[PATCH 4.14 00/63] 4.14.96-stable review

[PATCH 4.14 00/63] 4.14.96-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.14.96 release.
There are 63 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat Jan 26 19:01:15 UTC 2019.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.96-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.14.96-rc1

Corey Minyard <cminyard@mvista.com>
    ipmi:ssif: Fix handling of multi-part return messages

Marc Zyngier <marc.zyngier@arm.com>
    PCI: dwc: Move interrupt acking into the proper callback

Zhenyu Wang <zhenyuw@linux.intel.com>
    drm/i915/gvt: Fix mmap range check

Steve French <stfrench@microsoft.com>
    cifs: allow disabling insecure dialects in the config

Corey Minyard <cminyard@mvista.com>
    ipmi:pci: Blacklist a Realtek "IPMI" device

Scott Mayhew <smayhew@redhat.com>
    nfs: fix a deadlock in nfs client initialization

Michal Hocko <mhocko@suse.com>
    mm, proc: be more verbose about unstable VMA flags in /proc/<pid>/smaps

Aaron Lu <aaron.lu@intel.com>
    mm/swap: use nr_node_ids for avail_lists in swap_info_struct

Brian Foster <bfoster@redhat.com>
    mm/page-writeback.c: don't break integrity writeback on ->writepage() error

Junxiao Bi <junxiao.bi@oracle.com>
    ocfs2: fix panic due to unrecovered local alloc

Qian Cai <cai@lca.pw>
    scsi: megaraid: fix out-of-bound array accesses

Yanjiang Jin <yanjiang.jin@hxt-semitech.com>
    scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown()

Kevin Barnett <kevin.barnett@microsemi.com>
    scsi: smartpqi: correct lun reset issues

Parvi Kaustubhi <pkaustub@cisco.com>
    IB/usnic: Fix potential deadlock

Daniel Vetter <daniel.vetter@ffwll.ch>
    sysfs: Disable lockdep for driver bind/unbind files

Takashi Sakamoto <o-takashi@sakamocchi.jp>
    ALSA: bebob: fix model-id of unit for Apogee Ensemble

Yangtao Li <tiny.windzz@gmail.com>
    clocksource/drivers/integrator-ap: Add missing of_node_put()

Javier Barrio <javier.barrio.mart@gmail.com>
    quota: Lock s_umount in exclusive mode for Q_XQUOTA{ON,OFF} quotactls.

Nikos Tsironis <ntsironis@arrikto.com>
    dm snapshot: Fix excessive memory usage and workqueue stalls

Arnaldo Carvalho de Melo <acme@redhat.com>
    tools lib subcmd: Don't add the kernel sources to the include path

Nikos Tsironis <ntsironis@arrikto.com>
    dm kcopyd: Fix bug causing workqueue stalls

AliOS system security <alios_sys_security@linux.alibaba.com>
    dm crypt: use u64 instead of sector_t to store iv_offset

Taehee Yoo <ap420073@gmail.com>
    netfilter: ipt_CLUSTERIP: check MAC address when duplicate config is set

Arnaldo Carvalho de Melo <acme@redhat.com>
    perf parse-events: Fix unchecked usage of strncpy()

Arnaldo Carvalho de Melo <acme@redhat.com>
    perf svghelper: Fix unchecked usage of strncpy()

Adrian Hunter <adrian.hunter@intel.com>
    perf intel-pt: Fix error with config term "pt=0"

Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
    tty/serial: do not free trasnmit buffer page under port lock

Johannes Thumshirn <jthumshirn@suse.de>
    btrfs: improve error handling of btrfs_add_link

Jonas Danielsson <jonas@orbital-systems.com>
    mmc: atmel-mci: do not assume idle after atmci_request_end

Masahiro Yamada <yamada.masahiro@socionext.com>
    kconfig: fix memory leak when EOF is encountered in quotation

Masahiro Yamada <yamada.masahiro@socionext.com>
    kconfig: fix file name and line number of warn_ignored_character()

Will Deacon <will.deacon@arm.com>
    arm64: Fix minor issues with the dcache_by_line_op macro

Lucas Stach <l.stach@pengutronix.de>
    clk: imx6q: reset exclusive gates on init

Dmitry V. Levin <ldv@altlinux.org>
    selftests: do not macro-expand failed assertion expressions

David Disseldorp <ddiss@suse.de>
    scsi: target: use consistent left-aligned ASCII INQUIRY data

yupeng <yupeng0921@gmail.com>
    net: call sk_dst_reset when set SO_DONTROUTE

Vivek Gautam <vivek.gautam@codeaurora.org>
    media: venus: core: Set dma maximum segment size

Nathan Chancellor <natechancellor@gmail.com>
    media: firewire: Fix app_info parameter type in avc_ca{,_app}_info

Breno Leitao <leitao@debian.org>
    powerpc/pseries/cpuidle: Fix preempt warning

Breno Leitao <leitao@debian.org>
    powerpc/xmon: Fix invocation inside lock region

Joel Fernandes (Google) <joel@joelfernandes.org>
    pstore/ram: Do not treat empty buffers as valid

A.s. Dong <aisheng.dong@nxp.com>
    clk: imx: make mux parent strings const

Daniel Santos <daniel.santos@pobox.com>
    jffs2: Fix use of uninitialized delayed_work, lockdep breakage

Chuck Lever <chuck.lever@oracle.com>
    rxe: IB_WR_REG_MR does not capture MR's iova field

Ondrej Mosnacek <omosnace@redhat.com>
    selinux: always allow mounting submounts

Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
    usb: gadget: udc: renesas_usb3: add a safety connection way for forced_b_device

Anders Roxell <anders.roxell@linaro.org>
    arm64: perf: set suppress_bind_attrs flag to true

Maciej W. Rozycki <macro@linux-mips.org>
    MIPS: SiByte: Enable swiotlb for SWARM, LittleSur and BigSur

Borislav Petkov <bp@suse.de>
    x86/mce: Fix -Wmissing-prototypes warnings

Takashi Sakamoto <o-takashi@sakamocchi.jp>
    ALSA: oxfw: add support for APOGEE duet FireWire

Anders Roxell <anders.roxell@linaro.org>
    serial: set suppress_bind_attrs flag only if builtin

Anders Roxell <anders.roxell@linaro.org>
    writeback: don't decrement wb->refcnt if !wb->bdi

Miroslav Lichvar <mlichvar@redhat.com>
    e1000e: allow non-monotonic SYSTIM readings

João Paulo Rechi Vita <jprvita@gmail.com>
    platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey

Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
    gpio: pl061: Move irq_chip definition inside struct pl061

Andrew Lunn <andrew@lunn.ch>
    net: dsa: mv88x6xxx: mv88e6390 errata

David Ahern <dsahern@gmail.com>
    ipv6: Take rcu_read_lock in __inet6_bind for mapped addresses

Kai-Heng Feng <kai.heng.feng@canonical.com>
    r8169: Add support for new Realtek Ethernet

Daniele Palmas <dnlplm@gmail.com>
    qmi_wwan: add MTU default to qmap network interface

David Rientjes <rientjes@google.com>
    net, skbuff: do not prefer skb allocation fails early

Ido Schimmel <idosch@mellanox.com>
    mlxsw: spectrum_switchdev: Set PVID correctly during VLAN deletion

Jiri Pirko <jiri@mellanox.com>
    mlxsw: spectrum: Disable lag port TX before removing it

David Ahern <dsahern@gmail.com>
    ipv6: Consider sk_bound_dev_if when binding a socket to a v4 mapped address


-------------

Diffstat:

 Documentation/filesystems/proc.txt                 |   4 +-
 Makefile                                           |   4 +-
 arch/arm64/include/asm/assembler.h                 |  30 +++---
 arch/arm64/kernel/perf_event.c                     |   1 +
 arch/arm64/mm/cache.S                              |   3 +
 arch/mips/Kconfig                                  |   3 +
 arch/mips/sibyte/common/Makefile                   |   1 +
 arch/mips/sibyte/common/dma.c                      |  14 +++
 arch/powerpc/xmon/xmon.c                           |  18 +++-
 arch/x86/include/asm/traps.h                       |   6 +-
 arch/x86/kernel/cpu/mcheck/mce_amd.c               |   5 +-
 arch/x86/kernel/cpu/mcheck/therm_throt.c           |   3 +-
 arch/x86/kernel/cpu/mcheck/threshold.c             |   3 +-
 drivers/base/bus.c                                 |   7 +-
 drivers/char/ipmi/ipmi_si_intf.c                   |  12 +++
 drivers/char/ipmi/ipmi_ssif.c                      |  25 +++--
 drivers/clk/imx/clk-busy.c                         |   2 +-
 drivers/clk/imx/clk-fixup-mux.c                    |   2 +-
 drivers/clk/imx/clk-imx6q.c                        |   6 +-
 drivers/clk/imx/clk.h                              |  18 ++--
 drivers/clocksource/timer-integrator-ap.c          |  25 +++--
 drivers/cpuidle/cpuidle-pseries.c                  |   8 +-
 drivers/gpio/gpio-pl061.c                          |  21 ++--
 drivers/gpu/drm/i915/gvt/kvmgt.c                   |  21 +++-
 drivers/infiniband/hw/usnic/usnic_ib_verbs.c       |  11 +-
 drivers/infiniband/sw/rxe/rxe_req.c                |   1 +
 drivers/md/dm-crypt.c                              |   6 +-
 drivers/md/dm-kcopyd.c                             |  19 +++-
 drivers/md/dm-snap.c                               |  22 ++++
 drivers/media/firewire/firedtv-avc.c               |   6 +-
 drivers/media/firewire/firedtv.h                   |   6 +-
 drivers/media/platform/qcom/venus/core.c           |   8 ++
 drivers/mmc/host/atmel-mci.c                       |   3 +-
 drivers/net/dsa/mv88e6xxx/chip.c                   | 113 +++++++++++++++++++++
 drivers/net/dsa/mv88e6xxx/chip.h                   |   5 +
 drivers/net/dsa/mv88e6xxx/port.h                   |  10 ++
 drivers/net/ethernet/intel/e1000e/ptp.c            |  13 ++-
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c     |   7 +-
 .../ethernet/mellanox/mlxsw/spectrum_switchdev.c   |   2 +-
 drivers/net/ethernet/realtek/r8169.c               |   2 +
 drivers/net/usb/qmi_wwan.c                         |   1 +
 drivers/pci/dwc/pcie-designware-host.c             |  15 ++-
 drivers/platform/x86/asus-wmi.c                    |   3 +-
 drivers/scsi/megaraid/megaraid_sas_fp.c            |   2 +-
 drivers/scsi/megaraid/megaraid_sas_fusion.c        |   2 +-
 drivers/scsi/smartpqi/smartpqi_init.c              |   4 +
 drivers/target/target_core_spc.c                   |  17 +++-
 drivers/tty/serial/amba-pl011.c                    |   2 +
 drivers/tty/serial/pic32_uart.c                    |   1 +
 drivers/tty/serial/serial_core.c                   |  22 ++--
 drivers/tty/serial/xilinx_uartps.c                 |   1 +
 drivers/usb/gadget/udc/renesas_usb3.c              |  15 ++-
 fs/btrfs/inode.c                                   |   7 +-
 fs/cifs/Kconfig                                    |  17 +++-
 fs/cifs/connect.c                                  |   9 ++
 fs/jffs2/super.c                                   |   3 +-
 fs/nfs/client.c                                    |  11 ++
 fs/nfs/nfs4client.c                                |  17 +++-
 fs/ocfs2/localalloc.c                              |   9 +-
 fs/pstore/ram_core.c                               |   5 +
 fs/quota/quota.c                                   |   3 +-
 include/linux/backing-dev-defs.h                   |   8 ++
 include/linux/swap.h                               |  11 +-
 mm/page-writeback.c                                |  35 ++++---
 mm/swapfile.c                                      |   3 +-
 net/core/skbuff.c                                  |   7 +-
 net/core/sock.c                                    |   1 +
 net/ipv4/netfilter/ipt_CLUSTERIP.c                 |   3 +-
 net/ipv6/af_inet6.c                                |  14 ++-
 scripts/kconfig/zconf.l                            |   4 +-
 security/selinux/hooks.c                           |   2 +-
 sound/firewire/Kconfig                             |   1 +
 sound/firewire/bebob/bebob.c                       |   2 +-
 sound/firewire/oxfw/oxfw.c                         |   8 ++
 tools/lib/subcmd/Makefile                          |   2 -
 tools/perf/arch/x86/util/intel-pt.c                |  11 ++
 tools/perf/util/parse-events.c                     |   2 +-
 tools/perf/util/svghelper.c                        |   2 +-
 tools/testing/selftests/kselftest_harness.h        |  42 ++++----
 79 files changed, 624 insertions(+), 176 deletions(-)

[PATCH 4.14 01/63] ipv6: Consider sk_bound_dev_if when binding a socket to a v4 mapped address

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Ahern <dsahern@gmail.com>

[ Upstream commit ec90ad334986fa5856d11dd272f7f22fa86c55c4 ]

Similar to c5ee066333eb ("ipv6: Consider sk_bound_dev_if when binding a
socket to an address"), binding a socket to v4 mapped addresses needs to
consider if the socket is bound to a device.

This problem also exists from the beginning of git history.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/af_inet6.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -317,6 +317,7 @@ int inet6_bind(struct socket *sock, stru
 
 	/* Check if the address belongs to the host. */
 	if (addr_type == IPV6_ADDR_MAPPED) {
+		struct net_device *dev = NULL;
 		int chk_addr_ret;
 
 		/* Binding to v4-mapped address on a v6-only socket
@@ -327,9 +328,17 @@ int inet6_bind(struct socket *sock, stru
 			goto out;
 		}
 
+		if (sk->sk_bound_dev_if) {
+			dev = dev_get_by_index_rcu(net, sk->sk_bound_dev_if);
+			if (!dev) {
+				err = -ENODEV;
+				goto out;
+			}
+		}
+
 		/* Reproduce AF_INET checks to make the bindings consistent */
 		v4addr = addr->sin6_addr.s6_addr32[3];
-		chk_addr_ret = inet_addr_type(net, v4addr);
+		chk_addr_ret = inet_addr_type_dev_table(net, dev, v4addr);
 		if (!net->ipv4.sysctl_ip_nonlocal_bind &&
 		    !(inet->freebind || inet->transparent) &&
 		    v4addr != htonl(INADDR_ANY) &&

[PATCH 4.14 02/63] mlxsw: spectrum: Disable lag port TX before removing it

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Pirko <jiri@mellanox.com>

[ Upstream commit 8adbe212a159d9c78a90fca1d854f6e63452426b ]

Make sure that lag port TX is disabled before mlxsw_sp_port_lag_leave()
is called and prevent from possible EMAD error.

Fixes: 0d65fc13042f ("mlxsw: spectrum: Implement LAG port join/leave")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -4276,12 +4276,15 @@ static int mlxsw_sp_netdevice_port_upper
 							   lower_dev,
 							   upper_dev);
 		} else if (netif_is_lag_master(upper_dev)) {
-			if (info->linking)
+			if (info->linking) {
 				err = mlxsw_sp_port_lag_join(mlxsw_sp_port,
 							     upper_dev);
-			else
+			} else {
+				mlxsw_sp_port_lag_tx_en_set(mlxsw_sp_port,
+							    false);
 				mlxsw_sp_port_lag_leave(mlxsw_sp_port,
 							upper_dev);
+			}
 		} else if (netif_is_ovs_master(upper_dev)) {
 			if (info->linking)
 				err = mlxsw_sp_port_ovs_join(mlxsw_sp_port);

[PATCH 4.14 03/63] mlxsw: spectrum_switchdev: Set PVID correctly during VLAN deletion

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ido Schimmel <idosch@mellanox.com>

[ Upstream commit 674bed5df4cab8f96d04f7b99608883a48f9226b ]

When a VLAN is deleted from a bridge port we should not change the PVID
unless the deleted VLAN is the PVID.

Fixes: fe9ccc785de5 ("mlxsw: spectrum_switchdev: Don't batch VLAN operations")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c
@@ -1424,7 +1424,7 @@ static void
 mlxsw_sp_bridge_port_vlan_del(struct mlxsw_sp_port *mlxsw_sp_port,
 			      struct mlxsw_sp_bridge_port *bridge_port, u16 vid)
 {
-	u16 pvid = mlxsw_sp_port->pvid == vid ? 0 : vid;
+	u16 pvid = mlxsw_sp_port->pvid == vid ? 0 : mlxsw_sp_port->pvid;
 	struct mlxsw_sp_port_vlan *mlxsw_sp_port_vlan;
 
 	mlxsw_sp_port_vlan = mlxsw_sp_port_vlan_find_by_vid(mlxsw_sp_port, vid);

[PATCH 4.14 04/63] net, skbuff: do not prefer skb allocation fails early

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Rientjes <rientjes@google.com>

[ Upstream commit f8c468e8537925e0c4607263f498a1b7c0c8982e ]

Commit dcda9b04713c ("mm, tree wide: replace __GFP_REPEAT by
__GFP_RETRY_MAYFAIL with more useful semantic") replaced __GFP_REPEAT in
alloc_skb_with_frags() with __GFP_RETRY_MAYFAIL when the allocation may
directly reclaim.

The previous behavior would require reclaim up to 1 << order pages for
skb aligned header_len of order > PAGE_ALLOC_COSTLY_ORDER before failing,
otherwise the allocations in alloc_skb() would loop in the page allocator
looking for memory.  __GFP_RETRY_MAYFAIL makes both allocations failable
under memory pressure, including for the HEAD allocation.

This can cause, among many other things, write() to fail with ENOTCONN
during RPC when under memory pressure.

These allocations should succeed as they did previous to dcda9b04713c
even if it requires calling the oom killer and additional looping in the
page allocator to find memory.  There is no way to specify the previous
behavior of __GFP_REPEAT, but it's unlikely to be necessary since the
previous behavior only guaranteed that 1 << order pages would be reclaimed
before failing for order > PAGE_ALLOC_COSTLY_ORDER.  That reclaim is not
guaranteed to be contiguous memory, so repeating for such large orders is
usually not beneficial.

Removing the setting of __GFP_RETRY_MAYFAIL to restore the previous
behavior, specifically not allowing alloc_skb() to fail for small orders
and oom kill if necessary rather than allowing RPCs to fail.

Fixes: dcda9b04713c ("mm, tree wide: replace __GFP_REPEAT by __GFP_RETRY_MAYFAIL with more useful semantic")
Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/skbuff.c |    7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -5154,7 +5154,6 @@ struct sk_buff *alloc_skb_with_frags(uns
 	unsigned long chunk;
 	struct sk_buff *skb;
 	struct page *page;
-	gfp_t gfp_head;
 	int i;
 
 	*errcode = -EMSGSIZE;
@@ -5164,12 +5163,8 @@ struct sk_buff *alloc_skb_with_frags(uns
 	if (npages > MAX_SKB_FRAGS)
 		return NULL;
 
-	gfp_head = gfp_mask;
-	if (gfp_head & __GFP_DIRECT_RECLAIM)
-		gfp_head |= __GFP_RETRY_MAYFAIL;
-
 	*errcode = -ENOBUFS;
-	skb = alloc_skb(header_len, gfp_head);
+	skb = alloc_skb(header_len, gfp_mask);
 	if (!skb)
 		return NULL;
 

[PATCH 4.14 05/63] qmi_wwan: add MTU default to qmap network interface

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniele Palmas <dnlplm@gmail.com>

[ Upstream commit f87118d5760f00af7228033fbe783c7f380d2866 ]

This patch adds MTU default value to qmap network interface in
order to avoid "RTNETLINK answers: No buffer space available"
error when setting an ipv6 address.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/qmi_wwan.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -123,6 +123,7 @@ static void qmimux_setup(struct net_devi
 	dev->addr_len        = 0;
 	dev->flags           = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
 	dev->netdev_ops      = &qmimux_netdev_ops;
+	dev->mtu             = 1500;
 	dev->needs_free_netdev = true;
 }
 

[PATCH 4.14 06/63] r8169: Add support for new Realtek Ethernet

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kai-Heng Feng <kai.heng.feng@canonical.com>

[ Upstream commit 36352991835ce99e46b4441dd0eb6980f9a83e8f ]

There are two new Realtek Ethernet devices which are re-branded r8168h.
Add the IDs to to support them.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/realtek/r8169.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -324,6 +324,8 @@ enum cfg_version {
 };
 
 static const struct pci_device_id rtl8169_pci_tbl[] = {
+	{ PCI_VDEVICE(REALTEK,	0x2502), RTL_CFG_1 },
+	{ PCI_VDEVICE(REALTEK,	0x2600), RTL_CFG_1 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK,	0x8129), 0, 0, RTL_CFG_0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK,	0x8136), 0, 0, RTL_CFG_2 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK,	0x8161), 0, 0, RTL_CFG_1 },

[PATCH 4.14 07/63] ipv6: Take rcu_read_lock in __inet6_bind for mapped addresses

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Ahern <dsahern@gmail.com>

[ Upstream commit d4a7e9bb74b5aaf07b89f6531c080b1130bdf019 ]

I realized the last patch calls dev_get_by_index_rcu in a branch not
holding the rcu lock. Add the calls to rcu_read_lock and rcu_read_unlock.

Fixes: ec90ad334986 ("ipv6: Consider sk_bound_dev_if when binding a socket to a v4 mapped address")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/af_inet6.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -328,17 +328,20 @@ int inet6_bind(struct socket *sock, stru
 			goto out;
 		}
 
+		rcu_read_lock();
 		if (sk->sk_bound_dev_if) {
 			dev = dev_get_by_index_rcu(net, sk->sk_bound_dev_if);
 			if (!dev) {
 				err = -ENODEV;
-				goto out;
+				goto out_unlock;
 			}
 		}
 
 		/* Reproduce AF_INET checks to make the bindings consistent */
 		v4addr = addr->sin6_addr.s6_addr32[3];
 		chk_addr_ret = inet_addr_type_dev_table(net, dev, v4addr);
+		rcu_read_unlock();
+
 		if (!net->ipv4.sysctl_ip_nonlocal_bind &&
 		    !(inet->freebind || inet->transparent) &&
 		    v4addr != htonl(INADDR_ANY) &&

[PATCH 4.14 08/63] net: dsa: mv88x6xxx: mv88e6390 errata

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrew Lunn <andrew@lunn.ch>

[ Upstream commit ea89098ef9a574bceca00d3b5df14aaf0b3f9ccf ]

The 6390 copper ports have an errata which require poking magic values
into undocumented magic registers and then performing a software
reset.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/mv88e6xxx/chip.c |  113 +++++++++++++++++++++++++++++++++++++++
 drivers/net/dsa/mv88e6xxx/chip.h |    5 +
 drivers/net/dsa/mv88e6xxx/port.h |   10 +++
 3 files changed, 128 insertions(+)

--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -1979,6 +1979,107 @@ static int mv88e6xxx_g1_setup(struct mv8
 	return 0;
 }
 
+/* The mv88e6390 has some hidden registers used for debug and
+ * development. The errata also makes use of them.
+ */
+static int mv88e6390_hidden_write(struct mv88e6xxx_chip *chip, int port,
+				  int reg, u16 val)
+{
+	u16 ctrl;
+	int err;
+
+	err = mv88e6xxx_port_write(chip, PORT_RESERVED_1A_DATA_PORT,
+				   PORT_RESERVED_1A, val);
+	if (err)
+		return err;
+
+	ctrl = PORT_RESERVED_1A_BUSY | PORT_RESERVED_1A_WRITE |
+	       PORT_RESERVED_1A_BLOCK | port << PORT_RESERVED_1A_PORT_SHIFT |
+	       reg;
+
+	return mv88e6xxx_port_write(chip, PORT_RESERVED_1A_CTRL_PORT,
+				    PORT_RESERVED_1A, ctrl);
+}
+
+static int mv88e6390_hidden_wait(struct mv88e6xxx_chip *chip)
+{
+	return mv88e6xxx_wait(chip, PORT_RESERVED_1A_CTRL_PORT,
+			      PORT_RESERVED_1A, PORT_RESERVED_1A_BUSY);
+}
+
+
+static int mv88e6390_hidden_read(struct mv88e6xxx_chip *chip, int port,
+				  int reg, u16 *val)
+{
+	u16 ctrl;
+	int err;
+
+	ctrl = PORT_RESERVED_1A_BUSY | PORT_RESERVED_1A_READ |
+	       PORT_RESERVED_1A_BLOCK | port << PORT_RESERVED_1A_PORT_SHIFT |
+	       reg;
+
+	err = mv88e6xxx_port_write(chip, PORT_RESERVED_1A_CTRL_PORT,
+				   PORT_RESERVED_1A, ctrl);
+	if (err)
+		return err;
+
+	err = mv88e6390_hidden_wait(chip);
+	if (err)
+		return err;
+
+	return 	mv88e6xxx_port_read(chip, PORT_RESERVED_1A_DATA_PORT,
+				    PORT_RESERVED_1A, val);
+}
+
+/* Check if the errata has already been applied. */
+static bool mv88e6390_setup_errata_applied(struct mv88e6xxx_chip *chip)
+{
+	int port;
+	int err;
+	u16 val;
+
+	for (port = 0; port < mv88e6xxx_num_ports(chip); port++) {
+		err = mv88e6390_hidden_read(chip, port, 0, &val);
+		if (err) {
+			dev_err(chip->dev,
+				"Error reading hidden register: %d\n", err);
+			return false;
+		}
+		if (val != 0x01c0)
+			return false;
+	}
+
+	return true;
+}
+
+/* The 6390 copper ports have an errata which require poking magic
+ * values into undocumented hidden registers and then performing a
+ * software reset.
+ */
+static int mv88e6390_setup_errata(struct mv88e6xxx_chip *chip)
+{
+	int port;
+	int err;
+
+	if (mv88e6390_setup_errata_applied(chip))
+		return 0;
+
+	/* Set the ports into blocking mode */
+	for (port = 0; port < mv88e6xxx_num_ports(chip); port++) {
+		err = mv88e6xxx_port_set_state(chip, port, BR_STATE_DISABLED);
+		if (err)
+			return err;
+	}
+
+	for (port = 0; port < mv88e6xxx_num_ports(chip); port++) {
+		err = mv88e6390_hidden_write(chip, port, 0, 0x01c0);
+		if (err)
+			return err;
+	}
+
+	return mv88e6xxx_software_reset(chip);
+}
+
 static int mv88e6xxx_setup(struct dsa_switch *ds)
 {
 	struct mv88e6xxx_chip *chip = ds->priv;
@@ -1990,6 +2091,12 @@ static int mv88e6xxx_setup(struct dsa_sw
 
 	mutex_lock(&chip->reg_lock);
 
+	if (chip->info->ops->setup_errata) {
+		err = chip->info->ops->setup_errata(chip);
+		if (err)
+			goto unlock;
+	}
+
 	/* Setup Switch Port Registers */
 	for (i = 0; i < mv88e6xxx_num_ports(chip); i++) {
 		err = mv88e6xxx_setup_port(chip, i);
@@ -2652,6 +2759,7 @@ static const struct mv88e6xxx_ops mv88e6
 
 static const struct mv88e6xxx_ops mv88e6190_ops = {
 	/* MV88E6XXX_FAMILY_6390 */
+	.setup_errata = mv88e6390_setup_errata,
 	.irl_init_all = mv88e6390_g2_irl_init_all,
 	.get_eeprom = mv88e6xxx_g2_get_eeprom8,
 	.set_eeprom = mv88e6xxx_g2_set_eeprom8,
@@ -2687,6 +2795,7 @@ static const struct mv88e6xxx_ops mv88e6
 
 static const struct mv88e6xxx_ops mv88e6190x_ops = {
 	/* MV88E6XXX_FAMILY_6390 */
+	.setup_errata = mv88e6390_setup_errata,
 	.irl_init_all = mv88e6390_g2_irl_init_all,
 	.get_eeprom = mv88e6xxx_g2_get_eeprom8,
 	.set_eeprom = mv88e6xxx_g2_set_eeprom8,
@@ -2722,6 +2831,7 @@ static const struct mv88e6xxx_ops mv88e6
 
 static const struct mv88e6xxx_ops mv88e6191_ops = {
 	/* MV88E6XXX_FAMILY_6390 */
+	.setup_errata = mv88e6390_setup_errata,
 	.irl_init_all = mv88e6390_g2_irl_init_all,
 	.get_eeprom = mv88e6xxx_g2_get_eeprom8,
 	.set_eeprom = mv88e6xxx_g2_set_eeprom8,
@@ -2793,6 +2903,7 @@ static const struct mv88e6xxx_ops mv88e6
 
 static const struct mv88e6xxx_ops mv88e6290_ops = {
 	/* MV88E6XXX_FAMILY_6390 */
+	.setup_errata = mv88e6390_setup_errata,
 	.irl_init_all = mv88e6390_g2_irl_init_all,
 	.get_eeprom = mv88e6xxx_g2_get_eeprom8,
 	.set_eeprom = mv88e6xxx_g2_set_eeprom8,
@@ -3030,6 +3141,7 @@ static const struct mv88e6xxx_ops mv88e6
 
 static const struct mv88e6xxx_ops mv88e6390_ops = {
 	/* MV88E6XXX_FAMILY_6390 */
+	.setup_errata = mv88e6390_setup_errata,
 	.irl_init_all = mv88e6390_g2_irl_init_all,
 	.get_eeprom = mv88e6xxx_g2_get_eeprom8,
 	.set_eeprom = mv88e6xxx_g2_set_eeprom8,
@@ -3068,6 +3180,7 @@ static const struct mv88e6xxx_ops mv88e6
 
 static const struct mv88e6xxx_ops mv88e6390x_ops = {
 	/* MV88E6XXX_FAMILY_6390 */
+	.setup_errata = mv88e6390_setup_errata,
 	.irl_init_all = mv88e6390_g2_irl_init_all,
 	.get_eeprom = mv88e6xxx_g2_get_eeprom8,
 	.set_eeprom = mv88e6xxx_g2_set_eeprom8,
--- a/drivers/net/dsa/mv88e6xxx/chip.h
+++ b/drivers/net/dsa/mv88e6xxx/chip.h
@@ -222,6 +222,11 @@ struct mv88e6xxx_mdio_bus {
 };
 
 struct mv88e6xxx_ops {
+	/* Switch Setup Errata, called early in the switch setup to
+	 * allow any errata actions to be performed
+	 */
+	int (*setup_errata)(struct mv88e6xxx_chip *chip);
+
 	/* Ingress Rate Limit unit (IRL) operations */
 	int (*irl_init_all)(struct mv88e6xxx_chip *chip, int port);
 
--- a/drivers/net/dsa/mv88e6xxx/port.h
+++ b/drivers/net/dsa/mv88e6xxx/port.h
@@ -236,6 +236,16 @@
 /* Offset 0x19: Port IEEE Priority Remapping Registers (4-7) */
 #define MV88E6095_PORT_IEEE_PRIO_REMAP_4567	0x19
 
+/* Offset 0x1a: Magic undocumented errata register */
+#define PORT_RESERVED_1A			0x1a
+#define PORT_RESERVED_1A_BUSY			BIT(15)
+#define PORT_RESERVED_1A_WRITE			BIT(14)
+#define PORT_RESERVED_1A_READ			0
+#define PORT_RESERVED_1A_PORT_SHIFT		5
+#define PORT_RESERVED_1A_BLOCK			(0xf << 10)
+#define PORT_RESERVED_1A_CTRL_PORT		4
+#define PORT_RESERVED_1A_DATA_PORT		5
+
 int mv88e6xxx_port_read(struct mv88e6xxx_chip *chip, int port, int reg,
 			u16 *val);
 int mv88e6xxx_port_write(struct mv88e6xxx_chip *chip, int port, int reg,

[PATCH 4.14 09/63] gpio: pl061: Move irq_chip definition inside struct pl061

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit ed8dce4c6f726b7f3c6bf40859b92a9e32f189c1 ]

Keeping the irq_chip definition static will make it shared with multiple
giochips in the system. This practice is considered to be bad and now we
will get the below warning from gpiolib core:

"detected irqchip that is shared with multiple gpiochips: please fix the
driver."

