[PATCH v2 0/2] Add support for Microchip MCP41xxx/42xxx potentiometers

[PATCH v2 0/2] Add support for Microchip MCP41xxx/42xxx potentiometers

[Chris Coffey]

Hello all,

This patch series adds device-tree documentation and driver support
for the Microchip MCP41xxx/42xxx family of digital potentiometers.

Changes in v2:
 - Move device tree binding documentation to separate commit as
   pointed out by Himanshu Jha.
 - Remove explicit '= 0' initialization in mcp41010_type enum as
   recommended by Himanshu Jha.
 - Change MCP41010_WRITE from (0x01 << 4) to BIT(4) as recommended by
   Himanshu Jha.
 - Use of_device_get_match_data() to load configuration as 
   recommended by Peter Rosin. 
 - Rename MCP41010_WIPER_ENABLE to MCP41010_WIPER_CHANNEL as 
   suggested by Peter Rosin.
 - Remove CONFIG_OF build protections as recommended by Jonathan
   Cameron.
 - Remove of_match_ptr wrapper from mcp41010_driver struct as 
   recommended by Jonathan Cameron.
 - Remove blank line in mcp41010.c intro as recommended by Jonathan
   Cameron.

Chris Coffey (2):
  dt-bindings: iio: potentiometer: Add Microchip MCP41xxx/42xxx
  iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx

 .../bindings/iio/potentiometer/mcp41010.txt        |  29 +++
 drivers/iio/potentiometer/Kconfig                  |  12 ++
 drivers/iio/potentiometer/Makefile                 |   1 +
 drivers/iio/potentiometer/mcp41010.c               | 216 +++++++++++++++++++++
 4 files changed, 258 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
 create mode 100644 drivers/iio/potentiometer/mcp41010.c

-- 
2.11.0

[PATCH v2 1/2] dt-bindings: iio: potentiometer: Add Microchip MCP41xxx/42xxx

[Chris Coffey]

This patch adds device tree documentation for the Microchip
MCP41xxx/42xxx family of digital potentiometers.

Signed-off-by: Chris Coffey <cmc@babblebit.net>
---
 .../bindings/iio/potentiometer/mcp41010.txt        | 29 ++++++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt

diff --git a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
new file mode 100644
index 0000000000..17565acace
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
@@ -0,0 +1,29 @@
+* Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer
+  driver
+
+Datasheet publicly available at:
+http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
+
+The node for this driver must be a child node of a SPI controller, hence
+all mandatory properties described in
+
+        Documentation/devicetree/bindings/spi/spi-bus.txt
+
+must be specified.
+
+Required properties:
+	- compatible:  	Must be one of the following, depending on the
+			model:
+			"microchip,mcp41010"
+			"microchip,mcp41050"
+			"microchip,mcp41100"
+			"microchip,mcp42010"
+			"microchip,mcp42050"
+			"microchip,mcp42100"
+
+Example:
+mcp41010: potentiometer@0 {
+	compatible = "mcp41010";
+	reg = <0>;
+	spi-max-frequency = <500000>;
+};
-- 
2.11.0

[PATCH v2 2/2] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx

[Chris Coffey]

This patch adds driver support for the Microchip MCP41xxx/42xxx family
of digital potentiometers:

DEVICE      Wipers  Positions   Resistance (kOhm)
MCP41010    1       256         10
MCP41050    1       256         50
MCP41100    1       256         100
MCP42010    2       256         10
MCP42050    2       256         50
MCP42100    2       256         100

Datasheet: http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf

Signed-off-by: Chris Coffey <cmc@babblebit.net>
---
 drivers/iio/potentiometer/Kconfig    |  12 ++
 drivers/iio/potentiometer/Makefile   |   1 +
 drivers/iio/potentiometer/mcp41010.c | 216 +++++++++++++++++++++++++++++++++++
 3 files changed, 229 insertions(+)
 create mode 100644 drivers/iio/potentiometer/mcp41010.c

diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig
index 79ec2eba49..6303cbe799 100644
--- a/drivers/iio/potentiometer/Kconfig
+++ b/drivers/iio/potentiometer/Kconfig
@@ -90,6 +90,18 @@ config MCP4531
 	  To compile this driver as a module, choose M here: the
 	  module will be called mcp4531.
 
