From: Peng Fan <peng.fan@nxp.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH RESEND 03/10] dt-bindings: clock: dt-bindings: pinctrl: add i.MX8QM clocks definition
Date: Tue, 5 Mar 2019 02:32:21 +0000 [thread overview]
Message-ID: <20190305024401.2665-3-peng.fan@nxp.com> (raw)
In-Reply-To: <20190305024401.2665-1-peng.fan@nxp.com>
Add i.MX8QM clocks definition
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
include/dt-bindings/clock/imx8qm-clock.h | 846 +++++++++++++++++++++++++++++++
1 file changed, 846 insertions(+)
create mode 100644 include/dt-bindings/clock/imx8qm-clock.h
diff --git a/include/dt-bindings/clock/imx8qm-clock.h b/include/dt-bindings/clock/imx8qm-clock.h
new file mode 100644
index 0000000000..58de976e63
--- /dev/null
+++ b/include/dt-bindings/clock/imx8qm-clock.h
@@ -0,0 +1,846 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2018 NXP
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_IMX8QM_H
+#define __DT_BINDINGS_CLOCK_IMX8QM_H
+
+#define IMX8QM_CLK_DUMMY 0
+
+#define IMX8QM_A53_DIV 1
+#define IMX8QM_A53_CLK 2
+#define IMX8QM_A72_DIV 3
+#define IMX8QM_A72_CLK 4
+
+/* SC Clocks. */
+#define IMX8QM_SC_I2C_DIV 5
+#define IMX8QM_SC_I2C_CLK 6
+#define IMX8QM_SC_PID0_DIV 7
+#define IMX8QM_SC_PID0_CLK 8
+#define IMX8QM_SC_PIT_DIV 9
+#define IMX8QM_SC_PIT_CLK 10
+#define IMX8QM_SC_TPM_DIV 11
+#define IMX8QM_SC_TPM_CLK 12
+#define IMX8QM_SC_UART_DIV 13
+#define IMX8QM_SC_UART_CLK 14
+
+/* LSIO */
+#define IMX8QM_PWM0_DIV 15
+#define IMX8QM_PWM0_CLK 16
+#define IMX8QM_PWM1_DIV 17
+#define IMX8QM_PWM1_CLK 18
+#define IMX8QM_PWM2_DIV 19
+#define IMX8QM_PWM2_CLK 20
+#define IMX8QM_PWM3_DIV 21
+#define IMX8QM_PWM3_CLK 22
+#define IMX8QM_PWM4_DIV 23
+#define IMX8QM_PWM4_CLK 24
+#define IMX8QM_PWM5_DIV 26
+#define IMX8QM_PWM5_CLK 27
+#define IMX8QM_PWM6_DIV 28
+#define IMX8QM_PWM6_CLK 29
+#define IMX8QM_PWM7_DIV 30
+#define IMX8QM_PWM7_CLK 31
+#define IMX8QM_FSPI0_DIV 32
+#define IMX8QM_FSPI0_CLK 33
+#define IMX8QM_FSPI1_DIV 34
+#define IMX8QM_FSPI1_CLK 35
+#define IMX8QM_GPT0_DIV 36
+#define IMX8QM_GPT0_CLK 37
+#define IMX8QM_GPT1_DIV 38
+#define IMX8QM_GPT1_CLK 39
+#define IMX8QM_GPT2_DIV 40
+#define IMX8QM_GPT2_CLK 41
+#define IMX8QM_GPT3_DIV 42
+#define IMX8QM_GPT3_CLK 43
+#define IMX8QM_GPT4_DIV 44
+#define IMX8QM_GPT4_CLK 45
+
+/* Connectivity */
+#define IMX8QM_APBHDMA_CLK 46
+#define IMX8QM_GPMI_APB_CLK 47
+#define IMX8QM_GPMI_APB_BCH_CLK 48
+#define IMX8QM_GPMI_BCH_IO_DIV 49
+#define IMX8QM_GPMI_BCH_IO_CLK 50
+#define IMX8QM_GPMI_BCH_DIV 51
+#define IMX8QM_GPMI_BCH_CLK 52
+#define IMX8QM_SDHC0_IPG_CLK 53
+#define IMX8QM_SDHC0_DIV 54
+#define IMX8QM_SDHC0_CLK 55
+#define IMX8QM_SDHC1_IPG_CLK 56
+#define IMX8QM_SDHC1_DIV 57
+#define IMX8QM_SDHC1_CLK 58
+#define IMX8QM_SDHC2_IPG_CLK 59
+#define IMX8QM_SDHC2_DIV 60
+#define IMX8QM_SDHC2_CLK 61
+#define IMX8QM_USB2_OH_AHB_CLK 62
+#define IMX8QM_USB2_OH_IPG_S_CLK 63
+#define IMX8QM_USB2_OH_IPG_S_PL301_CLK 64
+#define IMX8QM_USB2_PHY_IPG_CLK 65
+#define IMX8QM_USB3_IPG_CLK 66
+#define IMX8QM_USB3_CORE_PCLK 67
+#define IMX8QM_USB3_PHY_CLK 68
+#define IMX8QM_USB3_ACLK_DIV 69
+#define IMX8QM_USB3_ACLK 70
+#define IMX8QM_USB3_BUS_DIV 71
+#define IMX8QM_USB3_BUS_CLK 72
+#define IMX8QM_USB3_LPM_DIV 73
+#define IMX8QM_USB3_LPM_CLK 74
+#define IMX8QM_ENET0_AHB_CLK 75
+#define IMX8QM_ENET0_IPG_S_CLK 76
+#define IMX8QM_ENET0_IPG_CLK 77
+#define IMX8QM_ENET0_RGMII_DIV 78
+#define IMX8QM_ENET0_RGMII_TX_CLK 79
+#define IMX8QM_ENET0_ROOT_DIV 80
+#define IMX8QM_ENET0_TX_CLK 81
+#define IMX8QM_ENET0_ROOT_CLK 82
+#define IMX8QM_ENET0_PTP_CLK 83
+#define IMX8QM_ENET0_BYPASS_DIV 84
+#define IMX8QM_ENET1_AHB_CLK 85
+#define IMX8QM_ENET1_IPG_S_CLK 86
+#define IMX8QM_ENET1_IPG_CLK 87
+#define IMX8QM_ENET1_RGMII_DIV 88
+#define IMX8QM_ENET1_RGMII_TX_CLK 89
+#define IMX8QM_ENET1_ROOT_DIV 90
+#define IMX8QM_ENET1_TX_CLK 91
+#define IMX8QM_ENET1_ROOT_CLK 92
+#define IMX8QM_ENET1_PTP_CLK 93
+#define IMX8QM_ENET1_BYPASS_DIV 94
+#define IMX8QM_MLB_CLK 95
+#define IMX8QM_MLB_HCLK 96
+#define IMX8QM_MLB_IPG_CLK 97
+#define IMX8QM_EDMA_CLK 98
+#define IMX8QM_EDMA_IPG_CLK 99
+
+/* DMA */
+#define IMX8QM_SPI0_IPG_CLK 100
+#define IMX8QM_SPI0_DIV 101
+#define IMX8QM_SPI0_CLK 102
+#define IMX8QM_SPI1_IPG_CLK 103
+#define IMX8QM_SPI1_DIV 104
+#define IMX8QM_SPI1_CLK 105
+#define IMX8QM_SPI2_IPG_CLK 106
+#define IMX8QM_SPI2_DIV 107
+#define IMX8QM_SPI2_CLK 108
+#define IMX8QM_SPI3_IPG_CLK 109
+#define IMX8QM_SPI3_DIV 110
+#define IMX8QM_SPI3_CLK 111
+#define IMX8QM_UART0_IPG_CLK 112
+#define IMX8QM_UART0_DIV 113
+#define IMX8QM_UART0_CLK 114
+#define IMX8QM_UART1_IPG_CLK 115
+#define IMX8QM_UART1_DIV 116
+#define IMX8QM_UART1_CLK 117
+#define IMX8QM_UART2_IPG_CLK 118
+#define IMX8QM_UART2_DIV 119
+#define IMX8QM_UART2_CLK 120
+#define IMX8QM_UART3_IPG_CLK 121
+#define IMX8QM_UART3_DIV 122
+#define IMX8QM_UART3_CLK 123
+#define IMX8QM_UART4_IPG_CLK 124
+#define IMX8QM_UART4_DIV 125
+#define IMX8QM_EMVSIM0_IPG_CLK 126
+#define IMX8QM_UART4_CLK 127
+#define IMX8QM_EMVSIM0_DIV 128
+#define IMX8QM_EMVSIM0_CLK 129
+#define IMX8QM_EMVSIM1_IPG_CLK 130
+#define IMX8QM_EMVSIM1_DIV 131
+#define IMX8QM_EMVSIM1_CLK 132
+#define IMX8QM_CAN0_IPG_CHI_CLK 133
+#define IMX8QM_CAN0_IPG_CLK 134
+#define IMX8QM_CAN0_DIV 135
+#define IMX8QM_CAN0_CLK 136
+#define IMX8QM_CAN1_IPG_CHI_CLK 137
+#define IMX8QM_CAN1_IPG_CLK 138
+#define IMX8QM_CAN1_DIV 139
+#define IMX8QM_CAN1_CLK 140
+#define IMX8QM_CAN2_IPG_CHI_CLK 141
+#define IMX8QM_CAN2_IPG_CLK 142
+#define IMX8QM_CAN2_DIV 143
+#define IMX8QM_CAN2_CLK 144
+#define IMX8QM_I2C0_IPG_CLK 145
+#define IMX8QM_I2C0_DIV 146
+#define IMX8QM_I2C0_CLK 147
+#define IMX8QM_I2C1_IPG_CLK 148
+#define IMX8QM_I2C1_DIV 149
+#define IMX8QM_I2C1_CLK 150
+#define IMX8QM_I2C2_IPG_CLK 151
+#define IMX8QM_I2C2_DIV 152
+#define IMX8QM_I2C2_CLK 153
+#define IMX8QM_I2C3_IPG_CLK 154
+#define IMX8QM_I2C3_DIV 155
+#define IMX8QM_I2C3_CLK 156
+#define IMX8QM_I2C4_IPG_CLK 157
+#define IMX8QM_I2C4_DIV 158
+#define IMX8QM_I2C4_CLK 159
+#define IMX8QM_FTM0_IPG_CLK 160
+#define IMX8QM_FTM0_DIV 161
+#define IMX8QM_FTM0_CLK 162
+#define IMX8QM_FTM1_IPG_CLK 163
+#define IMX8QM_FTM1_DIV 164
+#define IMX8QM_FTM1_CLK 165
+#define IMX8QM_ADC0_IPG_CLK 166
+#define IMX8QM_ADC0_DIV 167
+#define IMX8QM_ADC0_CLK 168
+#define IMX8QM_ADC1_IPG_CLK 169
+#define IMX8QM_ADC1_DIV 170
+#define IMX8QM_ADC1_CLK 171
+
+/* Audio */
+#define IMX8QM_AUD_PLL0_DIV 172
+#define IMX8QM_AUD_PLL0 173
+#define IMX8QM_AUD_PLL1_DIV 174
+#define IMX8QM_AUD_PLL1 175
+#define IMX8QM_AUD_AMIX_IPG 182
+#define IMX8QM_AUD_ESAI_0_IPG 183
+#define IMX8QM_AUD_ESAI_1_IPG 184
+#define IMX8QM_AUD_ESAI_0_EXTAL_IPG 185
+#define IMX8QM_AUD_ESAI_1_EXTAL_IPG 186
+#define IMX8QM_AUD_SAI_0_IPG 187
+#define IMX8QM_AUD_SAI_0_IPG_S 188
+#define IMX8QM_AUD_SAI_0_MCLK 189
+#define IMX8QM_AUD_SAI_1_IPG 190
+#define IMX8QM_AUD_SAI_1_IPG_S 191
+#define IMX8QM_AUD_SAI_1_MCLK 192
+#define IMX8QM_AUD_SAI_2_IPG 193
+#define IMX8QM_AUD_SAI_2_IPG_S 194
+#define IMX8QM_AUD_SAI_2_MCLK 195
+#define IMX8QM_AUD_SAI_3_IPG 196
+#define IMX8QM_AUD_SAI_3_IPG_S 197
+#define IMX8QM_AUD_SAI_3_MCLK 198
+#define IMX8QM_AUD_SAI_6_IPG 199
+#define IMX8QM_AUD_SAI_6_IPG_S 200
+#define IMX8QM_AUD_SAI_6_MCLK 201
+#define IMX8QM_AUD_SAI_7_IPG 202
+#define IMX8QM_AUD_SAI_7_IPG_S 203
+#define IMX8QM_AUD_SAI_7_MCLK 204
+#define IMX8QM_AUD_SAI_HDMIRX0_IPG 205
+#define IMX8QM_AUD_SAI_HDMIRX0_IPG_S 206
+#define IMX8QM_AUD_SAI_HDMIRX0_MCLK 207
+#define IMX8QM_AUD_SAI_HDMITX0_IPG 208
+#define IMX8QM_AUD_SAI_HDMITX0_IPG_S 209
+#define IMX8QM_AUD_SAI_HDMITX0_MCLK 210
+#define IMX8QM_AUD_MQS_IPG 211
+#define IMX8QM_AUD_MQS_HMCLK 212
+#define IMX8QM_AUD_GPT5_IPG_S 213
+#define IMX8QM_AUD_GPT5_CLKIN 214
+#define IMX8QM_AUD_GPT5_24M_CLK 215
+#define IMX8QM_AUD_GPT6_IPG_S 216
+#define IMX8QM_AUD_GPT6_CLKIN 217
+#define IMX8QM_AUD_GPT6_24M_CLK 218
+#define IMX8QM_AUD_GPT7_IPG_S 219
+#define IMX8QM_AUD_GPT7_CLKIN 220
+#define IMX8QM_AUD_GPT7_24M_CLK 221
+#define IMX8QM_AUD_GPT8_IPG_S 222
+#define IMX8QM_AUD_GPT8_CLKIN 223
+#define IMX8QM_AUD_GPT8_24M_CLK 224
+#define IMX8QM_AUD_GPT9_IPG_S 225
+#define IMX8QM_AUD_GPT9_CLKIN 226
+#define IMX8QM_AUD_GPT9_24M_CLK 227
+#define IMX8QM_AUD_GPT10_IPG_S 228
+#define IMX8QM_AUD_GPT10_CLKIN 229
+#define IMX8QM_AUD_GPT10_24M_CLK 230
+#define IMX8QM_AUD_ACM_AUD_PLL_CLK0_DIV 232
+#define IMX8QM_AUD_ACM_AUD_PLL_CLK0_CLK 233
+#define IMX8QM_AUD_ACM_AUD_PLL_CLK1_DIV 234
+#define IMX8QM_AUD_ACM_AUD_PLL_CLK1_CLK 235
+#define IMX8QM_AUD_ACM_AUD_REC_CLK0_DIV 236
+#define IMX8QM_AUD_ACM_AUD_REC_CLK0_CLK 237
+#define IMX8QM_AUD_ACM_AUD_REC_CLK1_DIV 238
+#define IMX8QM_AUD_ACM_AUD_REC_CLK1_CLK 239
+#define IMX8QM_AUD_MCLKOUT0 240
+#define IMX8QM_AUD_MCLKOUT1 241
+#define IMX8QM_AUD_SPDIF_0_TX_CLK 242
+#define IMX8QM_AUD_SPDIF_0_GCLKW 243
+#define IMX8QM_AUD_SPDIF_0_IPG_S 244
+#define IMX8QM_AUD_SPDIF_1_TX_CLK 245
+#define IMX8QM_AUD_SPDIF_1_GCLKW 246
+#define IMX8QM_AUD_SPDIF_1_IPG_S 247
+#define IMX8QM_AUD_ASRC_0_IPG 248
+#define IMX8QM_AUD_ASRC_0_MEM 249
+#define IMX8QM_AUD_ASRC_1_IPG 250
+#define IMX8QM_AUD_ASRC_1_MEM 251
+
+/* VPU */
+#define IMX8QM_VPU_CORE_DIV 252
+#define IMX8QM_VPU_CORE_CLK 253
+#define IMX8QM_VPU_UART_DIV 254
+#define IMX8QM_VPU_UART_CLK 255
+#define IMX8QM_VPU_DDR_DIV 256
+#define IMX8QM_VPU_DDR_CLK 257
+#define IMX8QM_VPU_SYS_DIV 258
+#define IMX8QM_VPU_SYS_CLK 259
+#define IMX8QM_VPU_XUVI_DIV 260
+#define IMX8QM_VPU_XUVI_CLK 261
+
+/* GPU Clocks. */
+#define IMX8QM_GPU0_CORE_DIV 262
+#define IMX8QM_GPU0_CORE_CLK 263
+#define IMX8QM_GPU0_SHADER_DIV 264
+#define IMX8QM_GPU0_SHADER_CLK 265
+#define IMX8QM_GPU1_CORE_DIV 266
+#define IMX8QM_GPU1_CORE_CLK 267
+#define IMX8QM_GPU1_SHADER_DIV 268
+#define IMX8QM_GPU1_SHADER_CLK 269
+
+/* MIPI CSI */
+#define IMX8QM_CSI0_IPG_CLK_S 270
+#define IMX8QM_CSI0_LIS_IPG_CLK 271
+#define IMX8QM_CSI0_APB_CLK 272
+#define IMX8QM_CSI0_I2C0_DIV 273
+#define IMX8QM_CSI0_I2C0_CLK 274
+#define IMX8QM_CSI0_PWM0_DIV 275
+#define IMX8QM_CSI0_PWM0_CLK 276
+#define IMX8QM_CSI0_CORE_DIV 277
+#define IMX8QM_CSI0_CORE_CLK 278
+#define IMX8QM_CSI0_ESC_DIV 279
+#define IMX8QM_CSI0_ESC_CLK 280
+#define IMX8QM_CSI1_IPG_CLK_S 281
+#define IMX8QM_CSI1_LIS_IPG_CLK 282
+#define IMX8QM_CSI1_APB_CLK 283
+#define IMX8QM_CSI1_I2C0_DIV 284
+#define IMX8QM_CSI1_I2C0_CLK 285
+#define IMX8QM_CSI1_PWM0_DIV 286
+#define IMX8QM_CSI1_PWM0_CLK 287
+#define IMX8QM_CSI1_CORE_DIV 288
+#define IMX8QM_CSI1_CORE_CLK 289
+#define IMX8QM_CSI1_ESC_DIV 290
+#define IMX8QM_CSI1_ESC_CLK 291
+
+/* Display */
+#define IMX8QM_DC0_PLL0_DIV 292
+#define IMX8QM_DC0_PLL0_CLK 293
+#define IMX8QM_DC0_PLL1_DIV 294
+#define IMX8QM_DC0_PLL1_CLK 295
+#define IMX8QM_DC0_DISP0_DIV 296
+#define IMX8QM_DC0_DISP0_CLK 297
+#define IMX8QM_DC0_DISP1_DIV 298
+#define IMX8QM_DC0_DISP1_CLK 299
+#define IMX8QM_DC0_BYPASS_0_DIV 300
+#define IMX8QM_DC0_BYPASS_1_DIV 301
+#define IMX8QM_DC0_IRIS_AXI_CLK 302
+#define IMX8AM_DC0_IRIS_MVPL_CLK 303
+#define IMX8QM_DC0_DISP0_MSI_CLK 304
+#define IMX8QM_DC0_LIS_IPG_CLK 305
+#define IMX8QM_DC0_PXL_CMB_APB_CLK 306
+#define IMX8QM_DC0_PRG0_RTRAM_CLK 307
+#define IMX8QM_DC0_PRG1_RTRAM_CLK 308
+#define IMX8QM_DC0_PRG2_RTRAM_CLK 309
+#define IMX8QM_DC0_PRG3_RTRAM_CLK 310
+#define IMX8QM_DC0_PRG4_RTRAM_CLK 311
+#define IMX8QM_DC0_PRG5_RTRAM_CLK 312
+#define IMX8QM_DC0_PRG6_RTRAM_CLK 313
+#define IMX8QM_DC0_PRG7_RTRAM_CLK 314
+#define IMX8QM_DC0_PRG8_RTRAM_CLK 315
+#define IMX8QM_DC0_PRG0_APB_CLK 316
+#define IMX8QM_DC0_PRG1_APB_CLK 317