Hence, move the irq_chip definition from static to `struct pl061` for
using a unique irq_chip for each gpiochip.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpio-pl061.c | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index 6aaaab79c205..f6e1e0e306a3 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -54,6 +54,7 @@ struct pl061 {
 
 	void __iomem		*base;
 	struct gpio_chip	gc;
+	struct irq_chip		irq_chip;
 	int			parent_irq;
 
 #ifdef CONFIG_PM
@@ -281,15 +282,6 @@ static int pl061_irq_set_wake(struct irq_data *d, unsigned int state)
 	return irq_set_irq_wake(pl061->parent_irq, state);
 }
 
-static struct irq_chip pl061_irqchip = {
-	.name		= "pl061",
-	.irq_ack	= pl061_irq_ack,
-	.irq_mask	= pl061_irq_mask,
-	.irq_unmask	= pl061_irq_unmask,
-	.irq_set_type	= pl061_irq_type,
-	.irq_set_wake	= pl061_irq_set_wake,
-};
-
 static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
 {
 	struct device *dev = &adev->dev;
@@ -328,6 +320,13 @@ static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
 	/*
 	 * irq_chip support
 	 */
+	pl061->irq_chip.name = dev_name(dev);
+	pl061->irq_chip.irq_ack	= pl061_irq_ack;
+	pl061->irq_chip.irq_mask = pl061_irq_mask;
+	pl061->irq_chip.irq_unmask = pl061_irq_unmask;
+	pl061->irq_chip.irq_set_type = pl061_irq_type;
+	pl061->irq_chip.irq_set_wake = pl061_irq_set_wake;
+
 	writeb(0, pl061->base + GPIOIE); /* disable irqs */
 	irq = adev->irq[0];
 	if (irq < 0) {
@@ -336,14 +335,14 @@ static int pl061_probe(struct amba_device *adev, const struct amba_id *id)
 	}
 	pl061->parent_irq = irq;
 
-	ret = gpiochip_irqchip_add(&pl061->gc, &pl061_irqchip,
+	ret = gpiochip_irqchip_add(&pl061->gc, &pl061->irq_chip,
 				   0, handle_bad_irq,
 				   IRQ_TYPE_NONE);
 	if (ret) {
 		dev_info(&adev->dev, "could not add irqchip\n");
 		return ret;
 	}
-	gpiochip_set_chained_irqchip(&pl061->gc, &pl061_irqchip,
+	gpiochip_set_chained_irqchip(&pl061->gc, &pl061->irq_chip,
 				     irq, pl061_irq_handler);
 
 	amba_set_drvdata(adev, pl061);
-- 
2.19.1

[PATCH 4.14 10/63] platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 78f3ac76d9e5219589718b9e4733bee21627b3f5 ]

In the past, Asus firmwares would change the panel backlight directly
through the EC when the display off hotkey (Fn+F7) was pressed, and
only notify the OS of such change, with 0x33 when the LCD was ON and
0x34 when the LCD was OFF. These are currently mapped to
KEY_DISPLAYTOGGLE and KEY_DISPLAY_OFF, respectively.

Most recently the EC on Asus most machines lost ability to toggle the
LCD backlight directly, but unless the OS informs the firmware it is
going to handle the display toggle hotkey events, the firmware still
tries change the brightness through the EC, to no effect. The end result
is a long list (at Endless we counted 11) of Asus laptop models where
the display toggle hotkey does not perform any action. Our firmware
engineers contacts at Asus were surprised that there were still machines
out there with the old behavior.

Calling WMNB(ASUS_WMI_DEVID_BACKLIGHT==0x00050011, 2) on the _WDG device
tells the firmware that it should let the OS handle the display toggle
event, in which case it will simply notify the OS of a key press with
0x35, as shown by the DSDT excerpts bellow.

 Scope (_SB)
 {
     (...)

     Device (ATKD)
     {
         (...)

         Name (_WDG, Buffer (0x28)
         {
             /* 0000 */  0xD0, 0x5E, 0x84, 0x97, 0x6D, 0x4E, 0xDE, 0x11,
             /* 0008 */  0x8A, 0x39, 0x08, 0x00, 0x20, 0x0C, 0x9A, 0x66,
             /* 0010 */  0x4E, 0x42, 0x01, 0x02, 0x35, 0xBB, 0x3C, 0x0B,
             /* 0018 */  0xC2, 0xE3, 0xED, 0x45, 0x91, 0xC2, 0x4C, 0x5A,
             /* 0020 */  0x6D, 0x19, 0x5D, 0x1C, 0xFF, 0x00, 0x01, 0x08
         })
         Method (WMNB, 3, Serialized)
         {
             CreateDWordField (Arg2, Zero, IIA0)
             CreateDWordField (Arg2, 0x04, IIA1)
             Local0 = (Arg1 & 0xFFFFFFFF)

             (...)

             If ((Local0 == 0x53564544))
             {
                 (...)

                 If ((IIA0 == 0x00050011))
                 {
                     If ((IIA1 == 0x02))
                     {
                         ^^PCI0.SBRG.EC0.SPIN (0x72, One)
                         ^^PCI0.SBRG.EC0.BLCT = One
                     }

                     Return (One)
                 }
             }
             (...)
         }
         (...)
     }
     (...)
 }
 (...)

 Scope (_SB.PCI0.SBRG.EC0)
 {
     (...)

     Name (BLCT, Zero)

     (...)

     Method (_Q10, 0, NotSerialized)  // _Qxx: EC Query
     {
         If ((BLCT == Zero))
         {
             Local0 = One
             Local0 = RPIN (0x72)
             Local0 ^= One
             SPIN (0x72, Local0)
             If (ATKP)
             {
                 Local0 = (0x34 - Local0)
                 ^^^^ATKD.IANE (Local0)
             }
         }
         ElseIf ((BLCT == One))
         {
             If (ATKP)
             {
                 ^^^^ATKD.IANE (0x35)
             }
         }
     }
     (...)
 }

Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/asus-wmi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index 7440f650e81a..3f662cd774d7 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -2147,7 +2147,8 @@ static int asus_wmi_add(struct platform_device *pdev)
 		err = asus_wmi_backlight_init(asus);
 		if (err && err != -ENODEV)
 			goto fail_backlight;
-	}
+	} else
+		err = asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, 2, NULL);
 
 	status = wmi_install_notify_handler(asus->driver->event_guid,
 					    asus_wmi_notify, asus);
-- 
2.19.1

[PATCH 4.14 11/63] e1000e: allow non-monotonic SYSTIM readings

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit e1f65b0d70e9e5c80e15105cd96fa00174d7c436 ]

It seems with some NICs supported by the e1000e driver a SYSTIM reading
may occasionally be few microseconds before the previous reading and if
enabled also pass e1000e_sanitize_systim() without reaching the maximum
number of rereads, even if the function is modified to check three
consecutive readings (i.e. it doesn't look like a double read error).
This causes an underflow in the timecounter and the PHC time jumps hours
ahead.

This was observed on 82574, I217 and I219. The fastest way to reproduce
it is to run a program that continuously calls the PTP_SYS_OFFSET ioctl
on the PHC.

Modify e1000e_phc_gettime() to use timecounter_cyc2time() instead of
timecounter_read() in order to allow non-monotonic SYSTIM readings and
prevent the PHC from jumping.

Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/e1000e/ptp.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/ptp.c b/drivers/net/ethernet/intel/e1000e/ptp.c
index b366885487a8..cd16b70a4e70 100644
--- a/drivers/net/ethernet/intel/e1000e/ptp.c
+++ b/drivers/net/ethernet/intel/e1000e/ptp.c
@@ -191,10 +191,14 @@ static int e1000e_phc_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
 	struct e1000_adapter *adapter = container_of(ptp, struct e1000_adapter,
 						     ptp_clock_info);
 	unsigned long flags;
-	u64 ns;
+	u64 cycles, ns;
 
 	spin_lock_irqsave(&adapter->systim_lock, flags);
-	ns = timecounter_read(&adapter->tc);
+
+	/* Use timecounter_cyc2time() to allow non-monotonic SYSTIM readings */
+	cycles = adapter->cc.read(&adapter->cc);
+	ns = timecounter_cyc2time(&adapter->tc, cycles);
+
 	spin_unlock_irqrestore(&adapter->systim_lock, flags);
 
 	*ts = ns_to_timespec64(ns);
@@ -250,9 +254,12 @@ static void e1000e_systim_overflow_work(struct work_struct *work)
 						     systim_overflow_work.work);
 	struct e1000_hw *hw = &adapter->hw;
 	struct timespec64 ts;
+	u64 ns;
 
-	adapter->ptp_clock_info.gettime64(&adapter->ptp_clock_info, &ts);
+	/* Update the timecounter */
+	ns = timecounter_read(&adapter->tc);
 
+	ts = ns_to_timespec64(ns);
 	e_dbg("SYSTIM overflow check at %lld.%09lu\n",
 	      (long long) ts.tv_sec, ts.tv_nsec);
 
-- 
2.19.1

[PATCH 4.14 12/63] writeback: dont decrement wb->refcnt if !wb->bdi

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 347a28b586802d09604a149c1a1f6de5dccbe6fa ]

This happened while running in qemu-system-aarch64, the AMBA PL011 UART
driver when enabling CONFIG_DEBUG_TEST_DRIVER_REMOVE.
arch_initcall(pl011_init) came before subsys_initcall(default_bdi_init),
devtmpfs' handle_remove() crashes because the reference count is a NULL
pointer only because wb->bdi hasn't been initialized yet.

Rework so that wb_put have an extra check if wb->bdi before decrement
wb->refcnt and also add a WARN_ON_ONCE to get a warning if it happens again
in other drivers.

Fixes: 52ebea749aae ("writeback: make backing_dev_info host cgroup-specific bdi_writebacks")
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/backing-dev-defs.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/include/linux/backing-dev-defs.h b/include/linux/backing-dev-defs.h
index 3c1beffc861a..19240379637f 100644
--- a/include/linux/backing-dev-defs.h
+++ b/include/linux/backing-dev-defs.h
@@ -233,6 +233,14 @@ static inline void wb_get(struct bdi_writeback *wb)
  */
 static inline void wb_put(struct bdi_writeback *wb)
 {
+	if (WARN_ON_ONCE(!wb->bdi)) {
+		/*
+		 * A driver bug might cause a file to be removed before bdi was
+		 * initialized.
+		 */
+		return;
+	}
+
 	if (wb != &wb->bdi->wb)
 		percpu_ref_put(&wb->refcnt);
 }
-- 
2.19.1

[PATCH 4.14 13/63] serial: set suppress_bind_attrs flag only if builtin

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 646097940ad35aa2c1f2012af932d55976a9f255 ]

When the test 'CONFIG_DEBUG_TEST_DRIVER_REMOVE=y' is enabled,
arch_initcall(pl011_init) came before subsys_initcall(default_bdi_init).
devtmpfs gets killed because we try to remove a file and decrement the
wb reference count before the noop_backing_device_info gets initialized.

[    0.332075] Serial: AMBA PL011 UART driver
[    0.485276] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 39, base_baud = 0) is a PL011 rev1
[    0.502382] console [ttyAMA0] enabled
[    0.515710] Unable to handle kernel paging request at virtual address 0000800074c12000
[    0.516053] Mem abort info:
[    0.516222]   ESR = 0x96000004
[    0.516417]   Exception class = DABT (current EL), IL = 32 bits
[    0.516641]   SET = 0, FnV = 0
[    0.516826]   EA = 0, S1PTW = 0
[    0.516984] Data abort info:
[    0.517149]   ISV = 0, ISS = 0x00000004
[    0.517339]   CM = 0, WnR = 0
[    0.517553] [0000800074c12000] user address but active_mm is swapper
[    0.517928] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    0.518305] Modules linked in:
[    0.518839] CPU: 0 PID: 13 Comm: kdevtmpfs Not tainted 4.19.0-rc5-next-20180928-00002-g2ba39ab0cd01-dirty #82
[    0.519307] Hardware name: linux,dummy-virt (DT)
[    0.519681] pstate: 80000005 (Nzcv daif -PAN -UAO)
[    0.519959] pc : __destroy_inode+0x94/0x2a8
[    0.520212] lr : __destroy_inode+0x78/0x2a8
[    0.520401] sp : ffff0000098c3b20
[    0.520590] x29: ffff0000098c3b20 x28: 00000000087a3714
[    0.520904] x27: 0000000000002000 x26: 0000000000002000
[    0.521179] x25: ffff000009583000 x24: 0000000000000000
[    0.521467] x23: ffff80007bb52000 x22: ffff80007bbaa7c0
[    0.521737] x21: ffff0000093f9338 x20: 0000000000000000
[    0.522033] x19: ffff80007bbb05d8 x18: 0000000000000400
[    0.522376] x17: 0000000000000000 x16: 0000000000000000
[    0.522727] x15: 0000000000000400 x14: 0000000000000400
[    0.523068] x13: 0000000000000001 x12: 0000000000000001
[    0.523421] x11: 0000000000000000 x10: 0000000000000970
[    0.523749] x9 : ffff0000098c3a60 x8 : ffff80007bbab190
[    0.524017] x7 : ffff80007bbaa880 x6 : 0000000000000c88
[    0.524305] x5 : ffff0000093d96c8 x4 : 61c8864680b583eb
[    0.524567] x3 : ffff0000093d6180 x2 : ffffffffffffffff
[    0.524872] x1 : 0000800074c12000 x0 : 0000800074c12000
[    0.525207] Process kdevtmpfs (pid: 13, stack limit = 0x(____ptrval____))
[    0.525529] Call trace:
[    0.525806]  __destroy_inode+0x94/0x2a8
[    0.526108]  destroy_inode+0x34/0x88
[    0.526370]  evict+0x144/0x1c8
[    0.526636]  iput+0x184/0x230
[    0.526871]  dentry_unlink_inode+0x118/0x130
[    0.527152]  d_delete+0xd8/0xe0
[    0.527420]  vfs_unlink+0x240/0x270
[    0.527665]  handle_remove+0x1d8/0x330
[    0.527875]  devtmpfsd+0x138/0x1c8
[    0.528085]  kthread+0x14c/0x158
[    0.528291]  ret_from_fork+0x10/0x18
[    0.528720] Code: 92800002 aa1403e0 d538d081 8b010000 (c85f7c04)
[    0.529367] ---[ end trace 5a3dee47727f877c ]---

Rework to set suppress_bind_attrs flag to avoid removing the device when
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y. This applies for pic32_uart and
xilinx_uartps as well.

Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/amba-pl011.c    | 2 ++
 drivers/tty/serial/pic32_uart.c    | 1 +
 drivers/tty/serial/xilinx_uartps.c | 1 +
 3 files changed, 4 insertions(+)

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index c9f701aca677..4a4a9f33715c 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2800,6 +2800,7 @@ static struct platform_driver arm_sbsa_uart_platform_driver = {
 		.name	= "sbsa-uart",
 		.of_match_table = of_match_ptr(sbsa_uart_of_match),
 		.acpi_match_table = ACPI_PTR(sbsa_uart_acpi_match),
+		.suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_AMBA_PL011),
 	},
 };
 
@@ -2828,6 +2829,7 @@ static struct amba_driver pl011_driver = {
 	.drv = {
 		.name	= "uart-pl011",
 		.pm	= &pl011_dev_pm_ops,
+		.suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_AMBA_PL011),
 	},
 	.id_table	= pl011_ids,
 	.probe		= pl011_probe,
diff --git a/drivers/tty/serial/pic32_uart.c b/drivers/tty/serial/pic32_uart.c
index 00a33eb859d3..e3d7d9d6c599 100644
--- a/drivers/tty/serial/pic32_uart.c
+++ b/drivers/tty/serial/pic32_uart.c
@@ -920,6 +920,7 @@ static struct platform_driver pic32_uart_platform_driver = {
 	.driver		= {
 		.name	= PIC32_DEV_NAME,
 		.of_match_table	= of_match_ptr(pic32_serial_dt_ids),
+		.suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_PIC32),
 	},
 };
 
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 897b1c515d00..217686cb4cd3 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1644,6 +1644,7 @@ static struct platform_driver cdns_uart_platform_driver = {
 		.name = CDNS_UART_NAME,
 		.of_match_table = cdns_uart_of_match,
 		.pm = &cdns_uart_dev_pm_ops,
+		.suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_XILINX_PS_UART),
 		},
 };
 
-- 
2.19.1

[PATCH 4.14 14/63] ALSA: oxfw: add support for APOGEE duet FireWire

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit fba43f454cdf9caa3185219d116bd2a6e6354552 ]

This commit adds support for APOGEE duet FireWire, launched 2007, already
discontinued. This model uses Oxford Semiconductor FW971 as its
communication engine. Below is information on Configuration ROM of this
unit. The unit supports some AV/C commands defined by Audio subunit
specification and vendor dependent commands.

$ ./hinawa-config-rom-printer /dev/fw1
{ 'bus-info': { 'adj': False,
                'bmc': False,
                'chip_ID': 42949742248,
                'cmc': False,
                'cyc_clk_acc': 255,
                'generation': 0,
                'imc': False,
                'isc': True,
                'link_spd': 3,
                'max_ROM': 0,
                'max_rec': 64,
                'name': '1394',
                'node_vendor_ID': 987,
                'pmc': False},
  'root-directory': [ ['VENDOR', 987],
                      ['DESCRIPTOR', 'Apogee Electronics'],
                      ['MODEL', 122333],
                      ['DESCRIPTOR', 'Duet'],
                      [ 'NODE_CAPABILITIES',
                        { 'addressing': {'64': True, 'fix': True, 'prv': False},
                          'misc': {'int': False, 'ms': False, 'spt': True},
                          'state': { 'atn': False,
                                     'ded': False,
                                     'drq': True,
                                     'elo': False,
                                     'init': False,
                                     'lst': True,
                                     'off': False},
                          'testing': {'bas': False, 'ext': False}}],
                      [ 'UNIT',
                        [ ['SPECIFIER_ID', 41005],
                          ['VERSION', 65537],
                          ['MODEL', 122333],
                          ['DESCRIPTOR', 'Duet']]]]}

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/firewire/Kconfig     | 1 +
 sound/firewire/oxfw/oxfw.c | 8 ++++++++
 2 files changed, 9 insertions(+)

diff --git a/sound/firewire/Kconfig b/sound/firewire/Kconfig
index 529d9f405fa9..0cb65d0864cc 100644
--- a/sound/firewire/Kconfig
+++ b/sound/firewire/Kconfig
@@ -41,6 +41,7 @@ config SND_OXFW
 	   * Mackie(Loud) U.420/U.420d
 	   * TASCAM FireOne
 	   * Stanton Controllers & Systems 1 Deck/Mixer
+	   * APOGEE duet FireWire
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called snd-oxfw.
diff --git a/sound/firewire/oxfw/oxfw.c b/sound/firewire/oxfw/oxfw.c
index a315d5b6b86b..1554dc98e092 100644
--- a/sound/firewire/oxfw/oxfw.c
+++ b/sound/firewire/oxfw/oxfw.c
@@ -20,6 +20,7 @@
 #define VENDOR_LACIE		0x00d04b
 #define VENDOR_TASCAM		0x00022e
 #define OUI_STANTON		0x001260
+#define OUI_APOGEE		0x0003db
 
 #define MODEL_SATELLITE		0x00200f
 
@@ -442,6 +443,13 @@ static const struct ieee1394_device_id oxfw_id_table[] = {
 		.vendor_id	= OUI_STANTON,
 		.model_id	= 0x002000,
 	},
+	// APOGEE, duet FireWire
+	{
+		.match_flags	= IEEE1394_MATCH_VENDOR_ID |
+				  IEEE1394_MATCH_MODEL_ID,
+		.vendor_id	= OUI_APOGEE,
+		.model_id	= 0x01dddd,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(ieee1394, oxfw_id_table);
-- 
2.19.1

[PATCH 4.14 15/63] x86/mce: Fix -Wmissing-prototypes warnings

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 68b5e4326e4b8ac9080835005d8254fed0fb3c56 ]

Add the proper includes and make smca_get_name() static.

Fix an actual bug too which the warning triggered:

  arch/x86/kernel/cpu/mcheck/therm_throt.c:395:39: error: conflicting \
  types for ‘smp_thermal_interrupt’
   asmlinkage __visible void __irq_entry smp_thermal_interrupt(struct pt_regs *r)
                                         ^~~~~~~~~~~~~~~~~~~~~
  In file included from arch/x86/kernel/cpu/mcheck/therm_throt.c:29:
  ./arch/x86/include/asm/traps.h:107:17: note: previous declaration of \
	  ‘smp_thermal_interrupt’ was here
   asmlinkage void smp_thermal_interrupt(void);

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Yi Wang <wang.yi59@zte.com.cn>
Cc: Michael Matz <matz@suse.de>
Cc: x86@kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1811081633160.1549@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/traps.h             | 6 +++---
 arch/x86/kernel/cpu/mcheck/mce_amd.c     | 5 +++--
 arch/x86/kernel/cpu/mcheck/therm_throt.c | 3 ++-
 arch/x86/kernel/cpu/mcheck/threshold.c   | 3 ++-
 4 files changed, 10 insertions(+), 7 deletions(-)

diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h
index 3de69330e6c5..afbc87206886 100644
--- a/arch/x86/include/asm/traps.h
+++ b/arch/x86/include/asm/traps.h
@@ -104,9 +104,9 @@ extern int panic_on_unrecovered_nmi;
 
 void math_emulate(struct math_emu_info *);
 #ifndef CONFIG_X86_32
-asmlinkage void smp_thermal_interrupt(void);
-asmlinkage void smp_threshold_interrupt(void);
-asmlinkage void smp_deferred_error_interrupt(void);
+asmlinkage void smp_thermal_interrupt(struct pt_regs *regs);
+asmlinkage void smp_threshold_interrupt(struct pt_regs *regs);
+asmlinkage void smp_deferred_error_interrupt(struct pt_regs *regs);
 #endif
 
 extern void ist_enter(struct pt_regs *regs);
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index beec0daecbc5..4fa97a44e73f 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -23,6 +23,7 @@
 #include <linux/string.h>
 
 #include <asm/amd_nb.h>
+#include <asm/traps.h>
 #include <asm/apic.h>
 #include <asm/mce.h>
 #include <asm/msr.h>
@@ -99,7 +100,7 @@ static u32 smca_bank_addrs[MAX_NR_BANKS][NR_BLOCKS] __ro_after_init =
 	[0 ... MAX_NR_BANKS - 1] = { [0 ... NR_BLOCKS - 1] = -1 }
 };
 
-const char *smca_get_name(enum smca_bank_types t)
+static const char *smca_get_name(enum smca_bank_types t)
 {
 	if (t >= N_SMCA_BANK_TYPES)
 		return NULL;
@@ -823,7 +824,7 @@ static void __log_error(unsigned int bank, u64 status, u64 addr, u64 misc)
 	mce_log(&m);
 }
 
-asmlinkage __visible void __irq_entry smp_deferred_error_interrupt(void)
+asmlinkage __visible void __irq_entry smp_deferred_error_interrupt(struct pt_regs *regs)
 {
 	entering_irq();
 	trace_deferred_error_apic_entry(DEFERRED_ERROR_VECTOR);
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 2da67b70ba98..ee229ceee745 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -25,6 +25,7 @@
 #include <linux/cpu.h>
 
 #include <asm/processor.h>
+#include <asm/traps.h>
 #include <asm/apic.h>
 #include <asm/mce.h>
 #include <asm/msr.h>
@@ -390,7 +391,7 @@ static void unexpected_thermal_interrupt(void)
 
 static void (*smp_thermal_vector)(void) = unexpected_thermal_interrupt;
 
-asmlinkage __visible void __irq_entry smp_thermal_interrupt(struct pt_regs *r)
+asmlinkage __visible void __irq_entry smp_thermal_interrupt(struct pt_regs *regs)
 {
 	entering_irq();
 	trace_thermal_apic_entry(THERMAL_APIC_VECTOR);
diff --git a/arch/x86/kernel/cpu/mcheck/threshold.c b/arch/x86/kernel/cpu/mcheck/threshold.c
index 2b584b319eff..c21e0a1efd0f 100644
--- a/arch/x86/kernel/cpu/mcheck/threshold.c
+++ b/arch/x86/kernel/cpu/mcheck/threshold.c
@@ -6,6 +6,7 @@
 #include <linux/kernel.h>
 
 #include <asm/irq_vectors.h>
+#include <asm/traps.h>
 #include <asm/apic.h>
 #include <asm/mce.h>
 #include <asm/trace/irq_vectors.h>
@@ -18,7 +19,7 @@ static void default_threshold_interrupt(void)
 
 void (*mce_threshold_vector)(void) = default_threshold_interrupt;
 
-asmlinkage __visible void __irq_entry smp_threshold_interrupt(void)
+asmlinkage __visible void __irq_entry smp_threshold_interrupt(struct pt_regs *regs)
 {
 	entering_irq();
 	trace_threshold_apic_entry(THRESHOLD_APIC_VECTOR);
-- 
2.19.1

[PATCH 4.14 16/63] MIPS: SiByte: Enable swiotlb for SWARM, LittleSur and BigSur

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit e4849aff1e169b86c561738daf8ff020e9de1011 ]

The Broadcom SiByte BCM1250, BCM1125, and BCM1125H SOCs have an onchip
DRAM controller that supports memory amounts of up to 16GiB, and due to
how the address decoder has been wired in the SOC any memory beyond 1GiB
is actually mapped starting from 4GiB physical up, that is beyond the
32-bit addressable limit[1].  Consequently if the maximum amount of
memory has been installed, then it will span up to 19GiB.

Many of the evaluation boards we support that are based on one of these
SOCs have their memory soldered and the amount present fits in the
32-bit address range.  The BCM91250A SWARM board however has actual DIMM
slots and accepts, depending on the peripherals revision of the SOC, up
to 4GiB or 8GiB of memory in commercially available JEDEC modules[2].
I believe this is also the case with the BCM91250C2 LittleSur board.
This means that up to either 3GiB or 7GiB of memory requires 64-bit
addressing to access.

I believe the BCM91480B BigSur board, which has the BCM1480 SOC instead,
accepts at least as much memory, although I have no documentation or
actual hardware available to verify that.

Both systems have PCI slots installed for use by any PCI option boards,
including ones that only support 32-bit addressing (additionally the
32-bit PCI host bridge of the BCM1250, BCM1125, and BCM1125H SOCs limits
addressing to 32-bits), and there is no IOMMU available.  Therefore for
PCI DMA to work in the presence of memory beyond enable swiotlb for the
affected systems.

All the other SOC onchip DMA devices use 40-bit addressing and therefore
can address the whole memory, so only enable swiotlb if PCI support and
support for DMA beyond 4GiB have been both enabled in the configuration
of the kernel.

This shows up as follows:

Broadcom SiByte BCM1250 B2 @ 800 MHz (SB1 rev 2)
Board type: SiByte BCM91250A (SWARM)
Determined physical RAM map:
 memory: 000000000fe7fe00 @ 0000000000000000 (usable)
 memory: 000000001ffffe00 @ 0000000080000000 (usable)
 memory: 000000000ffffe00 @ 00000000c0000000 (usable)
 memory: 0000000087fffe00 @ 0000000100000000 (usable)
software IO TLB: mapped [mem 0xcbffc000-0xcfffc000] (64MB)

in the bootstrap log and removes failures like these:

defxx 0000:02:00.0: dma_direct_map_page: overflow 0x0000000185bc6080+4608 of device mask ffffffff bus mask 0
fddi0: Receive buffer allocation failed
fddi0: Adapter open failed!
IP-Config: Failed to open fddi0
defxx 0000:09:08.0: dma_direct_map_page: overflow 0x0000000185bc6080+4608 of device mask ffffffff bus mask 0
fddi1: Receive buffer allocation failed
fddi1: Adapter open failed!
IP-Config: Failed to open fddi1

when memory beyond 4GiB is handed out to devices that can only do 32-bit
addressing.

This updates commit cce335ae47e2 ("[MIPS] 64-bit Sibyte kernels need
DMA32.").

