All of lore.kernel.org
 help / color / mirror / Atom feed
* USB:Serial:pl2303:Add new PID to support PL2303TB(TYPE_HX)
@ 2019-01-16 11:22 Johan Hovold
  0 siblings, 0 replies; 4+ messages in thread
From: Johan Hovold @ 2019-01-16 11:22 UTC (permalink / raw)
  To: Charles Yeh; +Cc: gregkh, johan, linux-usb, charles-yeh

Please add a space after each colon in the commit summary (subject) and
no need to capitalise "serial".

On Tue, Jan 15, 2019 at 11:13:56PM +0800, Charles Yeh wrote:
> Add new PID to support PL2303TB (TYPE_HX)

Is this one independent of the second "pull-up" patch?

> Signed-off-by: Charles Yeh <charlesyeh522@gmail.com>

Thanks,
Johan

^ permalink raw reply	[flat|nested] 4+ messages in thread

* USB:Serial:pl2303:Add new PID to support PL2303TB(TYPE_HX)
@ 2019-01-17 16:28 Johan Hovold
  0 siblings, 0 replies; 4+ messages in thread
From: Johan Hovold @ 2019-01-17 16:28 UTC (permalink / raw)
  To: Yeh.Charles [葉榮鑫]
  Cc: Johan Hovold, Charles Yeh, gregkh, linux-usb

On Thu, Jan 17, 2019 at 02:18:45AM +0000, Yeh.Charles [葉榮鑫] wrote:
> Hi Johan,
> >   Please add a space after each colon in the commit summary (subject) and
> > no need to capitalise "serial".
> 
> Charles_Ans: OK...

I'll fix this one up, but please keep it in mind for future submissions.

> > Is this one independent of the second "pull-up" patch?
> 
> Charles_Ans: Yes, it is independent of the second "pull-up" patch.

Thanks for confirming, I've now applied this one.

> Confidentiality Notice: This e-mail message together with any attachments thereto (if any) is confidential, protected under an enforceable non-disclosure agreement, intended only for the use of the named recipient(s) above and may contain information that is privileged, belonging to professional work products or exempt from disclosure under applicable laws. Any unauthorized review, use, copying, disclosure, or distribution of any information contained in or attached to this transmission is strictly prohibited and may be against the laws. If you have received this message in error, or are not the intended recipient(s), please immediately notify the sender by e-mail and delete this e-mail message, all copies, and any attached documentation from your computer. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability f
 or any damage caused by any errors or omissions in the contents of this email.

As we already discussed, you must remove this notice from the mails you
send to the list.

Thanks,
Johan

^ permalink raw reply	[flat|nested] 4+ messages in thread

* USB:Serial:pl2303:Add new PID to support PL2303TB(TYPE_HX)
@ 2019-01-17  2:18 Yeh.Charles [葉榮鑫]
  0 siblings, 0 replies; 4+ messages in thread
From: Yeh.Charles [葉榮鑫] @ 2019-01-17  2:18 UTC (permalink / raw)
  To: Johan Hovold, Charles Yeh; +Cc: gregkh, linux-usb

Hi Johan,
  Please add a space after each colon in the commit summary (subject) and
no need to capitalise "serial".

Charles_Ans: OK...


Is this one independent of the second "pull-up" patch?

Charles_Ans: Yes, it is independent of the second "pull-up" patch.

Charles Yeh(葉榮鑫)
TeL: +886-2-26546363 ext.522
Prolific Technology Inc. (旺玖科技股份有限公司)

-----Original Message-----
From: Johan Hovold [mailto:johan@kernel.org]
Sent: Wednesday, January 16, 2019 7:22 PM
To: Charles Yeh
Cc: gregkh@linuxfoundation.org; johan@kernel.org; linux-usb@vger.kernel.org; Yeh.Charles [葉榮鑫]
Subject: Re: [PATCH] USB:Serial:pl2303:Add new PID to support PL2303TB(TYPE_HX)

Please add a space after each colon in the commit summary (subject) and
no need to capitalise "serial".

On Tue, Jan 15, 2019 at 11:13:56PM +0800, Charles Yeh wrote:
> Add new PID to support PL2303TB (TYPE_HX)

Is this one independent of the second "pull-up" patch?

> Signed-off-by: Charles Yeh <charlesyeh522@gmail.com>

Thanks,
Johan
保密警語: 本電子郵件內容及其附加檔案均視為機密資料,受保密合約保護或依法不得洩漏。其內容僅供指定收件人按限定範圍或特殊目的合法使用,未經授權者收到此信息均無權閱讀、使用、複製、洩漏或散佈。若您並非本郵件之指定收件人,請即刻回覆郵件並永久刪除此郵件及其附件和銷毀所有複印文件。電子郵件的傳輸可能遭攔截、損毀、遺失、破壞、遲到或不完整、或包含病毒,無法保證其安全或無誤。寄件人不承擔因本電子郵件的錯誤或遺漏所產生的任何損害賠償責任。 Confidentiality Notice: This e-mail message together with any attachments thereto (if any) is confidential, protected under an enforceable non-disclosure agreement, intended only for the use of the named recipient(s) above and may contain information that is privileged, belonging to professional work products or exempt from disclosure under applicable laws. Any unauthorized review, use, copying, disclosure, or distribution of any information contained in or attached to this transmission is strictly prohibited and may be against the laws. If you have received this message in error, or are not the intended recipient(s), please immediately notify the sender by e-mail and delete this e-mail message, all copies, and any attached documentation from your computer. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any damage caused by any errors or omissions in the contents of this email.

^ permalink raw reply	[flat|nested] 4+ messages in thread

* USB:Serial:pl2303:Add new PID to support PL2303TB(TYPE_HX)
@ 2019-01-15 15:13 Charles Yeh
  0 siblings, 0 replies; 4+ messages in thread
From: Charles Yeh @ 2019-01-15 15:13 UTC (permalink / raw)
  To: gregkh, johan, linux-usb; +Cc: charles-yeh, Charles Yeh

Add new PID to support PL2303TB (TYPE_HX)

Signed-off-by: Charles Yeh <charlesyeh522@gmail.com>
---
 drivers/usb/serial/pl2303.c | 1 +
 drivers/usb/serial/pl2303.h | 3 +++
 2 files changed, 4 insertions(+)

diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 98e7a5df0f6d..bb3f9aa4a909 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -46,6 +46,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ZTEK) },
+	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_TB) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
 	{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
 	{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID),
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 4e2554d55362..d4e6cca10f1b 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -20,6 +20,9 @@
 #define PL2303_PRODUCT_ID_MOTOROLA	0x0307
 #define PL2303_PRODUCT_ID_ZTEK		0xe1f1
 
+/* PL2303TB , TYPE_HX */
+#define PL2303_PRODUCT_ID_TB	0x2304
+
 #define ATEN_VENDOR_ID		0x0557
 #define ATEN_VENDOR_ID2		0x0547
 #define ATEN_PRODUCT_ID		0x2008

^ permalink raw reply related	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2019-01-17 16:28 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-16 11:22 USB:Serial:pl2303:Add new PID to support PL2303TB(TYPE_HX) Johan Hovold
  -- strict thread matches above, loose matches on Subject: below --
2019-01-17 16:28 Johan Hovold
2019-01-17  2:18 Yeh.Charles [葉榮鑫]
2019-01-15 15:13 Charles Yeh

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.