+#define IMX8QM_DC0_PRG2_APB_CLK 318
+#define IMX8QM_DC0_PRG3_APB_CLK 319
+#define IMX8QM_DC0_PRG4_APB_CLK 320
+#define IMX8QM_DC0_PRG5_APB_CLK 321
+#define IMX8QM_DC0_PRG6_APB_CLK 322
+#define IMX8QM_DC0_PRG7_APB_CLK 323
+#define IMX8QM_DC0_PRG8_APB_CLK 324
+#define IMX8QM_DC0_DPR0_APB_CLK 325
+#define IMX8QM_DC0_DPR1_APB_CLK 326
+#define IMX8QM_DC0_RTRAM0_CLK 327
+#define IMX8QM_DC0_RTRAM1_CLK 328
+#define IMX8QM_DC1_PLL0_DIV 329
+#define IMX8QM_DC1_PLL0_CLK 330
+#define IMX8QM_DC1_PLL1_DIV 331
+#define IMX8QM_DC1_PLL1_CLK 332
+#define IMX8QM_DC1_DISP0_DIV 333
+#define IMX8QM_DC1_DISP0_CLK 334
+#define IMX8QM_DC1_BYPASS_0_DIV 335
+#define IMX8QM_DC1_BYPASS_1_DIV 336
+#define IMX8QM_DC1_DISP1_DIV 337
+#define IMX8QM_DC1_DISP1_CLK 338
+#define IMX8QM_DC1_IRIS_AXI_CLK 339
+#define IMX8AM_DC1_IRIS_MVPL_CLK 340
+#define IMX8QM_DC1_DISP0_MSI_CLK 341
+#define IMX8QM_DC1_LIS_IPG_CLK 342
+#define IMX8QM_DC1_PXL_CMB_APB_CLK 343
+#define IMX8QM_DC1_PRG0_RTRAM_CLK 344
+#define IMX8QM_DC1_PRG1_RTRAM_CLK 345
+#define IMX8QM_DC1_PRG2_RTRAM_CLK 346
+#define IMX8QM_DC1_PRG3_RTRAM_CLK 347
+#define IMX8QM_DC1_PRG4_RTRAM_CLK 348
+#define IMX8QM_DC1_PRG5_RTRAM_CLK 349
+#define IMX8QM_DC1_PRG6_RTRAM_CLK 350
+#define IMX8QM_DC1_PRG7_RTRAM_CLK 351
+#define IMX8QM_DC1_PRG8_RTRAM_CLK 352
+#define IMX8QM_DC1_PRG0_APB_CLK 353
+#define IMX8QM_DC1_PRG1_APB_CLK 354
+#define IMX8QM_DC1_PRG2_APB_CLK 355
+#define IMX8QM_DC1_PRG3_APB_CLK 356
+#define IMX8QM_DC1_PRG4_APB_CLK 357
+#define IMX8QM_DC1_PRG5_APB_CLK 358
+#define IMX8QM_DC1_PRG6_APB_CLK 359
+#define IMX8QM_DC1_PRG7_APB_CLK 360
+#define IMX8QM_DC1_PRG8_APB_CLK 361
+#define IMX8QM_DC1_DPR0_APB_CLK 362
+#define IMX8QM_DC1_DPR1_APB_CLK 363
+#define IMX8QM_DC1_RTRAM0_CLK 364
+#define IMX8QM_DC1_RTRAM1_CLK 365
+
+/* DRC */
+#define IMX8QM_DRC0_PLL0_DIV 366
+#define IMX8QM_DRC0_PLL0_CLK 367
+#define IMX8QM_DRC0_DIV 368
+#define IMX8QM_DRC0_CLK 369
+#define IMX8QM_DRC1_PLL0_DIV 370
+#define IMX8QM_DRC1_PLL0_CLK 371
+#define IMX8QM_DRC1_DIV 372
+#define IMX8QM_DRC1_CLK 373
+
+/* HDMI */
+#define IMX8QM_HDMI_AV_PLL_DIV 374
+#define IMX8QM_HDMI_AV_PLL_CLK 375
+#define IMX8QM_HDMI_I2S_BYPASS_CLK 376
+#define IMX8QM_HDMI_I2C0_DIV 377
+#define IMX8QM_HDMI_I2C0_CLK 378
+#define IMX8QM_HDMI_PXL_DIV 379
+#define IMX8QM_HDMI_PXL_CLK 380
+#define IMX8QM_HDMI_PXL_LINK_DIV 381
+#define IMX8QM_HDMI_PXL_LINK_CLK 382
+#define IMX8QM_HDMI_PXL_MUX_DIV 383
+#define IMX8QM_HDMI_PXL_MUX_CLK 384
+#define IMX8QM_HDMI_I2S_DIV 385
+#define IMX8QM_HDMI_I2S_CLK 386
+#define IMX8QM_HDMI_HDP_CORE_DIV 387
+#define IMX8QM_HDMI_HDP_CORE_CLK 388
+#define IMX8QM_HDMI_I2C_IPG_S_CLK 389
+#define IMX8QM_HDMI_I2C_IPG_CLK 390
+#define IMX8QM_HDMI_PWM_IPG_S_CLK 391
+#define IMX8QM_HDMI_PWM_IPG_CLK 392
+#define IMX8QM_HDMI_PWM_32K_CLK 393
+#define IMX8QM_HDMI_GPIO_IPG_CLK 394
+#define IMX8QM_HDMI_PXL_LINK_SLV_ODD_CLK 395
+#define IMX8QM_HDMI_PXL_LINK_SLV_EVEN_CLK 396
+#define IMX8QM_HDMI_LIS_IPG_CLK 397
+#define IMX8QM_HDMI_MSI_HCLK 398
+#define IMX8QM_HDMI_PXL_EVEN_CLK 399
+#define IMX8QM_HDMI_HDP_CLK 400
+#define IMX8QM_HDMI_PXL_DBL_CLK 401
+#define IMX8QM_HDMI_APB_CLK 402
+#define IMX8QM_HDMI_PXL_LPCG_CLK 403
+#define IMX8QM_HDMI_HDP_PHY_CLK 404
+#define IMX8QM_HDMI_IPG_DIV 405
+#define IMX8QM_HDMI_VIF_CLK 406
+#define IMX8QM_HDMI_DIG_PLL_DIV 407
+#define IMX8QM_HDMI_DIG_PLL_CLK 408
+#define IMX8QM_HDMI_APB_MUX_CSR_CLK 409
+#define IMX8QM_HDMI_APB_MUX_CTRL_CLK 410
+
+/* RX-HDMI */
+#define IMX8QM_HDMI_RX_I2S_BYPASS_CLK 411
+#define IMX8QM_HDMI_RX_BYPASS_CLK 412
+#define IMX8QM_HDMI_RX_SPDIF_BYPASS_CLK 413
+#define IMX8QM_HDMI_RX_I2C0_DIV 414
+#define IMX8QM_HDMI_RX_I2C0_CLK 415
+#define IMX8QM_HDMI_RX_SPDIF_DIV 416
+#define IMX8QM_HDMI_RX_SPDIF_CLK 417
+#define IMX8QM_HDMI_RX_HD_REF_DIV 418
+#define IMX8QM_HDMI_RX_HD_REF_CLK 419
+#define IMX8QM_HDMI_RX_HD_CORE_DIV 420
+#define IMX8QM_HDMI_RX_HD_CORE_CLK 421
+#define IMX8QM_HDMI_RX_PXL_DIV 422
+#define IMX8QM_HDMI_RX_PXL_CLK 423
+#define IMX8QM_HDMI_RX_I2S_DIV 424
+#define IMX8QM_HDMI_RX_I2S_CLK 425
+#define IMX8QM_HDMI_RX_PWM_DIV 426
+#define IMX8QM_HDMI_RX_PWM_CLK 427
+
+/* LVDS */
+#define IMX8QM_LVDS0_BYPASS_CLK 428
+#define IMX8QM_LVDS0_PIXEL_DIV 429
+#define IMX8QM_LVDS0_PIXEL_CLK 430
+#define IMX8QM_LVDS0_PHY_DIV 431
+#define IMX8QM_LVDS0_PHY_CLK 432
+#define IMX8QM_LVDS0_I2C0_IPG_CLK 433
+#define IMX8QM_LVDS0_I2C0_DIV 434
+#define IMX8QM_LVDS0_I2C0_CLK 435
+#define IMX8QM_LVDS0_I2C1_IPG_CLK 436
+#define IMX8QM_LVDS0_I2C1_DIV 437
+#define IMX8QM_LVDS0_I2C1_CLK 438
+#define IMX8QM_LVDS0_PWM0_IPG_CLK 439
+#define IMX8QM_LVDS0_PWM0_DIV 440
+#define IMX8QM_LVDS0_PWM0_CLK 441
+#define IMX8QM_LVDS0_GPIO_IPG_CLK 444
+#define IMX8QM_LVDS1_BYPASS_DIV 445
+#define IMX8QM_LVDS1_BYPASS_CLK 446
+#define IMX8QM_LVDS1_PIXEL_DIV 447
+#define IMX8QM_LVDS1_PIXEL_CLK 448
+#define IMX8QM_LVDS1_PHY_DIV 449
+#define IMX8QM_LVDS1_PHY_CLK 450
+#define IMX8QM_LVDS1_I2C0_IPG_CLK 451
+#define IMX8QM_LVDS1_I2C0_DIV 452
+#define IMX8QM_LVDS1_I2C0_CLK 453
+#define IMX8QM_LVDS1_I2C1_IPG_CLK 454
+#define IMX8QM_LVDS1_I2C1_DIV 455
+#define IMX8QM_LVDS1_I2C1_CLK 456
+#define IMX8QM_LVDS1_PWM0_IPG_CLK 457
+#define IMX8QM_LVDS1_PWM0_DIV 458
+#define IMX8QM_LVDS1_PWM0_CLK 459
+#define IMX8QM_LVDS1_GPIO_IPG_CLK 462
+
+/* MIPI */
+#define IMX8QM_MIPI0_BYPASS_CLK 465
+#define IMX8QM_MIPI0_I2C0_DIV 466
+#define IMX8QM_MIPI0_I2C0_CLK 467
+#define IMX8QM_MIPI0_I2C1_DIV 468
+#define IMX8QM_MIPI0_I2C1_CLK 469
+#define IMX8QM_MIPI0_PWM0_DIV 470
+#define IMX8QM_MIPI0_PWM0_CLK 471
+#define IMX8QM_MIPI0_DSI_TX_ESC_DIV 472
+#define IMX8QM_MIPI0_DSI_TX_ESC_CLK 473
+#define IMX8QM_MIPI0_DSI_RX_ESC_DIV 474
+#define IMX8QM_MIPI0_DSI_RX_ESC_CLK 475
+#define IMX8QM_MIPI0_PXL_DIV 476
+#define IMX8QM_MIPI0_PXL_CLK 477
+#define IMX8QM_MIPI1_BYPASS_CLK 479
+#define IMX8QM_MIPI1_I2C0_DIV 480
+#define IMX8QM_MIPI1_I2C0_CLK 481
+#define IMX8QM_MIPI1_I2C1_DIV 482
+#define IMX8QM_MIPI1_I2C1_CLK 483
+#define IMX8QM_MIPI1_PWM0_DIV 484
+#define IMX8QM_MIPI1_PWM0_CLK 485
+#define IMX8QM_MIPI1_DSI_TX_ESC_DIV 486
+#define IMX8QM_MIPI1_DSI_TX_ESC_CLK 487
+#define IMX8QM_MIPI1_DSI_RX_ESC_DIV 488
+#define IMX8QM_MIPI1_DSI_RX_ESC_CLK 489
+#define IMX8QM_MIPI1_PXL_DIV 490
+#define IMX8QM_MIPI1_PXL_CLK 491
+
+/* Imaging */
+#define IMX8QM_IMG_JPEG_ENC_IPG_CLK 492
+#define IMX8QM_IMG_JPEG_ENC_CLK 493
+#define IMX8QM_IMG_JPEG_DEC_IPG_CLK 494
+#define IMX8QM_IMG_JPEG_DEC_CLK 495
+#define IMX8QM_IMG_PXL_LINK_DC0_CLK 496
+#define IMX8QM_IMG_PXL_LINK_DC1_CLK 497
+#define IMX8QM_IMG_PXL_LINK_CSI0_CLK 498
+#define IMX8QM_IMG_PXL_LINK_CSI1_CLK 499
+#define IMX8QM_IMG_PXL_LINK_HDMI_IN_CLK 500
+#define IMX8QM_IMG_PDMA_0_CLK 501
+#define IMX8QM_IMG_PDMA_1_CLK 502
+#define IMX8QM_IMG_PDMA_2_CLK 503
+#define IMX8QM_IMG_PDMA_3_CLK 504
+#define IMX8QM_IMG_PDMA_4_CLK 505
+#define IMX8QM_IMG_PDMA_5_CLK 506
+#define IMX8QM_IMG_PDMA_6_CLK 507
+#define IMX8QM_IMG_PDMA_7_CLK 508
+
+/* HSIO */
+#define IMX8QM_HSIO_PCIE_A_MSTR_AXI_CLK 509
+#define IMX8QM_HSIO_PCIE_A_SLV_AXI_CLK 510
+#define IMX8QM_HSIO_PCIE_A_DBI_AXI_CLK 511
+#define IMX8QM_HSIO_PCIE_B_MSTR_AXI_CLK 512
+#define IMX8QM_HSIO_PCIE_B_SLV_AXI_CLK 513
+#define IMX8QM_HSIO_PCIE_B_DBI_AXI_CLK 514
+#define IMX8QM_HSIO_PCIE_X1_PER_CLK 515
+#define IMX8QM_HSIO_PCIE_X2_PER_CLK 516
+#define IMX8QM_HSIO_SATA_PER_CLK 517
+#define IMX8QM_HSIO_PHY_X1_PER_CLK 518
+#define IMX8QM_HSIO_PHY_X2_PER_CLK 519
+#define IMX8QM_HSIO_MISC_PER_CLK 520
+#define IMX8QM_HSIO_PHY_X1_APB_CLK 521
+#define IMX8QM_HSIO_PHY_X2_APB_0_CLK 522
+#define IMX8QM_HSIO_PHY_X2_APB_1_CLK 523
+#define IMX8QM_HSIO_SATA_CLK 524
+#define IMX8QM_HSIO_GPIO_CLK 525
+#define IMX8QM_HSIO_PHY_X1_PCLK 526
+#define IMX8QM_HSIO_PHY_X2_PCLK_0 527
+#define IMX8QM_HSIO_PHY_X2_PCLK_1 528
+#define IMX8QM_HSIO_SATA_EPCS_RX_CLK 529
+#define IMX8QM_HSIO_SATA_EPCS_TX_CLK 530
+
+/* M4 */
+#define IMX8QM_M4_0_CORE_DIV 531
+#define IMX8QM_M4_0_CORE_CLK 532
+#define IMX8QM_M4_0_I2C_DIV 533
+#define IMX8QM_M4_0_I2C_CLK 534
+#define IMX8QM_M4_0_PIT_DIV 535
+#define IMX8QM_M4_0_PIT_CLK 536
+#define IMX8QM_M4_0_TPM_DIV 537
+#define IMX8QM_M4_0_TPM_CLK 538
+#define IMX8QM_M4_0_UART_DIV 539
+#define IMX8QM_M4_0_UART_CLK 540
+#define IMX8QM_M4_0_WDOG_DIV 541
+#define IMX8QM_M4_0_WDOG_CLK 542
+#define IMX8QM_M4_1_CORE_DIV 543
+#define IMX8QM_M4_1_CORE_CLK 544
+#define IMX8QM_M4_1_I2C_DIV 545
+#define IMX8QM_M4_1_I2C_CLK 546
+#define IMX8QM_M4_1_PIT_DIV 547
+#define IMX8QM_M4_1_PIT_CLK 548
+#define IMX8QM_M4_1_TPM_DIV 549
+#define IMX8QM_M4_1_TPM_CLK 550
+#define IMX8QM_M4_1_UART_DIV 551
+#define IMX8QM_M4_1_UART_CLK 552
+#define IMX8QM_M4_1_WDOG_DIV 553
+#define IMX8QM_M4_1_WDOG_CLK 554
+
+/* IPG clocks */
+#define IMX8QM_24MHZ 555
+#define IMX8QM_GPT_3M 556
+#define IMX8QM_IPG_DMA_CLK_ROOT 557
+#define IMX8QM_IPG_AUD_CLK_ROOT 558
+#define IMX8QM_IPG_CONN_CLK_ROOT 559
+#define IMX8QM_AHB_CONN_CLK_ROOT 560
+#define IMX8QM_AXI_CONN_CLK_ROOT 561
+#define IMX8QM_IPG_MIPI_CSI_CLK_ROOT 562
+#define IMX8QM_DC_AXI_EXT_CLK 563
+#define IMX8QM_DC_AXI_INT_CLK 564
+#define IMX8QM_DC_CFG_CLK 565
+#define IMX8QM_HDMI_IPG_CLK 566
+#define IMX8QM_LVDS_IPG_CLK 567
+#define IMX8QM_IMG_AXI_CLK 568
+#define IMX8QM_IMG_IPG_CLK 569
+#define IMX8QM_IMG_PXL_CLK 570
+#define IMX8QM_CSI0_I2C0_IPG_CLK 571
+#define IMX8QM_CSI0_PWM0_IPG_CLK 572
+#define IMX8QM_CSI1_I2C0_IPG_CLK 573
+#define IMX8QM_CSI1_PWM0_IPG_CLK 574
+#define IMX8QM_DC0_DPR0_B_CLK 575
+#define IMX8QM_DC0_DPR1_B_CLK 576
+#define IMX8QM_DC1_DPR0_B_CLK 577
+#define IMX8QM_DC1_DPR1_B_CLK 578
+#define IMX8QM_32KHZ 579
+#define IMX8QM_HSIO_AXI_CLK 580
+#define IMX8QM_HSIO_PER_CLK 581
+#define IMX8QM_HDMI_RX_GPIO_IPG_S_CLK 582
+#define IMX8QM_HDMI_RX_PWM_IPG_S_CLK 583
+#define IMX8QM_HDMI_RX_PWM_IPG_CLK 584
+#define IMX8QM_HDMI_RX_I2C_DIV_CLK 585
+#define IMX8QM_HDMI_RX_I2C_IPG_S_CLK 586
+#define IMX8QM_HDMI_RX_I2C_IPG_CLK 587
+#define IMX8QM_HDMI_RX_SINK_PCLK 588
+#define IMX8QM_HDMI_RX_SINK_SCLK 589
+#define IMX8QM_HDMI_RX_PXL_ENC_CLK 590
+#define IMX8QM_HDMI_RX_IPG_CLK 591
+
+/* ACM */
+#define IMX8QM_HDMI_RX_MCLK 592
+#define IMX8QM_EXT_AUD_MCLK0 593
+#define IMX8QM_EXT_AUD_MCLK1 594
+#define IMX8QM_ESAI0_RX_CLK 595
+#define IMX8QM_ESAI0_RX_HF_CLK 596
+#define IMX8QM_ESAI0_TX_CLK 597
+#define IMX8QM_ESAI0_TX_HF_CLK 598
+#define IMX8QM_ESAI1_RX_CLK 599
+#define IMX8QM_ESAI1_RX_HF_CLK 600
+#define IMX8QM_ESAI1_TX_CLK 601
+#define IMX8QM_ESAI1_TX_HF_CLK 602
+#define IMX8QM_SPDIF0_RX 603
+#define IMX8QM_SPDIF1_RX 604
+#define IMX8QM_SAI0_RX_BCLK 605
+#define IMX8QM_SAI0_TX_BCLK 606
+#define IMX8QM_SAI1_RX_BCLK 607
+#define IMX8QM_SAI1_TX_BCLK 608
+#define IMX8QM_SAI2_RX_BCLK 609
+#define IMX8QM_SAI3_RX_BCLK 610
+#define IMX8QM_HDMI_RX_SAI0_RX_BCLK 611
+#define IMX8QM_SAI6_RX_BCLK 612
+#define IMX8QM_HDMI_TX_SAI0_TX_BCLK 613
+
+#define IMX8QM_ACM_AUD_CLK0_SEL 614
+#define IMX8QM_ACM_AUD_CLK0_CLK 615
+#define IMX8QM_ACM_AUD_CLK1_SEL 616
+#define IMX8QM_ACM_AUD_CLK1_CLK 617
+#define IMX8QM_ACM_MCLKOUT0_SEL 618
+#define IMX8QM_ACM_MCLKOUT0_CLK 619
+#define IMX8QM_ACM_MCLKOUT1_SEL 620
+#define IMX8QM_ACM_MCLKOUT1_CLK 621
+#define IMX8QM_ACM_ASRC0_MUX_CLK_SEL 622
+#define IMX8QM_ACM_ASRC0_MUX_CLK_CLK 623
+#define IMX8QM_ACM_ASRC1_MUX_CLK_SEL 624
+#define IMX8QM_ACM_ASRC1_MUX_CLK_CLK 625
+#define IMX8QM_ACM_ESAI0_MCLK_SEL 626
+#define IMX8QM_ACM_ESAI0_MCLK_CLK 627
+#define IMX8QM_ACM_ESAI1_MCLK_SEL 628
+#define IMX8QM_ACM_ESAI1_MCLK_CLK 629
+#define IMX8QM_ACM_GPT0_MUX_CLK_SEL 630
+#define IMX8QM_ACM_GPT0_MUX_CLK_CLK 631
+#define IMX8QM_ACM_GPT1_MUX_CLK_SEL 632
