* [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig
@ 2019-02-02 7:24 Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 01/27] arm: disable CONFIG_SERIAL_ISA Yang Zhong
` (28 more replies)
0 siblings, 29 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong
This patch set is part of Kconfig task, and our target is to make
all platform's code file configurable for Kconfig, which is suitable
for add "config XXX" for all platforms.
As for Kconfig patch set(RFC v5), please ref below thread:
http://lists.nongnu.org/archive/html/qemu-devel/2019-01/msg06466.html
Paolo and Thomas, i will have 9 days leave for Chinese new year from
next Monday, please help me take care this patch set and Kconfig patch
set. Many thanks!
The change list:
v1 --->v2
patch 7 : change the commit message for CONFIG_ARM_VIRT.(Thomas Huth)
non-rfc v5 --> v1:
patch 1 : update the commit message(Thomas Huth)
patch 2 : add ioport.o to ide isa and ide piix(Thomas Huth)
patch 7 : CONFIG_ARM_VIRT to replace CONFIG_VIRT(Thomas Huth)
patch 13: CONFIG_S390_CCW_VIRTIO is only for s390-virtio-ccw.o(Thomas Huth)
patch 23: CONFIG_MOXIESIM to replace CONFIG_MOXIE(Thomas Huth)
patch 24: CONFIG_OR1K_SIM to replace CONFIG_OPENRISC(Thomas Huth)
Paolo Bonzini (8):
arm: disable CONFIG_SERIAL_ISA
ide: split ioport registration to a separate file
vfio: move conditional up to hw/Makefile.objs
build: actually use CONFIG_PAM
hw/i386/Makefile.objs: Build pc_piix* and pc_q35 boards
hw/s390/Makefile.objs: Create new CONFIG_* variables for s390x boards
and devices
hw/i2c/Makefile.objs: Create new CONFIG_* variables for EEPROM and
ACPI controller
hw/vfio/Makefile.objs: Create new CONFIG_* variables for VFIO core and
PCI
Yang Zhong (11):
hw/pci-host/Makefile.objs: make CONFIGS clear for PCI EXPRESS
hw/arm/Makefile.objs: CONFIG_ARM_VIRT created for virt board
hw/nios2/Makefile.objs: Conditionally build nios2
hw/riscv/Makefile.objs: Create CONFIG_* for riscv boards
hw/sparc64/Makefile.objs: Create CONFIG_* for sparc64
hw/alpha/Makefile.objs: Create CONFIG_* for alpha
hw/cris/Makefile.objs: Create CONFIG_* for cris
hw/hppa/Makefile.objs: Create CONFIG_* for hppa
hw/moxie/Makefile.objs: Conditionally build moxie
hw/openrisc/Makefile.objs: Create CONFIG_* for openrisc
hw/tricore/Makefile.objs: Create CONFIG_* for tricore
Ákos Kovács (8):
hw/m68k/Makefile.objs: Conditionally build boards
hw/microblaze/Makefile.objs: Create configs for petalogix and xilinx
boards
hw/mips/Makefile.objs: Create CONFIG_* for r4k, malta, mipssim boards
hw/ppc/Makefile.objs: Build all boards conditinally with CONFIG_*
hw/sh4/Makefile.objs: New CONFIG_* varibales created for sh4 boards
and device
hw/sparc/Makefile.objs: CONFIG_* for sun4m and leon3 created
hw/lm32/Makefile.objs: Conditionally build lm32 and milkmyst
hw/xtensa/Makefile.objs: Build xtensa_sim and xtensa_fpga
conditionally
default-configs/alpha-softmmu.mak | 1 +
default-configs/arm-softmmu.mak | 9 ++--
default-configs/cris-softmmu.mak | 1 +
default-configs/hppa-softmmu.mak | 1 +
default-configs/i386-softmmu.mak | 7 ++-
default-configs/m68k-softmmu.mak | 2 +
default-configs/microblaze-softmmu.mak | 3 ++
default-configs/mips-softmmu-common.mak | 5 ++
default-configs/mips64el-softmmu.mak | 2 +-
default-configs/moxie-softmmu.mak | 1 +
default-configs/nios2-softmmu.mak | 1 +
default-configs/or1k-softmmu.mak | 1 +
default-configs/pci.mak | 4 +-
default-configs/ppc-softmmu.mak | 8 ++-
default-configs/ppc64-softmmu.mak | 1 +
default-configs/riscv32-softmmu.mak | 9 +++-
default-configs/riscv64-softmmu.mak | 9 +++-
default-configs/s390x-softmmu.mak | 6 ++-
default-configs/sh4-softmmu.mak | 2 +
default-configs/sh4eb-softmmu.mak | 2 +
default-configs/sparc-softmmu.mak | 2 +
default-configs/sparc64-softmmu.mak | 2 +
default-configs/tricore-softmmu.mak | 1 +
default-configs/xtensa-softmmu.mak | 3 ++
default-configs/xtensaeb-softmmu.mak | 3 ++
hw/Makefile.objs | 2 +-
hw/alpha/Makefile.objs | 2 +-
hw/arm/Makefile.objs | 3 +-
hw/cris/Makefile.objs | 2 +-
hw/hppa/Makefile.objs | 2 +-
hw/i2c/Makefile.objs | 5 +-
hw/i386/Makefile.objs | 4 +-
hw/ide/Makefile.objs | 4 +-
hw/ide/core.c | 25 ----------
hw/ide/ioport.c | 66 +++++++++++++++++++++++++
hw/lm32/Makefile.objs | 4 +-
hw/m68k/Makefile.objs | 4 +-
hw/microblaze/Makefile.objs | 6 +--
hw/mips/Makefile.objs | 5 +-
hw/moxie/Makefile.objs | 2 +-
hw/net/Makefile.objs | 4 +-
hw/nios2/Makefile.objs | 3 +-
hw/openrisc/Makefile.objs | 2 +-
hw/pci-host/Makefile.objs | 10 ++--
hw/ppc/Makefile.objs | 11 +++--
hw/riscv/Makefile.objs | 22 ++++-----
hw/s390x/Makefile.objs | 2 +-
hw/sh4/Makefile.objs | 4 +-
hw/sparc/Makefile.objs | 4 +-
hw/sparc64/Makefile.objs | 6 +--
hw/tricore/Makefile.objs | 2 +-
hw/vfio/Makefile.objs | 9 ++--
hw/xtensa/Makefile.objs | 4 +-
53 files changed, 208 insertions(+), 97 deletions(-)
create mode 100644 hw/ide/ioport.c
--
2.17.1
^ permalink raw reply [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 01/27] arm: disable CONFIG_SERIAL_ISA
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 02/27] ide: split ioport registration to a separate file Yang Zhong
` (27 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong
From: Paolo Bonzini <pbonzini@redhat.com>
ARM should not have an ISA bus, this device should not be enabled.
Kconfig allows to clean up the dependencies and remove CONFIG_ISA_BUS=y
from ARM, and then catches a contradiction between the hardcoded
CONFIG_SERIAL_ISA=y and CONFIG_ISA_BUS=n.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
default-configs/arm-softmmu.mak | 1 -
1 file changed, 1 deletion(-)
diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index be88870799..d7b540cb25 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -6,7 +6,6 @@ CONFIG_VGA=y
CONFIG_NAND=y
CONFIG_ECC=y
CONFIG_SERIAL=y
-CONFIG_SERIAL_ISA=y
CONFIG_PTIMER=y
CONFIG_SD=y
CONFIG_MAX7310=y
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 02/27] ide: split ioport registration to a separate file
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 01/27] arm: disable CONFIG_SERIAL_ISA Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 03/27] vfio: move conditional up to hw/Makefile.objs Yang Zhong
` (26 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong
From: Paolo Bonzini <pbonzini@redhat.com>
This is not needed on ARM, and brings in ISA bus code which is otherwise not
necessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
hw/ide/Makefile.objs | 4 +--
hw/ide/core.c | 25 -----------------
hw/ide/ioport.c | 66 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 68 insertions(+), 27 deletions(-)
create mode 100644 hw/ide/ioport.c
diff --git a/hw/ide/Makefile.objs b/hw/ide/Makefile.objs
index fc328ffbe8..a142add90e 100644
--- a/hw/ide/Makefile.objs
+++ b/hw/ide/Makefile.objs
@@ -1,8 +1,8 @@
common-obj-$(CONFIG_IDE_CORE) += core.o atapi.o
common-obj-$(CONFIG_IDE_QDEV) += qdev.o
common-obj-$(CONFIG_IDE_PCI) += pci.o
-common-obj-$(CONFIG_IDE_ISA) += isa.o
-common-obj-$(CONFIG_IDE_PIIX) += piix.o
+common-obj-$(CONFIG_IDE_ISA) += isa.o ioport.o
+common-obj-$(CONFIG_IDE_PIIX) += piix.o ioport.o
common-obj-$(CONFIG_IDE_CMD646) += cmd646.o
common-obj-$(CONFIG_IDE_MACIO) += macio.o
common-obj-$(CONFIG_IDE_MMIO) += mmio.o
diff --git a/hw/ide/core.c b/hw/ide/core.c
index c3d779db6e..84832008b8 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -2686,31 +2686,6 @@ void ide_exit(IDEState *s)
qemu_vfree(s->io_buffer);
}
-static const MemoryRegionPortio ide_portio_list[] = {
- { 0, 8, 1, .read = ide_ioport_read, .write = ide_ioport_write },
- { 0, 1, 2, .read = ide_data_readw, .write = ide_data_writew },
- { 0, 1, 4, .read = ide_data_readl, .write = ide_data_writel },
- PORTIO_END_OF_LIST(),
-};
-
-static const MemoryRegionPortio ide_portio2_list[] = {
- { 0, 1, 1, .read = ide_status_read, .write = ide_cmd_write },
- PORTIO_END_OF_LIST(),
-};
-
-void ide_init_ioport(IDEBus *bus, ISADevice *dev, int iobase, int iobase2)
-{
- /* ??? Assume only ISA and PCI configurations, and that the PCI-ISA
- bridge has been setup properly to always register with ISA. */
- isa_register_portio_list(dev, &bus->portio_list,
- iobase, ide_portio_list, bus, "ide");
-
- if (iobase2) {
- isa_register_portio_list(dev, &bus->portio2_list,
