All of lore.kernel.org
 help / color / mirror / Atom feed
From: Aaron Lindsay <aaron@os.amperecomputing.com>
To: "qemu-arm@nongnu.org" <qemu-arm@nongnu.org>,
	Peter Maydell <peter.maydell@linaro.org>,
	Alistair Francis <alistair.francis@xilinx.com>,
	Wei Huang <wei@redhat.com>,
	Peter Crosthwaite <crosthwaite.peter@gmail.com>,
	Richard Henderson <richard.henderson@linaro.org>
Cc: "qemu-devel@nongnu.org" <qemu-devel@nongnu.org>,
	Michael Spradling <mspradli@codeaurora.org>,
	Digant Desai <digantd@codeaurora.org>,
	Aaron Lindsay <aaron@os.amperecomputing.com>,
	Aaron Lindsay <alindsay@codeaurora.org>
Subject: [Qemu-devel] [PATCH v7 12/12] target/arm: Send interrupts on PMU counter overflow
Date: Mon, 5 Nov 2018 18:52:03 +0000	[thread overview]
Message-ID: <20181105185046.2802-13-aaron@os.amperecomputing.com> (raw)
In-Reply-To: <20181105185046.2802-1-aaron@os.amperecomputing.com>

Setup a QEMUTimer to get a callback when we expect counters to next
overflow and trigger an interrupt at that time.

Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
---
 target/arm/cpu.c    |  11 ++++
 target/arm/cpu.h    |   7 +++
 target/arm/helper.c | 126 +++++++++++++++++++++++++++++++++++++++++---
 3 files changed, 138 insertions(+), 6 deletions(-)

diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index d1c766d180..7cb6a76afb 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -764,6 +764,12 @@ static void arm_cpu_finalizefn(Object *obj)
         QLIST_REMOVE(hook, node);
         g_free(hook);
     }
+#ifndef CONFIG_USER_ONLY
+    if (arm_feature(&cpu->env, ARM_FEATURE_PMU)) {
+        timer_deinit(cpu->pmu_timer);
+        timer_free(cpu->pmu_timer);
+    }
+#endif
 }
 
 static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
@@ -967,6 +973,11 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
             arm_register_pre_el_change_hook(cpu, &pmu_pre_el_change, 0);
             arm_register_el_change_hook(cpu, &pmu_post_el_change, 0);
         }
+
+#ifndef CONFIG_USER_ONLY
+        cpu->pmu_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, arm_pmu_timer_cb,
+                cpu);
+#endif
     } else {
         cpu->pmceid0 = 0x00000000;
         cpu->pmceid1 = 0x00000000;
diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index 067f6efdb6..fa49dc4c47 100644
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -730,6 +730,8 @@ struct ARMCPU {
 
     /* Timers used by the generic (architected) timer */
     QEMUTimer *gt_timer[NUM_GTIMERS];
+    /* Timer used by the PMU */
+    QEMUTimer *pmu_timer;
     /* GPIO outputs for generic timer */
     qemu_irq gt_timer_outputs[NUM_GTIMERS];
     /* GPIO output for GICv3 maintenance interrupt signal */
@@ -988,6 +990,11 @@ void pmccntr_op_finish(CPUARMState *env);
 void pmu_op_start(CPUARMState *env);
 void pmu_op_finish(CPUARMState *env);
 
+/**
+ * Called when a PMU counter is due to overflow
+ */
+void arm_pmu_timer_cb(void *opaque);
+
 /**
  * Functions to register as EL change hooks for PMU mode filtering
  */
diff --git a/target/arm/helper.c b/target/arm/helper.c
index cff3a5a562..6c3f997b0e 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -977,6 +977,7 @@ static const ARMCPRegInfo v6_cp_reginfo[] = {
 /* Definitions for the PMU registers */
 #define PMCRN_MASK  0xf800
 #define PMCRN_SHIFT 11
+#define PMCRLC  0x40
 #define PMCRDP  0x10
 #define PMCRD   0x8
 #define PMCRC   0x4
@@ -996,6 +997,8 @@ static const ARMCPRegInfo v6_cp_reginfo[] = {
                                PMXEVTYPER_M | PMXEVTYPER_MT | \
                                PMXEVTYPER_EVTCOUNT)
 
+#define PMEVCNTR_OVERFLOW_MASK ((uint64_t)1 << 31)
+
 #define PMCCFILTR             0xf8000000
 #define PMCCFILTR_M           PMXEVTYPER_M
 #define PMCCFILTR_EL0         (PMCCFILTR | PMCCFILTR_M)
@@ -1020,6 +1023,11 @@ typedef struct pm_event {
      * counters hold a difference from the return value from this function
      */
     uint64_t (*get_count)(CPUARMState *);
+    /* Return how many nanoseconds it will take (at a minimum) for count events
+     * to occur. A negative value indicates the counter will never overflow, or
+     * that the counter has otherwise arranged for the overflow bit to be set
+     * and the PMU interrupt to be raised on overflow. */
+    int64_t (*ns_per_count)(uint64_t);
 } pm_event;
 
 static bool event_always_supported(CPUARMState *env)
@@ -1036,6 +1044,11 @@ static uint64_t swinc_get_count(CPUARMState *env)
     return 0;
 }
 