+#define IMX8QM_ACM_GPT1_MUX_CLK_CLK 633
+#define IMX8QM_ACM_GPT2_MUX_CLK_SEL 634
+#define IMX8QM_ACM_GPT2_MUX_CLK_CLK 635
+#define IMX8QM_ACM_GPT3_MUX_CLK_SEL 636
+#define IMX8QM_ACM_GPT3_MUX_CLK_CLK 637
+#define IMX8QM_ACM_GPT4_MUX_CLK_SEL 638
+#define IMX8QM_ACM_GPT4_MUX_CLK_CLK 639
+#define IMX8QM_ACM_GPT5_MUX_CLK_SEL 640
+#define IMX8QM_ACM_GPT5_MUX_CLK_CLK 641
+#define IMX8QM_ACM_SAI0_MCLK_SEL 642
+#define IMX8QM_ACM_SAI0_MCLK_CLK 643
+#define IMX8QM_ACM_SAI1_MCLK_SEL 644
+#define IMX8QM_ACM_SAI1_MCLK_CLK 645
+#define IMX8QM_ACM_SAI2_MCLK_SEL 646
+#define IMX8QM_ACM_SAI2_MCLK_CLK 647
+#define IMX8QM_ACM_SAI3_MCLK_SEL 648
+#define IMX8QM_ACM_SAI3_MCLK_CLK 649
+#define IMX8QM_ACM_HDMI_RX_SAI0_MCLK_SEL 650
+#define IMX8QM_ACM_HDMI_RX_SAI0_MCLK_CLK 651
+#define IMX8QM_ACM_HDMI_TX_SAI0_MCLK_SEL 652
+#define IMX8QM_ACM_HDMI_TX_SAI0_MCLK_CLK 653
+#define IMX8QM_ACM_SAI6_MCLK_SEL 654
+#define IMX8QM_ACM_SAI6_MCLK_CLK 655
+#define IMX8QM_ACM_SAI7_MCLK_SEL 656
+#define IMX8QM_ACM_SAI7_MCLK_CLK 657
+#define IMX8QM_ACM_SPDIF0_TX_CLK_SEL 658
+#define IMX8QM_ACM_SPDIF0_TX_CLK_CLK 659
+#define IMX8QM_ACM_SPDIF1_TX_CLK_SEL 660
+#define IMX8QM_ACM_SPDIF1_TX_CLK_CLK 661
+#define IMX8QM_ACM_MQS_TX_CLK_SEL 662
+#define IMX8QM_ACM_MQS_TX_CLK_CLK 663
+
+#define IMX8QM_ENET0_REF_25MHZ_125MHZ_SEL 664
+#define IMX8QM_ENET0_REF_25MHZ_125MHZ_CLK 665
+#define IMX8QM_ENET1_REF_25MHZ_125MHZ_SEL 666
+#define IMX8QM_ENET1_REF_25MHZ_125MHZ_CLK 667
+#define IMX8QM_ENET0_REF_50MHZ_CLK 668
+#define IMX8QM_ENET1_REF_50MHZ_CLK 669
+#define IMX8QM_ENET_25MHZ_CLK 670
+#define IMX8QM_ENET_125MHZ_CLK 671
+#define IMX8QM_ENET0_REF_DIV 672
+#define IMX8QM_ENET0_REF_CLK 673
+#define IMX8QM_ENET1_REF_DIV 674
+#define IMX8QM_ENET1_REF_CLK 675
+#define IMX8QM_ENET0_RMII_TX_CLK 676
+#define IMX8QM_ENET1_RMII_TX_CLK 677
+#define IMX8QM_ENET0_RMII_TX_SEL 678
+#define IMX8QM_ENET1_RMII_TX_SEL 679
+#define IMX8QM_ENET0_RMII_RX_CLK 680
+#define IMX8QM_ENET1_RMII_RX_CLK 681
+
+#define IMX8QM_KPP_CLK 683
+#define IMX8QM_GPT0_HF_CLK 684
+#define IMX8QM_GPT0_IPG_S_CLK 685
+#define IMX8QM_GPT0_IPG_SLV_CLK 686
+#define IMX8QM_GPT0_IPG_MSTR_CLK 687
+#define IMX8QM_GPT1_HF_CLK 688
+#define IMX8QM_GPT1_IPG_S_CLK 689
+#define IMX8QM_GPT1_IPG_SLV_CLK 690
+#define IMX8QM_GPT1_IPG_MSTR_CLK 691
+#define IMX8QM_GPT2_HF_CLK 692
+#define IMX8QM_GPT2_IPG_S_CLK 693
+#define IMX8QM_GPT2_IPG_SLV_CLK 694
+#define IMX8QM_GPT2_IPG_MSTR_CLK 695
+#define IMX8QM_GPT3_HF_CLK 696
+#define IMX8QM_GPT3_IPG_S_CLK 697
+#define IMX8QM_GPT3_IPG_SLV_CLK 698
+#define IMX8QM_GPT3_IPG_MSTR_CLK 699
+#define IMX8QM_GPT4_HF_CLK 700
+#define IMX8QM_GPT4_IPG_S_CLK 701
+#define IMX8QM_GPT4_IPG_SLV_CLK 702
+#define IMX8QM_GPT4_IPG_MSTR_CLK 703
+#define IMX8QM_PWM0_HF_CLK 704
+#define IMX8QM_PWM0_IPG_S_CLK 705
+#define IMX8QM_PWM0_IPG_SLV_CLK 706
+#define IMX8QM_PWM0_IPG_MSTR_CLK 707
+#define IMX8QM_PWM1_HF_CLK 708
+#define IMX8QM_PWM1_IPG_S_CLK 709
+#define IMX8QM_PWM1_IPG_SLV_CLK 710
+#define IMX8QM_PWM1_IPG_MSTR_CLK 711
+#define IMX8QM_PWM2_HF_CLK 712
+#define IMX8QM_PWM2_IPG_S_CLK 713
+#define IMX8QM_PWM2_IPG_SLV_CLK 714
+#define IMX8QM_PWM2_IPG_MSTR_CLK 715
+#define IMX8QM_PWM3_HF_CLK 716
+#define IMX8QM_PWM3_IPG_S_CLK 717
+#define IMX8QM_PWM3_IPG_SLV_CLK 718
+#define IMX8QM_PWM3_IPG_MSTR_CLK 719
+#define IMX8QM_PWM4_HF_CLK 720
+#define IMX8QM_PWM4_IPG_S_CLK 721
+#define IMX8QM_PWM4_IPG_SLV_CLK 722
+#define IMX8QM_PWM4_IPG_MSTR_CLK 723
+#define IMX8QM_PWM5_HF_CLK 724
+#define IMX8QM_PWM5_IPG_S_CLK 725
+#define IMX8QM_PWM5_IPG_SLV_CLK 726
+#define IMX8QM_PWM5_IPG_MSTR_CLK 727
+#define IMX8QM_PWM6_HF_CLK 728
+#define IMX8QM_PWM6_IPG_S_CLK 729
+#define IMX8QM_PWM6_IPG_SLV_CLK 730
+#define IMX8QM_PWM6_IPG_MSTR_CLK 731
+#define IMX8QM_PWM7_HF_CLK 732
+#define IMX8QM_PWM7_IPG_S_CLK 733
+#define IMX8QM_PWM7_IPG_SLV_CLK 734
+#define IMX8QM_PWM7_IPG_MSTR_CLK 735
+#define IMX8QM_FSPI0_HCLK 736
+#define IMX8QM_FSPI0_IPG_CLK 737
+#define IMX8QM_FSPI0_IPG_S_CLK 738
+#define IMX8QM_FSPI1_HCLK 736
+#define IMX8QM_FSPI1_IPG_CLK 737
+#define IMX8QM_FSPI1_IPG_S_CLK 738
+#define IMX8QM_GPIO0_IPG_S_CLK 739
+#define IMX8QM_GPIO1_IPG_S_CLK 740
+#define IMX8QM_GPIO2_IPG_S_CLK 741
+#define IMX8QM_GPIO3_IPG_S_CLK 742
+#define IMX8QM_GPIO4_IPG_S_CLK 743
+#define IMX8QM_GPIO5_IPG_S_CLK 744
+#define IMX8QM_GPIO6_IPG_S_CLK 745
+#define IMX8QM_GPIO7_IPG_S_CLK 746
+#define IMX8QM_ROMCP_CLK 747
+#define IMX8QM_ROMCP_REG_CLK 748
+#define IMX8QM_96KROM_CLK 749
+#define IMX8QM_OCRAM_MEM_CLK 750
+#define IMX8QM_OCRAM_CTRL_CLK 751
+#define IMX8QM_LSIO_BUS_CLK 752
+#define IMX8QM_LSIO_MEM_CLK 753
+#define IMX8QM_LVDS0_LIS_IPG_CLK 754
+#define IMX8QM_LVDS1_LIS_IPG_CLK 755
+#define IMX8QM_MIPI0_LIS_IPG_CLK 756
+#define IMX8QM_MIPI0_I2C0_IPG_S_CLK 757
+#define IMX8QM_MIPI0_I2C0_IPG_CLK 758
+#define IMX8QM_MIPI0_I2C1_IPG_S_CLK 759
+#define IMX8QM_MIPI0_I2C1_IPG_CLK 760
+#define IMX8QM_MIPI0_CLK_ROOT 761
+#define IMX8QM_MIPI1_LIS_IPG_CLK 762
+#define IMX8QM_MIPI1_I2C0_IPG_S_CLK 763
+#define IMX8QM_MIPI1_I2C0_IPG_CLK 764
+#define IMX8QM_MIPI1_I2C1_IPG_S_CLK 765
+#define IMX8QM_MIPI1_I2C1_IPG_CLK 766
+#define IMX8QM_MIPI1_CLK_ROOT 767
+#define IMX8QM_DC0_DISP0_SEL 768
+#define IMX8QM_DC0_DISP1_SEL 769
+#define IMX8QM_DC1_DISP0_SEL 770
+#define IMX8QM_DC1_DISP1_SEL 771
+
+/* CM40 */
+#define IMX8QM_CM40_IPG_CLK 772
+#define IMX8QM_CM40_I2C_DIV 773
+#define IMX8QM_CM40_I2C_CLK 774
+#define IMX8QM_CM40_I2C_IPG_CLK 775
+
+/* CM41 */
+#define IMX8QM_CM41_IPG_CLK 776
+#define IMX8QM_CM41_I2C_DIV 777
+#define IMX8QM_CM41_I2C_CLK 778
+#define IMX8QM_CM41_I2C_IPG_CLK 779
+
+#define IMX8QM_HDMI_PXL_SEL 780
+#define IMX8QM_HDMI_PXL_LINK_SEL 781
+#define IMX8QM_HDMI_PXL_MUX_SEL 782
+#define IMX8QM_HDMI_AV_PLL_BYPASS_CLK 783
+
+#define IMX8QM_HDMI_RX_PXL_SEL 784
+#define IMX8QM_HDMI_RX_HD_REF_SEL 785
+#define IMX8QM_HDMI_RX_HD_CORE_SEL 786
+#define IMX8QM_HDMI_RX_DIG_PLL_CLK 787
+
+#define IMX8QM_LSIO_MU5A_IPG_S_CLK 788
+#define IMX8QM_LSIO_MU5A_IPG_CLK 789
+#define IMX8QM_LSIO_MU6A_IPG_S_CLK 790
+#define IMX8QM_LSIO_MU6A_IPG_CLK 791
+
+/* DSP */
+#define IMX8QM_AUD_DSP_ADB_ACLK 792
+#define IMX8QM_AUD_DSP_IPG 793
+#define IMX8QM_AUD_DSP_CORE_CLK 794
+#define IMX8QM_AUD_OCRAM_IPG 795
+
+#define IMX8QM_CLK_END 796
+
+#endif /* __DT_BINDINGS_CLOCK_IMX8QM_H */
--
2.16.4
next prev parent reply other threads:[~2019-03-05 2:32 UTC|newest]
Thread overview: 654+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-05 2:32 [U-Boot] [PATCH RESEND 01/10] pinctrl: imx8: add i.MX8QM compatible Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 02/10] dt-bindings: pinctrl: add i.MX8QM pads definition Peng Fan
2019-03-05 2:32 ` Peng Fan [this message]
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 04/10] arm: dts: introduce dtsi for i.MX8QM Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 05/10] imx8: add cpu support Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 06/10] clk: imx8: split code into common and soc specific part Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 07/10] clk: imx8: add i.MX8QM clk driver Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 08/10] imx8: imx8-pins: add i.MX8QM Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 09/10] misc: imx8: scu: add i.MX8QM support Peng Fan
2019-03-05 2:32 ` [U-Boot] [PATCH RESEND 10/10] imx: support i.MX8QM MEK board Peng Fan
2019-04-09 12:48 ` Peng Fan
2019-03-18 8:42 ` [U-Boot] [PATCH RESEND 01/10] pinctrl: imx8: add i.MX8QM compatible Peng Fan
-- strict thread matches above, loose matches on Subject: below --
2019-05-12 20:43 [U-Boot] [PATCH] ARM: imx: apalis_imx6: Drop ad-hoc SATA binding Marek Vasut
2019-05-23 10:48 ` Marcel Ziswiler
2019-04-22 10:41 [U-Boot] [PATCH] ddr: imx8m: hide i.MX8M DDR options from device driver entry Peng Fan
2019-04-17 23:57 [U-Boot] [PATCH v3 00/14] colibri-imx6ull device tree enablement and driver model conversion Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 01/14] tdx-cfg-block: add support for new colibri iMX6ull skus Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 02/14] tdx-cfg-block: simplify i.MX 6 module detection Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 03/14] colibri-imx6ull: set module variant depending on config block Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 04/14] apalis/colibri_imx6/imx6ull: make sure loadaddr does not collide Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 05/14] colibri-imx6ull: fix ethernet phy power on Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 06/14] board: imx6ull: Add disable PMIC_STBY_REQ Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 07/14] colibri-imx6ull: configuration clean-up Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 08/14] colibri-imx6ull: migrate pinctrl and regulators to dtb/dm Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 09/14] colibri-imx6ull: migrate mmc to using driver model Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 10/14] colibri-imx6ull: migrate usb " Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 11/14] colibri-imx6ull: migrate fec " Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 12/14] ARM: dts: colibri-imx6ull: fix uart-has-rtscts property Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 13/14] ARM: dts: colibri-imx6ull: add osc32k_32k_out pinctrl Marcel Ziswiler
2019-04-17 23:57 ` [U-Boot] [PATCH v3 14/14] ARM: dts: colibri-imx6ull: update device tree Marcel Ziswiler
2019-04-17 23:47 [U-Boot] [PATCH v3] ARM: dts: i.MX6Q: fix avoid_unnecessary_addr_size warnings Marcel Ziswiler
2019-04-17 9:41 [U-Boot] [PATCH] imx: i.MX8MQ: clear ocotp error bit Peng Fan
2019-04-17 9:41 ` [U-Boot] [PATCH 1/2] mxc_ocotp: Update redundancy banks for mx7ulp B0 Peng Fan
2019-04-17 9:41 ` [U-Boot] [PATCH 2/2] mxc_ocotp: Disable fuse sense for imx8mq B1 Peng Fan
2019-04-15 12:00 [U-Boot] [PATCH] imx: 8qxp_mek: fix fdt_file and console Peng Fan
2019-04-15 13:31 ` Fabio Estevam
2019-04-26 18:42 ` [U-Boot] [REGRESSION] " Marcel Ziswiler
2019-04-27 0:11 ` Peng Fan
2019-04-15 9:13 [U-Boot] [PATCH v2 1/2] ARM: imx6: DHCOM i.MX6 PDK: use Kconfig for inclusion of DDR calibration Ludwig Zenz
2019-04-15 5:20 [U-Boot] [PATCH] imx: add lowlevel init for ARM64 Peng Fan
2019-04-26 18:38 ` [U-Boot] [REGRESSION] " Marcel Ziswiler
2019-04-26 23:58 ` Peng Fan
2019-04-28 16:52 ` Stefano Babic
2019-04-28 18:24 ` Joe Hershberger
2019-04-28 23:33 ` Marcel Ziswiler
2019-04-13 8:21 [U-Boot] [PATCH] ARM: imx: Fix typo in select option for ZMX25 Chris Packham
2019-04-15 16:32 ` Fabio Estevam
2019-04-15 16:50 ` Stefano Babic
2019-04-12 7:54 [U-Boot] [PATCH 1/8] imx: sip: add call_imx_sip_ret2 Peng Fan
2019-04-12 7:54 ` [U-Boot] [PATCH 2/8] imx8: fuse: add fuse driver Peng Fan
2019-04-12 7:54 ` [U-Boot] [PATCH 3/8] imx8qxp: mek: Enable CMD_FUSE Peng Fan
2019-04-12 7:55 ` [U-Boot] [PATCH 4/8] misc: imx8: add sc_misc_get_temp Peng Fan
2019-04-12 7:55 ` [U-Boot] [PATCH 5/8] thermal: add i.MX8 thermal driver Peng Fan
2019-04-12 7:55 ` [U-Boot] [PATCH 6/8] imx8: cpu: get temperature when print cpu desc Peng Fan
2019-04-25 10:35 ` Stefano Babic
2019-04-25 13:46 ` Peng Fan
2019-04-25 14:23 ` Stefano Babic
2019-04-12 7:55 ` [U-Boot] [PATCH 7/8] imx: imx8dx/qxp: enable thermal Peng Fan
2019-04-12 7:55 ` [U-Boot] [PATCH 8/8] imx8: mek: move HUSH_PARSER to defconfig Peng Fan
2019-04-09 15:25 [U-Boot] [PATCH v2 0/5] colibri imx8qxp 2gb wb it v1.0b module support Marcel Ziswiler
2019-04-09 15:25 ` [U-Boot] [PATCH v2 1/5] misc: imx8: remove duplicates from scfw api Marcel Ziswiler