- iobase2, ide_portio2_list, bus, "ide");
- }
-}
-
static bool is_identify_set(void *opaque, int version_id)
{
IDEState *s = opaque;
diff --git a/hw/ide/ioport.c b/hw/ide/ioport.c
new file mode 100644
index 0000000000..a0b3c1f6a1
--- /dev/null
+++ b/hw/ide/ioport.c
@@ -0,0 +1,66 @@
+/*
+ * QEMU IDE disk and CD/DVD-ROM Emulator
+ *
+ * Copyright (c) 2003 Fabrice Bellard
+ * Copyright (c) 2006 Openedhand Ltd.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/hw.h"
+#include "hw/isa/isa.h"
+#include "qemu/error-report.h"
+#include "qemu/timer.h"
+#include "sysemu/sysemu.h"
+#include "sysemu/blockdev.h"
+#include "sysemu/dma.h"
+#include "hw/block/block.h"
+#include "sysemu/block-backend.h"
+#include "qapi/error.h"
+#include "qemu/cutils.h"
+#include "sysemu/replay.h"
+
+#include "hw/ide/internal.h"
+#include "trace.h"
+
+static const MemoryRegionPortio ide_portio_list[] = {
+ { 0, 8, 1, .read = ide_ioport_read, .write = ide_ioport_write },
+ { 0, 1, 2, .read = ide_data_readw, .write = ide_data_writew },
+ { 0, 1, 4, .read = ide_data_readl, .write = ide_data_writel },
+ PORTIO_END_OF_LIST(),
+};
+
+static const MemoryRegionPortio ide_portio2_list[] = {
+ { 0, 1, 1, .read = ide_status_read, .write = ide_cmd_write },
+ PORTIO_END_OF_LIST(),
+};
+
+void ide_init_ioport(IDEBus *bus, ISADevice *dev, int iobase, int iobase2)
+{
+ /* ??? Assume only ISA and PCI configurations, and that the PCI-ISA
+ bridge has been setup properly to always register with ISA. */
+ isa_register_portio_list(dev, &bus->portio_list,
+ iobase, ide_portio_list, bus, "ide");
+
+ if (iobase2) {
+ isa_register_portio_list(dev, &bus->portio2_list,
+ iobase2, ide_portio2_list, bus, "ide");
+ }
+}
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 03/27] vfio: move conditional up to hw/Makefile.objs
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 01/27] arm: disable CONFIG_SERIAL_ISA Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 02/27] ide: split ioport registration to a separate file Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 04/27] hw/pci-host/Makefile.objs: make CONFIGS clear for PCI EXPRESS Yang Zhong
` (25 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong
From: Paolo Bonzini <pbonzini@redhat.com>
Instead of wrapping the entire Makefile.objs with an ifeq/endif, just
include the directory only for Linux.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
hw/Makefile.objs | 2 +-
hw/vfio/Makefile.objs | 2 --
2 files changed, 1 insertion(+), 3 deletions(-)
diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index 39d882af6f..22dd211363 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -30,7 +30,7 @@ devices-dirs-$(CONFIG_SOFTMMU) += ssi/
devices-dirs-$(CONFIG_SOFTMMU) += timer/
devices-dirs-$(CONFIG_TPM) += tpm/
devices-dirs-$(CONFIG_SOFTMMU) += usb/
-devices-dirs-$(CONFIG_SOFTMMU) += vfio/
+devices-dirs-$(CONFIG_LINUX) += vfio/
devices-dirs-$(CONFIG_SOFTMMU) += virtio/
devices-dirs-$(CONFIG_SOFTMMU) += watchdog/
devices-dirs-$(CONFIG_SOFTMMU) += xen/
diff --git a/hw/vfio/Makefile.objs b/hw/vfio/Makefile.objs
index 8b3f664d85..91805893f7 100644
--- a/hw/vfio/Makefile.objs
+++ b/hw/vfio/Makefile.objs
@@ -1,4 +1,3 @@
-ifeq ($(CONFIG_LINUX), y)
obj-$(CONFIG_SOFTMMU) += common.o
obj-$(CONFIG_PCI) += pci.o pci-quirks.o display.o
obj-$(CONFIG_VFIO_CCW) += ccw.o
@@ -7,4 +6,3 @@ obj-$(CONFIG_VFIO_XGMAC) += calxeda-xgmac.o
obj-$(CONFIG_VFIO_AMD_XGBE) += amd-xgbe.o
obj-$(CONFIG_SOFTMMU) += spapr.o
obj-$(CONFIG_VFIO_AP) += ap.o
-endif
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 04/27] hw/pci-host/Makefile.objs: make CONFIGS clear for PCI EXPRESS
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (2 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 03/27] vfio: move conditional up to hw/Makefile.objs Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 05/27] build: actually use CONFIG_PAM Yang Zhong
` (24 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong, Michael S . Tsirkin
Change the CONFIGs for PCI EXPRESS and make module name more
clear for code files.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
default-configs/arm-softmmu.mak | 4 ++--
default-configs/i386-softmmu.mak | 2 +-
default-configs/mips64el-softmmu.mak | 2 +-
default-configs/pci.mak | 2 +-
default-configs/riscv32-softmmu.mak | 2 +-
default-configs/riscv64-softmmu.mak | 2 +-
hw/net/Makefile.objs | 4 ++--
hw/pci-host/Makefile.objs | 8 ++++----
8 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index d7b540cb25..32f4a4ac27 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -123,7 +123,7 @@ CONFIG_VERSATILE=y
CONFIG_VERSATILE_PCI=y
CONFIG_VERSATILE_I2C=y
-CONFIG_PCI_GENERIC=y
+CONFIG_PCI_EXPRESS_GENERIC_BRIDGE=y
CONFIG_VFIO_XGMAC=y
CONFIG_VFIO_AMD_XGBE=y
@@ -154,7 +154,7 @@ CONFIG_GPIO_KEY=y
CONFIG_MSF2=y
CONFIG_FW_CFG_DMA=y
CONFIG_XILINX_AXI=y
-CONFIG_PCI_DESIGNWARE=y
+CONFIG_PCI_EXPRESS_DESIGNWARE=y
CONFIG_STRONGARM=y
CONFIG_HIGHBANK=y
diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
index 64c998c4c8..2f919df346 100644
--- a/default-configs/i386-softmmu.mak
+++ b/default-configs/i386-softmmu.mak
@@ -47,7 +47,7 @@ CONFIG_ISA_TESTDEV=y
CONFIG_VMPORT=y
CONFIG_SGA=y
CONFIG_LPC_ICH9=y
-CONFIG_PCI_Q35=y
+CONFIG_PCI_EXPRESS_Q35=y
CONFIG_APIC=y
CONFIG_IOAPIC=y
CONFIG_PVPANIC=y
diff --git a/default-configs/mips64el-softmmu.mak b/default-configs/mips64el-softmmu.mak
index c2ae313f47..9eb1208b58 100644
--- a/default-configs/mips64el-softmmu.mak
+++ b/default-configs/mips64el-softmmu.mak
@@ -12,4 +12,4 @@ CONFIG_JAZZ_LED=y
CONFIG_VT82C686=y
CONFIG_MIPS_BOSTON=y
CONFIG_FITLOADER=y
-CONFIG_PCI_XILINX=y
+CONFIG_PCI_EXPRESS_XILINX=y
diff --git a/default-configs/pci.mak b/default-configs/pci.mak
index 6c7be12779..83738cbb65 100644
--- a/default-configs/pci.mak
+++ b/default-configs/pci.mak
@@ -22,7 +22,7 @@ CONFIG_MEGASAS_SCSI_PCI=y
CONFIG_MPTSAS_SCSI_PCI=y
CONFIG_RTL8139_PCI=y
CONFIG_E1000_PCI=y
-CONFIG_E1000E_PCI=y
+CONFIG_E1000E_PCI_EXPRESS=y
CONFIG_IDE_CORE=y
CONFIG_IDE_QDEV=y
CONFIG_IDE_PCI=y
diff --git a/default-configs/riscv32-softmmu.mak b/default-configs/riscv32-softmmu.mak
index c9c5971409..fbfd1d4e4b 100644
--- a/default-configs/riscv32-softmmu.mak
+++ b/default-configs/riscv32-softmmu.mak
@@ -8,7 +8,7 @@ CONFIG_VIRTIO_MMIO=y
CONFIG_CADENCE=y
-CONFIG_PCI_GENERIC=y
+CONFIG_PCI_EXPRESS_GENERIC_BRIDGE=y
CONFIG_VGA=y
CONFIG_VGA_PCI=y
diff --git a/default-configs/riscv64-softmmu.mak b/default-configs/riscv64-softmmu.mak
index c9c5971409..fbfd1d4e4b 100644
--- a/default-configs/riscv64-softmmu.mak
+++ b/default-configs/riscv64-softmmu.mak
@@ -8,7 +8,7 @@ CONFIG_VIRTIO_MMIO=y
CONFIG_CADENCE=y
-CONFIG_PCI_GENERIC=y
+CONFIG_PCI_EXPRESS_GENERIC_BRIDGE=y
CONFIG_VGA=y
CONFIG_VGA_PCI=y
diff --git a/hw/net/Makefile.objs b/hw/net/Makefile.objs
index fa461d4463..a43351aa04 100644
--- a/hw/net/Makefile.objs
+++ b/hw/net/Makefile.objs
@@ -7,8 +7,8 @@ common-obj-$(CONFIG_EEPRO100_PCI) += eepro100.o
common-obj-$(CONFIG_PCNET_PCI) += pcnet-pci.o
common-obj-$(CONFIG_PCNET_COMMON) += pcnet.o
common-obj-$(CONFIG_E1000_PCI) += e1000.o e1000x_common.o
-common-obj-$(CONFIG_E1000E_PCI) += net_tx_pkt.o net_rx_pkt.o
-common-obj-$(CONFIG_E1000E_PCI) += e1000e.o e1000e_core.o e1000x_common.o
+common-obj-$(CONFIG_E1000E_PCI_EXPRESS) += net_tx_pkt.o net_rx_pkt.o
+common-obj-$(CONFIG_E1000E_PCI_EXPRESS) += e1000e.o e1000e_core.o e1000x_common.o
common-obj-$(CONFIG_RTL8139_PCI) += rtl8139.o
common-obj-$(CONFIG_VMXNET3_PCI) += net_tx_pkt.o net_rx_pkt.o
common-obj-$(CONFIG_VMXNET3_PCI) += vmxnet3.o
diff --git a/hw/pci-host/Makefile.objs b/hw/pci-host/Makefile.objs
index 6d6597c065..073d5124d1 100644
--- a/hw/pci-host/Makefile.objs
+++ b/hw/pci-host/Makefile.objs
@@ -14,8 +14,8 @@ common-obj-$(CONFIG_VERSATILE_PCI) += versatile.o
common-obj-$(CONFIG_PCI_SABRE) += sabre.o
common-obj-$(CONFIG_FULONG) += bonito.o
common-obj-$(CONFIG_PCI_PIIX) += piix.o
-common-obj-$(CONFIG_PCI_Q35) += q35.o
-common-obj-$(CONFIG_PCI_GENERIC) += gpex.o
-common-obj-$(CONFIG_PCI_XILINX) += xilinx-pcie.o
+common-obj-$(CONFIG_PCI_EXPRESS_Q35) += q35.o
+common-obj-$(CONFIG_PCI_EXPRESS_GENERIC_BRIDGE) += gpex.o
+common-obj-$(CONFIG_PCI_EXPRESS_XILINX) += xilinx-pcie.o
-common-obj-$(CONFIG_PCI_DESIGNWARE) += designware.o