+static int64_t swinc_ns_per(uint64_t ignored)
+{
+    return -1;
+}
+
 /*
  * Return the underlying cycle count for the PMU cycle counters. If we're in
  * usermode, simply return 0.
@@ -1051,6 +1064,11 @@ static uint64_t cycles_get_count(CPUARMState *env)
 }
 
 #ifndef CONFIG_USER_ONLY
+static int64_t cycles_ns_per(uint64_t cycles)
+{
+    return (ARM_CPU_FREQ / NANOSECONDS_PER_SECOND) * cycles;
+}
+
 static bool instructions_supported(CPUARMState *env)
 {
     return use_icount == 1 /* Precise instruction counting */;
@@ -1060,21 +1078,29 @@ static uint64_t instructions_get_count(CPUARMState *env)
 {
     return (uint64_t)cpu_get_icount_raw();
 }
+
+static int64_t instructions_ns_per(uint64_t icount)
+{
+    return cpu_icount_to_ns((int64_t)icount);
+}
 #endif
 
 static const pm_event pm_events[] = {
     { .number = 0x000, /* SW_INCR */
       .supported = event_always_supported,
       .get_count = swinc_get_count,
+      .ns_per_count = swinc_ns_per,
     },
 #ifndef CONFIG_USER_ONLY
     { .number = 0x008, /* INST_RETIRED, Instruction architecturally executed */
       .supported = instructions_supported,
       .get_count = instructions_get_count,
+      .ns_per_count = instructions_ns_per,
     },
     { .number = 0x011, /* CPU_CYCLES, Cycle */
       .supported = event_always_supported,
       .get_count = cycles_get_count,
+      .ns_per_count = cycles_ns_per,
     }
 #endif
 };
@@ -1273,6 +1299,13 @@ static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter)
     return enabled && !prohibited && !filtered;
 }
 
+static void pmu_update_irq(CPUARMState *env)
+{
+    ARMCPU *cpu = arm_env_get_cpu(env);
+    qemu_set_irq(cpu->pmu_interrupt, (env->cp15.c9_pmcr & PMCRE) &&
+            (env->cp15.c9_pminten & env->cp15.c9_pmovsr));
+}
+
 /*
  * Ensure c15_ccnt is the guest-visible count so that operations such as
  * enabling/disabling the counter or filtering, modifying the count itself,
@@ -1290,7 +1323,18 @@ void pmccntr_op_start(CPUARMState *env)
             eff_cycles /= 64;
         }
 
-        env->cp15.c15_ccnt = eff_cycles - env->cp15.c15_ccnt_delta;
+        uint64_t new_pmccntr = eff_cycles - env->cp15.c15_ccnt_delta;
+
+        unsigned int overflow_bit = (env->cp15.c9_pmcr & PMCRLC) ? 63 : 31;
+        uint64_t overflow_mask = (uint64_t)1 << overflow_bit;
+        if (!(new_pmccntr & overflow_mask) &&
+                (env->cp15.c15_ccnt & overflow_mask)) {
+            env->cp15.c9_pmovsr |= (1 << 31);
+            new_pmccntr &= ~overflow_mask;
+            pmu_update_irq(env);
+        }
+
+        env->cp15.c15_ccnt = new_pmccntr;
     }
     env->cp15.c15_ccnt_delta = cycles;
 }
@@ -1303,13 +1347,28 @@ void pmccntr_op_start(CPUARMState *env)
 void pmccntr_op_finish(CPUARMState *env)
 {
     if (pmu_counter_enabled(env, 31)) {
-        uint64_t prev_cycles = env->cp15.c15_ccnt_delta;
+#ifndef CONFIG_USER_ONLY
+        uint64_t delta;
+        if (env->cp15.c9_pmcr & PMCRLC) {
+            delta = UINT64_MAX - env->cp15.c15_ccnt + 1;
+        } else {
+            delta = UINT32_MAX - (uint32_t)env->cp15.c15_ccnt + 1;
+        }
+        int64_t overflow_in = cycles_ns_per(delta);
+
+        if (overflow_in > 0) {
+            int64_t overflow_at = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
+                overflow_in;
+            ARMCPU *cpu = arm_env_get_cpu(env);
+            timer_mod_anticipate_ns(cpu->pmu_timer, overflow_at);
+        }
+#endif
 
