* Re: [PATCH] platform/x86: thinkpad_acpi: add unsafe_leds parameter
[not found] ` <CAHp75Ve+Z5W=6SNx3eB1MrH=wDPTe9bjQGQ3tEGi9wYCXKD0Pg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2018-10-29 14:07 ` Andy Shevchenko
[not found] ` <CAHp75VfoogP8N0u7fzW7Xo3moSQxseAtFSu7H-yv6MczFFdakg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 3+ messages in thread
From: Andy Shevchenko @ 2018-10-29 14:07 UTC (permalink / raw)
To: milahu-Re5JQEeQqe8AvxtiuMwx3w, Darren Hart, Henrique de Moraes Holschuh
Cc: ibm-acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, Platform Driver
Ah, last but not least, you forgot to include subsystem/driver
maintainers in the Cc list (in my mailbox it's even got directly to a
spam).
On Mon, Oct 29, 2018 at 4:05 PM Andy Shevchenko
<andy.shevchenko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>
> On Sat, Oct 27, 2018 at 9:15 PM Milan Hauth <milahu-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>
> Thank you for the patch. I have few comments here.
>
> >
> > move CONFIG_THINKPAD_ACPI_UNSAFE_LEDS compile config
> > to thinkpad_acpi.unsafe_leds module parameter
> >
> > so there is no more need to re-compile
> > to control important LEDs, which is unsafe
>
> First of all, please use normal English writing, i.e. Capitalize
> sentences, use proper punctuation like commas and periods.
> Second, check your mail clients and software, patch is broken and
> can't be applied.
>
> See my further comments below.
>
> >
> > Signed-off-by: Milan Hauth <milahu-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> >
> > ---
> >
> > usage
> >
> > echo 'options thinkpad_acpi unsafe_leds=Y' \
> > | sudo tee /etc/modprobe.d/thinkpad_acpi-unsafe_leds.conf
> >
> > for ((i=0;i<=15;i=i+1)); do echo "$i off" | sudo tee /proc/acpi/ibm/led; done
> >
> > this will only disable power, battery, standby, dock LEDs
> > but will keep wifi, bluetooth, harddrive, AC power LEDs [and maybe more]
>
>
> This has to be a part of Documentation.
>
> > references
> >
> > [SOLVED] ThinkPad LED's control / Laptop Issues / Arch Linux Forums
> > https://bbs.archlinux.org/viewtopic.php?id=177337#p1384354
> >
> > thinkpad-acpi: restrict access to some firmware LEDs
> > commit a4d5effcc73749ee3ebbf578d162905e6fa4e07d
> > date 2009-04-04
>
> This should be part of commit message in a form of plain text and/or
> specific tags (BugLink, Fixes).
>
> > --- a/drivers/platform/x86/thinkpad_acpi.c
> > +++ b/drivers/platform/x86/thinkpad_acpi.c
> > @@ -88,6 +88,27 @@
> > #include <linux/uaccess.h>
> > #include <acpi/battery.h>
> > #include <acpi/video.h>
> > +#include <linux/moduleparam.h>
> > +
> > +/* parameters for module thinkpad_acpi */
> > +
> > +/*
> > + * parameter unsafe_leds
> > + *
> > + * Allow control of important LEDs? (unsafe)
> > + * N = no [default]
> > + * Y = yes
> > + *
> > + * docs:
> > + * Documentation/laptops/thinkpad-acpi.txt
> > + * section 'LED control'
> > + *
> > + * moved from compile config
> > + * CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
> > + */
> > +static bool unsafe_leds = false;
> > +module_param(unsafe_leds, bool, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP);
> > +MODULE_PARM_DESC(unsafe_leds, "Allow control of important LEDs? (unsafe)");
>
> We are not accepting new module parameters without a very strong argument.
> Here I don't see why it can't be a sysfs node which enables this
> behaviour (or disables) at run time.