+common-obj-$(CONFIG_PCI_EXPRESS_DESIGNWARE) += designware.o
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 05/27] build: actually use CONFIG_PAM
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (3 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 04/27] hw/pci-host/Makefile.objs: make CONFIGS clear for PCI EXPRESS Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 06/27] hw/i386/Makefile.objs: Build pc_piix* and pc_q35 boards Yang Zhong
` (23 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong
From: Paolo Bonzini <pbonzini@redhat.com>
Do not link it unconditionally into all binaries.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
default-configs/i386-softmmu.mak | 1 +
hw/pci-host/Makefile.objs | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
index 2f919df346..48da9968cc 100644
--- a/default-configs/i386-softmmu.mak
+++ b/default-configs/i386-softmmu.mak
@@ -67,3 +67,4 @@ CONFIG_I2C=y
CONFIG_SEV=$(CONFIG_KVM)
CONFIG_VTD=y
CONFIG_AMD_IOMMU=y
+CONFIG_PAM=y
diff --git a/hw/pci-host/Makefile.objs b/hw/pci-host/Makefile.objs
index 073d5124d1..a9cd3e022d 100644
--- a/hw/pci-host/Makefile.objs
+++ b/hw/pci-host/Makefile.objs
@@ -1,4 +1,4 @@
-common-obj-y += pam.o
+common-obj-$(CONFIG_PAM) += pam.o
# PPC devices
common-obj-$(CONFIG_PREP_PCI) += prep.o
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 06/27] hw/i386/Makefile.objs: Build pc_piix* and pc_q35 boards
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (4 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 05/27] build: actually use CONFIG_PAM Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 07/27] hw/arm/Makefile.objs: CONFIG_ARM_VIRT created for virt board Yang Zhong
` (22 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong, Ákos Kovács
From: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_PIIX and CONFIG_Q35 created for the pc board object files. These
are enabled automatically at default-configs/i386-softmmu.mak and
default-configs/x86_64-softmmu.mak
Signed-off-by: Ákos Kovács <akoskovacs@gmx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
default-configs/i386-softmmu.mak | 2 ++
hw/i386/Makefile.objs | 4 +++-
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
index 48da9968cc..71c9f6fbcb 100644
--- a/default-configs/i386-softmmu.mak
+++ b/default-configs/i386-softmmu.mak
@@ -68,3 +68,5 @@ CONFIG_SEV=$(CONFIG_KVM)
CONFIG_VTD=y
CONFIG_AMD_IOMMU=y
CONFIG_PAM=y
+CONFIG_I440FX=y
+CONFIG_Q35=y
diff --git a/hw/i386/Makefile.objs b/hw/i386/Makefile.objs
index fa87a14152..3de7ca2bb9 100644
--- a/hw/i386/Makefile.objs
+++ b/hw/i386/Makefile.objs
@@ -1,6 +1,8 @@
obj-$(CONFIG_KVM) += kvm/
obj-y += multiboot.o
-obj-y += pc.o pc_piix.o pc_q35.o
+obj-y += pc.o
+obj-$(CONFIG_I440FX) += pc_piix.o
+obj-$(CONFIG_Q35) += pc_q35.o
obj-y += pc_sysfw.o
obj-$(CONFIG_VTD) += x86-iommu.o intel_iommu.o
obj-$(CONFIG_AMD_IOMMU) += x86-iommu.o amd_iommu.o
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 07/27] hw/arm/Makefile.objs: CONFIG_ARM_VIRT created for virt board
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (5 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 06/27] hw/i386/Makefile.objs: Build pc_piix* and pc_q35 boards Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 08/27] hw/m68k/Makefile.objs: Conditionally build boards Yang Zhong
` (21 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong
Make ARM virt code configurable and the new CONFIG_ARM_VIRT
definitions added to the default-configs/arm-softmmu.mak.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
default-configs/arm-softmmu.mak | 1 +
hw/arm/Makefile.objs | 3 ++-
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 32f4a4ac27..1db36396b1 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -148,6 +148,7 @@ CONFIG_XIO3130=y
CONFIG_IOH3420=y
CONFIG_I82801B11=y
CONFIG_ACPI=y
+CONFIG_ARM_VIRT=y
CONFIG_SMBIOS=y
CONFIG_ASPEED_SOC=y
CONFIG_GPIO_KEY=y
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index 22b7f0ed0b..fa40e8d641 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -1,4 +1,5 @@
-obj-y += boot.o virt.o sysbus-fdt.o
+obj-y += boot.o sysbus-fdt.o
+obj-$(CONFIG_ARM_VIRT) += virt.o
obj-$(CONFIG_ACPI) += virt-acpi-build.o
obj-$(CONFIG_DIGIC) += digic_boards.o
obj-$(CONFIG_EXYNOS4) += exynos4_boards.o
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 08/27] hw/m68k/Makefile.objs: Conditionally build boards
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (6 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 07/27] hw/arm/Makefile.objs: CONFIG_ARM_VIRT created for virt board Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 09/27] hw/microblaze/Makefile.objs: Create configs for petalogix and xilinx boards Yang Zhong
` (20 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong, Ákos Kovács
From: Ákos Kovács <akoskovacs@gmx.com>
CONFIG_AN5206, CONFIG_MCF5206 and CONFIG_MCF5208 make
variables created for m68k boards, and added to
default-configs/m86k-softmmu.mak.
Signed-off-by: Ákos Kovács <akoskovacs@gmx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
default-configs/m68k-softmmu.mak | 2 ++
hw/m68k/Makefile.objs | 4 ++--
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/default-configs/m68k-softmmu.mak b/default-configs/m68k-softmmu.mak
index 60f7cdfbf2..27f5274244 100644
--- a/default-configs/m68k-softmmu.mak
+++ b/default-configs/m68k-softmmu.mak
@@ -2,3 +2,5 @@
CONFIG_COLDFIRE=y
CONFIG_PTIMER=y
+CONFIG_AN5206=y
+CONFIG_MCF5208=y
diff --git a/hw/m68k/Makefile.objs b/hw/m68k/Makefile.objs
index d1f089c08a..482f8477b4 100644
--- a/hw/m68k/Makefile.objs
+++ b/hw/m68k/Makefile.objs
@@ -1,2 +1,2 @@
-obj-y += an5206.o mcf5208.o
-obj-y += mcf5206.o mcf_intc.o
+obj-$(CONFIG_AN5206) += an5206.o mcf5206.o
+obj-$(CONFIG_MCF5208) += mcf5208.o mcf_intc.o
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 09/27] hw/microblaze/Makefile.objs: Create configs for petalogix and xilinx boards
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (7 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 08/27] hw/m68k/Makefile.objs: Conditionally build boards Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 10/27] hw/mips/Makefile.objs: Create CONFIG_* for r4k, malta, mipssim boards Yang Zhong
` (19 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong, Ákos Kovács
From: Ákos Kovács <akoskovacs@gmx.com>
CONFIG_PETALOGIX_* and CONFIG_XLNX_* configs added to
default-configs/microblaze-softmmu.mak and
default-configs/microblazeel-softmmu.mak.
Signed-off-by: Ákos Kovács <akoskovacs@gmx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
default-configs/microblaze-softmmu.mak | 3 +++
hw/microblaze/Makefile.objs | 6 +++---
2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/default-configs/microblaze-softmmu.mak b/default-configs/microblaze-softmmu.mak
index 7fca8e4c99..14837cf74a 100644
--- a/default-configs/microblaze-softmmu.mak
+++ b/default-configs/microblaze-softmmu.mak
@@ -10,3 +10,6 @@ CONFIG_XILINX_ETHLITE=y
CONFIG_SSI=y
CONFIG_SSI_M25P80=y
CONFIG_XLNX_ZYNQMP=y
+CONFIG_PETALOGIX_S3ADSP1800=y
+CONFIG_PETALOGIX_ML605=y
+CONFIG_XLNX_ZYNQMP_PMU=y
diff --git a/hw/microblaze/Makefile.objs b/hw/microblaze/Makefile.objs
index ae9fd40de7..8595a62f6c 100644
--- a/hw/microblaze/Makefile.objs
+++ b/hw/microblaze/Makefile.objs
@@ -1,4 +1,4 @@
-obj-y += petalogix_s3adsp1800_mmu.o
-obj-y += petalogix_ml605_mmu.o
-obj-y += xlnx-zynqmp-pmu.o
+obj-$(CONFIG_PETALOGIX_S3ADSP1800) += petalogix_s3adsp1800_mmu.o
+obj-$(CONFIG_PETALOGIX_ML605) += petalogix_ml605_mmu.o
+obj-$(CONFIG_XLNX_ZYNQMP_PMU) += xlnx-zynqmp-pmu.o
obj-y += boot.o
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 10/27] hw/mips/Makefile.objs: Create CONFIG_* for r4k, malta, mipssim boards
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (8 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 09/27] hw/microblaze/Makefile.objs: Create configs for petalogix and xilinx boards Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 11/27] hw/ppc/Makefile.objs: Build all boards conditinally with CONFIG_* Yang Zhong
` (18 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong, Ákos Kovács
From: Ákos Kovács <akoskovacs@gmx.com>
Add the new configs to default-configs/mips*-sofmmu.mak.