+config MCP41010
+	tristate "Microchip MCP41xxx/MCP42xxx Digital Potentiometer driver"
+	depends on SPI
+	help
+	  Say yes here to build support for the Microchip
+	  MCP41010, MCP41050, MCP41100,
+	  MCP42010, MCP42050, MCP42100
+	  digital potentiometer chips.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mcp41010.
+
 config TPL0102
 	tristate "Texas Instruments digital potentiometer driver"
 	depends on I2C
diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile
index 4af657883c..8ff55138cf 100644
--- a/drivers/iio/potentiometer/Makefile
+++ b/drivers/iio/potentiometer/Makefile
@@ -11,4 +11,5 @@ obj-$(CONFIG_MAX5487) += max5487.o
 obj-$(CONFIG_MCP4018) += mcp4018.o
 obj-$(CONFIG_MCP4131) += mcp4131.o
 obj-$(CONFIG_MCP4531) += mcp4531.o
+obj-$(CONFIG_MCP41010) += mcp41010.o
 obj-$(CONFIG_TPL0102) += tpl0102.o
diff --git a/drivers/iio/potentiometer/mcp41010.c b/drivers/iio/potentiometer/mcp41010.c
new file mode 100644
index 0000000000..19fa50c9ee
--- /dev/null
+++ b/drivers/iio/potentiometer/mcp41010.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Industrial I/O driver for Microchip digital potentiometers
+ *
+ * Copyright (c) 2018 Chris Coffey <cmc@babblebit.net>
+ * Based on: Slawomir Stepien's code from mcp4131.c
+ *
+ * Datasheet: http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
+ *
+ * DEVID	#Wipers	#Positions	Resistance (kOhm)
+ * mcp41010	1	256		10
+ * mcp41050	1	256		50
+ * mcp41100	1	256		100
+ * mcp42010	2	256		10
+ * mcp42050	2	256		50
+ * mcp42100	2	256		100
+ */
+
+#include <linux/cache.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/types.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/spi/spi.h>
+
+#define MCP41010_MAX_WIPERS	2
+#define MCP41010_WRITE		BIT(4)
+#define MCP41010_WIPER_MAX	255
+#define MCP41010_WIPER_CHANNEL	BIT(0)
+
+struct mcp41010_cfg {
+	int wipers;
+	int kohms;
+};
+
+enum mcp41010_type {
+	MCP41010,
+	MCP41050,
+	MCP41100,
+	MCP42010,
+	MCP42050,
+	MCP42100,
+};
+
+static const struct mcp41010_cfg mcp41010_cfg[] = {
+	[MCP41010] = { .wipers = 1, .kohms =  10, },
+	[MCP41050] = { .wipers = 1, .kohms =  50, },
+	[MCP41100] = { .wipers = 1, .kohms = 100, },
+	[MCP42010] = { .wipers = 2, .kohms =  10, },
+	[MCP42050] = { .wipers = 2, .kohms =  50, },
+	[MCP42100] = { .wipers = 2, .kohms = 100, },
+};
+
+struct mcp41010_data {
+	struct spi_device *spi;
+	const struct mcp41010_cfg *cfg;
+	struct mutex lock; /* Protect write sequences */
+	unsigned int value[MCP41010_MAX_WIPERS]; /* Cache wiper values */
+	u8 buf[2] ____cacheline_aligned;
+};
+
+#define MCP41010_CHANNEL(ch) {					\
+	.type = IIO_RESISTANCE,					\
+	.indexed = 1,						\
+	.output = 1,						\
+	.channel = (ch),					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+}
+
+static const struct iio_chan_spec mcp41010_channels[] = {
+	MCP41010_CHANNEL(0),
+	MCP41010_CHANNEL(1),
+};
+
+static int mcp41010_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct mcp41010_data *data = iio_priv(indio_dev);
+	int channel = chan->channel;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		*val = data->value[channel];
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		*val = 1000 * data->cfg->kohms;
+		*val2 = MCP41010_WIPER_MAX;
+		return IIO_VAL_FRACTIONAL;
+	}
+
+	return -EINVAL;
+}
+
+static int mcp41010_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	int err;
+	struct mcp41010_data *data = iio_priv(indio_dev);
+	int channel = chan->channel;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (val > MCP41010_WIPER_MAX || val < 0)
+			return -EINVAL;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	mutex_lock(&data->lock);
+
+	data->buf[0] = MCP41010_WIPER_CHANNEL << channel;
+	data->buf[0] |= MCP41010_WRITE;
+	data->buf[1] = val & 0xff;
+
+	err = spi_write(data->spi, data->buf, 2);
+	if (!err)
+		data->value[channel] = val;
+
+	mutex_unlock(&data->lock);
+
+	return err;
+}
+
+static const struct iio_info mcp41010_info = {
+	.read_raw = mcp41010_read_raw,
+	.write_raw = mcp41010_write_raw,
+};
+
+static int mcp41010_probe(struct spi_device *spi)
+{
+	int err;
+	struct device *dev = &spi->dev;
+	unsigned long devid = spi_get_device_id(spi)->driver_data;
+	struct mcp41010_data *data;
+	struct iio_dev *indio_dev;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	spi_set_drvdata(spi, indio_dev);
+	data->spi = spi;
+	data->cfg = of_device_get_match_data(&spi->dev);
+	if (!data->cfg)
+		data->cfg = &mcp41010_cfg[devid];
+
+	mutex_init(&data->lock);
+
+	indio_dev->dev.parent = dev;
+	indio_dev->info = &mcp41010_info;
+	indio_dev->channels = mcp41010_channels;
+	indio_dev->num_channels = data->cfg->wipers;
+	indio_dev->name = spi_get_device_id(spi)->name;
+
+	err = devm_iio_device_register(dev, indio_dev);
+	if (err) {
+		dev_info(&spi->dev, "Unable to register %s\n", indio_dev->name);
+		return err;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id mcp41010_match[] = {
+	{ .compatible = "microchip,mcp41010",
+		.data = &mcp41010_cfg[MCP41010] },
+	{ .compatible = "microchip,mcp41050",
+		.data = &mcp41010_cfg[MCP41050] },
+	{ .compatible = "microchip,mcp41100",
+		.data = &mcp41010_cfg[MCP41100] },
+	{ .compatible = "microchip,mcp42010",
+		.data = &mcp41010_cfg[MCP42010] },
+	{ .compatible = "microchip,mcp42050",
+		.data = &mcp41010_cfg[MCP42050] },
+	{ .compatible = "microchip,mcp42100",
+		.data = &mcp41010_cfg[MCP42100] },
+	{}
+};
+MODULE_DEVICE_TABLE(of, mcp41010_match);
+
+static const struct spi_device_id mcp41010_id[] = {
+	{ "mcp41010", MCP41010 },
+	{ "mcp41050", MCP41050 },
+	{ "mcp41100", MCP41100 },
+	{ "mcp42010", MCP42010 },
+	{ "mcp42050", MCP42050 },
+	{ "mcp42100", MCP42100 },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, mcp41010_id);
+
+static struct spi_driver mcp41010_driver = {
+	.driver = {
+		.name	= "mcp41010",
+		.of_match_table = mcp41010_match,
+	},
+	.probe		= mcp41010_probe,
+	.id_table	= mcp41010_id,
+};
+
+module_spi_driver(mcp41010_driver);
+
+MODULE_AUTHOR("Chris Coffey <cmc@babblebit.net>");
+MODULE_DESCRIPTION("MCP41010 digital potentiometer");
+MODULE_LICENSE("GPL v2");
-- 
2.11.0

Re: [PATCH v2 1/2] dt-bindings: iio: potentiometer: Add Microchip MCP41xxx/42xxx

[Slawomir Stepien]

On lis 14, 2018 09:52, Chris Coffey wrote:
> This patch adds device tree documentation for the Microchip
> MCP41xxx/42xxx family of digital potentiometers.

Hi

One note inline.