>
> (Note: if you introduce a sysfs node you need to add a proper ABI
> subsection to Documentation)
>
> >
> > /* ThinkPad CMOS commands */
> > #define TP_CMOS_VOLUME_DOWN 0
> > @@ -5754,11 +5775,10 @@ static const char * const tpacpi_led_nam
> >
> > static inline bool tpacpi_is_led_restricted(const unsigned int led)
> > {
> > -#ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
> > - return false;
> > -#else
> > - return (1U & (TPACPI_SAFE_LEDS >> led)) == 0;
> > -#endif
>
> > + if (unsafe_leds)
> > + return false;
> > + else
> > + return (1U & (TPACPI_SAFE_LEDS >> led)) == 0;
>
> return unsafe_leds ? false : ...;
>
> But this, perhaps, will be modified when switching to sysfs.
>
> > }
> >
> > static int led_get_status(const unsigned int led)
> > @@ -6048,9 +6068,9 @@ static int __init led_init(struct ibm_in
> > }
> > }
> >
> > -#ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
> > - pr_notice("warning: userspace override of important firmware LEDs is
> > enabled\n");
> > -#endif
> > + if (unsafe_leds)
> > + pr_notice("warning: userspace override of important firmware LEDs
> > is enabled\n");
> > +
> > return 0;
> > }
> >
> >
> > --- a/drivers/platform/x86/Kconfig
> > +++ b/drivers/platform/x86/Kconfig
> > @@ -507,29 +507,6 @@ config THINKPAD_ACPI_DEBUG
> >
> > If you are not sure, say N here.
> >
> > -config THINKPAD_ACPI_UNSAFE_LEDS
>
> People, who are using this option will be surprised by a changed behaviour.
> So, please leave it and use as enforcement of the _initial_ value.
>
> > - bool "Allow control of important LEDs (unsafe)"
> > - depends on THINKPAD_ACPI
> > - ---help---
> > - Overriding LED state on ThinkPads can mask important
> > - firmware alerts (like critical battery condition), or misled
> > - the user into damaging the hardware (undocking or ejecting
> > - the bay while buses are still active), etc.
> > -
> > - LED control on the ThinkPad is write-only (with very few
> > - exceptions on very ancient models), which makes it
> > - impossible to know beforehand if important information will
> > - be lost when one changes LED state.
> > -
> > - Users that know what they are doing can enable this option
> > - and the driver will allow control of every LED, including
> > - the ones on the dock stations.
> > -
> > - Never enable this option on a distribution kernel.
> > -
> > - Say N here, unless you are building a kernel for your own
> > - use, and need to control the important firmware LEDs.
> > -
> > config THINKPAD_ACPI_VIDEO
> > bool "Video output control support"
> > depends on THINKPAD_ACPI
> >
> > --- a/Documentation/laptops/thinkpad-acpi.txt
> > +++ b/Documentation/laptops/thinkpad-acpi.txt
> > @@ -740,8 +740,8 @@ buses are still active), or mask an impo
> > empty battery, or a broken battery), access to most LEDs is
> > restricted.
> >
> > -Unrestricted access to all LEDs requires that thinkpad-acpi be
> > -compiled with the CONFIG_THINKPAD_ACPI_UNSAFE_LEDS option enabled.
> > +Unrestricted access to all LEDs requires setting the parameter
> > +thinkpad_acpi.unsafe_leds to Y.
> > Distributions must never enable this option. Individual users that
> > are aware of the consequences are welcome to enabling it.
>
>
>
> --
> With Best Regards,
> Andy Shevchenko
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] platform/x86: thinkpad_acpi: add unsafe_leds parameter
[not found] ` <CAHp75VfoogP8N0u7fzW7Xo3moSQxseAtFSu7H-yv6MczFFdakg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2018-11-13 16:41 ` Milan Hauth
[not found] ` <20181113174136.58198c3a-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
0 siblings, 1 reply; 3+ messages in thread
From: Milan Hauth @ 2018-11-13 16:41 UTC (permalink / raw)
To: Andy Shevchenko, Darren Hart, Henrique de Moraes Holschuh
Cc: ibm-acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, Platform Driver
thanks for your replies.
done:
* use normal english, at least in docs
* check mail client
* move usage to docs
* use sysfs node, not module parameter
* add sysfs ABI docs
* use ternary if notation
* keep compile option + use as default value
todo:
* do i need all that sysfs code?
* did i use the 'fixes' keyword correctly?
* in ABI docs: KernelVersion? Contact?