Signed-off-by: Ákos Kovács <akoskovacs@gmx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
default-configs/mips-softmmu-common.mak | 3 +++
hw/mips/Makefile.objs | 5 +++--
2 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/default-configs/mips-softmmu-common.mak b/default-configs/mips-softmmu-common.mak
index fae2347ee7..479fb4d900 100644
--- a/default-configs/mips-softmmu-common.mak
+++ b/default-configs/mips-softmmu-common.mak
@@ -36,3 +36,6 @@ CONFIG_EMPTY_SLOT=y
CONFIG_MIPS_CPS=y
CONFIG_MIPS_ITU=y
CONFIG_I2C=y
+CONFIG_R4K=y
+CONFIG_MALTA=y
+CONFIG_MIPSSIM=y
diff --git a/hw/mips/Makefile.objs b/hw/mips/Makefile.objs
index 17a311aaba..525809af07 100644
--- a/hw/mips/Makefile.objs
+++ b/hw/mips/Makefile.objs
@@ -1,7 +1,8 @@
-obj-y += mips_r4k.o mips_malta.o mips_mipssim.o
obj-y += addr.o mips_int.o
+obj-$(CONFIG_R4K) += mips_r4k.o
+obj-$(CONFIG_MALTA) += gt64xxx_pci.o mips_malta.o
+obj-$(CONFIG_MIPSSIM) += mips_mipssim.o
obj-$(CONFIG_JAZZ) += mips_jazz.o
obj-$(CONFIG_FULONG) += mips_fulong2e.o
-obj-y += gt64xxx_pci.o
obj-$(CONFIG_MIPS_CPS) += cps.o
obj-$(CONFIG_MIPS_BOSTON) += boston.o
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 11/27] hw/ppc/Makefile.objs: Build all boards conditinally with CONFIG_*
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (9 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 10/27] hw/mips/Makefile.objs: Create CONFIG_* for r4k, malta, mipssim boards Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 12/27] hw/sh4/Makefile.objs: New CONFIG_* varibales created for sh4 boards and device Yang Zhong
` (17 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong, Ákos Kovács
From: Ákos Kovács <akoskovacs@gmx.com>
CONFIG_PPC405, CONFIG_PPC440, CONFIG_MAC_OLDWORLD, CONFIG_MAX_NEWWORLD
and CONFIG_VIRTEX configuration options created for
default-configs/ppc*-softmmu.mak.
Signed-off-by: Ákos Kovács <akoskovacs@gmx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
default-configs/ppc-softmmu.mak | 7 ++++++-
hw/ppc/Makefile.objs | 11 ++++++-----
2 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/default-configs/ppc-softmmu.mak b/default-configs/ppc-softmmu.mak
index 23d871fb3e..7f80f0ccba 100644
--- a/default-configs/ppc-softmmu.mak
+++ b/default-configs/ppc-softmmu.mak
@@ -21,6 +21,10 @@ CONFIG_E500=y
CONFIG_OPENPIC_KVM=$(call land,$(CONFIG_E500),$(CONFIG_KVM))
CONFIG_PLATFORM_BUS=y
CONFIG_ETSEC=y
+CONFIG_PPC405=y
+CONFIG_PPC440=y
+CONFIG_VIRTEX=y
+
# For Sam460ex
CONFIG_SAM460EX=y
CONFIG_USB_EHCI_SYSBUS=y
@@ -34,7 +38,6 @@ CONFIG_M41T80=y
CONFIG_VGA_CIRRUS=y
# For Macs
-CONFIG_MAC=y
CONFIG_ESCC=y
CONFIG_MACIO=y
CONFIG_MACIO_GPIO=y
@@ -50,6 +53,8 @@ CONFIG_GRACKLE_PCI=y
CONFIG_UNIN_PCI=y
CONFIG_DEC_PCI=y
CONFIG_IDE_MACIO=y
+CONFIG_MAC_OLDWORLD=y
+CONFIG_MAC_NEWWORLD=y
# For PReP
CONFIG_PREP=y
diff --git a/hw/ppc/Makefile.objs b/hw/ppc/Makefile.objs
index 4e0c1c0941..7d815b7d57 100644
--- a/hw/ppc/Makefile.objs
+++ b/hw/ppc/Makefile.objs
@@ -14,19 +14,20 @@ endif
obj-$(CONFIG_PSERIES) += spapr_rtas_ddw.o
# PowerPC 4xx boards
obj-y += ppc4xx_devs.o ppc405_uc.o
-obj-$(CONFIG_PPC4XX) += ppc4xx_pci.o ppc405_boards.o
-obj-$(CONFIG_PPC4XX) += ppc440_bamboo.o ppc440_pcix.o ppc440_uc.o
+obj-$(CONFIG_PPC405) += ppc405_boards.o
+obj-$(CONFIG_PPC440) += ppc440_bamboo.o ppc440_pcix.o ppc440_uc.o
+obj-$(CONFIG_PPC4XX) += ppc4xx_pci.o
obj-$(CONFIG_SAM460EX) += sam460ex.o
# PReP
obj-$(CONFIG_PREP) += prep.o
obj-$(CONFIG_PREP) += prep_systemio.o
obj-${CONFIG_RS6000_MC} += rs6000_mc.o
# OldWorld PowerMac
-obj-$(CONFIG_MAC) += mac_oldworld.o
+obj-$(CONFIG_MAC_OLDWORLD) += mac_oldworld.o
# NewWorld PowerMac
-obj-$(CONFIG_MAC) += mac_newworld.o
+obj-$(CONFIG_MAC_NEWWORLD) += mac_newworld.o
# e500
obj-$(CONFIG_E500) += e500.o mpc8544ds.o e500plat.o
obj-$(CONFIG_E500) += mpc8544_guts.o ppce500_spin.o
# PowerPC 440 Xilinx ML507 reference board.
-obj-$(CONFIG_XILINX) += virtex_ml507.o
+obj-$(CONFIG_VIRTEX) += virtex_ml507.o
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 12/27] hw/sh4/Makefile.objs: New CONFIG_* varibales created for sh4 boards and device
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (10 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 11/27] hw/ppc/Makefile.objs: Build all boards conditinally with CONFIG_* Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 13/27] hw/s390/Makefile.objs: Create new CONFIG_* variables for s390x boards and devices Yang Zhong
` (16 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong, Ákos Kovács
From: Ákos Kovács <akoskovacs@gmx.com>
Make hw/sh4 configurable and add new CONFIG_* to the
default-configs/sh4*-softmmu.mak.
Signed-off-by: Ákos Kovács <akoskovacs@gmx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
default-configs/sh4-softmmu.mak | 2 ++
default-configs/sh4eb-softmmu.mak | 2 ++
hw/sh4/Makefile.objs | 4 ++--
3 files changed, 6 insertions(+), 2 deletions(-)
diff --git a/default-configs/sh4-softmmu.mak b/default-configs/sh4-softmmu.mak
index caeccd55be..1fdb009151 100644
--- a/default-configs/sh4-softmmu.mak
+++ b/default-configs/sh4-softmmu.mak
@@ -19,3 +19,5 @@ CONFIG_PCSPK=y
CONFIG_I82374=y
CONFIG_I8257=y
CONFIG_MC146818RTC=y
+CONFIG_R2D=y
+CONFIG_SHIX=y
diff --git a/default-configs/sh4eb-softmmu.mak b/default-configs/sh4eb-softmmu.mak
index 53b9cd7b5a..3b550a5fe8 100644
--- a/default-configs/sh4eb-softmmu.mak
+++ b/default-configs/sh4eb-softmmu.mak
@@ -19,3 +19,5 @@ CONFIG_PCSPK=y
CONFIG_I82374=y
CONFIG_I8257=y
CONFIG_MC146818RTC=y
+CONFIG_R2D=y
+CONFIG_SHIX=y
diff --git a/hw/sh4/Makefile.objs b/hw/sh4/Makefile.objs
index 2393702c57..2a707f9473 100644
--- a/hw/sh4/Makefile.objs
+++ b/hw/sh4/Makefile.objs
@@ -1,4 +1,4 @@
-obj-y += shix.o r2d.o
-
obj-y += sh7750.o sh7750_regnames.o
obj-y += sh_pci.o
+obj-$(CONFIG_R2D) += r2d.o
+obj-$(CONFIG_SHIX) += shix.o
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 13/27] hw/s390/Makefile.objs: Create new CONFIG_* variables for s390x boards and devices
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (11 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 12/27] hw/sh4/Makefile.objs: New CONFIG_* varibales created for sh4 boards and device Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 14/27] hw/sparc/Makefile.objs: CONFIG_* for sun4m and leon3 created Yang Zhong
` (15 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong
From: Paolo Bonzini <pbonzini@redhat.com>
Make hw/s390x configurable and add new CONFIG_* to the
default-configs/s390x*-softmmu.mak. This will be used to
enable/disable vfio-ccw.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
default-configs/s390x-softmmu.mak | 1 +
hw/s390x/Makefile.objs | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/default-configs/s390x-softmmu.mak b/default-configs/s390x-softmmu.mak
index 5eef375924..8bb7e438c8 100644
--- a/default-configs/s390x-softmmu.mak
+++ b/default-configs/s390x-softmmu.mak
@@ -8,3 +8,4 @@ CONFIG_S390_FLIC_KVM=$(CONFIG_KVM)
CONFIG_VFIO_CCW=$(CONFIG_LINUX)
CONFIG_WDT_DIAG288=y
CONFIG_VFIO_AP=$(CONFIG_LINUX)
+CONFIG_S390_CCW_VIRTIO=y
diff --git a/hw/s390x/Makefile.objs b/hw/s390x/Makefile.objs
index ca68806e44..a18c471913 100644
--- a/hw/s390x/Makefile.objs
+++ b/hw/s390x/Makefile.objs
@@ -5,7 +5,7 @@ obj-y += sclpquiesce.o
obj-y += sclpcpu.o
obj-y += ipl.o
obj-y += css.o
-obj-y += s390-virtio-ccw.o
+obj-$(CONFIG_S390_CCW_VIRTIO) += s390-virtio-ccw.o
obj-y += 3270-ccw.o
obj-y += virtio-ccw.o
obj-$(CONFIG_VIRTIO_SERIAL) += virtio-ccw-serial.o
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 14/27] hw/sparc/Makefile.objs: CONFIG_* for sun4m and leon3 created
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (12 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 13/27] hw/s390/Makefile.objs: Create new CONFIG_* variables for s390x boards and devices Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 15/27] hw/lm32/Makefile.objs: Conditionally build lm32 and milkmyst Yang Zhong
` (14 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong, Ákos Kovács
From: Ákos Kovács <akoskovacs@gmx.com>
CONFIG_LEON3 added to default-configs/sparc-softmmu.mak.