+        uint64_t prev_cycles = env->cp15.c15_ccnt_delta;
         if (env->cp15.c9_pmcr & PMCRD) {
             /* Increment once every 64 processor clock cycles */
             prev_cycles /= 64;
         }
-
         env->cp15.c15_ccnt_delta = prev_cycles - env->cp15.c15_ccnt;
     }
 }
@@ -1325,8 +1384,15 @@ static void pmevcntr_op_start(CPUARMState *env, uint8_t counter)
     }
 
     if (pmu_counter_enabled(env, counter)) {
-        env->cp15.c14_pmevcntr[counter] =
-            count - env->cp15.c14_pmevcntr_delta[counter];
+        uint64_t new_pmevcntr = count - env->cp15.c14_pmevcntr_delta[counter];
+
+        if (!(new_pmevcntr & PMEVCNTR_OVERFLOW_MASK) &&
+                (env->cp15.c14_pmevcntr[counter] & PMEVCNTR_OVERFLOW_MASK)) {
+            env->cp15.c9_pmovsr |= (1 << counter);
+            new_pmevcntr &= ~PMEVCNTR_OVERFLOW_MASK;
+            pmu_update_irq(env);
+        }
+        env->cp15.c14_pmevcntr[counter] = new_pmevcntr;
     }
     env->cp15.c14_pmevcntr_delta[counter] = count;
 }
@@ -1334,6 +1400,21 @@ static void pmevcntr_op_start(CPUARMState *env, uint8_t counter)
 static void pmevcntr_op_finish(CPUARMState *env, uint8_t counter)
 {
     if (pmu_counter_enabled(env, counter)) {
+#ifndef CONFIG_USER_ONLY
+        uint16_t event = env->cp15.c14_pmevtyper[counter] & PMXEVTYPER_EVTCOUNT;
+        uint16_t event_idx = supported_event_map[event];
+        uint64_t delta = UINT32_MAX -
+            (uint32_t)env->cp15.c14_pmevcntr[counter] + 1;
+        int64_t overflow_in = pm_events[event_idx].ns_per_count(delta);
+
+        if (overflow_in > 0) {
+            int64_t overflow_at = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
+                overflow_in;
+            ARMCPU *cpu = arm_env_get_cpu(env);
+            timer_mod_anticipate_ns(cpu->pmu_timer, overflow_at);
+        }
+#endif
+
         env->cp15.c14_pmevcntr_delta[counter] -=
             env->cp15.c14_pmevcntr[counter];
     }
@@ -1367,6 +1448,19 @@ void pmu_post_el_change(ARMCPU *cpu, void *ignored)
     pmu_op_finish(&cpu->env);
 }
 
+void arm_pmu_timer_cb(void *opaque)
+{
+    ARMCPU *cpu = opaque;
+
+    /* Update all the counter values based on the current underlying counts,
+     * triggering interrupts to be raised, if necessary. pmu_op_finish() also
+     * has the effect of setting the cpu->pmu_timer to the next earliest time a
+     * counter may expire.
+     */
+    pmu_op_start(&cpu->env);
+    pmu_op_finish(&cpu->env);
+}
+
 static void pmcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
                        uint64_t value)
 {
@@ -1403,7 +1497,21 @@ static void pmswinc_write(CPUARMState *env, const ARMCPRegInfo *ri,
                 /* counter is SW_INCR */
                 (env->cp15.c14_pmevtyper[i] & PMXEVTYPER_EVTCOUNT) == 0x0) {
             pmevcntr_op_start(env, i);
-            env->cp15.c14_pmevcntr[i]++;
+
+            /* Detect if this write causes an overflow since we can't predict
+             * PMSWINC overflows like we can for other events
+             */
+            uint64_t new_pmswinc = env->cp15.c14_pmevcntr[i] + 1;
+
+            if (!(new_pmswinc & PMEVCNTR_OVERFLOW_MASK) &&
+                    (env->cp15.c14_pmevcntr[i] & PMEVCNTR_OVERFLOW_MASK)) {
+                env->cp15.c9_pmovsr |= (1 << i);
+                new_pmswinc &= ~PMEVCNTR_OVERFLOW_MASK;
+                pmu_update_irq(env);
+            }
+
+            env->cp15.c14_pmevcntr[i] = new_pmswinc;
+
             pmevcntr_op_finish(env, i);
         }
     }
@@ -1474,6 +1582,7 @@ static void pmcntenset_write(CPUARMState *env, const ARMCPRegInfo *ri,
 {
     value &= pmu_counter_mask(env);
     env->cp15.c9_pmcnten |= value;
+    pmu_update_irq(env);
 }
 
 static void pmcntenclr_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -1481,6 +1590,7 @@ static void pmcntenclr_write(CPUARMState *env, const ARMCPRegInfo *ri,
 {
     value &= pmu_counter_mask(env);
     env->cp15.c9_pmcnten &= ~value;
+    pmu_update_irq(env);
 }
 