Henrique de Moraes Holschuh <hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org> wrote:
> Also, if you mess with those LEDs, IMO you'd better have something
> that *does* warn the user when the kernel spills alert and
> emergency-level messages to the kernel log, which is _not_ the
> default of some large- userbase desktop environments out there. You
> have been warned.
should we name concrete solutions in the docs?
should we add 'how to disable wifi LED'?
like ...
echo none | sudo tee /sys/class/leds/phy0-led/trigger
commit message:
To thinkpad_acpi module, add led_expose_unsafe_leds sysfs node
Allow the user to control 'unsafe LEDs' by running
echo Y | sudo tee \
/sys/devices/platform/thinkpad_acpi/led_expose_unsafe_leds
... instead of forcing to re-compile the thinkpad_acpi module
with CONFIG_THINKPAD_ACPI_UNSAFE_LEDS=Y
Fixes: https://bbs.archlinux.org/viewtopic.php?id=177337
Fixes: commit a4d5effcc73749ee3ebbf578d162905e6fa4e07d
Signed-off-by: Milan Hauth <milahu-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
patch v2
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -5752,13 +5752,56 @@
};
#define TPACPI_SAFE_LEDS 0x1081U
+/*
+ * led_expose_unsafe_leds
+ *
+ * Allow control of important LEDs? (unsafe)
+ * init value is taken from compile config
+ * variable can be set via sysfs file
+ * /sys/devices/platform/thinkpad_acpi/led_expose_unsafe_leds
+ */
+#ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
+static bool led_expose_unsafe_leds = true;
+#else
+static bool led_expose_unsafe_leds = false;
+#endif
+
+/* sysfs led expose_unsafe_leds ---------------------------------------- */
+static ssize_t led_expose_unsafe_leds_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", (int) led_expose_unsafe_leds);
+}
+
+static ssize_t led_expose_unsafe_leds_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int res;
+ res = kstrtobool(buf, &led_expose_unsafe_leds);
+ return res ? res : count;
+}
+
+static DEVICE_ATTR_RW(led_expose_unsafe_leds);
+
+/* --------------------------------------------------------------------- */
+
+static struct attribute *led_attributes[] = {
+ &dev_attr_led_expose_unsafe_leds.attr,
+ NULL
+};
+
+static const struct attribute_group led_attr_group = {
+ .attrs = led_attributes,
+};
+
+/* done sysfs led expose_unsafe_leds ----------------------------------- */
+
static inline bool tpacpi_is_led_restricted(const unsigned int led)
{
-#ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
- return false;
-#else
- return (1U & (TPACPI_SAFE_LEDS >> led)) == 0;
-#endif
+ return led_expose_unsafe_leds ? false : \
+ (1U & (TPACPI_SAFE_LEDS >> led)) == 0;
}
static int led_get_status(const unsigned int led)
@@ -5900,6 +5943,10 @@
}
kfree(tpacpi_leds);
+
+ sysfs_remove_group(&tpacpi_pdev->dev.kobj,
+ &led_attr_group);
+
}
static int __init tpacpi_init_led(unsigned int led)
@@ -6048,15 +6095,20 @@
}
}
-#ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
- pr_notice("warning: userspace override of important firmware LEDs is enabled\n");
-#endif
- return 0;
+ if(led_expose_unsafe_leds)
+ pr_notice("warning: userspace override of important firmware LEDs is enabled\n");
+
+ rc = sysfs_create_group(&tpacpi_pdev->dev.kobj,
+ &led_attr_group);
+
+ return rc ? rc : 0;
}
#define str_led_status(s) \
((s) == TPACPI_LED_OFF ? "off" : \
((s) == TPACPI_LED_ON ? "on" : "blinking"))
+
+/* proc acpi/ibm/led */
static int led_read(struct seq_file *m)
{
--- a/Documentation/ABI/testing/sysfs-driver-thinkpad_acpi
+++ b/Documentation/ABI/testing/sysfs-driver-thinkpad_acpi
@@ -0,0 +1,37 @@
+What: /sys/devices/platform/thinkpad_acpi/led_expose_unsafe_leds
+Date: October 31, 2018
+KernelVersion: 4.18.16
+Contact: platform-driver-x86-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
+Description: Allow control of important LEDs? (unsafe)
+ Setting this to 'Yes' will temporarily enable
+ unrestricted access to all LEDs, including important LEDs.
+ values are:
+ 0 = N = No = protect unsafe LEDs [default]
+ 1 = Y = Yes = expose unsafe LEDs
+ Why is this unsafe?
