[Qemu-devel] [RFC PULL 0/6] Block pull request for testing

[Qemu-devel] [RFC PULL 0/6] Block pull request for testing

[Stefan Hajnoczi]

Peter hit a virtio-blk-test failure caused by the new DISCARD/WRITE_ZEROES
patches that Stefano and I have been unable to reproduce.  Here are the patches
so they can be tested again in Peter's environment.

Stefano Garzarella (6):
  virtio-blk: add acct_failed param to virtio_blk_handle_rw_error()
  virtio-blk: add host_features field in VirtIOBlock
  virtio-blk: add "discard" and "write-zeroes" properties
  virtio-blk: add DISCARD and WRITE_ZEROES features
  tests/virtio-blk: change assert on data_size in virtio_blk_request()
  tests/virtio-blk: add test for WRITE_ZEROES command

 include/hw/virtio/virtio-blk.h |   5 +-
 hw/block/virtio-blk.c          | 214 +++++++++++++++++++++++++++++++--
 hw/core/machine.c              |   2 +
 tests/virtio-blk-test.c        |  75 +++++++++++-
 4 files changed, 282 insertions(+), 14 deletions(-)

-- 
2.20.1

[Qemu-devel] [RFC PULL 1/6] virtio-blk: add acct_failed param to virtio_blk_handle_rw_error()

[Stefan Hajnoczi]

From: Stefano Garzarella <sgarzare@redhat.com>

We add acct_failed param in order to use virtio_blk_handle_rw_error()
also when is not required to call block_acct_failed(). (eg. a discard
operation is failed)

Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Pankaj Gupta <pagupta@redhat.com>
Message-id: 20190208134950.187665-2-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 hw/block/virtio-blk.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c
index 9a87b3bfac..b2bb129efa 100644
--- a/hw/block/virtio-blk.c
+++ b/hw/block/virtio-blk.c
@@ -61,7 +61,7 @@ static void virtio_blk_req_complete(VirtIOBlockReq *req, unsigned char status)
 }
 
 static int virtio_blk_handle_rw_error(VirtIOBlockReq *req, int error,
-    bool is_read)
+    bool is_read, bool acct_failed)
 {
     BlockErrorAction action = blk_get_error_action(req->dev->blk,
                                                    is_read, error);
@@ -75,7 +75,9 @@ static int virtio_blk_handle_rw_error(VirtIOBlockReq *req, int error,
         s->rq = req;
     } else if (action == BLOCK_ERROR_ACTION_REPORT) {
         virtio_blk_req_complete(req, VIRTIO_BLK_S_IOERR);
-        block_acct_failed(blk_get_stats(s->blk), &req->acct);
+        if (acct_failed) {
+            block_acct_failed(blk_get_stats(s->blk), &req->acct);
+        }
         virtio_blk_free_request(req);
     }
 
@@ -113,7 +115,7 @@ static void virtio_blk_rw_complete(void *opaque, int ret)
              * the memory until the request is completed (which will
              * happen on the other side of the migration).
              */
-            if (virtio_blk_handle_rw_error(req, -ret, is_read)) {
+            if (virtio_blk_handle_rw_error(req, -ret, is_read, true)) {
                 continue;
             }
         }
@@ -132,7 +134,7 @@ static void virtio_blk_flush_complete(void *opaque, int ret)
 
     aio_context_acquire(blk_get_aio_context(s->conf.conf.blk));
     if (ret) {
-        if (virtio_blk_handle_rw_error(req, -ret, 0)) {
+        if (virtio_blk_handle_rw_error(req, -ret, 0, true)) {
             goto out;
         }
     }
-- 
2.20.1

[Qemu-devel] [RFC PULL 2/6] virtio-blk: add host_features field in VirtIOBlock

[Stefan Hajnoczi]

From: Stefano Garzarella <sgarzare@redhat.com>

Since configurable features for virtio-blk are growing, this patch
adds host_features field in the struct VirtIOBlock. (as in virtio-net)
In this way, we can avoid to add new fields for new properties and
we can directly set VIRTIO_BLK_F* flags in the host_features.

We update "config-wce" and "scsi" property definition to use the new
host_features field without change the behaviour.

Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Pankaj Gupta <pagupta@redhat.com>
Message-id: 20190208134950.187665-3-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 include/hw/virtio/virtio-blk.h |  3 +--
 hw/block/virtio-blk.c          | 16 +++++++++-------
 2 files changed, 10 insertions(+), 9 deletions(-)

diff --git a/include/hw/virtio/virtio-blk.h b/include/hw/virtio/virtio-blk.h
index 5117431d96..f7345b0511 100644
--- a/include/hw/virtio/virtio-blk.h
+++ b/include/hw/virtio/virtio-blk.h
@@ -35,8 +35,6 @@ struct VirtIOBlkConf
     BlockConf conf;
     IOThread *iothread;
     char *serial;
-    uint32_t scsi;
-    uint32_t config_wce;
     uint32_t request_merging;
     uint16_t num_queues;
     uint16_t queue_size;
@@ -57,6 +55,7 @@ typedef struct VirtIOBlock {
     bool dataplane_disabled;
     bool dataplane_started;
     struct VirtIOBlockDataPlane *dataplane;
+    uint64_t host_features;
 } VirtIOBlock;
 
 typedef struct VirtIOBlockReq {
diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c
index b2bb129efa..938273c63c 100644
--- a/hw/block/virtio-blk.c
+++ b/hw/block/virtio-blk.c
@@ -242,7 +242,7 @@ static int virtio_blk_handle_scsi_req(VirtIOBlockReq *req)
      */
     scsi = (void *)elem->in_sg[elem->in_num - 2].iov_base;
 
