From: Abel Vesa <abel.vesa@nxp.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support
Date: Mon, 4 Feb 2019 15:15:41 +0000 [thread overview]
Message-ID: <20190204151541.ntboob335c4rlsrp@fsr-ub1664-175> (raw)
In-Reply-To: <20190204131923.GV30838@bill-the-cat>
On 19-02-04 08:19:23, Tom Rini wrote:
> On Mon, Feb 04, 2019 at 09:03:43AM -0200, Fabio Estevam wrote:
> > On Mon, Feb 4, 2019 at 7:55 AM Abel Vesa <abel.vesa@nxp.com> wrote:
> >
> > > If the SPL size (without the dtb appended) is larger then yes, the build fails.
> > > Trouble is if the SPL (without the dtb appended) is, lets say, 63kB and
> > > then the dtb is larger than 1kB. Then there is no mechanism in place to check that
> > > and it will just fail to boot without giving any clues why. But this is a totally
> > > unrelated problem from this patchset's point of view and I think it impacts all
> > > the platforms that support SPL with DM.
> >
> > Yes, it is unrelated to this series and should be treated separately.
>
> I also agree. But, don't we have a mechanism for that? It sounds like
> some additional targets need to call $(BOARD_SIZE_CHECK) at the end. Or
> am I missing something?
>
Hmm, I believe that is true. I haven't looked deeper into it but it seems
that's the thing the SPL is missing.
> --
> Tom
next prev parent reply other threads:[~2019-02-04 15:15 UTC|newest]
Thread overview: 654+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-01 16:40 [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support Abel Vesa
2019-02-01 16:40 ` [U-Boot] [PATCH v4 01/20] common: spl_fit: Fix the spl_fit_image_get_os for FIT_IMAGE_TINY Abel Vesa
2019-02-01 19:01 ` Tom Rini
2019-02-01 21:08 ` Lukasz Majewski
2019-02-02 9:40 ` Fabio Estevam
2019-02-16 9:23 ` Stefano Babic
2019-02-18 8:27 ` Abel Vesa
2019-02-01 16:40 ` [U-Boot] [PATCH v4 02/20] usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE Abel Vesa
2019-02-02 9:40 ` Fabio Estevam
2019-02-02 21:46 ` Lukasz Majewski
2019-02-01 16:40 ` [U-Boot] [PATCH v4 03/20] usb: ehci-mx6: Make regulator DM_REGULATOR dependent Abel Vesa
2019-02-02 9:41 ` Fabio Estevam
2019-02-02 21:47 ` Lukasz Majewski
2019-02-01 16:40 ` [U-Boot] [PATCH v4 04/20] configs: imx6sabreauto: Add DM_MMC support Abel Vesa
2019-02-02 9:41 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 05/20] configs: imx6sabreauto: Add DM_USB support Abel Vesa
2019-02-02 9:42 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 06/20] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds Abel Vesa
2019-02-02 9:42 ` Fabio Estevam
2019-02-02 21:48 ` Lukasz Majewski
2019-02-01 16:40 ` [U-Boot] [PATCH v4 07/20] board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL Abel Vesa
2019-02-02 9:43 ` Fabio Estevam
2019-02-02 21:48 ` Lukasz Majewski
2019-02-01 16:40 ` [U-Boot] [PATCH v4 08/20] board: mx6sabreauto: " Abel Vesa
2019-02-02 9:43 ` Fabio Estevam
2019-02-02 21:49 ` Lukasz Majewski
2019-02-01 16:40 ` [U-Boot] [PATCH v4 09/20] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files Abel Vesa
2019-02-02 9:44 ` Fabio Estevam
2019-02-02 21:50 ` Lukasz Majewski
2019-02-01 16:40 ` [U-Boot] [PATCH v4 10/20] arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] Abel Vesa
2019-02-02 9:45 ` Fabio Estevam
2019-02-02 21:50 ` Lukasz Majewski
2019-02-01 16:40 ` [U-Boot] [PATCH v4 11/20] configs: mx6sabreauto: Add SPL FIT and DM support Abel Vesa
2019-02-02 9:45 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 12/20] configs: mx6sabresd: " Abel Vesa
2019-02-02 9:45 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 14/20] mx6sabresd: Add DM_GPIO support Abel Vesa
2019-02-02 9:46 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 13/20] mx6sabreauto: " Abel Vesa
2019-02-02 9:46 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 15/20] configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs Abel Vesa
2019-02-02 9:46 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 17/20] board: mx6sabreauto: Remove the non-DM code Abel Vesa
2019-02-02 9:47 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 16/20] configs: mx6sabresd: Add DM_SPI_FLASH necessary configs Abel Vesa
2019-02-02 9:47 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 18/20] board: mx6sabresd: Remove non-DM code Abel Vesa
2019-02-02 9:47 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 19/20] board: mx6sabresd: Remove the enet reset gpio handling Abel Vesa
2019-02-02 9:48 ` Fabio Estevam
2019-02-28 19:01 ` Soeren Moch
2019-02-28 19:24 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 20/20] configs: mx6sabresd: Reduce SPL size by disabling DOS, EXT and EFI support Abel Vesa
2019-02-02 9:49 ` Fabio Estevam
2019-02-01 17:13 ` [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support Fabio Estevam
2019-02-01 17:59 ` Abel Vesa
2019-02-01 18:18 ` Fabio Estevam
2019-02-01 19:01 ` Tom Rini
2019-02-02 9:50 ` Fabio Estevam
2019-02-04 9:55 ` Abel Vesa
2019-02-04 11:03 ` Fabio Estevam
2019-02-04 13:19 ` Tom Rini
2019-02-04 15:15 ` Abel Vesa [this message]
2019-02-04 15:21 ` Simon Goldschmidt
2019-02-04 15:30 ` Tom Rini
2019-02-09 22:48 ` Abel Vesa
2019-02-09 22:55 ` Fabio Estevam
-- strict thread matches above, loose matches on Subject: below --
2019-05-12 20:43 [U-Boot] [PATCH] ARM: imx: apalis_imx6: Drop ad-hoc SATA binding Marek Vasut
2019-05-23 10:48 ` Marcel Ziswiler
2019-04-22 10:41 [U-Boot] [PATCH] ddr: imx8m: hide i.MX8M DDR options from device driver entry Peng Fan
2019-04-17 23:57 [U-Boot] [PATCH v3 00/14] colibri-imx6ull device tree enablement and driver model conversion Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 01/14] tdx-cfg-block: add support for new colibri iMX6ull skus Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 02/14] tdx-cfg-block: simplify i.MX 6 module detection Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 03/14] colibri-imx6ull: set module variant depending on config block Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 04/14] apalis/colibri_imx6/imx6ull: make sure loadaddr does not collide Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 05/14] colibri-imx6ull: fix ethernet phy power on Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 06/14] board: imx6ull: Add disable PMIC_STBY_REQ Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 07/14] colibri-imx6ull: configuration clean-up Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 08/14] colibri-imx6ull: migrate pinctrl and regulators to dtb/dm Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 09/14] colibri-imx6ull: migrate mmc to using driver model Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 10/14] colibri-imx6ull: migrate usb " Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 11/14] colibri-imx6ull: migrate fec " Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 12/14] ARM: dts: colibri-imx6ull: fix uart-has-rtscts property Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 13/14] ARM: dts: colibri-imx6ull: add osc32k_32k_out pinctrl Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 14/14] ARM: dts: colibri-imx6ull: update device tree Marcel Ziswiler
2019-04-17 23:47 [U-Boot] [PATCH v3] ARM: dts: i.MX6Q: fix avoid_unnecessary_addr_size warnings Marcel Ziswiler
2019-04-17 9:41 [U-Boot] [PATCH] imx: i.MX8MQ: clear ocotp error bit Peng Fan
2019-04-17 9:41 ` [U-Boot] [PATCH 1/2] mxc_ocotp: Update redundancy banks for mx7ulp B0 Peng Fan
2019-04-17 9:41 ` [U-Boot] [PATCH 2/2] mxc_ocotp: Disable fuse sense for imx8mq B1 Peng Fan
2019-04-15 12:00 [U-Boot] [PATCH] imx: 8qxp_mek: fix fdt_file and console Peng Fan
2019-04-15 13:31 ` Fabio Estevam
2019-04-26 18:42 ` [U-Boot] [REGRESSION] " Marcel Ziswiler
2019-04-27 0:11 ` Peng Fan
2019-04-15 9:13 [U-Boot] [PATCH v2 1/2] ARM: imx6: DHCOM i.MX6 PDK: use Kconfig for inclusion of DDR calibration Ludwig Zenz
2019-04-15 5:20 [U-Boot] [PATCH] imx: add lowlevel init for ARM64 Peng Fan
2019-04-26 18:38 ` [U-Boot] [REGRESSION] " Marcel Ziswiler