2019-04-09 15:25 ` [U-Boot] [PATCH v2 2/5] arm: dts: imx8dx: add lpuart1, lpuart2, lpuart3 Marcel Ziswiler
2019-04-09 15:25 ` [U-Boot] [PATCH v2 3/5] board: toradex: tdx-cfg-block: clean-up sku handling Marcel Ziswiler
2019-04-09 15:25 ` [U-Boot] [PATCH v2 4/5] board: toradex: tdx-cfg-block: add new skus Marcel Ziswiler
2019-04-09 15:25 ` [U-Boot] [PATCH v2 5/5] board: toradex: add colibri imx8qxp 2gb wb it v1.0b module support Marcel Ziswiler
2019-04-11 10:47 ` Igor Opaniuk
2019-04-26 9:20 ` Marcel Ziswiler
2019-04-26 9:46 ` Stefano Babic
2019-04-26 9:58 ` Marcel Ziswiler
2019-04-26 10:39 ` Stefano Babic
2019-04-25 10:48 ` Stefano Babic
2019-04-25 12:35 ` Marcel Ziswiler
2019-04-25 14:52 ` Stefano Babic
2019-04-26 2:10 ` Peng Fan
2019-04-26 8:38 ` Stefano Babic
2019-04-26 8:53 ` Peng Fan
2019-04-26 8:54 ` Marcel Ziswiler
2019-04-26 9:03 ` Peng Fan
2019-04-26 9:38 ` Marcel Ziswiler
2019-04-26 9:59 ` Peng Fan
2019-04-09 15:24 [U-Boot] [PATCH v2 00/14] colibri-imx6ull device tree enablement and driver model conversion Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 01/14] tdx-cfg-block: add support for new colibri iMX6ull skus Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 02/14] tdx-cfg-block: simplify i.MX 6 module detection Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 03/14] colibri-imx6ull: set module variant depending on config block Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 04/14] apalis/colibri_imx6/imx6ull: make sure loadaddr does not collide Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 05/14] colibri-imx6ull: fix ethernet phy power on Marcel Ziswiler
2019-04-11 8:05 ` Igor Opaniuk
2019-04-09 15:24 ` [U-Boot] [PATCH v2 06/14] board: imx6ull: Add disable PMIC_STBY_REQ Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 07/14] colibri-imx6ull: configuration clean-up Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 08/14] colibri-imx6ull: migrate pinctrl and regulators to dtb/dm Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 09/14] colibri-imx6ull: migrate mmc to using driver model Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 10/14] colibri-imx6ull: migrate usb " Marcel Ziswiler
2019-04-17 7:58 ` Igor Opaniuk
2019-04-09 15:24 ` [U-Boot] [PATCH v2 11/14] colibri-imx6ull: migrate fec " Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 12/14] ARM: dts: colibri-imx6ull: fix uart-has-rtscts property Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 13/14] ARM: dts: colibri-imx6ull: add osc32k_32k_out pinctrl Marcel Ziswiler
2019-04-09 15:24 ` [U-Boot] [PATCH v2 14/14] ARM: dts: colibri-imx6ull: update device tree Marcel Ziswiler
2019-04-04 10:26 [U-Boot] [imx-next PATCH v1 00/14] imx: Fully convert HSC|DDC K+P i.MX53 based boards to use DM/DTS Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 01/14] ARM: Remove HSC|DDC ETH PHY reset code after switching to DM/DTS Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 02/14] DTS: Add esdhc3 device tree description tuning for HSC|DDC boards Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 03/14] ARM: Enable CONFIG_DM_MMC and CONFIG_DM_BLK on HSC and DDC boards Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 04/14] ARM: defconfig: Move CONFIG_FSL_ESDHC to Kconfig Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 05/14] ARM: Remove non DM/DTS esdhc3 code from HSC|DDC board related files Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 06/14] ARM: kp_imx53: config: Do not use ${boardtype} to setup update wic file Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 07/14] DTS: Provide USB host DTS description for i.MX53 devices Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 08/14] DTS: Enable USB host support (including regulators) on HSC|DDC boards Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 09/14] ARM: Remove EHCI specific code from HSC|DDC board file Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 10/14] USB: DM: Convert i.MX5 ehci code to driver model Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 11/14] ARM: defconfig: kp_imx53: Enable DM_USB support on HSC|DDC boards Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 12/14] ARM: config: Remove not needed CONFIG_MXC_USB_PORT define Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 13/14] Convert CONFIG_USB_EHCI_MX5 to Kconfig Lukasz Majewski
2019-04-04 10:26 ` [U-Boot] [imx-next PATCH v1 14/14] boot.src: Provide dsa_core.blacklist bootarg when booting via NFS Lukasz Majewski
2019-03-28 22:25 [U-Boot] [PATCH v1] colibri_vf: fix tab vs. spaces Marcel Ziswiler
2019-03-29 11:27 ` Igor Opaniuk
2019-03-28 22:24 [U-Boot] [PATCH v1] colibri_vf: fix ethernet by adding explicit phy node Marcel Ziswiler
2019-03-29 5:54 ` Hannes Schmelzer
2019-03-29 11:25 ` Igor Opaniuk
2019-03-25 16:24 [U-Boot] [PATCH v2 00/22] colibri vybrid fixes, device tree enablement and driver model conversion Marcel Ziswiler
2019-03-25 16:24 ` [U-Boot] [PATCH v2 01/22] Add missing space in comment Marcel Ziswiler
2019-03-25 16:24 ` [U-Boot] [PATCH v2 02/22] vf610: ddrmc: add missing include Marcel Ziswiler
2019-04-01 8:18 ` Lukasz Majewski
2019-03-25 16:24 ` [U-Boot] [PATCH v2 03/22] imx: bootaux: add dependency on vf610 Marcel Ziswiler
2019-04-01 8:18 ` Lukasz Majewski
2019-03-25 16:24 ` [U-Boot] [PATCH v2 04/22] configs: move CONFIG_USB_EHCI_VF to Kconfig Marcel Ziswiler
[not found] ` <swarren@nvidia.com>
2019-04-01 8:18 ` Lukasz Majewski
2019-03-25 16:24 ` [U-Boot] [PATCH v2 05/22] configs: colibri_vf: remove obsolete mmc/sd card environment Marcel Ziswiler
2019-04-01 8:19 ` Lukasz Majewski
2019-03-25 16:24 ` [U-Boot] [PATCH v2 06/22] configs: colibri_vf: limit size of malloc() pool before relocation Marcel Ziswiler
2019-04-01 8:19 ` Lukasz Majewski
2019-03-25 16:24 ` [U-Boot] [PATCH v2 07/22] configs: move CONFIG_MXC_OCOTP to Kconfig Marcel Ziswiler
2019-03-25 16:24 ` [U-Boot] [PATCH v2 08/22] ARM: dts: colibri_vf: update device trees Marcel Ziswiler
2019-03-25 16:24 ` [U-Boot] [PATCH v2 09/22] configs: colibri_vf: disable obscure options Marcel Ziswiler
2019-03-28 16:58 ` Igor Opaniuk
2019-03-29 9:08 ` Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 10/22] colibri_vf: migrate pinctrl and regulators to dtb/dm Marcel Ziswiler
2019-03-28 15:09 ` Igor Opaniuk
2019-03-25 16:25 ` [U-Boot] [PATCH v2 11/22] colibri_vf: migrate fec, esdhc, nfc and usb to driver model Marcel Ziswiler
2019-03-28 14:43 ` Igor Opaniuk
2019-03-25 16:25 ` [U-Boot] [PATCH v2 12/22] config: colibri_vf: use macros from linux/sizes.h Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 13/22] colibri_vf: add distroboot support Marcel Ziswiler
2019-03-28 15:01 ` Igor Opaniuk
2019-03-28 15:20 ` Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 14/22] colibri_vf: set fdtfile for distroboot Marcel Ziswiler
2019-03-28 15:06 ` Igor Opaniuk
2019-03-25 16:25 ` [U-Boot] [PATCH v2 15/22] colibri_vf: sync the board info message Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 16/22] colibri_vf: enable user debug by default Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 17/22] colibri_vf: disable undefined instruction events in user debug Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 18/22] config: colibri_vf: enable mtd partitions via dt Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 19/22] arm: vf610: add uart2 clock/pinmux support Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 20/22] colibri_vf: adjust timing according to data sheet Marcel Ziswiler
2019-03-28 16:41 ` Igor Opaniuk
2019-03-25 16:25 ` [U-Boot] [PATCH v2 21/22] colibri_vf: use leveling evaluated by DDR validation tools Marcel Ziswiler
2019-03-25 16:25 ` [U-Boot] [PATCH v2 22/22] colibri_vf: fix sdboot for vybrid modules Marcel Ziswiler
2019-03-18 22:29 [U-Boot] [PATCH 00/17] Convert some imx6 boards to DM_VIDEO Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 01/17] video: ipuv3: add DM_VIDEO support Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 02/17] video: move ipuv3 files to subdirectory Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 03/17] imx: move CONFIG_VIDEO_IPUV3 to defconfigs Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 04/17] imx6: dts: add 'u-boot, dm-pre-reloc' to soc and ipu nodes Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 05/17] apalis_imx6: convert to DM_VIDEO Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 06/17] imx6: icore: " Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 07/17] imx6: ge_bx50v3: " Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 08/17] colibri_imx6: " Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 09/17] mx6sabresd: " Anatolij Gustschin
2019-09-16 18:18 ` Fabio Estevam
2019-09-16 19:21 ` Anatolij Gustschin
2019-09-16 19:50 ` Anatolij Gustschin
2019-09-17 12:32 ` Fabio Estevam
2019-09-17 21:42 ` Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 10/17] mx6sabreauto: " Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 11/17] imx6: wandboard: add device tree Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 12/17] imx6: wandboard: convert to DM_GPIO and enable pinctrl driver Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 13/17] imx6: wandboard: convert to DM_USB Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 14/17] imx6: wandboard: convert to DM_VIDEO Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 15/17] imx6: wandboard: convert to DM_PMIC Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 16/17] imx6: wandboard: convert to DM_I2C Anatolij Gustschin
2019-03-18 22:29 ` [U-Boot] [PATCH 17/17] imx6: wandboard: convert to DM_MMC Anatolij Gustschin
2019-03-18 22:37 ` [U-Boot] [PATCH 00/17] Convert some imx6 boards to DM_VIDEO Anatolij Gustschin
2019-03-20 13:25 ` Fabio Estevam
2019-03-20 13:38 ` Anatolij Gustschin
2019-03-20 13:40 ` Fabio Estevam
2019-03-07 12:43 [U-Boot] [PATCH] imx8qxp: mek: enable dm-spl for pm Peng Fan
2019-03-18 8:43 ` Peng Fan
2019-04-09 12:47 ` Peng Fan
2019-03-01 12:10 [U-Boot] [PATCH 00/10] tbs2910 fixes and driver model conversion Soeren Moch
2019-03-01 12:10 ` [U-Boot] [PATCH 01/10] board: tbs2910: Fix default environment Soeren Moch
2019-03-14 19:16 ` Soeren Moch
2019-03-14 19:18 ` Stefano Babic
2019-03-01 12:10 ` [U-Boot] [PATCH 02/10] board: tbs2910: Remove efi loader support in defconfig to reduce u-boot size Soeren Moch
2019-04-01 8:59 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-03-01 12:10 ` [U-Boot] [PATCH 03/10] board: tbs2910: Add device tree Soeren Moch
2019-04-01 8:59 ` [U-Boot] [U-Boot,03/10] " sbabic at denx.de
2019-03-01 12:10 ` [U-Boot] [PATCH 04/10] board: tbs2910: Add pinctrl driver and convert gpio to driver model Soeren Moch
2019-04-01 8:52 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-03-01 12:10 ` [U-Boot] [PATCH 05/10] board: tbs2910: Convert usb " Soeren Moch
2019-04-01 8:52 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-03-01 12:10 ` [U-Boot] [PATCH 06/10] board: tbs2910: Convert i2c and rtc " Soeren Moch
2019-04-01 8:59 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-03-01 12:10 ` [U-Boot] [PATCH 07/10] ata: dwc_ahsata: Fix sector reports for large disks Soeren Moch
2019-04-01 8:52 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-03-01 12:10 ` [U-Boot] [PATCH 08/10] ata: dwc_ahsata: Add ahci driver model support Soeren Moch
2019-03-07 8:33 ` Soeren Moch
2019-03-08 20:19 ` Soeren Moch
[not found] ` <smoch@web.de>
[not found] ` <marcel@ziswiler.com>
