* [PATCH] ath10k: Add support for extended HTT aggr msg support
@ 2019-01-16 11:29 ` Govind Singh
0 siblings, 0 replies; 4+ messages in thread
From: Govind Singh @ 2019-01-16 11:29 UTC (permalink / raw)
To: ath10k; +Cc: linux-wireless, Govind Singh
HTT aggr message parameter in HL2.0 fw are different in comparison
to legacy fw version. Fill correct HTT aggr msg parameter for
targets using HL2.0 firmware.
Signed-off-by: Govind Singh <govinds@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/htt.c | 2 +-
drivers/net/wireless/ath/ath10k/htt.h | 11 ++++++
drivers/net/wireless/ath/ath10k/htt_tx.c | 49 ++++++++++++++++++++++++
3 files changed, 61 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/htt.c b/drivers/net/wireless/ath/ath10k/htt.c
index 21a67f82f037..55c716499830 100644
--- a/drivers/net/wireless/ath/ath10k/htt.c
+++ b/drivers/net/wireless/ath/ath10k/htt.c
@@ -268,7 +268,7 @@ int ath10k_htt_setup(struct ath10k_htt *htt)
return status;
}
- status = ath10k_htt_h2t_aggr_cfg_msg(htt,
+ status = htt->tx_ops->htt_h2t_aggr_cfg_msg(htt,
htt->max_num_ampdu,
htt->max_num_amsdu);
if (status) {
diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h
index a76f7c9e2199..f5fa86f6efad 100644
--- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h
@@ -357,6 +357,13 @@ struct htt_aggr_conf {
u8 max_num_amsdu_subframes;
} __packed;
+struct htt_aggr_conf_v2 {
+ u8 max_num_ampdu_subframes;
+ /* amsdu_subframes is limited by 0x1F mask */
+ u8 max_num_amsdu_subframes;
+ u8 reserved;
+} __packed;
+
#define HTT_MGMT_FRM_HDR_DOWNLOAD_LEN 32
struct htt_mgmt_tx_desc_qca99x0 {
__le32 rate;
@@ -1650,6 +1657,7 @@ struct htt_cmd {
struct htt_stats_req stats_req;
struct htt_oob_sync_req oob_sync_req;
struct htt_aggr_conf aggr_conf;
+ struct htt_aggr_conf_v2 aggr_conf_v2;
struct htt_frag_desc_bank_cfg32 frag_desc_bank_cfg32;
struct htt_frag_desc_bank_cfg64 frag_desc_bank_cfg64;
struct htt_tx_fetch_resp tx_fetch_resp;
@@ -1890,6 +1898,9 @@ struct ath10k_htt_tx_ops {
struct sk_buff *msdu);
int (*htt_alloc_txbuff)(struct ath10k_htt *htt);
void (*htt_free_txbuff)(struct ath10k_htt *htt);
+ int (*htt_h2t_aggr_cfg_msg)(struct ath10k_htt *htt,
+ u8 max_subfrms_ampdu,
+ u8 max_subfrms_amsdu);
};
static inline int ath10k_htt_send_rx_ring_cfg(struct ath10k_htt *htt)
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index ad05ab714c9b..336170a4fea6 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -1035,6 +1035,53 @@ int ath10k_htt_h2t_aggr_cfg_msg(struct ath10k_htt *htt,
return 0;
}
+static int ath10k_htt_h2t_aggr_cfg_msg_v2(struct ath10k_htt *htt,
+ u8 max_subfrms_ampdu,
+ u8 max_subfrms_amsdu)
+{
+ struct ath10k *ar = htt->ar;
+ struct htt_aggr_conf_v2 *aggr_conf;
+ struct sk_buff *skb;
+ struct htt_cmd *cmd;
+ int len;
+ int ret;
+
+ /* Firmware defaults are: amsdu = 3 and ampdu = 64 */
+
+ if (max_subfrms_ampdu == 0 || max_subfrms_ampdu > 64)
+ return -EINVAL;
+
+ if (max_subfrms_amsdu == 0 || max_subfrms_amsdu > 31)
+ return -EINVAL;
+
+ len = sizeof(cmd->hdr);
+ len += sizeof(cmd->aggr_conf_v2);
+
+ skb = ath10k_htc_alloc_skb(ar, len);
+ if (!skb)
+ return -ENOMEM;
+
+ skb_put(skb, len);
+ cmd = (struct htt_cmd *)skb->data;
+ cmd->hdr.msg_type = HTT_H2T_MSG_TYPE_AGGR_CFG;
+
+ aggr_conf = &cmd->aggr_conf_v2;
+ aggr_conf->max_num_ampdu_subframes = max_subfrms_ampdu;
+ aggr_conf->max_num_amsdu_subframes = max_subfrms_amsdu;
+
+ ath10k_dbg(ar, ATH10K_DBG_HTT, "htt h2t aggr cfg msg amsdu %d ampdu %d",
+ aggr_conf->max_num_amsdu_subframes,
+ aggr_conf->max_num_ampdu_subframes);
+
+ ret = ath10k_htc_send(&htt->ar->htc, htt->eid, skb);
+ if (ret) {
+ dev_kfree_skb_any(skb);
