* [PATCH v2 1/2] dt-bindings: usb: usb251xb: add documentation for data lane swapping
@ 2019-01-15 11:50 ` Marco Felsch
0 siblings, 0 replies; 10+ messages in thread
From: Marco Felsch @ 2019-01-15 11:50 UTC (permalink / raw)
To: richard.leitner, robh, fancer.lancer; +Cc: devicetree, linux-usb, kernel
Add optional binding to allow USB differential-pair (D+/D-) data lane
swapping. The swapping can be specified for each port separately,
default is no swapping.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
Changes:
v2:
- rename property s/sw-dx-lanes-ports/swap-dx-lanes
Documentation/devicetree/bindings/usb/usb251xb.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt
index 168ff819e827..17915f64b8ee 100644
--- a/Documentation/devicetree/bindings/usb/usb251xb.txt
+++ b/Documentation/devicetree/bindings/usb/usb251xb.txt
@@ -64,6 +64,8 @@ Optional properties :
- power-on-time-ms : Specifies the time it takes from the time the host
initiates the power-on sequence to a port until the port has adequate
power. The value is given in ms in a 0 - 510 range (default is 100ms).
+ - swap-dx-lanes : Specifies the ports which will swap the differential-pair
+ (D+/D-), default is not-swapped.
Examples:
usb2512b@2c {
@@ -81,4 +83,6 @@ Examples:
manufacturer = "Foo";
product = "Foo-Bar";
serial = "1234567890A";
+ /* correct misplaced usb connectors on port 1,2 */
+ swap-dx-lanes = <1 2>;
};
--
2.20.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [v2,1/2] dt-bindings: usb: usb251xb: add documentation for data lane swapping
@ 2019-01-15 11:50 ` Marco Felsch
0 siblings, 0 replies; 10+ messages in thread
From: Marco Felsch @ 2019-01-15 11:50 UTC (permalink / raw)
To: richard.leitner, robh, fancer.lancer; +Cc: devicetree, linux-usb, kernel
Add optional binding to allow USB differential-pair (D+/D-) data lane
swapping. The swapping can be specified for each port separately,
default is no swapping.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
Changes:
v2:
- rename property s/sw-dx-lanes-ports/swap-dx-lanes
Documentation/devicetree/bindings/usb/usb251xb.txt | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt
index 168ff819e827..17915f64b8ee 100644
--- a/Documentation/devicetree/bindings/usb/usb251xb.txt
+++ b/Documentation/devicetree/bindings/usb/usb251xb.txt
@@ -64,6 +64,8 @@ Optional properties :
- power-on-time-ms : Specifies the time it takes from the time the host
initiates the power-on sequence to a port until the port has adequate
power. The value is given in ms in a 0 - 510 range (default is 100ms).
+ - swap-dx-lanes : Specifies the ports which will swap the differential-pair
+ (D+/D-), default is not-swapped.
Examples:
usb2512b@2c {
@@ -81,4 +83,6 @@ Examples:
manufacturer = "Foo";
product = "Foo-Bar";
serial = "1234567890A";
+ /* correct misplaced usb connectors on port 1,2 */
+ swap-dx-lanes = <1 2>;
};
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 2/2] usb: usb251xb: add usb data lane port swap feature
@ 2019-01-15 11:50 ` Marco Felsch
0 siblings, 0 replies; 10+ messages in thread
From: Marco Felsch @ 2019-01-15 11:50 UTC (permalink / raw)
To: richard.leitner, robh, fancer.lancer; +Cc: devicetree, linux-usb, kernel
The HW can swap the USB differential-pair (D+/D-) for each port
separately. So the USB signals can be re-aligned with a misplaced
USB connector on the PCB.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
Changes:
v2:
- rename property s/sw-dx-lanes-ports/swap-dx-lanes
- add commentar for future users
drivers/usb/misc/usb251xb.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index a6efb9a72939..ec649046688d 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -337,10 +337,12 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
struct device *dev = hub->dev;
struct device_node *np = dev->of_node;
int len, err, i;
- u32 property_u32 = 0;
+ u32 port, property_u32 = 0;
const u32 *cproperty_u32;
const char *cproperty_char;
char str[USB251XB_STRING_BUFSIZE / 2];
+ struct property *prop;
+ const __be32 *p;
if (!np) {
dev_err(dev, "failed to get ofdata\n");
@@ -539,6 +541,16 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
(wchar_t *)hub->serial,
USB251XB_STRING_BUFSIZE);
+ /*
+ * The datasheet documents the register as 'Port Swap' but the register
+ * controls the USB DP/DM signal swapping
+ */
+ hub->port_swap = USB251XB_DEF_PORT_SWAP;
+ of_property_for_each_u32(np, "swap-dx-lanes", prop, p, port) {
+ if ((port >= 0) && (port <= data->port_cnt))
+ hub->port_swap |= BIT(port);
+ }
+
/* The following parameters are currently not exposed to devicetree, but
* may be as soon as needed.
