All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sven Eckelmann <sven@narfation.org>
To: b.a.t.m.a.n@lists.open-mesh.org
Cc: Jiri Pirko <jiri@mellanox.com>,
	netdev@vger.kernel.org, Sven Eckelmann <sven@narfation.org>,
	Marek Lindner <mareklindner@neomailbox.ch>
Subject: [RFC v4 13/19] batman-adv: Add log_level mesh genl configuration
Date: Sat, 19 Jan 2019 16:56:20 +0100	[thread overview]
Message-ID: <20190119155626.6414-14-sven@narfation.org> (raw)
In-Reply-To: <20190119155626.6414-1-sven@narfation.org>

In contrast to other modules, batman-adv allows to set the debug message
verbosity per mesh/soft-interface and not per module (via modparam).

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the u32 (bitmask) BATADV_ATTR_LOG_LEVEL
attribute.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Marek Lindner <mareklindner@neomailbox.ch>
---
 include/uapi/linux/batman_adv.h |  6 ++++++
 net/batman-adv/netlink.c        | 17 +++++++++++++++++
 2 files changed, 23 insertions(+)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index b37cb923..6d36e4b4 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -449,6 +449,12 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_HOP_PENALTY,
 
+	/**
+	 * @BATADV_ATTR_LOG_LEVEL: bitmask with to define which debug messages
+	 *  should be send to the debug log/trace ring buffer
+	 */
+	BATADV_ATTR_LOG_LEVEL,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 8602129f..d39f8f83 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -53,6 +53,7 @@
 #include "gateway_client.h"
 #include "gateway_common.h"
 #include "hard-interface.h"
+#include "log.h"
 #include "multicast.h"
 #include "originator.h"
 #include "soft-interface.h"
@@ -153,6 +154,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_GW_MODE]			= { .type = NLA_U8 },
 	[BATADV_ATTR_GW_SEL_CLASS]		= { .type = NLA_U32 },
 	[BATADV_ATTR_HOP_PENALTY]		= { .type = NLA_U8 },
+	[BATADV_ATTR_LOG_LEVEL]			= { .type = NLA_U32 },
 };
 
 /**
@@ -335,6 +337,12 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
 		       atomic_read(&bat_priv->hop_penalty)))
 		goto nla_put_failure;
 
+#ifdef CONFIG_BATMAN_ADV_DEBUG
+	if (nla_put_u32(msg, BATADV_ATTR_LOG_LEVEL,
+			atomic_read(&bat_priv->log_level)))
+		goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_DEBUG */
+
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 
@@ -547,6 +555,15 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 		atomic_set(&bat_priv->hop_penalty, nla_get_u8(attr));
 	}
 
+#ifdef CONFIG_BATMAN_ADV_DEBUG
+	if (info->attrs[BATADV_ATTR_LOG_LEVEL]) {
+		attr = info->attrs[BATADV_ATTR_LOG_LEVEL];
+
+		atomic_set(&bat_priv->log_level,
+			   nla_get_u32(attr) & BATADV_DBG_ALL);
+	}
+#endif /* CONFIG_BATMAN_ADV_DEBUG */
+
 	batadv_netlink_notify_mesh(bat_priv);
 
 	return 0;
-- 
2.20.1


WARNING: multiple messages have this Message-ID (diff)
From: Sven Eckelmann <sven@narfation.org>
To: b.a.t.m.a.n@lists.open-mesh.org
Cc: Jiri Pirko <jiri@mellanox.com>,
	netdev@vger.kernel.org, Sven Eckelmann <sven@narfation.org>,
	Marek Lindner <mareklindner@neomailbox.ch>
Subject: [B.A.T.M.A.N.] [RFC v4 13/19] batman-adv: Add log_level mesh genl configuration
Date: Sat, 19 Jan 2019 16:56:20 +0100	[thread overview]
Message-ID: <20190119155626.6414-14-sven@narfation.org> (raw)
In-Reply-To: <20190119155626.6414-1-sven@narfation.org>

In contrast to other modules, batman-adv allows to set the debug message
verbosity per mesh/soft-interface and not per module (via modparam).

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the
configuration of this feature using the u32 (bitmask) BATADV_ATTR_LOG_LEVEL
attribute.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
---
Cc: Marek Lindner <mareklindner@neomailbox.ch>
---
 include/uapi/linux/batman_adv.h |  6 ++++++
 net/batman-adv/netlink.c        | 17 +++++++++++++++++
 2 files changed, 23 insertions(+)

diff --git a/include/uapi/linux/batman_adv.h b/include/uapi/linux/batman_adv.h
index b37cb923..6d36e4b4 100644
--- a/include/uapi/linux/batman_adv.h
+++ b/include/uapi/linux/batman_adv.h
@@ -449,6 +449,12 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_HOP_PENALTY,
 
+	/**
+	 * @BATADV_ATTR_LOG_LEVEL: bitmask with to define which debug messages
+	 *  should be send to the debug log/trace ring buffer
+	 */
+	BATADV_ATTR_LOG_LEVEL,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
diff --git a/net/batman-adv/netlink.c b/net/batman-adv/netlink.c
index 8602129f..d39f8f83 100644
--- a/net/batman-adv/netlink.c
+++ b/net/batman-adv/netlink.c
@@ -53,6 +53,7 @@
 #include "gateway_client.h"
 #include "gateway_common.h"
 #include "hard-interface.h"
+#include "log.h"
 #include "multicast.h"
 #include "originator.h"
 #include "soft-interface.h"
@@ -153,6 +154,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_GW_MODE]			= { .type = NLA_U8 },
 	[BATADV_ATTR_GW_SEL_CLASS]		= { .type = NLA_U32 },
 	[BATADV_ATTR_HOP_PENALTY]		= { .type = NLA_U8 },
+	[BATADV_ATTR_LOG_LEVEL]			= { .type = NLA_U32 },
 };
 