2019-04-26 23:58 ` Peng Fan
2019-04-28 16:52 ` Stefano Babic
2019-04-28 18:24 ` Joe Hershberger
2019-04-28 23:33 ` Marcel Ziswiler
2019-04-13 8:21 [U-Boot] [PATCH] ARM: imx: Fix typo in select option for ZMX25 Chris Packham
2019-04-15 16:32 ` Fabio Estevam
2019-04-15 16:50 ` Stefano Babic
2019-04-12 7:54 [U-Boot] [PATCH 1/8] imx: sip: add call_imx_sip_ret2 Peng Fan
2019-04-12 7:54 ` [U-Boot] [PATCH 2/8] imx8: fuse: add fuse driver Peng Fan
2019-04-12 7:54 ` [U-Boot] [PATCH 3/8] imx8qxp: mek: Enable CMD_FUSE Peng Fan
2019-04-12 7:55 ` [U-Boot] [PATCH 4/8] misc: imx8: add sc_misc_get_temp Peng Fan
2019-04-12 7:55 ` [U-Boot] [PATCH 5/8] thermal: add i.MX8 thermal driver Peng Fan
2019-04-12 7:55 ` [U-Boot] [PATCH 6/8] imx8: cpu: get temperature when print cpu desc Peng Fan
2019-04-25 10:35 ` Stefano Babic
2019-04-25 13:46 ` Peng Fan
2019-04-25 14:23 ` Stefano Babic
2019-04-12 7:55 ` [U-Boot] [PATCH 7/8] imx: imx8dx/qxp: enable thermal Peng Fan
2019-04-12 7:55 ` [U-Boot] [PATCH 8/8] imx8: mek: move HUSH_PARSER to defconfig Peng Fan
2019-04-09 15:25 [U-Boot] [PATCH v2 0/5] colibri imx8qxp 2gb wb it v1.0b module support Marcel Ziswiler
2019-04-09 15:25 ` [U-Boot] [PATCH v2 1/5] misc: imx8: remove duplicates from scfw api Marcel Ziswiler
2019-04-09 15:25 ` [U-Boot] [PATCH v2 2/5] arm: dts: imx8dx: add lpuart1, lpuart2, lpuart3 Marcel Ziswiler
2019-04-09 15:25 ` [U-Boot] [PATCH v2 3/5] board: toradex: tdx-cfg-block: clean-up sku handling Marcel Ziswiler
2019-04-09 15:25 ` [U-Boot] [PATCH v2 4/5] board: toradex: tdx-cfg-block: add new skus Marcel Ziswiler
2019-04-09 15:25 ` [U-Boot] [PATCH v2 5/5] board: toradex: add colibri imx8qxp 2gb wb it v1.0b module support Marcel Ziswiler
2019-04-11 10:47 ` Igor Opaniuk
2019-04-26 9:20 ` Marcel Ziswiler
2019-04-26 9:46 ` Stefano Babic
2019-04-26 9:58 ` Marcel Ziswiler
2019-04-26 10:39 ` Stefano Babic
2019-04-25 10:48 ` Stefano Babic
2019-04-25 12:35 ` Marcel Ziswiler
2019-04-25 14:52 ` Stefano Babic
2019-04-26 2:10 ` Peng Fan
2019-04-26 8:38 ` Stefano Babic
2019-04-26 8:53 ` Peng Fan
2019-04-26 8:54 ` Marcel Ziswiler
2019-04-26 9:03 ` Peng Fan
2019-04-26 9:38 ` Marcel Ziswiler
2019-04-26 9:59 ` Peng Fan
2019-04-09 15:24 [U-Boot] [PATCH v2 00/14] colibri-imx6ull device tree enablement and driver model conversion Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 01/14] tdx-cfg-block: add support for new colibri iMX6ull skus Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 02/14] tdx-cfg-block: simplify i.MX 6 module detection Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 03/14] colibri-imx6ull: set module variant depending on config block Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 04/14] apalis/colibri_imx6/imx6ull: make sure loadaddr does not collide Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 05/14] colibri-imx6ull: fix ethernet phy power on Marcel Ziswiler
2019-04-11 8:05 ` Igor Opaniuk
2019-04-09 15:24 ` [U-Boot] [PATCH v2 06/14] board: imx6ull: Add disable PMIC_STBY_REQ Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 07/14] colibri-imx6ull: configuration clean-up Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 08/14] colibri-imx6ull: migrate pinctrl and regulators to dtb/dm Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 09/14] colibri-imx6ull: migrate mmc to using driver model Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 10/14] colibri-imx6ull: migrate usb " Marcel Ziswiler
2019-04-17 7:58 ` Igor Opaniuk
2019-04-09 15:24 ` [U-Boot] [PATCH v2 11/14] colibri-imx6ull: migrate fec " Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 12/14] ARM: dts: colibri-imx6ull: fix uart-has-rtscts property Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 13/14] ARM: dts: colibri-imx6ull: add osc32k_32k_out pinctrl Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 14/14] ARM: dts: colibri-imx6ull: update device tree Marcel Ziswiler
2019-04-04 10:26 [U-Boot] [imx-next PATCH v1 00/14] imx: Fully convert HSC|DDC K+P i.MX53 based boards to use DM/DTS Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 01/14] ARM: Remove HSC|DDC ETH PHY reset code after switching to DM/DTS Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 02/14] DTS: Add esdhc3 device tree description tuning for HSC|DDC boards Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 03/14] ARM: Enable CONFIG_DM_MMC and CONFIG_DM_BLK on HSC and DDC boards Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 04/14] ARM: defconfig: Move CONFIG_FSL_ESDHC to Kconfig Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 05/14] ARM: Remove non DM/DTS esdhc3 code from HSC|DDC board related files Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 06/14] ARM: kp_imx53: config: Do not use ${boardtype} to setup update wic file Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 07/14] DTS: Provide USB host DTS description for i.MX53 devices Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 08/14] DTS: Enable USB host support (including regulators) on HSC|DDC boards Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 09/14] ARM: Remove EHCI specific code from HSC|DDC board file Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 10/14] USB: DM: Convert i.MX5 ehci code to driver model Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 11/14] ARM: defconfig: kp_imx53: Enable DM_USB support on HSC|DDC boards Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 12/14] ARM: config: Remove not needed CONFIG_MXC_USB_PORT define Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 13/14] Convert CONFIG_USB_EHCI_MX5 to Kconfig Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 14/14] boot.src: Provide dsa_core.blacklist bootarg when booting via NFS Lukasz Majewski
2019-03-28 22:25 [U-Boot] [PATCH v1] colibri_vf: fix tab vs. spaces Marcel Ziswiler
2019-03-29 11:27 ` Igor Opaniuk
2019-03-28 22:24 [U-Boot] [PATCH v1] colibri_vf: fix ethernet by adding explicit phy node Marcel Ziswiler
2019-03-29 5:54 ` Hannes Schmelzer
2019-03-29 11:25 ` Igor Opaniuk
2019-03-25 16:24 [U-Boot] [PATCH v2 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
2019-03-25 16:24 ` [U-Boot] [PATCH v2 01/22] Add missing space in comment Marcel Ziswiler
2019-03-25 16:24 ` [U-Boot] [PATCH v2 02/22] vf610: ddrmc: add missing include Marcel Ziswiler
2019-04-01 8:18 ` Lukasz Majewski
2019-03-25 16:24 ` [U-Boot] [PATCH v2 03/22] imx: bootaux: add dependency on vf610 Marcel Ziswiler
2019-04-01 8:18 ` Lukasz Majewski
2019-03-25 16:24 ` [U-Boot] [PATCH v2 04/22] configs: move CONFIG_USB_EHCI_VF to Kconfig Marcel Ziswiler
[not found] ` <swarren@nvidia.com>
2019-04-01 8:18 ` Lukasz Majewski
2019-03-25 16:24 ` [U-Boot] [PATCH v2 05/22] configs: colibri_vf: remove obsolete mmc/sd card environment Marcel Ziswiler
2019-04-01 8:19 ` Lukasz Majewski
2019-03-25 16:24 ` [U-Boot] [PATCH v2 06/22] configs: colibri_vf: limit size of malloc() pool before relocation Marcel Ziswiler
2019-04-01 8:19 ` Lukasz Majewski
2019-03-25 16:24 ` [U-Boot] [PATCH v2 07/22] configs: move CONFIG_MXC_OCOTP to Kconfig Marcel Ziswiler
2019-03-25 16:24 ` [U-Boot] [PATCH v2 08/22] ARM: dts: colibri_vf: update device trees Marcel Ziswiler
2019-03-25 16:24 ` [U-Boot] [PATCH v2 09/22] configs: colibri_vf: disable obscure options Marcel Ziswiler
2019-03-28 16:58 ` Igor Opaniuk
2019-03-29 9:08 ` Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 10/22] colibri_vf: migrate pinctrl and regulators to dtb/dm Marcel Ziswiler
2019-03-28 15:09 ` Igor Opaniuk
2019-03-25 16:25 ` [U-Boot] [PATCH v2 11/22] colibri_vf: migrate fec, esdhc, nfc and usb to driver model Marcel Ziswiler
2019-03-28 14:43 ` Igor Opaniuk
2019-03-25 16:25 ` [U-Boot] [PATCH v2 12/22] config: colibri_vf: use macros from linux/sizes.h Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 13/22] colibri_vf: add distroboot support Marcel Ziswiler
2019-03-28 15:01 ` Igor Opaniuk
