From: Anand Moon <linux.amoon@gmail.com>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
Kevin Hilman <khilman@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCHv3 0/2] Odroid c2 usb fixs
Date: Tue, 29 Jan 2019 10:25:19 +0000 [thread overview]
Message-ID: <20190129102521.4141-1-linux.amoon@gmail.com> (raw)
This is follow up on my previous patches.
Changes rebase on mainline: 5.0-rc4
[0] https://lore.kernel.org/patchwork/patch/1031243/
[1] https://lore.kernel.org/patchwork/patch/1031243/
changes depend on phy patch
[2] https://patchwork.kernel.org/patch/10777359/
As per Martin's suggestion and input I have tried to fix below issue.
Fixed the phy power issue on the usb port.
# cat /sys/kernel/debug/regulator/regulator_summary
regulator use open bypass opmode voltage current min max
---------------------------------------------------------------------------------------
regulator-dummy 5 4 0 unknown 0mV 0mA 0mV 0mV
c9100000.usb 1 0mA 0mV 0mV
c9100000.usb 1 0mA 0mV 0mV
c9000000.usb 1 0mA 0mV 0mV
c9000000.usb 1 0mA 0mV 0mV
P5V0 1 1 0 unknown 5000mV 0mA 5000mV 5000mV
USB_OTG_PWR 4 2 0 unknown 5000mV 0mA 5000mV 5000mV
phy-c0000020.phy.1 2 0mA 0mV 0mV
phy-c0000000.phy.0 2 0mA 0mV 0mV
# lsusb -t
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=dwc2/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 4, If 0, Class=Mass Storage, Driver=usb-storage, 480M
|__ Port 3: Dev 3, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 3: Dev 3, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 3: Dev 3, If 2, Class=Audio, Driver=, 480M
|__ Port 3: Dev 3, If 3, Class=Audio, Driver=, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc2/1p, 480M
Now hotpluing of usb device is working on odroid c2 boards.
TODO: need to initialize the otg usb port to accept usb device.
Any input are welcome
Best Regards
-Anand
Anand Moon (2):
ARM64: dts: meson-gxbb-odroidc2: Fix usb phy reset warning
ARM64: dts: meson-gxbb-odroidc2: Fix usb phy regulator power failed
warning
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
--
2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Anand Moon <linux.amoon@gmail.com>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Kevin Hilman <khilman@baylibre.com>,
Rob Herring <robh+dt@kernel.org>,
Jerome Brunet <jbrunet@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCHv3 0/2] Odroid c2 usb fixs
Date: Tue, 29 Jan 2019 10:25:19 +0000 [thread overview]
Message-ID: <20190129102521.4141-1-linux.amoon@gmail.com> (raw)
This is follow up on my previous patches.
Changes rebase on mainline: 5.0-rc4
[0] https://lore.kernel.org/patchwork/patch/1031243/
[1] https://lore.kernel.org/patchwork/patch/1031243/
changes depend on phy patch
[2] https://patchwork.kernel.org/patch/10777359/
As per Martin's suggestion and input I have tried to fix below issue.
Fixed the phy power issue on the usb port.
# cat /sys/kernel/debug/regulator/regulator_summary
regulator use open bypass opmode voltage current min max
---------------------------------------------------------------------------------------
regulator-dummy 5 4 0 unknown 0mV 0mA 0mV 0mV
c9100000.usb 1 0mA 0mV 0mV
c9100000.usb 1 0mA 0mV 0mV
c9000000.usb 1 0mA 0mV 0mV
c9000000.usb 1 0mA 0mV 0mV
P5V0 1 1 0 unknown 5000mV 0mA 5000mV 5000mV
USB_OTG_PWR 4 2 0 unknown 5000mV 0mA 5000mV 5000mV
phy-c0000020.phy.1 2 0mA 0mV 0mV
phy-c0000000.phy.0 2 0mA 0mV 0mV
# lsusb -t
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=dwc2/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 4, If 0, Class=Mass Storage, Driver=usb-storage, 480M
|__ Port 3: Dev 3, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 3: Dev 3, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 3: Dev 3, If 2, Class=Audio, Driver=, 480M
|__ Port 3: Dev 3, If 3, Class=Audio, Driver=, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc2/1p, 480M
Now hotpluing of usb device is working on odroid c2 boards.
TODO: need to initialize the otg usb port to accept usb device.