References:

[1] "BCM1250/BCM1125/BCM1125H User Manual", Revision 1250_1125-UM100-R,
    Broadcom Corporation, 21 Oct 2002, Section 3: "System Overview",
    "Memory Map", pp. 34-38

[2] "BCM91250A User Manual", Revision 91250A-UM100-R, Broadcom
    Corporation, 18 May 2004, Section 3: "Physical Description",
    "Supported DRAM", p. 23

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
[paul.burton@mips.com: Remove GPL text from dma.c; SPDX tag covers it]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Patchwork: https://patchwork.linux-mips.org/patch/21108/
References: cce335ae47e2 ("[MIPS] 64-bit Sibyte kernels need DMA32.")
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/Kconfig                |  3 +++
 arch/mips/sibyte/common/Makefile |  1 +
 arch/mips/sibyte/common/dma.c    | 14 ++++++++++++++
 3 files changed, 18 insertions(+)
 create mode 100644 arch/mips/sibyte/common/dma.c

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index ae4450e891ab..8d4470f44b74 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -800,6 +800,7 @@ config SIBYTE_SWARM
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select ZONE_DMA32 if 64BIT
+	select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI
 
 config SIBYTE_LITTLESUR
 	bool "Sibyte BCM91250C2-LittleSur"
@@ -822,6 +823,7 @@ config SIBYTE_SENTOSA
 	select SYS_HAS_CPU_SB1
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI
 
 config SIBYTE_BIGSUR
 	bool "Sibyte BCM91480B-BigSur"
@@ -835,6 +837,7 @@ config SIBYTE_BIGSUR
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select ZONE_DMA32 if 64BIT
+	select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI
 
 config SNI_RM
 	bool "SNI RM200/300/400"
diff --git a/arch/mips/sibyte/common/Makefile b/arch/mips/sibyte/common/Makefile
index b3d6bf23a662..3ef3fb658136 100644
--- a/arch/mips/sibyte/common/Makefile
+++ b/arch/mips/sibyte/common/Makefile
@@ -1,4 +1,5 @@
 obj-y := cfe.o
+obj-$(CONFIG_SWIOTLB)			+= dma.o
 obj-$(CONFIG_SIBYTE_BUS_WATCHER)	+= bus_watcher.o
 obj-$(CONFIG_SIBYTE_CFE_CONSOLE)	+= cfe_console.o
 obj-$(CONFIG_SIBYTE_TBPROF)		+= sb_tbprof.o
diff --git a/arch/mips/sibyte/common/dma.c b/arch/mips/sibyte/common/dma.c
new file mode 100644
index 000000000000..eb47a94f3583
--- /dev/null
+++ b/arch/mips/sibyte/common/dma.c
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ *	DMA support for Broadcom SiByte platforms.
+ *
+ *	Copyright (c) 2018  Maciej W. Rozycki
+ */
+
+#include <linux/swiotlb.h>
+#include <asm/bootinfo.h>
+
+void __init plat_swiotlb_setup(void)
+{
+	swiotlb_init(1);
+}
-- 
2.19.1

[PATCH 4.14 17/63] arm64: perf: set suppress_bind_attrs flag to true

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 81e9fa8bab381f8b6eb04df7cdf0f71994099bd4 ]

The armv8_pmuv3 driver doesn't have a remove function, and when the test
'CONFIG_DEBUG_TEST_DRIVER_REMOVE=y' is enabled, the following Call trace
can be seen.

[    1.424287] Failed to register pmu: armv8_pmuv3, reason -17
[    1.424870] WARNING: CPU: 0 PID: 1 at ../kernel/events/core.c:11771 perf_event_sysfs_init+0x98/0xdc
[    1.425220] Modules linked in:
[    1.425531] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G        W         4.19.0-rc7-next-20181012-00003-ge7a97b1ad77b-dirty #35
[    1.425951] Hardware name: linux,dummy-virt (DT)
[    1.426212] pstate: 80000005 (Nzcv daif -PAN -UAO)
[    1.426458] pc : perf_event_sysfs_init+0x98/0xdc
[    1.426720] lr : perf_event_sysfs_init+0x98/0xdc
[    1.426908] sp : ffff00000804bd50
[    1.427077] x29: ffff00000804bd50 x28: ffff00000934e078
[    1.427429] x27: ffff000009546000 x26: 0000000000000007
[    1.427757] x25: ffff000009280710 x24: 00000000ffffffef
[    1.428086] x23: ffff000009408000 x22: 0000000000000000
[    1.428415] x21: ffff000009136008 x20: ffff000009408730
[    1.428744] x19: ffff80007b20b400 x18: 000000000000000a
[    1.429075] x17: 0000000000000000 x16: 0000000000000000
[    1.429418] x15: 0000000000000400 x14: 2e79726f74636572
[    1.429748] x13: 696420656d617320 x12: 656874206e692065
[    1.430060] x11: 6d616e20656d6173 x10: 2065687420687469
[    1.430335] x9 : ffff00000804bd50 x8 : 206e6f7361657220
[    1.430610] x7 : 2c3376756d705f38 x6 : ffff00000954d7ce
[    1.430880] x5 : 0000000000000000 x4 : 0000000000000000
[    1.431226] x3 : 0000000000000000 x2 : ffffffffffffffff
[    1.431554] x1 : 4d151327adc50b00 x0 : 0000000000000000
[    1.431868] Call trace:
[    1.432102]  perf_event_sysfs_init+0x98/0xdc
[    1.432382]  do_one_initcall+0x6c/0x1a8
[    1.432637]  kernel_init_freeable+0x1bc/0x280
[    1.432905]  kernel_init+0x18/0x160
[    1.433115]  ret_from_fork+0x10/0x18
[    1.433297] ---[ end trace 27fd415390eb9883 ]---

Rework to set suppress_bind_attrs flag to avoid removing the device when
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y, since there's no real reason to
remove the armv8_pmuv3 driver.

Cc: Arnd Bergmann <arnd@arndb.de>
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/perf_event.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
index 86249a24592d..05fdae70e9f6 100644
--- a/arch/arm64/kernel/perf_event.c
+++ b/arch/arm64/kernel/perf_event.c
@@ -1130,6 +1130,7 @@ static struct platform_driver armv8_pmu_driver = {
 	.driver		= {
 		.name	= ARMV8_PMU_PDEV_NAME,
 		.of_match_table = armv8_pmu_of_device_ids,
+		.suppress_bind_attrs = true,
 	},
 	.probe		= armv8_pmu_device_probe,
 };
-- 
2.19.1

[PATCH 4.14 18/63] usb: gadget: udc: renesas_usb3: add a safety connection way for forced_b_device

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit ceb94bc52c437463f0903e61060a94a2226fb672 ]

This patch adds a safety connection way for "forced_b_device" with
"workaround_for_vbus" like below:

< Example for R-Car E3 Ebisu >
 # modprobe <any usb gadget driver>
 # echo 1 > /sys/kernel/debug/ee020000.usb/b_device
 (connect a usb cable to host side.)
 # echo 2 > /sys/kernel/debug/ee020000.usb/b_device

Previous code should have connected a usb cable before the "b_device"
is set to 1 on the Ebisu board. However, if xHCI driver on the board
is probed, it causes some troubles:
 - Conflicts USB VBUS/signals between the board and another host.
 - "Cannot enable. Maybe the USB cable is bad?" might happen on
   both the board and another host with a usb hub.
 - Cannot enumerate a usb gadget correctly because an interruption
   of VBUS change happens unexpectedly.

Reported-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/renesas_usb3.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c
index ade0723787e5..e5355ede2c46 100644
--- a/drivers/usb/gadget/udc/renesas_usb3.c
+++ b/drivers/usb/gadget/udc/renesas_usb3.c
@@ -352,6 +352,7 @@ struct renesas_usb3 {
 	bool extcon_host;		/* check id and set EXTCON_USB_HOST */
 	bool extcon_usb;		/* check vbus and set EXTCON_USB */
 	bool forced_b_device;
+	bool start_to_connect;
 };
 
 #define gadget_to_renesas_usb3(_gadget)	\
@@ -470,7 +471,8 @@ static void usb3_init_axi_bridge(struct renesas_usb3 *usb3)
 static void usb3_init_epc_registers(struct renesas_usb3 *usb3)
 {
 	usb3_write(usb3, ~0, USB3_USB_INT_STA_1);
-	usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG);
+	if (!usb3->workaround_for_vbus)
+		usb3_enable_irq_1(usb3, USB_INT_1_VBUS_CNG);
 }
 
 static bool usb3_wakeup_usb2_phy(struct renesas_usb3 *usb3)
@@ -676,8 +678,7 @@ static void usb3_mode_config(struct renesas_usb3 *usb3, bool host, bool a_dev)
 	usb3_set_mode(usb3, host);
 	usb3_vbus_out(usb3, a_dev);
 	/* for A-Peripheral or forced B-device mode */
-	if ((!host && a_dev) ||
-	    (usb3->workaround_for_vbus && usb3->forced_b_device))
+	if ((!host && a_dev) || usb3->start_to_connect)
 		usb3_connect(usb3);
 	spin_unlock_irqrestore(&usb3->lock, flags);
 }
@@ -2369,7 +2370,11 @@ static ssize_t renesas_usb3_b_device_write(struct file *file,
 	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
 		return -EFAULT;
 
-	if (!strncmp(buf, "1", 1))
+	usb3->start_to_connect = false;
+	if (usb3->workaround_for_vbus && usb3->forced_b_device &&
+	    !strncmp(buf, "2", 1))
+		usb3->start_to_connect = true;
+	else if (!strncmp(buf, "1", 1))
 		usb3->forced_b_device = true;
 	else
 		usb3->forced_b_device = false;
@@ -2377,7 +2382,7 @@ static ssize_t renesas_usb3_b_device_write(struct file *file,
 	if (usb3->workaround_for_vbus)
 		usb3_disconnect(usb3);
 
-	/* Let this driver call usb3_connect() anyway */
+	/* Let this driver call usb3_connect() if needed */
 	usb3_check_id(usb3);
 
 	return count;
-- 
2.19.1

[PATCH 4.14 19/63] selinux: always allow mounting submounts

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 2cbdcb882f97a45f7475c67ac6257bbc16277dfe ]

If a superblock has the MS_SUBMOUNT flag set, we should always allow
mounting it. These mounts are done automatically by the kernel either as
part of mounting some parent mount (e.g. debugfs always mounts tracefs
under "tracing" for compatibility) or they are mounted automatically as
needed on subdirectory accesses (e.g. NFS crossmnt mounts). Since such
automounts are either an implicit consequence of the parent mount (which
is already checked) or they can happen during regular accesses (where it
doesn't make sense to check against the current task's context), the
mount permission check should be skipped for them.

Without this patch, attempts to access contents of an automounted
directory can cause unexpected SELinux denials.

In the current kernel tree, the MS_SUBMOUNT flag is set only via
vfs_submount(), which is called only from the following places:
 - AFS, when automounting special "symlinks" referencing other cells
 - CIFS, when automounting "referrals"
 - NFS, when automounting subtrees
 - debugfs, when automounting tracefs

In all cases the submounts are meant to be transparent to the user and
it makes sense that if mounting the master is allowed, then so should be
the automounts. Note that CAP_SYS_ADMIN capability checking is already
skipped for (SB_KERNMOUNT|SB_SUBMOUNT) in:
 - sget_userns() in fs/super.c:
	if (!(flags & (SB_KERNMOUNT|SB_SUBMOUNT)) &&
	    !(type->fs_flags & FS_USERNS_MOUNT) &&
	    !capable(CAP_SYS_ADMIN))
		return ERR_PTR(-EPERM);
 - sget() in fs/super.c:
        /* Ensure the requestor has permissions over the target filesystem */
        if (!(flags & (SB_KERNMOUNT|SB_SUBMOUNT)) && !ns_capable(user_ns, CAP_SYS_ADMIN))
                return ERR_PTR(-EPERM);

Verified internally on patched RHEL 7.6 with a reproducer using
NFS+httpd and selinux-tesuite.

Fixes: 93faccbbfa95 ("fs: Better permission checking for submounts")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/selinux/hooks.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index f5d304736852..d6b9ed34ceae 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -2820,7 +2820,7 @@ static int selinux_sb_kern_mount(struct super_block *sb, int flags, void *data)
 		return rc;
 
 	/* Allow all mounts performed by the kernel */
-	if (flags & MS_KERNMOUNT)
+	if (flags & (MS_KERNMOUNT | MS_SUBMOUNT))
 		return 0;
 
 	ad.type = LSM_AUDIT_DATA_DENTRY;
-- 
2.19.1

[PATCH 4.14 20/63] rxe: IB_WR_REG_MR does not capture MRs iova field

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit b024dd0eba6e6d568f69d63c5e3153aba94c23e3 ]

FRWR memory registration is done with a series of calls and WRs.
1. ULP invokes ib_dma_map_sg()
2. ULP invokes ib_map_mr_sg()
3. ULP posts an IB_WR_REG_MR on the Send queue

Step 2 generates an iova. It is permissible for ULPs to change this
iova (with certain restrictions) between steps 2 and 3.

rxe_map_mr_sg captures the MR's iova but later when rxe processes the
REG_MR WR, it ignores the MR's iova field. If a ULP alters the MR's iova
after step 2 but before step 3, rxe never captures that change.

When the remote sends an RDMA Read targeting that MR, rxe looks up the
R_key, but the altered iova does not match the iova stored in the MR,
causing the RDMA Read request to fail.

Reported-by: Anna Schumaker <schumaker.anna@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/rxe/rxe_req.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/sw/rxe/rxe_req.c b/drivers/infiniband/sw/rxe/rxe_req.c
index de853bcc2384..08ae4f3a6a37 100644
--- a/drivers/infiniband/sw/rxe/rxe_req.c
+++ b/drivers/infiniband/sw/rxe/rxe_req.c
@@ -640,6 +640,7 @@ next_wqe:
 			rmr->access = wqe->wr.wr.reg.access;
 			rmr->lkey = wqe->wr.wr.reg.key;
 			rmr->rkey = wqe->wr.wr.reg.key;
+			rmr->iova = wqe->wr.wr.reg.mr->iova;
 			wqe->state = wqe_state_done;
 			wqe->status = IB_WC_SUCCESS;
 		} else {
-- 
2.19.1

[PATCH 4.14 21/63] jffs2: Fix use of uninitialized delayed_work, lockdep breakage

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit a788c5272769ddbcdbab297cf386413eeac04463 ]

jffs2_sync_fs makes the assumption that if CONFIG_JFFS2_FS_WRITEBUFFER
is defined then a write buffer is available and has been initialized.
However, this does is not the case when the mtd device has no
out-of-band buffer:

int jffs2_nand_flash_setup(struct jffs2_sb_info *c)
{
        if (!c->mtd->oobsize)
                return 0;
...

The resulting call to cancel_delayed_work_sync passing a uninitialized
(but zeroed) delayed_work struct forces lockdep to become disabled.

[   90.050639] overlayfs: upper fs does not support tmpfile.
[   90.652264] INFO: trying to register non-static key.
[   90.662171] the code is fine but needs lockdep annotation.
[   90.673090] turning off the locking correctness validator.
[   90.684021] CPU: 0 PID: 1762 Comm: mount_root Not tainted 4.14.63 #0
[   90.696672] Stack : 00000000 00000000 80d8f6a2 00000038 805f0000 80444600 8fe364f4 805dfbe7
[   90.713349]         80563a30 000006e2 8068370c 00000001 00000000 00000001 8e2fdc48 ffffffff
[   90.730020]         00000000 00000000 80d90000 00000000 00000106 00000000 6465746e 312e3420
[   90.746690]         6b636f6c 03bf0000 f8000000 20676e69 00000000 80000000 00000000 8e2c2a90
[   90.763362]         80d90000 00000001 00000000 8e2c2a90 00000003 80260dc0 08052098 80680000
[   90.780033]         ...
[   90.784902] Call Trace:
[   90.789793] [<8000f0d8>] show_stack+0xb8/0x148
[   90.798659] [<8005a000>] register_lock_class+0x270/0x55c
[   90.809247] [<8005cb64>] __lock_acquire+0x13c/0xf7c
[   90.818964] [<8005e314>] lock_acquire+0x194/0x1dc
[   90.828345] [<8003f27c>] flush_work+0x200/0x24c
[   90.837374] [<80041dfc>] __cancel_work_timer+0x158/0x210
[   90.847958] [<801a8770>] jffs2_sync_fs+0x20/0x54
[   90.857173] [<80125cf4>] iterate_supers+0xf4/0x120
[   90.866729] [<80158fc4>] sys_sync+0x44/0x9c
[   90.875067] [<80014424>] syscall_common+0x34/0x58

Signed-off-by: Daniel Santos <daniel.santos@pobox.com>
Reviewed-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/jffs2/super.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index bc00cc385b77..83340496645b 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -101,7 +101,8 @@ static int jffs2_sync_fs(struct super_block *sb, int wait)
 	struct jffs2_sb_info *c = JFFS2_SB_INFO(sb);
 
 #ifdef CONFIG_JFFS2_FS_WRITEBUFFER
-	cancel_delayed_work_sync(&c->wbuf_dwork);
+	if (jffs2_is_writebuffered(c))
+		cancel_delayed_work_sync(&c->wbuf_dwork);
 #endif
 
 	mutex_lock(&c->alloc_sem);
-- 
2.19.1

[PATCH 4.14 22/63] clk: imx: make mux parent strings const

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 9e5ef7a57ca75a1b9411c46caeeb6881124284a3 ]

As the commit 2893c379461a ("clk: make strings in parent name arrays
const"), let's make the parent strings const, otherwise we may meet
the following warning when compiling:

drivers/clk/imx/clk-imx7ulp.c: In function 'imx7ulp_clocks_init':
drivers/clk/imx/clk-imx7ulp.c:73:35: warning: passing argument 5 of
	'imx_clk_mux_flags' discards 'const' qualifier from pointer target type

  clks[IMX7ULP_CLK_APLL_PRE_SEL] = imx_clk_mux_flags("apll_pre_sel", base + 0x508, 0,
	1, pll_pre_sels, ARRAY_SIZE(pll_pre_sels), CLK_SET_PARENT_GATE);
                                   ^
In file included from drivers/clk/imx/clk-imx7ulp.c:23:0:
drivers/clk/imx/clk.h:200:27: note: expected 'const char **' but argument is
 of type 'const char * const*'
...

Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/imx/clk-busy.c      |  2 +-
 drivers/clk/imx/clk-fixup-mux.c |  2 +-
 drivers/clk/imx/clk.h           | 18 +++++++++++-------
 3 files changed, 13 insertions(+), 9 deletions(-)

diff --git a/drivers/clk/imx/clk-busy.c b/drivers/clk/imx/clk-busy.c
index 5cc99590f9a3..097625c5715c 100644
--- a/drivers/clk/imx/clk-busy.c
+++ b/drivers/clk/imx/clk-busy.c
@@ -154,7 +154,7 @@ static struct clk_ops clk_busy_mux_ops = {
 
 struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
 			     u8 width, void __iomem *busy_reg, u8 busy_shift,
-			     const char **parent_names, int num_parents)
+			     const char * const *parent_names, int num_parents)
 {
 	struct clk_busy_mux *busy;
 	struct clk *clk;
diff --git a/drivers/clk/imx/clk-fixup-mux.c b/drivers/clk/imx/clk-fixup-mux.c
index c9b327e0a8dd..44817c1b0b88 100644
--- a/drivers/clk/imx/clk-fixup-mux.c
+++ b/drivers/clk/imx/clk-fixup-mux.c
@@ -70,7 +70,7 @@ static const struct clk_ops clk_fixup_mux_ops = {
 };
 
 struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg,
-			      u8 shift, u8 width, const char **parents,
+			      u8 shift, u8 width, const char * const *parents,
 			      int num_parents, void (*fixup)(u32 *val))
 {
 	struct clk_fixup_mux *fixup_mux;
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index d69c4bbf3597..b03fbd502528 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -63,14 +63,14 @@ struct clk *imx_clk_busy_divider(const char *name, const char *parent_name,
 
 struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
 			     u8 width, void __iomem *busy_reg, u8 busy_shift,
-			     const char **parent_names, int num_parents);
+			     const char * const *parent_names, int num_parents);
 
 struct clk *imx_clk_fixup_divider(const char *name, const char *parent,
 				  void __iomem *reg, u8 shift, u8 width,
 				  void (*fixup)(u32 *val));
 
 struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg,
-			      u8 shift, u8 width, const char **parents,
+			      u8 shift, u8 width, const char * const *parents,
 			      int num_parents, void (*fixup)(u32 *val));
 
 static inline struct clk *imx_clk_fixed(const char *name, int rate)
@@ -79,7 +79,8 @@ static inline struct clk *imx_clk_fixed(const char *name, int rate)
 }
 
 static inline struct clk *imx_clk_mux_ldb(const char *name, void __iomem *reg,
-		u8 shift, u8 width, const char **parents, int num_parents)
+			u8 shift, u8 width, const char * const *parents,
+			int num_parents)
 {
 	return clk_register_mux(NULL, name, parents, num_parents,
 			CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT, reg,
@@ -178,7 +179,8 @@ static inline struct clk *imx_clk_gate4(const char *name, const char *parent,
 }
 
 static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
-		u8 shift, u8 width, const char **parents, int num_parents)
+			u8 shift, u8 width, const char * const *parents,
+			int num_parents)
 {
 	return clk_register_mux(NULL, name, parents, num_parents,
 			CLK_SET_RATE_NO_REPARENT, reg, shift,
@@ -186,7 +188,8 @@ static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
 }
 
 static inline struct clk *imx_clk_mux2(const char *name, void __iomem *reg,
-		u8 shift, u8 width, const char **parents, int num_parents)
+			u8 shift, u8 width, const char * const *parents,
+			int num_parents)
 {
 	return clk_register_mux(NULL, name, parents, num_parents,
 			CLK_SET_RATE_NO_REPARENT | CLK_OPS_PARENT_ENABLE,
@@ -194,8 +197,9 @@ static inline struct clk *imx_clk_mux2(const char *name, void __iomem *reg,
 }
 
 static inline struct clk *imx_clk_mux_flags(const char *name,
-		void __iomem *reg, u8 shift, u8 width, const char **parents,
-		int num_parents, unsigned long flags)
+			void __iomem *reg, u8 shift, u8 width,
+			const char * const *parents, int num_parents,
+			unsigned long flags)
 {
 	return clk_register_mux(NULL, name, parents, num_parents,
 			flags | CLK_SET_RATE_NO_REPARENT, reg, shift, width, 0,
-- 
2.19.1

[PATCH 4.14 23/63] pstore/ram: Do not treat empty buffers as valid

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 30696378f68a9e3dad6bfe55938b112e72af00c2 ]

The ramoops backend currently calls persistent_ram_save_old() even
if a buffer is empty. While this appears to work, it is does not seem
like the right thing to do and could lead to future bugs so lets avoid
that. It also prevents misleading prints in the logs which claim the
buffer is valid.

I got something like:

	found existing buffer, size 0, start 0

When I was expecting:

	no valid data in buffer (sig = ...)

This bails out early (and reports with pr_debug()), since it's an
acceptable state.

Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/pstore/ram_core.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/fs/pstore/ram_core.c b/fs/pstore/ram_core.c
index ecdb3baa1283..11e558efd61e 100644
--- a/fs/pstore/ram_core.c
+++ b/fs/pstore/ram_core.c
@@ -488,6 +488,11 @@ static int persistent_ram_post_init(struct persistent_ram_zone *prz, u32 sig,
 	sig ^= PERSISTENT_RAM_SIG;
 
 	if (prz->buffer->sig == sig) {
+		if (buffer_size(prz) == 0) {
+			pr_debug("found existing empty buffer\n");
+			return 0;
+		}
+
 		if (buffer_size(prz) > prz->buffer_size ||
 		    buffer_start(prz) > buffer_size(prz))
 			pr_info("found existing invalid buffer, size %zu, start %zu\n",
-- 
2.19.1

[PATCH 4.14 24/63] powerpc/xmon: Fix invocation inside lock region

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 8d4a862276a9c30a269d368d324fb56529e6d5fd ]

Currently xmon needs to get devtree_lock (through rtas_token()) during its
invocation (at crash time). If there is a crash while devtree_lock is being
held, then xmon tries to get the lock but spins forever and never get into
the interactive debugger, as in the following case:

	int *ptr = NULL;
	raw_spin_lock_irqsave(&devtree_lock, flags);
	*ptr = 0xdeadbeef;

This patch avoids calling rtas_token(), thus trying to get the same lock,
at crash time. This new mechanism proposes getting the token at
initialization time (xmon_init()) and just consuming it at crash time.

This would allow xmon to be possible invoked independent of devtree_lock
being held or not.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/xmon/xmon.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index a5938fadd031..f752f771f29d 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -78,6 +78,9 @@ static int xmon_gate;
 #define xmon_owner 0
 #endif /* CONFIG_SMP */
 
+#ifdef CONFIG_PPC_PSERIES
+static int set_indicator_token = RTAS_UNKNOWN_SERVICE;
+#endif
 static unsigned long in_xmon __read_mostly = 0;
 static int xmon_on = IS_ENABLED(CONFIG_XMON_DEFAULT);
 
@@ -357,7 +360,6 @@ static inline void disable_surveillance(void)
 #ifdef CONFIG_PPC_PSERIES
 	/* Since this can't be a module, args should end up below 4GB. */
 	static struct rtas_args args;
-	int token;
 
 	/*
 	 * At this point we have got all the cpus we can into
@@ -366,11 +368,11 @@ static inline void disable_surveillance(void)
 	 * If we did try to take rtas.lock there would be a
 	 * real possibility of deadlock.
 	 */
-	token = rtas_token("set-indicator");
-	if (token == RTAS_UNKNOWN_SERVICE)
+	if (set_indicator_token == RTAS_UNKNOWN_SERVICE)
 		return;
 
-	rtas_call_unlocked(&args, token, 3, 1, NULL, SURVEILLANCE_TOKEN, 0, 0);
+	rtas_call_unlocked(&args, set_indicator_token, 3, 1, NULL,
+			   SURVEILLANCE_TOKEN, 0, 0);
 
 #endif /* CONFIG_PPC_PSERIES */
 }
@@ -3472,6 +3474,14 @@ static void xmon_init(int enable)
 		__debugger_iabr_match = xmon_iabr_match;
 		__debugger_break_match = xmon_break_match;
 		__debugger_fault_handler = xmon_fault_handler;
+
+#ifdef CONFIG_PPC_PSERIES
+		/*
+		 * Get the token here to avoid trying to get a lock
+		 * during the crash, causing a deadlock.
+		 */
+		set_indicator_token = rtas_token("set-indicator");
+#endif
 	} else {
 		__debugger = NULL;
 		__debugger_ipi = NULL;
-- 
2.19.1

[PATCH 4.14 25/63] powerpc/pseries/cpuidle: Fix preempt warning

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 2b038cbc5fcf12a7ee1cc9bfd5da1e46dacdee87 ]

When booting a pseries kernel with PREEMPT enabled, it dumps the
following warning:

   BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
   caller is pseries_processor_idle_init+0x5c/0x22c
   CPU: 13 PID: 1 Comm: swapper/0 Not tainted 4.20.0-rc3-00090-g12201a0128bc-dirty #828
   Call Trace:
   [c000000429437ab0] [c0000000009c8878] dump_stack+0xec/0x164 (unreliable)
   [c000000429437b00] [c0000000005f2f24] check_preemption_disabled+0x154/0x160
   [c000000429437b90] [c000000000cab8e8] pseries_processor_idle_init+0x5c/0x22c
   [c000000429437c10] [c000000000010ed4] do_one_initcall+0x64/0x300
   [c000000429437ce0] [c000000000c54500] kernel_init_freeable+0x3f0/0x500
   [c000000429437db0] [c0000000000112dc] kernel_init+0x2c/0x160
   [c000000429437e20] [c00000000000c1d0] ret_from_kernel_thread+0x5c/0x6c

This happens because the code calls get_lppaca() which calls
get_paca() and it checks if preemption is disabled through
check_preemption_disabled().

Preemption should be disabled because the per CPU variable may make no
sense if there is a preemption (and a CPU switch) after it reads the
per CPU data and when it is used.

In this device driver specifically, it is not a problem, because this
code just needs to have access to one lppaca struct, and it does not
matter if it is the current per CPU lppaca struct or not (i.e. when
there is a preemption and a CPU migration).

That said, the most appropriate fix seems to be related to avoiding
the debug_smp_processor_id() call at get_paca(), instead of calling
preempt_disable() before get_paca().

Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpuidle/cpuidle-pseries.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/cpuidle/cpuidle-pseries.c b/drivers/cpuidle/cpuidle-pseries.c
index a187a39fb866..7f21c6a57178 100644
--- a/drivers/cpuidle/cpuidle-pseries.c
+++ b/drivers/cpuidle/cpuidle-pseries.c
@@ -239,7 +239,13 @@ static int pseries_idle_probe(void)
 		return -ENODEV;
 
 	if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
-		if (lppaca_shared_proc(get_lppaca())) {
+		/*
+		 * Use local_paca instead of get_lppaca() since
+		 * preemption is not disabled, and it is not required in
+		 * fact, since lppaca_ptr does not need to be the value
+		 * associated to the current CPU, it can be from any CPU.
+		 */
+		if (lppaca_shared_proc(local_paca->lppaca_ptr)) {
 			cpuidle_state_table = shared_states;
 			max_idle_state = ARRAY_SIZE(shared_states);
 		} else {
-- 
2.19.1

[PATCH 4.14 26/63] media: firewire: Fix app_info parameter type in avc_ca{,_app}_info

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit b2e9a4eda11fd2cb1e6714e9ad3f455c402568ff ]

Clang warns:

drivers/media/firewire/firedtv-avc.c:999:45: warning: implicit
conversion from 'int' to 'char' changes value from 159 to -97
[-Wconstant-conversion]
        app_info[0] = (EN50221_TAG_APP_INFO >> 16) & 0xff;
                    ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
drivers/media/firewire/firedtv-avc.c:1000:45: warning: implicit
conversion from 'int' to 'char' changes value from 128 to -128
[-Wconstant-conversion]
        app_info[1] = (EN50221_TAG_APP_INFO >>  8) & 0xff;
                    ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
drivers/media/firewire/firedtv-avc.c:1040:44: warning: implicit
conversion from 'int' to 'char' changes value from 159 to -97
[-Wconstant-conversion]
        app_info[0] = (EN50221_TAG_CA_INFO >> 16) & 0xff;
                    ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
drivers/media/firewire/firedtv-avc.c:1041:44: warning: implicit
conversion from 'int' to 'char' changes value from 128 to -128
[-Wconstant-conversion]
        app_info[1] = (EN50221_TAG_CA_INFO >>  8) & 0xff;
                    ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
4 warnings generated.

Change app_info's type to unsigned char to match the type of the
member msg in struct ca_msg, which is the only thing passed into the
app_info parameter in this function.

