* [PATCH net-next] qlcnic: remove set but not used variables 'cur_rings, max_hw_rings, tx_desc_info'
@ 2018-11-28 12:29 YueHaibing
2018-11-28 12:37 ` Shaikh, Shahed
2018-11-28 19:10 ` David Miller
0 siblings, 2 replies; 3+ messages in thread
From: YueHaibing @ 2018-11-28 12:29 UTC (permalink / raw)
To: davem, Shahed.Shaikh, manish.chopra, Dept-GELinuxNICDev
Cc: linux-kernel, netdev, YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c:4011:5:
warning: variable 'max_hw_rings' set but not used [-Wunused-but-set-variable]
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c:4013:6:
warning: variable 'cur_rings' set but not used [-Wunused-but-set-variable]
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c:2996:25:
warning: variable 'tx_desc_info' set but not used [-Wunused-but-set-variable]
'cur_rings, max_hw_rings' never used since introduction in commit
34e8c406fda5 ("qlcnic: refactor Tx/SDS ring calculation and validation in driver.")
'tx_desc_info' never used since commit
95b3890ae39f ("qlcnic: Enhance Tx timeout debugging.")
Also 'queue_type' only can be QLCNIC_RX_QUEUE/QLCNIC_TX_QUEUE,
so make a trival cleanup on if statement.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
---
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 13 ++-----------
1 file changed, 2 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index d42ba22..16d0479 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -2993,10 +2993,8 @@ int qlcnic_check_temp(struct qlcnic_adapter *adapter)
static inline void dump_tx_ring_desc(struct qlcnic_host_tx_ring *tx_ring)
{
int i;
- struct cmd_desc_type0 *tx_desc_info;
for (i = 0; i < tx_ring->num_desc; i++) {
- tx_desc_info = &tx_ring->desc_head[i];
pr_info("TX Desc: %d\n", i);
print_hex_dump(KERN_INFO, "TX: ", DUMP_PREFIX_OFFSET, 16, 1,
&tx_ring->desc_head[i],
@@ -4008,19 +4006,12 @@ int qlcnic_validate_rings(struct qlcnic_adapter *adapter, __u32 ring_cnt,
int queue_type)
{
struct net_device *netdev = adapter->netdev;
- u8 max_hw_rings = 0;
char buf[8];
- int cur_rings;
- if (queue_type == QLCNIC_RX_QUEUE) {
- max_hw_rings = adapter->max_sds_rings;
- cur_rings = adapter->drv_sds_rings;
+ if (queue_type == QLCNIC_RX_QUEUE)
strcpy(buf, "SDS");
- } else if (queue_type == QLCNIC_TX_QUEUE) {
- max_hw_rings = adapter->max_tx_rings;
- cur_rings = adapter->drv_tx_rings;
+ else
strcpy(buf, "Tx");
- }
if (!is_power_of_2(ring_cnt)) {
netdev_err(netdev, "%s rings value should be a power of 2\n",
--
2.7.0
^ permalink raw reply related [flat|nested] 3+ messages in thread
* RE: [PATCH net-next] qlcnic: remove set but not used variables 'cur_rings, max_hw_rings, tx_desc_info'
2018-11-28 12:29 [PATCH net-next] qlcnic: remove set but not used variables 'cur_rings, max_hw_rings, tx_desc_info' YueHaibing
@ 2018-11-28 12:37 ` Shaikh, Shahed
2018-11-28 19:10 ` David Miller
1 sibling, 0 replies; 3+ messages in thread
From: Shaikh, Shahed @ 2018-11-28 12:37 UTC (permalink / raw)
To: YueHaibing, davem, Chopra, Manish, Dept-GE Linux NIC Dev
Cc: linux-kernel, netdev
> -----Original Message-----
> From: YueHaibing <yuehaibing@huawei.com>
> Sent: Wednesday, November 28, 2018 6:00 PM
> To: davem@davemloft.net; Shaikh, Shahed <Shahed.Shaikh@cavium.com>;
> Chopra, Manish <Manish.Chopra@cavium.com>; Dept-GE Linux NIC Dev
> <Dept-GELinuxNICDev@cavium.com>
> Cc: linux-kernel@vger.kernel.org; netdev@vger.kernel.org; YueHaibing
> <yuehaibing@huawei.com>
> Subject: [PATCH net-next] qlcnic: remove set but not used variables
> 'cur_rings, max_hw_rings, tx_desc_info'
>
>
> Fixes gcc '-Wunused-but-set-variable' warning:
>
> drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c:4011:5:
> warning: variable 'max_hw_rings' set but not used [-Wunused-but-set-
> variable]
> drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c:4013:6:
> warning: variable 'cur_rings' set but not used [-Wunused-but-set-variable]
> drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c:2996:25:
> warning: variable 'tx_desc_info' set but not used [-Wunused-but-set-
> variable]
>
> 'cur_rings, max_hw_rings' never used since introduction in commit
> 34e8c406fda5 ("qlcnic: refactor Tx/SDS ring calculation and validation in
> driver.")