> Signed-off-by: Chris Coffey <cmc@babblebit.net>
> ---
>  .../bindings/iio/potentiometer/mcp41010.txt        | 29 ++++++++++++++++++++++
>  1 file changed, 29 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> new file mode 100644
> index 0000000000..17565acace
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> @@ -0,0 +1,29 @@
> +* Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer
> +  driver
> +
> +Datasheet publicly available at:
> +http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
> +
> +The node for this driver must be a child node of a SPI controller, hence
> +all mandatory properties described in
> +
> +        Documentation/devicetree/bindings/spi/spi-bus.txt
> +
> +must be specified.
> +
> +Required properties:
> +	- compatible:  	Must be one of the following, depending on the
> +			model:
> +			"microchip,mcp41010"
> +			"microchip,mcp41050"
> +			"microchip,mcp41100"
> +			"microchip,mcp42010"
> +			"microchip,mcp42050"
> +			"microchip,mcp42100"
> +
> +Example:
> +mcp41010: potentiometer@0 {
> +	compatible = "mcp41010";

Missing company name in compatible.

> +	reg = <0>;
> +	spi-max-frequency = <500000>;
> +};

-- 
Slawomir Stepien

Re: [PATCH v2 2/2] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx

[Slawomir Stepien]

On lis 14, 2018 09:52, Chris Coffey wrote:
> This patch adds driver support for the Microchip MCP41xxx/42xxx family
> of digital potentiometers:
> 
> DEVICE      Wipers  Positions   Resistance (kOhm)
> MCP41010    1       256         10
> MCP41050    1       256         50
> MCP41100    1       256         100
> MCP42010    2       256         10
> MCP42050    2       256         50
> MCP42100    2       256         100
> 
> Datasheet: http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf

Hi

Some hints inline.

> Signed-off-by: Chris Coffey <cmc@babblebit.net>
> ---
>  drivers/iio/potentiometer/Kconfig    |  12 ++
>  drivers/iio/potentiometer/Makefile   |   1 +
>  drivers/iio/potentiometer/mcp41010.c | 216 +++++++++++++++++++++++++++++++++++
>  3 files changed, 229 insertions(+)
>  create mode 100644 drivers/iio/potentiometer/mcp41010.c
> 
> diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig
> index 79ec2eba49..6303cbe799 100644
> --- a/drivers/iio/potentiometer/Kconfig
> +++ b/drivers/iio/potentiometer/Kconfig
> @@ -90,6 +90,18 @@ config MCP4531
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called mcp4531.
>  
> +config MCP41010
> +	tristate "Microchip MCP41xxx/MCP42xxx Digital Potentiometer driver"
> +	depends on SPI
> +	help
> +	  Say yes here to build support for the Microchip
> +	  MCP41010, MCP41050, MCP41100,
> +	  MCP42010, MCP42050, MCP42100
> +	  digital potentiometer chips.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called mcp41010.
> +
>  config TPL0102
>  	tristate "Texas Instruments digital potentiometer driver"
>  	depends on I2C
> diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile
> index 4af657883c..8ff55138cf 100644
> --- a/drivers/iio/potentiometer/Makefile
> +++ b/drivers/iio/potentiometer/Makefile
> @@ -11,4 +11,5 @@ obj-$(CONFIG_MAX5487) += max5487.o
>  obj-$(CONFIG_MCP4018) += mcp4018.o
>  obj-$(CONFIG_MCP4131) += mcp4131.o
>  obj-$(CONFIG_MCP4531) += mcp4531.o
> +obj-$(CONFIG_MCP41010) += mcp41010.o
>  obj-$(CONFIG_TPL0102) += tpl0102.o
> diff --git a/drivers/iio/potentiometer/mcp41010.c b/drivers/iio/potentiometer/mcp41010.c
> new file mode 100644
> index 0000000000..19fa50c9ee
> --- /dev/null
> +++ b/drivers/iio/potentiometer/mcp41010.c
> @@ -0,0 +1,216 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Industrial I/O driver for Microchip digital potentiometers
> + *
> + * Copyright (c) 2018 Chris Coffey <cmc@babblebit.net>
> + * Based on: Slawomir Stepien's code from mcp4131.c
> + *
> + * Datasheet: http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
> + *
> + * DEVID	#Wipers	#Positions	Resistance (kOhm)
> + * mcp41010	1	256		10
> + * mcp41050	1	256		50
> + * mcp41100	1	256		100
> + * mcp42010	2	256		10
> + * mcp42050	2	256		50
> + * mcp42100	2	256		100
> + */
> +
> +#include <linux/cache.h>
> +#include <linux/err.h>
> +#include <linux/export.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/types.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/spi/spi.h>
> +
> +#define MCP41010_MAX_WIPERS	2
> +#define MCP41010_WRITE		BIT(4)
> +#define MCP41010_WIPER_MAX	255
> +#define MCP41010_WIPER_CHANNEL	BIT(0)
> +
> +struct mcp41010_cfg {
> +	int wipers;
> +	int kohms;
> +};
> +
> +enum mcp41010_type {
> +	MCP41010,
> +	MCP41050,
> +	MCP41100,
> +	MCP42010,
> +	MCP42050,
> +	MCP42100,
> +};
> +
> +static const struct mcp41010_cfg mcp41010_cfg[] = {
> +	[MCP41010] = { .wipers = 1, .kohms =  10, },
> +	[MCP41050] = { .wipers = 1, .kohms =  50, },
> +	[MCP41100] = { .wipers = 1, .kohms = 100, },
> +	[MCP42010] = { .wipers = 2, .kohms =  10, },
> +	[MCP42050] = { .wipers = 2, .kohms =  50, },
> +	[MCP42100] = { .wipers = 2, .kohms = 100, },
> +};
> +
> +struct mcp41010_data {
> +	struct spi_device *spi;
> +	const struct mcp41010_cfg *cfg;
> +	struct mutex lock; /* Protect write sequences */
> +	unsigned int value[MCP41010_MAX_WIPERS]; /* Cache wiper values */
> +	u8 buf[2] ____cacheline_aligned;
> +};
> +
> +#define MCP41010_CHANNEL(ch) {					\
> +	.type = IIO_RESISTANCE,					\
> +	.indexed = 1,						\
> +	.output = 1,						\
> +	.channel = (ch),					\
> +	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
> +	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
> +}
> +
> +static const struct iio_chan_spec mcp41010_channels[] = {
> +	MCP41010_CHANNEL(0),
> +	MCP41010_CHANNEL(1),
> +};
> +
> +static int mcp41010_read_raw(struct iio_dev *indio_dev,
> +			    struct iio_chan_spec const *chan,
> +			    int *val, int *val2, long mask)
> +{
> +	struct mcp41010_data *data = iio_priv(indio_dev);
> +	int channel = chan->channel;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		*val = data->value[channel];
> +		return IIO_VAL_INT;
> +
> +	case IIO_CHAN_INFO_SCALE:
> +		*val = 1000 * data->cfg->kohms;
> +		*val2 = MCP41010_WIPER_MAX;
> +		return IIO_VAL_FRACTIONAL;
> +	}
> +
> +	return -EINVAL;
> +}
> +
> +static int mcp41010_write_raw(struct iio_dev *indio_dev,
> +			     struct iio_chan_spec const *chan,
> +			     int val, int val2, long mask)
> +{
> +	int err;
> +	struct mcp41010_data *data = iio_priv(indio_dev);
> +	int channel = chan->channel;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		if (val > MCP41010_WIPER_MAX || val < 0)
> +			return -EINVAL;
> +		break;
> +
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	mutex_lock(&data->lock);
> +
> +	data->buf[0] = MCP41010_WIPER_CHANNEL << channel;
> +	data->buf[0] |= MCP41010_WRITE;
> +	data->buf[1] = val & 0xff;
> +
> +	err = spi_write(data->spi, data->buf, 2);
> +	if (!err)
> +		data->value[channel] = val;
> +
> +	mutex_unlock(&data->lock);
> +
> +	return err;
> +}
> +
> +static const struct iio_info mcp41010_info = {
> +	.read_raw = mcp41010_read_raw,
> +	.write_raw = mcp41010_write_raw,
> +};
> +
> +static int mcp41010_probe(struct spi_device *spi)
> +{
> +	int err;
> +	struct device *dev = &spi->dev;
> +	unsigned long devid = spi_get_device_id(spi)->driver_data;