-    if (!blk->conf.scsi) {
+    if (!virtio_has_feature(blk->host_features, VIRTIO_BLK_F_SCSI)) {
         status = VIRTIO_BLK_S_UNSUPP;
         goto fail;
     }
@@ -783,12 +783,15 @@ static uint64_t virtio_blk_get_features(VirtIODevice *vdev, uint64_t features,
 {
     VirtIOBlock *s = VIRTIO_BLK(vdev);
 
+    /* Firstly sync all virtio-blk possible supported features */
+    features |= s->host_features;
+
     virtio_add_feature(&features, VIRTIO_BLK_F_SEG_MAX);
     virtio_add_feature(&features, VIRTIO_BLK_F_GEOMETRY);
     virtio_add_feature(&features, VIRTIO_BLK_F_TOPOLOGY);
     virtio_add_feature(&features, VIRTIO_BLK_F_BLK_SIZE);
     if (virtio_has_feature(features, VIRTIO_F_VERSION_1)) {
-        if (s->conf.scsi) {
+        if (virtio_has_feature(s->host_features, VIRTIO_BLK_F_SCSI)) {
             error_setg(errp, "Please set scsi=off for virtio-blk devices in order to use virtio 1.0");
             return 0;
         }
@@ -797,9 +800,6 @@ static uint64_t virtio_blk_get_features(VirtIODevice *vdev, uint64_t features,
         virtio_add_feature(&features, VIRTIO_BLK_F_SCSI);
     }
 
-    if (s->conf.config_wce) {
-        virtio_add_feature(&features, VIRTIO_BLK_F_CONFIG_WCE);
-    }
     if (blk_enable_write_cache(s->blk)) {
         virtio_add_feature(&features, VIRTIO_BLK_F_WCE);
     }
@@ -1014,9 +1014,11 @@ static Property virtio_blk_properties[] = {
     DEFINE_BLOCK_ERROR_PROPERTIES(VirtIOBlock, conf.conf),
     DEFINE_BLOCK_CHS_PROPERTIES(VirtIOBlock, conf.conf),
     DEFINE_PROP_STRING("serial", VirtIOBlock, conf.serial),
-    DEFINE_PROP_BIT("config-wce", VirtIOBlock, conf.config_wce, 0, true),
+    DEFINE_PROP_BIT64("config-wce", VirtIOBlock, host_features,
+                      VIRTIO_BLK_F_CONFIG_WCE, true),
 #ifdef __linux__
-    DEFINE_PROP_BIT("scsi", VirtIOBlock, conf.scsi, 0, false),
+    DEFINE_PROP_BIT64("scsi", VirtIOBlock, host_features,
+                      VIRTIO_BLK_F_SCSI, false),
 #endif
     DEFINE_PROP_BIT("request-merging", VirtIOBlock, conf.request_merging, 0,
                     true),
-- 
2.20.1

[Qemu-devel] [RFC PULL 3/6] virtio-blk: add "discard" and "write-zeroes" properties

[Stefan Hajnoczi]

From: Stefano Garzarella <sgarzare@redhat.com>

In order to avoid migration issues, we enable DISCARD and
WRITE_ZEROES features only for machine type >= 4.0

As discussed with Michael S. Tsirkin and Stefan Hajnoczi on the
list [1], DISCARD operation should not have security implications
(eg. page cache attacks), so we can enable it by default.

[1] https://lists.gnu.org/archive/html/qemu-devel/2019-02/msg00504.html

Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Pankaj Gupta <pagupta@redhat.com>
Message-id: 20190208134950.187665-4-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 hw/block/virtio-blk.c | 4 ++++
 hw/core/machine.c     | 2 ++
 2 files changed, 6 insertions(+)

diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c
index 938273c63c..6f2e86264d 100644
--- a/hw/block/virtio-blk.c
+++ b/hw/block/virtio-blk.c
@@ -1026,6 +1026,10 @@ static Property virtio_blk_properties[] = {
     DEFINE_PROP_UINT16("queue-size", VirtIOBlock, conf.queue_size, 128),
     DEFINE_PROP_LINK("iothread", VirtIOBlock, conf.iothread, TYPE_IOTHREAD,
                      IOThread *),
+    DEFINE_PROP_BIT64("discard", VirtIOBlock, host_features,
+                      VIRTIO_BLK_F_DISCARD, true),
+    DEFINE_PROP_BIT64("write-zeroes", VirtIOBlock, host_features,
+                      VIRTIO_BLK_F_WRITE_ZEROES, true),
     DEFINE_PROP_END_OF_LIST(),
 };
 