2019-04-01 8:59 ` [U-Boot] [U-Boot, 09/10] board: tbs2910: Convert sata to ahci driver model sbabic at denx.de
2019-03-01 12:11 ` [U-Boot] [PATCH " Soeren Moch
2019-03-01 12:11 ` [U-Boot] [PATCH 10/10] board: tbs2910: Convert mmc to " Soeren Moch
2019-04-01 8:59 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-02-13 21:46 [U-Boot] [PATCH v4 00/22] imx: vybrid: Update BK4 and PCM052 boards to only use DM/DTS Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 01/22] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 02/22] net: Kconfig: FEC: Add dependency on VF610 Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 03/22] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 04/22] vybrid: clock: Provide enable_i2c_clk() function for Vybrid Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 05/22] pcm052: board: Do not enable I2C2 code in the board file Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 06/22] vybrid: Define the imx_get_mac_from_fuse() as a __weak function Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 07/22] pcm052: board: Remove "m4go" command as it is superseded by "bootaux" Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 08/22] pcm052: board: vybrid: Update the board name for BK4 device Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 09/22] ARM: DTS: vybrid: Update vf.dtsi file to descibe more vf610 hardware Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 10/22] pcm052: board: cosmetic: Add copyright notice to pcm052.c Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 11/22] ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052) Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 12/22] ARM: DTS: Provide vf610-bk4r1-u-boot.dtsi for U-Boot specific properties Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 13/22] defconfig: bk4/pcm052: Update bk4r1|pcm052_defconfig to support DM/DT Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 14/22] config: pcm052: Use SZ_X{MK} from linux/sizes.h for include/configs/pcm052.h Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 15/22] config: bk4: Update include/configs/bk4r1.h file Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 16/22] pcm052: board: Remove in-board setup code (it is now replaced by DM setup) Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 17/22] config: bk4: Update u-boot script to support recovery via SD card Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 18/22] config: bk4: Update u-boot envs to support NOR memories initial setup Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 19/22] pcm052: bk4: sdcard: Add support for SD card booting/recovery Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 20/22] pcm052: board: Add code to setup LED default states Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 21/22] pcm052: mac: Provide board specific imx_get_mac_from_fuse() function Lukasz Majewski
2019-02-13 21:46 ` [U-Boot] [PATCH v4 22/22] pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy Lukasz Majewski
2019-03-04 22:26 ` Joe Hershberger
2019-03-04 22:35 ` Lukasz Majewski
2019-02-08 17:42 [U-Boot] [PATCH v1 00/26] colibri imx6 fixes, device tree enablement and driver model conversion Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 01/26] colibri_imx6: get rid of obsolete nospl configurations Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 02/26] colibri_imx6: use distro defaults Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 03/26] colibri_imx6: move console in env from header file to defconfig Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 04/26] colibri_imx6: enable fit image, gpt, imx thermal, efi loader support Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 05/26] colibri_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 06/26] colibri_imx6: migrate to using device tree Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 07/26] colibri_imx6: clean-up and migrate gpios to using driver model Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 08/26] colibri_imx6: enable pin control driver Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 09/26] colibri_imx6: migrate i2c to using driver model Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 10/26] colibri_imx6: migrate pmic and regulator " Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 11/26] colibri_imx6: migrate mmc " Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 12/26] colibri_imx6: migrate usb " Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 13/26] colibri_imx6: drop CONFIG_OF_SYSTEM_SETUP Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 14/26] colibri_imx6: print also 64-bit IT Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 15/26] colibri_imx6: add distroboot support Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 16/26] colibri_imx6: unify sd/mmc drive strenght with linux kernel settings Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 17/26] colibri imx6: pf0100: reorder and cleanup message printing Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 18/26] colibri imx6: disable ri and dcd irq in uarts Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 19/26] colibri_imx6: change pmic fusing according to hw 1.1 requirements Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 20/26] colibri_imx6: revert fuse value set in mfgr_fuse Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 21/26] toradex: colibri_imx6: overwrite CMA memory set in device tree Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 22/26] configs: colibri_imx6: Use ext4 file system by default Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 23/26] colibri_imx6: use SDP if USB serial downloader has been used Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 24/26] colibri_imx6: switch to zimage Marcel Ziswiler
2019-02-08 21:42 ` Lukasz Majewski
2019-02-08 21:48 ` Marcel Ziswiler
2019-02-08 17:42 ` [U-Boot] [PATCH v1 25/26] colibri_imx6: added nreset gpio on reboot Marcel Ziswiler
[not found] ` <gerard.salvatella@toradex.com>
[not found] ` <igor.opaniuk@toradex.com>
[not found] ` <support.arm@toradex.com>
2019-04-26 9:37 ` [U-Boot] [U-Boot, v3, 14/14] ARM: dts: colibri-imx6ull: update device tree sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, v2, 12/14] ARM: dts: colibri-imx6ull: fix uart-has-rtscts property sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, v3, 13/14] ARM: dts: colibri-imx6ull: add osc32k_32k_out pinctrl sbabic at denx.de
[not found] ` <antti.maentausta@ge.com>
2019-04-26 9:38 ` [U-Boot] [U-Boot, imx-next, v1, 13/14] Convert CONFIG_USB_EHCI_MX5 to Kconfig sbabic at denx.de
2019-02-08 17:42 ` [U-Boot] [PATCH v1 26/26] board: colibri_imx6: check for and report ecc errors in fuses Marcel Ziswiler
2019-02-08 17:12 [U-Boot] [PATCH v2 00/23] apalis imx6 fixes, device tree enablement and driver model conversion Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 01/23] apalis_imx6: get rid of obsolete nospl configurations Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 02/23] apalis_imx6: use distro defaults Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 03/23] apalis_imx6: move console in env from header file to defconfig Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 04/23] apalis_imx6: enable fit image, gpt, imx thermal, efi loader support Marcel Ziswiler
2019-03-12 10:45 ` Igor Opaniuk
2019-02-08 17:12 ` [U-Boot] [PATCH v2 05/23] apalis_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration Marcel Ziswiler
2019-03-12 10:46 ` Igor Opaniuk
2019-02-08 17:12 ` [U-Boot] [PATCH v2 06/23] apalis_imx6: migrate to using device tree Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 07/23] apalis_imx6: clean-up and migrate gpios to using driver model Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 08/23] apalis_imx6: enable pin control driver Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 09/23] apalis_imx6: migrate i2c to using driver model Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 10/23] apalis_imx6: migrate pmic and regulator " Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 11/23] apalis_imx6: migrate mmc and sata " Marcel Ziswiler
2019-02-25 10:39 ` Soeren Moch
2019-03-01 12:20 ` Soeren Moch
2019-03-01 12:29 ` Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 12/23] apalis_imx6: migrate usb " Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 13/23] apalis_imx6: drop CONFIG_OF_SYSTEM_SETUP Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 14/23] apalis_imx6: add distroboot support Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 15/23] apalis_imx6: use both sd/mmc interfaces for setsdupdate Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 16/23] apalis_imx6: unify sd/mmc drive strength with linux kernel settings Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 17/23] apalis_imx6: pf0100: reorder and cleanup message printing Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 18/23] apalis_imx6: disable ri and dcd irq in uarts Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 19/23] apalis_imx6: revert fuse value set in mfgr_fuse Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 20/23] configs: apalis_imx6: Use ext4 file system by default Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 21/23] apalis_imx6: use SDP if USB serial downloader has been used Marcel Ziswiler
2019-02-08 17:12 ` [U-Boot] [PATCH v2 22/23] apalis_imx6: switch to zimage Marcel Ziswiler
[not found] ` <bhuvanchandra.dv@toradex.com>
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 15/22] colibri_vf: sync the board info message sbabic at denx.de
2019-02-08 17:12 ` [U-Boot] [PATCH v2 23/23] board: apalis_imx6: check for and report ecc errors in fuses Marcel Ziswiler
2019-02-01 16:40 [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support Abel Vesa
2019-02-01 16:40 ` [U-Boot] [PATCH v4 01/20] common: spl_fit: Fix the spl_fit_image_get_os for FIT_IMAGE_TINY Abel Vesa
2019-02-01 19:01 ` Tom Rini
2019-02-01 21:08 ` Lukasz Majewski
2019-02-02 9:40 ` Fabio Estevam
2019-02-16 9:23 ` Stefano Babic
2019-02-18 8:27 ` Abel Vesa
2019-02-01 16:40 ` [U-Boot] [PATCH v4 02/20] usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE Abel Vesa
2019-02-02 9:40 ` Fabio Estevam
2019-02-02 21:46 ` Lukasz Majewski
2019-02-01 16:40 ` [U-Boot] [PATCH v4 03/20] usb: ehci-mx6: Make regulator DM_REGULATOR dependent Abel Vesa
2019-02-02 9:41 ` Fabio Estevam
2019-02-02 21:47 ` Lukasz Majewski
2019-02-01 16:40 ` [U-Boot] [PATCH v4 04/20] configs: imx6sabreauto: Add DM_MMC support Abel Vesa
2019-02-02 9:41 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 05/20] configs: imx6sabreauto: Add DM_USB support Abel Vesa
2019-02-02 9:42 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 06/20] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds Abel Vesa
2019-02-02 9:42 ` Fabio Estevam
2019-02-02 21:48 ` Lukasz Majewski
2019-02-01 16:40 ` [U-Boot] [PATCH v4 07/20] board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL Abel Vesa
2019-02-02 9:43 ` Fabio Estevam
2019-02-02 21:48 ` Lukasz Majewski
2019-02-01 16:40 ` [U-Boot] [PATCH v4 08/20] board: mx6sabreauto: " Abel Vesa
2019-02-02 9:43 ` Fabio Estevam
2019-02-02 21:49 ` Lukasz Majewski
2019-02-01 16:40 ` [U-Boot] [PATCH v4 09/20] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files Abel Vesa
2019-02-02 9:44 ` Fabio Estevam
2019-02-02 21:50 ` Lukasz Majewski
2019-02-01 16:40 ` [U-Boot] [PATCH v4 10/20] arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] Abel Vesa