Link: https://github.com/ClangBuiltLinux/linux/issues/105

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/firewire/firedtv-avc.c | 6 ++++--
 drivers/media/firewire/firedtv.h     | 6 ++++--
 2 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/media/firewire/firedtv-avc.c b/drivers/media/firewire/firedtv-avc.c
index 5bde6c209cd7..b243e4a52f10 100644
--- a/drivers/media/firewire/firedtv-avc.c
+++ b/drivers/media/firewire/firedtv-avc.c
@@ -968,7 +968,8 @@ static int get_ca_object_length(struct avc_response_frame *r)
 	return r->operand[7];
 }
 
-int avc_ca_app_info(struct firedtv *fdtv, char *app_info, unsigned int *len)
+int avc_ca_app_info(struct firedtv *fdtv, unsigned char *app_info,
+		    unsigned int *len)
 {
 	struct avc_command_frame *c = (void *)fdtv->avc_data;
 	struct avc_response_frame *r = (void *)fdtv->avc_data;
@@ -1009,7 +1010,8 @@ out:
 	return ret;
 }
 
-int avc_ca_info(struct firedtv *fdtv, char *app_info, unsigned int *len)
+int avc_ca_info(struct firedtv *fdtv, unsigned char *app_info,
+		unsigned int *len)
 {
 	struct avc_command_frame *c = (void *)fdtv->avc_data;
 	struct avc_response_frame *r = (void *)fdtv->avc_data;
diff --git a/drivers/media/firewire/firedtv.h b/drivers/media/firewire/firedtv.h
index 345d1eda8c05..5b18a08c6285 100644
--- a/drivers/media/firewire/firedtv.h
+++ b/drivers/media/firewire/firedtv.h
@@ -124,8 +124,10 @@ int avc_lnb_control(struct firedtv *fdtv, char voltage, char burst,
 		    struct dvb_diseqc_master_cmd *diseqcmd);
 void avc_remote_ctrl_work(struct work_struct *work);
 int avc_register_remote_control(struct firedtv *fdtv);
-int avc_ca_app_info(struct firedtv *fdtv, char *app_info, unsigned int *len);
-int avc_ca_info(struct firedtv *fdtv, char *app_info, unsigned int *len);
+int avc_ca_app_info(struct firedtv *fdtv, unsigned char *app_info,
+		    unsigned int *len);
+int avc_ca_info(struct firedtv *fdtv, unsigned char *app_info,
+		unsigned int *len);
 int avc_ca_reset(struct firedtv *fdtv);
 int avc_ca_pmt(struct firedtv *fdtv, char *app_info, int length);
 int avc_ca_get_time_date(struct firedtv *fdtv, int *interval);
-- 
2.19.1

[PATCH 4.14 27/63] media: venus: core: Set dma maximum segment size

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit de2563bce7a157f5296bab94f3843d7d64fb14b4 ]

Turning on CONFIG_DMA_API_DEBUG_SG results in the following error:

[  460.308650] ------------[ cut here ]------------
[  460.313490] qcom-venus aa00000.video-codec: DMA-API: mapping sg segment longer than device claims to support [len=4194304] [max=65536]
[  460.326017] WARNING: CPU: 3 PID: 3555 at src/kernel/dma/debug.c:1301 debug_dma_map_sg+0x174/0x254
[  460.338888] Modules linked in: venus_dec venus_enc videobuf2_dma_sg videobuf2_memops hci_uart btqca bluetooth venus_core v4l2_mem2mem videobuf2_v4l2 videobuf2_common ath10k_snoc ath10k_core ath lzo lzo_compress zramjoydev
[  460.375811] CPU: 3 PID: 3555 Comm: V4L2DecoderThre Tainted: G        W         4.19.1 #82
[  460.384223] Hardware name: Google Cheza (rev1) (DT)
[  460.389251] pstate: 60400009 (nZCv daif +PAN -UAO)
[  460.394191] pc : debug_dma_map_sg+0x174/0x254
[  460.398680] lr : debug_dma_map_sg+0x174/0x254
[  460.403162] sp : ffffff80200c37d0
[  460.406583] x29: ffffff80200c3830 x28: 0000000000010000
[  460.412056] x27: 00000000ffffffff x26: ffffffc0f785ea80
[  460.417532] x25: 0000000000000000 x24: ffffffc0f4ea1290
[  460.423001] x23: ffffffc09e700300 x22: ffffffc0f4ea1290
[  460.428470] x21: ffffff8009037000 x20: 0000000000000001
[  460.433936] x19: ffffff80091b0000 x18: 0000000000000000
[  460.439411] x17: 0000000000000000 x16: 000000000000f251
[  460.444885] x15: 0000000000000006 x14: 0720072007200720
[  460.450354] x13: ffffff800af536e0 x12: 0000000000000000
[  460.455822] x11: 0000000000000000 x10: 0000000000000000
[  460.461288] x9 : 537944d9c6c48d00 x8 : 537944d9c6c48d00
[  460.466758] x7 : 0000000000000000 x6 : ffffffc0f8d98f80
[  460.472230] x5 : 0000000000000000 x4 : 0000000000000000
[  460.477703] x3 : 000000000000008a x2 : ffffffc0fdb13948
[  460.483170] x1 : ffffffc0fdb0b0b0 x0 : 000000000000007a
[  460.488640] Call trace:
[  460.491165]  debug_dma_map_sg+0x174/0x254
[  460.495307]  vb2_dma_sg_alloc+0x260/0x2dc [videobuf2_dma_sg]
[  460.501150]  __vb2_queue_alloc+0x164/0x374 [videobuf2_common]
[  460.507076]  vb2_core_reqbufs+0xfc/0x23c [videobuf2_common]
[  460.512815]  vb2_reqbufs+0x44/0x5c [videobuf2_v4l2]
[  460.517853]  v4l2_m2m_reqbufs+0x44/0x78 [v4l2_mem2mem]
[  460.523144]  v4l2_m2m_ioctl_reqbufs+0x1c/0x28 [v4l2_mem2mem]
[  460.528976]  v4l_reqbufs+0x30/0x40
[  460.532480]  __video_do_ioctl+0x36c/0x454
[  460.536610]  video_usercopy+0x25c/0x51c
[  460.540572]  video_ioctl2+0x38/0x48
[  460.544176]  v4l2_ioctl+0x60/0x74
[  460.547602]  do_video_ioctl+0x948/0x3520
[  460.551648]  v4l2_compat_ioctl32+0x60/0x98
[  460.555872]  __arm64_compat_sys_ioctl+0x134/0x20c
[  460.560718]  el0_svc_common+0x9c/0xe4
[  460.564498]  el0_svc_compat_handler+0x2c/0x38
[  460.568982]  el0_svc_compat+0x8/0x18
[  460.572672] ---[ end trace ce209b87b2f3af88 ]---

>From above warning one would deduce that the sg segment will overflow
the device's capacity. In reality, the hardware can accommodate larger
sg segments.
So, initialize the max segment size properly to weed out this warning.

Based on a similar patch sent by Sean Paul for mdss:
https://patchwork.kernel.org/patch/10671457/

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Acked-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/qcom/venus/core.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
index 41eef376eb2d..769e9e68562d 100644
--- a/drivers/media/platform/qcom/venus/core.c
+++ b/drivers/media/platform/qcom/venus/core.c
@@ -187,6 +187,14 @@ static int venus_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	if (!dev->dma_parms) {
+		dev->dma_parms = devm_kzalloc(dev, sizeof(*dev->dma_parms),
+					      GFP_KERNEL);
+		if (!dev->dma_parms)
+			return -ENOMEM;
+	}
+	dma_set_max_seg_size(dev, DMA_BIT_MASK(32));
+
 	INIT_LIST_HEAD(&core->instances);
 	mutex_init(&core->lock);
 	INIT_DELAYED_WORK(&core->work, venus_sys_error_handler);
-- 
2.19.1

[PATCH 4.14 28/63] net: call sk_dst_reset when set SO_DONTROUTE

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 0fbe82e628c817e292ff588cd5847fc935e025f2 ]

after set SO_DONTROUTE to 1, the IP layer should not route packets if
the dest IP address is not in link scope. But if the socket has cached
the dst_entry, such packets would be routed until the sk_dst_cache
expires. So we should clean the sk_dst_cache when a user set
SO_DONTROUTE option. Below are server/client python scripts which
could reprodue this issue:

server side code:

==========================================================================
import socket
import struct
import time

s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.bind(('0.0.0.0', 9000))
s.listen(1)
sock, addr = s.accept()
sock.setsockopt(socket.SOL_SOCKET, socket.SO_DONTROUTE, struct.pack('i', 1))
while True:
    sock.send(b'foo')
    time.sleep(1)
==========================================================================

client side code:
==========================================================================
import socket
import time

s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
s.connect(('server_address', 9000))
while True:
    data = s.recv(1024)
    print(data)
==========================================================================

Signed-off-by: yupeng <yupeng0921@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/sock.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/core/sock.c b/net/core/sock.c
index 01cae48d6eef..a88579589946 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -735,6 +735,7 @@ int sock_setsockopt(struct socket *sock, int level, int optname,
 		break;
 	case SO_DONTROUTE:
 		sock_valbool_flag(sk, SOCK_LOCALROUTE, valbool);
+		sk_dst_reset(sk);
 		break;
 	case SO_BROADCAST:
 		sock_valbool_flag(sk, SOCK_BROADCAST, valbool);
-- 
2.19.1

[PATCH 4.14 29/63] scsi: target: use consistent left-aligned ASCII INQUIRY data

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 0de263577de5d5e052be5f4f93334e63cc8a7f0b ]

spc5r17.pdf specifies:

  4.3.1 ASCII data field requirements
  ASCII data fields shall contain only ASCII printable characters (i.e.,
  code values 20h to 7Eh) and may be terminated with one or more ASCII null
  (00h) characters.  ASCII data fields described as being left-aligned
  shall have any unused bytes at the end of the field (i.e., highest
  offset) and the unused bytes shall be filled with ASCII space characters
  (20h).

LIO currently space-pads the T10 VENDOR IDENTIFICATION and PRODUCT
IDENTIFICATION fields in the standard INQUIRY data. However, the PRODUCT
REVISION LEVEL field in the standard INQUIRY data as well as the T10 VENDOR
IDENTIFICATION field in the INQUIRY Device Identification VPD Page are
zero-terminated/zero-padded.

Fix this inconsistency by using space-padding for all of the above fields.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bryant G. Ly <bly@catalogicsoftware.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_spc.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/target/target_core_spc.c b/drivers/target/target_core_spc.c
index cb0461a10808..93424db5f002 100644
--- a/drivers/target/target_core_spc.c
+++ b/drivers/target/target_core_spc.c
@@ -108,12 +108,17 @@ spc_emulate_inquiry_std(struct se_cmd *cmd, unsigned char *buf)
 
 	buf[7] = 0x2; /* CmdQue=1 */
 
-	memcpy(&buf[8], "LIO-ORG ", 8);
-	memset(&buf[16], 0x20, 16);
+	/*
+	 * ASCII data fields described as being left-aligned shall have any
+	 * unused bytes at the end of the field (i.e., highest offset) and the
+	 * unused bytes shall be filled with ASCII space characters (20h).
+	 */
+	memset(&buf[8], 0x20, 8 + 16 + 4);
+	memcpy(&buf[8], "LIO-ORG", sizeof("LIO-ORG") - 1);
 	memcpy(&buf[16], dev->t10_wwn.model,
-	       min_t(size_t, strlen(dev->t10_wwn.model), 16));
+	       strnlen(dev->t10_wwn.model, 16));
 	memcpy(&buf[32], dev->t10_wwn.revision,
-	       min_t(size_t, strlen(dev->t10_wwn.revision), 4));
+	       strnlen(dev->t10_wwn.revision, 4));
 	buf[4] = 31; /* Set additional length to 31 */
 
 	return 0;
@@ -251,7 +256,9 @@ check_t10_vend_desc:
 	buf[off] = 0x2; /* ASCII */
 	buf[off+1] = 0x1; /* T10 Vendor ID */
 	buf[off+2] = 0x0;
-	memcpy(&buf[off+4], "LIO-ORG", 8);
+	/* left align Vendor ID and pad with spaces */
+	memset(&buf[off+4], 0x20, 8);
+	memcpy(&buf[off+4], "LIO-ORG", sizeof("LIO-ORG") - 1);
 	/* Extra Byte for NULL Terminator */
 	id_len++;
 	/* Identifier Length */
-- 
2.19.1

[PATCH 4.14 30/63] selftests: do not macro-expand failed assertion expressions

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit b708a3cc9600390ccaa2b68a88087dd265154b2b ]

I've stumbled over the current macro-expand behaviour of the test
harness:

$ gcc -Wall -xc - <<'__EOF__'
TEST(macro) {
	int status = 0;
	ASSERT_TRUE(WIFSIGNALED(status));
}
TEST_HARNESS_MAIN
__EOF__
$ ./a.out
[==========] Running 1 tests from 1 test cases.
[ RUN      ] global.macro
<stdin>:4:global.macro:Expected 0 (0) != (((signed char) (((status) & 0x7f) + 1) >> 1) > 0) (0)
global.macro: Test terminated by assertion
[     FAIL ] global.macro
[==========] 0 / 1 tests passed.
[  FAILED  ]

With this change the output of the same test looks much more
comprehensible:

[==========] Running 1 tests from 1 test cases.
[ RUN      ] global.macro
<stdin>:4:global.macro:Expected 0 (0) != WIFSIGNALED(status) (0)
global.macro: Test terminated by assertion
[     FAIL ] global.macro
[==========] 0 / 1 tests passed.
[  FAILED  ]

The issue is very similar to the bug fixed in glibc assert(3)
three years ago:
https://sourceware.org/bugzilla/show_bug.cgi?id=18604

Cc: Shuah Khan <shuah@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/kselftest_harness.h | 42 ++++++++++-----------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h
index e81bd28bdd89..8f32d699d6c5 100644
--- a/tools/testing/selftests/kselftest_harness.h
+++ b/tools/testing/selftests/kselftest_harness.h
@@ -330,7 +330,7 @@
  * ASSERT_EQ(expected, measured): expected == measured
  */
 #define ASSERT_EQ(expected, seen) \
-	__EXPECT(expected, seen, ==, 1)
+	__EXPECT(expected, #expected, seen, #seen, ==, 1)
 
 /**
  * ASSERT_NE(expected, seen)
@@ -341,7 +341,7 @@
  * ASSERT_NE(expected, measured): expected != measured
  */
 #define ASSERT_NE(expected, seen) \
-	__EXPECT(expected, seen, !=, 1)
+	__EXPECT(expected, #expected, seen, #seen, !=, 1)
 
 /**
  * ASSERT_LT(expected, seen)
@@ -352,7 +352,7 @@
  * ASSERT_LT(expected, measured): expected < measured
  */
 #define ASSERT_LT(expected, seen) \
-	__EXPECT(expected, seen, <, 1)
+	__EXPECT(expected, #expected, seen, #seen, <, 1)
 
 /**
  * ASSERT_LE(expected, seen)
@@ -363,7 +363,7 @@
  * ASSERT_LE(expected, measured): expected <= measured
  */
 #define ASSERT_LE(expected, seen) \
-	__EXPECT(expected, seen, <=, 1)
+	__EXPECT(expected, #expected, seen, #seen, <=, 1)
 
 /**
  * ASSERT_GT(expected, seen)
@@ -374,7 +374,7 @@
  * ASSERT_GT(expected, measured): expected > measured
  */
 #define ASSERT_GT(expected, seen) \
-	__EXPECT(expected, seen, >, 1)
+	__EXPECT(expected, #expected, seen, #seen, >, 1)
 
 /**
  * ASSERT_GE(expected, seen)
@@ -385,7 +385,7 @@
  * ASSERT_GE(expected, measured): expected >= measured
  */
 #define ASSERT_GE(expected, seen) \
-	__EXPECT(expected, seen, >=, 1)
+	__EXPECT(expected, #expected, seen, #seen, >=, 1)
 
 /**
  * ASSERT_NULL(seen)
@@ -395,7 +395,7 @@
  * ASSERT_NULL(measured): NULL == measured
  */
 #define ASSERT_NULL(seen) \
-	__EXPECT(NULL, seen, ==, 1)
+	__EXPECT(NULL, "NULL", seen, #seen, ==, 1)
 
 /**
  * ASSERT_TRUE(seen)
@@ -405,7 +405,7 @@
  * ASSERT_TRUE(measured): measured != 0
  */
 #define ASSERT_TRUE(seen) \
-	ASSERT_NE(0, seen)
+	__EXPECT(0, "0", seen, #seen, !=, 1)
 
 /**
  * ASSERT_FALSE(seen)
@@ -415,7 +415,7 @@
  * ASSERT_FALSE(measured): measured == 0
  */
 #define ASSERT_FALSE(seen) \
-	ASSERT_EQ(0, seen)
+	__EXPECT(0, "0", seen, #seen, ==, 1)
 
 /**
  * ASSERT_STREQ(expected, seen)
@@ -448,7 +448,7 @@
  * EXPECT_EQ(expected, measured): expected == measured
  */
 #define EXPECT_EQ(expected, seen) \
-	__EXPECT(expected, seen, ==, 0)
+	__EXPECT(expected, #expected, seen, #seen, ==, 0)
 
 /**
  * EXPECT_NE(expected, seen)
@@ -459,7 +459,7 @@
  * EXPECT_NE(expected, measured): expected != measured
  */
 #define EXPECT_NE(expected, seen) \
-	__EXPECT(expected, seen, !=, 0)
+	__EXPECT(expected, #expected, seen, #seen, !=, 0)
 
 /**
  * EXPECT_LT(expected, seen)
@@ -470,7 +470,7 @@
  * EXPECT_LT(expected, measured): expected < measured
  */
 #define EXPECT_LT(expected, seen) \
-	__EXPECT(expected, seen, <, 0)
+	__EXPECT(expected, #expected, seen, #seen, <, 0)
 
 /**
  * EXPECT_LE(expected, seen)
@@ -481,7 +481,7 @@
  * EXPECT_LE(expected, measured): expected <= measured
  */
 #define EXPECT_LE(expected, seen) \
-	__EXPECT(expected, seen, <=, 0)
+	__EXPECT(expected, #expected, seen, #seen, <=, 0)
 
 /**
  * EXPECT_GT(expected, seen)
@@ -492,7 +492,7 @@
  * EXPECT_GT(expected, measured): expected > measured
  */
 #define EXPECT_GT(expected, seen) \
-	__EXPECT(expected, seen, >, 0)
+	__EXPECT(expected, #expected, seen, #seen, >, 0)
 
 /**
  * EXPECT_GE(expected, seen)
@@ -503,7 +503,7 @@
  * EXPECT_GE(expected, measured): expected >= measured
  */
 #define EXPECT_GE(expected, seen) \
-	__EXPECT(expected, seen, >=, 0)
+	__EXPECT(expected, #expected, seen, #seen, >=, 0)
 
 /**
  * EXPECT_NULL(seen)
@@ -513,7 +513,7 @@
  * EXPECT_NULL(measured): NULL == measured
  */
 #define EXPECT_NULL(seen) \
-	__EXPECT(NULL, seen, ==, 0)
+	__EXPECT(NULL, "NULL", seen, #seen, ==, 0)
 
 /**
  * EXPECT_TRUE(seen)
@@ -523,7 +523,7 @@
  * EXPECT_TRUE(measured): 0 != measured
  */
 #define EXPECT_TRUE(seen) \
-	EXPECT_NE(0, seen)
+	__EXPECT(0, "0", seen, #seen, !=, 0)
 
 /**
  * EXPECT_FALSE(seen)
@@ -533,7 +533,7 @@
  * EXPECT_FALSE(measured): 0 == measured
  */
 #define EXPECT_FALSE(seen) \
-	EXPECT_EQ(0, seen)
+	__EXPECT(0, "0", seen, #seen, ==, 0)
 
 /**
  * EXPECT_STREQ(expected, seen)
@@ -573,7 +573,7 @@
 	if (_metadata->passed && _metadata->step < 255) \
 		_metadata->step++;
 
-#define __EXPECT(_expected, _seen, _t, _assert) do { \
+#define __EXPECT(_expected, _expected_str, _seen, _seen_str, _t, _assert) do { \
 	/* Avoid multiple evaluation of the cases */ \
 	__typeof__(_expected) __exp = (_expected); \
 	__typeof__(_seen) __seen = (_seen); \
@@ -582,8 +582,8 @@
 		unsigned long long __exp_print = (uintptr_t)__exp; \
 		unsigned long long __seen_print = (uintptr_t)__seen; \
 		__TH_LOG("Expected %s (%llu) %s %s (%llu)", \
-			 #_expected, __exp_print, #_t, \
-			 #_seen, __seen_print); \
+			 _expected_str, __exp_print, #_t, \
+			 _seen_str, __seen_print); \
 		_metadata->passed = 0; \
 		/* Ensure the optional handler is triggered */ \
 		_metadata->trigger = 1; \
-- 
2.19.1

[PATCH 4.14 30/63] selftests: do not macro-expand failed assertion expressions

[gregkh]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit b708a3cc9600390ccaa2b68a88087dd265154b2b ]

I've stumbled over the current macro-expand behaviour of the test
harness:

$ gcc -Wall -xc - <<'__EOF__'
TEST(macro) {
	int status = 0;
	ASSERT_TRUE(WIFSIGNALED(status));
}
TEST_HARNESS_MAIN
__EOF__
$ ./a.out
[==========] Running 1 tests from 1 test cases.
[ RUN      ] global.macro
<stdin>:4:global.macro:Expected 0 (0) != (((signed char) (((status) & 0x7f) + 1) >> 1) > 0) (0)
global.macro: Test terminated by assertion
[     FAIL ] global.macro
[==========] 0 / 1 tests passed.
[  FAILED  ]

With this change the output of the same test looks much more
comprehensible:

[==========] Running 1 tests from 1 test cases.
[ RUN      ] global.macro
<stdin>:4:global.macro:Expected 0 (0) != WIFSIGNALED(status) (0)
global.macro: Test terminated by assertion
[     FAIL ] global.macro
[==========] 0 / 1 tests passed.
[  FAILED  ]

The issue is very similar to the bug fixed in glibc assert(3)
three years ago:
https://sourceware.org/bugzilla/show_bug.cgi?id=18604

Cc: Shuah Khan <shuah at kernel.org>
Cc: Kees Cook <keescook at chromium.org>
Cc: Andy Lutomirski <luto at amacapital.net>
Cc: Will Drewry <wad at chromium.org>
Cc: linux-kselftest at vger.kernel.org
Signed-off-by: Dmitry V. Levin <ldv at altlinux.org>
Acked-by: Kees Cook <keescook at chromium.org>
Signed-off-by: Shuah Khan <shuah at kernel.org>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 tools/testing/selftests/kselftest_harness.h | 42 ++++++++++-----------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h
index e81bd28bdd89..8f32d699d6c5 100644
--- a/tools/testing/selftests/kselftest_harness.h
+++ b/tools/testing/selftests/kselftest_harness.h
@@ -330,7 +330,7 @@
  * ASSERT_EQ(expected, measured): expected == measured
  */
 #define ASSERT_EQ(expected, seen) \
-	__EXPECT(expected, seen, ==, 1)
+	__EXPECT(expected, #expected, seen, #seen, ==, 1)
 
 /**
  * ASSERT_NE(expected, seen)
@@ -341,7 +341,7 @@
  * ASSERT_NE(expected, measured): expected != measured
  */
 #define ASSERT_NE(expected, seen) \
-	__EXPECT(expected, seen, !=, 1)
+	__EXPECT(expected, #expected, seen, #seen, !=, 1)
 
 /**
  * ASSERT_LT(expected, seen)
@@ -352,7 +352,7 @@
  * ASSERT_LT(expected, measured): expected < measured
  */
 #define ASSERT_LT(expected, seen) \
-	__EXPECT(expected, seen, <, 1)
+	__EXPECT(expected, #expected, seen, #seen, <, 1)
 
 /**
  * ASSERT_LE(expected, seen)
@@ -363,7 +363,7 @@
  * ASSERT_LE(expected, measured): expected <= measured
  */
 #define ASSERT_LE(expected, seen) \
-	__EXPECT(expected, seen, <=, 1)
+	__EXPECT(expected, #expected, seen, #seen, <=, 1)
 
 /**
  * ASSERT_GT(expected, seen)
@@ -374,7 +374,7 @@
  * ASSERT_GT(expected, measured): expected > measured
  */
 #define ASSERT_GT(expected, seen) \
-	__EXPECT(expected, seen, >, 1)
+	__EXPECT(expected, #expected, seen, #seen, >, 1)
 
 /**
  * ASSERT_GE(expected, seen)
@@ -385,7 +385,7 @@
  * ASSERT_GE(expected, measured): expected >= measured
  */
 #define ASSERT_GE(expected, seen) \
-	__EXPECT(expected, seen, >=, 1)
+	__EXPECT(expected, #expected, seen, #seen, >=, 1)
 
 /**
  * ASSERT_NULL(seen)
@@ -395,7 +395,7 @@
  * ASSERT_NULL(measured): NULL == measured
  */
 #define ASSERT_NULL(seen) \
-	__EXPECT(NULL, seen, ==, 1)
+	__EXPECT(NULL, "NULL", seen, #seen, ==, 1)
 
 /**
  * ASSERT_TRUE(seen)
@@ -405,7 +405,7 @@
  * ASSERT_TRUE(measured): measured != 0
  */
 #define ASSERT_TRUE(seen) \
-	ASSERT_NE(0, seen)
+	__EXPECT(0, "0", seen, #seen, !=, 1)
 
 /**
  * ASSERT_FALSE(seen)
@@ -415,7 +415,7 @@
  * ASSERT_FALSE(measured): measured == 0
  */
 #define ASSERT_FALSE(seen) \
-	ASSERT_EQ(0, seen)
+	__EXPECT(0, "0", seen, #seen, ==, 1)
 
 /**
  * ASSERT_STREQ(expected, seen)
@@ -448,7 +448,7 @@
  * EXPECT_EQ(expected, measured): expected == measured
  */
 #define EXPECT_EQ(expected, seen) \
-	__EXPECT(expected, seen, ==, 0)
+	__EXPECT(expected, #expected, seen, #seen, ==, 0)
 
 /**
  * EXPECT_NE(expected, seen)
@@ -459,7 +459,7 @@
  * EXPECT_NE(expected, measured): expected != measured
  */
 #define EXPECT_NE(expected, seen) \
-	__EXPECT(expected, seen, !=, 0)
+	__EXPECT(expected, #expected, seen, #seen, !=, 0)
 
 /**
  * EXPECT_LT(expected, seen)
@@ -470,7 +470,7 @@
  * EXPECT_LT(expected, measured): expected < measured
  */
 #define EXPECT_LT(expected, seen) \
-	__EXPECT(expected, seen, <, 0)
+	__EXPECT(expected, #expected, seen, #seen, <, 0)
 
 /**
  * EXPECT_LE(expected, seen)
@@ -481,7 +481,7 @@
  * EXPECT_LE(expected, measured): expected <= measured
  */
 #define EXPECT_LE(expected, seen) \
-	__EXPECT(expected, seen, <=, 0)
+	__EXPECT(expected, #expected, seen, #seen, <=, 0)
 
 /**
  * EXPECT_GT(expected, seen)
@@ -492,7 +492,7 @@
  * EXPECT_GT(expected, measured): expected > measured
  */
 #define EXPECT_GT(expected, seen) \
-	__EXPECT(expected, seen, >, 0)
+	__EXPECT(expected, #expected, seen, #seen, >, 0)
 
 /**
  * EXPECT_GE(expected, seen)
@@ -503,7 +503,7 @@
  * EXPECT_GE(expected, measured): expected >= measured
  */
 #define EXPECT_GE(expected, seen) \
-	__EXPECT(expected, seen, >=, 0)
+	__EXPECT(expected, #expected, seen, #seen, >=, 0)
 
 /**
  * EXPECT_NULL(seen)
@@ -513,7 +513,7 @@
  * EXPECT_NULL(measured): NULL == measured
  */
 #define EXPECT_NULL(seen) \
-	__EXPECT(NULL, seen, ==, 0)
+	__EXPECT(NULL, "NULL", seen, #seen, ==, 0)
 
 /**
  * EXPECT_TRUE(seen)
@@ -523,7 +523,7 @@
  * EXPECT_TRUE(measured): 0 != measured
  */
 #define EXPECT_TRUE(seen) \
-	EXPECT_NE(0, seen)
+	__EXPECT(0, "0", seen, #seen, !=, 0)
 
 /**
  * EXPECT_FALSE(seen)
@@ -533,7 +533,7 @@
  * EXPECT_FALSE(measured): 0 == measured
  */
 #define EXPECT_FALSE(seen) \
-	EXPECT_EQ(0, seen)
+	__EXPECT(0, "0", seen, #seen, ==, 0)
 
 /**
  * EXPECT_STREQ(expected, seen)
@@ -573,7 +573,7 @@
 	if (_metadata->passed && _metadata->step < 255) \
 		_metadata->step++;
 
-#define __EXPECT(_expected, _seen, _t, _assert) do { \
+#define __EXPECT(_expected, _expected_str, _seen, _seen_str, _t, _assert) do { \
 	/* Avoid multiple evaluation of the cases */ \
 	__typeof__(_expected) __exp = (_expected); \
 	__typeof__(_seen) __seen = (_seen); \
@@ -582,8 +582,8 @@
 		unsigned long long __exp_print = (uintptr_t)__exp; \
 		unsigned long long __seen_print = (uintptr_t)__seen; \
 		__TH_LOG("Expected %s (%llu) %s %s (%llu)", \
-			 #_expected, __exp_print, #_t, \
-			 #_seen, __seen_print); \
+			 _expected_str, __exp_print, #_t, \
+			 _seen_str, __seen_print); \
 		_metadata->passed = 0; \
 		/* Ensure the optional handler is triggered */ \
 		_metadata->trigger = 1; \
-- 
2.19.1

[PATCH 4.14 30/63] selftests: do not macro-expand failed assertion expressions

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit b708a3cc9600390ccaa2b68a88087dd265154b2b ]

I've stumbled over the current macro-expand behaviour of the test
harness:

$ gcc -Wall -xc - <<'__EOF__'
TEST(macro) {
	int status = 0;
	ASSERT_TRUE(WIFSIGNALED(status));
}
TEST_HARNESS_MAIN
__EOF__
$ ./a.out
[==========] Running 1 tests from 1 test cases.
[ RUN      ] global.macro
<stdin>:4:global.macro:Expected 0 (0) != (((signed char) (((status) & 0x7f) + 1) >> 1) > 0) (0)
global.macro: Test terminated by assertion
[     FAIL ] global.macro
[==========] 0 / 1 tests passed.
[  FAILED  ]

With this change the output of the same test looks much more
comprehensible:

[==========] Running 1 tests from 1 test cases.
[ RUN      ] global.macro
<stdin>:4:global.macro:Expected 0 (0) != WIFSIGNALED(status) (0)
global.macro: Test terminated by assertion
[     FAIL ] global.macro
[==========] 0 / 1 tests passed.
[  FAILED  ]

The issue is very similar to the bug fixed in glibc assert(3)
three years ago:
https://sourceware.org/bugzilla/show_bug.cgi?id=18604

Cc: Shuah Khan <shuah at kernel.org>
Cc: Kees Cook <keescook at chromium.org>
Cc: Andy Lutomirski <luto at amacapital.net>
Cc: Will Drewry <wad at chromium.org>
Cc: linux-kselftest at vger.kernel.org
Signed-off-by: Dmitry V. Levin <ldv at altlinux.org>
Acked-by: Kees Cook <keescook at chromium.org>
Signed-off-by: Shuah Khan <shuah at kernel.org>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 tools/testing/selftests/kselftest_harness.h | 42 ++++++++++-----------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h
index e81bd28bdd89..8f32d699d6c5 100644
--- a/tools/testing/selftests/kselftest_harness.h
+++ b/tools/testing/selftests/kselftest_harness.h
@@ -330,7 +330,7 @@
  * ASSERT_EQ(expected, measured): expected == measured
  */
 #define ASSERT_EQ(expected, seen) \
-	__EXPECT(expected, seen, ==, 1)
+	__EXPECT(expected, #expected, seen, #seen, ==, 1)
 