2019-03-28 15:20 ` Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 14/22] colibri_vf: set fdtfile for distroboot Marcel Ziswiler
2019-03-28 15:06 ` Igor Opaniuk
2019-03-25 16:25 ` [U-Boot] [PATCH v2 15/22] colibri_vf: sync the board info message Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 16/22] colibri_vf: enable user debug by default Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 17/22] colibri_vf: disable undefined instruction events in user debug Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 18/22] config: colibri_vf: enable mtd partitions via dt Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 19/22] arm: vf610: add uart2 clock/pinmux support Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 20/22] colibri_vf: adjust timing according to data sheet Marcel Ziswiler
2019-03-28 16:41 ` Igor Opaniuk
2019-03-25 16:25 ` [U-Boot] [PATCH v2 21/22] colibri_vf: use leveling evaluated by DDR validation tools Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 22/22] colibri_vf: fix sdboot for vybrid modules Marcel Ziswiler
2019-03-18 22:29 [U-Boot] [PATCH 00/17] Convert some imx6 boards to DM_VIDEO Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 01/17] video: ipuv3: add DM_VIDEO support Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 02/17] video: move ipuv3 files to subdirectory Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 03/17] imx: move CONFIG_VIDEO_IPUV3 to defconfigs Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 04/17] imx6: dts: add 'u-boot, dm-pre-reloc' to soc and ipu nodes Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 05/17] apalis_imx6: convert to DM_VIDEO Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 06/17] imx6: icore: " Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 07/17] imx6: ge_bx50v3: " Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 08/17] colibri_imx6: " Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 09/17] mx6sabresd: " Anatolij Gustschin
2019-09-16 18:18 ` Fabio Estevam
2019-09-16 19:21 ` Anatolij Gustschin
2019-09-16 19:50 ` Anatolij Gustschin
2019-09-17 12:32 ` Fabio Estevam
2019-09-17 21:42 ` Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 10/17] mx6sabreauto: " Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 11/17] imx6: wandboard: add device tree Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 12/17] imx6: wandboard: convert to DM_GPIO and enable pinctrl driver Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 13/17] imx6: wandboard: convert to DM_USB Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 14/17] imx6: wandboard: convert to DM_VIDEO Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 15/17] imx6: wandboard: convert to DM_PMIC Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 16/17] imx6: wandboard: convert to DM_I2C Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 17/17] imx6: wandboard: convert to DM_MMC Anatolij Gustschin
2019-03-18 22:37 ` [U-Boot] [PATCH 00/17] Convert some imx6 boards to DM_VIDEO Anatolij Gustschin
2019-03-20 13:25 ` Fabio Estevam
2019-03-20 13:38 ` Anatolij Gustschin
2019-03-20 13:40 ` Fabio Estevam
2019-03-07 12:43 [U-Boot] [PATCH] imx8qxp: mek: enable dm-spl for pm Peng Fan
2019-03-18 8:43 ` Peng Fan
2019-04-09 12:47 ` Peng Fan
2019-03-05 2:32 [U-Boot] [PATCH RESEND 01/10] pinctrl: imx8: add i.MX8QM compatible Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 02/10] dt-bindings: pinctrl: add i.MX8QM pads definition Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 03/10] dt-bindings: clock: dt-bindings: pinctrl: add i.MX8QM clocks definition Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 04/10] arm: dts: introduce dtsi for i.MX8QM Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 05/10] imx8: add cpu support Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 06/10] clk: imx8: split code into common and soc specific part Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 07/10] clk: imx8: add i.MX8QM clk driver Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 08/10] imx8: imx8-pins: add i.MX8QM Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 09/10] misc: imx8: scu: add i.MX8QM support Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 10/10] imx: support i.MX8QM MEK board Peng Fan
2019-04-09 12:48 ` Peng Fan
2019-03-18 8:42 ` [U-Boot] [PATCH RESEND 01/10] pinctrl: imx8: add i.MX8QM compatible Peng Fan
2019-03-01 12:10 [U-Boot] [PATCH 00/10] tbs2910 fixes and driver model conversion Soeren Moch
2019-03-01 12:10 ` [U-Boot] [PATCH 01/10] board: tbs2910: Fix default environment Soeren Moch
2019-03-14 19:16 ` Soeren Moch
2019-03-14 19:18 ` Stefano Babic
2019-03-01 12:10 ` [U-Boot] [PATCH 02/10] board: tbs2910: Remove efi loader support in defconfig to reduce u-boot size Soeren Moch
2019-04-01 8:59 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-03-01 12:10 ` [U-Boot] [PATCH 03/10] board: tbs2910: Add device tree Soeren Moch
2019-04-01 8:59 ` [U-Boot] [U-Boot,03/10] " sbabic at denx.de
2019-03-01 12:10 ` [U-Boot] [PATCH 04/10] board: tbs2910: Add pinctrl driver and convert gpio to driver model Soeren Moch
2019-04-01 8:52 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-03-01 12:10 ` [U-Boot] [PATCH 05/10] board: tbs2910: Convert usb " Soeren Moch
2019-04-01 8:52 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-03-01 12:10 ` [U-Boot] [PATCH 06/10] board: tbs2910: Convert i2c and rtc " Soeren Moch
2019-04-01 8:59 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-03-01 12:10 ` [U-Boot] [PATCH 07/10] ata: dwc_ahsata: Fix sector reports for large disks Soeren Moch
2019-04-01 8:52 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-03-01 12:10 ` [U-Boot] [PATCH 08/10] ata: dwc_ahsata: Add ahci driver model support Soeren Moch
2019-03-07 8:33 ` Soeren Moch
2019-03-08 20:19 ` Soeren Moch
[not found] ` <smoch@web.de>
[not found] ` <marcel@ziswiler.com>
2019-04-01 8:59 ` [U-Boot] [U-Boot, 09/10] board: tbs2910: Convert sata to ahci driver model sbabic at denx.de
2019-03-01 12:11 ` [U-Boot] [PATCH " Soeren Moch
2019-03-01 12:11 ` [U-Boot] [PATCH 10/10] board: tbs2910: Convert mmc to " Soeren Moch
2019-04-01 8:59 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-02-13 21:46 [U-Boot] [PATCH v4 00/22] imx: vybrid: Update BK4 and PCM052 boards to only use DM/DTS Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 01/22] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 02/22] net: Kconfig: FEC: Add dependency on VF610 Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 03/22] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 04/22] vybrid: clock: Provide enable_i2c_clk() function for Vybrid Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 05/22] pcm052: board: Do not enable I2C2 code in the board file Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 06/22] vybrid: Define the imx_get_mac_from_fuse() as a __weak function Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 07/22] pcm052: board: Remove "m4go" command as it is superseded by "bootaux" Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 08/22] pcm052: board: vybrid: Update the board name for BK4 device Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 09/22] ARM: DTS: vybrid: Update vf.dtsi file to descibe more vf610 hardware Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 10/22] pcm052: board: cosmetic: Add copyright notice to pcm052.c Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 11/22] ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052) Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 12/22] ARM: DTS: Provide vf610-bk4r1-u-boot.dtsi for U-Boot specific properties Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 13/22] defconfig: bk4/pcm052: Update bk4r1|pcm052_defconfig to support DM/DT Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 14/22] config: pcm052: Use SZ_X{MK} from linux/sizes.h for include/configs/pcm052.h Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 15/22] config: bk4: Update include/configs/bk4r1.h file Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 16/22] pcm052: board: Remove in-board setup code (it is now replaced by DM setup) Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 17/22] config: bk4: Update u-boot script to support recovery via SD card Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 18/22] config: bk4: Update u-boot envs to support NOR memories initial setup Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 19/22] pcm052: bk4: sdcard: Add support for SD card booting/recovery Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 20/22] pcm052: board: Add code to setup LED default states Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 21/22] pcm052: mac: Provide board specific imx_get_mac_from_fuse() function Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 22/22] pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy Lukasz Majewski