*/
@@ -546,7 +558,6 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
hub->boost_up = USB251XB_DEF_BOOST_UP;
hub->boost_57 = USB251XB_DEF_BOOST_57;
hub->boost_14 = USB251XB_DEF_BOOST_14;
- hub->port_swap = USB251XB_DEF_PORT_SWAP;
hub->port_map12 = USB251XB_DEF_PORT_MAP_12;
hub->port_map34 = USB251XB_DEF_PORT_MAP_34;
hub->port_map56 = USB251XB_DEF_PORT_MAP_56;
--
2.20.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [v2,2/2] usb: usb251xb: add usb data lane port swap feature
@ 2019-01-15 11:50 ` Marco Felsch
0 siblings, 0 replies; 10+ messages in thread
From: Marco Felsch @ 2019-01-15 11:50 UTC (permalink / raw)
To: richard.leitner, robh, fancer.lancer; +Cc: devicetree, linux-usb, kernel
The HW can swap the USB differential-pair (D+/D-) for each port
separately. So the USB signals can be re-aligned with a misplaced
USB connector on the PCB.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
---
Changes:
v2:
- rename property s/sw-dx-lanes-ports/swap-dx-lanes
- add commentar for future users
drivers/usb/misc/usb251xb.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index a6efb9a72939..ec649046688d 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -337,10 +337,12 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
struct device *dev = hub->dev;
struct device_node *np = dev->of_node;
int len, err, i;
- u32 property_u32 = 0;
+ u32 port, property_u32 = 0;
const u32 *cproperty_u32;
const char *cproperty_char;
char str[USB251XB_STRING_BUFSIZE / 2];
+ struct property *prop;
+ const __be32 *p;
if (!np) {
dev_err(dev, "failed to get ofdata\n");
@@ -539,6 +541,16 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
(wchar_t *)hub->serial,
USB251XB_STRING_BUFSIZE);
+ /*
+ * The datasheet documents the register as 'Port Swap' but the register
+ * controls the USB DP/DM signal swapping
+ */
+ hub->port_swap = USB251XB_DEF_PORT_SWAP;
+ of_property_for_each_u32(np, "swap-dx-lanes", prop, p, port) {
+ if ((port >= 0) && (port <= data->port_cnt))
+ hub->port_swap |= BIT(port);
+ }
+
/* The following parameters are currently not exposed to devicetree, but
* may be as soon as needed.
*/
@@ -546,7 +558,6 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
hub->boost_up = USB251XB_DEF_BOOST_UP;
hub->boost_57 = USB251XB_DEF_BOOST_57;
hub->boost_14 = USB251XB_DEF_BOOST_14;
- hub->port_swap = USB251XB_DEF_PORT_SWAP;
hub->port_map12 = USB251XB_DEF_PORT_MAP_12;
hub->port_map34 = USB251XB_DEF_PORT_MAP_34;
hub->port_map56 = USB251XB_DEF_PORT_MAP_56;
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v2 2/2] usb: usb251xb: add usb data lane port swap feature
@ 2019-01-15 12:04 ` Marco Felsch
0 siblings, 0 replies; 10+ messages in thread
From: Marco Felsch @ 2019-01-15 12:04 UTC (permalink / raw)
To: richard.leitner, robh, fancer.lancer; +Cc: devicetree, linux-usb, kernel
Hi,
On 19-01-15 12:50, Marco Felsch wrote:
> The HW can swap the USB differential-pair (D+/D-) for each port
> separately. So the USB signals can be re-aligned with a misplaced
> USB connector on the PCB.
