa4/0xc8
shmem_alloc_and_acct_page+0x138/0x2b8
shmem_getpage_gfp.isra.54+0x164/0xfc8
shmem_write_begin+0x84/0xcc
generic_perform_write+0xe8/0x210
__generic_file_write_iter+0x1d4/0x230
generic_file_write_iter+0x184/0x2e8
new_sync_write+0x144/0x1c4
vfs_write+0x194/0x278
ksys_write+0x64/0xd4
xwrite+0x34/0x84
do_copy+0xf4/0x168
flush_buffer+0x68/0xec
__gunzip+0x370/0x448
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH] mm/page_owner: use vmalloc instead of kmalloc
@ 2018-10-26 8:50 ` Miles Chen
0 siblings, 0 replies; 15+ messages in thread
From: Miles Chen @ 2018-10-26 8:50 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, 2018-10-25 at 12:27 -0700, Matthew Wilcox wrote:
> On Fri, Oct 26, 2018 at 02:34:41AM +0800, miles.chen at mediatek.com wrote:
> > The kbuf used by page owner is allocated by kmalloc(),
> > which means it can use only normal memory and there might
> > be a "out of memory" issue when we're out of normal memory.
> >
> > Use vmalloc() so we can also allocate kbuf from highmem
> > on 32bit kernel.
>
> ... hang on, there's a bigger problem here.
>
> static const struct file_operations proc_page_owner_operations = {
> .read = read_page_owner,
> };
>
> read_page_owner(struct file *file, char __user *buf, size_t count, loff_t *ppos)
> {
> ...
> return print_page_owner(buf, count, pfn, page,
> page_owner, handle);
> }
>
> static ssize_t
> print_page_owner(char __user *buf, size_t count, unsigned long pfn,
> struct page *page, struct page_owner *page_owner,
> depot_stack_handle_t handle)
> {mount -t debugfs none /sys/kernel/debug/
> ...
> kbuf = kmalloc(count, GFP_KERNEL);
>
> So I can force the kernel to make an arbitrary size allocation, triggering
> OOMs and forcing swapping if I can get a file handle to this file.
> The only saving grace is that (a) this is a debugfs file and (b) it's
> root-only (mode 0400). Nevertheless, I feel some clamping is called
> for here. Do we really need to output more than 4kB worth of text here?
>
I did a test on my device, the allocation count is 4096 and around 6xx
bytes are used each print_page_owner() is called. It looks like that
clamping the reading count to PAGE_SIZE is ok.
The following output from print_page_owner() is 660 bytes long, I think
PAGE_SIZE should be enough to print the information we need.
Page allocated via order 0, mask 0x6200ca(GFP_HIGHUSER_MOVABLE)
PFN 262199 type Movable Block 512 type Movable Flags 0x4003c(referenced|
uptodate|dirty|lru|swapbacked)
get_page_from_freelist+0x1580/0x1650
__alloc_pages_nodemask+0xcc/0xfa4
shmem_alloc_page+0xa4/0xc8
shmem_alloc_and_acct_page+0x138/0x2b8
shmem_getpage_gfp.isra.54+0x164/0xfc8
shmem_write_begin+0x84/0xcc
generic_perform_write+0xe8/0x210
__generic_file_write_iter+0x1d4/0x230
generic_file_write_iter+0x184/0x2e8
new_sync_write+0x144/0x1c4
vfs_write+0x194/0x278
ksys_write+0x64/0xd4
xwrite+0x34/0x84
do_copy+0xf4/0x168
flush_buffer+0x68/0xec
__gunzip+0x370/0x448
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH] mm/page_owner: use vmalloc instead of kmalloc
2018-10-25 19:27 ` Matthew Wilcox
@ 2018-10-26 10:56 ` Michal Hocko
-1 siblings, 0 replies; 15+ messages in thread
From: Michal Hocko @ 2018-10-26 10:56 UTC (permalink / raw)
To: Matthew Wilcox
Cc: miles.chen, Matthias Brugger, linux-kernel, linux-mm,
wsd_upstream, linux-mediatek, linux-arm-kernel
On Thu 25-10-18 12:27:01, Matthew Wilcox wrote:
> On Fri, Oct 26, 2018 at 02:34:41AM +0800, miles.chen@mediatek.com wrote:
> > The kbuf used by page owner is allocated by kmalloc(),
> > which means it can use only normal memory and there might
> > be a "out of memory" issue when we're out of normal memory.