I guess the calculation of devid value can now be done only when
of_device_get_match_data() did not return config.

> +	struct mcp41010_data *data;
> +	struct iio_dev *indio_dev;
> +
> +	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	data = iio_priv(indio_dev);
> +	spi_set_drvdata(spi, indio_dev);
> +	data->spi = spi;
> +	data->cfg = of_device_get_match_data(&spi->dev);
> +	if (!data->cfg)
> +		data->cfg = &mcp41010_cfg[devid];
> +
> +	mutex_init(&data->lock);
> +
> +	indio_dev->dev.parent = dev;
> +	indio_dev->info = &mcp41010_info;
> +	indio_dev->channels = mcp41010_channels;
> +	indio_dev->num_channels = data->cfg->wipers;
> +	indio_dev->name = spi_get_device_id(spi)->name;
> +
> +	err = devm_iio_device_register(dev, indio_dev);
> +	if (err) {
> +		dev_info(&spi->dev, "Unable to register %s\n", indio_dev->name);
> +		return err;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id mcp41010_match[] = {
> +	{ .compatible = "microchip,mcp41010",
> +		.data = &mcp41010_cfg[MCP41010] },
> +	{ .compatible = "microchip,mcp41050",
> +		.data = &mcp41010_cfg[MCP41050] },
> +	{ .compatible = "microchip,mcp41100",
> +		.data = &mcp41010_cfg[MCP41100] },
> +	{ .compatible = "microchip,mcp42010",
> +		.data = &mcp41010_cfg[MCP42010] },
> +	{ .compatible = "microchip,mcp42050",
> +		.data = &mcp41010_cfg[MCP42050] },
> +	{ .compatible = "microchip,mcp42100",
> +		.data = &mcp41010_cfg[MCP42100] },

It looks that you can fit these into 80 chars column.

> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, mcp41010_match);
> +
> +static const struct spi_device_id mcp41010_id[] = {
> +	{ "mcp41010", MCP41010 },
> +	{ "mcp41050", MCP41050 },
> +	{ "mcp41100", MCP41100 },
> +	{ "mcp42010", MCP42010 },
> +	{ "mcp42050", MCP42050 },
> +	{ "mcp42100", MCP42100 },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(spi, mcp41010_id);
> +
> +static struct spi_driver mcp41010_driver = {
> +	.driver = {
> +		.name	= "mcp41010",
> +		.of_match_table = mcp41010_match,
> +	},
> +	.probe		= mcp41010_probe,
> +	.id_table	= mcp41010_id,
> +};
> +
> +module_spi_driver(mcp41010_driver);
> +
> +MODULE_AUTHOR("Chris Coffey <cmc@babblebit.net>");
> +MODULE_DESCRIPTION("MCP41010 digital potentiometer");
> +MODULE_LICENSE("GPL v2");

-- 
Slawomir Stepien

Re: [PATCH v2 1/2] dt-bindings: iio: potentiometer: Add Microchip MCP41xxx/42xxx

[Jonathan Cameron]

On Wed, 14 Nov 2018 11:01:41 +0100
Slawomir Stepien <sst@poczta.fm> wrote:

> On lis 14, 2018 09:52, Chris Coffey wrote:
> > This patch adds device tree documentation for the Microchip
> > MCP41xxx/42xxx family of digital potentiometers.  
> 
> Hi
> 
> One note inline.
> 
> > Signed-off-by: Chris Coffey <cmc@babblebit.net>
> > ---
> >  .../bindings/iio/potentiometer/mcp41010.txt        | 29 ++++++++++++++++++++++
> >  1 file changed, 29 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> > new file mode 100644
> > index 0000000000..17565acace
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> > @@ -0,0 +1,29 @@
> > +* Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer
> > +  driver
> > +
> > +Datasheet publicly available at:
> > +http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
> > +
> > +The node for this driver must be a child node of a SPI controller, hence
> > +all mandatory properties described in
> > +
> > +        Documentation/devicetree/bindings/spi/spi-bus.txt
> > +
> > +must be specified.
> > +
> > +Required properties:
> > +	- compatible:  	Must be one of the following, depending on the
> > +			model:
> > +			"microchip,mcp41010"
> > +			"microchip,mcp41050"
> > +			"microchip,mcp41100"
> > +			"microchip,mcp42010"
> > +			"microchip,mcp42050"
> > +			"microchip,mcp42100"
> > +
> > +Example:
> > +mcp41010: potentiometer@0 {
> > +	compatible = "mcp41010";  
> 
> Missing company name in compatible.
Also don't need (or want) the precursor
mcp41010: for an example.