>
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> ---
> Changes:
> v2:
> - rename property s/sw-dx-lanes-ports/swap-dx-lanes
> - add commentar for future users
>
> drivers/usb/misc/usb251xb.c | 15 +++++++++++++--
> 1 file changed, 13 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
> index a6efb9a72939..ec649046688d 100644
> --- a/drivers/usb/misc/usb251xb.c
> +++ b/drivers/usb/misc/usb251xb.c
> @@ -337,10 +337,12 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
> struct device *dev = hub->dev;
> struct device_node *np = dev->of_node;
> int len, err, i;
> - u32 property_u32 = 0;
> + u32 port, property_u32 = 0;
> const u32 *cproperty_u32;
> const char *cproperty_char;
> char str[USB251XB_STRING_BUFSIZE / 2];
> + struct property *prop;
> + const __be32 *p;
>
> if (!np) {
> dev_err(dev, "failed to get ofdata\n");
> @@ -539,6 +541,16 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
> (wchar_t *)hub->serial,
> USB251XB_STRING_BUFSIZE);
>
> + /*
> + * The datasheet documents the register as 'Port Swap' but the register
> + * controls the USB DP/DM signal swapping
> + */
Sorry for the noise, unfortunately I forgot to update the patch..
Richard can you fix the commentar inline to:
8<----------------------------------------------------------------------------
+ /*
+ * The datasheet documents the register as 'Port Swap' but in real the
+ * register controls the USB DP/DM signal swapping for each port.
+ */
8<----------------------------------------------------------------------------
> + hub->port_swap = USB251XB_DEF_PORT_SWAP;
> + of_property_for_each_u32(np, "swap-dx-lanes", prop, p, port) {
> + if ((port >= 0) && (port <= data->port_cnt))
> + hub->port_swap |= BIT(port);
> + }
> +
> /* The following parameters are currently not exposed to devicetree, but
> * may be as soon as needed.
> */
> @@ -546,7 +558,6 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
> hub->boost_up = USB251XB_DEF_BOOST_UP;
> hub->boost_57 = USB251XB_DEF_BOOST_57;
> hub->boost_14 = USB251XB_DEF_BOOST_14;
> - hub->port_swap = USB251XB_DEF_PORT_SWAP;
> hub->port_map12 = USB251XB_DEF_PORT_MAP_12;
> hub->port_map34 = USB251XB_DEF_PORT_MAP_34;
> hub->port_map56 = USB251XB_DEF_PORT_MAP_56;
> --
> 2.20.1
>
>
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 10+ messages in thread
* [v2,2/2] usb: usb251xb: add usb data lane port swap feature
@ 2019-01-15 12:04 ` Marco Felsch
0 siblings, 0 replies; 10+ messages in thread
From: Marco Felsch @ 2019-01-15 12:04 UTC (permalink / raw)
To: richard.leitner, robh, fancer.lancer; +Cc: devicetree, linux-usb, kernel
Hi,
On 19-01-15 12:50, Marco Felsch wrote:
> The HW can swap the USB differential-pair (D+/D-) for each port
> separately. So the USB signals can be re-aligned with a misplaced
> USB connector on the PCB.
>
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> ---
> Changes:
> v2:
> - rename property s/sw-dx-lanes-ports/swap-dx-lanes
> - add commentar for future users
>
> drivers/usb/misc/usb251xb.c | 15 +++++++++++++--
> 1 file changed, 13 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
> index a6efb9a72939..ec649046688d 100644
> --- a/drivers/usb/misc/usb251xb.c
> +++ b/drivers/usb/misc/usb251xb.c
> @@ -337,10 +337,12 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
> struct device *dev = hub->dev;
> struct device_node *np = dev->of_node;
> int len, err, i;
> - u32 property_u32 = 0;
> + u32 port, property_u32 = 0;
> const u32 *cproperty_u32;
> const char *cproperty_char;
> char str[USB251XB_STRING_BUFSIZE / 2];
> + struct property *prop;
> + const __be32 *p;
>
> if (!np) {
> dev_err(dev, "failed to get ofdata\n");
> @@ -539,6 +541,16 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
> (wchar_t *)hub->serial,
> USB251XB_STRING_BUFSIZE);
>
> + /*
> + * The datasheet documents the register as 'Port Swap' but the register
> + * controls the USB DP/DM signal swapping
> + */
Sorry for the noise, unfortunately I forgot to update the patch..
Richard can you fix the commentar inline to:
8<----------------------------------------------------------------------------
+ /*
+ * The datasheet documents the register as 'Port Swap' but in real the
+ * register controls the USB DP/DM signal swapping for each port.
+ */
8<----------------------------------------------------------------------------
> + hub->port_swap = USB251XB_DEF_PORT_SWAP;
> + of_property_for_each_u32(np, "swap-dx-lanes", prop, p, port) {
> + if ((port >= 0) && (port <= data->port_cnt))
> + hub->port_swap |= BIT(port);
> + }
> +
> /* The following parameters are currently not exposed to devicetree, but
> * may be as soon as needed.