 /**
  * ASSERT_NE(expected, seen)
@@ -341,7 +341,7 @@
  * ASSERT_NE(expected, measured): expected != measured
  */
 #define ASSERT_NE(expected, seen) \
-	__EXPECT(expected, seen, !=, 1)
+	__EXPECT(expected, #expected, seen, #seen, !=, 1)
 
 /**
  * ASSERT_LT(expected, seen)
@@ -352,7 +352,7 @@
  * ASSERT_LT(expected, measured): expected < measured
  */
 #define ASSERT_LT(expected, seen) \
-	__EXPECT(expected, seen, <, 1)
+	__EXPECT(expected, #expected, seen, #seen, <, 1)
 
 /**
  * ASSERT_LE(expected, seen)
@@ -363,7 +363,7 @@
  * ASSERT_LE(expected, measured): expected <= measured
  */
 #define ASSERT_LE(expected, seen) \
-	__EXPECT(expected, seen, <=, 1)
+	__EXPECT(expected, #expected, seen, #seen, <=, 1)
 
 /**
  * ASSERT_GT(expected, seen)
@@ -374,7 +374,7 @@
  * ASSERT_GT(expected, measured): expected > measured
  */
 #define ASSERT_GT(expected, seen) \
-	__EXPECT(expected, seen, >, 1)
+	__EXPECT(expected, #expected, seen, #seen, >, 1)
 
 /**
  * ASSERT_GE(expected, seen)
@@ -385,7 +385,7 @@
  * ASSERT_GE(expected, measured): expected >= measured
  */
 #define ASSERT_GE(expected, seen) \
-	__EXPECT(expected, seen, >=, 1)
+	__EXPECT(expected, #expected, seen, #seen, >=, 1)
 
 /**
  * ASSERT_NULL(seen)
@@ -395,7 +395,7 @@
  * ASSERT_NULL(measured): NULL == measured
  */
 #define ASSERT_NULL(seen) \
-	__EXPECT(NULL, seen, ==, 1)
+	__EXPECT(NULL, "NULL", seen, #seen, ==, 1)
 
 /**
  * ASSERT_TRUE(seen)
@@ -405,7 +405,7 @@
  * ASSERT_TRUE(measured): measured != 0
  */
 #define ASSERT_TRUE(seen) \
-	ASSERT_NE(0, seen)
+	__EXPECT(0, "0", seen, #seen, !=, 1)
 
 /**
  * ASSERT_FALSE(seen)
@@ -415,7 +415,7 @@
  * ASSERT_FALSE(measured): measured == 0
  */
 #define ASSERT_FALSE(seen) \
-	ASSERT_EQ(0, seen)
+	__EXPECT(0, "0", seen, #seen, ==, 1)
 
 /**
  * ASSERT_STREQ(expected, seen)
@@ -448,7 +448,7 @@
  * EXPECT_EQ(expected, measured): expected == measured
  */
 #define EXPECT_EQ(expected, seen) \
-	__EXPECT(expected, seen, ==, 0)
+	__EXPECT(expected, #expected, seen, #seen, ==, 0)
 
 /**
  * EXPECT_NE(expected, seen)
@@ -459,7 +459,7 @@
  * EXPECT_NE(expected, measured): expected != measured
  */
 #define EXPECT_NE(expected, seen) \
-	__EXPECT(expected, seen, !=, 0)
+	__EXPECT(expected, #expected, seen, #seen, !=, 0)
 
 /**
  * EXPECT_LT(expected, seen)
@@ -470,7 +470,7 @@
  * EXPECT_LT(expected, measured): expected < measured
  */
 #define EXPECT_LT(expected, seen) \
-	__EXPECT(expected, seen, <, 0)
+	__EXPECT(expected, #expected, seen, #seen, <, 0)
 
 /**
  * EXPECT_LE(expected, seen)
@@ -481,7 +481,7 @@
  * EXPECT_LE(expected, measured): expected <= measured
  */
 #define EXPECT_LE(expected, seen) \
-	__EXPECT(expected, seen, <=, 0)
+	__EXPECT(expected, #expected, seen, #seen, <=, 0)
 
 /**
  * EXPECT_GT(expected, seen)
@@ -492,7 +492,7 @@
  * EXPECT_GT(expected, measured): expected > measured
  */
 #define EXPECT_GT(expected, seen) \
-	__EXPECT(expected, seen, >, 0)
+	__EXPECT(expected, #expected, seen, #seen, >, 0)
 
 /**
  * EXPECT_GE(expected, seen)
@@ -503,7 +503,7 @@
  * EXPECT_GE(expected, measured): expected >= measured
  */
 #define EXPECT_GE(expected, seen) \
-	__EXPECT(expected, seen, >=, 0)
+	__EXPECT(expected, #expected, seen, #seen, >=, 0)
 
 /**
  * EXPECT_NULL(seen)
@@ -513,7 +513,7 @@
  * EXPECT_NULL(measured): NULL == measured
  */
 #define EXPECT_NULL(seen) \
-	__EXPECT(NULL, seen, ==, 0)
+	__EXPECT(NULL, "NULL", seen, #seen, ==, 0)
 
 /**
  * EXPECT_TRUE(seen)
@@ -523,7 +523,7 @@
  * EXPECT_TRUE(measured): 0 != measured
  */
 #define EXPECT_TRUE(seen) \
-	EXPECT_NE(0, seen)
+	__EXPECT(0, "0", seen, #seen, !=, 0)
 
 /**
  * EXPECT_FALSE(seen)
@@ -533,7 +533,7 @@
  * EXPECT_FALSE(measured): 0 == measured
  */
 #define EXPECT_FALSE(seen) \
-	EXPECT_EQ(0, seen)
+	__EXPECT(0, "0", seen, #seen, ==, 0)
 
 /**
  * EXPECT_STREQ(expected, seen)
@@ -573,7 +573,7 @@
 	if (_metadata->passed && _metadata->step < 255) \
 		_metadata->step++;
 
-#define __EXPECT(_expected, _seen, _t, _assert) do { \
+#define __EXPECT(_expected, _expected_str, _seen, _seen_str, _t, _assert) do { \
 	/* Avoid multiple evaluation of the cases */ \
 	__typeof__(_expected) __exp = (_expected); \
 	__typeof__(_seen) __seen = (_seen); \
@@ -582,8 +582,8 @@
 		unsigned long long __exp_print = (uintptr_t)__exp; \
 		unsigned long long __seen_print = (uintptr_t)__seen; \
 		__TH_LOG("Expected %s (%llu) %s %s (%llu)", \
-			 #_expected, __exp_print, #_t, \
-			 #_seen, __seen_print); \
+			 _expected_str, __exp_print, #_t, \
+			 _seen_str, __seen_print); \
 		_metadata->passed = 0; \
 		/* Ensure the optional handler is triggered */ \
 		_metadata->trigger = 1; \
-- 
2.19.1

[PATCH 4.14 31/63] clk: imx6q: reset exclusive gates on init

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit f7542d817733f461258fd3a47d77da35b2d9fc81 ]

The exclusive gates may be set up in the wrong way by software running
before the clock driver comes up. In that case the exclusive setup is
locked in its initial state, as the complementary function can't be
activated without disabling the initial setup first.

To avoid this lock situation, reset the exclusive gates to the off
state and allow the kernel to provide the proper setup.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Dong Aisheng <Aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/imx/clk-imx6q.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/imx/clk-imx6q.c b/drivers/clk/imx/clk-imx6q.c
index 8d518ad5dc13..8eb93eb2f857 100644
--- a/drivers/clk/imx/clk-imx6q.c
+++ b/drivers/clk/imx/clk-imx6q.c
@@ -515,8 +515,12 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
 	 * lvds1_gate and lvds2_gate are pseudo-gates.  Both can be
 	 * independently configured as clock inputs or outputs.  We treat
 	 * the "output_enable" bit as a gate, even though it's really just
-	 * enabling clock output.
+	 * enabling clock output. Initially the gate bits are cleared, as
+	 * otherwise the exclusive configuration gets locked in the setup done
+	 * by software running before the clock driver, with no way to change
+	 * it.
 	 */
+	writel(readl(base + 0x160) & ~0x3c00, base + 0x160);
 	clk[IMX6QDL_CLK_LVDS1_GATE] = imx_clk_gate_exclusive("lvds1_gate", "lvds1_sel", base + 0x160, 10, BIT(12));
 	clk[IMX6QDL_CLK_LVDS2_GATE] = imx_clk_gate_exclusive("lvds2_gate", "lvds2_sel", base + 0x160, 11, BIT(13));
 
-- 
2.19.1

[PATCH 4.14 32/63] arm64: Fix minor issues with the dcache_by_line_op macro

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 33309ecda0070506c49182530abe7728850ebe78 ]

The dcache_by_line_op macro suffers from a couple of small problems:

First, the GAS directives that are currently being used rely on
assembler behavior that is not documented, and probably not guaranteed
to produce the correct behavior going forward. As a result, we end up
with some undefined symbols in cache.o:

$ nm arch/arm64/mm/cache.o
         ...
         U civac
         ...
         U cvac
         U cvap
         U cvau

This is due to the fact that the comparisons used to select the
operation type in the dcache_by_line_op macro are comparing symbols
not strings, and even though it seems that GAS is doing the right
thing here (undefined symbols by the same name are equal to each
other), it seems unwise to rely on this.

Second, when patching in a DC CVAP instruction on CPUs that support it,
the fallback path consists of a DC CVAU instruction which may be
affected by CPU errata that require ARM64_WORKAROUND_CLEAN_CACHE.

Solve these issues by unrolling the various maintenance routines and
using the conditional directives that are documented as operating on
strings. To avoid the complexity of nested alternatives, we move the
DC CVAP patching to __clean_dcache_area_pop, falling back to a branch
to __clean_dcache_area_poc if DCPOP is not supported by the CPU.

Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/assembler.h | 30 ++++++++++++++++++------------
 arch/arm64/mm/cache.S              |  3 +++
 2 files changed, 21 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
index 66aea4aa455d..02d73d83f0de 100644
--- a/arch/arm64/include/asm/assembler.h
+++ b/arch/arm64/include/asm/assembler.h
@@ -373,27 +373,33 @@ alternative_endif
  * 	size:		size of the region
  * 	Corrupts:	kaddr, size, tmp1, tmp2
  */
+	.macro __dcache_op_workaround_clean_cache, op, kaddr
+alternative_if_not ARM64_WORKAROUND_CLEAN_CACHE
+	dc	\op, \kaddr
+alternative_else
+	dc	civac, \kaddr
+alternative_endif
+	.endm
+
 	.macro dcache_by_line_op op, domain, kaddr, size, tmp1, tmp2
 	dcache_line_size \tmp1, \tmp2
 	add	\size, \kaddr, \size
 	sub	\tmp2, \tmp1, #1
 	bic	\kaddr, \kaddr, \tmp2
 9998:
-	.if	(\op == cvau || \op == cvac)
-alternative_if_not ARM64_WORKAROUND_CLEAN_CACHE
-	dc	\op, \kaddr
-alternative_else
-	dc	civac, \kaddr
-alternative_endif
-	.elseif	(\op == cvap)
-alternative_if ARM64_HAS_DCPOP
-	sys 3, c7, c12, 1, \kaddr	// dc cvap
-alternative_else
-	dc	cvac, \kaddr
-alternative_endif
+	.ifc	\op, cvau
+	__dcache_op_workaround_clean_cache \op, \kaddr
+	.else
+	.ifc	\op, cvac
+	__dcache_op_workaround_clean_cache \op, \kaddr
+	.else
+	.ifc	\op, cvap
+	sys	3, c7, c12, 1, \kaddr	// dc cvap
 	.else
 	dc	\op, \kaddr
 	.endif
+	.endif
+	.endif
 	add	\kaddr, \kaddr, \tmp1
 	cmp	\kaddr, \size
 	b.lo	9998b
diff --git a/arch/arm64/mm/cache.S b/arch/arm64/mm/cache.S
index 91464e7f77cc..c1e8f3c6ffd5 100644
--- a/arch/arm64/mm/cache.S
+++ b/arch/arm64/mm/cache.S
@@ -181,6 +181,9 @@ ENDPROC(__dma_clean_area)
  *	- size    - size in question
  */
 ENTRY(__clean_dcache_area_pop)
+	alternative_if_not ARM64_HAS_DCPOP
+	b	__clean_dcache_area_poc
+	alternative_else_nop_endif
 	dcache_by_line_op cvap, sy, x0, x1, x2, x3
 	ret
 ENDPIPROC(__clean_dcache_area_pop)
-- 
2.19.1

[PATCH 4.14 33/63] kconfig: fix file name and line number of warn_ignored_character()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 77c1c0fa8b1477c5799bdad65026ea5ff676da44 ]

Currently, warn_ignore_character() displays invalid file name and
line number.

The lexer should use current_file->name and yylineno, while the parser
should use zconf_curname() and zconf_lineno().

This difference comes from that the lexer is always going ahead
of the parser. The parser needs to look ahead one token to make a
shift/reduce decision, so the lexer is requested to scan more text
from the input file.

This commit fixes the warning message from warn_ignored_character().

[Test Code]

  ----(Kconfig begin)----
  /
  -----(Kconfig end)-----

[Output]

  Before the fix:

  <none>:0:warning: ignoring unsupported character '/'

  After the fix:

  Kconfig:1:warning: ignoring unsupported character '/'

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/kconfig/zconf.l | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/kconfig/zconf.l b/scripts/kconfig/zconf.l
index c410d257da06..6534dc5ac803 100644
--- a/scripts/kconfig/zconf.l
+++ b/scripts/kconfig/zconf.l
@@ -71,7 +71,7 @@ static void warn_ignored_character(char chr)
 {
 	fprintf(stderr,
 	        "%s:%d:warning: ignoring unsupported character '%c'\n",
-	        zconf_curname(), zconf_lineno(), chr);
+	        current_file->name, yylineno, chr);
 }
 %}
 
-- 
2.19.1

[PATCH 4.14 34/63] kconfig: fix memory leak when EOF is encountered in quotation

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit fbac5977d81cb2b2b7e37b11c459055d9585273c ]

An unterminated string literal followed by new line is passed to the
parser (with "multi-line strings not supported" warning shown), then
handled properly there.

On the other hand, an unterminated string literal at end of file is
never passed to the parser, then results in memory leak.

[Test Code]

  ----------(Kconfig begin)----------
  source "Kconfig.inc"

  config A
          bool "a"
  -----------(Kconfig end)-----------

  --------(Kconfig.inc begin)--------
  config B
          bool "b\No new line at end of file
  ---------(Kconfig.inc end)---------

[Summary from Valgrind]

  Before the fix:

    LEAK SUMMARY:
       definitely lost: 16 bytes in 1 blocks
       ...

  After the fix:

    LEAK SUMMARY:
       definitely lost: 0 bytes in 0 blocks
       ...

Eliminate the memory leak path by handling this case. Of course, such
a Kconfig file is wrong already, so I will add an error message later.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/kconfig/zconf.l | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/scripts/kconfig/zconf.l b/scripts/kconfig/zconf.l
index 6534dc5ac803..0c7800112ff5 100644
--- a/scripts/kconfig/zconf.l
+++ b/scripts/kconfig/zconf.l
@@ -191,6 +191,8 @@ n	[A-Za-z0-9_-]
 	}
 	<<EOF>>	{
 		BEGIN(INITIAL);
+		yylval.string = text;
+		return T_WORD_QUOTE;
 	}
 }
 
-- 
2.19.1

[PATCH 4.14 35/63] mmc: atmel-mci: do not assume idle after atmci_request_end

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit ae460c115b7aa50c9a36cf78fced07b27962c9d0 ]

On our AT91SAM9260 board we use the same sdio bus for wifi and for the
sd card slot. This caused the atmel-mci to give the following splat on
the serial console:

  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 538 at drivers/mmc/host/atmel-mci.c:859 atmci_send_command+0x24/0x44
  Modules linked in:
  CPU: 0 PID: 538 Comm: mmcqd/0 Not tainted 4.14.76 #14
  Hardware name: Atmel AT91SAM9
  [<c000fccc>] (unwind_backtrace) from [<c000d3dc>] (show_stack+0x10/0x14)
  [<c000d3dc>] (show_stack) from [<c0017644>] (__warn+0xd8/0xf4)
  [<c0017644>] (__warn) from [<c0017704>] (warn_slowpath_null+0x1c/0x24)
  [<c0017704>] (warn_slowpath_null) from [<c033bb9c>] (atmci_send_command+0x24/0x44)
  [<c033bb9c>] (atmci_send_command) from [<c033e984>] (atmci_start_request+0x1f4/0x2dc)
  [<c033e984>] (atmci_start_request) from [<c033f3b4>] (atmci_request+0xf0/0x164)
  [<c033f3b4>] (atmci_request) from [<c0327108>] (mmc_start_request+0x280/0x2d0)
  [<c0327108>] (mmc_start_request) from [<c032800c>] (mmc_start_areq+0x230/0x330)
  [<c032800c>] (mmc_start_areq) from [<c03366f8>] (mmc_blk_issue_rw_rq+0xc4/0x310)
  [<c03366f8>] (mmc_blk_issue_rw_rq) from [<c03372c4>] (mmc_blk_issue_rq+0x118/0x5ac)
  [<c03372c4>] (mmc_blk_issue_rq) from [<c033781c>] (mmc_queue_thread+0xc4/0x118)
  [<c033781c>] (mmc_queue_thread) from [<c002daf8>] (kthread+0x100/0x118)
  [<c002daf8>] (kthread) from [<c000a580>] (ret_from_fork+0x14/0x34)
  ---[ end trace 594371ddfa284bd6 ]---

This is:
  WARN_ON(host->cmd);

This was fixed on our board by letting atmci_request_end determine what
state we are in. Instead of unconditionally setting it to STATE_IDLE on
STATE_END_REQUEST.

Signed-off-by: Jonas Danielsson <jonas@orbital-systems.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mmc/host/atmel-mci.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 0a0ebf3a096d..c8a591d8a3d9 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1954,13 +1954,14 @@ static void atmci_tasklet_func(unsigned long priv)
 			}
 
 			atmci_request_end(host, host->mrq);
-			state = STATE_IDLE;
+			goto unlock; /* atmci_request_end() sets host->state */
 			break;
 		}
 	} while (state != prev_state);
 
 	host->state = state;
 
+unlock:
 	spin_unlock(&host->lock);
 }
 
-- 
2.19.1

[PATCH 4.14 36/63] btrfs: improve error handling of btrfs_add_link

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 1690dd41e0cb1dade80850ed8a3eb0121b96d22f ]

In the error handling block, err holds the return value of either
btrfs_del_root_ref() or btrfs_del_inode_ref() but it hasn't been checked
since it's introduction with commit fe66a05a0679 (Btrfs: improve error
handling for btrfs_insert_dir_item callers) in 2012.

If the error handling in the error handling fails, there's not much left
to do and the abort either happened earlier in the callees or is
necessary here.

So if one of btrfs_del_root_ref() or btrfs_del_inode_ref() failed, abort
the transaction, but still return the original code of the failure
stored in 'ret' as this will be reported to the user.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/btrfs/inode.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 909f7ea92e0b..7e288510fd2c 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -6594,14 +6594,19 @@ fail_dir_item:
 		err = btrfs_del_root_ref(trans, fs_info, key.objectid,
 					 root->root_key.objectid, parent_ino,
 					 &local_index, name, name_len);
-
+		if (err)
+			btrfs_abort_transaction(trans, err);
 	} else if (add_backref) {
 		u64 local_index;
 		int err;
 
 		err = btrfs_del_inode_ref(trans, root, name, name_len,
 					  ino, parent_ino, &local_index);
+		if (err)
+			btrfs_abort_transaction(trans, err);
 	}
+
+	/* Return the original error code */
 	return ret;
 }
 
-- 
2.19.1

[PATCH 4.14 37/63] tty/serial: do not free trasnmit buffer page under port lock

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit d72402145ace0697a6a9e8e75a3de5bf3375f78d ]

LKP has hit yet another circular locking dependency between uart
console drivers and debugobjects [1]:

     CPU0                                    CPU1

                                            rhltable_init()
                                             __init_work()
                                              debug_object_init
     uart_shutdown()                          /* db->lock */
      /* uart_port->lock */                    debug_print_object()
       free_page()                              printk()
                                                 call_console_drivers()
        debug_check_no_obj_freed()                /* uart_port->lock */
         /* db->lock */
          debug_print_object()

So there are two dependency chains:
	uart_port->lock -> db->lock
And
	db->lock -> uart_port->lock

This particular circular locking dependency can be addressed in several
ways:

a) One way would be to move debug_print_object() out of db->lock scope
   and, thus, break the db->lock -> uart_port->lock chain.
b) Another one would be to free() transmit buffer page out of db->lock
   in UART code; which is what this patch does.

It makes sense to apply a) and b) independently: there are too many things
going on behind free(), none of which depend on uart_port->lock.

The patch fixes transmit buffer page free() in uart_shutdown() and,
additionally, in uart_port_startup() (as was suggested by Dmitry Safonov).

[1] https://lore.kernel.org/lkml/20181211091154.GL23332@shao2-debian/T/#u
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Dmitry Safonov <dima@arista.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/serial_core.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 6db8844ef3ec..543d0f95f094 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -218,10 +218,15 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
 	if (!state->xmit.buf) {
 		state->xmit.buf = (unsigned char *) page;
 		uart_circ_clear(&state->xmit);
+		uart_port_unlock(uport, flags);
 	} else {
+		uart_port_unlock(uport, flags);
+		/*
+		 * Do not free() the page under the port lock, see
+		 * uart_shutdown().
+		 */
 		free_page(page);
 	}
-	uart_port_unlock(uport, flags);
 
 	retval = uport->ops->startup(uport);
 	if (retval == 0) {
@@ -281,6 +286,7 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
 	struct uart_port *uport = uart_port_check(state);
 	struct tty_port *port = &state->port;
 	unsigned long flags = 0;
+	char *xmit_buf = NULL;
 
 	/*
 	 * Set the TTY IO error marker
@@ -311,14 +317,18 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
 	tty_port_set_suspended(port, 0);
 
 	/*
-	 * Free the transmit buffer page.
+	 * Do not free() the transmit buffer page under the port lock since
+	 * this can create various circular locking scenarios. For instance,
+	 * console driver may need to allocate/free a debug object, which
+	 * can endup in printk() recursion.
 	 */
 	uart_port_lock(state, flags);
-	if (state->xmit.buf) {
-		free_page((unsigned long)state->xmit.buf);
-		state->xmit.buf = NULL;
-	}
+	xmit_buf = state->xmit.buf;
+	state->xmit.buf = NULL;
 	uart_port_unlock(uport, flags);
+
+	if (xmit_buf)
+		free_page((unsigned long)xmit_buf);
 }
 
 /**
-- 
2.19.1

[PATCH 4.14 38/63] perf intel-pt: Fix error with config term "pt=0"

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 1c6f709b9f96366cc47af23c05ecec9b8c0c392d ]

Users should never use 'pt=0', but if they do it may give a meaningless
error:

	$ perf record -e intel_pt/pt=0/u uname
	Error:
	The sys_perf_event_open() syscall returned with 22 (Invalid argument) for
	event (intel_pt/pt=0/u).

Fix that by forcing 'pt=1'.

Committer testing:

  # perf record -e intel_pt/pt=0/u uname
  Error:
  The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (intel_pt/pt=0/u).
  /bin/dmesg | grep -i perf may provide additional information.

  # perf record -e intel_pt/pt=0/u uname
  pt=0 doesn't make sense, forcing pt=1
  Linux
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.020 MB perf.data ]
  #

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/b7c5b4e5-9497-10e5-fd43-5f3e4a0fe51d@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/arch/x86/util/intel-pt.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/tools/perf/arch/x86/util/intel-pt.c b/tools/perf/arch/x86/util/intel-pt.c
index db0ba8caf5a2..ba8ecaf52200 100644
--- a/tools/perf/arch/x86/util/intel-pt.c
+++ b/tools/perf/arch/x86/util/intel-pt.c
@@ -524,10 +524,21 @@ static int intel_pt_validate_config(struct perf_pmu *intel_pt_pmu,
 				    struct perf_evsel *evsel)
 {
 	int err;
+	char c;
 
 	if (!evsel)
 		return 0;
 
+	/*
+	 * If supported, force pass-through config term (pt=1) even if user
+	 * sets pt=0, which avoids senseless kernel errors.
+	 */
+	if (perf_pmu__scan_file(intel_pt_pmu, "format/pt", "%c", &c) == 1 &&
+	    !(evsel->attr.config & 1)) {
+		pr_warning("pt=0 doesn't make sense, forcing pt=1\n");
+		evsel->attr.config |= 1;
+	}
+
 	err = intel_pt_val_config_term(intel_pt_pmu, "caps/cycle_thresholds",
 				       "cyc_thresh", "caps/psb_cyc",
 				       evsel->attr.config);
-- 
2.19.1

[PATCH 4.14 39/63] perf svghelper: Fix unchecked usage of strncpy()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 2f5302533f306d5ee87bd375aef9ca35b91762cb ]

The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.

In this specific case this would only happen if fgets() was buggy, as
its man page states that it should read one less byte than the size of
the destination buffer, so that it can put the nul byte at the end of
it, so it would never copy 255 non-nul chars, as fgets reads into the
orig buffer at most 254 non-nul chars and terminates it. But lets just
switch to strlcpy to keep the original intent and silence the gcc 8.2
warning.

This fixes this warning on an Alpine Linux Edge system with gcc 8.2:

  In function 'cpu_model',
      inlined from 'svg_cpu_box' at util/svghelper.c:378:2:
  util/svghelper.c:337:5: error: 'strncpy' output may be truncated copying 255 bytes from a string of length 255 [-Werror=stringop-truncation]
       strncpy(cpu_m, &buf[13], 255);
       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Fixes: f48d55ce7871 ("perf: Add a SVG helper library file")
Link: https://lkml.kernel.org/n/tip-xzkoo0gyr56gej39ltivuh9g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/svghelper.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/svghelper.c b/tools/perf/util/svghelper.c
index 1cbada2dc6be..f735ee038713 100644
--- a/tools/perf/util/svghelper.c
+++ b/tools/perf/util/svghelper.c
@@ -334,7 +334,7 @@ static char *cpu_model(void)
 	if (file) {
 		while (fgets(buf, 255, file)) {
 			if (strstr(buf, "model name")) {
-				strncpy(cpu_m, &buf[13], 255);
+				strlcpy(cpu_m, &buf[13], 255);
 				break;
 			}
 		}
-- 
2.19.1

[PATCH 4.14 40/63] perf parse-events: Fix unchecked usage of strncpy()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit bd8d57fb7e25e9fcf67a9eef5fa13aabe2016e07 ]

The strncpy() function may leave the destination string buffer
unterminated, better use strlcpy() that we have a __weak fallback
implementation for systems without it.

This fixes this warning on an Alpine Linux Edge system with gcc 8.2:

  util/parse-events.c: In function 'print_symbol_events':
  util/parse-events.c:2465:4: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation]
      strncpy(name, syms->symbol, MAX_NAME_LEN);
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  In function 'print_symbol_events.constprop',
      inlined from 'print_events' at util/parse-events.c:2508:2:
  util/parse-events.c:2465:4: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation]
      strncpy(name, syms->symbol, MAX_NAME_LEN);
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  In function 'print_symbol_events.constprop',
      inlined from 'print_events' at util/parse-events.c:2511:2:
  util/parse-events.c:2465:4: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation]
      strncpy(name, syms->symbol, MAX_NAME_LEN);
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 947b4ad1d198 ("perf list: Fix max event string size")
Link: https://lkml.kernel.org/n/tip-b663e33bm6x8hrkie4uxh7u2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/perf/util/parse-events.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 53f620472151..d0b92d374ba9 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -2300,7 +2300,7 @@ restart:
 		if (!name_only && strlen(syms->alias))
 			snprintf(name, MAX_NAME_LEN, "%s OR %s", syms->symbol, syms->alias);
 		else
-			strncpy(name, syms->symbol, MAX_NAME_LEN);
+			strlcpy(name, syms->symbol, MAX_NAME_LEN);
 
 		evt_list[evt_i] = strdup(name);
 		if (evt_list[evt_i] == NULL)
-- 
2.19.1

[PATCH 4.14 41/63] netfilter: ipt_CLUSTERIP: check MAC address when duplicate config is set

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 06aa151ad1fc74a49b45336672515774a678d78d ]

If same destination IP address config is already existing, that config is
just used. MAC address also should be same.
However, there is no MAC address checking routine.
So that MAC address checking routine is added.

test commands:
   %iptables -A INPUT -p tcp -i lo -d 192.168.0.5 --dport 80 \
	   -j CLUSTERIP --new --hashmode sourceip \
	   --clustermac 01:00:5e:00:00:20 --total-nodes 2 --local-node 1
   %iptables -A INPUT -p tcp -i lo -d 192.168.0.5 --dport 80 \
	   -j CLUSTERIP --new --hashmode sourceip \
	   --clustermac 01:00:5e:00:00:21 --total-nodes 2 --local-node 1

After this patch, above commands are disallowed.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/netfilter/ipt_CLUSTERIP.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/ipv4/netfilter/ipt_CLUSTERIP.c b/net/ipv4/netfilter/ipt_CLUSTERIP.c
index cc7c9d67ac19..45f21489f515 100644
--- a/net/ipv4/netfilter/ipt_CLUSTERIP.c
+++ b/net/ipv4/netfilter/ipt_CLUSTERIP.c
@@ -492,7 +492,8 @@ static int clusterip_tg_check(const struct xt_tgchk_param *par)
 			if (IS_ERR(config))
 				return PTR_ERR(config);
 		}
-	}
+	} else if (memcmp(&config->clustermac, &cipinfo->clustermac, ETH_ALEN))
+		return -EINVAL;
 
 	ret = nf_ct_netns_get(par->net, par->family);
 	if (ret < 0) {
-- 
2.19.1

[PATCH 4.14 42/63] dm crypt: use u64 instead of sector_t to store iv_offset

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 8d683dcd65c037efc9fb38c696ec9b65b306e573 ]

The iv_offset in the mapping table of crypt target is a 64bit number when
IV algorithm is plain64, plain64be, essiv or benbi. It will be assigned to
iv_offset of struct crypt_config, cc_sector of struct convert_context and
iv_sector of struct dm_crypt_request. These structures members are defined
as a sector_t. But sector_t is 32bit when CONFIG_LBDAF is not set in 32bit
kernel. In this situation sector_t is not big enough to store the 64bit
iv_offset.