potentiometer@0 {
	compatible = "microchip,mcp41010";
	reg = <0>;
	spi-max-frequency = <500000>;
};

> 
> > +	reg = <0>;
> > +	spi-max-frequency = <500000>;
> > +};  
> 

Re: [PATCH v2 2/2] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx

[Jonathan Cameron]

On Wed, 14 Nov 2018 11:30:15 +0100
Slawomir Stepien <sst@poczta.fm> wrote:

> On lis 14, 2018 09:52, Chris Coffey wrote:
> > This patch adds driver support for the Microchip MCP41xxx/42xxx family
> > of digital potentiometers:
> > 
> > DEVICE      Wipers  Positions   Resistance (kOhm)
> > MCP41010    1       256         10
> > MCP41050    1       256         50
> > MCP41100    1       256         100
> > MCP42010    2       256         10
> > MCP42050    2       256         50
> > MCP42100    2       256         100
> > 
> > Datasheet: http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf  
> 
> Hi
> 
> Some hints inline.
A few minor comments from me.

Thanks,

Jonathan

> 
> > Signed-off-by: Chris Coffey <cmc@babblebit.net>
> > ---
> >  drivers/iio/potentiometer/Kconfig    |  12 ++
> >  drivers/iio/potentiometer/Makefile   |   1 +
> >  drivers/iio/potentiometer/mcp41010.c | 216 +++++++++++++++++++++++++++++++++++
> >  3 files changed, 229 insertions(+)
> >  create mode 100644 drivers/iio/potentiometer/mcp41010.c
> > 
> > diff --git a/drivers/iio/potentiometer/Kconfig b/drivers/iio/potentiometer/Kconfig
> > index 79ec2eba49..6303cbe799 100644
> > --- a/drivers/iio/potentiometer/Kconfig
> > +++ b/drivers/iio/potentiometer/Kconfig
> > @@ -90,6 +90,18 @@ config MCP4531
> >  	  To compile this driver as a module, choose M here: the
> >  	  module will be called mcp4531.
> >  
> > +config MCP41010
> > +	tristate "Microchip MCP41xxx/MCP42xxx Digital Potentiometer driver"
> > +	depends on SPI
> > +	help
> > +	  Say yes here to build support for the Microchip
> > +	  MCP41010, MCP41050, MCP41100,
> > +	  MCP42010, MCP42050, MCP42100
> > +	  digital potentiometer chips.
> > +
> > +	  To compile this driver as a module, choose M here: the
> > +	  module will be called mcp41010.
> > +
> >  config TPL0102
> >  	tristate "Texas Instruments digital potentiometer driver"
> >  	depends on I2C
> > diff --git a/drivers/iio/potentiometer/Makefile b/drivers/iio/potentiometer/Makefile
> > index 4af657883c..8ff55138cf 100644
> > --- a/drivers/iio/potentiometer/Makefile
> > +++ b/drivers/iio/potentiometer/Makefile
> > @@ -11,4 +11,5 @@ obj-$(CONFIG_MAX5487) += max5487.o
> >  obj-$(CONFIG_MCP4018) += mcp4018.o
> >  obj-$(CONFIG_MCP4131) += mcp4131.o
> >  obj-$(CONFIG_MCP4531) += mcp4531.o
> > +obj-$(CONFIG_MCP41010) += mcp41010.o
> >  obj-$(CONFIG_TPL0102) += tpl0102.o
> > diff --git a/drivers/iio/potentiometer/mcp41010.c b/drivers/iio/potentiometer/mcp41010.c
> > new file mode 100644
> > index 0000000000..19fa50c9ee
> > --- /dev/null
> > +++ b/drivers/iio/potentiometer/mcp41010.c
> > @@ -0,0 +1,216 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Industrial I/O driver for Microchip digital potentiometers
> > + *
> > + * Copyright (c) 2018 Chris Coffey <cmc@babblebit.net>
> > + * Based on: Slawomir Stepien's code from mcp4131.c
> > + *
> > + * Datasheet: http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
> > + *
> > + * DEVID	#Wipers	#Positions	Resistance (kOhm)
> > + * mcp41010	1	256		10
> > + * mcp41050	1	256		50
> > + * mcp41100	1	256		100
> > + * mcp42010	2	256		10
> > + * mcp42050	2	256		50
> > + * mcp42100	2	256		100
> > + */
> > +
> > +#include <linux/cache.h>
> > +#include <linux/err.h>
> > +#include <linux/export.h>
> > +#include <linux/iio/iio.h>
> > +#include <linux/iio/types.h>
> > +#include <linux/module.h>
> > +#include <linux/mutex.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/spi/spi.h>
> > +
> > +#define MCP41010_MAX_WIPERS	2
> > +#define MCP41010_WRITE		BIT(4)
> > +#define MCP41010_WIPER_MAX	255
> > +#define MCP41010_WIPER_CHANNEL	BIT(0)
> > +
> > +struct mcp41010_cfg {
> > +	int wipers;
> > +	int kohms;
> > +};
> > +
> > +enum mcp41010_type {
> > +	MCP41010,
> > +	MCP41050,
> > +	MCP41100,
> > +	MCP42010,
> > +	MCP42050,
> > +	MCP42100,
> > +};
> > +
> > +static const struct mcp41010_cfg mcp41010_cfg[] = {
> > +	[MCP41010] = { .wipers = 1, .kohms =  10, },
> > +	[MCP41050] = { .wipers = 1, .kohms =  50, },
> > +	[MCP41100] = { .wipers = 1, .kohms = 100, },
> > +	[MCP42010] = { .wipers = 2, .kohms =  10, },
> > +	[MCP42050] = { .wipers = 2, .kohms =  50, },
> > +	[MCP42100] = { .wipers = 2, .kohms = 100, },
> > +};
> > +
> > +struct mcp41010_data {
> > +	struct spi_device *spi;
> > +	const struct mcp41010_cfg *cfg;
> > +	struct mutex lock; /* Protect write sequences */
> > +	unsigned int value[MCP41010_MAX_WIPERS]; /* Cache wiper values */
> > +	u8 buf[2] ____cacheline_aligned;
> > +};
> > +
> > +#define MCP41010_CHANNEL(ch) {					\
> > +	.type = IIO_RESISTANCE,					\
> > +	.indexed = 1,						\
> > +	.output = 1,						\
> > +	.channel = (ch),					\
> > +	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
> > +	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
> > +}
> > +
> > +static const struct iio_chan_spec mcp41010_channels[] = {
> > +	MCP41010_CHANNEL(0),
> > +	MCP41010_CHANNEL(1),
> > +};
> > +
> > +static int mcp41010_read_raw(struct iio_dev *indio_dev,
> > +			    struct iio_chan_spec const *chan,
> > +			    int *val, int *val2, long mask)
> > +{
> > +	struct mcp41010_data *data = iio_priv(indio_dev);
> > +	int channel = chan->channel;
> > +
> > +	switch (mask) {
> > +	case IIO_CHAN_INFO_RAW:
> > +		*val = data->value[channel];
> > +		return IIO_VAL_INT;
> > +
> > +	case IIO_CHAN_INFO_SCALE:
> > +		*val = 1000 * data->cfg->kohms;
> > +		*val2 = MCP41010_WIPER_MAX;
> > +		return IIO_VAL_FRACTIONAL;
> > +	}
> > +
> > +	return -EINVAL;
> > +}
> > +
> > +static int mcp41010_write_raw(struct iio_dev *indio_dev,
> > +			     struct iio_chan_spec const *chan,
> > +			     int val, int val2, long mask)
> > +{
> > +	int err;
> > +	struct mcp41010_data *data = iio_priv(indio_dev);
> > +	int channel = chan->channel;
> > +
> > +	switch (mask) {
> > +	case IIO_CHAN_INFO_RAW:
> > +		if (val > MCP41010_WIPER_MAX || val < 0)
> > +			return -EINVAL;
> > +		break;
> > +
> > +	default:
> > +		return -EINVAL;
> > +	}