2019-03-04 22:26 ` Joe Hershberger
2019-03-04 22:35 ` Lukasz Majewski
2019-02-08 17:42 [U-Boot] [PATCH v1 00/26] colibri imx6 fixes, device tree enablement and driver model conversion Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 01/26] colibri_imx6: get rid of obsolete nospl configurations Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 02/26] colibri_imx6: use distro defaults Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 03/26] colibri_imx6: move console in env from header file to defconfig Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 04/26] colibri_imx6: enable fit image, gpt, imx thermal, efi loader support Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 05/26] colibri_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 06/26] colibri_imx6: migrate to using device tree Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 07/26] colibri_imx6: clean-up and migrate gpios to using driver model Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 08/26] colibri_imx6: enable pin control driver Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 09/26] colibri_imx6: migrate i2c to using driver model Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 10/26] colibri_imx6: migrate pmic and regulator " Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 11/26] colibri_imx6: migrate mmc " Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 12/26] colibri_imx6: migrate usb " Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 13/26] colibri_imx6: drop CONFIG_OF_SYSTEM_SETUP Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 14/26] colibri_imx6: print also 64-bit IT Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 15/26] colibri_imx6: add distroboot support Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 16/26] colibri_imx6: unify sd/mmc drive strenght with linux kernel settings Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 17/26] colibri imx6: pf0100: reorder and cleanup message printing Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 18/26] colibri imx6: disable ri and dcd irq in uarts Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 19/26] colibri_imx6: change pmic fusing according to hw 1.1 requirements Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 20/26] colibri_imx6: revert fuse value set in mfgr_fuse Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 21/26] toradex: colibri_imx6: overwrite CMA memory set in device tree Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 22/26] configs: colibri_imx6: Use ext4 file system by default Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 23/26] colibri_imx6: use SDP if USB serial downloader has been used Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 24/26] colibri_imx6: switch to zimage Marcel Ziswiler
2019-02-08 21:42 ` Lukasz Majewski
2019-02-08 21:48 ` Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 25/26] colibri_imx6: added nreset gpio on reboot Marcel Ziswiler
[not found] ` <gerard.salvatella@toradex.com>
[not found] ` <igor.opaniuk@toradex.com>
[not found] ` <support.arm@toradex.com>
2019-04-26 9:37 ` [U-Boot] [U-Boot, v3, 14/14] ARM: dts: colibri-imx6ull: update device tree sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, v2, 12/14] ARM: dts: colibri-imx6ull: fix uart-has-rtscts property sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, v3, 13/14] ARM: dts: colibri-imx6ull: add osc32k_32k_out pinctrl sbabic at denx.de
[not found] ` <antti.maentausta@ge.com>
2019-04-26 9:38 ` [U-Boot] [U-Boot, imx-next, v1, 13/14] Convert CONFIG_USB_EHCI_MX5 to Kconfig sbabic at denx.de
2019-02-08 17:42 ` [U-Boot] [PATCH v1 26/26] board: colibri_imx6: check for and report ecc errors in fuses Marcel Ziswiler
2019-02-08 17:12 [U-Boot] [PATCH v2 00/23] apalis imx6 fixes, device tree enablement and driver model conversion Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 01/23] apalis_imx6: get rid of obsolete nospl configurations Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 02/23] apalis_imx6: use distro defaults Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 03/23] apalis_imx6: move console in env from header file to defconfig Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 04/23] apalis_imx6: enable fit image, gpt, imx thermal, efi loader support Marcel Ziswiler
2019-03-12 10:45 ` Igor Opaniuk
2019-02-08 17:12 ` [U-Boot] [PATCH v2 05/23] apalis_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration Marcel Ziswiler
2019-03-12 10:46 ` Igor Opaniuk
2019-02-08 17:12 ` [U-Boot] [PATCH v2 06/23] apalis_imx6: migrate to using device tree Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 07/23] apalis_imx6: clean-up and migrate gpios to using driver model Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 08/23] apalis_imx6: enable pin control driver Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 09/23] apalis_imx6: migrate i2c to using driver model Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 10/23] apalis_imx6: migrate pmic and regulator " Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 11/23] apalis_imx6: migrate mmc and sata " Marcel Ziswiler
2019-02-25 10:39 ` Soeren Moch
2019-03-01 12:20 ` Soeren Moch
2019-03-01 12:29 ` Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 12/23] apalis_imx6: migrate usb " Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 13/23] apalis_imx6: drop CONFIG_OF_SYSTEM_SETUP Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 14/23] apalis_imx6: add distroboot support Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 15/23] apalis_imx6: use both sd/mmc interfaces for setsdupdate Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 16/23] apalis_imx6: unify sd/mmc drive strength with linux kernel settings Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 17/23] apalis_imx6: pf0100: reorder and cleanup message printing Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 18/23] apalis_imx6: disable ri and dcd irq in uarts Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 19/23] apalis_imx6: revert fuse value set in mfgr_fuse Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 20/23] configs: apalis_imx6: Use ext4 file system by default Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 21/23] apalis_imx6: use SDP if USB serial downloader has been used Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 22/23] apalis_imx6: switch to zimage Marcel Ziswiler
[not found] ` <bhuvanchandra.dv@toradex.com>
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 15/22] colibri_vf: sync the board info message sbabic at denx.de
2019-02-08 17:12 ` [U-Boot] [PATCH v2 23/23] board: apalis_imx6: check for and report ecc errors in fuses Marcel Ziswiler
2019-02-01 15:04 [U-Boot] [PATCH v1 0/3] imx: cpu.c, serial_mxc, dts fixes/improvements Marcel Ziswiler
2019-02-01 15:04 ` [U-Boot] [PATCH v1 1/3] ARM: dts: i.MX6Q, i.MX6QDL: fix address/size-cells warnings Marcel Ziswiler
[not found] ` <trini@konsulko.com>
2019-02-16 10:26 ` [U-Boot] [U-Boot, v1, " sbabic at denx.de
