All of lore.kernel.org
 help / color / mirror / Atom feed
From: Baoquan He <bhe@redhat.com>
To: Michal Hocko <mhocko@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
	linux-mm@kvack.org, LKML <linux-kernel@vger.kernel.org>,
	Stable tree <stable@vger.kernel.org>
Subject: Re: [PATCH] mm, memory_hotplug: teach has_unmovable_pages about of LRU migrateable pages
Date: Mon, 5 Nov 2018 22:23:08 +0800	[thread overview]
Message-ID: <20181105142308.GJ27491@MiWiFi-R3L-srv> (raw)
In-Reply-To: <20181105123837.GH4361@dhcp22.suse.cz>

On 11/05/18 at 01:38pm, Michal Hocko wrote:
> On Mon 05-11-18 18:25:20, Baoquan He wrote:
> > Hi Michal,
> > 
> > On 11/05/18 at 10:28am, Michal Hocko wrote:
> > > 
> > > Or something like this. Ugly as hell, no question about that. I also
> > > have to think about this some more to convince myself this will not
> > > result in an endless loop under some situations.
> > 
> > It failed. Paste the log and patch diff here, please help check if I made
> > any mistake on manual code change. The log is at bottom.
> 
> The retry patch is obviously still racy, it just makes the race window
> slightly smaller and I hoped it would catch most of those races but this
> is obviously not the case.
> 
> I was thinking about your MIGRATE_MOVABLE check some more and I still do
> not like it much, we just change migrate type at many places and I have
> hard time to actually see this is always safe wrt. to what we need here.
> 
> We should be able to restore the zone type check though. The
> primary problem fixed by 15c30bc09085 ("mm, memory_hotplug: make
> has_unmovable_pages more robust") was that early allocations made it to
> the zone_movable range. If we add the check _after_ the PageReserved()
> check then we should be able to rule all bootmem allocation out.
> 
> So what about the following (on top of the previous patch which makes
> sense on its own I believe).

Yes, I think this looks very reasonable and should be robust.

Have tested it, hot removing 4 hotpluggable nodes continusously
succeeds, and then hot adding them back, still works well.

So please feel free to add my Tested-by or Acked-by.

Tested-by: Baoquan He <bhe@redhat.com>
or
Acked-by: Baoquan He <bhe@redhat.com>

Thanks, Michal.
> 
> 
> From d7ffd1342529c892f1de8999c3a5609211599c9d Mon Sep 17 00:00:00 2001
> From: Michal Hocko <mhocko@suse.com>
> Date: Mon, 5 Nov 2018 13:28:51 +0100
> Subject: [PATCH] mm, memory_hotplug: check zone_movable in has_unmovable_pages
> 
> Page state checks are racy. Under a heavy memory workload (e.g. stress
> -m 200 -t 2h) it is quite easy to hit a race window when the page is
> allocated but its state is not fully populated yet. A debugging patch to
> dump the struct page state shows
> : [  476.575516] has_unmovable_pages: pfn:0x10dfec00, found:0x1, count:0x0
> : [  476.582103] page:ffffea0437fb0000 count:1 mapcount:1 mapping:ffff880e05239841 index:0x7f26e5000 compound_mapcount: 1
> : [  476.592645] flags: 0x5fffffc0090034(uptodate|lru|active|head|swapbacked)
> 
> Note that the state has been checked for both PageLRU and PageSwapBacked
> already. Closing this race completely would require some sort of retry
> logic. This can be tricky and error prone (think of potential endless
> or long taking loops).
> 
> Workaround this problem for movable zones at least. Such a zone should
> only contain movable pages. 15c30bc09085 ("mm, memory_hotplug: make
> has_unmovable_pages more robust") has told us that this is not strictly
> true though. Bootmem pages should be marked reserved though so we can
> move the original check after the PageReserved check. Pages from other
> zones are still prone to races but we even do not pretend that memory
> hotremove works for those so pre-mature failure doesn't hurt that much.
> 
> Reported-by: Baoquan He <bhe@redhat.com>
> Signed-off-by: Michal Hocko <mhocko@suse.com>
> ---
>  mm/page_alloc.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> index 48ceda313332..5b64c5bc6ea0 100644
> --- a/mm/page_alloc.c
> +++ b/mm/page_alloc.c
> @@ -7788,6 +7788,14 @@ bool has_unmovable_pages(struct zone *zone, struct page *page, int count,
>  		if (PageReserved(page))
>  			goto unmovable;
>  
> +		/*
> +		 * If the zone is movable and we have ruled out all reserved
> +		 * pages then it should be reasonably safe to assume the rest
> +		 * is movable.
> +		 */
> +		if (zone_idx(zone) == ZONE_MOVABLE)
> +			continue;
> +
>  		/*
>  		 * Hugepages are not in LRU lists, but they're movable.
>  		 * We need not scan over tail pages bacause we don't
> -- 
> 2.19.1
> 
> -- 
> Michal Hocko
> SUSE Labs

  reply	other threads:[~2018-11-05 14:23 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-01  9:10 Memory hotplug failed to offline on bare metal system of multiple nodes Baoquan He
2018-11-01  9:10 ` Baoquan He
2018-11-01  9:22 ` Michal Hocko
2018-11-01  9:42   ` Baoquan He
2018-11-01  9:58     ` Michal Hocko
2018-11-02 15:55 ` [PATCH] mm, memory_hotplug: teach has_unmovable_pages about of LRU migrateable pages Michal Hocko
2018-11-02 15:55   ` Michal Hocko
2018-11-05  0:20   ` Baoquan He
2018-11-05  9:14     ` Michal Hocko
2018-11-05  9:26       ` Baoquan He
2018-11-05  9:35         ` Michal Hocko
2018-11-05  9:28       ` Michal Hocko
2018-11-05  9:45         ` Baoquan He
2018-11-05 10:25         ` Baoquan He
2018-11-05 12:38           ` Michal Hocko
2018-11-05 12:38             ` Michal Hocko
2018-11-05 12:38             ` Michal Hocko
2018-11-05 14:23             ` Baoquan He [this message]
2018-11-05 17:10               ` Michal Hocko
2018-11-06  0:22                 ` Baoquan He
2018-11-06  8:28                   ` Michal Hocko
2018-11-06  9:16                     ` Baoquan He
2018-11-06  9:36                       ` Baoquan He
2018-11-06  9:51                       ` Michal Hocko
2018-11-06 10:00                         ` Baoquan He

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181105142308.GJ27491@MiWiFi-R3L-srv \
    --to=bhe@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.