2019-02-02 9:45 ` Fabio Estevam
2019-02-02 21:50 ` Lukasz Majewski
2019-02-01 16:40 ` [U-Boot] [PATCH v4 11/20] configs: mx6sabreauto: Add SPL FIT and DM support Abel Vesa
2019-02-02 9:45 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 12/20] configs: mx6sabresd: " Abel Vesa
2019-02-02 9:45 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 14/20] mx6sabresd: Add DM_GPIO support Abel Vesa
2019-02-02 9:46 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 13/20] mx6sabreauto: " Abel Vesa
2019-02-02 9:46 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 15/20] configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs Abel Vesa
2019-02-02 9:46 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 17/20] board: mx6sabreauto: Remove the non-DM code Abel Vesa
2019-02-02 9:47 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 16/20] configs: mx6sabresd: Add DM_SPI_FLASH necessary configs Abel Vesa
2019-02-02 9:47 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 18/20] board: mx6sabresd: Remove non-DM code Abel Vesa
2019-02-02 9:47 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 19/20] board: mx6sabresd: Remove the enet reset gpio handling Abel Vesa
2019-02-02 9:48 ` Fabio Estevam
2019-02-28 19:01 ` Soeren Moch
2019-02-28 19:24 ` Fabio Estevam
2019-02-01 16:40 ` [U-Boot] [PATCH v4 20/20] configs: mx6sabresd: Reduce SPL size by disabling DOS, EXT and EFI support Abel Vesa
2019-02-02 9:49 ` Fabio Estevam
2019-02-01 17:13 ` [U-Boot] [PATCH v4 00/20] mx6sabre: Add DM and SPL FIT support Fabio Estevam
2019-02-01 17:59 ` Abel Vesa
2019-02-01 18:18 ` Fabio Estevam
2019-02-01 19:01 ` Tom Rini
2019-02-02 9:50 ` Fabio Estevam
2019-02-04 9:55 ` Abel Vesa
2019-02-04 11:03 ` Fabio Estevam
2019-02-04 13:19 ` Tom Rini
2019-02-04 15:15 ` Abel Vesa
2019-02-04 15:21 ` Simon Goldschmidt
2019-02-04 15:30 ` Tom Rini
2019-02-09 22:48 ` Abel Vesa
2019-02-09 22:55 ` Fabio Estevam
2019-02-01 15:04 [U-Boot] [PATCH v1 0/3] imx: cpu.c, serial_mxc, dts fixes/improvements Marcel Ziswiler
2019-02-01 15:04 ` [U-Boot] [PATCH v1 1/3] ARM: dts: i.MX6Q, i.MX6QDL: fix address/size-cells warnings Marcel Ziswiler
[not found] ` <trini@konsulko.com>
2019-02-16 10:26 ` [U-Boot] [U-Boot, v1, " sbabic at denx.de
2019-02-01 15:04 ` [U-Boot] [PATCH v1 2/3] imx: serial_mxc: disable ri and dcd irq in dte mode Marcel Ziswiler
2019-02-15 12:26 ` Stefano Babic
2019-02-01 15:04 ` [U-Boot] [PATCH v1 3/3] imx: cpu.c: give access to reset cause in spl Marcel Ziswiler
2019-01-18 8:58 [U-Boot] [PATCH] imx8: cpu: restrict checking ROM passover info for revA Peng Fan
[not found] ` <uboot-imx@nxp.com>
2019-01-30 8:57 ` [U-Boot] " sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot, V2, 06/10] dts: imx8qxp-mek: introduce u-boot dtsi sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot,V2,08/10] imx: build flash.bin for i.MX8 sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot,V2,10/10] imx8qxp: mek: update README sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot,V2,09/10] imx8qxp: mek: default enable SPL sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot,V2,01/10] imx8qxp: add SUPPORT_SPL option sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot,V2,03/10] arm: imx: build mach-imx for i.MX8 sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot, V2, 07/10] imx: mkimage_fit_atf: introduce BL33_BASE_ADDR sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot,V2,05/10] spl: imx8: add spl boot device sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot,V2,04/10] gpio: introduce CONFIG_SPL_DM_PCA953X sbabic at denx.de
2019-01-30 9:15 ` [U-Boot] [U-Boot,V2,02/10] imx8: scu: use dedicated MU for SPL sbabic at denx.de
[not found] ` <peng.fan@nxp.com>
2019-02-16 10:26 ` [U-Boot] [U-Boot,v4,18/20] board: mx6sabresd: Remove non-DM code sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 17/20] board: mx6sabreauto: Remove the " sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 07/20] board: mx6sabresd: Add board_fit_config_name_match to support FIT in SPL sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 15/20] configs: mx6sabreauto: Add DM_SPI_FLASH necessary configs sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 05/20] configs: imx6sabreauto: Add DM_USB support sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 06/20] mmc: fsl_esdhc: Fix DM_REGULATOR ifdefs for SPL builds sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 09/20] arm: dts: Add all the imx6[q|qp|dl] sabre[auto|sd] u-boot dts[i] files sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 12/20] configs: mx6sabresd: Add SPL FIT and DM support sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 04/20] configs: imx6sabreauto: Add DM_MMC support sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 01/20] common: spl_fit: Fix the spl_fit_image_get_os for FIT_IMAGE_TINY sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 16/20] configs: mx6sabresd: Add DM_SPI_FLASH necessary configs sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v4, 19/20] board: mx6sabresd: Remove the enet reset gpio handling sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot, v4, 03/20] usb: ehci-mx6: Make regulator DM_REGULATOR dependent sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot, v4, 20/20] configs: mx6sabresd: Reduce SPL size by disabling DOS, EXT and EFI support sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot,v4,13/20] mx6sabreauto: Add DM_GPIO support sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot, v4, 11/20] configs: mx6sabreauto: Add SPL FIT and DM support sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot, v4, 08/20] board: mx6sabreauto: Add board_fit_config_name_match to support FIT in SPL sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot, v4, 10/20] arm: dts: Update all the dts[i] files for imx6[q|qp|dl] sabre[auto|sd] sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot,v4,14/20] mx6sabresd: Add DM_GPIO support sbabic at denx.de
2019-02-16 10:45 ` [U-Boot] [U-Boot, v4, 02/20] usb: Rename SPL_USB_SUPPORT to SPL_USB_STORAGE sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v4, 19/22] pcm052: bk4: sdcard: Add support for SD card booting/recovery sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 19/22] arm: vf610: add uart2 clock/pinmux support sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,v2,02/22] vf610: ddrmc: add missing include sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot,v2,03/22] imx: bootaux: add dependency on vf610 sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot,RESEND,07/10] clk: imx8: add i.MX8QM clk driver sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] ARM: imx: Fix typo in select option for ZMX25 sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot,RESEND,05/10] imx8: add cpu support sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] imx: 8qxp_mek: fix fdt_file and console sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot,2/2] mxc_ocotp: Disable fuse sense for imx8mq B1 sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, 1/2] mxc_ocotp: Update redundancy banks for mx7ulp B0 sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot,3/8] imx8qxp: mek: Enable CMD_FUSE sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, imx-next, v1, 03/14] ARM: Enable CONFIG_DM_MMC and CONFIG_DM_BLK on HSC and DDC boards sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, RESEND, 03/10] dt-bindings: clock: dt-bindings: pinctrl: add i.MX8QM clocks definition sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot,RESEND,10/10] imx: support i.MX8QM MEK board sbabic at denx.de
2019-04-26 10:50 ` Marcel Ziswiler
2019-04-26 10:56 ` Stefano Babic
2019-04-26 9:37 ` [U-Boot] [U-Boot,1/8] imx: sip: add call_imx_sip_ret2 sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, RESEND, 01/10] pinctrl: imx8: add i.MX8QM compatible sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] imx: i.MX8MQ: clear ocotp error bit sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, imx-next, v1, 11/14] ARM: defconfig: kp_imx53: Enable DM_USB support on HSC|DDC boards sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, RESEND, 09/10] misc: imx8: scu: add i.MX8QM support sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot, RESEND, 06/10] clk: imx8: split code into common and soc specific part sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot,2/8] imx8: fuse: add fuse driver sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] ddr: imx8m: hide i.MX8M DDR options from device driver entry sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot, RESEND, 04/10] arm: dts: introduce dtsi for i.MX8QM sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] imx8qxp: mek: enable dm-spl for pm sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot, RESEND, 02/10] dt-bindings: pinctrl: add i.MX8QM pads definition sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot,RESEND,08/10] imx8: imx8-pins: add i.MX8QM sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] imx: add lowlevel init for ARM64 sbabic at denx.de
2019-04-26 9:55 ` [U-Boot] [U-Boot,8/8] imx8: mek: move HUSH_PARSER to defconfig sbabic at denx.de
2019-01-08 11:42 [U-Boot] [PATCH v2 00/11] arm: Colibri iMX7 fixes and DM_MMC conversion Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 01/11] colibri_imx7: fix boot commands Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 02/11] arm: dts: imx7: colibri: split dt for raw NAND and eMMC devices Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 03/11] configs: colibri_imx7: enable DM for raw NAND devices Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 04/11] configs: colibri_imx7: use separate device tree Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 05/11] arm: dts: imx7: colibri: add usdhci peripherals to " Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 06/11] configs: colibri_imx7: use DM_MMC Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 07/11] colibri_imx7: drop legacy usdhc support Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 08/11] configs: colibri_imx7: enable CAAM driver Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 09/11] configs: colibri_imx7: use DFU for NAND instead of MMC Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 10/11] configs: colibri_imx7: use distro defaults Stefan Agner
2019-01-08 11:42 ` [U-Boot] [PATCH v2 11/11] configs: add default configuraiton for Colibri iMX7 with eMMC Stefan Agner
[not found] ` <stefan.agner@toradex.com>
[not found] ` <martyn.welch@collabora.com>
[not found] ` <ian.ray@ge.com>
2019-03-13 9:28 ` [U-Boot] [U-Boot,v1,15/26] colibri_imx6: add distroboot support sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot,v2,14/23] apalis_imx6: " sbabic at denx.de
2019-03-13 9:30 ` [U-Boot] [U-Boot, v1, 23/26] colibri_imx6: use SDP if USB serial downloader has been used sbabic at denx.de
[not found] ` <marcel.ziswiler@toradex.com>
[not found] ` <max.krummenacher@toradex.com>
[not found] ` <Ken.Lin@advantech.com.tw>