> 'tx_desc_info' never used since commit
> 95b3890ae39f ("qlcnic: Enhance Tx timeout debugging.")
> Also 'queue_type' only can be QLCNIC_RX_QUEUE/QLCNIC_TX_QUEUE,
> so make a trival cleanup on if statement.
>
> Signed-off-by: YueHaibing <yuehaibing@huawei.com>
> ---
> drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 13 ++-----------
> 1 file changed, 2 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
> b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
> index d42ba22..16d0479 100644
> --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
> +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
> @@ -2993,10 +2993,8 @@ int qlcnic_check_temp(struct qlcnic_adapter
> *adapter)
> static inline void dump_tx_ring_desc(struct qlcnic_host_tx_ring *tx_ring)
> {
> int i;
> - struct cmd_desc_type0 *tx_desc_info;
>
> for (i = 0; i < tx_ring->num_desc; i++) {
> - tx_desc_info = &tx_ring->desc_head[i];
> pr_info("TX Desc: %d\n", i);
> print_hex_dump(KERN_INFO, "TX: ", DUMP_PREFIX_OFFSET, 16, 1,
> &tx_ring->desc_head[i],
> @@ -4008,19 +4006,12 @@ int qlcnic_validate_rings(struct qlcnic_adapter
> *adapter, __u32 ring_cnt,
> int queue_type)
> {
> struct net_device *netdev = adapter->netdev;
> - u8 max_hw_rings = 0;
> char buf[8];
> - int cur_rings;
>
> - if (queue_type == QLCNIC_RX_QUEUE) {
> - max_hw_rings = adapter->max_sds_rings;
> - cur_rings = adapter->drv_sds_rings;
> + if (queue_type == QLCNIC_RX_QUEUE)
> strcpy(buf, "SDS");
> - } else if (queue_type == QLCNIC_TX_QUEUE) {
> - max_hw_rings = adapter->max_tx_rings;
> - cur_rings = adapter->drv_tx_rings;
> + else
> strcpy(buf, "Tx");
> - }
>
> if (!is_power_of_2(ring_cnt)) {
> netdev_err(netdev, "%s rings value should be a power of 2\n",
> --
> 2.7.0
>
Looks good.
Acked-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Thanks,
Shahed
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH net-next] qlcnic: remove set but not used variables 'cur_rings, max_hw_rings, tx_desc_info'
2018-11-28 12:29 [PATCH net-next] qlcnic: remove set but not used variables 'cur_rings, max_hw_rings, tx_desc_info' YueHaibing
2018-11-28 12:37 ` Shaikh, Shahed
@ 2018-11-28 19:10 ` David Miller
1 sibling, 0 replies; 3+ messages in thread
From: David Miller @ 2018-11-28 19:10 UTC (permalink / raw)
To: yuehaibing
Cc: Shahed.Shaikh, manish.chopra, Dept-GELinuxNICDev, linux-kernel, netdev
From: YueHaibing <yuehaibing@huawei.com>
Date: Wed, 28 Nov 2018 20:29:39 +0800
> Fixes gcc '-Wunused-but-set-variable' warning:
>
> drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c:4011:5:
> warning: variable 'max_hw_rings' set but not used [-Wunused-but-set-variable]
> drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c:4013:6:
> warning: variable 'cur_rings' set but not used [-Wunused-but-set-variable]
> drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c:2996:25:
> warning: variable 'tx_desc_info' set but not used [-Wunused-but-set-variable]
>
> 'cur_rings, max_hw_rings' never used since introduction in commit
> 34e8c406fda5 ("qlcnic: refactor Tx/SDS ring calculation and validation in driver.")
> 'tx_desc_info' never used since commit
> 95b3890ae39f ("qlcnic: Enhance Tx timeout debugging.")
> Also 'queue_type' only can be QLCNIC_RX_QUEUE/QLCNIC_TX_QUEUE,
> so make a trival cleanup on if statement.
>
> Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Applied.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-11-28 19:10 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-28 12:29 [PATCH net-next] qlcnic: remove set but not used variables 'cur_rings, max_hw_rings, tx_desc_info' YueHaibing
2018-11-28 12:37 ` Shaikh, Shahed
2018-11-28 19:10 ` David Miller
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.