 static void pmovsr_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -1488,6 +1598,7 @@ static void pmovsr_write(CPUARMState *env, const ARMCPRegInfo *ri,
 {
     value &= pmu_counter_mask(env);
     env->cp15.c9_pmovsr &= ~value;
+    pmu_update_irq(env);
 }
 
 static void pmovsset_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -1495,6 +1606,7 @@ static void pmovsset_write(CPUARMState *env, const ARMCPRegInfo *ri,
 {
     value &= pmu_counter_mask(env);
     env->cp15.c9_pmovsr |= value;
+    pmu_update_irq(env);
 }
 
 static void pmevtyper_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -1681,6 +1793,7 @@ static void pmintenset_write(CPUARMState *env, const ARMCPRegInfo *ri,
     /* We have no event counters so only the C bit can be changed */
     value &= pmu_counter_mask(env);
     env->cp15.c9_pminten |= value;
+    pmu_update_irq(env);
 }
 
 static void pmintenclr_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -1688,6 +1801,7 @@ static void pmintenclr_write(CPUARMState *env, const ARMCPRegInfo *ri,
 {
     value &= pmu_counter_mask(env);
     env->cp15.c9_pminten &= ~value;
+    pmu_update_irq(env);
 }
 
 static void vbar_write(CPUARMState *env, const ARMCPRegInfo *ri,
-- 
2.19.1

  parent reply	other threads:[~2018-11-05 18:52 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-05 18:51 [Qemu-devel] [PATCH v7 00/12] More fully implement ARM PMUv3 Aaron Lindsay
2018-11-05 18:51 ` [Qemu-devel] [PATCH v7 01/12] migration: Add post_save function to VMStateDescription Aaron Lindsay
2018-11-16 14:42   ` Peter Maydell
2018-11-16 16:34     ` Dr. David Alan Gilbert
2018-11-05 18:51 ` [Qemu-devel] [PATCH v7 02/12] target/arm: Reorganize PMCCNTR accesses Aaron Lindsay
2018-11-16 14:50   ` Peter Maydell
2018-11-16 15:41     ` Aaron Lindsay
2018-11-05 18:51 ` [Qemu-devel] [PATCH v7 03/12] target/arm: Swap PMU values before/after migrations Aaron Lindsay
2018-11-16 14:53   ` Peter Maydell
2018-11-16 16:09     ` Aaron Lindsay
2018-11-16 16:44       ` Peter Maydell
2018-11-16 21:06         ` Aaron Lindsay
2018-11-05 18:51 ` [Qemu-devel] [PATCH v7 04/12] target/arm: Filter cycle counter based on PMCCFILTR_EL0 Aaron Lindsay
2018-11-05 18:51 ` [Qemu-devel] [PATCH v7 05/12] target/arm: Allow AArch32 access for PMCCFILTR Aaron Lindsay
2018-11-05 18:51 ` [Qemu-devel] [PATCH v7 06/12] target/arm: Implement PMOVSSET Aaron Lindsay
2018-11-05 18:51 ` [Qemu-devel] [PATCH v7 07/12] target/arm: Add array for supported PMU events, generate PMCEID[01] Aaron Lindsay
2018-11-16 15:06   ` Peter Maydell
2018-11-16 20:09     ` Aaron Lindsay
2018-11-05 18:51 ` [Qemu-devel] [PATCH v7 08/12] target/arm: Finish implementation of PM[X]EVCNTR and PM[X]EVTYPER Aaron Lindsay
2018-11-05 18:52 ` [Qemu-devel] [PATCH v7 09/12] target/arm: PMU: Add instruction and cycle events Aaron Lindsay
2018-11-05 18:52 ` [Qemu-devel] [PATCH v7 10/12] target/arm: PMU: Set PMCR.N to 4 Aaron Lindsay
2018-11-16 14:59   ` Peter Maydell
2018-11-05 18:52 ` [Qemu-devel] [PATCH v7 11/12] target/arm: Implement PMSWINC Aaron Lindsay
2018-11-05 18:52 ` Aaron Lindsay [this message]
2018-11-16 21:22   ` [Qemu-devel] [PATCH v7 12/12] target/arm: Send interrupts on PMU counter overflow Aaron Lindsay
2018-11-20 14:35     ` Peter Maydell
2018-11-06  8:55 ` [Qemu-devel] [PATCH v7 00/12] More fully implement ARM PMUv3 no-reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181105185046.2802-13-aaron@os.amperecomputing.com \
    --to=aaron@os.amperecomputing.com \
    --cc=alindsay@codeaurora.org \
    --cc=alistair.francis@xilinx.com \
    --cc=crosthwaite.peter@gmail.com \
    --cc=digantd@codeaurora.org \
    --cc=mspradli@codeaurora.org \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    --cc=wei@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.