2019-01-30 8:57 ` [U-Boot] [U-Boot, v2, 11/11] configs: add default configuraiton for Colibri iMX7 with eMMC sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot, v2, 04/11] configs: colibri_imx7: use separate device tree sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot, v2, 10/11] configs: colibri_imx7: use distro defaults sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot, v2, 02/11] arm: dts: imx7: colibri: split dt for raw NAND and eMMC devices sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot, v2, 07/11] colibri_imx7: drop legacy usdhc support sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot,v2,01/11] colibri_imx7: fix boot commands sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot, v2, 03/11] configs: colibri_imx7: enable DM for raw NAND devices sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot,v2,06/11] configs: colibri_imx7: use DM_MMC sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot, v2, 09/11] configs: colibri_imx7: use DFU for NAND instead of MMC sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot, v2, 05/11] arm: dts: imx7: colibri: add usdhci peripherals to device tree sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] [U-Boot, v2, 08/11] configs: colibri_imx7: enable CAAM driver sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot, v1, 2/3] imx: serial_mxc: disable ri and dcd irq in dte mode sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v1, 25/26] colibri_imx6: added nreset gpio on reboot sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v1, 11/26] colibri_imx6: migrate mmc to using driver model sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v2, 10/23] apalis_imx6: migrate pmic and regulator " sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v1, 17/26] colibri imx6: pf0100: reorder and cleanup message printing sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v1, 22/26] configs: colibri_imx6: Use ext4 file system by default sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot,v1,14/26] colibri_imx6: print also 64-bit IT sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 13/23] apalis_imx6: drop CONFIG_OF_SYSTEM_SETUP sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot,v2,02/23] apalis_imx6: use distro defaults sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 07/23] apalis_imx6: clean-up and migrate gpios to using driver model sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 12/23] apalis_imx6: migrate usb " sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v1, 12/26] colibri_imx6: " sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 15/23] apalis_imx6: use both sd/mmc interfaces for setsdupdate sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 16/23] apalis_imx6: unify sd/mmc drive strength with linux kernel settings sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v1, 05/26] colibri_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v1, 08/26] colibri_imx6: enable pin control driver sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 19/23] apalis_imx6: revert fuse value set in mfgr_fuse sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot,v2,22/23] apalis_imx6: switch to zimage sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot,v1,02/26] colibri_imx6: use distro defaults sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 03/23] apalis_imx6: move console in env from header file to defconfig sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v1, 21/26] toradex: colibri_imx6: overwrite CMA memory set in device tree sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot,v1,24/26] colibri_imx6: switch to zimage sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 06/23] apalis_imx6: migrate to using device tree sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v2, 20/23] configs: apalis_imx6: Use ext4 file system by default sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v1, 19/26] colibri_imx6: change pmic fusing according to hw 1.1 requirements sbabic at denx.de
2019-03-13 9:30 ` [U-Boot] [U-Boot, v1, 10/26] colibri_imx6: migrate pmic and regulator to using driver model sbabic at denx.de
2019-03-13 9:30 ` [U-Boot] [U-Boot, v2, 18/23] apalis_imx6: disable ri and dcd irq in uarts sbabic at denx.de
2019-03-13 9:30 ` [U-Boot] [U-Boot, v2, 09/23] apalis_imx6: migrate i2c to using driver model sbabic at denx.de
2019-03-13 9:30 ` [U-Boot] [U-Boot, v2, 01/23] apalis_imx6: get rid of obsolete nospl configurations sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 18/26] colibri imx6: disable ri and dcd irq in uarts sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 03/26] colibri_imx6: move console in env from header file to defconfig sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 06/26] colibri_imx6: migrate to using device tree sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 26/26] board: colibri_imx6: check for and report ecc errors in fuses sbabic at denx.de
2019-03-24 21:42 ` Marcel Ziswiler
2019-03-25 12:14 ` Stefano Babic
2019-03-13 9:38 ` [U-Boot] [U-Boot, v2, 11/23] apalis_imx6: migrate mmc and sata to using driver model sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 04/26] colibri_imx6: enable fit image, gpt, imx thermal, efi loader support sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 09/26] colibri_imx6: migrate i2c to using driver model sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 16/26] colibri_imx6: unify sd/mmc drive strenght with linux kernel settings sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot,v2,08/23] apalis_imx6: enable pin control driver sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 01/26] colibri_imx6: get rid of obsolete nospl configurations sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 07/26] colibri_imx6: clean-up and migrate gpios to using driver model sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 20/26] colibri_imx6: revert fuse value set in mfgr_fuse sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v2, 17/23] apalis_imx6: pf0100: reorder and cleanup message printing sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v1, 13/26] colibri_imx6: drop CONFIG_OF_SYSTEM_SETUP sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v2, 05/23] apalis_imx6: remove obsolete USB_GADGET_MASS_STORAGE configuration sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v2, 23/23] board: apalis_imx6: check for and report ecc errors in fuses sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v2, 04/23] apalis_imx6: enable fit image, gpt, imx thermal, efi loader support sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,13/17] imx6: wandboard: convert to DM_USB sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,11/17] imx6: wandboard: add device tree sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,17/17] imx6: wandboard: convert to DM_MMC sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,08/17] colibri_imx6: convert to DM_VIDEO sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,10/17] mx6sabreauto: " sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, 03/17] imx: move CONFIG_VIDEO_IPUV3 to defconfigs sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, 12/17] imx6: wandboard: convert to DM_GPIO and enable pinctrl driver sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,16/17] imx6: wandboard: convert to DM_I2C sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,14/17] imx6: wandboard: convert to DM_VIDEO sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,05/17] apalis_imx6: " sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,09/17] mx6sabresd: " sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,06/17] imx6: icore: " sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot,02/17] video: move ipuv3 files to subdirectory sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot,01/17] video: ipuv3: add DM_VIDEO support sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot, 04/17] imx6: dts: add 'u-boot, dm-pre-reloc' to soc and ipu nodes sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot,15/17] imx6: wandboard: convert to DM_PMIC sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot,07/17] imx6: ge_bx50v3: convert to DM_VIDEO sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, v2, 05/14] colibri-imx6ull: fix ethernet phy power on sbabic at denx.de
[not found] ` <dominik.sliwa@toradex.com>
2019-04-26 9:37 ` [U-Boot] [U-Boot, v2, 01/14] tdx-cfg-block: add support for new colibri iMX6ull skus sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, v2, 4/5] board: toradex: tdx-cfg-block: add new skus sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, v2, 3/5] board: toradex: tdx-cfg-block: clean-up sku handling sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v4, 17/22] config: bk4: Update u-boot script to support recovery via SD card sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v4, 05/22] pcm052: board: Do not enable I2C2 code in the board file sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v4, 07/22] pcm052: board: Remove "m4go" command as it is superseded by "bootaux" sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v4, 06/22] vybrid: Define the imx_get_mac_from_fuse() as a __weak function sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v4, 15/22] config: bk4: Update include/configs/bk4r1.h file sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v4, 10/22] pcm052: board: cosmetic: Add copyright notice to pcm052.c sbabic at denx.de
2019-03-13 9:28 ` [U-Boot] [U-Boot, v4, 04/22] vybrid: clock: Provide enable_i2c_clk() function for Vybrid sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v4, 14/22] config: pcm052: Use SZ_X{MK} from linux/sizes.h for include/configs/pcm052.h sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v4, 18/22] config: bk4: Update u-boot envs to support NOR memories initial setup sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v4, 12/22] ARM: DTS: Provide vf610-bk4r1-u-boot.dtsi for U-Boot specific properties sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v4, 21/22] pcm052: mac: Provide board specific imx_get_mac_from_fuse() function sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v4, 09/22] ARM: DTS: vybrid: Update vf.dtsi file to descibe more vf610 hardware sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v4, 13/22] defconfig: bk4/pcm052: Update bk4r1|pcm052_defconfig to support DM/DT sbabic at denx.de
2019-03-13 9:30 ` [U-Boot] [U-Boot, v4, 16/22] pcm052: board: Remove in-board setup code (it is now replaced by DM setup) sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v4, 03/22] vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions sbabic at denx.de
2019-03-13 9:47 ` [U-Boot] [U-Boot, v4, 20/22] pcm052: board: Add code to setup LED default states sbabic at denx.de
2019-03-13 9:47 ` [U-Boot] [U-Boot, v4, 01/22] net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c driver sbabic at denx.de
2019-03-13 9:47 ` [U-Boot] [U-Boot, v4, 02/22] net: Kconfig: FEC: Add dependency on VF610 sbabic at denx.de
2019-03-13 9:47 ` [U-Boot] [U-Boot, v4, 08/22] pcm052: board: vybrid: Update the board name for BK4 device sbabic at denx.de
2019-03-13 9:47 ` [U-Boot] [U-Boot, v4, 22/22] pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot, v2, 08/22] ARM: dts: colibri_vf: update device trees sbabic at denx.de