2019-02-01 15:04 ` [U-Boot] [PATCH v1 2/3] imx: serial_mxc: disable ri and dcd irq in dte mode Marcel Ziswiler
2019-02-15 12:26 ` Stefano Babic
2019-02-01 15:04 ` [U-Boot] [PATCH v1 3/3] imx: cpu.c: give access to reset cause in spl Marcel Ziswiler
2019-01-18 8:58 [U-Boot] [PATCH] imx8: cpu: restrict checking ROM passover info for revA Peng Fan
[not found] ` <uboot-imx@nxp.com>
2019-01-30 8:57 ` [U-Boot] " sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot, V2, 06/10] dts: imx8qxp-mek: introduce u-boot dtsi sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot,V2,08/10] imx: build flash.bin for i.MX8 sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot,V2,10/10] imx8qxp: mek: update README sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot,V2,09/10] imx8qxp: mek: default enable SPL sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot,V2,01/10] imx8qxp: add SUPPORT_SPL option sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot,V2,03/10] arm: imx: build mach-imx for i.MX8 sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot, V2, 07/10] imx: mkimage_fit_atf: introduce BL33_BASE_ADDR sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot,V2,05/10] spl: imx8: add spl boot device sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot,V2,04/10] gpio: introduce CONFIG_SPL_DM_PCA953X sbabic at denx.de
2019-01-30 9:15 ` [U-Boot] [U-Boot,V2,02/10] imx8: scu: use dedicated MU for SPL sbabic at denx.de
[not found] ` <peng.fan@nxp.com>
2019-02-16 10:26 ` [U-Boot] [U-Boot,v4,18/20] board: mx6sabresd: Remove non-DM code sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 17/20] board: mx6sabreauto: Remove the " sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 07/20] board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 15/20] configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 05/20] configs: imx6sabreauto: Add DM_USB support sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 06/20] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 09/20] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 12/20] configs: mx6sabresd: Add SPL FIT and DM support sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 04/20] configs: imx6sabreauto: Add DM_MMC support sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 01/20] common: spl_fit: Fix the spl_fit_image_get_os for FIT_IMAGE_TINY sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 16/20] configs: mx6sabresd: Add DM_SPI_FLASH necessary configs sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 19/20] board: mx6sabresd: Remove the enet reset gpio handling sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot, v4, 03/20] usb: ehci-mx6: Make regulator DM_REGULATOR dependent sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot, v4, 20/20] configs: mx6sabresd: Reduce SPL size by disabling DOS, EXT and EFI support sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot,v4,13/20] mx6sabreauto: Add DM_GPIO support sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot, v4, 11/20] configs: mx6sabreauto: Add SPL FIT and DM support sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot, v4, 08/20] board: mx6sabreauto: Add board_fit_config_name_match to support FIT in SPL sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot, v4, 10/20] arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot,v4,14/20] mx6sabresd: Add DM_GPIO support sbabic at denx.de
2019-02-16 10:45 ` [U-Boot] [U-Boot, v4, 02/20] usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v4, 19/22] pcm052: bk4: sdcard: Add support for SD card booting/recovery sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 19/22] arm: vf610: add uart2 clock/pinmux support sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,v2,02/22] vf610: ddrmc: add missing include sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot,v2,03/22] imx: bootaux: add dependency on vf610 sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot,RESEND,07/10] clk: imx8: add i.MX8QM clk driver sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] ARM: imx: Fix typo in select option for ZMX25 sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot,RESEND,05/10] imx8: add cpu support sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] imx: 8qxp_mek: fix fdt_file and console sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot,2/2] mxc_ocotp: Disable fuse sense for imx8mq B1 sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, 1/2] mxc_ocotp: Update redundancy banks for mx7ulp B0 sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot,3/8] imx8qxp: mek: Enable CMD_FUSE sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, imx-next, v1, 03/14] ARM: Enable CONFIG_DM_MMC and CONFIG_DM_BLK on HSC and DDC boards sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, RESEND, 03/10] dt-bindings: clock: dt-bindings: pinctrl: add i.MX8QM clocks definition sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot,RESEND,10/10] imx: support i.MX8QM MEK board sbabic at denx.de
2019-04-26 10:50 ` Marcel Ziswiler
2019-04-26 10:56 ` Stefano Babic
2019-04-26 9:37 ` [U-Boot] [U-Boot,1/8] imx: sip: add call_imx_sip_ret2 sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, RESEND, 01/10] pinctrl: imx8: add i.MX8QM compatible sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] imx: i.MX8MQ: clear ocotp error bit sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, imx-next, v1, 11/14] ARM: defconfig: kp_imx53: Enable DM_USB support on HSC|DDC boards sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, RESEND, 09/10] misc: imx8: scu: add i.MX8QM support sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot, RESEND, 06/10] clk: imx8: split code into common and soc specific part sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot,2/8] imx8: fuse: add fuse driver sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] ddr: imx8m: hide i.MX8M DDR options from device driver entry sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot, RESEND, 04/10] arm: dts: introduce dtsi for i.MX8QM sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] imx8qxp: mek: enable dm-spl for pm sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot, RESEND, 02/10] dt-bindings: pinctrl: add i.MX8QM pads definition sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot,RESEND,08/10] imx8: imx8-pins: add i.MX8QM sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] imx: add lowlevel init for ARM64 sbabic at denx.de
2019-04-26 9:55 ` [U-Boot] [U-Boot,8/8] imx8: mek: move HUSH_PARSER to defconfig sbabic at denx.de
2019-01-08 11:42 [U-Boot] [PATCH v2 00/11] arm: Colibri iMX7 fixes and DM_MMC conversion Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 01/11] colibri_imx7: fix boot commands Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 02/11] arm: dts: imx7: colibri: split dt for raw NAND and eMMC devices Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 03/11] configs: colibri_imx7: enable DM for raw NAND devices Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 04/11] configs: colibri_imx7: use separate device tree Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 05/11] arm: dts: imx7: colibri: add usdhci peripherals to " Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 06/11] configs: colibri_imx7: use DM_MMC Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 07/11] colibri_imx7: drop legacy usdhc support Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 08/11] configs: colibri_imx7: enable CAAM driver Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 09/11] configs: colibri_imx7: use DFU for NAND instead of MMC Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 10/11] configs: colibri_imx7: use distro defaults Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 11/11] configs: add default configuraiton for Colibri iMX7 with eMMC Stefan Agner
[not found] ` <stefan.agner@toradex.com>