+ Some LEDs can warn the user, before the hardware fails,
+ or before the user actively damages the hardware.
+ For example, before the battery runs empty, the battery LED
+ will start blinking orange. Or, as long as devices
+ are connected to a docking station or a port replicator,
+ the dock / replicator LEDs will be active.
+ Why is this not perfect?
+ Because even if you turn off all LEDs, for example with
+ echo Y | sudo tee \
+ /sys/devices/platform/thinkpad_acpi/led_expose_unsafe_leds
+ for ((i=0;i<16;i=i+1)); do
+ echo "$i off" | sudo tee /proc/acpi/ibm/led
+ done
+ .... some LEDs will stay active: hard drive LED, wifi LED,
+ bluetooth LED, docking station LED, AC power LED, and maybe more.
+ Change default value?
+ The default value is taken from the compile option
+ CONFIG_THINKPAD_ACPI_UNSAFE_LEDS.
+ To allow control of important LEDs by default,
+ re-compile the thinkpad-acpi module
+ with the option CONFIG_THINKPAD_ACPI_UNSAFE_LEDS set to Y.
+ Distributions must never enable this option.
+ Individual users that are aware of the consequences
+ are welcome to enabling it.
+ read: Documentation/laptops/thinkpad-acpi.txt
+ section: LED control
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -740,8 +740,15 @@
empty battery, or a broken battery), access to most LEDs is
restricted.
-Unrestricted access to all LEDs requires that thinkpad-acpi be
-compiled with the CONFIG_THINKPAD_ACPI_UNSAFE_LEDS option enabled.
+Unrestricted access to all LEDs can be enabled either temporarily
+by setting the sysfs attribute led_expose_unsafe_leds to Y
+for example with:
+echo Y | \
+sudo tee /sys/devices/platform/thinkpad_acpi/led_expose_unsafe_leds;
+or permanently by re-compiling the thinkpad-acpi module with the
+compile option CONFIG_THINKPAD_ACPI_UNSAFE_LEDS set to Y.
+This will set the default value of led_expose_unsafe_leds to Y.
+read: Documentation/ABI/testing/sysfs-driver-thinkpad_acpi
Distributions must never enable this option. Individual users that
are aware of the consequences are welcome to enabling it.
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -530,6 +530,11 @@
Say N here, unless you are building a kernel for your own
use, and need to control the important firmware LEDs.
+ If you choose N, you can still enable this option at runtime
+ by writing 'Y' to the sysfs file
+ /sys/devices/platform/thinkpad_acpi/led_expose_unsafe_leds
+ read: Documentation/ABI/testing/sysfs-driver-thinkpad_acpi
+
config THINKPAD_ACPI_VIDEO
bool "Video output control support"
depends on THINKPAD_ACPI
On Tue, 30 Oct 2018 10:50:25 -0300
Henrique de Moraes Holschuh <hmh-N3TV7GIv+o9fyO9Q7EP/yw@public.gmane.org> wrote:
> On Sat, 27 Oct 2018, Milan Hauth wrote:
> > move CONFIG_THINKPAD_ACPI_UNSAFE_LEDS compile config
> > to thinkpad_acpi.unsafe_leds module parameter
> >
> > so there is no more need to re-compile
> > to control important LEDs, which is unsafe
> >
> > Signed-off-by: Milan Hauth <milahu-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>
> I am not confortable signing-off on this one.
>
> That option is a compile-time config option with a warning for distros
> to never enable it for a reason:
>
> If you are going to enable it, you are to know what you are doing,
> *and* the user is to be made aware of the fact that you did it.
>
> Also, if you mess with those LEDs, IMO you'd better have something
> that *does* warn the user when the kernel spills alert and
> emergency-level messages to the kernel log, which is _not_ the
> default of some large- userbase desktop environments out there. You
> have been warned.
>
On Mon, 29 Oct 2018 16:07:12 +0200
Andy Shevchenko <andy.shevchenko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> Ah, last but not least, you forgot to include subsystem/driver
> maintainers in the Cc list (in my mailbox it's even got directly to a
> spam).
On Mon, 29 Oct 2018 16:05:32 +0200
Andy Shevchenko <andy.shevchenko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> On Sat, Oct 27, 2018 at 9:15 PM Milan Hauth <milahu-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>
> Thank you for the patch. I have few comments here.