Here is a reproducer.
Prepare test image and device (loop is automatically allocated by cryptsetup):

  # dd if=/dev/zero of=tst.img bs=1M count=1
  # echo "tst"|cryptsetup open --type plain -c aes-xts-plain64 \
  --skip 500000000000000000 tst.img test

On 32bit system (use IV offset value that overflows to 64bit; CONFIG_LBDAF if off)
and device checksum is wrong:

  # dmsetup table test --showkeys
  0 2048 crypt aes-xts-plain64 dfa7cfe3c481f2239155739c42e539ae8f2d38f304dcc89d20b26f69daaf0933 3551657984 7:0 0

  # sha256sum /dev/mapper/test
  533e25c09176632b3794f35303488c4a8f3f965dffffa6ec2df347c168cb6c19 /dev/mapper/test

On 64bit system (and on 32bit system with the patch), table and checksum is now correct:

  # dmsetup table test --showkeys
  0 2048 crypt aes-xts-plain64 dfa7cfe3c481f2239155739c42e539ae8f2d38f304dcc89d20b26f69daaf0933 500000000000000000 7:0 0

  # sha256sum /dev/mapper/test
  5d16160f9d5f8c33d8051e65fdb4f003cc31cd652b5abb08f03aa6fce0df75fc /dev/mapper/test

Signed-off-by: AliOS system security <alios_sys_security@linux.alibaba.com>
Tested-and-Reviewed-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-crypt.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index c60d29d09687..2652ef68d58d 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -49,7 +49,7 @@ struct convert_context {
 	struct bio *bio_out;
 	struct bvec_iter iter_in;
 	struct bvec_iter iter_out;
-	sector_t cc_sector;
+	u64 cc_sector;
 	atomic_t cc_pending;
 	union {
 		struct skcipher_request *req;
@@ -81,7 +81,7 @@ struct dm_crypt_request {
 	struct convert_context *ctx;
 	struct scatterlist sg_in[4];
 	struct scatterlist sg_out[4];
-	sector_t iv_sector;
+	u64 iv_sector;
 };
 
 struct crypt_config;
@@ -172,7 +172,7 @@ struct crypt_config {
 		struct iv_lmk_private lmk;
 		struct iv_tcw_private tcw;
 	} iv_gen_private;
-	sector_t iv_offset;
+	u64 iv_offset;
 	unsigned int iv_size;
 	unsigned short int sector_size;
 	unsigned char sector_shift;
-- 
2.19.1

[PATCH 4.14 43/63] dm kcopyd: Fix bug causing workqueue stalls

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit d7e6b8dfc7bcb3f4f3a18313581f67486a725b52 ]

When using kcopyd to run callbacks through dm_kcopyd_do_callback() or
submitting copy jobs with a source size of 0, the jobs are pushed
directly to the complete_jobs list, which could be under processing by
the kcopyd thread. As a result, the kcopyd thread can continue running
completed jobs indefinitely, without releasing the CPU, as long as
someone keeps submitting new completed jobs through the aforementioned
paths. Processing of work items, queued for execution on the same CPU as
the currently running kcopyd thread, is thus stalled for excessive
amounts of time, hurting performance.

Running the following test, from the device mapper test suite [1],

  dmtest run --suite snapshot -n parallel_io_to_many_snaps_N

, with 8 active snapshots, we get, in dmesg, messages like the
following:

[68899.948523] BUG: workqueue lockup - pool cpus=0 node=0 flags=0x0 nice=0 stuck for 95s!
[68899.949282] Showing busy workqueues and worker pools:
[68899.949288] workqueue events: flags=0x0
[68899.949295]   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=2/256
[68899.949306]     pending: vmstat_shepherd, cache_reap
[68899.949331] workqueue mm_percpu_wq: flags=0x8
[68899.949337]   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256
[68899.949345]     pending: vmstat_update
[68899.949387] workqueue dm_bufio_cache: flags=0x8
[68899.949392]   pwq 4: cpus=2 node=0 flags=0x0 nice=0 active=1/256
[68899.949400]     pending: work_fn [dm_bufio]
[68899.949423] workqueue kcopyd: flags=0x8
[68899.949429]   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256
[68899.949437]     pending: do_work [dm_mod]
[68899.949452] workqueue kcopyd: flags=0x8
[68899.949458]   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=2/256
[68899.949466]     in-flight: 13:do_work [dm_mod]
[68899.949474]     pending: do_work [dm_mod]
[68899.949487] workqueue kcopyd: flags=0x8
[68899.949493]   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256
[68899.949501]     pending: do_work [dm_mod]
[68899.949515] workqueue kcopyd: flags=0x8
[68899.949521]   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256
[68899.949529]     pending: do_work [dm_mod]
[68899.949541] workqueue kcopyd: flags=0x8
[68899.949547]   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256
[68899.949555]     pending: do_work [dm_mod]
[68899.949568] pool 0: cpus=0 node=0 flags=0x0 nice=0 hung=95s workers=4 idle: 27130 27223 1084

Fix this by splitting the complete_jobs list into two parts: A user
facing part, named callback_jobs, and one used internally by kcopyd,
retaining the name complete_jobs. dm_kcopyd_do_callback() and
dispatch_job() now push their jobs to the callback_jobs list, which is
spliced to the complete_jobs list once, every time the kcopyd thread
wakes up. This prevents kcopyd from hogging the CPU indefinitely and
causing workqueue stalls.

Re-running the aforementioned test:

  * Workqueue stalls are eliminated
  * The maximum writing time among all targets is reduced from 09m37.10s
    to 06m04.85s and the total run time of the test is reduced from
    10m43.591s to 7m19.199s

[1] https://github.com/jthornber/device-mapper-test-suite

Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-kcopyd.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c
index d4b326914f06..b9d1897bcf5b 100644
--- a/drivers/md/dm-kcopyd.c
+++ b/drivers/md/dm-kcopyd.c
@@ -55,15 +55,17 @@ struct dm_kcopyd_client {
 	struct dm_kcopyd_throttle *throttle;
 
 /*
- * We maintain three lists of jobs:
+ * We maintain four lists of jobs:
  *
  * i)   jobs waiting for pages
  * ii)  jobs that have pages, and are waiting for the io to be issued.
- * iii) jobs that have completed.
+ * iii) jobs that don't need to do any IO and just run a callback
+ * iv) jobs that have completed.
  *
- * All three of these are protected by job_lock.
+ * All four of these are protected by job_lock.
  */
 	spinlock_t job_lock;
+	struct list_head callback_jobs;
 	struct list_head complete_jobs;
 	struct list_head io_jobs;
 	struct list_head pages_jobs;
@@ -622,6 +624,7 @@ static void do_work(struct work_struct *work)
 	struct dm_kcopyd_client *kc = container_of(work,
 					struct dm_kcopyd_client, kcopyd_work);
 	struct blk_plug plug;
+	unsigned long flags;
 
 	/*
 	 * The order that these are called is *very* important.
@@ -630,6 +633,10 @@ static void do_work(struct work_struct *work)
 	 * list.  io jobs call wake when they complete and it all
 	 * starts again.
 	 */
+	spin_lock_irqsave(&kc->job_lock, flags);
+	list_splice_tail_init(&kc->callback_jobs, &kc->complete_jobs);
+	spin_unlock_irqrestore(&kc->job_lock, flags);
+
 	blk_start_plug(&plug);
 	process_jobs(&kc->complete_jobs, kc, run_complete_job);
 	process_jobs(&kc->pages_jobs, kc, run_pages_job);
@@ -647,7 +654,7 @@ static void dispatch_job(struct kcopyd_job *job)
 	struct dm_kcopyd_client *kc = job->kc;
 	atomic_inc(&kc->nr_jobs);
 	if (unlikely(!job->source.count))
-		push(&kc->complete_jobs, job);
+		push(&kc->callback_jobs, job);
 	else if (job->pages == &zero_page_list)
 		push(&kc->io_jobs, job);
 	else
@@ -857,7 +864,7 @@ void dm_kcopyd_do_callback(void *j, int read_err, unsigned long write_err)
 	job->read_err = read_err;
 	job->write_err = write_err;
 
-	push(&kc->complete_jobs, job);
+	push(&kc->callback_jobs, job);
 	wake(kc);
 }
 EXPORT_SYMBOL(dm_kcopyd_do_callback);
@@ -887,6 +894,7 @@ struct dm_kcopyd_client *dm_kcopyd_client_create(struct dm_kcopyd_throttle *thro
 		return ERR_PTR(-ENOMEM);
 
 	spin_lock_init(&kc->job_lock);
+	INIT_LIST_HEAD(&kc->callback_jobs);
 	INIT_LIST_HEAD(&kc->complete_jobs);
 	INIT_LIST_HEAD(&kc->io_jobs);
 	INIT_LIST_HEAD(&kc->pages_jobs);
@@ -936,6 +944,7 @@ void dm_kcopyd_client_destroy(struct dm_kcopyd_client *kc)
 	/* Wait for completion of all jobs submitted by this client. */
 	wait_event(kc->destroyq, !atomic_read(&kc->nr_jobs));
 
+	BUG_ON(!list_empty(&kc->callback_jobs));
 	BUG_ON(!list_empty(&kc->complete_jobs));
 	BUG_ON(!list_empty(&kc->io_jobs));
 	BUG_ON(!list_empty(&kc->pages_jobs));
-- 
2.19.1

[PATCH 4.14 44/63] tools lib subcmd: Dont add the kernel sources to the include path

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit ece9804985b57e1ccd83b1fb6288520955a29d51 ]

At some point we decided not to directly include kernel sources files
when building tools/perf/, but when tools/lib/subcmd/ was forked from
tools/perf it somehow ended up adding it via these two lines in its
Makefile:

  CFLAGS += -I$(srctree)/include/uapi
  CFLAGS += -I$(srctree)/include

As $(srctree) points to the kernel sources.

Removing those lines and keeping just:

  CFLAGS += -I$(srctree)/tools/include/

Is enough to build tools/perf and tools/objtool.

This fixes the build when building from the sources in environments such
as the Android NDK crossbuilding from a fedora:26 system:

  subcmd-util.h:11:15: error: expected ',' or ';' before 'void'
   static inline void report(const char *prefix, const char *err, va_list params)
                 ^
  In file included from /git/perf/include/uapi/linux/stddef.h:2:0,
                   from /git/perf/include/uapi/linux/posix_types.h:5,
                   from /opt/android-ndk-r12b/platforms/android-24/arch-arm/usr/include/sys/types.h:36,
                   from /opt/android-ndk-r12b/platforms/android-24/arch-arm/usr/include/unistd.h:33,
                   from run-command.c:2:
  subcmd-util.h:18:17: error: '__no_instrument_function__' attribute applies only to functions

The /opt/android-ndk-r12b/platforms/android-24/arch-arm/usr/include/sys/types.h
file that includes linux/posix_types.h ends up getting the one in the kernel
sources causing the breakage. Fix it.

Test built tools/objtool/ too.

Reported-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 4b6ab94eabe4 ("perf subcmd: Create subcmd library")
Link: https://lkml.kernel.org/n/tip-5lhaoecrj12t0bqwvpiu14sm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/lib/subcmd/Makefile | 2 --
 1 file changed, 2 deletions(-)

diff --git a/tools/lib/subcmd/Makefile b/tools/lib/subcmd/Makefile
index 95563b8e1ad7..ed61fb3a46c0 100644
--- a/tools/lib/subcmd/Makefile
+++ b/tools/lib/subcmd/Makefile
@@ -36,8 +36,6 @@ endif
 CFLAGS += -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE
 
 CFLAGS += -I$(srctree)/tools/include/
-CFLAGS += -I$(srctree)/include/uapi
-CFLAGS += -I$(srctree)/include
 
 SUBCMD_IN := $(OUTPUT)libsubcmd-in.o
 
-- 
2.19.1

[PATCH 4.14 45/63] dm snapshot: Fix excessive memory usage and workqueue stalls

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 721b1d98fb517ae99ab3b757021cf81db41e67be ]

kcopyd has no upper limit to the number of jobs one can allocate and
issue. Under certain workloads this can lead to excessive memory usage
and workqueue stalls. For example, when creating multiple dm-snapshot
targets with a 4K chunk size and then writing to the origin through the
page cache. Syncing the page cache causes a large number of BIOs to be
issued to the dm-snapshot origin target, which itself issues an even
larger (because of the BIO splitting taking place) number of kcopyd
jobs.

Running the following test, from the device mapper test suite [1],

  dmtest run --suite snapshot -n many_snapshots_of_same_volume_N

, with 8 active snapshots, results in the kcopyd job slab cache growing
to 10G. Depending on the available system RAM this can lead to the OOM
killer killing user processes:

[463.492878] kthreadd invoked oom-killer: gfp_mask=0x6040c0(GFP_KERNEL|__GFP_COMP),
              nodemask=(null), order=1, oom_score_adj=0
[463.492894] kthreadd cpuset=/ mems_allowed=0
[463.492948] CPU: 7 PID: 2 Comm: kthreadd Not tainted 4.19.0-rc7 #3
[463.492950] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[463.492952] Call Trace:
[463.492964]  dump_stack+0x7d/0xbb
[463.492973]  dump_header+0x6b/0x2fc
[463.492987]  ? lockdep_hardirqs_on+0xee/0x190
[463.493012]  oom_kill_process+0x302/0x370
[463.493021]  out_of_memory+0x113/0x560
[463.493030]  __alloc_pages_slowpath+0xf40/0x1020
[463.493055]  __alloc_pages_nodemask+0x348/0x3c0
[463.493067]  cache_grow_begin+0x81/0x8b0
[463.493072]  ? cache_grow_begin+0x874/0x8b0
[463.493078]  fallback_alloc+0x1e4/0x280
[463.493092]  kmem_cache_alloc_node+0xd6/0x370
[463.493098]  ? copy_process.part.31+0x1c5/0x20d0
[463.493105]  copy_process.part.31+0x1c5/0x20d0
[463.493115]  ? __lock_acquire+0x3cc/0x1550
[463.493121]  ? __switch_to_asm+0x34/0x70
[463.493129]  ? kthread_create_worker_on_cpu+0x70/0x70
[463.493135]  ? finish_task_switch+0x90/0x280
[463.493165]  _do_fork+0xe0/0x6d0
[463.493191]  ? kthreadd+0x19f/0x220
[463.493233]  kernel_thread+0x25/0x30
[463.493235]  kthreadd+0x1bf/0x220
[463.493242]  ? kthread_create_on_cpu+0x90/0x90
[463.493248]  ret_from_fork+0x3a/0x50
[463.493279] Mem-Info:
[463.493285] active_anon:20631 inactive_anon:4831 isolated_anon:0
[463.493285]  active_file:80216 inactive_file:80107 isolated_file:435
[463.493285]  unevictable:0 dirty:51266 writeback:109372 unstable:0
[463.493285]  slab_reclaimable:31191 slab_unreclaimable:3483521
[463.493285]  mapped:526 shmem:4903 pagetables:1759 bounce:0
[463.493285]  free:33623 free_pcp:2392 free_cma:0
...
[463.493489] Unreclaimable slab info:
[463.493513] Name                      Used          Total
[463.493522] bio-6                   1028KB       1028KB
[463.493525] bio-5                   1028KB       1028KB
[463.493528] dm_snap_pending_exception     236783KB     243789KB
[463.493531] dm_exception              41KB         42KB
[463.493534] bio-4                   1216KB       1216KB
[463.493537] bio-3                 439396KB     439396KB
[463.493539] kcopyd_job           6973427KB    6973427KB
...
[463.494340] Out of memory: Kill process 1298 (ruby2.3) score 1 or sacrifice child
[463.494673] Killed process 1298 (ruby2.3) total-vm:435740kB, anon-rss:20180kB, file-rss:4kB, shmem-rss:0kB
[463.506437] oom_reaper: reaped process 1298 (ruby2.3), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB

Moreover, issuing a large number of kcopyd jobs results in kcopyd
hogging the CPU, while processing them. As a result, processing of work
items, queued for execution on the same CPU as the currently running
kcopyd thread, is stalled for long periods of time, hurting performance.
Running the aforementioned test we get, in dmesg, messages like the
following:

[67501.194592] BUG: workqueue lockup - pool cpus=4 node=0 flags=0x0 nice=0 stuck for 27s!
[67501.195586] Showing busy workqueues and worker pools:
[67501.195591] workqueue events: flags=0x0
[67501.195597]   pwq 8: cpus=4 node=0 flags=0x0 nice=0 active=1/256
[67501.195611]     pending: cache_reap
[67501.195641] workqueue mm_percpu_wq: flags=0x8
[67501.195645]   pwq 8: cpus=4 node=0 flags=0x0 nice=0 active=1/256
[67501.195656]     pending: vmstat_update
[67501.195682] workqueue kblockd: flags=0x18
[67501.195687]   pwq 5: cpus=2 node=0 flags=0x0 nice=-20 active=1/256
[67501.195698]     pending: blk_timeout_work
[67501.195753] workqueue kcopyd: flags=0x8
[67501.195757]   pwq 8: cpus=4 node=0 flags=0x0 nice=0 active=1/256
[67501.195768]     pending: do_work [dm_mod]
[67501.195802] workqueue kcopyd: flags=0x8
[67501.195806]   pwq 8: cpus=4 node=0 flags=0x0 nice=0 active=1/256
[67501.195817]     pending: do_work [dm_mod]
[67501.195834] workqueue kcopyd: flags=0x8
[67501.195838]   pwq 8: cpus=4 node=0 flags=0x0 nice=0 active=1/256
[67501.195848]     pending: do_work [dm_mod]
[67501.195881] workqueue kcopyd: flags=0x8
[67501.195885]   pwq 8: cpus=4 node=0 flags=0x0 nice=0 active=1/256
[67501.195896]     pending: do_work [dm_mod]
[67501.195920] workqueue kcopyd: flags=0x8
[67501.195924]   pwq 8: cpus=4 node=0 flags=0x0 nice=0 active=2/256
[67501.195935]     in-flight: 67:do_work [dm_mod]
[67501.195945]     pending: do_work [dm_mod]
[67501.195961] pool 8: cpus=4 node=0 flags=0x0 nice=0 hung=27s workers=3 idle: 129 23765

The root cause for these issues is the way dm-snapshot uses kcopyd. In
particular, the lack of an explicit or implicit limit to the maximum
number of in-flight COW jobs. The merging path is not affected because
it implicitly limits the in-flight kcopyd jobs to one.

Fix these issues by using a semaphore to limit the maximum number of
in-flight kcopyd jobs. We grab the semaphore before allocating a new
kcopyd job in start_copy() and start_full_bio() and release it after the
job finishes in copy_callback().

The initial semaphore value is configurable through a module parameter,
to allow fine tuning the maximum number of in-flight COW jobs. Setting
this parameter to zero initializes the semaphore to INT_MAX.

A default value of 2048 maximum in-flight kcopyd jobs was chosen. This
value was decided experimentally as a trade-off between memory
consumption, stalling the kernel's workqueues and maintaining a high
enough throughput.

Re-running the aforementioned test:

  * Workqueue stalls are eliminated
  * kcopyd's job slab cache uses a maximum of 130MB
  * The time taken by the test to write to the snapshot-origin target is
    reduced from 05m20.48s to 03m26.38s

[1] https://github.com/jthornber/device-mapper-test-suite

Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com>
Signed-off-by: Ilias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/md/dm-snap.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c
index a0613bd8ed00..b502debc6df3 100644
--- a/drivers/md/dm-snap.c
+++ b/drivers/md/dm-snap.c
@@ -19,6 +19,7 @@
 #include <linux/vmalloc.h>
 #include <linux/log2.h>
 #include <linux/dm-kcopyd.h>
+#include <linux/semaphore.h>
 
 #include "dm.h"
 
@@ -105,6 +106,9 @@ struct dm_snapshot {
 	/* The on disk metadata handler */
 	struct dm_exception_store *store;
 
+	/* Maximum number of in-flight COW jobs. */
+	struct semaphore cow_count;
+
 	struct dm_kcopyd_client *kcopyd_client;
 
 	/* Wait for events based on state_bits */
@@ -145,6 +149,19 @@ struct dm_snapshot {
 #define RUNNING_MERGE          0
 #define SHUTDOWN_MERGE         1
 
+/*
+ * Maximum number of chunks being copied on write.
+ *
+ * The value was decided experimentally as a trade-off between memory
+ * consumption, stalling the kernel's workqueues and maintaining a high enough
+ * throughput.
+ */
+#define DEFAULT_COW_THRESHOLD 2048
+
+static int cow_threshold = DEFAULT_COW_THRESHOLD;
+module_param_named(snapshot_cow_threshold, cow_threshold, int, 0644);
+MODULE_PARM_DESC(snapshot_cow_threshold, "Maximum number of chunks being copied on write");
+
 DECLARE_DM_KCOPYD_THROTTLE_WITH_MODULE_PARM(snapshot_copy_throttle,
 		"A percentage of time allocated for copy on write");
 
@@ -1189,6 +1206,8 @@ static int snapshot_ctr(struct dm_target *ti, unsigned int argc, char **argv)
 		goto bad_hash_tables;
 	}
 
+	sema_init(&s->cow_count, (cow_threshold > 0) ? cow_threshold : INT_MAX);
+
 	s->kcopyd_client = dm_kcopyd_client_create(&dm_kcopyd_throttle);
 	if (IS_ERR(s->kcopyd_client)) {
 		r = PTR_ERR(s->kcopyd_client);
@@ -1560,6 +1579,7 @@ static void copy_callback(int read_err, unsigned long write_err, void *context)
 		}
 		list_add(&pe->out_of_order_entry, lh);
 	}
+	up(&s->cow_count);
 }
 
 /*
@@ -1583,6 +1603,7 @@ static void start_copy(struct dm_snap_pending_exception *pe)
 	dest.count = src.count;
 
 	/* Hand over to kcopyd */
+	down(&s->cow_count);
 	dm_kcopyd_copy(s->kcopyd_client, &src, 1, &dest, 0, copy_callback, pe);
 }
 
@@ -1602,6 +1623,7 @@ static void start_full_bio(struct dm_snap_pending_exception *pe,
 	pe->full_bio = bio;
 	pe->full_bio_end_io = bio->bi_end_io;
 
+	down(&s->cow_count);
 	callback_data = dm_kcopyd_prepare_callback(s->kcopyd_client,
 						   copy_callback, pe);
 
-- 
2.19.1

[PATCH 4.14 46/63] quota: Lock s_umount in exclusive mode for Q_XQUOTA{ON,OFF} quotactls.

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 41c4f85cdac280d356df1f483000ecec4a8868be ]

Commit 1fa5efe3622db58cb8c7b9a50665e9eb9a6c7e97 (ext4: Use generic helpers for quotaon
and quotaoff) made possible to call quotactl(Q_XQUOTAON/OFF) on ext4 filesystems
with sysfile quota support. This leads to calling dquot_enable/disable without s_umount
held in excl. mode, because quotactl_cmd_onoff checks only for Q_QUOTAON/OFF.

The following WARN_ON_ONCE triggers (in this case for dquot_enable, ext4, latest Linus' tree):

[  117.807056] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: quota,prjquota

[...]

[  155.036847] WARNING: CPU: 0 PID: 2343 at fs/quota/dquot.c:2469 dquot_enable+0x34/0xb9
[  155.036851] Modules linked in: quota_v2 quota_tree ipv6 af_packet joydev mousedev psmouse serio_raw pcspkr i2c_piix4 intel_agp intel_gtt e1000 ttm drm_kms_helper drm agpgart fb_sys_fops syscopyarea sysfillrect sysimgblt i2c_core input_leds kvm_intel kvm irqbypass qemu_fw_cfg floppy evdev parport_pc parport button crc32c_generic dm_mod ata_generic pata_acpi ata_piix libata loop ext4 crc16 mbcache jbd2 usb_storage usbcore sd_mod scsi_mod
[  155.036901] CPU: 0 PID: 2343 Comm: qctl Not tainted 4.20.0-rc6-00025-gf5d582777bcb #9
[  155.036903] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[  155.036911] RIP: 0010:dquot_enable+0x34/0xb9
[  155.036915] Code: 41 56 41 55 41 54 55 53 4c 8b 6f 28 74 02 0f 0b 4d 8d 7d 70 49 89 fc 89 cb 41 89 d6 89 f5 4c 89 ff e8 23 09 ea ff 85 c0 74 0a <0f> 0b 4c 89 ff e8 8b 09 ea ff 85 db 74 6a 41 8b b5 f8 00 00 00 0f
[  155.036918] RSP: 0018:ffffb09b00493e08 EFLAGS: 00010202
[  155.036922] RAX: 0000000000000001 RBX: 0000000000000008 RCX: 0000000000000008
[  155.036924] RDX: 0000000000000001 RSI: 0000000000000002 RDI: ffff9781b67cd870
[  155.036926] RBP: 0000000000000002 R08: 0000000000000000 R09: 61c8864680b583eb
[  155.036929] R10: ffffb09b00493e48 R11: ffffffffff7ce7d4 R12: ffff9781b7ee8d78
[  155.036932] R13: ffff9781b67cd800 R14: 0000000000000004 R15: ffff9781b67cd870
[  155.036936] FS:  00007fd813250b88(0000) GS:ffff9781ba000000(0000) knlGS:0000000000000000
[  155.036939] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  155.036942] CR2: 00007fd812ff61d6 CR3: 000000007c882000 CR4: 00000000000006b0
[  155.036951] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  155.036953] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  155.036955] Call Trace:
[  155.037004]  dquot_quota_enable+0x8b/0xd0
[  155.037011]  kernel_quotactl+0x628/0x74e
[  155.037027]  ? do_mprotect_pkey+0x2a6/0x2cd
[  155.037034]  __x64_sys_quotactl+0x1a/0x1d
[  155.037041]  do_syscall_64+0x55/0xe4
[  155.037078]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  155.037105] RIP: 0033:0x7fd812fe1198
[  155.037109] Code: 02 77 0d 48 89 c1 48 c1 e9 3f 75 04 48 8b 04 24 48 83 c4 50 5b c3 48 83 ec 08 49 89 ca 48 63 d2 48 63 ff b8 b3 00 00 00 0f 05 <48> 89 c7 e8 c1 eb ff ff 5a c3 48 63 ff b8 bb 00 00 00 0f 05 48 89
[  155.037112] RSP: 002b:00007ffe8cd7b050 EFLAGS: 00000206 ORIG_RAX: 00000000000000b3
[  155.037116] RAX: ffffffffffffffda RBX: 00007ffe8cd7b148 RCX: 00007fd812fe1198
[  155.037119] RDX: 0000000000000000 RSI: 00007ffe8cd7cea9 RDI: 0000000000580102
[  155.037121] RBP: 00007ffe8cd7b0f0 R08: 000055fc8eba8a9d R09: 0000000000000000
[  155.037124] R10: 00007ffe8cd7b074 R11: 0000000000000206 R12: 00007ffe8cd7b168
[  155.037126] R13: 000055fc8eba8897 R14: 0000000000000000 R15: 0000000000000000
[  155.037131] ---[ end trace 210f864257175c51 ]---

and then the syscall proceeds without s_umount locking.

This patch locks the superblock ->s_umount sem. in exclusive mode for all Q_XQUOTAON/OFF
quotactls too in addition to Q_QUOTAON/OFF.

AFAICT, other than ext4, only xfs and ocfs2 are affected by this change.
The VFS will now call in xfs_quota_* functions with s_umount held, which wasn't the case
before. This looks good to me but I can not say for sure. Ext4 and ocfs2 where already
beeing called with s_umount exclusive via quota_quotaon/off which is basically the same.

Signed-off-by: Javier Barrio <javier.barrio.mart@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/quota/quota.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/quota/quota.c b/fs/quota/quota.c
index 3f02bab0db4e..a89c1f05b22e 100644
--- a/fs/quota/quota.c
+++ b/fs/quota/quota.c
@@ -793,7 +793,8 @@ static int quotactl_cmd_write(int cmd)
 /* Return true if quotactl command is manipulating quota on/off state */
 static bool quotactl_cmd_onoff(int cmd)
 {
-	return (cmd == Q_QUOTAON) || (cmd == Q_QUOTAOFF);
+	return (cmd == Q_QUOTAON) || (cmd == Q_QUOTAOFF) ||
+		 (cmd == Q_XQUOTAON) || (cmd == Q_XQUOTAOFF);
 }
 
 /*
-- 
2.19.1

[PATCH 4.14 47/63] clocksource/drivers/integrator-ap: Add missing of_node_put()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 5eb73c831171115d3b4347e1e7124a5a35d8086c ]

The function of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.

integrator_ap_timer_init_of() doesn't do that.  The pri_node and the
sec_node are used as an identifier to compare against the current
node, so we can directly drop the refcount after getting the node from
the path as it is not used as pointer.

By dropping the refcount right after getting it, a single variable is
needed instead of two.

Fix this by use a single variable and drop the refcount right after
of_find_node_by_path().

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clocksource/timer-integrator-ap.c | 25 +++++++++++++++--------
 1 file changed, 16 insertions(+), 9 deletions(-)

diff --git a/drivers/clocksource/timer-integrator-ap.c b/drivers/clocksource/timer-integrator-ap.c
index 62d24690ba02..9701107806a7 100644
--- a/drivers/clocksource/timer-integrator-ap.c
+++ b/drivers/clocksource/timer-integrator-ap.c
@@ -181,8 +181,7 @@ static int __init integrator_ap_timer_init_of(struct device_node *node)
 	int irq;
 	struct clk *clk;
 	unsigned long rate;
-	struct device_node *pri_node;
-	struct device_node *sec_node;
+	struct device_node *alias_node;
 
 	base = of_io_request_and_map(node, 0, "integrator-timer");
 	if (IS_ERR(base))
@@ -204,7 +203,18 @@ static int __init integrator_ap_timer_init_of(struct device_node *node)
 		return err;
 	}
 
-	pri_node = of_find_node_by_path(path);
+	alias_node = of_find_node_by_path(path);
+
+	/*
+	 * The pointer is used as an identifier not as a pointer, we
+	 * can drop the refcount on the of__node immediately after
+	 * getting it.
+	 */
+	of_node_put(alias_node);
+
+	if (node == alias_node)
+		/* The primary timer lacks IRQ, use as clocksource */
+		return integrator_clocksource_init(rate, base);
 
 	err = of_property_read_string(of_aliases,
 				"arm,timer-secondary", &path);
@@ -213,14 +223,11 @@ static int __init integrator_ap_timer_init_of(struct device_node *node)
 		return err;
 	}
 
+	alias_node = of_find_node_by_path(path);
 
-	sec_node = of_find_node_by_path(path);
-
-	if (node == pri_node)
-		/* The primary timer lacks IRQ, use as clocksource */
-		return integrator_clocksource_init(rate, base);
+	of_node_put(alias_node);
 
-	if (node == sec_node) {
+	if (node == alias_node) {
 		/* The secondary timer will drive the clock event */
 		irq = irq_of_parse_and_map(node, 0);
 		return integrator_clockevent_init(rate, base, irq);
-- 
2.19.1

[PATCH 4.14 48/63] ALSA: bebob: fix model-id of unit for Apogee Ensemble

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 644b2e97405b0b74845e1d3c2b4fe4c34858062b ]

This commit fixes hard-coded model-id for an unit of Apogee Ensemble with
a correct value. This unit uses DM1500 ASIC produced ArchWave AG (formerly
known as BridgeCo AG).