[not found] ` <martyn.welch@collabora.com>
[not found] ` <ian.ray@ge.com>
2019-03-13 9:28 ` [U-Boot] [U-Boot,v1,15/26] colibri_imx6: add distroboot support sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot,v2,14/23] apalis_imx6: " sbabic at denx.de
2019-03-13 9:30 ` [U-Boot] [U-Boot, v1, 23/26] colibri_imx6: use SDP if USB serial downloader has been used sbabic at denx.de
[not found] ` <marcel.ziswiler@toradex.com>
[not found] ` <max.krummenacher@toradex.com>
[not found] ` <Ken.Lin@advantech.com.tw>
2019-01-30 8:57 ` [U-Boot] [U-Boot, v2, 11/11] configs: add default configuraiton for Colibri iMX7 with eMMC sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot, v2, 04/11] configs: colibri_imx7: use separate device tree sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot, v2, 10/11] configs: colibri_imx7: use distro defaults sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot, v2, 02/11] arm: dts: imx7: colibri: split dt for raw NAND and eMMC devices sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot, v2, 07/11] colibri_imx7: drop legacy usdhc support sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot,v2,01/11] colibri_imx7: fix boot commands sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot, v2, 03/11] configs: colibri_imx7: enable DM for raw NAND devices sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot,v2,06/11] configs: colibri_imx7: use DM_MMC sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot, v2, 09/11] configs: colibri_imx7: use DFU for NAND instead of MMC sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot, v2, 05/11] arm: dts: imx7: colibri: add usdhci peripherals to device tree sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot, v2, 08/11] configs: colibri_imx7: enable CAAM driver sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot, v1, 2/3] imx: serial_mxc: disable ri and dcd irq in dte mode sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v1, 25/26] colibri_imx6: added nreset gpio on reboot sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v1, 11/26] colibri_imx6: migrate mmc to using driver model sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v2, 10/23] apalis_imx6: migrate pmic and regulator " sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v1, 17/26] colibri imx6: pf0100: reorder and cleanup message printing sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v1, 22/26] configs: colibri_imx6: Use ext4 file system by default sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot,v1,14/26] colibri_imx6: print also 64-bit IT sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 13/23] apalis_imx6: drop CONFIG_OF_SYSTEM_SETUP sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot,v2,02/23] apalis_imx6: use distro defaults sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 07/23] apalis_imx6: clean-up and migrate gpios to using driver model sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 12/23] apalis_imx6: migrate usb " sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v1, 12/26] colibri_imx6: " sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 15/23] apalis_imx6: use both sd/mmc interfaces for setsdupdate sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 16/23] apalis_imx6: unify sd/mmc drive strength with linux kernel settings sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v1, 05/26] colibri_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v1, 08/26] colibri_imx6: enable pin control driver sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 19/23] apalis_imx6: revert fuse value set in mfgr_fuse sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot,v2,22/23] apalis_imx6: switch to zimage sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot,v1,02/26] colibri_imx6: use distro defaults sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 03/23] apalis_imx6: move console in env from header file to defconfig sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v1, 21/26] toradex: colibri_imx6: overwrite CMA memory set in device tree sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot,v1,24/26] colibri_imx6: switch to zimage sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 06/23] apalis_imx6: migrate to using device tree sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 20/23] configs: apalis_imx6: Use ext4 file system by default sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v1, 19/26] colibri_imx6: change pmic fusing according to hw 1.1 requirements sbabic at denx.de
2019-03-13 9:30 ` [U-Boot] [U-Boot, v1, 10/26] colibri_imx6: migrate pmic and regulator to using driver model sbabic at denx.de
2019-03-13 9:30 ` [U-Boot] [U-Boot, v2, 18/23] apalis_imx6: disable ri and dcd irq in uarts sbabic at denx.de
2019-03-13 9:30 ` [U-Boot] [U-Boot, v2, 09/23] apalis_imx6: migrate i2c to using driver model sbabic at denx.de
2019-03-13 9:30 ` [U-Boot] [U-Boot, v2, 01/23] apalis_imx6: get rid of obsolete nospl configurations sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 18/26] colibri imx6: disable ri and dcd irq in uarts sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 03/26] colibri_imx6: move console in env from header file to defconfig sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 06/26] colibri_imx6: migrate to using device tree sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 26/26] board: colibri_imx6: check for and report ecc errors in fuses sbabic at denx.de
2019-03-24 21:42 ` Marcel Ziswiler
2019-03-25 12:14 ` Stefano Babic
2019-03-13 9:38 ` [U-Boot] [U-Boot, v2, 11/23] apalis_imx6: migrate mmc and sata to using driver model sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 04/26] colibri_imx6: enable fit image, gpt, imx thermal, efi loader support sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 09/26] colibri_imx6: migrate i2c to using driver model sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 16/26] colibri_imx6: unify sd/mmc drive strenght with linux kernel settings sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot,v2,08/23] apalis_imx6: enable pin control driver sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 01/26] colibri_imx6: get rid of obsolete nospl configurations sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 07/26] colibri_imx6: clean-up and migrate gpios to using driver model sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 20/26] colibri_imx6: revert fuse value set in mfgr_fuse sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v2, 17/23] apalis_imx6: pf0100: reorder and cleanup message printing sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 13/26] colibri_imx6: drop CONFIG_OF_SYSTEM_SETUP sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v2, 05/23] apalis_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v2, 23/23] board: apalis_imx6: check for and report ecc errors in fuses sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v2, 04/23] apalis_imx6: enable fit image, gpt, imx thermal, efi loader support sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,13/17] imx6: wandboard: convert to DM_USB sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,11/17] imx6: wandboard: add device tree sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,17/17] imx6: wandboard: convert to DM_MMC sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,08/17] colibri_imx6: convert to DM_VIDEO sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,10/17] mx6sabreauto: " sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, 03/17] imx: move CONFIG_VIDEO_IPUV3 to defconfigs sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, 12/17] imx6: wandboard: convert to DM_GPIO and enable pinctrl driver sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,16/17] imx6: wandboard: convert to DM_I2C sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,14/17] imx6: wandboard: convert to DM_VIDEO sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,05/17] apalis_imx6: " sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,09/17] mx6sabresd: " sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,06/17] imx6: icore: " sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot,02/17] video: move ipuv3 files to subdirectory sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot,01/17] video: ipuv3: add DM_VIDEO support sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot, 04/17] imx6: dts: add 'u-boot, dm-pre-reloc' to soc and ipu nodes sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot,15/17] imx6: wandboard: convert to DM_PMIC sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot,07/17] imx6: ge_bx50v3: convert to DM_VIDEO sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, v2, 05/14] colibri-imx6ull: fix ethernet phy power on sbabic at denx.de