+ return ret;
+ }
+
+ return 0;
+}
+
int ath10k_htt_tx_fetch_resp(struct ath10k *ar,
__le32 token,
__le16 fetch_seq_num,
@@ -1692,6 +1739,7 @@ static const struct ath10k_htt_tx_ops htt_tx_ops_32 = {
.htt_tx = ath10k_htt_tx_32,
.htt_alloc_txbuff = ath10k_htt_tx_alloc_cont_txbuf_32,
.htt_free_txbuff = ath10k_htt_tx_free_cont_txbuf_32,
+ .htt_h2t_aggr_cfg_msg = ath10k_htt_h2t_aggr_cfg_msg,
};
static const struct ath10k_htt_tx_ops htt_tx_ops_64 = {
@@ -1702,6 +1750,7 @@ static const struct ath10k_htt_tx_ops htt_tx_ops_64 = {
.htt_tx = ath10k_htt_tx_64,
.htt_alloc_txbuff = ath10k_htt_tx_alloc_cont_txbuf_64,
.htt_free_txbuff = ath10k_htt_tx_free_cont_txbuf_64,
+ .htt_h2t_aggr_cfg_msg = ath10k_htt_h2t_aggr_cfg_msg_v2,
};
static const struct ath10k_htt_tx_ops htt_tx_ops_hl = {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] ath10k: Add support for extended HTT aggr msg support
@ 2019-01-16 11:29 ` Govind Singh
0 siblings, 0 replies; 4+ messages in thread
From: Govind Singh @ 2019-01-16 11:29 UTC (permalink / raw)
To: ath10k; +Cc: Govind Singh, linux-wireless
HTT aggr message parameter in HL2.0 fw are different in comparison
to legacy fw version. Fill correct HTT aggr msg parameter for
targets using HL2.0 firmware.
Signed-off-by: Govind Singh <govinds@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/htt.c | 2 +-
drivers/net/wireless/ath/ath10k/htt.h | 11 ++++++
drivers/net/wireless/ath/ath10k/htt_tx.c | 49 ++++++++++++++++++++++++
3 files changed, 61 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/htt.c b/drivers/net/wireless/ath/ath10k/htt.c
index 21a67f82f037..55c716499830 100644
--- a/drivers/net/wireless/ath/ath10k/htt.c
+++ b/drivers/net/wireless/ath/ath10k/htt.c
@@ -268,7 +268,7 @@ int ath10k_htt_setup(struct ath10k_htt *htt)
return status;
}
- status = ath10k_htt_h2t_aggr_cfg_msg(htt,
+ status = htt->tx_ops->htt_h2t_aggr_cfg_msg(htt,
htt->max_num_ampdu,
htt->max_num_amsdu);
if (status) {
diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h
index a76f7c9e2199..f5fa86f6efad 100644
--- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h
@@ -357,6 +357,13 @@ struct htt_aggr_conf {
u8 max_num_amsdu_subframes;
} __packed;
+struct htt_aggr_conf_v2 {
+ u8 max_num_ampdu_subframes;
+ /* amsdu_subframes is limited by 0x1F mask */
+ u8 max_num_amsdu_subframes;
+ u8 reserved;
+} __packed;
+
#define HTT_MGMT_FRM_HDR_DOWNLOAD_LEN 32
struct htt_mgmt_tx_desc_qca99x0 {
__le32 rate;
@@ -1650,6 +1657,7 @@ struct htt_cmd {
struct htt_stats_req stats_req;
struct htt_oob_sync_req oob_sync_req;
struct htt_aggr_conf aggr_conf;
+ struct htt_aggr_conf_v2 aggr_conf_v2;
struct htt_frag_desc_bank_cfg32 frag_desc_bank_cfg32;
struct htt_frag_desc_bank_cfg64 frag_desc_bank_cfg64;
struct htt_tx_fetch_resp tx_fetch_resp;
@@ -1890,6 +1898,9 @@ struct ath10k_htt_tx_ops {
struct sk_buff *msdu);
int (*htt_alloc_txbuff)(struct ath10k_htt *htt);
void (*htt_free_txbuff)(struct ath10k_htt *htt);
+ int (*htt_h2t_aggr_cfg_msg)(struct ath10k_htt *htt,
+ u8 max_subfrms_ampdu,
+ u8 max_subfrms_amsdu);
};
static inline int ath10k_htt_send_rx_ring_cfg(struct ath10k_htt *htt)
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index ad05ab714c9b..336170a4fea6 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -1035,6 +1035,53 @@ int ath10k_htt_h2t_aggr_cfg_msg(struct ath10k_htt *htt,
return 0;
}
+static int ath10k_htt_h2t_aggr_cfg_msg_v2(struct ath10k_htt *htt,
+ u8 max_subfrms_ampdu,
+ u8 max_subfrms_amsdu)
+{
+ struct ath10k *ar = htt->ar;
+ struct htt_aggr_conf_v2 *aggr_conf;
+ struct sk_buff *skb;
+ struct htt_cmd *cmd;
+ int len;
+ int ret;
+