This is an unusual code structure.  Given any additions to the
above switch will presumably involve changes to the below, I think
we should either have all the below in the switch case, or
we should just use an if statement to check if it's not
IIO_CHAN_INFO_RAW.

> > +
> > +	mutex_lock(&data->lock);
> > +
> > +	data->buf[0] = MCP41010_WIPER_CHANNEL << channel;
> > +	data->buf[0] |= MCP41010_WRITE;
> > +	data->buf[1] = val & 0xff;
> > +
> > +	err = spi_write(data->spi, data->buf, 2);
> > +	if (!err)
> > +		data->value[channel] = val;
> > +
> > +	mutex_unlock(&data->lock);
> > +
> > +	return err;
> > +}
> > +
> > +static const struct iio_info mcp41010_info = {
> > +	.read_raw = mcp41010_read_raw,
> > +	.write_raw = mcp41010_write_raw,
> > +};
> > +
> > +static int mcp41010_probe(struct spi_device *spi)
> > +{
> > +	int err;
> > +	struct device *dev = &spi->dev;
> > +	unsigned long devid = spi_get_device_id(spi)->driver_data;  
> 
> I guess the calculation of devid value can now be done only when
> of_device_get_match_data() did not return config.
> 
> > +	struct mcp41010_data *data;
> > +	struct iio_dev *indio_dev;
> > +
> > +	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
> > +	if (!indio_dev)
> > +		return -ENOMEM;
> > +
> > +	data = iio_priv(indio_dev);
> > +	spi_set_drvdata(spi, indio_dev);
> > +	data->spi = spi;
> > +	data->cfg = of_device_get_match_data(&spi->dev);
> > +	if (!data->cfg)
> > +		data->cfg = &mcp41010_cfg[devid];
> > +
> > +	mutex_init(&data->lock);
> > +
> > +	indio_dev->dev.parent = dev;
> > +	indio_dev->info = &mcp41010_info;
> > +	indio_dev->channels = mcp41010_channels;
> > +	indio_dev->num_channels = data->cfg->wipers;
> > +	indio_dev->name = spi_get_device_id(spi)->name;

It is a bit odd to use the of match for the data, but
then get the name always from the spi_device_id table.
We probably need a separate source for the names such
as in the config structure.


> > +
> > +	err = devm_iio_device_register(dev, indio_dev);
> > +	if (err) {
> > +		dev_info(&spi->dev, "Unable to register %s\n", indio_dev->name);
> > +		return err;
> > +	}
> > +
> > +	return 0;

Drop the return out of the bracket and return err here. It's a trivial
improvement, but as one of the static checkers tends to point this out,
we'll only end up with a patch changing it shortly if we don't do it
now.

	err = devm_iio_device_register(dev, indio_dev);
	if (err)
		dev_info(&spi->dev, "Unable to register %s\n", indio_dev->name);

	return err;
	
