From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 00/21] imx: vybrid: Update BK4 and PCM052 boards to only use DM/DTS
Date: Sun, 20 Jan 2019 14:34:04 +0100 [thread overview]
Message-ID: <20190120133425.17526-1-lukma@denx.de> (raw)
This patch series converts PCM052 and BK4 to use Driver Model and Device
Tree.
Some notable changes:
- The way how MAC address is read from fuses can now be adjusted
- DTS improvement/sync with kernel (also extract u-boot specific properties)
- Using generic code instead of one from board
The output of u-boot boot:
U-Boot 2019.01-rc3-00076-gc149229be0 (Jan 14 2019 - 08:38:48 +0100)
CPU: Freescale Vybrid VF610 at 396 MHz
Reset cause: POWER ON RESET
Model: Liebherr (LVF) BK4 Vybrid Board
Board: BK4r1 (L333)
DRAM: 512 MiB
NAND: 1024 MiB
MMC: FSL_SDHC: 0
Loading Environment from NAND... OK
In: serial at 40028000
Out: serial at 40028000
Err: serial at 40028000
Net: eth0: fec at 400d0000, eth1: fec at 400d1000
Enter passphrase to stop autoboot, booting in 3 seconds
Buildman CI:
./tools/buildman/buildman.py --branch=HEAD~4 vf610 mx6 vybrid --detail --verbose --show_errors --force-build --count=21 --output-dir=../BUILD/
Travis-CI:
https://travis-ci.org/lmajewski/u-boot-dfu/jobs/481963146
U-boot master branch: SHA1: c4d323793ba2e0616d93ca104e1e2b9a9fbccf9b
Changes in v2:
- Rename pcm052.dts to vf610-pcm052.dts
- Rename bk4r1.dts to vf610-bk4r1.dts
- Extract 'u-boot,dm-pre-reloc;' property to separate file (to facilitate
sync with Linux kernel dts files)
- New patch
- Disable EFI related support and commands (as we do not plan to
use EFI on this setup)
Lukasz Majewski (21):
net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver
net: Kconfig: FEC: Add dependency on VF610
vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions
vybrid: clock: Provide enable_i2c_clk() function for Vybrid
vybrid: Define the imx_get_mac_from_fuse() as a __weak function
pcm052: board: Remove "m4go" command as it is superseded by "bootaux"
pcm052: board: vybrid: Update the board name for BK4 device
ARM: DTS: vybrid: Update vf.dtsi file to descibe more vf610 hardware
pcm052: board: cosmetic: Add copyright notice to pcm052.c
ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052)
ARM: DTS: Provide vf610-bk4r1-u-boot.dtsi for U-Boot specific
properties
defconfig: bk4/pcm052: Update bk4r1|pcm052_defconfig to support DM/DT
config: pcm052: Use SZ_X{MK} from linux/sizes.h for
include/configs/pcm052.h
config: bk4: Update include/configs/bk4r1.h file
pcm052: board: Remove in-board setup code (it is now replaced by DM
setup)
config: bk4: Update u-boot script to support recovery via SD card
config: bk4: Update u-boot envs to support NOR memories initial setup
pcm052: bk4: sdcard: Add support for SD card booting/recovery
pcm052: board: Add code to setup LED default states
pcm052: mac: Provide board specific imx_get_mac_from_fuse() function
pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy
arch/arm/cpu/armv7/vf610/Kconfig | 1 +
arch/arm/cpu/armv7/vf610/generic.c | 21 +-
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/bk4r1.dts | 47 ----
arch/arm/dts/vf.dtsi | 62 +++++
arch/arm/dts/vf610-bk4r1-u-boot.dtsi | 27 ++
arch/arm/dts/vf610-bk4r1.dts | 97 +++++++
arch/arm/dts/{pcm052.dts => vf610-pcm052.dts} | 6 +-
arch/arm/dts/vf610-pcm052.dtsi | 259 +++++++++++++++++
arch/arm/dts/vf610-pinfunc.h | 50 ++++
arch/arm/include/asm/arch-vf610/clock.h | 3 +
arch/arm/include/asm/arch-vf610/imx-regs.h | 2 +
board/phytec/pcm052/pcm052.c | 386 ++++++--------------------
configs/bk4r1_defconfig | 49 +++-
configs/pcm052_defconfig | 36 ++-
drivers/net/Kconfig | 2 +-
drivers/net/fec_mxc.c | 1 +
include/configs/bk4r1.h | 263 +++++++++++++++++-