Signed-off-by: Ákos Kovács <akoskovacs@gmx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
default-configs/sparc-softmmu.mak | 2 ++
hw/sparc/Makefile.objs | 4 +++-
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/default-configs/sparc-softmmu.mak b/default-configs/sparc-softmmu.mak
index 12f97eeb20..59a4a3d693 100644
--- a/default-configs/sparc-softmmu.mak
+++ b/default-configs/sparc-softmmu.mak
@@ -18,4 +18,6 @@ CONFIG_CS4231=y
CONFIG_GRLIB=y
CONFIG_STP2000=y
CONFIG_ECCMEMCTL=y
+
CONFIG_SUN4M=y
+CONFIG_LEON3=y
diff --git a/hw/sparc/Makefile.objs b/hw/sparc/Makefile.objs
index e2d0828c39..d57e33f83e 100644
--- a/hw/sparc/Makefile.objs
+++ b/hw/sparc/Makefile.objs
@@ -1 +1,3 @@
-obj-y += sun4m_iommu.o sun4m.o leon3.o
+obj-$(CONFIG_SUN4M) += sun4m_iommu.o
+obj-$(CONFIG_SUN4M) += sun4m.o
+obj-$(CONFIG_LEON3) += leon3.o
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 15/27] hw/lm32/Makefile.objs: Conditionally build lm32 and milkmyst
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (13 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 14/27] hw/sparc/Makefile.objs: CONFIG_* for sun4m and leon3 created Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 16/27] hw/xtensa/Makefile.objs: Build xtensa_sim and xtensa_fpga conditionally Yang Zhong
` (13 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong, Ákos Kovács
From: Ákos Kovács <akoskovacs@gmx.com>
CONFIG_LM32 and CONFIG_MILKYMIST added for lm32 and milkmyst build.
Signed-off-by: Ákos Kovács <akoskovacs@gmx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
hw/lm32/Makefile.objs | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/hw/lm32/Makefile.objs b/hw/lm32/Makefile.objs
index ea6418ae59..c3941866c7 100644
--- a/hw/lm32/Makefile.objs
+++ b/hw/lm32/Makefile.objs
@@ -1,3 +1,3 @@
# LM32 boards
-obj-y += lm32_boards.o
-obj-y += milkymist.o
+obj-$(CONFIG_LM32) += lm32_boards.o
+obj-$(CONFIG_MILKYMIST) += milkymist.o
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 16/27] hw/xtensa/Makefile.objs: Build xtensa_sim and xtensa_fpga conditionally
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (14 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 15/27] hw/lm32/Makefile.objs: Conditionally build lm32 and milkmyst Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 17/27] hw/nios2/Makefile.objs: Conditionally build nios2 Yang Zhong
` (12 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong, Ákos Kovács
From: Ákos Kovács <akoskovacs@gmx.com>
Add the new CONFIG_* values to default-config/xtensa*-softmmu.mak.
Signed-off-by: Ákos Kovács <akoskovacs@gmx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
---
default-configs/xtensa-softmmu.mak | 3 +++
default-configs/xtensaeb-softmmu.mak | 3 +++
hw/xtensa/Makefile.objs | 4 ++--
3 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/default-configs/xtensa-softmmu.mak b/default-configs/xtensa-softmmu.mak
index 9d8899cde7..baf90ca162 100644
--- a/default-configs/xtensa-softmmu.mak
+++ b/default-configs/xtensa-softmmu.mak
@@ -3,3 +3,6 @@
CONFIG_SERIAL=y
CONFIG_OPENCORES_ETH=y
CONFIG_PFLASH_CFI01=y
+
+CONFIG_XTENSA_SIM=y
+CONFIG_XTENSA_FPGA=y
diff --git a/default-configs/xtensaeb-softmmu.mak b/default-configs/xtensaeb-softmmu.mak
index 9d8899cde7..baf90ca162 100644
--- a/default-configs/xtensaeb-softmmu.mak
+++ b/default-configs/xtensaeb-softmmu.mak
@@ -3,3 +3,6 @@
CONFIG_SERIAL=y
CONFIG_OPENCORES_ETH=y
CONFIG_PFLASH_CFI01=y
+
+CONFIG_XTENSA_SIM=y
+CONFIG_XTENSA_FPGA=y
diff --git a/hw/xtensa/Makefile.objs b/hw/xtensa/Makefile.objs
index cb4998d2bf..62e244fa53 100644
--- a/hw/xtensa/Makefile.objs
+++ b/hw/xtensa/Makefile.objs
@@ -1,4 +1,4 @@
obj-y += pic_cpu.o
-obj-y += sim.o
obj-y += xtensa_memory.o
-obj-y += xtfpga.o
+obj-$(CONFIG_XTENSA_SIM) += sim.o
+obj-$(CONFIG_XTENSA_FPGA) += xtfpga.o
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 17/27] hw/nios2/Makefile.objs: Conditionally build nios2
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (15 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 16/27] hw/xtensa/Makefile.objs: Build xtensa_sim and xtensa_fpga conditionally Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 18/27] hw/riscv/Makefile.objs: Create CONFIG_* for riscv boards Yang Zhong
` (11 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong
CONFIG_NIOS2_10M50 added for 10m50 dev board.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
default-configs/nios2-softmmu.mak | 1 +
hw/nios2/Makefile.objs | 3 ++-
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/default-configs/nios2-softmmu.mak b/default-configs/nios2-softmmu.mak
index 74dc70caae..ab42d0fc28 100644
--- a/default-configs/nios2-softmmu.mak
+++ b/default-configs/nios2-softmmu.mak
@@ -4,3 +4,4 @@ CONFIG_NIOS2=y
CONFIG_SERIAL=y
CONFIG_PTIMER=y
CONFIG_ALTERA_TIMER=y
+CONFIG_NIOS2_10M50=y
diff --git a/hw/nios2/Makefile.objs b/hw/nios2/Makefile.objs
index 6b5c421760..89a419a9f5 100644
--- a/hw/nios2/Makefile.objs
+++ b/hw/nios2/Makefile.objs
@@ -1 +1,2 @@
-obj-y = boot.o cpu_pic.o 10m50_devboard.o
+obj-y = boot.o cpu_pic.o
+obj-$(CONFIG_NIOS2_10M50) += 10m50_devboard.o
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 18/27] hw/riscv/Makefile.objs: Create CONFIG_* for riscv boards
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (16 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 17/27] hw/nios2/Makefile.objs: Conditionally build nios2 Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 19/27] hw/sparc64/Makefile.objs: Create CONFIG_* for sparc64 Yang Zhong
` (10 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong
Add the new configs to default-configs/riscv*-sofmmu.mak.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
default-configs/riscv32-softmmu.mak | 7 +++++++
default-configs/riscv64-softmmu.mak | 7 +++++++
hw/riscv/Makefile.objs | 22 +++++++++++-----------
3 files changed, 25 insertions(+), 11 deletions(-)
diff --git a/default-configs/riscv32-softmmu.mak b/default-configs/riscv32-softmmu.mak
index fbfd1d4e4b..65337166e1 100644
--- a/default-configs/riscv32-softmmu.mak
+++ b/default-configs/riscv32-softmmu.mak
@@ -12,3 +12,10 @@ CONFIG_PCI_EXPRESS_GENERIC_BRIDGE=y
CONFIG_VGA=y
CONFIG_VGA_PCI=y
+
+CONFIG_SPIKE=y
+CONFIG_HART=y
+CONFIG_SIFIVE_E=y
+CONFIG_SIFIVE=y
+CONFIG_SIFIVE_U=y
+CONFIG_RISCV_VIRT=y
diff --git a/default-configs/riscv64-softmmu.mak b/default-configs/riscv64-softmmu.mak
index fbfd1d4e4b..65337166e1 100644
--- a/default-configs/riscv64-softmmu.mak
+++ b/default-configs/riscv64-softmmu.mak
@@ -12,3 +12,10 @@ CONFIG_PCI_EXPRESS_GENERIC_BRIDGE=y
CONFIG_VGA=y
CONFIG_VGA_PCI=y
+
+CONFIG_SPIKE=y
+CONFIG_HART=y
+CONFIG_SIFIVE_E=y
+CONFIG_SIFIVE=y
+CONFIG_SIFIVE_U=y
+CONFIG_RISCV_VIRT=y
diff --git a/hw/riscv/Makefile.objs b/hw/riscv/Makefile.objs
index 1dde01d39d..79bfb3abf9 100644
--- a/hw/riscv/Makefile.objs
+++ b/hw/riscv/Makefile.objs
@@ -1,11 +1,11 @@
-obj-y += riscv_htif.o
-obj-y += riscv_hart.o
-obj-y += sifive_e.o
-obj-y += sifive_clint.o
-obj-y += sifive_prci.o
-obj-y += sifive_plic.o
-obj-y += sifive_test.o
-obj-y += sifive_u.o
-obj-y += sifive_uart.o
-obj-y += spike.o
-obj-y += virt.o
+obj-$(CONFIG_SPIKE) += riscv_htif.o
+obj-$(CONFIG_HART) += riscv_hart.o
+obj-$(CONFIG_SIFIVE_E) += sifive_e.o
+obj-$(CONFIG_SIFIVE) += sifive_clint.o
+obj-$(CONFIG_SIFIVE) += sifive_prci.o
+obj-$(CONFIG_SIFIVE) += sifive_plic.o
+obj-$(CONFIG_SIFIVE) += sifive_test.o
+obj-$(CONFIG_SIFIVE_U) += sifive_u.o
+obj-$(CONFIG_SIFIVE) += sifive_uart.o
+obj-$(CONFIG_SPIKE) += spike.o
+obj-$(CONFIG_RISCV_VIRT) += virt.o
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 19/27] hw/sparc64/Makefile.objs: Create CONFIG_* for sparc64
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (17 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 18/27] hw/riscv/Makefile.objs: Create CONFIG_* for riscv boards Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 20/27] hw/alpha/Makefile.objs: Create CONFIG_* for alpha Yang Zhong