> > +}
> > +
> > +static const struct of_device_id mcp41010_match[] = {
> > +	{ .compatible = "microchip,mcp41010",
> > +		.data = &mcp41010_cfg[MCP41010] },
> > +	{ .compatible = "microchip,mcp41050",
> > +		.data = &mcp41010_cfg[MCP41050] },
> > +	{ .compatible = "microchip,mcp41100",
> > +		.data = &mcp41010_cfg[MCP41100] },
> > +	{ .compatible = "microchip,mcp42010",
> > +		.data = &mcp41010_cfg[MCP42010] },
> > +	{ .compatible = "microchip,mcp42050",
> > +		.data = &mcp41010_cfg[MCP42050] },
> > +	{ .compatible = "microchip,mcp42100",
> > +		.data = &mcp41010_cfg[MCP42100] },  
> 
> It looks that you can fit these into 80 chars column.
> 
> > +	{}
> > +};
> > +MODULE_DEVICE_TABLE(of, mcp41010_match);
> > +
> > +static const struct spi_device_id mcp41010_id[] = {
> > +	{ "mcp41010", MCP41010 },
> > +	{ "mcp41050", MCP41050 },
> > +	{ "mcp41100", MCP41100 },
> > +	{ "mcp42010", MCP42010 },
> > +	{ "mcp42050", MCP42050 },
> > +	{ "mcp42100", MCP42100 },
> > +	{}
> > +};
> > +MODULE_DEVICE_TABLE(spi, mcp41010_id);
> > +
> > +static struct spi_driver mcp41010_driver = {
> > +	.driver = {
> > +		.name	= "mcp41010",
> > +		.of_match_table = mcp41010_match,
> > +	},
> > +	.probe		= mcp41010_probe,
> > +	.id_table	= mcp41010_id,
> > +};
> > +
> > +module_spi_driver(mcp41010_driver);
> > +
> > +MODULE_AUTHOR("Chris Coffey <cmc@babblebit.net>");
> > +MODULE_DESCRIPTION("MCP41010 digital potentiometer");
> > +MODULE_LICENSE("GPL v2");  
> 

Re: [PATCH v2 1/2] dt-bindings: iio: potentiometer: Add Microchip MCP41xxx/42xxx

[Chris Coffey]

On Wed, Nov 14, 2018 at 11:01:41AM +0100, Slawomir Stepien wrote:
> On lis 14, 2018 09:52, Chris Coffey wrote:
> > This patch adds device tree documentation for the Microchip
> > MCP41xxx/42xxx family of digital potentiometers.
> 
> Hi
> 
> One note inline.
> 

Hi Stepien,

Thank you for the reviews. One comment below.

> > Signed-off-by: Chris Coffey <cmc@babblebit.net>
> > ---
> >  .../bindings/iio/potentiometer/mcp41010.txt        | 29 ++++++++++++++++++++++
> >  1 file changed, 29 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> > new file mode 100644
> > index 0000000000..17565acace
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/potentiometer/mcp41010.txt
> > @@ -0,0 +1,29 @@
> > +* Microchip MCP41010/41050/41100/42010/42050/42100 Digital Potentiometer
> > +  driver
> > +
> > +Datasheet publicly available at:
> > +http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf
> > +
> > +The node for this driver must be a child node of a SPI controller, hence
> > +all mandatory properties described in
> > +
> > +        Documentation/devicetree/bindings/spi/spi-bus.txt
> > +
> > +must be specified.
> > +
> > +Required properties:
> > +	- compatible:  	Must be one of the following, depending on the
> > +			model:
> > +			"microchip,mcp41010"
> > +			"microchip,mcp41050"
> > +			"microchip,mcp41100"
> > +			"microchip,mcp42010"
> > +			"microchip,mcp42050"
> > +			"microchip,mcp42100"
> > +
> > +Example:
> > +mcp41010: potentiometer@0 {
> > +	compatible = "mcp41010";
> 
> Missing company name in compatible.
> 

Gah! A classic case of my mind seeing what it wanted to see, instead of
what was actually there.

> > +	reg = <0>;
> > +	spi-max-frequency = <500000>;
> > +};
> 
> -- 
> Slawomir Stepien

Re: [PATCH v2 2/2] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx

[Chris Coffey]

On Fri, Nov 16, 2018 at 06:10:43PM +0000, Jonathan Cameron wrote:
> On Wed, 14 Nov 2018 11:30:15 +0100
> Slawomir Stepien <sst@poczta.fm> wrote:
> 
> > On lis 14, 2018 09:52, Chris Coffey wrote:
> > > This patch adds driver support for the Microchip MCP41xxx/42xxx family
> > > of digital potentiometers:
> > > 
> > > DEVICE      Wipers  Positions   Resistance (kOhm)
> > > MCP41010    1       256         10
> > > MCP41050    1       256         50
> > > MCP41100    1       256         100
> > > MCP42010    2       256         10
> > > MCP42050    2       256         50
> > > MCP42100    2       256         100
> > > 
> > > Datasheet: http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf  
> > 
> > Hi
> > 
> > Some hints inline.
> A few minor comments from me.
> 
> Thanks,
> 
> Jonathan
> 

Thank you for the review; I have one question below.

Thanks,
Chris

[snip]

> > > +static int mcp41010_probe(struct spi_device *spi)
> > > +{
> > > +	int err;
> > > +	struct device *dev = &spi->dev;
> > > +	unsigned long devid = spi_get_device_id(spi)->driver_data;  
> > 
> > I guess the calculation of devid value can now be done only when
> > of_device_get_match_data() did not return config.
> > 
> > > +	struct mcp41010_data *data;
> > > +	struct iio_dev *indio_dev;
> > > +
> > > +	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
> > > +	if (!indio_dev)
> > > +		return -ENOMEM;
> > > +
> > > +	data = iio_priv(indio_dev);
> > > +	spi_set_drvdata(spi, indio_dev);
> > > +	data->spi = spi;
> > > +	data->cfg = of_device_get_match_data(&spi->dev);
> > > +	if (!data->cfg)
> > > +		data->cfg = &mcp41010_cfg[devid];
> > > +
> > > +	mutex_init(&data->lock);
> > > +
> > > +	indio_dev->dev.parent = dev;
> > > +	indio_dev->info = &mcp41010_info;
> > > +	indio_dev->channels = mcp41010_channels;
> > > +	indio_dev->num_channels = data->cfg->wipers;
> > > +	indio_dev->name = spi_get_device_id(spi)->name;
> 
> It is a bit odd to use the of match for the data, but
> then get the name always from the spi_device_id table.
> We probably need a separate source for the names such
> as in the config structure.
> 

I see what you mean. Is this something you'd like me to do for v3 (add
the names to the config struct), or were you thinking more in the
abstract, "this is something we should consider doing in the future"?