 /**
@@ -335,6 +337,12 @@ static int batadv_netlink_mesh_put(struct sk_buff *msg,
 		       atomic_read(&bat_priv->hop_penalty)))
 		goto nla_put_failure;
 
+#ifdef CONFIG_BATMAN_ADV_DEBUG
+	if (nla_put_u32(msg, BATADV_ATTR_LOG_LEVEL,
+			atomic_read(&bat_priv->log_level)))
+		goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_DEBUG */
+
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 
@@ -547,6 +555,15 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 		atomic_set(&bat_priv->hop_penalty, nla_get_u8(attr));
 	}
 
+#ifdef CONFIG_BATMAN_ADV_DEBUG
+	if (info->attrs[BATADV_ATTR_LOG_LEVEL]) {
+		attr = info->attrs[BATADV_ATTR_LOG_LEVEL];
+
+		atomic_set(&bat_priv->log_level,
+			   nla_get_u32(attr) & BATADV_DBG_ALL);
+	}
+#endif /* CONFIG_BATMAN_ADV_DEBUG */
+
 	batadv_netlink_notify_mesh(bat_priv);
 
 	return 0;
-- 
2.20.1


  parent reply	other threads:[~2019-01-19 15:56 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-19 15:56 [RFC v4 00/19] batman-adv: netlink restructuring, part 2 Sven Eckelmann
2019-01-19 15:56 ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 01/19] batman-adv: Move common genl doit code pre/post hooks Sven Eckelmann
2019-01-19 15:56   ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 02/19] batman-adv: Prepare framework for mesh genl config Sven Eckelmann
2019-01-19 15:56   ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 03/19] batman-adv: Prepare framework for hardif " Sven Eckelmann
2019-01-19 15:56   ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 04/19] batman-adv: Prepare framework for vlan " Sven Eckelmann
2019-01-19 15:56   ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-21  9:44   ` Jiri Pirko
2019-01-21  9:44     ` [B.A.T.M.A.N.] " Jiri Pirko
2019-01-19 15:56 ` [RFC v4 05/19] batman-adv: Add aggregated_ogms mesh genl configuration Sven Eckelmann
2019-01-19 15:56   ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 06/19] batman-adv: Add ap_isolation mesh/vlan " Sven Eckelmann
2019-01-19 15:56   ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 07/19] batman-adv: Add bonding mesh " Sven Eckelmann
2019-01-19 15:56   ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 08/19] batman-adv: Add bridge_loop_avoidance " Sven Eckelmann
2019-01-19 15:56   ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 09/19] batman-adv: Add distributed_arp_table " Sven Eckelmann
2019-01-19 15:56   ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 10/19] batman-adv: Add fragmentation " Sven Eckelmann
2019-01-19 15:56   ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 11/19] batman-adv: Add gateway " Sven Eckelmann
2019-01-19 15:56   ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 12/19] batman-adv: Add hop_penalty " Sven Eckelmann
2019-01-19 15:56   ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` Sven Eckelmann [this message]
2019-01-19 15:56   ` [B.A.T.M.A.N.] [RFC v4 13/19] batman-adv: Add log_level " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 14/19] batman-adv: Add multicast_mode " Sven Eckelmann
2019-01-19 15:56   ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 15/19] batman-adv: Add network_coding " Sven Eckelmann
2019-01-19 15:56   ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 16/19] batman-adv: Add orig_interval " Sven Eckelmann
2019-01-19 15:56   ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 17/19] batman-adv: Add elp_interval hardif " Sven Eckelmann
2019-01-19 15:56   ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 18/19] batman-adv: Add throughput_override " Sven Eckelmann
2019-01-19 15:56   ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-19 15:56 ` [RFC v4 19/19] batman-adv: Trigger genl notification on sysfs config change Sven Eckelmann
2019-01-19 15:56   ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-21  9:47 ` [RFC v4 00/19] batman-adv: netlink restructuring, part 2 Jiri Pirko
2019-01-21  9:47   ` [B.A.T.M.A.N.] " Jiri Pirko
2019-01-26 10:47 ` Sven Eckelmann
2019-01-26 10:47   ` [B.A.T.M.A.N.] " Sven Eckelmann
2019-01-27  8:45   ` Jiri Pirko
2019-01-27  8:45     ` [B.A.T.M.A.N.] " Jiri Pirko
2019-02-05 17:04   ` Simon Wunderlich
2019-02-05 19:24   ` Linus Lüssing
2019-02-06 18:20     ` Sven Eckelmann
2019-02-06 19:08       ` Linus Lüssing
2019-02-07 10:02         ` Sven Eckelmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190119155626.6414-14-sven@narfation.org \
    --to=sven@narfation.org \
    --cc=b.a.t.m.a.n@lists.open-mesh.org \
    --cc=jiri@mellanox.com \
    --cc=mareklindner@neomailbox.ch \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.