I note that this model supports three modes in the number of data channels
in tx/rx streams; 8 ch pairs, 10 ch pairs, 18 ch pairs. The mode is
switched by Vendor-dependent AV/C command, like:

$ cd linux-firewire-utils
$ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0600000000 (8ch pairs)
$ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0601000000 (10ch pairs)
$ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0602000000 (18ch pairs)

When switching between different mode, the unit disappears from IEEE 1394
bus, then appears on the bus with different combination of stream formats.
In a mode of 18 ch pairs, available sampling rate is up to 96.0 kHz, else
up to 192.0 kHz.

$ ./hinawa-config-rom-printer /dev/fw1
{ 'bus-info': { 'adj': False,
                'bmc': True,
                'chip_ID': 21474898341,
                'cmc': True,
                'cyc_clk_acc': 100,
                'generation': 2,
                'imc': True,
                'isc': True,
                'link_spd': 2,
                'max_ROM': 1,
                'max_rec': 512,
                'name': '1394',
                'node_vendor_ID': 987,
                'pmc': False},
  'root-directory': [ ['HARDWARE_VERSION', 19],
                      [ 'NODE_CAPABILITIES',
                        { 'addressing': {'64': True, 'fix': True, 'prv': False},
                          'misc': {'int': False, 'ms': False, 'spt': True},
                          'state': { 'atn': False,
                                     'ded': False,
                                     'drq': True,
                                     'elo': False,
                                     'init': False,
                                     'lst': True,
                                     'off': False},
                          'testing': {'bas': False, 'ext': False}}],
                      ['VENDOR', 987],
                      ['DESCRIPTOR', 'Apogee Electronics'],
                      ['MODEL', 126702],
                      ['DESCRIPTOR', 'Ensemble'],
                      ['VERSION', 5297],
                      [ 'UNIT',
                        [ ['SPECIFIER_ID', 41005],
                          ['VERSION', 65537],
                          ['MODEL', 126702],
                          ['DESCRIPTOR', 'Ensemble']]],
                      [ 'DEPENDENT_INFO',
                        [ ['SPECIFIER_ID', 2037],
                          ['VERSION', 1],
                          [(58, 'IMMEDIATE'), 16777159],
                          [(59, 'IMMEDIATE'), 1048576],
                          [(60, 'IMMEDIATE'), 16777159],
                          [(61, 'IMMEDIATE'), 6291456]]]]}

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/firewire/bebob/bebob.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/firewire/bebob/bebob.c b/sound/firewire/bebob/bebob.c
index 93676354f87f..de4af8a41ff0 100644
--- a/sound/firewire/bebob/bebob.c
+++ b/sound/firewire/bebob/bebob.c
@@ -434,7 +434,7 @@ static const struct ieee1394_device_id bebob_id_table[] = {
 	/* Apogee Electronics, DA/AD/DD-16X (X-FireWire card) */
 	SND_BEBOB_DEV_ENTRY(VEN_APOGEE, 0x00010048, &spec_normal),
 	/* Apogee Electronics, Ensemble */
-	SND_BEBOB_DEV_ENTRY(VEN_APOGEE, 0x00001eee, &spec_normal),
+	SND_BEBOB_DEV_ENTRY(VEN_APOGEE, 0x01eeee, &spec_normal),
 	/* ESI, Quatafire610 */
 	SND_BEBOB_DEV_ENTRY(VEN_ESI, 0x00010064, &spec_normal),
 	/* AcousticReality, eARMasterOne */
-- 
2.19.1

[PATCH 4.14 49/63] sysfs: Disable lockdep for driver bind/unbind files

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 4f4b374332ec0ae9c738ff8ec9bed5cd97ff9adc ]

This is the much more correct fix for my earlier attempt at:

https://lkml.org/lkml/2018/12/10/118

Short recap:

- There's not actually a locking issue, it's just lockdep being a bit
  too eager to complain about a possible deadlock.

- Contrary to what I claimed the real problem is recursion on
  kn->count. Greg pointed me at sysfs_break_active_protection(), used
  by the scsi subsystem to allow a sysfs file to unbind itself. That
  would be a real deadlock, which isn't what's happening here. Also,
  breaking the active protection means we'd need to manually handle
  all the lifetime fun.

- With Rafael we discussed the task_work approach, which kinda works,
  but has two downsides: It's a functional change for a lockdep
  annotation issue, and it won't work for the bind file (which needs
  to get the errno from the driver load function back to userspace).

- Greg also asked why this never showed up: To hit this you need to
  unregister a 2nd driver from the unload code of your first driver. I
  guess only gpus do that. The bug has always been there, but only
  with a recent patch series did we add more locks so that lockdep
  built a chain from unbinding the snd-hda driver to the
  acpi_video_unregister call.

Full lockdep splat:

[12301.898799] ============================================
[12301.898805] WARNING: possible recursive locking detected
[12301.898811] 4.20.0-rc7+ #84 Not tainted
[12301.898815] --------------------------------------------
[12301.898821] bash/5297 is trying to acquire lock:
[12301.898826] 00000000f61c6093 (kn->count#39){++++}, at: kernfs_remove_by_name_ns+0x3b/0x80
[12301.898841] but task is already holding lock:
[12301.898847] 000000005f634021 (kn->count#39){++++}, at: kernfs_fop_write+0xdc/0x190
[12301.898856] other info that might help us debug this:
[12301.898862]  Possible unsafe locking scenario:
[12301.898867]        CPU0
[12301.898870]        ----
[12301.898874]   lock(kn->count#39);
[12301.898879]   lock(kn->count#39);
[12301.898883] *** DEADLOCK ***
[12301.898891]  May be due to missing lock nesting notation
[12301.898899] 5 locks held by bash/5297:
[12301.898903]  #0: 00000000cd800e54 (sb_writers#4){.+.+}, at: vfs_write+0x17f/0x1b0
[12301.898915]  #1: 000000000465e7c2 (&of->mutex){+.+.}, at: kernfs_fop_write+0xd3/0x190
[12301.898925]  #2: 000000005f634021 (kn->count#39){++++}, at: kernfs_fop_write+0xdc/0x190
[12301.898936]  #3: 00000000414ef7ac (&dev->mutex){....}, at: device_release_driver_internal+0x34/0x240
[12301.898950]  #4: 000000003218fbdf (register_count_mutex){+.+.}, at: acpi_video_unregister+0xe/0x40
[12301.898960] stack backtrace:
[12301.898968] CPU: 1 PID: 5297 Comm: bash Not tainted 4.20.0-rc7+ #84
[12301.898974] Hardware name: Hewlett-Packard HP EliteBook 8460p/161C, BIOS 68SCF Ver. F.01 03/11/2011
[12301.898982] Call Trace:
[12301.898989]  dump_stack+0x67/0x9b
[12301.898997]  __lock_acquire+0x6ad/0x1410
[12301.899003]  ? kernfs_remove_by_name_ns+0x3b/0x80
[12301.899010]  ? find_held_lock+0x2d/0x90
[12301.899017]  ? mutex_spin_on_owner+0xe4/0x150
[12301.899023]  ? find_held_lock+0x2d/0x90
[12301.899030]  ? lock_acquire+0x90/0x180
[12301.899036]  lock_acquire+0x90/0x180
[12301.899042]  ? kernfs_remove_by_name_ns+0x3b/0x80
[12301.899049]  __kernfs_remove+0x296/0x310
[12301.899055]  ? kernfs_remove_by_name_ns+0x3b/0x80
[12301.899060]  ? kernfs_name_hash+0xd/0x80
[12301.899066]  ? kernfs_find_ns+0x6c/0x100
[12301.899073]  kernfs_remove_by_name_ns+0x3b/0x80
[12301.899080]  bus_remove_driver+0x92/0xa0
[12301.899085]  acpi_video_unregister+0x24/0x40
[12301.899127]  i915_driver_unload+0x42/0x130 [i915]
[12301.899160]  i915_pci_remove+0x19/0x30 [i915]
[12301.899169]  pci_device_remove+0x36/0xb0
[12301.899176]  device_release_driver_internal+0x185/0x240
[12301.899183]  unbind_store+0xaf/0x180
[12301.899189]  kernfs_fop_write+0x104/0x190
[12301.899195]  __vfs_write+0x31/0x180
[12301.899203]  ? rcu_read_lock_sched_held+0x6f/0x80
[12301.899209]  ? rcu_sync_lockdep_assert+0x29/0x50
[12301.899216]  ? __sb_start_write+0x13c/0x1a0
[12301.899221]  ? vfs_write+0x17f/0x1b0
[12301.899227]  vfs_write+0xb9/0x1b0
[12301.899233]  ksys_write+0x50/0xc0
[12301.899239]  do_syscall_64+0x4b/0x180
[12301.899247]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[12301.899253] RIP: 0033:0x7f452ac7f7a4
[12301.899259] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00 00 8b 05 aa f0 2c 00 48 63 ff 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 55 53 48 89 d5 48 89 f3 48 83
[12301.899273] RSP: 002b:00007ffceafa6918 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[12301.899282] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f452ac7f7a4
[12301.899288] RDX: 000000000000000d RSI: 00005612a1abf7c0 RDI: 0000000000000001
[12301.899295] RBP: 00005612a1abf7c0 R08: 000000000000000a R09: 00005612a1c46730
[12301.899301] R10: 000000000000000a R11: 0000000000000246 R12: 000000000000000d
[12301.899308] R13: 0000000000000001 R14: 00007f452af4a740 R15: 000000000000000d

Looking around I've noticed that usb and i2c already handle similar
recursion problems, where a sysfs file can unbind the same type of
sysfs somewhere else in the hierarchy. Relevant commits are:

commit 356c05d58af05d582e634b54b40050c73609617b
Author: Alan Stern <stern@rowland.harvard.edu>
Date:   Mon May 14 13:30:03 2012 -0400

    sysfs: get rid of some lockdep false positives

commit e9b526fe704812364bca07edd15eadeba163ebfb
Author: Alexander Sverdlin <alexander.sverdlin@nsn.com>
Date:   Fri May 17 14:56:35 2013 +0200

    i2c: suppress lockdep warning on delete_device

Implement the same trick for driver bind/unbind.

v2: Put the macro into bus.c (Greg).

Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Vivek Gautam <vivek.gautam@codeaurora.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/bus.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 22a64fd3309b..1cf1460f8c90 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -33,6 +33,9 @@ static struct kset *system_kset;
 
 #define to_drv_attr(_attr) container_of(_attr, struct driver_attribute, attr)
 
+#define DRIVER_ATTR_IGNORE_LOCKDEP(_name, _mode, _show, _store) \
+	struct driver_attribute driver_attr_##_name =		\
+		__ATTR_IGNORE_LOCKDEP(_name, _mode, _show, _store)
 
 static int __must_check bus_rescan_devices_helper(struct device *dev,
 						void *data);
@@ -197,7 +200,7 @@ static ssize_t unbind_store(struct device_driver *drv, const char *buf,
 	bus_put(bus);
 	return err;
 }
-static DRIVER_ATTR_WO(unbind);
+static DRIVER_ATTR_IGNORE_LOCKDEP(unbind, S_IWUSR, NULL, unbind_store);
 
 /*
  * Manually attach a device to a driver.
@@ -233,7 +236,7 @@ static ssize_t bind_store(struct device_driver *drv, const char *buf,
 	bus_put(bus);
 	return err;
 }
-static DRIVER_ATTR_WO(bind);
+static DRIVER_ATTR_IGNORE_LOCKDEP(bind, S_IWUSR, NULL, bind_store);
 
 static ssize_t show_drivers_autoprobe(struct bus_type *bus, char *buf)
 {
-- 
2.19.1

[PATCH 4.14 50/63] IB/usnic: Fix potential deadlock

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 8036e90f92aae2784b855a0007ae2d8154d28b3c ]

Acquiring the rtnl lock while holding usdev_lock could result in a
deadlock.

For example:

usnic_ib_query_port()
| mutex_lock(&us_ibdev->usdev_lock)
 | ib_get_eth_speed()
  | rtnl_lock()

rtnl_lock()
| usnic_ib_netdevice_event()
 | mutex_lock(&us_ibdev->usdev_lock)

This commit moves the usdev_lock acquisition after the rtnl lock has been
released.

This is safe to do because usdev_lock is not protecting anything being
accessed in ib_get_eth_speed(). Hence, the correct order of holding locks
(rtnl -> usdev_lock) is not violated.

Signed-off-by: Parvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/usnic/usnic_ib_verbs.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/infiniband/hw/usnic/usnic_ib_verbs.c b/drivers/infiniband/hw/usnic/usnic_ib_verbs.c
index 3c3453d213dc..fdfa25059723 100644
--- a/drivers/infiniband/hw/usnic/usnic_ib_verbs.c
+++ b/drivers/infiniband/hw/usnic/usnic_ib_verbs.c
@@ -310,13 +310,16 @@ int usnic_ib_query_port(struct ib_device *ibdev, u8 port,
 
 	usnic_dbg("\n");
 
-	mutex_lock(&us_ibdev->usdev_lock);
 	if (ib_get_eth_speed(ibdev, port, &props->active_speed,
-			     &props->active_width)) {
-		mutex_unlock(&us_ibdev->usdev_lock);
+			     &props->active_width))
 		return -EINVAL;
-	}
 
+	/*
+	 * usdev_lock is acquired after (and not before) ib_get_eth_speed call
+	 * because acquiring rtnl_lock in ib_get_eth_speed, while holding
+	 * usdev_lock could lead to a deadlock.
+	 */
+	mutex_lock(&us_ibdev->usdev_lock);
 	/* props being zeroed by the caller, avoid zeroing it here */
 
 	props->lid = 0;
-- 
2.19.1

[PATCH 4.14 51/63] scsi: smartpqi: correct lun reset issues

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 2ba55c9851d74eb015a554ef69ddf2ef061d5780 ]

Problem:
The Linux kernel takes a logical volume offline after a LUN reset.  This is
generally accompanied by this message in the dmesg output:

Device offlined - not ready after error recovery

Root Cause:
The root cause is a "quirk" in the timeout handling in the Linux SCSI
layer. The Linux kernel places a 30-second timeout on most media access
commands (reads and writes) that it send to device drivers.  When a media
access command times out, the Linux kernel goes into error recovery mode
for the LUN that was the target of the command that timed out. Every
command that timed out is kept on a list inside of the Linux kernel to be
retried later. The kernel attempts to recover the command(s) that timed out
by issuing a LUN reset followed by a TEST UNIT READY. If the LUN reset and
TEST UNIT READY commands are successful, the kernel retries the command(s)
that timed out.

Each SCSI command issued by the kernel has a result field associated with
it. This field indicates the final result of the command (success or
error). When a command times out, the kernel places a value in this result
field indicating that the command timed out.

The "quirk" is that after the LUN reset and TEST UNIT READY commands are
completed, the kernel checks each command on the timed-out command list
before retrying it. If the result field is still "timed out", the kernel
treats that command as not having been successfully recovered for a
retry. If the number of commands that are in this state are greater than
two, the kernel takes the LUN offline.

Fix:
When our RAIDStack receives a LUN reset, it simply waits until all
outstanding commands complete. Generally, all of these outstanding commands
complete successfully. Therefore, the fix in the smartpqi driver is to
always set the command result field to indicate success when a request
completes successfully. This normally isn’t necessary because the result
field is always initialized to success when the command is submitted to the
driver. So when the command completes successfully, the result field is
left untouched. But in this case, the kernel changes the result field
behind the driver’s back and then expects the field to be changed by the
driver as the commands that timed-out complete.

Reviewed-by: Dave Carroll <david.carroll@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/smartpqi/smartpqi_init.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 83bdbd84eb01..b662f58203ac 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -2709,6 +2709,9 @@ static unsigned int pqi_process_io_intr(struct pqi_ctrl_info *ctrl_info,
 		switch (response->header.iu_type) {
 		case PQI_RESPONSE_IU_RAID_PATH_IO_SUCCESS:
 		case PQI_RESPONSE_IU_AIO_PATH_IO_SUCCESS:
+			if (io_request->scmd)
+				io_request->scmd->result = 0;
+			/* fall through */
 		case PQI_RESPONSE_IU_GENERAL_MANAGEMENT:
 			break;
 		case PQI_RESPONSE_IU_TASK_MANAGEMENT:
-- 
2.19.1

[PATCH 4.14 52/63] scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit e57b2945aa654e48f85a41e8917793c64ecb9de8 ]

We must free all irqs during shutdown, else kexec's 2nd kernel would hang
in pqi_wait_for_completion_io() as below:

Call trace:

 pqi_wait_for_completion_io
 pqi_submit_raid_request_synchronous.constprop.78+0x23c/0x310 [smartpqi]
 pqi_configure_events+0xec/0x1f8 [smartpqi]
 pqi_ctrl_init+0x814/0xca0 [smartpqi]
 pqi_pci_probe+0x400/0x46c [smartpqi]
 local_pci_probe+0x48/0xb0
 pci_device_probe+0x14c/0x1b0
 really_probe+0x218/0x3fc
 driver_probe_device+0x70/0x140
 __driver_attach+0x11c/0x134
 bus_for_each_dev+0x70/0xc8
 driver_attach+0x30/0x38
 bus_add_driver+0x1f0/0x294
 driver_register+0x74/0x12c
 __pci_register_driver+0x64/0x70
 pqi_init+0xd0/0x10000 [smartpqi]
 do_one_initcall+0x60/0x1d8
 do_init_module+0x64/0x1f8
 load_module+0x10ec/0x1350
 __se_sys_finit_module+0xd4/0x100
 __arm64_sys_finit_module+0x28/0x34
 el0_svc_handler+0x104/0x160
 el0_svc+0x8/0xc

This happens only in the following combinations:

1. smartpqi is built as module, not built-in;
2. We have a disk connected to smartpqi card;
3. Both kexec's 1st and 2nd kernels use this disk as Rootfs' mount point.

Signed-off-by: Yanjiang Jin <yanjiang.jin@hxt-semitech.com>
Acked-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/smartpqi/smartpqi_init.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index b662f58203ac..bc15999f1c7c 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -6703,6 +6703,7 @@ static void pqi_shutdown(struct pci_dev *pci_dev)
 	 * storage.
 	 */
 	rc = pqi_flush_cache(ctrl_info, SHUTDOWN);
+	pqi_free_interrupts(ctrl_info);
 	pqi_reset(ctrl_info);
 	if (rc == 0)
 		return;
-- 
2.19.1

[PATCH 4.14 53/63] scsi: megaraid: fix out-of-bound array accesses

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit c7a082e4242fd8cd21a441071e622f87c16bdacc ]

UBSAN reported those with MegaRAID SAS-3 3108,

[   77.467308] UBSAN: Undefined behaviour in drivers/scsi/megaraid/megaraid_sas_fp.c:117:32
[   77.475402] index 255 is out of range for type 'MR_LD_SPAN_MAP [1]'
[   77.481677] CPU: 16 PID: 333 Comm: kworker/16:1 Not tainted 4.20.0-rc5+ #1
[   77.488556] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.50 06/01/2018
[   77.495791] Workqueue: events work_for_cpu_fn
[   77.500154] Call trace:
[   77.502610]  dump_backtrace+0x0/0x2c8
[   77.506279]  show_stack+0x24/0x30
[   77.509604]  dump_stack+0x118/0x19c
[   77.513098]  ubsan_epilogue+0x14/0x60
[   77.516765]  __ubsan_handle_out_of_bounds+0xfc/0x13c
[   77.521767]  mr_update_load_balance_params+0x150/0x158 [megaraid_sas]
[   77.528230]  MR_ValidateMapInfo+0x2cc/0x10d0 [megaraid_sas]
[   77.533825]  megasas_get_map_info+0x244/0x2f0 [megaraid_sas]
[   77.539505]  megasas_init_adapter_fusion+0x9b0/0xf48 [megaraid_sas]
[   77.545794]  megasas_init_fw+0x1ab4/0x3518 [megaraid_sas]
[   77.551212]  megasas_probe_one+0x2c4/0xbe0 [megaraid_sas]
[   77.556614]  local_pci_probe+0x7c/0xf0
[   77.560365]  work_for_cpu_fn+0x34/0x50
[   77.564118]  process_one_work+0x61c/0xf08
[   77.568129]  worker_thread+0x534/0xa70
[   77.571882]  kthread+0x1c8/0x1d0
[   77.575114]  ret_from_fork+0x10/0x1c

[   89.240332] UBSAN: Undefined behaviour in drivers/scsi/megaraid/megaraid_sas_fp.c:117:32
[   89.248426] index 255 is out of range for type 'MR_LD_SPAN_MAP [1]'
[   89.254700] CPU: 16 PID: 95 Comm: kworker/u130:0 Not tainted 4.20.0-rc5+ #1
[   89.261665] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.50 06/01/2018
[   89.268903] Workqueue: events_unbound async_run_entry_fn
[   89.274222] Call trace:
[   89.276680]  dump_backtrace+0x0/0x2c8
[   89.280348]  show_stack+0x24/0x30
[   89.283671]  dump_stack+0x118/0x19c
[   89.287167]  ubsan_epilogue+0x14/0x60
[   89.290835]  __ubsan_handle_out_of_bounds+0xfc/0x13c
[   89.295828]  MR_LdRaidGet+0x50/0x58 [megaraid_sas]
[   89.300638]  megasas_build_io_fusion+0xbb8/0xd90 [megaraid_sas]
[   89.306576]  megasas_build_and_issue_cmd_fusion+0x138/0x460 [megaraid_sas]
[   89.313468]  megasas_queue_command+0x398/0x3d0 [megaraid_sas]
[   89.319222]  scsi_dispatch_cmd+0x1dc/0x8a8
[   89.323321]  scsi_request_fn+0x8e8/0xdd0
[   89.327249]  __blk_run_queue+0xc4/0x158
[   89.331090]  blk_execute_rq_nowait+0xf4/0x158
[   89.335449]  blk_execute_rq+0xdc/0x158
[   89.339202]  __scsi_execute+0x130/0x258
[   89.343041]  scsi_probe_and_add_lun+0x2fc/0x1488
[   89.347661]  __scsi_scan_target+0x1cc/0x8c8
[   89.351848]  scsi_scan_channel.part.3+0x8c/0xc0
[   89.356382]  scsi_scan_host_selected+0x130/0x1f0
[   89.361002]  do_scsi_scan_host+0xd8/0xf0
[   89.364927]  do_scan_async+0x9c/0x320
[   89.368594]  async_run_entry_fn+0x138/0x420
[   89.372780]  process_one_work+0x61c/0xf08
[   89.376793]  worker_thread+0x13c/0xa70
[   89.380546]  kthread+0x1c8/0x1d0
[   89.383778]  ret_from_fork+0x10/0x1c

This is because when populating Driver Map using firmware raid map, all
non-existing VDs set their ldTgtIdToLd to 0xff, so it can be skipped later.

>From drivers/scsi/megaraid/megaraid_sas_base.c ,
memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS);

>From drivers/scsi/megaraid/megaraid_sas_fp.c ,
/* For non existing VDs, iterate to next VD*/
if (ld >= (MAX_LOGICAL_DRIVES_EXT - 1))
	continue;

However, there are a few places that failed to skip those non-existing VDs
due to off-by-one errors. Then, those 0xff leaked into MR_LdRaidGet(0xff,
map) and triggered the out-of-bound accesses.

Fixes: 51087a8617fe ("megaraid_sas : Extended VD support")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/megaraid/megaraid_sas_fp.c     | 2 +-
 drivers/scsi/megaraid/megaraid_sas_fusion.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_fp.c b/drivers/scsi/megaraid/megaraid_sas_fp.c
index f2ffde430ec1..9a2a62e39e4c 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fp.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fp.c
@@ -1266,7 +1266,7 @@ void mr_update_load_balance_params(struct MR_DRV_RAID_MAP_ALL *drv_map,
 
 	for (ldCount = 0; ldCount < MAX_LOGICAL_DRIVES_EXT; ldCount++) {
 		ld = MR_TargetIdToLdGet(ldCount, drv_map);
-		if (ld >= MAX_LOGICAL_DRIVES_EXT) {
+		if (ld >= MAX_LOGICAL_DRIVES_EXT - 1) {
 			lbInfo[ldCount].loadBalanceFlag = 0;
 			continue;
 		}
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index 06a2e3d9fc5b..7be2b9e11332 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -2529,7 +2529,7 @@ static void megasas_build_ld_nonrw_fusion(struct megasas_instance *instance,
 		device_id < instance->fw_supported_vd_count)) {
 
 		ld = MR_TargetIdToLdGet(device_id, local_map_ptr);
-		if (ld >= instance->fw_supported_vd_count)
+		if (ld >= instance->fw_supported_vd_count - 1)
 			fp_possible = 0;
 		else {
 			raid = MR_LdRaidGet(ld, local_map_ptr);
-- 
2.19.1

[PATCH 4.14 54/63] ocfs2: fix panic due to unrecovered local alloc

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 532e1e54c8140188e192348c790317921cb2dc1c ]

mount.ocfs2 ignore the inconsistent error that journal is clean but
local alloc is unrecovered.  After mount, local alloc not empty, then
reserver cluster didn't alloc a new local alloc window, reserveration
map is empty(ocfs2_reservation_map.m_bitmap_len = 0), that triggered the
following panic.

This issue was reported at

  https://oss.oracle.com/pipermail/ocfs2-devel/2015-May/010854.html

and was advised to fixed during mount.  But this is a very unusual
inconsistent state, usually journal dirty flag should be cleared at the
last stage of umount until every other things go right.  We may need do
further debug to check that.  Any way to avoid possible futher
corruption, mount should be abort and fsck should be run.

  (mount.ocfs2,1765,1):ocfs2_load_local_alloc:353 ERROR: Local alloc hasn't been recovered!
  found = 6518, set = 6518, taken = 8192, off = 15912372
  ocfs2: Mounting device (202,64) on (node 0, slot 3) with ordered data mode.
  o2dlm: Joining domain 89CEAC63CC4F4D03AC185B44E0EE0F3F ( 0 1 2 3 4 5 6 8 ) 8 nodes
  ocfs2: Mounting device (202,80) on (node 0, slot 3) with ordered data mode.
  o2hb: Region 89CEAC63CC4F4D03AC185B44E0EE0F3F (xvdf) is now a quorum device
  o2net: Accepted connection from node yvwsoa17p (num 7) at 172.22.77.88:7777
  o2dlm: Node 7 joins domain 64FE421C8C984E6D96ED12C55FEE2435 ( 0 1 2 3 4 5 6 7 8 ) 9 nodes
  o2dlm: Node 7 joins domain 89CEAC63CC4F4D03AC185B44E0EE0F3F ( 0 1 2 3 4 5 6 7 8 ) 9 nodes
  ------------[ cut here ]------------
  kernel BUG at fs/ocfs2/reservations.c:507!
  invalid opcode: 0000 [#1] SMP
  Modules linked in: ocfs2 rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs fscache lockd grace ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sunrpc ipt_REJECT nf_reject_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 ovmapi ppdev parport_pc parport xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea acpi_cpufreq pcspkr i2c_piix4 i2c_core sg ext4 jbd2 mbcache2 sr_mod cdrom xen_blkfront pata_acpi ata_generic ata_piix floppy dm_mirror dm_region_hash dm_log dm_mod
  CPU: 0 PID: 4349 Comm: startWebLogic.s Not tainted 4.1.12-124.19.2.el6uek.x86_64 #2
  Hardware name: Xen HVM domU, BIOS 4.4.4OVM 09/06/2018
  task: ffff8803fb04e200 ti: ffff8800ea4d8000 task.ti: ffff8800ea4d8000
  RIP: 0010:[<ffffffffa05e96a8>]  [<ffffffffa05e96a8>] __ocfs2_resv_find_window+0x498/0x760 [ocfs2]
  Call Trace:
    ocfs2_resmap_resv_bits+0x10d/0x400 [ocfs2]
    ocfs2_claim_local_alloc_bits+0xd0/0x640 [ocfs2]
    __ocfs2_claim_clusters+0x178/0x360 [ocfs2]
    ocfs2_claim_clusters+0x1f/0x30 [ocfs2]
    ocfs2_convert_inline_data_to_extents+0x634/0xa60 [ocfs2]
    ocfs2_write_begin_nolock+0x1c6/0x1da0 [ocfs2]
    ocfs2_write_begin+0x13e/0x230 [ocfs2]
    generic_perform_write+0xbf/0x1c0
    __generic_file_write_iter+0x19c/0x1d0
    ocfs2_file_write_iter+0x589/0x1360 [ocfs2]
    __vfs_write+0xb8/0x110
    vfs_write+0xa9/0x1b0
    SyS_write+0x46/0xb0
    system_call_fastpath+0x18/0xd7
  Code: ff ff 8b 75 b8 39 75 b0 8b 45 c8 89 45 98 0f 84 e5 fe ff ff 45 8b 74 24 18 41 8b 54 24 1c e9 56 fc ff ff 85 c0 0f 85 48 ff ff ff <0f> 0b 48 8b 05 cf c3 de ff 48 ba 00 00 00 00 00 00 00 10 48 85
  RIP   __ocfs2_resv_find_window+0x498/0x760 [ocfs2]
   RSP <ffff8800ea4db668>
  ---[ end trace 566f07529f2edf3c ]---
  Kernel panic - not syncing: Fatal exception
  Kernel Offset: disabled

Link: http://lkml.kernel.org/r/20181121020023.3034-2-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Acked-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ocfs2/localalloc.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/fs/ocfs2/localalloc.c b/fs/ocfs2/localalloc.c
index fe0d1f9571bb..5d53d0d63d19 100644
--- a/fs/ocfs2/localalloc.c
+++ b/fs/ocfs2/localalloc.c
@@ -345,13 +345,18 @@ int ocfs2_load_local_alloc(struct ocfs2_super *osb)
 	if (num_used
 	    || alloc->id1.bitmap1.i_used
 	    || alloc->id1.bitmap1.i_total
-	    || la->la_bm_off)
-		mlog(ML_ERROR, "Local alloc hasn't been recovered!\n"
+	    || la->la_bm_off) {
+		mlog(ML_ERROR, "inconsistent detected, clean journal with"
+		     " unrecovered local alloc, please run fsck.ocfs2!\n"
 		     "found = %u, set = %u, taken = %u, off = %u\n",
 		     num_used, le32_to_cpu(alloc->id1.bitmap1.i_used),
 		     le32_to_cpu(alloc->id1.bitmap1.i_total),
 		     OCFS2_LOCAL_ALLOC(alloc)->la_bm_off);
 
+		status = -EINVAL;
+		goto bail;
+	}
+
 	osb->local_alloc_bh = alloc_bh;
 	osb->local_alloc_state = OCFS2_LA_ENABLED;
 
-- 
2.19.1

[PATCH 4.14 55/63] mm/page-writeback.c: dont break integrity writeback on ->writepage() error

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 3fa750dcf29e8606e3969d13d8e188cc1c0f511d ]

write_cache_pages() is used in both background and integrity writeback
scenarios by various filesystems.  Background writeback is mostly
concerned with cleaning a certain number of dirty pages based on various
mm heuristics.  It may not write the full set of dirty pages or wait for
I/O to complete.  Integrity writeback is responsible for persisting a set
of dirty pages before the writeback job completes.  For example, an
fsync() call must perform integrity writeback to ensure data is on disk
before the call returns.

write_cache_pages() unconditionally breaks out of its processing loop in
the event of a ->writepage() error.  This is fine for background
writeback, which had no strict requirements and will eventually come
around again.  This can cause problems for integrity writeback on
filesystems that might need to clean up state associated with failed page
writeouts.  For example, XFS performs internal delayed allocation
accounting before returning a ->writepage() error, where applicable.  If
the current writeback happens to be associated with an unmount and
write_cache_pages() completes the writeback prematurely due to error, the
filesystem is unmounted in an inconsistent state if dirty+delalloc pages
still exist.