> >
> > Use vmalloc() so we can also allocate kbuf from highmem
> > on 32bit kernel.
>
> ... hang on, there's a bigger problem here.
>
> static const struct file_operations proc_page_owner_operations = {
> .read = read_page_owner,
> };
>
> read_page_owner(struct file *file, char __user *buf, size_t count, loff_t *ppos)
> {
> ...
> return print_page_owner(buf, count, pfn, page,
> page_owner, handle);
> }
>
> static ssize_t
> print_page_owner(char __user *buf, size_t count, unsigned long pfn,
> struct page *page, struct page_owner *page_owner,
> depot_stack_handle_t handle)
> {
> ...
> kbuf = kmalloc(count, GFP_KERNEL);
>
> So I can force the kernel to make an arbitrary size allocation, triggering
> OOMs and forcing swapping if I can get a file handle to this file.
> The only saving grace is that (a) this is a debugfs file and (b) it's
> root-only (mode 0400). Nevertheless, I feel some clamping is called
> for here. Do we really need to output more than 4kB worth of text here?
Completely agreed. Let's just clamp it to a single page. Userspace can
easily loop around the syscall.
--
Michal Hocko
SUSE Labs
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH] mm/page_owner: use vmalloc instead of kmalloc
@ 2018-10-26 10:56 ` Michal Hocko
0 siblings, 0 replies; 15+ messages in thread
From: Michal Hocko @ 2018-10-26 10:56 UTC (permalink / raw)
To: linux-arm-kernel
On Thu 25-10-18 12:27:01, Matthew Wilcox wrote:
> On Fri, Oct 26, 2018 at 02:34:41AM +0800, miles.chen at mediatek.com wrote:
> > The kbuf used by page owner is allocated by kmalloc(),
> > which means it can use only normal memory and there might
> > be a "out of memory" issue when we're out of normal memory.
> >
> > Use vmalloc() so we can also allocate kbuf from highmem
> > on 32bit kernel.
>
> ... hang on, there's a bigger problem here.
>
> static const struct file_operations proc_page_owner_operations = {
> .read = read_page_owner,
> };
>
> read_page_owner(struct file *file, char __user *buf, size_t count, loff_t *ppos)
> {
> ...
> return print_page_owner(buf, count, pfn, page,
> page_owner, handle);
> }
>
> static ssize_t
> print_page_owner(char __user *buf, size_t count, unsigned long pfn,
> struct page *page, struct page_owner *page_owner,
> depot_stack_handle_t handle)
> {
> ...
> kbuf = kmalloc(count, GFP_KERNEL);
>
> So I can force the kernel to make an arbitrary size allocation, triggering
> OOMs and forcing swapping if I can get a file handle to this file.
> The only saving grace is that (a) this is a debugfs file and (b) it's
> root-only (mode 0400). Nevertheless, I feel some clamping is called
> for here. Do we really need to output more than 4kB worth of text here?
Completely agreed. Let's just clamp it to a single page. Userspace can
easily loop around the syscall.
--
Michal Hocko
SUSE Labs
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2018-10-26 10:57 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-10-25 18:34 [PATCH] mm/page_owner: use vmalloc instead of kmalloc miles.chen
2018-10-25 18:34 ` miles.chen at mediatek.com
2018-10-25 18:34 ` miles.chen
2018-10-25 18:44 ` Joe Perches
2018-10-25 18:44 ` Joe Perches
2018-10-26 8:01 ` Miles Chen
2018-10-26 8:01 ` Miles Chen
2018-10-26 8:01 ` Miles Chen
2018-10-25 19:27 ` Matthew Wilcox
2018-10-25 19:27 ` Matthew Wilcox
2018-10-26 8:50 ` Miles Chen
2018-10-26 8:50 ` Miles Chen
2018-10-26 8:50 ` Miles Chen
2018-10-26 10:56 ` Michal Hocko
2018-10-26 10:56 ` Michal Hocko
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.