> */
> @@ -546,7 +558,6 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
> hub->boost_up = USB251XB_DEF_BOOST_UP;
> hub->boost_57 = USB251XB_DEF_BOOST_57;
> hub->boost_14 = USB251XB_DEF_BOOST_14;
> - hub->port_swap = USB251XB_DEF_PORT_SWAP;
> hub->port_map12 = USB251XB_DEF_PORT_MAP_12;
> hub->port_map34 = USB251XB_DEF_PORT_MAP_34;
> hub->port_map56 = USB251XB_DEF_PORT_MAP_56;
> --
> 2.20.1
>
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 1/2] dt-bindings: usb: usb251xb: add documentation for data lane swapping
@ 2019-01-16 13:45 ` Richard Leitner
0 siblings, 0 replies; 10+ messages in thread
From: Richard Leitner @ 2019-01-16 13:45 UTC (permalink / raw)
To: Marco Felsch, robh, fancer.lancer; +Cc: devicetree, linux-usb, kernel
On 15/01/2019 12:50, Marco Felsch wrote:
> Add optional binding to allow USB differential-pair (D+/D-) data lane
> swapping. The swapping can be specified for each port separately,
> default is no swapping.
>
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> ---
> Changes:
> v2:
> - rename property s/sw-dx-lanes-ports/swap-dx-lanes
>
> Documentation/devicetree/bindings/usb/usb251xb.txt | 4 ++++
> 1 file changed, 4 insertions(+)
>
looks good to me. Feel free to add
Reviewed-by: Richard Leitner <richard.leitner@skidata.com>
^ permalink raw reply [flat|nested] 10+ messages in thread
* [v2,1/2] dt-bindings: usb: usb251xb: add documentation for data lane swapping
@ 2019-01-16 13:45 ` Richard Leitner
0 siblings, 0 replies; 10+ messages in thread
From: Richard Leitner @ 2019-01-16 13:45 UTC (permalink / raw)
To: Marco Felsch, robh, fancer.lancer; +Cc: devicetree, linux-usb, kernel
On 15/01/2019 12:50, Marco Felsch wrote:
> Add optional binding to allow USB differential-pair (D+/D-) data lane
> swapping. The swapping can be specified for each port separately,
> default is no swapping.
>
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> ---
> Changes:
> v2:
> - rename property s/sw-dx-lanes-ports/swap-dx-lanes
>
> Documentation/devicetree/bindings/usb/usb251xb.txt | 4 ++++
> 1 file changed, 4 insertions(+)
>
looks good to me. Feel free to add
Reviewed-by: Richard Leitner <richard.leitner@skidata.com>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 2/2] usb: usb251xb: add usb data lane port swap feature
@ 2019-01-16 13:56 ` Richard Leitner
0 siblings, 0 replies; 10+ messages in thread
From: Richard Leitner @ 2019-01-16 13:56 UTC (permalink / raw)
To: Marco Felsch, robh, fancer.lancer; +Cc: devicetree, linux-usb, kernel
Hi,
On 15/01/2019 13:04, Marco Felsch wrote:
> Hi,
>
> On 19-01-15 12:50, Marco Felsch wrote:
>> The HW can swap the USB differential-pair (D+/D-) for each port
>> separately. So the USB signals can be re-aligned with a misplaced
>> USB connector on the PCB.
>>
>> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
>> ---
>> Changes:
>> v2:
>> - rename property s/sw-dx-lanes-ports/swap-dx-lanes
>> - add commentar for future users
>>
>> drivers/usb/misc/usb251xb.c | 15 +++++++++++++--
>> 1 file changed, 13 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
>> index a6efb9a72939..ec649046688d 100644
>> --- a/drivers/usb/misc/usb251xb.c
>> +++ b/drivers/usb/misc/usb251xb.c
>> @@ -337,10 +337,12 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
>> struct device *dev = hub->dev;
>> struct device_node *np = dev->of_node;
>> int len, err, i;
>> - u32 property_u32 = 0;
>> + u32 port, property_u32 = 0;
>> const u32 *cproperty_u32;
>> const char *cproperty_char;
>> char str[USB251XB_STRING_BUFSIZE / 2];
>> + struct property *prop;
>> + const __be32 *p;
>>
>> if (!np) {
>> dev_err(dev, "failed to get ofdata\n");
>> @@ -539,6 +541,16 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
>> (wchar_t *)hub->serial,
>> USB251XB_STRING_BUFSIZE);
>>
>> + /*
>> + * The datasheet documents the register as 'Port Swap' but the register
>> + * controls the USB DP/DM signal swapping
>> + */
>
> Sorry for the noise, unfortunately I forgot to update the patch..