To handle this problem, update write_cache_pages() to always process the
full set of pages for integrity writeback regardless of ->writepage()
errors.  Save the first encountered error and return it to the caller once
complete.  This facilitates XFS (or any other fs that expects integrity
writeback to process the entire set of dirty pages) to clean up its
internal state completely in the event of persistent mapping errors.
Background writeback continues to exit on the first error encountered.

[akpm@linux-foundation.org: fix typo in comment]
Link: http://lkml.kernel.org/r/20181116134304.32440-1-bfoster@redhat.com
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/page-writeback.c | 35 +++++++++++++++++++++--------------
 1 file changed, 21 insertions(+), 14 deletions(-)

diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 3175ac850a53..e001de5ac50c 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -2157,6 +2157,7 @@ int write_cache_pages(struct address_space *mapping,
 {
 	int ret = 0;
 	int done = 0;
+	int error;
 	struct pagevec pvec;
 	int nr_pages;
 	pgoff_t uninitialized_var(writeback_index);
@@ -2253,25 +2254,31 @@ continue_unlock:
 				goto continue_unlock;
 
 			trace_wbc_writepage(wbc, inode_to_bdi(mapping->host));
-			ret = (*writepage)(page, wbc, data);
-			if (unlikely(ret)) {
-				if (ret == AOP_WRITEPAGE_ACTIVATE) {
+			error = (*writepage)(page, wbc, data);
+			if (unlikely(error)) {
+				/*
+				 * Handle errors according to the type of
+				 * writeback. There's no need to continue for
+				 * background writeback. Just push done_index
+				 * past this page so media errors won't choke
+				 * writeout for the entire file. For integrity
+				 * writeback, we must process the entire dirty
+				 * set regardless of errors because the fs may
+				 * still have state to clear for each page. In
+				 * that case we continue processing and return
+				 * the first error.
+				 */
+				if (error == AOP_WRITEPAGE_ACTIVATE) {
 					unlock_page(page);
-					ret = 0;
-				} else {
-					/*
-					 * done_index is set past this page,
-					 * so media errors will not choke
-					 * background writeout for the entire
-					 * file. This has consequences for
-					 * range_cyclic semantics (ie. it may
-					 * not be suitable for data integrity
-					 * writeout).
-					 */
+					error = 0;
+				} else if (wbc->sync_mode != WB_SYNC_ALL) {
+					ret = error;
 					done_index = page->index + 1;
 					done = 1;
 					break;
 				}
+				if (!ret)
+					ret = error;
 			}
 
 			/*
-- 
2.19.1

[PATCH 4.14 56/63] mm/swap: use nr_node_ids for avail_lists in swap_info_struct

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 66f71da9dd38af17dc17209cdde7987d4679a699 ]

Since a2468cc9bfdf ("swap: choose swap device according to numa node"),
avail_lists field of swap_info_struct is changed to an array with
MAX_NUMNODES elements.  This made swap_info_struct size increased to 40KiB
and needs an order-4 page to hold it.

This is not optimal in that:
1 Most systems have way less than MAX_NUMNODES(1024) nodes so it
  is a waste of memory;
2 It could cause swapon failure if the swap device is swapped on
  after system has been running for a while, due to no order-4
  page is available as pointed out by Vasily Averin.

Solve the above two issues by using nr_node_ids(which is the actual
possible node number the running system has) for avail_lists instead of
MAX_NUMNODES.

nr_node_ids is unknown at compile time so can't be directly used when
declaring this array.  What I did here is to declare avail_lists as zero
element array and allocate space for it when allocating space for
swap_info_struct.  The reason why keep using array but not pointer is
plist_for_each_entry needs the field to be part of the struct, so pointer
will not work.

This patch is on top of Vasily Averin's fix commit.  I think the use of
kvzalloc for swap_info_struct is still needed in case nr_node_ids is
really big on some systems.

Link: http://lkml.kernel.org/r/20181115083847.GA11129@intel.com
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/swap.h | 11 ++++++++++-
 mm/swapfile.c        |  3 ++-
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/include/linux/swap.h b/include/linux/swap.h
index f02fb5db8914..4fd1ab9565ba 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -231,7 +231,6 @@ struct swap_info_struct {
 	unsigned long	flags;		/* SWP_USED etc: see above */
 	signed short	prio;		/* swap priority of this type */
 	struct plist_node list;		/* entry in swap_active_head */
-	struct plist_node avail_lists[MAX_NUMNODES];/* entry in swap_avail_heads */
 	signed char	type;		/* strange name for an index */
 	unsigned int	max;		/* extent of the swap_map */
 	unsigned char *swap_map;	/* vmalloc'ed array of usage counts */
@@ -272,6 +271,16 @@ struct swap_info_struct {
 					 */
 	struct work_struct discard_work; /* discard worker */
 	struct swap_cluster_list discard_clusters; /* discard clusters list */
+	struct plist_node avail_lists[0]; /*
+					   * entries in swap_avail_heads, one
+					   * entry per node.
+					   * Must be last as the number of the
+					   * array is nr_node_ids, which is not
+					   * a fixed value so have to allocate
+					   * dynamically.
+					   * And it has to be an array so that
+					   * plist_for_each_* can work.
+					   */
 };
 
 #ifdef CONFIG_64BIT
diff --git a/mm/swapfile.c b/mm/swapfile.c
index af3c4c5a0b4e..4f9e522643a2 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -2830,8 +2830,9 @@ static struct swap_info_struct *alloc_swap_info(void)
 	struct swap_info_struct *p;
 	unsigned int type;
 	int i;
+	int size = sizeof(*p) + nr_node_ids * sizeof(struct plist_node);
 
-	p = kvzalloc(sizeof(*p), GFP_KERNEL);
+	p = kvzalloc(size, GFP_KERNEL);
 	if (!p)
 		return ERR_PTR(-ENOMEM);
 
-- 
2.19.1

[PATCH 4.14 57/63] mm, proc: be more verbose about unstable VMA flags in /proc/<pid>/smaps

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

[ Upstream commit 7550c6079846a24f30d15ac75a941c8515dbedfb ]

Patch series "THP eligibility reporting via proc".

This series of three patches aims at making THP eligibility reporting much
more robust and long term sustainable.  The trigger for the change is a
regression report [2] and the long follow up discussion.  In short the
specific application didn't have good API to query whether a particular
mapping can be backed by THP so it has used VMA flags to workaround that.
These flags represent a deep internal state of VMAs and as such they
should be used by userspace with a great deal of caution.

A similar has happened for [3] when users complained that VM_MIXEDMAP is
no longer set on DAX mappings.  Again a lack of a proper API led to an
abuse.

The first patch in the series tries to emphasise that that the semantic of
flags might change and any application consuming those should be really
careful.

The remaining two patches provide a more suitable interface to address [2]
and provide a consistent API to query the THP status both for each VMA and
process wide as well.  [1]

http://lkml.kernel.org/r/20181120103515.25280-1-mhocko@kernel.org [2]
http://lkml.kernel.org/r/http://lkml.kernel.org/r/alpine.DEB.2.21.1809241054050.224429@chino.kir.corp.google.com
[3] http://lkml.kernel.org/r/20181002100531.GC4135@quack2.suse.cz

This patch (of 3):

Even though vma flags exported via /proc/<pid>/smaps are explicitly
documented to be not guaranteed for future compatibility the warning
doesn't go far enough because it doesn't mention semantic changes to those
flags.  And they are important as well because these flags are a deep
implementation internal to the MM code and the semantic might change at
any time.

Let's consider two recent examples:
http://lkml.kernel.org/r/20181002100531.GC4135@quack2.suse.cz
: commit e1fb4a086495 "dax: remove VM_MIXEDMAP for fsdax and device dax" has
: removed VM_MIXEDMAP flag from DAX VMAs. Now our testing shows that in the
: mean time certain customer of ours started poking into /proc/<pid>/smaps
: and looks at VMA flags there and if VM_MIXEDMAP is missing among the VMA
: flags, the application just fails to start complaining that DAX support is
: missing in the kernel.

http://lkml.kernel.org/r/alpine.DEB.2.21.1809241054050.224429@chino.kir.corp.google.com
: Commit 1860033237d4 ("mm: make PR_SET_THP_DISABLE immediately active")
: introduced a regression in that userspace cannot always determine the set
: of vmas where thp is ineligible.
: Userspace relies on the "nh" flag being emitted as part of /proc/pid/smaps
: to determine if a vma is eligible to be backed by hugepages.
: Previous to this commit, prctl(PR_SET_THP_DISABLE, 1) would cause thp to
: be disabled and emit "nh" as a flag for the corresponding vmas as part of
: /proc/pid/smaps.  After the commit, thp is disabled by means of an mm
: flag and "nh" is not emitted.
: This causes smaps parsing libraries to assume a vma is eligible for thp
: and ends up puzzling the user on why its memory is not backed by thp.

In both cases userspace was relying on a semantic of a specific VMA flag.
The primary reason why that happened is a lack of a proper interface.
While this has been worked on and it will be fixed properly, it seems that
our wording could see some refinement and be more vocal about semantic
aspect of these flags as well.

Link: http://lkml.kernel.org/r/20181211143641.3503-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Paul Oppenheimer <bepvte@gmail.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/filesystems/proc.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index adba21b5ada7..4cee34ce496e 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -494,7 +494,9 @@ manner. The codes are the following:
 
 Note that there is no guarantee that every flag and associated mnemonic will
 be present in all further kernel releases. Things get changed, the flags may
-be vanished or the reverse -- new added.
+be vanished or the reverse -- new added. Interpretation of their meaning
+might change in future as well. So each consumer of these flags has to
+follow each specific kernel version for the exact semantic.
 
 This file is only present if the CONFIG_MMU kernel configuration option is
 enabled.
-- 
2.19.1

[PATCH 4.14 58/63] nfs: fix a deadlock in nfs client initialization

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Scott Mayhew <smayhew@redhat.com>

commit c156618e15101a9cc8c815108fec0300a0ec6637 upstream.

The following deadlock can occur between a process waiting for a client
to initialize in while walking the client list during nfsv4 server trunking
detection and another process waiting for the nfs_clid_init_mutex so it
can initialize that client:

Process 1                               Process 2
---------                               ---------
spin_lock(&nn->nfs_client_lock);
list_add_tail(&CLIENTA->cl_share_link,
        &nn->nfs_client_list);
spin_unlock(&nn->nfs_client_lock);
                                        spin_lock(&nn->nfs_client_lock);
                                        list_add_tail(&CLIENTB->cl_share_link,
                                                &nn->nfs_client_list);
                                        spin_unlock(&nn->nfs_client_lock);
                                        mutex_lock(&nfs_clid_init_mutex);
                                        nfs41_walk_client_list(clp, result, cred);
                                        nfs_wait_client_init_complete(CLIENTA);
(waiting for nfs_clid_init_mutex)

Make sure nfs_match_client() only evaluates clients that have completed
initialization in order to prevent that deadlock.

This patch also fixes v4.0 trunking behavior by not marking the client
NFS_CS_READY until the clientid has been confirmed.

Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Qian Lu <luqia@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/nfs/client.c     |   11 +++++++++++
 fs/nfs/nfs4client.c |   17 +++++++++++++----
 2 files changed, 24 insertions(+), 4 deletions(-)

--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -291,12 +291,23 @@ static struct nfs_client *nfs_match_clie
 	const struct sockaddr *sap = data->addr;
 	struct nfs_net *nn = net_generic(data->net, nfs_net_id);
 
+again:
 	list_for_each_entry(clp, &nn->nfs_client_list, cl_share_link) {
 	        const struct sockaddr *clap = (struct sockaddr *)&clp->cl_addr;
 		/* Don't match clients that failed to initialise properly */
 		if (clp->cl_cons_state < 0)
 			continue;
 
+		/* If a client is still initializing then we need to wait */
+		if (clp->cl_cons_state > NFS_CS_READY) {
+			atomic_inc(&clp->cl_count);
+			spin_unlock(&nn->nfs_client_lock);
+			nfs_wait_client_init_complete(clp);
+			nfs_put_client(clp);
+			spin_lock(&nn->nfs_client_lock);
+			goto again;
+		}
+
 		/* Different NFS versions cannot share the same nfs_client */
 		if (clp->rpc_ops != data->nfs_mod->rpc_ops)
 			continue;
--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -404,15 +404,19 @@ struct nfs_client *nfs4_init_client(stru
 	if (error < 0)
 		goto error;
 
-	if (!nfs4_has_session(clp))
-		nfs_mark_client_ready(clp, NFS_CS_READY);
-
 	error = nfs4_discover_server_trunking(clp, &old);
 	if (error < 0)
 		goto error;
 
-	if (clp != old)
+	if (clp != old) {
 		clp->cl_preserve_clid = true;
+		/*
+		 * Mark the client as having failed initialization so other
+		 * processes walking the nfs_client_list in nfs_match_client()
+		 * won't try to use it.
+		 */
+		nfs_mark_client_ready(clp, -EPERM);
+	}
 	nfs_put_client(clp);
 	clear_bit(NFS_CS_TSM_POSSIBLE, &clp->cl_flags);
 	return old;
@@ -539,6 +543,9 @@ int nfs40_walk_client_list(struct nfs_cl
 	spin_lock(&nn->nfs_client_lock);
 	list_for_each_entry(pos, &nn->nfs_client_list, cl_share_link) {
 
+		if (pos == new)
+			goto found;
+
 		status = nfs4_match_client(pos, new, &prev, nn);
 		if (status < 0)
 			goto out_unlock;
@@ -559,6 +566,7 @@ int nfs40_walk_client_list(struct nfs_cl
 		 * way that a SETCLIENTID_CONFIRM to pos can succeed is
 		 * if new and pos point to the same server:
 		 */
+found:
 		atomic_inc(&pos->cl_count);
 		spin_unlock(&nn->nfs_client_lock);
 
@@ -572,6 +580,7 @@ int nfs40_walk_client_list(struct nfs_cl
 		case 0:
 			nfs4_swap_callback_idents(pos, new);
 			pos->cl_confirm = new->cl_confirm;
+			nfs_mark_client_ready(pos, NFS_CS_READY);
 
 			prev = NULL;
 			*result = pos;

[PATCH 4.14 59/63] ipmi:pci: Blacklist a Realtek "IPMI" device

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Corey Minyard <cminyard@mvista.com>

commit bc48fa1b9d3b04106055b27078da824cd209865a upstream.

Realtek has some sort of "Virtual" IPMI device on the PCI bus as a
KCS controller, but whatever it is, it's not one.  Ignore it if seen.

[ Commit 13d0b35c (ipmi_si: Move PCI setup to another file) from Linux
  4.15-rc1 has not been back ported, so the PCI code is still in
  `drivers/char/ipmi/ipmi_si_intf.c`, requiring to apply the commit
  manually.

  This fixes a 100 s boot delay on the HP EliteDesk 705 G4 MT with Linux
  4.14.94. ]

Reported-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/ipmi/ipmi_si_intf.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -2447,6 +2447,15 @@ static int ipmi_pci_probe_regspacing(str
 	return DEFAULT_REGSPACING;
 }
 
+static struct pci_device_id ipmi_pci_blacklist[] = {
+	/*
+	 * This is a "Virtual IPMI device", whatever that is.  It appears
+	 * as a KCS device by the class, but it is not one.
+	 */
+	{ PCI_VDEVICE(REALTEK, 0x816c) },
+	{ 0, }
+};
+
 static int ipmi_pci_probe(struct pci_dev *pdev,
 				    const struct pci_device_id *ent)
 {
@@ -2454,6 +2463,9 @@ static int ipmi_pci_probe(struct pci_dev
 	int class_type = pdev->class & PCI_ERMC_CLASSCODE_TYPE_MASK;
 	struct smi_info *info;
 
+	if (pci_match_id(ipmi_pci_blacklist, pdev))
+		return -ENODEV;
+
 	info = smi_info_alloc();
 	if (!info)
 		return -ENOMEM;

[PATCH 4.14 60/63] cifs: allow disabling insecure dialects in the config

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steve French <stfrench@microsoft.com>

commit 7420451f6a109f7f8f1bf283f34d08eba3259fb3 upstream.

allow disabling cifs (SMB1 ie vers=1.0) and vers=2.0 in the
config for the build of cifs.ko if want to always prevent mounting
with these less secure dialects.

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Jeremy Allison <jra@samba.org>
Cc: Alakesh Haloi <alakeshh@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/Kconfig   |   17 ++++++++++++++++-
 fs/cifs/connect.c |    9 +++++++++
 2 files changed, 25 insertions(+), 1 deletion(-)

--- a/fs/cifs/Kconfig
+++ b/fs/cifs/Kconfig
@@ -66,9 +66,24 @@ config CIFS_STATS2
 	  Unless you are a developer or are doing network performance analysis
 	  or tuning, say N.
 
+config CIFS_ALLOW_INSECURE_LEGACY
+	bool "Support legacy servers which use less secure dialects"
+	depends on CIFS
+	default y
+	help
+	  Modern dialects, SMB2.1 and later (including SMB3 and 3.1.1), have
+	  additional security features, including protection against
+	  man-in-the-middle attacks and stronger crypto hashes, so the use
+	  of legacy dialects (SMB1/CIFS and SMB2.0) is discouraged.
+
+	  Disabling this option prevents users from using vers=1.0 or vers=2.0
+	  on mounts with cifs.ko
+
+	  If unsure, say Y.
+
 config CIFS_WEAK_PW_HASH
 	bool "Support legacy servers which use weaker LANMAN security"
-	depends on CIFS
+	depends on CIFS && CIFS_ALLOW_INSECURE_LEGACY
 	help
 	  Modern CIFS servers including Samba and most Windows versions
 	  (since 1997) support stronger NTLM (and even NTLMv2 and Kerberos)
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1130,6 +1130,7 @@ cifs_parse_smb_version(char *value, stru
 	substring_t args[MAX_OPT_ARGS];
 
 	switch (match_token(value, cifs_smb_version_tokens, args)) {
+#ifdef CONFIG_CIFS_ALLOW_INSECURE_LEGACY
 	case Smb_1:
 		vol->ops = &smb1_operations;
 		vol->vals = &smb1_values;
@@ -1138,6 +1139,14 @@ cifs_parse_smb_version(char *value, stru
 		vol->ops = &smb20_operations;
 		vol->vals = &smb20_values;
 		break;
+#else
+	case Smb_1:
+		cifs_dbg(VFS, "vers=1.0 (cifs) mount not permitted when legacy dialects disabled\n");
+		return 1;
+	case Smb_20:
+		cifs_dbg(VFS, "vers=2.0 mount not permitted when legacy dialects disabled\n");
+		return 1;
+#endif /* CIFS_ALLOW_INSECURE_LEGACY */
 	case Smb_21:
 		vol->ops = &smb21_operations;
 		vol->vals = &smb21_values;

[PATCH 4.14 61/63] drm/i915/gvt: Fix mmap range check

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Zhenyu Wang <zhenyuw@linux.intel.com>

commit 51b00d8509dc69c98740da2ad07308b630d3eb7d upstream.

This is to fix missed mmap range check on vGPU bar2 region
and only allow to map vGPU allocated GMADDR range, which means
user space should support sparse mmap to get proper offset for
mmap vGPU aperture. And this takes care of actual pgoff in mmap
request as original code always does from beginning of vGPU
aperture.

Fixes: 659643f7d814 ("drm/i915/gvt/kvmgt: add vfio/mdev support to KVMGT")
Cc: "Monroy, Rodrigo Axel" <rodrigo.axel.monroy@intel.com>
Cc: "Orrala Contreras, Alfredo" <alfredo.orrala.contreras@intel.com>
Cc: stable@vger.kernel.org # v4.10+
Reviewed-by: Hang Yuan <hang.yuan@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/gvt/kvmgt.c |   21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/i915/gvt/kvmgt.c
+++ b/drivers/gpu/drm/i915/gvt/kvmgt.c
@@ -807,11 +807,18 @@ write_err:
 	return -EFAULT;
 }
 
+static inline bool intel_vgpu_in_aperture(struct intel_vgpu *vgpu,
+					  unsigned long off)
+{
+	return off >= vgpu_aperture_offset(vgpu) &&
+		off < vgpu_aperture_offset(vgpu) + vgpu_aperture_sz(vgpu);
+}
+
 static int intel_vgpu_mmap(struct mdev_device *mdev, struct vm_area_struct *vma)
 {
 	unsigned int index;
 	u64 virtaddr;
-	unsigned long req_size, pgoff = 0;
+	unsigned long req_size, pgoff, req_start;
 	pgprot_t pg_prot;
 	struct intel_vgpu *vgpu = mdev_get_drvdata(mdev);
 
@@ -829,7 +836,17 @@ static int intel_vgpu_mmap(struct mdev_d
 	pg_prot = vma->vm_page_prot;
 	virtaddr = vma->vm_start;
 	req_size = vma->vm_end - vma->vm_start;
-	pgoff = vgpu_aperture_pa_base(vgpu) >> PAGE_SHIFT;
+	pgoff = vma->vm_pgoff &
+		((1U << (VFIO_PCI_OFFSET_SHIFT - PAGE_SHIFT)) - 1);
+	req_start = pgoff << PAGE_SHIFT;
+
+	if (!intel_vgpu_in_aperture(vgpu, req_start))
+		return -EINVAL;
+	if (req_start + req_size >
+	    vgpu_aperture_offset(vgpu) + vgpu_aperture_sz(vgpu))
+		return -EINVAL;
+
+	pgoff = (gvt_aperture_pa_base(vgpu->gvt) >> PAGE_SHIFT) + pgoff;
 
 	return remap_pfn_range(vma, virtaddr, pgoff, req_size, pg_prot);
 }

[PATCH 4.14 62/63] PCI: dwc: Move interrupt acking into the proper callback

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marc Zyngier <marc.zyngier@arm.com>

commit 3f7bb2ec20ce07c02b2002349d256c91a463fcc5 upstream.

The write to the status register is really an ACK for the HW,
and should be treated as such by the driver. Let's move it to the
irq_ack() callback, which will prevent people from moving it around
in order to paper over other bugs.

Fixes: 8c934095fa2f ("PCI: dwc: Clear MSI interrupt status after it is handled,
not before")
Fixes: 7c5925afbc58 ("PCI: dwc: Move MSI IRQs allocation to IRQ domains
hierarchical API")
Link: https://lore.kernel.org/linux-pci/20181113225734.8026-1-marc.zyngier@arm.com/
Reported-by: Trent Piepho <tpiepho@impinj.com>
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Tested-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/dwc/pcie-designware-host.c |   15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

--- a/drivers/pci/dwc/pcie-designware-host.c
+++ b/drivers/pci/dwc/pcie-designware-host.c
@@ -45,8 +45,19 @@ static int dw_pcie_wr_own_conf(struct pc
 	return dw_pcie_write(pci->dbi_base + where, size, val);
 }
 
+static void dwc_irq_ack(struct irq_data *d)
+{
+	struct msi_desc *msi = irq_data_get_msi_desc(d);
+	struct pcie_port *pp = msi_desc_to_pci_sysdata(msi);
+	int pos = d->hwirq % 32;
+	int i = d->hwirq / 32;
+
+	dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_STATUS + i * 12, 4, BIT(pos));
+}
+
 static struct irq_chip dw_msi_irq_chip = {
 	.name = "PCI-MSI",
+	.irq_ack = dwc_irq_ack,
 	.irq_enable = pci_msi_unmask_irq,
 	.irq_disable = pci_msi_mask_irq,
 	.irq_mask = pci_msi_mask_irq,
@@ -72,8 +83,6 @@ irqreturn_t dw_handle_msi_irq(struct pci
 					    pos)) != 32) {
 			irq = irq_find_mapping(pp->irq_domain, i * 32 + pos);
 			generic_handle_irq(irq);
-			dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_STATUS + i * 12,
-					    4, 1 << pos);
 			pos++;
 		}
 	}
@@ -263,7 +272,7 @@ static struct msi_controller dw_pcie_msi
 static int dw_pcie_msi_map(struct irq_domain *domain, unsigned int irq,
 			   irq_hw_number_t hwirq)
 {
-	irq_set_chip_and_handler(irq, &dw_msi_irq_chip, handle_simple_irq);
+	irq_set_chip_and_handler(irq, &dw_msi_irq_chip, handle_edge_irq);
 	irq_set_chip_data(irq, domain->host_data);
 
 	return 0;

[PATCH 4.14 63/63] ipmi:ssif: Fix handling of multi-part return messages

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Corey Minyard <cminyard@mvista.com>

commit 7d6380cd40f7993f75c4bde5b36f6019237e8719 upstream.

The block number was not being compared right, it was off by one
when checking the response.

Some statistics wouldn't be incremented properly in some cases.

Check to see if that middle-part messages always have 31 bytes of
data.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org # 4.4
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/ipmi/ipmi_ssif.c |   25 +++++++++++++++++--------
 1 file changed, 17 insertions(+), 8 deletions(-)

--- a/drivers/char/ipmi/ipmi_ssif.c
+++ b/drivers/char/ipmi/ipmi_ssif.c
@@ -645,8 +645,9 @@ static void msg_done_handler(struct ssif
 
 		/* Remove the multi-part read marker. */
 		len -= 2;
+		data += 2;
 		for (i = 0; i < len; i++)
-			ssif_info->data[i] = data[i+2];
+			ssif_info->data[i] = data[i];
 		ssif_info->multi_len = len;
 		ssif_info->multi_pos = 1;
 
@@ -674,8 +675,19 @@ static void msg_done_handler(struct ssif
 		}
 
 		blocknum = data[0];
+		len--;
+		data++;
+
+		if (blocknum != 0xff && len != 31) {
+		    /* All blocks but the last must have 31 data bytes. */
+			result = -EIO;
+			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
+				pr_info("Received middle message <31\n");
 
-		if (ssif_info->multi_len + len - 1 > IPMI_MAX_MSG_LENGTH) {
+			goto continue_op;
+		}
+
+		if (ssif_info->multi_len + len > IPMI_MAX_MSG_LENGTH) {
 			/* Received message too big, abort the operation. */
 			result = -E2BIG;
 			if (ssif_info->ssif_debug & SSIF_DEBUG_MSG)
@@ -684,16 +696,14 @@ static void msg_done_handler(struct ssif
 			goto continue_op;
 		}
 
-		/* Remove the blocknum from the data. */
-		len--;
 		for (i = 0; i < len; i++)
-			ssif_info->data[i + ssif_info->multi_len] = data[i + 1];
+			ssif_info->data[i + ssif_info->multi_len] = data[i];
 		ssif_info->multi_len += len;
 		if (blocknum == 0xff) {
 			/* End of read */
 			len = ssif_info->multi_len;
 			data = ssif_info->data;
-		} else if (blocknum + 1 != ssif_info->multi_pos) {
+		} else if (blocknum != ssif_info->multi_pos) {
 			/*
 			 * Out of sequence block, just abort.  Block
 			 * numbers start at zero for the second block,
@@ -721,6 +731,7 @@ static void msg_done_handler(struct ssif
 		}
 	}
 
+ continue_op:
 	if (result < 0) {
 		ssif_inc_stat(ssif_info, receive_errors);
 	} else {
@@ -728,8 +739,6 @@ static void msg_done_handler(struct ssif
 		ssif_inc_stat(ssif_info, received_message_parts);
 	}
 
-
- continue_op:
 	if (ssif_info->ssif_debug & SSIF_DEBUG_STATE)
 		pr_info(PFX "DONE 1: state = %d, result=%d.\n",
 			ssif_info->ssif_state, result);

Re: [PATCH 4.14 00/63] 4.14.96-stable review

[shuah]

On 1/24/19 12:19 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.96 release.
> There are 63 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat Jan 26 19:01:15 UTC 2019.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.96-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 4.14 00/63] 4.14.96-stable review

[Naresh Kamboju]

On Fri, 25 Jan 2019 at 01:03, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.14.96 release.
> There are 63 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat Jan 26 19:01:15 UTC 2019.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.96-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

NOTE: Kselftest source have been updated to version 4.20

Summary
------------------------------------------------------------------------

kernel: 4.14.96-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: 32c758df374e897c0fe4dad050993758edadf997
git describe: v4.14.95-64-g32c758df374e
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.95-64-g32c758df374e

No regressions (compared to build v4.14.95)
------------------------------------------------------------------------

Fixes (compared to build v4.14.95)
------------------------------------------------------------------------
The test case fixes coming from kselftest version 4.20
  kselftest:
    * net_tls


Ran 22202 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* boot
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* spectre-meltdown-checker-test
* ltp-open-posix-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.14 00/63] 4.14.96-stable review

[Guenter Roeck]

On Thu, Jan 24, 2019 at 08:19:49PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.96 release.
> There are 63 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat Jan 26 19:01:15 UTC 2019.
> Anything received after that time might be too late.
> 
Build results:
	total: 172 pass: 172 fail: 0
Qemu test results:
	total: 328 pass: 328 fail: 0

Guenter

Re: [PATCH 4.14 00/63] 4.14.96-stable review

[Jon Hunter]

On 24/01/2019 19:19, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.96 release.
> There are 63 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat Jan 26 19:01:15 UTC 2019.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.96-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
All tests are passing for Tegra ...

Test results for stable-v4.14:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    14 tests:	14 pass, 0 fail

Linux version:	4.14.96-rc1-g32c758d
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.14 00/63] 4.14.96-stable review

[Jon Hunter]

On 24/01/2019 19:19, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.96 release.
> There are 63 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat Jan 26 19:01:15 UTC 2019.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.96-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
All tests are passing for Tegra ...

Test results for stable-v4.14:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    14 tests:	14 pass, 0 fail

Linux version:	4.14.96-rc1-g32c758d
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic