From: Lukasz Majewski <lukma@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 03/21] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions
Date: Sun, 20 Jan 2019 14:34:07 +0100 [thread overview]
Message-ID: <20190120133425.17526-4-lukma@denx.de> (raw)
In-Reply-To: <20190120133425.17526-1-lukma@denx.de>
This patch provides definitions necessary for VF610 DDR pad configurations.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
---
Changes in v2: None
arch/arm/dts/vf610-pinfunc.h | 50 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/arch/arm/dts/vf610-pinfunc.h b/arch/arm/dts/vf610-pinfunc.h
index fcad7132c8..24d7126756 100644
--- a/arch/arm/dts/vf610-pinfunc.h
+++ b/arch/arm/dts/vf610-pinfunc.h
@@ -807,4 +807,54 @@
#define VF610_PAD_PTA7__GPIO_134 0x218 0x000 ALT0 0x0
#define VF610_PAD_PTA7__VIU_PIX_CLK 0x218 0x3AC ALT1 0x1
+#define VF610_PAD_DDR_RESETB 0x21c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A15__DDR_A_15 0x220 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A14__DDR_A_14 0x224 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A13__DDR_A_13 0x228 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A12__DDR_A_12 0x22c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A11__DDR_A_11 0x230 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A10__DDR_A_10 0x234 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A9__DDR_A_9 0x238 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A8__DDR_A_8 0x23c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A7__DDR_A_7 0x240 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A6__DDR_A_6 0x244 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A5__DDR_A_5 0x248 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A4__DDR_A_4 0x24c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A3__DDR_A_3 0x250 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A2__DDR_A_2 0x254 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A1__DDR_A_1 0x258 0x000 ALT0 0x0
+#define VF610_PAD_DDR_A0__DDR_A_0 0x25c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_BA2__DDR_BA_2 0x260 0x000 ALT0 0x0
+#define VF610_PAD_DDR_BA1__DDR_BA_1 0x264 0x000 ALT0 0x0
+#define VF610_PAD_DDR_BA0__DDR_BA_0 0x268 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CAS__DDR_CAS_B 0x26c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CKE__DDR_CKE_0 0x270 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CLK__DDR_CLK_0 0x274 0x000 ALT0 0x0
+#define VF610_PAD_DDR_CS__DDR_CS_B_0 0x278 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D15__DDR_D_15 0x27c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D14__DDR_D_14 0x280 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D13__DDR_D_13 0x284 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D12__DDR_D_12 0x288 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D11__DDR_D_11 0x28c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D10__DDR_D_10 0x290 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D9__DDR_D_9 0x294 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D8__DDR_D_8 0x298 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D7__DDR_D_7 0x29c 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D6__DDR_D_6 0x2a0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D5__DDR_D_5 0x2a4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D4__DDR_D_4 0x2a8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D3__DDR_D_3 0x2ac 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D2__DDR_D_2 0x2b0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D1__DDR_D_1 0x2b4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_D0__DDR_D_0 0x2b8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQM1__DDR_DQM_1 0x2bc 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQM0__DDR_DQM_0 0x2c0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQS1__DDR_DQS_1 0x2c4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DQS0__DDR_DQS_0 0x2c8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_RAS__DDR_RAS_B 0x2cc 0x000 ALT0 0x0
+#define VF610_PAD_DDR_WE__DDR_WE_B 0x2d0 0x000 ALT0 0x0
+#define VF610_PAD_DDR_ODT1__DDR_ODT_0 0x2d4 0x000 ALT0 0x0
+#define VF610_PAD_DDR_ODT0__DDR_ODT_1 0x2d8 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DDRBYTE1__DDR_DDRBYTE1 0x2dc 0x000 ALT0 0x0
+#define VF610_PAD_DDR_DDRBYTE0__DDR_DDRBYTE0 0x2e0 0x000 ALT0 0x0
#endif
--
2.11.0
next prev parent reply other threads:[~2019-01-20 13:34 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-20 13:34 [U-Boot] [PATCH v2 00/21] imx: vybrid: Update BK4 and PCM052 boards to only use DM/DTS Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 01/21] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver Lukasz Majewski
2019-02-01 9:53 ` Stefan Agner
2019-01-20 13:34 ` [U-Boot] [PATCH v2 02/21] net: Kconfig: FEC: Add dependency on VF610 Lukasz Majewski
2019-02-01 9:54 ` Stefan Agner
2019-01-20 13:34 ` Lukasz Majewski [this message]
2019-02-01 13:06 ` [U-Boot] [PATCH v2 03/21] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions Stefan Agner
2019-01-20 13:34 ` [U-Boot] [PATCH v2 04/21] vybrid: clock: Provide enable_i2c_clk() function for Vybrid Lukasz Majewski
2019-02-01 13:19 ` Stefan Agner
2019-02-01 14:19 ` Lukasz Majewski
2019-02-01 14:53 ` Stefan Agner
2019-02-01 20:49 ` Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 05/21] vybrid: Define the imx_get_mac_from_fuse() as a __weak function Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 06/21] pcm052: board: Remove "m4go" command as it is superseded by "bootaux" Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 07/21] pcm052: board: vybrid: Update the board name for BK4 device Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 08/21] ARM: DTS: vybrid: Update vf.dtsi file to descibe more vf610 hardware Lukasz Majewski
2019-02-01 13:15 ` Stefan Agner
2019-01-20 13:34 ` [U-Boot] [PATCH v2 09/21] pcm052: board: cosmetic: Add copyright notice to pcm052.c Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 10/21] ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052) Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 11/21] ARM: DTS: Provide vf610-bk4r1-u-boot.dtsi for U-Boot specific properties Lukasz Majewski
2019-01-22 2:29 ` Tom Rini
2019-01-20 13:34 ` [U-Boot] [PATCH v2 12/21] defconfig: bk4/pcm052: Update bk4r1|pcm052_defconfig to support DM/DT Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 13/21] config: pcm052: Use SZ_X{MK} from linux/sizes.h for include/configs/pcm052.h Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 14/21] config: bk4: Update include/configs/bk4r1.h file Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 15/21] pcm052: board: Remove in-board setup code (it is now replaced by DM setup) Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 16/21] config: bk4: Update u-boot script to support recovery via SD card Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 17/21] config: bk4: Update u-boot envs to support NOR memories initial setup Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 18/21] pcm052: bk4: sdcard: Add support for SD card booting/recovery Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 19/21] pcm052: board: Add code to setup LED default states Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 20/21] pcm052: mac: Provide board specific imx_get_mac_from_fuse() function Lukasz Majewski
2019-01-20 13:34 ` [U-Boot] [PATCH v2 21/21] pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy Lukasz Majewski
2019-01-21 8:33 ` [U-Boot] [PATCH v2 00/21] imx: vybrid: Update BK4 and PCM052 boards to only use DM/DTS Lukasz Majewski
2019-01-21 14:22 ` Lukasz Majewski
2019-02-01 13:22 ` Stefan Agner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190120133425.17526-4-lukma@denx.de \
--to=lukma@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.