> Richard can you fix the commentar inline to:
>
> 8<----------------------------------------------------------------------------
> + /*
> + * The datasheet documents the register as 'Port Swap' but in real the
> + * register controls the USB DP/DM signal swapping for each port.
> + */
> 8<----------------------------------------------------------------------------
With this applied the patch looks good to me, therefore feel free to add:
Reviewed-by: Richard Leitner <richard.leitner@skidata.com>
Furthermore please send a v3 with this fixed and put Greg-KH
(gregkh@linuxfoundation.org) on CC as he will merge it into his tree.
regards;Richard.L
^ permalink raw reply [flat|nested] 10+ messages in thread
* [v2,2/2] usb: usb251xb: add usb data lane port swap feature
@ 2019-01-16 13:56 ` Richard Leitner
0 siblings, 0 replies; 10+ messages in thread
From: Richard Leitner @ 2019-01-16 13:56 UTC (permalink / raw)
To: Marco Felsch, robh, fancer.lancer; +Cc: devicetree, linux-usb, kernel
Hi,
On 15/01/2019 13:04, Marco Felsch wrote:
> Hi,
>
> On 19-01-15 12:50, Marco Felsch wrote:
>> The HW can swap the USB differential-pair (D+/D-) for each port
>> separately. So the USB signals can be re-aligned with a misplaced
>> USB connector on the PCB.
>>
>> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
>> ---
>> Changes:
>> v2:
>> - rename property s/sw-dx-lanes-ports/swap-dx-lanes
>> - add commentar for future users
>>
>> drivers/usb/misc/usb251xb.c | 15 +++++++++++++--
>> 1 file changed, 13 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
>> index a6efb9a72939..ec649046688d 100644
>> --- a/drivers/usb/misc/usb251xb.c
>> +++ b/drivers/usb/misc/usb251xb.c
>> @@ -337,10 +337,12 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
>> struct device *dev = hub->dev;
>> struct device_node *np = dev->of_node;
>> int len, err, i;
>> - u32 property_u32 = 0;
>> + u32 port, property_u32 = 0;
>> const u32 *cproperty_u32;
>> const char *cproperty_char;
>> char str[USB251XB_STRING_BUFSIZE / 2];
>> + struct property *prop;
>> + const __be32 *p;
>>
>> if (!np) {
>> dev_err(dev, "failed to get ofdata\n");
>> @@ -539,6 +541,16 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
>> (wchar_t *)hub->serial,
>> USB251XB_STRING_BUFSIZE);
>>
>> + /*
>> + * The datasheet documents the register as 'Port Swap' but the register
>> + * controls the USB DP/DM signal swapping
>> + */
>
> Sorry for the noise, unfortunately I forgot to update the patch..
> Richard can you fix the commentar inline to:
>
> 8<----------------------------------------------------------------------------
> + /*
> + * The datasheet documents the register as 'Port Swap' but in real the
> + * register controls the USB DP/DM signal swapping for each port.
> + */
> 8<----------------------------------------------------------------------------
With this applied the patch looks good to me, therefore feel free to add:
Reviewed-by: Richard Leitner <richard.leitner@skidata.com>
Furthermore please send a v3 with this fixed and put Greg-KH
(gregkh@linuxfoundation.org) on CC as he will merge it into his tree.
regards;Richard.L
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2019-01-16 13:56 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-15 11:50 [PATCH v2 1/2] dt-bindings: usb: usb251xb: add documentation for data lane swapping Marco Felsch
2019-01-15 11:50 ` [v2,1/2] " Marco Felsch
2019-01-15 11:50 ` [PATCH v2 2/2] usb: usb251xb: add usb data lane port swap feature Marco Felsch
2019-01-15 11:50 ` [v2,2/2] " Marco Felsch
2019-01-15 12:04 ` [PATCH v2 2/2] " Marco Felsch
2019-01-15 12:04 ` [v2,2/2] " Marco Felsch
2019-01-16 13:56 ` [PATCH v2 2/2] " Richard Leitner
2019-01-16 13:56 ` [v2,2/2] " Richard Leitner
2019-01-16 13:45 ` [PATCH v2 1/2] dt-bindings: usb: usb251xb: add documentation for data lane swapping Richard Leitner
2019-01-16 13:45 ` [v2,1/2] " Richard Leitner
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.