[not found] ` <dominik.sliwa@toradex.com>
2019-04-26 9:37 ` [U-Boot] [U-Boot, v2, 01/14] tdx-cfg-block: add support for new colibri iMX6ull skus sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, v2, 4/5] board: toradex: tdx-cfg-block: add new skus sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, v2, 3/5] board: toradex: tdx-cfg-block: clean-up sku handling sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v4, 17/22] config: bk4: Update u-boot script to support recovery via SD card sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v4, 05/22] pcm052: board: Do not enable I2C2 code in the board file sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v4, 07/22] pcm052: board: Remove "m4go" command as it is superseded by "bootaux" sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v4, 06/22] vybrid: Define the imx_get_mac_from_fuse() as a __weak function sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v4, 15/22] config: bk4: Update include/configs/bk4r1.h file sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v4, 10/22] pcm052: board: cosmetic: Add copyright notice to pcm052.c sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v4, 04/22] vybrid: clock: Provide enable_i2c_clk() function for Vybrid sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v4, 14/22] config: pcm052: Use SZ_X{MK} from linux/sizes.h for include/configs/pcm052.h sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v4, 18/22] config: bk4: Update u-boot envs to support NOR memories initial setup sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v4, 12/22] ARM: DTS: Provide vf610-bk4r1-u-boot.dtsi for U-Boot specific properties sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v4, 21/22] pcm052: mac: Provide board specific imx_get_mac_from_fuse() function sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v4, 09/22] ARM: DTS: vybrid: Update vf.dtsi file to descibe more vf610 hardware sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v4, 13/22] defconfig: bk4/pcm052: Update bk4r1|pcm052_defconfig to support DM/DT sbabic at denx.de
2019-03-13 9:30 ` [U-Boot] [U-Boot, v4, 16/22] pcm052: board: Remove in-board setup code (it is now replaced by DM setup) sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v4, 03/22] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions sbabic at denx.de
2019-03-13 9:47 ` [U-Boot] [U-Boot, v4, 20/22] pcm052: board: Add code to setup LED default states sbabic at denx.de
2019-03-13 9:47 ` [U-Boot] [U-Boot, v4, 01/22] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver sbabic at denx.de
2019-03-13 9:47 ` [U-Boot] [U-Boot, v4, 02/22] net: Kconfig: FEC: Add dependency on VF610 sbabic at denx.de
2019-03-13 9:47 ` [U-Boot] [U-Boot, v4, 08/22] pcm052: board: vybrid: Update the board name for BK4 device sbabic at denx.de
2019-03-13 9:47 ` [U-Boot] [U-Boot, v4, 22/22] pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot, v2, 08/22] ARM: dts: colibri_vf: update device trees sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v2, 21/23] apalis_imx6: use SDP if USB serial downloader has been used sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 11/22] colibri_vf: migrate fec, esdhc, nfc and usb to driver model sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 22/22] colibri_vf: fix sdboot for vybrid modules sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,v2,13/22] colibri_vf: add distroboot support sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 20/22] colibri_vf: adjust timing according to data sheet sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 12/22] config: colibri_vf: use macros from linux/sizes.h sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 10/22] colibri_vf: migrate pinctrl and regulators to dtb/dm sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 21/22] colibri_vf: use leveling evaluated by DDR validation tools sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 05/22] configs: colibri_vf: remove obsolete mmc/sd card environment sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,v2,14/22] colibri_vf: set fdtfile for distroboot sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 06/22] configs: colibri_vf: limit size of malloc() pool before relocation sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot, v2, 17/22] colibri_vf: disable undefined instruction events in user debug sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot, v2, 18/22] config: colibri_vf: enable mtd partitions via dt sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot, v2, 09/22] configs: colibri_vf: disable obscure options sbabic at denx.de
2019-04-01 9:09 ` [U-Boot] [U-Boot, v2, 16/22] colibri_vf: enable user debug by default sbabic at denx.de
2019-04-26 9:36 ` [U-Boot] [U-Boot, imx-next, v1, 01/14] ARM: Remove HSC|DDC ETH PHY reset code after switching to DM/DTS sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, imx-next, v1, 08/14] DTS: Enable USB host support (including regulators) on HSC|DDC boards sbabic at denx.de
[not found] ` <alison.wang@nxp.com>
[not found] ` <akshaybhat@timesys.com>
[not found] ` <lzenz@dh-electronics.de>
[not found] ` <eran.m@variscite.com>
2019-04-01 9:09 ` [U-Boot] [U-Boot, v2, 07/22] configs: move CONFIG_MXC_OCOTP to Kconfig sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, v2, 1/2] ARM: imx6: DHCOM i.MX6 PDK: use Kconfig for inclusion of DDR calibration sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, v2, 11/14] colibri-imx6ull: migrate fec to using driver model sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, v2, 09/14] colibri-imx6ull: migrate mmc " sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, imx-next, v1, 12/14] ARM: config: Remove not needed CONFIG_MXC_USB_PORT define sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, imx-next, v1, 10/14] USB: DM: Convert i.MX5 ehci code to driver model sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot,v1] colibri_vf: fix tab vs. spaces sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, v2, 02/14] tdx-cfg-block: simplify i.MX 6 module detection sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, imx-next, v1, 14/14] boot.src: Provide dsa_core.blacklist bootarg when booting via NFS sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, imx-next, v1, 07/14] DTS: Provide USB host DTS description for i.MX53 devices sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, imx-next, v1, 09/14] ARM: Remove EHCI specific code from HSC|DDC board file sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, imx-next, v1, 05/14] ARM: Remove non DM/DTS esdhc3 code from HSC|DDC board related files sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, imx-next, v1, 04/14] ARM: defconfig: Move CONFIG_FSL_ESDHC to Kconfig sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, v2, 06/14] board: imx6ull: Add disable PMIC_STBY_REQ sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, v2, 07/14] colibri-imx6ull: configuration clean-up sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, v2, 04/14] apalis/colibri_imx6/imx6ull: make sure loadaddr does not collide sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot, v1] colibri_vf: fix ethernet by adding explicit phy node sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot, imx-next, v1, 02/14] DTS: Add esdhc3 device tree description tuning for HSC|DDC boards sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot, v2, 03/14] colibri-imx6ull: set module variant depending on config block sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot, v2, 08/14] colibri-imx6ull: migrate pinctrl and regulators to dtb/dm sbabic at denx.de