` (9 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong
Add the new configs to default-configs/sparc64-sofmmu.mak.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
default-configs/sparc64-softmmu.mak | 2 ++
hw/sparc64/Makefile.objs | 6 +++---
2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/default-configs/sparc64-softmmu.mak b/default-configs/sparc64-softmmu.mak
index ce63d47046..1fae4888db 100644
--- a/default-configs/sparc64-softmmu.mak
+++ b/default-configs/sparc64-softmmu.mak
@@ -17,3 +17,5 @@ CONFIG_SUNHME=y
CONFIG_MC146818RTC=y
CONFIG_ISA_TESTDEV=y
CONFIG_SUN4V_RTC=y
+CONFIG_SUN4U=y
+CONFIG_NIAGARA=y
diff --git a/hw/sparc64/Makefile.objs b/hw/sparc64/Makefile.objs
index 117e0ff27d..af0525c1a2 100644
--- a/hw/sparc64/Makefile.objs
+++ b/hw/sparc64/Makefile.objs
@@ -1,4 +1,4 @@
obj-y += sparc64.o
-obj-y += sun4u_iommu.o
-obj-y += sun4u.o
-obj-y += niagara.o
\ No newline at end of file
+obj-$(CONFIG_SUN4U) += sun4u_iommu.o
+obj-$(CONFIG_SUN4U) += sun4u.o
+obj-$(CONFIG_NIAGARA) += niagara.o
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 20/27] hw/alpha/Makefile.objs: Create CONFIG_* for alpha
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (18 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 19/27] hw/sparc64/Makefile.objs: Create CONFIG_* for sparc64 Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 21/27] hw/cris/Makefile.objs: Create CONFIG_* for cris Yang Zhong
` (8 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong
Add the new configs to default-configs/alpha-sofmmu.mak.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
default-configs/alpha-softmmu.mak | 1 +
hw/alpha/Makefile.objs | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/default-configs/alpha-softmmu.mak b/default-configs/alpha-softmmu.mak
index 4d654eaa0b..49cb7ce351 100644
--- a/default-configs/alpha-softmmu.mak
+++ b/default-configs/alpha-softmmu.mak
@@ -19,3 +19,4 @@ CONFIG_I8259=y
CONFIG_MC146818RTC=y
CONFIG_ISA_TESTDEV=y
CONFIG_SMC37C669=y
+CONFIG_DP264=y
diff --git a/hw/alpha/Makefile.objs b/hw/alpha/Makefile.objs
index 5c742756f0..62fdf3edec 100644
--- a/hw/alpha/Makefile.objs
+++ b/hw/alpha/Makefile.objs
@@ -1 +1 @@
-obj-y += dp264.o pci.o typhoon.o
+obj-$(CONFIG_DP264) += dp264.o pci.o typhoon.o
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 21/27] hw/cris/Makefile.objs: Create CONFIG_* for cris
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (19 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 20/27] hw/alpha/Makefile.objs: Create CONFIG_* for alpha Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 22/27] hw/hppa/Makefile.objs: Create CONFIG_* for hppa Yang Zhong
` (7 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong
Add the new configs to default-configs/cris-sofmmu.mak.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
default-configs/cris-softmmu.mak | 1 +
hw/cris/Makefile.objs | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/default-configs/cris-softmmu.mak b/default-configs/cris-softmmu.mak
index d970d50158..a637c4b4bf 100644
--- a/default-configs/cris-softmmu.mak
+++ b/default-configs/cris-softmmu.mak
@@ -4,3 +4,4 @@ CONFIG_ETRAXFS=y
CONFIG_NAND=y
CONFIG_PTIMER=y
CONFIG_PFLASH_CFI02=y
+CONFIG_AXIS=y
diff --git a/hw/cris/Makefile.objs b/hw/cris/Makefile.objs
index 7624173f77..a4a27b3a13 100644
--- a/hw/cris/Makefile.objs
+++ b/hw/cris/Makefile.objs
@@ -1,2 +1,2 @@
obj-y += boot.o
-obj-y += axis_dev88.o
+obj-$(CONFIG_AXIS) += axis_dev88.o
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 22/27] hw/hppa/Makefile.objs: Create CONFIG_* for hppa
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (20 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 21/27] hw/cris/Makefile.objs: Create CONFIG_* for cris Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 23/27] hw/moxie/Makefile.objs: Conditionally build moxie Yang Zhong
` (6 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong
Add the new configs to default-configs/hppa-sofmmu.mak.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
---
default-configs/hppa-softmmu.mak | 1 +
hw/hppa/Makefile.objs | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/default-configs/hppa-softmmu.mak b/default-configs/hppa-softmmu.mak
index 4badc0521e..b594a6ddd9 100644
--- a/default-configs/hppa-softmmu.mak
+++ b/default-configs/hppa-softmmu.mak
@@ -10,3 +10,4 @@ CONFIG_IDE_CMD646=y
# CONFIG_IDE_MMIO=y
CONFIG_VIRTIO_VGA=y
CONFIG_MC146818RTC=y
+CONFIG_DINO=y
diff --git a/hw/hppa/Makefile.objs b/hw/hppa/Makefile.objs
index bef241ed25..67838f50a3 100644
--- a/hw/hppa/Makefile.objs
+++ b/hw/hppa/Makefile.objs
@@ -1 +1 @@
-obj-y += machine.o pci.o dino.o
+obj-$(CONFIG_DINO) += pci.o machine.o dino.o
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 23/27] hw/moxie/Makefile.objs: Conditionally build moxie
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (21 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 22/27] hw/hppa/Makefile.objs: Create CONFIG_* for hppa Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 24/27] hw/openrisc/Makefile.objs: Create CONFIG_* for openrisc Yang Zhong
` (5 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong
CONFIG_MOXIE added for moxiesim board.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
default-configs/moxie-softmmu.mak | 1 +
hw/moxie/Makefile.objs | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/default-configs/moxie-softmmu.mak b/default-configs/moxie-softmmu.mak
index e00d099994..17ba906dc2 100644
--- a/default-configs/moxie-softmmu.mak
+++ b/default-configs/moxie-softmmu.mak
@@ -5,3 +5,4 @@ CONFIG_MC146818RTC=y
CONFIG_SERIAL=y
CONFIG_SERIAL_ISA=y
CONFIG_VGA=y
+CONFIG_MOXIESIM=y
diff --git a/hw/moxie/Makefile.objs b/hw/moxie/Makefile.objs
index bfc90012fd..ddbf300f54 100644
--- a/hw/moxie/Makefile.objs
+++ b/hw/moxie/Makefile.objs
@@ -1,2 +1,2 @@
# moxie boards
-obj-y += moxiesim.o
+obj-$(CONFIG_MOXIESIM) += moxiesim.o
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 24/27] hw/openrisc/Makefile.objs: Create CONFIG_* for openrisc
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (22 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 23/27] hw/moxie/Makefile.objs: Conditionally build moxie Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 25/27] hw/tricore/Makefile.objs: Create CONFIG_* for tricore Yang Zhong
` (4 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong
Add the new configs to default-configs/or1k-sofmmu.mak.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
default-configs/or1k-softmmu.mak | 1 +
hw/openrisc/Makefile.objs | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/default-configs/or1k-softmmu.mak b/default-configs/or1k-softmmu.mak
index 6f5824fd48..6a0f2ef6cf 100644
--- a/default-configs/or1k-softmmu.mak
+++ b/default-configs/or1k-softmmu.mak
@@ -3,3 +3,4 @@
CONFIG_SERIAL=y
CONFIG_OPENCORES_ETH=y
CONFIG_OMPIC=y
+CONFIG_OR1K_SIM=y
diff --git a/hw/openrisc/Makefile.objs b/hw/openrisc/Makefile.objs
index 61246b149b..aa04de7f5a 100644
--- a/hw/openrisc/Makefile.objs
+++ b/hw/openrisc/Makefile.objs
@@ -1,2 +1,2 @@
obj-y = pic_cpu.o cputimer.o
-obj-y += openrisc_sim.o
+obj-$(CONFIG_OR1K_SIM) += openrisc_sim.o
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 25/27] hw/tricore/Makefile.objs: Create CONFIG_* for tricore
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (23 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 24/27] hw/openrisc/Makefile.objs: Create CONFIG_* for openrisc Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 26/27] hw/i2c/Makefile.objs: Create new CONFIG_* variables for EEPROM and ACPI controller Yang Zhong
` (3 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong
Add the new configs to default-configs/tricore-sofmmu.mak.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
default-configs/tricore-softmmu.mak | 1 +
hw/tricore/Makefile.objs | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/default-configs/tricore-softmmu.mak b/default-configs/tricore-softmmu.mak
index e69de29bb2..c397cff38a 100644
--- a/default-configs/tricore-softmmu.mak
+++ b/default-configs/tricore-softmmu.mak
@@ -0,0 +1 @@
+CONFIG_TRICORE=y
diff --git a/hw/tricore/Makefile.objs b/hw/tricore/Makefile.objs
index 435e095cff..5501f6c1a8 100644
--- a/hw/tricore/Makefile.objs
+++ b/hw/tricore/Makefile.objs
@@ -1 +1 @@
-obj-y += tricore_testboard.o
+obj-$(CONFIG_TRICORE) += tricore_testboard.o
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 26/27] hw/i2c/Makefile.objs: Create new CONFIG_* variables for EEPROM and ACPI controller
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (24 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 25/27] hw/tricore/Makefile.objs: Create CONFIG_* for tricore Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 27/27] hw/vfio/Makefile.objs: Create new CONFIG_* variables for VFIO core and PCI Yang Zhong
` (2 subsequent siblings)
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong
From: Paolo Bonzini <pbonzini@redhat.com>
Create separate variables for these components, they are
used in many boards but not all. This allows finer-grain
selection of the included code with default-configs/*.mak.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
default-configs/arm-softmmu.mak | 1 +
default-configs/i386-softmmu.mak | 2 ++
default-configs/mips-softmmu-common.mak | 2 ++
default-configs/ppc-softmmu.mak | 1 +
hw/i2c/Makefile.objs | 5 +++--
5 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index 1db36396b1..d700d093f3 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -151,6 +151,7 @@ CONFIG_ACPI=y
CONFIG_ARM_VIRT=y
CONFIG_SMBIOS=y
CONFIG_ASPEED_SOC=y
+CONFIG_SMBUS_EEPROM=y
CONFIG_GPIO_KEY=y
CONFIG_MSF2=y
CONFIG_FW_CFG_DMA=y
diff --git a/default-configs/i386-softmmu.mak b/default-configs/i386-softmmu.mak
index 71c9f6fbcb..15b628757b 100644
--- a/default-configs/i386-softmmu.mak
+++ b/default-configs/i386-softmmu.mak
@@ -62,6 +62,8 @@ CONFIG_I82801B11=y
CONFIG_SMBIOS=y
CONFIG_PXB=y
CONFIG_ACPI_VMGENID=y
+CONFIG_ACPI_SMBUS=y
+CONFIG_SMBUS_EEPROM=y
CONFIG_FW_CFG_DMA=y
CONFIG_I2C=y
CONFIG_SEV=$(CONFIG_KVM)
diff --git a/default-configs/mips-softmmu-common.mak b/default-configs/mips-softmmu-common.mak
index 479fb4d900..ded74980e1 100644
--- a/default-configs/mips-softmmu-common.mak
+++ b/default-configs/mips-softmmu-common.mak
@@ -39,3 +39,5 @@ CONFIG_I2C=y
CONFIG_R4K=y
CONFIG_MALTA=y
CONFIG_MIPSSIM=y
+CONFIG_ACPI_SMBUS=y
+CONFIG_SMBUS_EEPROM=y
diff --git a/default-configs/ppc-softmmu.mak b/default-configs/ppc-softmmu.mak
index 7f80f0ccba..52acb7cf39 100644
--- a/default-configs/ppc-softmmu.mak
+++ b/default-configs/ppc-softmmu.mak
@@ -36,6 +36,7 @@ CONFIG_AT24C=y
CONFIG_BITBANG_I2C=y
CONFIG_M41T80=y
CONFIG_VGA_CIRRUS=y
+CONFIG_SMBUS_EEPROM=y
# For Macs
CONFIG_ESCC=y
diff --git a/hw/i2c/Makefile.objs b/hw/i2c/Makefile.objs
index 82e747e1cd..cecee486f7 100644
--- a/hw/i2c/Makefile.objs
+++ b/hw/i2c/Makefile.objs
@@ -1,8 +1,9 @@
-common-obj-$(CONFIG_I2C) += core.o smbus.o smbus_eeprom.o
+common-obj-$(CONFIG_I2C) += core.o smbus.o
+common-obj-$(CONFIG_SMBUS_EEPROM) += smbus_eeprom.o
common-obj-$(CONFIG_DDC) += i2c-ddc.o
common-obj-$(CONFIG_VERSATILE_I2C) += versatile_i2c.o
common-obj-$(CONFIG_ACPI_X86) += smbus_ich9.o
-common-obj-$(CONFIG_APM) += pm_smbus.o
+common-obj-$(CONFIG_ACPI_SMBUS) += pm_smbus.o
common-obj-$(CONFIG_BITBANG_I2C) += bitbang_i2c.o
common-obj-$(CONFIG_EXYNOS4) += exynos4210_i2c.o
common-obj-$(CONFIG_IMX_I2C) += imx_i2c.o
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* [Qemu-devel] [PATCH v2 27/27] hw/vfio/Makefile.objs: Create new CONFIG_* variables for VFIO core and PCI
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (25 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 26/27] hw/i2c/Makefile.objs: Create new CONFIG_* variables for EEPROM and ACPI controller Yang Zhong
@ 2019-02-02 7:24 ` Yang Zhong
2019-02-03 17:25 ` [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig no-reply
2019-02-03 17:52 ` no-reply
28 siblings, 0 replies; 30+ messages in thread
From: Yang Zhong @ 2019-02-02 7:24 UTC (permalink / raw)
To: qemu-devel; +Cc: pbonzini, thuth, yang.zhong
From: Paolo Bonzini <pbonzini@redhat.com>
Make hw/vfio configurable and add new CONFIG_VFIO_* to the
default-configs/s390x*-softmmu.mak. This allow a finer-grain
selection of the various VFIO backends.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
---
default-configs/arm-softmmu.mak | 2 ++
default-configs/pci.mak | 2 ++
default-configs/ppc64-softmmu.mak | 1 +
default-configs/s390x-softmmu.mak | 5 +++--
hw/Makefile.objs | 2 +-
hw/vfio/Makefile.objs | 7 +++----
6 files changed, 12 insertions(+), 7 deletions(-)
diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
index d700d093f3..734ca721e9 100644
--- a/default-configs/arm-softmmu.mak
+++ b/default-configs/arm-softmmu.mak
@@ -124,6 +124,8 @@ CONFIG_VERSATILE_PCI=y
CONFIG_VERSATILE_I2C=y
CONFIG_PCI_EXPRESS_GENERIC_BRIDGE=y
+CONFIG_VFIO=$(CONFIG_LINUX)
+CONFIG_VFIO_PLATFORM=y
CONFIG_VFIO_XGMAC=y
CONFIG_VFIO_AMD_XGBE=y
diff --git a/default-configs/pci.mak b/default-configs/pci.mak
index 83738cbb65..037636fa33 100644
--- a/default-configs/pci.mak
+++ b/default-configs/pci.mak
@@ -47,3 +47,5 @@ CONFIG_VGA_PCI=y
CONFIG_BOCHS_DISPLAY=y
CONFIG_IVSHMEM_DEVICE=$(CONFIG_IVSHMEM)
CONFIG_ROCKER=y
+CONFIG_VFIO=$(CONFIG_LINUX)
+CONFIG_VFIO_PCI=y
diff --git a/default-configs/ppc64-softmmu.mak b/default-configs/ppc64-softmmu.mak
index 7f34ad0528..ccd7b179df 100644
--- a/default-configs/ppc64-softmmu.mak
+++ b/default-configs/ppc64-softmmu.mak
@@ -18,6 +18,7 @@ CONFIG_XICS_SPAPR=$(CONFIG_PSERIES)
CONFIG_XICS_KVM=$(call land,$(CONFIG_PSERIES),$(CONFIG_KVM))
CONFIG_XIVE=$(CONFIG_PSERIES)
CONFIG_XIVE_SPAPR=$(CONFIG_PSERIES)
+CONFIG_VFIO_SPAPR=$(CONFIG_PSERIES)
CONFIG_MEM_DEVICE=y
CONFIG_DIMM=y
CONFIG_SPAPR_RNG=y
diff --git a/default-configs/s390x-softmmu.mak b/default-configs/s390x-softmmu.mak
index 8bb7e438c8..6f2c6cec18 100644
--- a/default-configs/s390x-softmmu.mak
+++ b/default-configs/s390x-softmmu.mak
@@ -5,7 +5,8 @@ CONFIG_SCLPCONSOLE=y
CONFIG_TERMINAL3270=y
CONFIG_S390_FLIC=y
CONFIG_S390_FLIC_KVM=$(CONFIG_KVM)
-CONFIG_VFIO_CCW=$(CONFIG_LINUX)
CONFIG_WDT_DIAG288=y
-CONFIG_VFIO_AP=$(CONFIG_LINUX)
CONFIG_S390_CCW_VIRTIO=y
+CONFIG_VFIO=$(CONFIG_LINUX)
+CONFIG_VFIO_CCW=y
+CONFIG_VFIO_AP=y
diff --git a/hw/Makefile.objs b/hw/Makefile.objs
index 22dd211363..e2fcd6aafc 100644
--- a/hw/Makefile.objs
+++ b/hw/Makefile.objs
@@ -30,7 +30,7 @@ devices-dirs-$(CONFIG_SOFTMMU) += ssi/
devices-dirs-$(CONFIG_SOFTMMU) += timer/
devices-dirs-$(CONFIG_TPM) += tpm/
devices-dirs-$(CONFIG_SOFTMMU) += usb/
-devices-dirs-$(CONFIG_LINUX) += vfio/
+devices-dirs-$(CONFIG_VFIO) += vfio/
devices-dirs-$(CONFIG_SOFTMMU) += virtio/
devices-dirs-$(CONFIG_SOFTMMU) += watchdog/
devices-dirs-$(CONFIG_SOFTMMU) += xen/
diff --git a/hw/vfio/Makefile.objs b/hw/vfio/Makefile.objs
index 91805893f7..abad8b818c 100644
--- a/hw/vfio/Makefile.objs
+++ b/hw/vfio/Makefile.objs
@@ -1,8 +1,7 @@
-obj-$(CONFIG_SOFTMMU) += common.o
-obj-$(CONFIG_PCI) += pci.o pci-quirks.o display.o
+obj-y += common.o spapr.o
+obj-$(CONFIG_VFIO_PCI) += pci.o pci-quirks.o display.o
obj-$(CONFIG_VFIO_CCW) += ccw.o
-obj-$(CONFIG_SOFTMMU) += platform.o
+obj-$(CONFIG_VFIO_PLATFORM) += platform.o
obj-$(CONFIG_VFIO_XGMAC) += calxeda-xgmac.o
obj-$(CONFIG_VFIO_AMD_XGBE) += amd-xgbe.o
-obj-$(CONFIG_SOFTMMU) += spapr.o
obj-$(CONFIG_VFIO_AP) += ap.o
--
2.17.1
^ permalink raw reply related [flat|nested] 30+ messages in thread
* Re: [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (26 preceding siblings ...)