include/configs/pcm052.h | 51 +---
19 files changed, 956 insertions(+), 411 deletions(-)
delete mode 100644 arch/arm/dts/bk4r1.dts
create mode 100644 arch/arm/dts/vf610-bk4r1-u-boot.dtsi
create mode 100644 arch/arm/dts/vf610-bk4r1.dts
rename arch/arm/dts/{pcm052.dts => vf610-pcm052.dts} (81%)
create mode 100644 arch/arm/dts/vf610-pcm052.dtsi
--
2.11.0
next reply other threads:[~2019-01-20 13:34 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-20 13:34 Lukasz Majewski [this message]
2019-01-20 13:34 ` [U-Boot] [PATCH v2 01/21] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver Lukasz Majewski
2019-02-01 9:53 ` Stefan Agner
2019-01-20 13:34 ` [U-Boot] [PATCH v2 02/21] net: Kconfig: FEC: Add dependency on VF610 Lukasz Majewski
2019-02-01 9:54 ` Stefan Agner
2019-01-20 13:34 ` [U-Boot] [PATCH v2 03/21] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions Lukasz Majewski
2019-02-01 13:06 ` Stefan Agner
2019-01-20 13:34 ` [U-Boot] [PATCH v2 04/21] vybrid: clock: Provide enable_i2c_clk() function for Vybrid Lukasz Majewski
2019-02-01 13:19 ` Stefan Agner
2019-02-01 14:19 ` Lukasz Majewski
2019-02-01 14:53 ` Stefan Agner
2019-02-01 20:49 ` Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 05/21] vybrid: Define the imx_get_mac_from_fuse() as a __weak function Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 06/21] pcm052: board: Remove "m4go" command as it is superseded by "bootaux" Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 07/21] pcm052: board: vybrid: Update the board name for BK4 device Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 08/21] ARM: DTS: vybrid: Update vf.dtsi file to descibe more vf610 hardware Lukasz Majewski
2019-02-01 13:15 ` Stefan Agner
2019-01-20 13:34 ` [U-Boot] [PATCH v2 09/21] pcm052: board: cosmetic: Add copyright notice to pcm052.c Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 10/21] ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052) Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 11/21] ARM: DTS: Provide vf610-bk4r1-u-boot.dtsi for U-Boot specific properties Lukasz Majewski
2019-01-22 2:29 ` Tom Rini
2019-01-20 13:34 ` [U-Boot] [PATCH v2 12/21] defconfig: bk4/pcm052: Update bk4r1|pcm052_defconfig to support DM/DT Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 13/21] config: pcm052: Use SZ_X{MK} from linux/sizes.h for include/configs/pcm052.h Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 14/21] config: bk4: Update include/configs/bk4r1.h file Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 15/21] pcm052: board: Remove in-board setup code (it is now replaced by DM setup) Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 16/21] config: bk4: Update u-boot script to support recovery via SD card Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 17/21] config: bk4: Update u-boot envs to support NOR memories initial setup Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 18/21] pcm052: bk4: sdcard: Add support for SD card booting/recovery Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 19/21] pcm052: board: Add code to setup LED default states Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 20/21] pcm052: mac: Provide board specific imx_get_mac_from_fuse() function Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 21/21] pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy Lukasz Majewski
2019-01-21 8:33 ` [U-Boot] [PATCH v2 00/21] imx: vybrid: Update BK4 and PCM052 boards to only use DM/DTS Lukasz Majewski
2019-01-21 14:22 ` Lukasz Majewski
2019-02-01 13:22 ` Stefan Agner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190120133425.17526-1-lukma@denx.de \
--to=lukma@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.