2019-04-26 9:55 ` [U-Boot] [U-Boot, imx-next, v1, 06/14] ARM: kp_imx53: config: Do not use ${boardtype} to setup update wic file sbabic at denx.de
2019-04-26 9:55 ` [U-Boot] [U-Boot, v2, 10/14] colibri-imx6ull: migrate usb to using driver model sbabic at denx.de
2019-01-03 22:50 [U-Boot] [PATCH] ARM: imx: fix: Provide correct enum values for ONENAND/NOR boot recognition Lukasz Majewski
2019-01-03 6:54 [U-Boot] [PATCH 0/3] Migrate i.MX53 based cx9020 to CONFIG_DM_MMC=y linux-kernel-dev at beckhoff.com
2019-01-03 6:54 ` [U-Boot] [PATCH 1/3] mmc: fsl_esdhc: add compatible for fsl, imx53-esdhc linux-kernel-dev at beckhoff.com
2019-01-30 8:57 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-01-03 6:54 ` [U-Boot] [PATCH 2/3] arm: imx: Add esdhc1/2 nodes to imx53.dtsi linux-kernel-dev at beckhoff.com
2019-01-30 9:15 ` [U-Boot] [U-Boot,2/3] " sbabic at denx.de
2019-01-03 6:54 ` [U-Boot] [PATCH 3/3] dm: arm: imx: migrate cx9020 to CONFIG_DM_MMC linux-kernel-dev at beckhoff.com
2019-01-02 6:58 [U-Boot] [PATCH 1/2] tools/imx8m_image.sh: remove bashism Baruch Siach
2019-01-02 6:58 ` [U-Boot] [PATCH 2/2] imx8mq_evk/README: remove ARCH environment variable Baruch Siach
2019-01-03 13:41 ` [U-Boot] [PATCH 1/2] tools/imx8m_image.sh: remove bashism Christopher Spencer
2019-02-28 1:43 ` Fabio Estevam
2019-02-28 4:23 ` Baruch Siach
2019-04-01 13:20 ` Otavio Salvador
2019-04-01 13:46 ` Stefano Babic
2019-04-01 13:49 ` Fabio Estevam
2019-04-01 14:05 ` Stefano Babic
2019-04-01 14:14 ` Fabio Estevam
2019-04-01 15:51 ` Stefano Babic
2019-04-01 13:56 ` Otavio Salvador
2019-04-01 14:08 ` Tom Rini
2018-12-21 6:21 [U-Boot] [PATCH V2 00/10] i.MX8QXP: MEK: support SPL Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 01/10] imx8qxp: add SUPPORT_SPL option Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 02/10] imx8: scu: use dedicated MU for SPL Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 03/10] arm: imx: build mach-imx for i.MX8 Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 04/10] gpio: introduce CONFIG_SPL_DM_PCA953X Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 05/10] spl: imx8: add spl boot device Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 06/10] dts: imx8qxp-mek: introduce u-boot dtsi Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 07/10] imx: mkimage_fit_atf: introduce BL33_BASE_ADDR Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 08/10] imx: build flash.bin for i.MX8 Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 09/10] imx8qxp: mek: default enable SPL Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 10/10] imx8qxp: mek: update README Peng Fan
2018-12-11 18:40 [U-Boot] [PATCH 1/3] mx7: Do not call lcdif_power_down() in the SPL case Otavio Salvador
2018-12-11 18:40 ` [U-Boot] [PATCH 2/3] pico-imx7d: Add LCD support Otavio Salvador
2018-12-11 18:40 ` [U-Boot] [PATCH 3/3] logos: Add the TechNexion's logo Otavio Salvador
2019-02-18 22:53 ` Fabio Estevam
2019-03-20 17:39 ` Fabio Estevam
2018-12-12 1:47 ` [U-Boot] [PATCH 1/3] mx7: Do not call lcdif_power_down() in the SPL case Peng Fan
[not found] ` <otavio@ossystems.com.br>
[not found] ` <rui.silva@linaro.org>
[not found] ` <linux-imx@nxp.com>
2019-01-30 9:05 ` [U-Boot] [U-Boot, 2/2] imx8mq_evk/README: remove ARCH environment variable sbabic at denx.de
[not found] ` <20190130084020.812982D807F@tinkie.tkos.co.il>
2019-01-30 9:48 ` Baruch Siach
2019-01-30 14:33 ` Stefano Babic
2019-01-30 15:13 ` Baruch Siach
2019-01-30 15:30 ` Stefano Babic
[not found] ` <fabio.estevam@nxp.com>
[not found] ` <richard.hu@technexion.com>
[not found] ` <john.weber@technexion.com>
2019-01-30 8:57 ` [U-Boot] [U-Boot, 1/3] mx7: Do not call lcdif_power_down() in the SPL case sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot,2/3] pico-imx7d: Add LCD support sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot, 3/3] dm: arm: imx: migrate cx9020 to CONFIG_DM_MMC sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] ARM: imx: fix: Provide correct enum values for ONENAND/NOR boot recognition sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v1, 3/3] imx: cpu.c: give access to reset cause in spl sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot, v2, 2/3] ddr: vybrid: Provide code to perform on-boot calibration sbabic at denx.de
2019-02-16 10:45 ` [U-Boot] [U-Boot, v2, 1/3] ddr: vybrid: Add DDRMC calibration related registers (DQS to DQ) sbabic at denx.de
2019-02-16 10:45 ` [U-Boot] [U-Boot, v2, 3/3] ddr: vybrid: Add calibration code to memory controler's (DDRMC) setup code sbabic at denx.de
[not found] ` <marek.vasut+renesas@gmail.com>
2019-01-30 9:05 ` [U-Boot] [U-Boot,v4,2/2] imx: Add PHYTEC phyBOARD-i.MX6UL-Segin sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v4, 11/22] ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052) sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, v3] ARM: dts: i.MX6Q: fix avoid_unnecessary_addr_size warnings sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, v2, 1/5] misc: imx8: remove duplicates from scfw api sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot, v2, 2/5] arm: dts: imx8dx: add lpuart1, lpuart2, lpuart3 sbabic at denx.de
2019-06-10 9:19 ` [U-Boot] [PATCH] ARM: imx: apalis_imx6: Drop ad-hoc SATA binding <mailto:u-boot-request@lists.denx.de?subject=unsubscribe> <mailto:u-boot-request@lists.denx.de?subject=subscribe> sbabic at denx.de
[not found] ` <michal.simek@xilinx.com>
[not found] ` <maxime.ripard@bootlin.com>
[not found] ` <jason.hui.liu@nxp.com>
[not found] ` <breno.lima@nxp.com>
2019-01-30 9:05 ` [U-Boot] imx: hab: Convert non-NULL IVT DCD pointer warning to an error sbabic at denx.de
[not found] ` <albert.aribaud@3adev.fr>
[not found] ` <sr@denx.de>
2019-04-01 8:52 ` [U-Boot] [U-Boot, 08/10] ata: dwc_ahsata: Add ahci driver model support sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 04/22] configs: move CONFIG_USB_EHCI_VF to Kconfig sbabic at denx.de
2018-12-11 11:34 [U-Boot] [PATCH v4 1/2] Enable FEC driver to retrieve PHY address from device tree Martyn Welch
2018-12-11 11:34 ` [U-Boot] [PATCH v4 2/2] imx: Add PHYTEC phyBOARD-i.MX6UL-Segin Martyn Welch
2019-01-18 20:01 ` Martyn Welch
[not found] ` <joe.hershberger@ni.com>
2019-01-30 9:15 ` [U-Boot] [U-Boot, v4, 1/2] Enable FEC driver to retrieve PHY address from device tree sbabic at denx.de
2018-12-07 22:31 [U-Boot] [PATCH] imx: hab: Convert non-NULL IVT DCD pointer warning to an error Breno Matheus Lima
2019-01-16 12:00 ` Fabio Estevam
2018-12-05 16:04 [U-Boot] [PATCH v2 0/3] ddr: vybrid: Support for vf610 built-in DDR3 memory calibration Lukasz Majewski
2018-12-05 16:04 ` [U-Boot] [PATCH v2 1/3] ddr: vybrid: Add DDRMC calibration related registers (DQS to DQ) Lukasz Majewski
2018-12-05 16:04 ` [U-Boot] [PATCH v2 2/3] ddr: vybrid: Provide code to perform on-boot calibration Lukasz Majewski
2018-12-05 16:04 ` [U-Boot] [PATCH v2 3/3] ddr: vybrid: Add calibration code to memory controler's (DDRMC) setup code Lukasz Majewski
2019-01-02 11:28 ` [U-Boot] [PATCH v2 0/3] ddr: vybrid: Support for vf610 built-in DDR3 memory calibration Lukasz Majewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190204151541.ntboob335c4rlsrp@fsr-ub1664-175 \
--to=abel.vesa@nxp.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.