>
> >
> > move CONFIG_THINKPAD_ACPI_UNSAFE_LEDS compile config
> > to thinkpad_acpi.unsafe_leds module parameter
> >
> > so there is no more need to re-compile
> > to control important LEDs, which is unsafe
>
> First of all, please use normal English writing, i.e. Capitalize
> sentences, use proper punctuation like commas and periods.
> Second, check your mail clients and software, patch is broken and
> can't be applied.
>
> See my further comments below.
>
> >
> > Signed-off-by: Milan Hauth <milahu-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> >
> > ---
> >
> > usage
> >
> > echo 'options thinkpad_acpi unsafe_leds=Y' \
> > | sudo tee /etc/modprobe.d/thinkpad_acpi-unsafe_leds.conf
> >
> > for ((i=0;i<=15;i=i+1)); do echo "$i off" | sudo tee /proc/acpi/ibm/led; done
> >
> > this will only disable power, battery, standby, dock LEDs
> > but will keep wifi, bluetooth, harddrive, AC power LEDs [and maybe more]
>
>
> This has to be a part of Documentation.
>
> > references
> >
> > [SOLVED] ThinkPad LED's control / Laptop Issues / Arch Linux Forums
> > https://bbs.archlinux.org/viewtopic.php?id=177337#p1384354
> >
> > thinkpad-acpi: restrict access to some firmware LEDs
> > commit a4d5effcc73749ee3ebbf578d162905e6fa4e07d
> > date 2009-04-04
>
> This should be part of commit message in a form of plain text and/or
> specific tags (BugLink, Fixes).
>
> > --- a/drivers/platform/x86/thinkpad_acpi.c
> > +++ b/drivers/platform/x86/thinkpad_acpi.c
> > @@ -88,6 +88,27 @@
> > #include <linux/uaccess.h>
> > #include <acpi/battery.h>
> > #include <acpi/video.h>
> > +#include <linux/moduleparam.h>
> > +
> > +/* parameters for module thinkpad_acpi */
> > +
> > +/*
> > + * parameter unsafe_leds
> > + *
> > + * Allow control of important LEDs? (unsafe)
> > + * N = no [default]
> > + * Y = yes
> > + *
> > + * docs:
> > + * Documentation/laptops/thinkpad-acpi.txt
> > + * section 'LED control'
> > + *
> > + * moved from compile config
> > + * CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
> > + */
> > +static bool unsafe_leds = false;
> > +module_param(unsafe_leds, bool, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP);
> > +MODULE_PARM_DESC(unsafe_leds, "Allow control of important LEDs? (unsafe)");
>
> We are not accepting new module parameters without a very strong argument.
> Here I don't see why it can't be a sysfs node which enables this
> behaviour (or disables) at run time.
>
> (Note: if you introduce a sysfs node you need to add a proper ABI
> subsection to Documentation)
>
> >
> > /* ThinkPad CMOS commands */
> > #define TP_CMOS_VOLUME_DOWN 0
> > @@ -5754,11 +5775,10 @@ static const char * const tpacpi_led_nam
> >
> > static inline bool tpacpi_is_led_restricted(const unsigned int led)
> > {
> > -#ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
> > - return false;
> > -#else
> > - return (1U & (TPACPI_SAFE_LEDS >> led)) == 0;
> > -#endif
>
> > + if (unsafe_leds)
> > + return false;
> > + else
> > + return (1U & (TPACPI_SAFE_LEDS >> led)) == 0;
>
> return unsafe_leds ? false : ...;
>
> But this, perhaps, will be modified when switching to sysfs.
>
> > }
> >
> > static int led_get_status(const unsigned int led)
> > @@ -6048,9 +6068,9 @@ static int __init led_init(struct ibm_in
> > }
> > }
> >
> > -#ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS
> > - pr_notice("warning: userspace override of important firmware LEDs is
> > enabled\n");
> > -#endif
> > + if (unsafe_leds)
> > + pr_notice("warning: userspace override of important firmware LEDs
> > is enabled\n");
> > +
> > return 0;
> > }
> >
> >
> > --- a/drivers/platform/x86/Kconfig
> > +++ b/drivers/platform/x86/Kconfig
> > @@ -507,29 +507,6 @@ config THINKPAD_ACPI_DEBUG
> >
> > If you are not sure, say N here.