+ /* Firmware defaults are: amsdu = 3 and ampdu = 64 */
+
+ if (max_subfrms_ampdu == 0 || max_subfrms_ampdu > 64)
+ return -EINVAL;
+
+ if (max_subfrms_amsdu == 0 || max_subfrms_amsdu > 31)
+ return -EINVAL;
+
+ len = sizeof(cmd->hdr);
+ len += sizeof(cmd->aggr_conf_v2);
+
+ skb = ath10k_htc_alloc_skb(ar, len);
+ if (!skb)
+ return -ENOMEM;
+
+ skb_put(skb, len);
+ cmd = (struct htt_cmd *)skb->data;
+ cmd->hdr.msg_type = HTT_H2T_MSG_TYPE_AGGR_CFG;
+
+ aggr_conf = &cmd->aggr_conf_v2;
+ aggr_conf->max_num_ampdu_subframes = max_subfrms_ampdu;
+ aggr_conf->max_num_amsdu_subframes = max_subfrms_amsdu;
+
+ ath10k_dbg(ar, ATH10K_DBG_HTT, "htt h2t aggr cfg msg amsdu %d ampdu %d",
+ aggr_conf->max_num_amsdu_subframes,
+ aggr_conf->max_num_ampdu_subframes);
+
+ ret = ath10k_htc_send(&htt->ar->htc, htt->eid, skb);
+ if (ret) {
+ dev_kfree_skb_any(skb);
+ return ret;
+ }
+
+ return 0;
+}
+
int ath10k_htt_tx_fetch_resp(struct ath10k *ar,
__le32 token,
__le16 fetch_seq_num,
@@ -1692,6 +1739,7 @@ static const struct ath10k_htt_tx_ops htt_tx_ops_32 = {
.htt_tx = ath10k_htt_tx_32,
.htt_alloc_txbuff = ath10k_htt_tx_alloc_cont_txbuf_32,
.htt_free_txbuff = ath10k_htt_tx_free_cont_txbuf_32,
+ .htt_h2t_aggr_cfg_msg = ath10k_htt_h2t_aggr_cfg_msg,
};
static const struct ath10k_htt_tx_ops htt_tx_ops_64 = {
@@ -1702,6 +1750,7 @@ static const struct ath10k_htt_tx_ops htt_tx_ops_64 = {
.htt_tx = ath10k_htt_tx_64,
.htt_alloc_txbuff = ath10k_htt_tx_alloc_cont_txbuf_64,
.htt_free_txbuff = ath10k_htt_tx_free_cont_txbuf_64,
+ .htt_h2t_aggr_cfg_msg = ath10k_htt_h2t_aggr_cfg_msg_v2,
};
static const struct ath10k_htt_tx_ops htt_tx_ops_hl = {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] ath10k: Add support for extended HTT aggr msg support
2019-01-16 11:29 ` Govind Singh
(?)
(?)
@ 2019-02-04 15:52 ` Kalle Valo
-1 siblings, 0 replies; 4+ messages in thread
From: Kalle Valo @ 2019-02-04 15:52 UTC (permalink / raw)
To: Govind Singh; +Cc: ath10k, linux-wireless, Govind Singh
Govind Singh <govinds@codeaurora.org> wrote:
> HTT aggr message parameter in HL2.0 fw are different in comparison
> to legacy fw version. Fill correct HTT aggr msg parameter for
> targets using HL2.0 firmware.
>
> Signed-off-by: Govind Singh <govinds@codeaurora.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Patch applied to ath-next branch of ath.git, thanks.
5cbb11747750 ath10k: Add support for extended HTT aggr msg support
--
https://patchwork.kernel.org/patch/10765773/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] ath10k: Add support for extended HTT aggr msg support
2019-01-16 11:29 ` Govind Singh
(?)
@ 2019-02-04 15:52 ` Kalle Valo
-1 siblings, 0 replies; 4+ messages in thread
From: Kalle Valo @ 2019-02-04 15:52 UTC (permalink / raw)
To: Govind Singh; +Cc: linux-wireless, ath10k
Govind Singh <govinds@codeaurora.org> wrote:
> HTT aggr message parameter in HL2.0 fw are different in comparison
> to legacy fw version. Fill correct HTT aggr msg parameter for
> targets using HL2.0 firmware.
>
> Signed-off-by: Govind Singh <govinds@codeaurora.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Patch applied to ath-next branch of ath.git, thanks.
5cbb11747750 ath10k: Add support for extended HTT aggr msg support
--
https://patchwork.kernel.org/patch/10765773/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-02-04 15:52 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-01-16 11:29 [PATCH] ath10k: Add support for extended HTT aggr msg support Govind Singh
2019-01-16 11:29 ` Govind Singh
2019-02-04 15:52 ` Kalle Valo
2019-02-04 15:52 ` Kalle Valo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.