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 27/27] hw/vfio/Makefile.objs: Create new CONFIG_* variables for VFIO core and PCI Yang Zhong
@ 2019-02-03 17:25 ` no-reply
2019-02-03 17:52 ` no-reply
28 siblings, 0 replies; 30+ messages in thread
From: no-reply @ 2019-02-03 17:25 UTC (permalink / raw)
To: yang.zhong; +Cc: fam, qemu-devel, pbonzini, thuth
Patchew URL: https://patchew.org/QEMU/20190202072456.6468-1-yang.zhong@intel.com/
Hi,
This series failed the docker-mingw@fedora build test. Please find the testing commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.
=== TEST SCRIPT BEGIN ===
#!/bin/bash
time make docker-test-mingw@fedora SHOW_ENV=1 J=14
=== TEST SCRIPT END ===
Configure options:
--enable-werror --target-list=x86_64-softmmu,aarch64-softmmu --prefix=/tmp/qemu-test/install --python=/usr/bin/python3 --cross-prefix=x86_64-w64-mingw32- --enable-trace-backends=simple --enable-gnutls --enable-nettle --enable-curl --enable-vnc --enable-bzip2 --enable-guest-agent --with-sdlabi=2.0
ERROR: unknown option --with-sdlabi=2.0
Try '/tmp/qemu-test/src/configure --help' for more information
# QEMU configure log Sun Feb 3 17:24:49 UTC 2019
# Configured with: '/tmp/qemu-test/src/configure' '--enable-werror' '--target-list=x86_64-softmmu,aarch64-softmmu' '--prefix=/tmp/qemu-test/install' '--python=/usr/bin/python3' '--cross-prefix=x86_64-w64-mingw32-' '--enable-trace-backends=simple' '--enable-gnutls' '--enable-nettle' '--enable-curl' '--enable-vnc' '--enable-bzip2' '--enable-guest-agent' '--with-sdlabi=2.0'
---
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 617 634 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
config-temp/qemu-conf.c:2:2: error: #error __linux__ not defined
#error __linux__ not defined
^~~~~
---
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 617 686 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
config-temp/qemu-conf.c:2:2: error: #error __i386__ not defined
#error __i386__ not defined
^~~~~
---
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 617 689 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
config-temp/qemu-conf.c:2:2: error: #error __ILP32__ not defined
#error __ILP32__ not defined
^~~~~
---
lines: 92 128 920 0
x86_64-w64-mingw32-gcc -mthreads -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -o config-temp/qemu-conf.exe config-temp/qemu-conf.c -g -liberty
/usr/lib/gcc/x86_64-w64-mingw32/8.2.0/../../../../x86_64-w64-mingw32/bin/ld: cannot find -liberty
collect2: error: ld returned 1 exit status
Failed to run 'configure'
Traceback (most recent call last):
File "./tests/docker/docker.py", line 563, in <module>
The full log is available at
http://patchew.org/logs/20190202072456.6468-1-yang.zhong@intel.com/testing.docker-mingw@fedora/?type=message.
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
` (27 preceding siblings ...)
2019-02-03 17:25 ` [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig no-reply
@ 2019-02-03 17:52 ` no-reply
28 siblings, 0 replies; 30+ messages in thread
From: no-reply @ 2019-02-03 17:52 UTC (permalink / raw)
To: yang.zhong; +Cc: fam, qemu-devel, pbonzini, thuth
Patchew URL: https://patchew.org/QEMU/20190202072456.6468-1-yang.zhong@intel.com/
Hi,
This series failed the docker-mingw@fedora build test. Please find the testing commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.
=== TEST SCRIPT BEGIN ===
#!/bin/bash
time make docker-test-mingw@fedora SHOW_ENV=1 J=14
=== TEST SCRIPT END ===
Configure options:
--enable-werror --target-list=x86_64-softmmu,aarch64-softmmu --prefix=/tmp/qemu-test/install --python=/usr/bin/python3 --cross-prefix=x86_64-w64-mingw32- --enable-trace-backends=simple --enable-gnutls --enable-nettle --enable-curl --enable-vnc --enable-bzip2 --enable-guest-agent --with-sdlabi=2.0
ERROR: unknown option --with-sdlabi=2.0
Try '/tmp/qemu-test/src/configure --help' for more information
# QEMU configure log Sun Feb 3 17:52:17 UTC 2019
# Configured with: '/tmp/qemu-test/src/configure' '--enable-werror' '--target-list=x86_64-softmmu,aarch64-softmmu' '--prefix=/tmp/qemu-test/install' '--python=/usr/bin/python3' '--cross-prefix=x86_64-w64-mingw32-' '--enable-trace-backends=simple' '--enable-gnutls' '--enable-nettle' '--enable-curl' '--enable-vnc' '--enable-bzip2' '--enable-guest-agent' '--with-sdlabi=2.0'
---
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 617 634 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
config-temp/qemu-conf.c:2:2: error: #error __linux__ not defined
#error __linux__ not defined
^~~~~
---
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 617 686 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
config-temp/qemu-conf.c:2:2: error: #error __i386__ not defined
#error __i386__ not defined
^~~~~
---
funcs: do_compiler do_cc compile_object check_define main
lines: 92 122 617 689 0
x86_64-w64-mingw32-gcc -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -c -o config-temp/qemu-conf.o config-temp/qemu-conf.c
config-temp/qemu-conf.c:2:2: error: #error __ILP32__ not defined
#error __ILP32__ not defined
^~~~~
---
lines: 92 128 920 0
x86_64-w64-mingw32-gcc -mthreads -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wall -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -std=gnu99 -o config-temp/qemu-conf.exe config-temp/qemu-conf.c -g -liberty
/usr/lib/gcc/x86_64-w64-mingw32/8.2.0/../../../../x86_64-w64-mingw32/bin/ld: cannot find -liberty
collect2: error: ld returned 1 exit status
Failed to run 'configure'
Traceback (most recent call last):
File "./tests/docker/docker.py", line 563, in <module>
The full log is available at
http://patchew.org/logs/20190202072456.6468-1-yang.zhong@intel.com/testing.docker-mingw@fedora/?type=message.
---
Email generated automatically by Patchew [http://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 30+ messages in thread
end of thread, other threads:[~2019-02-03 18:02 UTC | newest]
Thread overview: 30+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-02 7:24 [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 01/27] arm: disable CONFIG_SERIAL_ISA Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 02/27] ide: split ioport registration to a separate file Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 03/27] vfio: move conditional up to hw/Makefile.objs Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 04/27] hw/pci-host/Makefile.objs: make CONFIGS clear for PCI EXPRESS Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 05/27] build: actually use CONFIG_PAM Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 06/27] hw/i386/Makefile.objs: Build pc_piix* and pc_q35 boards Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 07/27] hw/arm/Makefile.objs: CONFIG_ARM_VIRT created for virt board Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 08/27] hw/m68k/Makefile.objs: Conditionally build boards Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 09/27] hw/microblaze/Makefile.objs: Create configs for petalogix and xilinx boards Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 10/27] hw/mips/Makefile.objs: Create CONFIG_* for r4k, malta, mipssim boards Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 11/27] hw/ppc/Makefile.objs: Build all boards conditinally with CONFIG_* Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 12/27] hw/sh4/Makefile.objs: New CONFIG_* varibales created for sh4 boards and device Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 13/27] hw/s390/Makefile.objs: Create new CONFIG_* variables for s390x boards and devices Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 14/27] hw/sparc/Makefile.objs: CONFIG_* for sun4m and leon3 created Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 15/27] hw/lm32/Makefile.objs: Conditionally build lm32 and milkmyst Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 16/27] hw/xtensa/Makefile.objs: Build xtensa_sim and xtensa_fpga conditionally Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 17/27] hw/nios2/Makefile.objs: Conditionally build nios2 Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 18/27] hw/riscv/Makefile.objs: Create CONFIG_* for riscv boards Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 19/27] hw/sparc64/Makefile.objs: Create CONFIG_* for sparc64 Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 20/27] hw/alpha/Makefile.objs: Create CONFIG_* for alpha Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 21/27] hw/cris/Makefile.objs: Create CONFIG_* for cris Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 22/27] hw/hppa/Makefile.objs: Create CONFIG_* for hppa Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 23/27] hw/moxie/Makefile.objs: Conditionally build moxie Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 24/27] hw/openrisc/Makefile.objs: Create CONFIG_* for openrisc Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 25/27] hw/tricore/Makefile.objs: Create CONFIG_* for tricore Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 26/27] hw/i2c/Makefile.objs: Create new CONFIG_* variables for EEPROM and ACPI controller Yang Zhong
2019-02-02 7:24 ` [Qemu-devel] [PATCH v2 27/27] hw/vfio/Makefile.objs: Create new CONFIG_* variables for VFIO core and PCI Yang Zhong
2019-02-03 17:25 ` [Qemu-devel] [PATCH v2 00/27] make qemu configurable for Kconfig no-reply
2019-02-03 17:52 ` no-reply
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.