> >
> > -config THINKPAD_ACPI_UNSAFE_LEDS
>
> People, who are using this option will be surprised by a changed behaviour.
> So, please leave it and use as enforcement of the _initial_ value.
>
> > - bool "Allow control of important LEDs (unsafe)"
> > - depends on THINKPAD_ACPI
> > - ---help---
> > - Overriding LED state on ThinkPads can mask important
> > - firmware alerts (like critical battery condition), or misled
> > - the user into damaging the hardware (undocking or ejecting
> > - the bay while buses are still active), etc.
> > -
> > - LED control on the ThinkPad is write-only (with very few
> > - exceptions on very ancient models), which makes it
> > - impossible to know beforehand if important information will
> > - be lost when one changes LED state.
> > -
> > - Users that know what they are doing can enable this option
> > - and the driver will allow control of every LED, including
> > - the ones on the dock stations.
> > -
> > - Never enable this option on a distribution kernel.
> > -
> > - Say N here, unless you are building a kernel for your own
> > - use, and need to control the important firmware LEDs.
> > -
> > config THINKPAD_ACPI_VIDEO
> > bool "Video output control support"
> > depends on THINKPAD_ACPI
> >
> > --- a/Documentation/laptops/thinkpad-acpi.txt
> > +++ b/Documentation/laptops/thinkpad-acpi.txt
> > @@ -740,8 +740,8 @@ buses are still active), or mask an impo
> > empty battery, or a broken battery), access to most LEDs is
> > restricted.
> >
> > -Unrestricted access to all LEDs requires that thinkpad-acpi be
> > -compiled with the CONFIG_THINKPAD_ACPI_UNSAFE_LEDS option enabled.
> > +Unrestricted access to all LEDs requires setting the parameter
> > +thinkpad_acpi.unsafe_leds to Y.
> > Distributions must never enable this option. Individual users that
> > are aware of the consequences are welcome to enabling it.
>
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] platform/x86: thinkpad_acpi: add unsafe_leds parameter
[not found] ` <20181113174136.58198c3a-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
@ 2018-12-03 17:28 ` Andy Shevchenko
0 siblings, 0 replies; 3+ messages in thread
From: Andy Shevchenko @ 2018-12-03 17:28 UTC (permalink / raw)
To: Milan Hauth
Cc: Darren Hart, Henrique de Moraes Holschuh,
ibm-acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f, Platform Driver
On Tue, Nov 13, 2018 at 6:41 PM Milan Hauth <milahu-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> thanks for your replies.
Thanks for an update, though made in wrong format:
- no top post
- should be send as a separate patch in a separate thread
- should have increased version
But the main one is...
> > On Sat, 27 Oct 2018, Milan Hauth wrote:
> > > move CONFIG_THINKPAD_ACPI_UNSAFE_LEDS compile config
> > > to thinkpad_acpi.unsafe_leds module parameter
> > >
> > > so there is no more need to re-compile
> > > to control important LEDs, which is unsafe
> > >
> > > Signed-off-by: Milan Hauth <milahu-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> >
> > I am not confortable signing-off on this one.
...I'm not familiar with this interface and I rely on Henrique's
opinion, so, I can't take it.
Sorry.
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-12-03 17:28 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <CAGiEHCtu9-chj_wN1wau4aBzvcCR8Bmq1-2OZiHq0yqz3=BUSA@mail.gmail.com>
[not found] ` <CAHp75Ve+Z5W=6SNx3eB1MrH=wDPTe9bjQGQ3tEGi9wYCXKD0Pg@mail.gmail.com>
[not found] ` <CAHp75Ve+Z5W=6SNx3eB1MrH=wDPTe9bjQGQ3tEGi9wYCXKD0Pg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-10-29 14:07 ` [PATCH] platform/x86: thinkpad_acpi: add unsafe_leds parameter Andy Shevchenko
[not found] ` <CAHp75VfoogP8N0u7fzW7Xo3moSQxseAtFSu7H-yv6MczFFdakg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-11-13 16:41 ` Milan Hauth
[not found] ` <20181113174136.58198c3a-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2018-12-03 17:28 ` Andy Shevchenko
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.