2019-03-13 9:38 ` [U-Boot] [U-Boot, v2, 21/23] apalis_imx6: use SDP if USB serial downloader has been used sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 11/22] colibri_vf: migrate fec, esdhc, nfc and usb to driver model sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 22/22] colibri_vf: fix sdboot for vybrid modules sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,v2,13/22] colibri_vf: add distroboot support sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 20/22] colibri_vf: adjust timing according to data sheet sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 12/22] config: colibri_vf: use macros from linux/sizes.h sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 10/22] colibri_vf: migrate pinctrl and regulators to dtb/dm sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 21/22] colibri_vf: use leveling evaluated by DDR validation tools sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 05/22] configs: colibri_vf: remove obsolete mmc/sd card environment sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot,v2,14/22] colibri_vf: set fdtfile for distroboot sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 06/22] configs: colibri_vf: limit size of malloc() pool before relocation sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot, v2, 17/22] colibri_vf: disable undefined instruction events in user debug sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot, v2, 18/22] config: colibri_vf: enable mtd partitions via dt sbabic at denx.de
2019-04-01 8:59 ` [U-Boot] [U-Boot, v2, 09/22] configs: colibri_vf: disable obscure options sbabic at denx.de
2019-04-01 9:09 ` [U-Boot] [U-Boot, v2, 16/22] colibri_vf: enable user debug by default sbabic at denx.de
2019-04-26 9:36 ` [U-Boot] [U-Boot, imx-next, v1, 01/14] ARM: Remove HSC|DDC ETH PHY reset code after switching to DM/DTS sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, imx-next, v1, 08/14] DTS: Enable USB host support (including regulators) on HSC|DDC boards sbabic at denx.de
[not found] ` <alison.wang@nxp.com>
[not found] ` <akshaybhat@timesys.com>
[not found] ` <lzenz@dh-electronics.de>
[not found] ` <eran.m@variscite.com>
2019-04-01 9:09 ` [U-Boot] [U-Boot, v2, 07/22] configs: move CONFIG_MXC_OCOTP to Kconfig sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, v2, 1/2] ARM: imx6: DHCOM i.MX6 PDK: use Kconfig for inclusion of DDR calibration sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, v2, 11/14] colibri-imx6ull: migrate fec to using driver model sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, v2, 09/14] colibri-imx6ull: migrate mmc " sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, imx-next, v1, 12/14] ARM: config: Remove not needed CONFIG_MXC_USB_PORT define sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, imx-next, v1, 10/14] USB: DM: Convert i.MX5 ehci code to driver model sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot,v1] colibri_vf: fix tab vs. spaces sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, v2, 02/14] tdx-cfg-block: simplify i.MX 6 module detection sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, imx-next, v1, 14/14] boot.src: Provide dsa_core.blacklist bootarg when booting via NFS sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, imx-next, v1, 07/14] DTS: Provide USB host DTS description for i.MX53 devices sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, imx-next, v1, 09/14] ARM: Remove EHCI specific code from HSC|DDC board file sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, imx-next, v1, 05/14] ARM: Remove non DM/DTS esdhc3 code from HSC|DDC board related files sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, imx-next, v1, 04/14] ARM: defconfig: Move CONFIG_FSL_ESDHC to Kconfig sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, v2, 06/14] board: imx6ull: Add disable PMIC_STBY_REQ sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, v2, 07/14] colibri-imx6ull: configuration clean-up sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, v2, 04/14] apalis/colibri_imx6/imx6ull: make sure loadaddr does not collide sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot, v1] colibri_vf: fix ethernet by adding explicit phy node sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot, imx-next, v1, 02/14] DTS: Add esdhc3 device tree description tuning for HSC|DDC boards sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot, v2, 03/14] colibri-imx6ull: set module variant depending on config block sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot, v2, 08/14] colibri-imx6ull: migrate pinctrl and regulators to dtb/dm sbabic at denx.de
2019-04-26 9:55 ` [U-Boot] [U-Boot, imx-next, v1, 06/14] ARM: kp_imx53: config: Do not use ${boardtype} to setup update wic file sbabic at denx.de
2019-04-26 9:55 ` [U-Boot] [U-Boot, v2, 10/14] colibri-imx6ull: migrate usb to using driver model sbabic at denx.de
2019-01-03 22:50 [U-Boot] [PATCH] ARM: imx: fix: Provide correct enum values for ONENAND/NOR boot recognition Lukasz Majewski
2019-01-03 6:54 [U-Boot] [PATCH 0/3] Migrate i.MX53 based cx9020 to CONFIG_DM_MMC=y linux-kernel-dev at beckhoff.com
2019-01-03 6:54 ` [U-Boot] [PATCH 1/3] mmc: fsl_esdhc: add compatible for fsl, imx53-esdhc linux-kernel-dev at beckhoff.com
2019-01-30 8:57 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-01-03 6:54 ` [U-Boot] [PATCH 2/3] arm: imx: Add esdhc1/2 nodes to imx53.dtsi linux-kernel-dev at beckhoff.com
2019-01-30 9:15 ` [U-Boot] [U-Boot,2/3] " sbabic at denx.de
2019-01-03 6:54 ` [U-Boot] [PATCH 3/3] dm: arm: imx: migrate cx9020 to CONFIG_DM_MMC linux-kernel-dev at beckhoff.com
2019-01-02 6:58 [U-Boot] [PATCH 1/2] tools/imx8m_image.sh: remove bashism Baruch Siach
2019-01-02 6:58 ` [U-Boot] [PATCH 2/2] imx8mq_evk/README: remove ARCH environment variable Baruch Siach
2019-01-03 13:41 ` [U-Boot] [PATCH 1/2] tools/imx8m_image.sh: remove bashism Christopher Spencer
2019-02-28 1:43 ` Fabio Estevam
2019-02-28 4:23 ` Baruch Siach
2019-04-01 13:20 ` Otavio Salvador
2019-04-01 13:46 ` Stefano Babic
2019-04-01 13:49 ` Fabio Estevam
2019-04-01 14:05 ` Stefano Babic
2019-04-01 14:14 ` Fabio Estevam
2019-04-01 15:51 ` Stefano Babic
2019-04-01 13:56 ` Otavio Salvador
2019-04-01 14:08 ` Tom Rini
2018-12-21 6:21 [U-Boot] [PATCH V2 00/10] i.MX8QXP: MEK: support SPL Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 01/10] imx8qxp: add SUPPORT_SPL option Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 02/10] imx8: scu: use dedicated MU for SPL Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 03/10] arm: imx: build mach-imx for i.MX8 Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 04/10] gpio: introduce CONFIG_SPL_DM_PCA953X Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 05/10] spl: imx8: add spl boot device Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 06/10] dts: imx8qxp-mek: introduce u-boot dtsi Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 07/10] imx: mkimage_fit_atf: introduce BL33_BASE_ADDR Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 08/10] imx: build flash.bin for i.MX8 Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 09/10] imx8qxp: mek: default enable SPL Peng Fan
2018-12-21 6:21 ` [U-Boot] [PATCH V2 10/10] imx8qxp: mek: update README Peng Fan
2018-12-11 18:40 [U-Boot] [PATCH 1/3] mx7: Do not call lcdif_power_down() in the SPL case Otavio Salvador
2018-12-11 18:40 ` [U-Boot] [PATCH 2/3] pico-imx7d: Add LCD support Otavio Salvador
2018-12-11 18:40 ` [U-Boot] [PATCH 3/3] logos: Add the TechNexion's logo Otavio Salvador
2019-02-18 22:53 ` Fabio Estevam
2019-03-20 17:39 ` Fabio Estevam
2018-12-12 1:47 ` [U-Boot] [PATCH 1/3] mx7: Do not call lcdif_power_down() in the SPL case Peng Fan
[not found] ` <otavio@ossystems.com.br>
[not found] ` <rui.silva@linaro.org>
[not found] ` <linux-imx@nxp.com>
2019-01-30 9:05 ` [U-Boot] [U-Boot, 2/2] imx8mq_evk/README: remove ARCH environment variable sbabic at denx.de
[not found] ` <20190130084020.812982D807F@tinkie.tkos.co.il>
2019-01-30 9:48 ` Baruch Siach
2019-01-30 14:33 ` Stefano Babic
2019-01-30 15:13 ` Baruch Siach
2019-01-30 15:30 ` Stefano Babic
[not found] ` <fabio.estevam@nxp.com>
[not found] ` <richard.hu@technexion.com>
[not found] ` <john.weber@technexion.com>
2019-01-30 8:57 ` [U-Boot] [U-Boot, 1/3] mx7: Do not call lcdif_power_down() in the SPL case sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot,2/3] pico-imx7d: Add LCD support sbabic at denx.de
2019-01-30 8:57 ` [U-Boot] [U-Boot, 3/3] dm: arm: imx: migrate cx9020 to CONFIG_DM_MMC sbabic at denx.de
2019-01-30 9:05 ` [U-Boot] ARM: imx: fix: Provide correct enum values for ONENAND/NOR boot recognition sbabic at denx.de
2019-02-16 10:26 ` [U-Boot] [U-Boot, v1, 3/3] imx: cpu.c: give access to reset cause in spl sbabic at denx.de
2019-02-16 10:35 ` [U-Boot] [U-Boot, v2, 2/3] ddr: vybrid: Provide code to perform on-boot calibration sbabic at denx.de
2019-02-16 10:45 ` [U-Boot] [U-Boot, v2, 1/3] ddr: vybrid: Add DDRMC calibration related registers (DQS to DQ) sbabic at denx.de
2019-02-16 10:45 ` [U-Boot] [U-Boot, v2, 3/3] ddr: vybrid: Add calibration code to memory controler's (DDRMC) setup code sbabic at denx.de
[not found] ` <marek.vasut+renesas@gmail.com>
2019-01-30 9:05 ` [U-Boot] [U-Boot,v4,2/2] imx: Add PHYTEC phyBOARD-i.MX6UL-Segin sbabic at denx.de
2019-03-13 9:29 ` [U-Boot] [U-Boot, v4, 11/22] ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052) sbabic at denx.de
2019-04-26 9:37 ` [U-Boot] [U-Boot, v3] ARM: dts: i.MX6Q: fix avoid_unnecessary_addr_size warnings sbabic at denx.de
2019-04-26 9:38 ` [U-Boot] [U-Boot, v2, 1/5] misc: imx8: remove duplicates from scfw api sbabic at denx.de
2019-04-26 9:45 ` [U-Boot] [U-Boot, v2, 2/5] arm: dts: imx8dx: add lpuart1, lpuart2, lpuart3 sbabic at denx.de
2019-06-10 9:19 ` [U-Boot] [PATCH] ARM: imx: apalis_imx6: Drop ad-hoc SATA binding <mailto:u-boot-request@lists.denx.de?subject=unsubscribe> <mailto:u-boot-request@lists.denx.de?subject=subscribe> sbabic at denx.de
[not found] ` <michal.simek@xilinx.com>
[not found] ` <maxime.ripard@bootlin.com>
[not found] ` <jason.hui.liu@nxp.com>
[not found] ` <breno.lima@nxp.com>
2019-01-30 9:05 ` [U-Boot] imx: hab: Convert non-NULL IVT DCD pointer warning to an error sbabic at denx.de
[not found] ` <albert.aribaud@3adev.fr>
[not found] ` <sr@denx.de>
2019-04-01 8:52 ` [U-Boot] [U-Boot, 08/10] ata: dwc_ahsata: Add ahci driver model support sbabic at denx.de
2019-04-01 8:52 ` [U-Boot] [U-Boot, v2, 04/22] configs: move CONFIG_USB_EHCI_VF to Kconfig sbabic at denx.de
2018-12-11 11:34 [U-Boot] [PATCH v4 1/2] Enable FEC driver to retrieve PHY address from device tree Martyn Welch
2018-12-11 11:34 ` [U-Boot] [PATCH v4 2/2] imx: Add PHYTEC phyBOARD-i.MX6UL-Segin Martyn Welch
2019-01-18 20:01 ` Martyn Welch
[not found] ` <joe.hershberger@ni.com>
2019-01-30 9:15 ` [U-Boot] [U-Boot, v4, 1/2] Enable FEC driver to retrieve PHY address from device tree sbabic at denx.de
2018-12-07 22:31 [U-Boot] [PATCH] imx: hab: Convert non-NULL IVT DCD pointer warning to an error Breno Matheus Lima
2019-01-16 12:00 ` Fabio Estevam
2018-12-05 16:04 [U-Boot] [PATCH v2 0/3] ddr: vybrid: Support for vf610 built-in DDR3 memory calibration Lukasz Majewski
2018-12-05 16:04 ` [U-Boot] [PATCH v2 1/3] ddr: vybrid: Add DDRMC calibration related registers (DQS to DQ) Lukasz Majewski
2018-12-05 16:04 ` [U-Boot] [PATCH v2 2/3] ddr: vybrid: Provide code to perform on-boot calibration Lukasz Majewski
2018-12-05 16:04 ` [U-Boot] [PATCH v2 3/3] ddr: vybrid: Add calibration code to memory controler's (DDRMC) setup code Lukasz Majewski
2019-01-02 11:28 ` [U-Boot] [PATCH v2 0/3] ddr: vybrid: Support for vf610 built-in DDR3 memory calibration Lukasz Majewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190305024401.2665-3-peng.fan@nxp.com \
--to=peng.fan@nxp.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.