[snip]

Re: [PATCH v2 2/2] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx

[Jonathan Cameron]

On Sat, 17 Nov 2018 20:31:30 +0000
Chris Coffey <cmc@babblebit.net> wrote:

> On Fri, Nov 16, 2018 at 06:10:43PM +0000, Jonathan Cameron wrote:
> > On Wed, 14 Nov 2018 11:30:15 +0100
> > Slawomir Stepien <sst@poczta.fm> wrote:
> >   
> > > On lis 14, 2018 09:52, Chris Coffey wrote:  
> > > > This patch adds driver support for the Microchip MCP41xxx/42xxx family
> > > > of digital potentiometers:
> > > > 
> > > > DEVICE      Wipers  Positions   Resistance (kOhm)
> > > > MCP41010    1       256         10
> > > > MCP41050    1       256         50
> > > > MCP41100    1       256         100
> > > > MCP42010    2       256         10
> > > > MCP42050    2       256         50
> > > > MCP42100    2       256         100
> > > > 
> > > > Datasheet: http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf    
> > > 
> > > Hi
> > > 
> > > Some hints inline.  
> > A few minor comments from me.
> > 
> > Thanks,
> > 
> > Jonathan
> >   
> 
> Thank you for the review; I have one question below.
> 
> Thanks,
> Chris
> 
> [snip]
> 
> > > > +static int mcp41010_probe(struct spi_device *spi)
> > > > +{
> > > > +	int err;
> > > > +	struct device *dev = &spi->dev;
> > > > +	unsigned long devid = spi_get_device_id(spi)->driver_data;    
> > > 
> > > I guess the calculation of devid value can now be done only when
> > > of_device_get_match_data() did not return config.
> > >   
> > > > +	struct mcp41010_data *data;
> > > > +	struct iio_dev *indio_dev;
> > > > +
> > > > +	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
> > > > +	if (!indio_dev)
> > > > +		return -ENOMEM;
> > > > +
> > > > +	data = iio_priv(indio_dev);
> > > > +	spi_set_drvdata(spi, indio_dev);
> > > > +	data->spi = spi;
> > > > +	data->cfg = of_device_get_match_data(&spi->dev);
> > > > +	if (!data->cfg)
> > > > +		data->cfg = &mcp41010_cfg[devid];
> > > > +
> > > > +	mutex_init(&data->lock);
> > > > +
> > > > +	indio_dev->dev.parent = dev;
> > > > +	indio_dev->info = &mcp41010_info;
> > > > +	indio_dev->channels = mcp41010_channels;
> > > > +	indio_dev->num_channels = data->cfg->wipers;
> > > > +	indio_dev->name = spi_get_device_id(spi)->name;  
> > 
> > It is a bit odd to use the of match for the data, but
> > then get the name always from the spi_device_id table.
> > We probably need a separate source for the names such
> > as in the config structure.
> >   
> 
> I see what you mean. Is this something you'd like me to do for v3 (add
> the names to the config struct), or were you thinking more in the
> abstract, "this is something we should consider doing in the future"?
If we are going to explicitly support he of_device_get_match_data
path then we should do the names as well in v3.

Just end up with an odd half measure otherwise!

Jonathan
> 
> [snip]

Re: [PATCH v2 2/2] iio: potentiometer: Add driver for Microchip MCP41xxx/42xxx

[Jonathan Cameron]

On Sat, 17 Nov 2018 20:31:30 +0000
Chris Coffey <cmc@babblebit.net> wrote:

> On Fri, Nov 16, 2018 at 06:10:43PM +0000, Jonathan Cameron wrote:
> > On Wed, 14 Nov 2018 11:30:15 +0100
> > Slawomir Stepien <sst@poczta.fm> wrote:
> >   
> > > On lis 14, 2018 09:52, Chris Coffey wrote:  
> > > > This patch adds driver support for the Microchip MCP41xxx/42xxx family
> > > > of digital potentiometers:
> > > > 
> > > > DEVICE      Wipers  Positions   Resistance (kOhm)
> > > > MCP41010    1       256         10
> > > > MCP41050    1       256         50
> > > > MCP41100    1       256         100
> > > > MCP42010    2       256         10
> > > > MCP42050    2       256         50
> > > > MCP42100    2       256         100
> > > > 
> > > > Datasheet: http://ww1.microchip.com/downloads/en/devicedoc/11195c.pdf    
> > > 
> > > Hi
> > > 
> > > Some hints inline.  
> > A few minor comments from me.
> > 
> > Thanks,
> > 
> > Jonathan
> >   
> 
> Thank you for the review; I have one question below.
> 
> Thanks,
> Chris
> 
> [snip]
> 
> > > > +static int mcp41010_probe(struct spi_device *spi)
> > > > +{
> > > > +	int err;
> > > > +	struct device *dev = &spi->dev;
> > > > +	unsigned long devid = spi_get_device_id(spi)->driver_data;    
> > > 
> > > I guess the calculation of devid value can now be done only when
> > > of_device_get_match_data() did not return config.
> > >   
> > > > +	struct mcp41010_data *data;
> > > > +	struct iio_dev *indio_dev;
> > > > +
> > > > +	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
> > > > +	if (!indio_dev)
> > > > +		return -ENOMEM;
> > > > +
> > > > +	data = iio_priv(indio_dev);
> > > > +	spi_set_drvdata(spi, indio_dev);
> > > > +	data->spi = spi;
> > > > +	data->cfg = of_device_get_match_data(&spi->dev);
> > > > +	if (!data->cfg)
> > > > +		data->cfg = &mcp41010_cfg[devid];
> > > > +
> > > > +	mutex_init(&data->lock);
> > > > +
> > > > +	indio_dev->dev.parent = dev;
> > > > +	indio_dev->info = &mcp41010_info;
> > > > +	indio_dev->channels = mcp41010_channels;
> > > > +	indio_dev->num_channels = data->cfg->wipers;
> > > > +	indio_dev->name = spi_get_device_id(spi)->name;  
> > 
> > It is a bit odd to use the of match for the data, but
> > then get the name always from the spi_device_id table.
> > We probably need a separate source for the names such
> > as in the config structure.
> >   
> 
> I see what you mean. Is this something you'd like me to do for v3 (add
> the names to the config struct), or were you thinking more in the
> abstract, "this is something we should consider doing in the future"?
If we are going to explicitly support he of_device_get_match_data
path then we should do the names as well in v3.

Just end up with an odd half measure otherwise!

Jonathan
> 
> [snip]