* [PATCH] pinctrl: sh-pfc: r8a77990: Fix MOD_SEL0 bit3 when using TX0
@ 2019-01-11 12:13 Geert Uytterhoeven
2019-01-11 12:34 ` Simon Horman
0 siblings, 1 reply; 2+ messages in thread
From: Geert Uytterhoeven @ 2019-01-11 12:13 UTC (permalink / raw)
To: Linus Walleij
Cc: linux-renesas-soc, linux-gpio, Takeshi Kihara, Geert Uytterhoeven
From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of
Aug 24, 2018, the MOD_SEL0 bit3 is set to 0 when TX0_A pin function is
selected, and the MOD_SEL0 bit3 is set to 1 when TX0_B pin function is
selected.
Fixes: 6d4036a1e3b3ac0f ("pinctrl: sh-pfc: Initial R8A77990 PFC support")
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
To be queued in sh-pfc-for-v5.1.
drivers/pinctrl/sh-pfc/pfc-r8a77990.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
index db8e1f1e91551b93..3ce1b24a9d6e95f2 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
@@ -1073,7 +1073,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_GPSR(IP11_11_8, RIF1_SYNC),
PINMUX_IPSR_GPSR(IP11_11_8, TS_SCK1),
- PINMUX_IPSR_GPSR(IP11_15_12, TX0_A),
+ PINMUX_IPSR_MSEL(IP11_15_12, TX0_A, SEL_SCIF0_0),
PINMUX_IPSR_GPSR(IP11_15_12, HTX1_A),
PINMUX_IPSR_MSEL(IP11_15_12, SSI_WS2_A, SEL_SSI2_0),
PINMUX_IPSR_GPSR(IP11_15_12, RIF1_D0),
@@ -1183,7 +1183,7 @@ static const u16 pinmux_data[] = {
PINMUX_IPSR_MSEL(IP13_19_16, SIM0_D_A, SEL_SIMCARD_0),
PINMUX_IPSR_GPSR(IP13_23_20, MLB_DAT),
- PINMUX_IPSR_GPSR(IP13_23_20, TX0_B),
+ PINMUX_IPSR_MSEL(IP13_23_20, TX0_B, SEL_SCIF0_1),
PINMUX_IPSR_MSEL(IP13_23_20, RIF0_SYNC_A, SEL_DRIF0_0),
PINMUX_IPSR_GPSR(IP13_23_20, SIM0_CLK_A),
--
2.17.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] pinctrl: sh-pfc: r8a77990: Fix MOD_SEL0 bit3 when using TX0
2019-01-11 12:13 [PATCH] pinctrl: sh-pfc: r8a77990: Fix MOD_SEL0 bit3 when using TX0 Geert Uytterhoeven
@ 2019-01-11 12:34 ` Simon Horman
0 siblings, 0 replies; 2+ messages in thread
From: Simon Horman @ 2019-01-11 12:34 UTC (permalink / raw)
To: Geert Uytterhoeven
Cc: Linus Walleij, linux-renesas-soc, linux-gpio, Takeshi Kihara
On Fri, Jan 11, 2019 at 01:13:40PM +0100, Geert Uytterhoeven wrote:
> From: Takeshi Kihara <takeshi.kihara.df@renesas.com>
>
> According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of
> Aug 24, 2018, the MOD_SEL0 bit3 is set to 0 when TX0_A pin function is
> selected, and the MOD_SEL0 bit3 is set to 1 when TX0_B pin function is
> selected.
>
> Fixes: 6d4036a1e3b3ac0f ("pinctrl: sh-pfc: Initial R8A77990 PFC support")
> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> To be queued in sh-pfc-for-v5.1.
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
>
> drivers/pinctrl/sh-pfc/pfc-r8a77990.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
> index db8e1f1e91551b93..3ce1b24a9d6e95f2 100644
> --- a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
> +++ b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
> @@ -1073,7 +1073,7 @@ static const u16 pinmux_data[] = {
> PINMUX_IPSR_GPSR(IP11_11_8, RIF1_SYNC),
> PINMUX_IPSR_GPSR(IP11_11_8, TS_SCK1),
>
> - PINMUX_IPSR_GPSR(IP11_15_12, TX0_A),
> + PINMUX_IPSR_MSEL(IP11_15_12, TX0_A, SEL_SCIF0_0),
> PINMUX_IPSR_GPSR(IP11_15_12, HTX1_A),
> PINMUX_IPSR_MSEL(IP11_15_12, SSI_WS2_A, SEL_SSI2_0),
> PINMUX_IPSR_GPSR(IP11_15_12, RIF1_D0),
> @@ -1183,7 +1183,7 @@ static const u16 pinmux_data[] = {
> PINMUX_IPSR_MSEL(IP13_19_16, SIM0_D_A, SEL_SIMCARD_0),
>
> PINMUX_IPSR_GPSR(IP13_23_20, MLB_DAT),
> - PINMUX_IPSR_GPSR(IP13_23_20, TX0_B),
> + PINMUX_IPSR_MSEL(IP13_23_20, TX0_B, SEL_SCIF0_1),
> PINMUX_IPSR_MSEL(IP13_23_20, RIF0_SYNC_A, SEL_DRIF0_0),
> PINMUX_IPSR_GPSR(IP13_23_20, SIM0_CLK_A),
>
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-01-11 12:34 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-11 12:13 [PATCH] pinctrl: sh-pfc: r8a77990: Fix MOD_SEL0 bit3 when using TX0 Geert Uytterhoeven
2019-01-11 12:34 ` Simon Horman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.