Any input are welcome
Best Regards
-Anand
Anand Moon (2):
ARM64: dts: meson-gxbb-odroidc2: Fix usb phy reset warning
ARM64: dts: meson-gxbb-odroidc2: Fix usb phy regulator power failed
warning
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Anand Moon <linux.amoon@gmail.com>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Kevin Hilman <khilman@baylibre.com>,
Rob Herring <robh+dt@kernel.org>,
Jerome Brunet <jbrunet@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCHv3 0/2] Odroid c2 usb fixs
Date: Tue, 29 Jan 2019 10:25:19 +0000 [thread overview]
Message-ID: <20190129102521.4141-1-linux.amoon@gmail.com> (raw)
This is follow up on my previous patches.
Changes rebase on mainline: 5.0-rc4
[0] https://lore.kernel.org/patchwork/patch/1031243/
[1] https://lore.kernel.org/patchwork/patch/1031243/
changes depend on phy patch
[2] https://patchwork.kernel.org/patch/10777359/
As per Martin's suggestion and input I have tried to fix below issue.
Fixed the phy power issue on the usb port.
# cat /sys/kernel/debug/regulator/regulator_summary
regulator use open bypass opmode voltage current min max
---------------------------------------------------------------------------------------
regulator-dummy 5 4 0 unknown 0mV 0mA 0mV 0mV
c9100000.usb 1 0mA 0mV 0mV
c9100000.usb 1 0mA 0mV 0mV
c9000000.usb 1 0mA 0mV 0mV
c9000000.usb 1 0mA 0mV 0mV
P5V0 1 1 0 unknown 5000mV 0mA 5000mV 5000mV
USB_OTG_PWR 4 2 0 unknown 5000mV 0mA 5000mV 5000mV
phy-c0000020.phy.1 2 0mA 0mV 0mV
phy-c0000000.phy.0 2 0mA 0mV 0mV
# lsusb -t
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=dwc2/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 1: Dev 4, If 0, Class=Mass Storage, Driver=usb-storage, 480M
|__ Port 3: Dev 3, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 3: Dev 3, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 3: Dev 3, If 2, Class=Audio, Driver=, 480M
|__ Port 3: Dev 3, If 3, Class=Audio, Driver=, 480M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc2/1p, 480M
Now hotpluing of usb device is working on odroid c2 boards.
TODO: need to initialize the otg usb port to accept usb device.
Any input are welcome
Best Regards
-Anand
Anand Moon (2):
ARM64: dts: meson-gxbb-odroidc2: Fix usb phy reset warning
ARM64: dts: meson-gxbb-odroidc2: Fix usb phy regulator power failed
warning
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
--
2.20.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next reply other threads:[~2019-01-29 10:25 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-29 10:25 Anand Moon [this message]
2019-01-29 10:25 ` [PATCHv3 0/2] Odroid c2 usb fixs Anand Moon
2019-01-29 10:25 ` Anand Moon
2019-01-29 10:25 ` [PATCHv3 1/2] ARM64: dts: meson-gxbb-odroidc2: Fix usb phy reset warning Anand Moon
2019-01-29 10:25 ` Anand Moon
2019-01-29 10:25 ` Anand Moon
2019-02-04 13:58 ` Martin Blumenstingl
2019-02-04 13:58 ` Martin Blumenstingl
2019-02-04 13:58 ` Martin Blumenstingl
2019-02-04 20:04 ` Anand Moon
2019-02-04 20:04 ` Anand Moon
2019-02-04 20:04 ` Anand Moon
2019-02-04 20:49 ` Martin Blumenstingl
2019-02-04 20:49 ` Martin Blumenstingl
2019-02-04 20:49 ` Martin Blumenstingl
2019-02-05 19:53 ` Anand Moon
2019-02-05 19:53 ` Anand Moon
2019-02-05 19:53 ` Anand Moon
2019-01-29 10:25 ` [PATCHv3 2/2] ARM64: dts: meson-gxbb-odroidc2: Fix usb phy regulator power failed warning Anand Moon
2019-01-29 10:25 ` Anand Moon
2019-01-29 10:25 ` Anand Moon
2019-02-04 14:06 ` Martin Blumenstingl
2019-02-04 14:06 ` Martin Blumenstingl
2019-02-04 14:06 ` Martin Blumenstingl
2019-02-04 20:05 ` Anand Moon
2019-02-04 20:05 ` Anand Moon
2019-02-04 20:05 ` Anand Moon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190129102521.4141-1-linux.amoon@gmail.com \
--to=linux.amoon@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.