diff --git a/hw/core/machine.c b/hw/core/machine.c
index 077fbd182a..766ca5899d 100644
--- a/hw/core/machine.c
+++ b/hw/core/machine.c
@@ -33,6 +33,8 @@ GlobalProperty hw_compat_3_1[] = {
     { "usb-kbd", "serial", "42" },
     { "usb-mouse", "serial", "42" },
     { "usb-kbd", "serial", "42" },
+    { "virtio-blk-device", "discard", "false" },
+    { "virtio-blk-device", "write-zeroes", "false" },
 };
 const size_t hw_compat_3_1_len = G_N_ELEMENTS(hw_compat_3_1);
 
-- 
2.20.1

[Qemu-devel] [RFC PULL 4/6] virtio-blk: add DISCARD and WRITE_ZEROES features

[Stefan Hajnoczi]

From: Stefano Garzarella <sgarzare@redhat.com>

This patch adds the support of DISCARD and WRITE_ZEROES commands,
that have been introduced in the virtio-blk protocol to have
better performance when using SSD backend.

We support only one segment per request since multiple segments
are not widely used and there are no userspace APIs that allow
applications to submit multiple segments in a single call.

Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Pankaj Gupta <pagupta@redhat.com>
Message-id: 20190208134950.187665-5-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 include/hw/virtio/virtio-blk.h |   2 +
 hw/block/virtio-blk.c          | 184 +++++++++++++++++++++++++++++++++
 2 files changed, 186 insertions(+)

diff --git a/include/hw/virtio/virtio-blk.h b/include/hw/virtio/virtio-blk.h
index f7345b0511..015b523fe0 100644
--- a/include/hw/virtio/virtio-blk.h
+++ b/include/hw/virtio/virtio-blk.h
@@ -38,6 +38,8 @@ struct VirtIOBlkConf
     uint32_t request_merging;
     uint16_t num_queues;
     uint16_t queue_size;
+    uint32_t max_discard_sectors;
+    uint32_t max_write_zeroes_sectors;
 };
 
 struct VirtIOBlockDataPlane;
diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c
index 6f2e86264d..5d1b823b66 100644
--- a/hw/block/virtio-blk.c
+++ b/hw/block/virtio-blk.c
@@ -147,6 +147,30 @@ out:
     aio_context_release(blk_get_aio_context(s->conf.conf.blk));
 }
 
+static void virtio_blk_discard_write_zeroes_complete(void *opaque, int ret)
+{
+    VirtIOBlockReq *req = opaque;
+    VirtIOBlock *s = req->dev;
+    bool is_write_zeroes = (virtio_ldl_p(VIRTIO_DEVICE(s), &req->out.type) &
+                            ~VIRTIO_BLK_T_BARRIER) == VIRTIO_BLK_T_WRITE_ZEROES;
+
+    aio_context_acquire(blk_get_aio_context(s->conf.conf.blk));
+    if (ret) {
+        if (virtio_blk_handle_rw_error(req, -ret, false, is_write_zeroes)) {
+            goto out;
+        }
+    }
+
+    virtio_blk_req_complete(req, VIRTIO_BLK_S_OK);
+    if (is_write_zeroes) {
+        block_acct_done(blk_get_stats(s->blk), &req->acct);
+    }
+    virtio_blk_free_request(req);
+
+out:
+    aio_context_release(blk_get_aio_context(s->conf.conf.blk));
+}
+
 #ifdef __linux__
 
 typedef struct {
@@ -480,6 +504,84 @@ static bool virtio_blk_sect_range_ok(VirtIOBlock *dev,
     return true;
 }
 
+static uint8_t virtio_blk_handle_discard_write_zeroes(VirtIOBlockReq *req,
+    struct virtio_blk_discard_write_zeroes *dwz_hdr, bool is_write_zeroes)
+{
+    VirtIOBlock *s = req->dev;
+    VirtIODevice *vdev = VIRTIO_DEVICE(s);
+    uint64_t sector;
+    uint32_t num_sectors, flags, max_sectors;
+    uint8_t err_status;
+    int bytes;
+
+    sector = virtio_ldq_p(vdev, &dwz_hdr->sector);
+    num_sectors = virtio_ldl_p(vdev, &dwz_hdr->num_sectors);
+    flags = virtio_ldl_p(vdev, &dwz_hdr->flags);
+    max_sectors = is_write_zeroes ? s->conf.max_write_zeroes_sectors :
+                  s->conf.max_discard_sectors;
+
+    /*
+     * max_sectors is at most BDRV_REQUEST_MAX_SECTORS, this check
+     * make us sure that "num_sectors << BDRV_SECTOR_BITS" can fit in
+     * the integer variable.
+     */
+    if (unlikely(num_sectors > max_sectors)) {
+        err_status = VIRTIO_BLK_S_IOERR;
+        goto err;
+    }
+
+    bytes = num_sectors << BDRV_SECTOR_BITS;
+
+    if (unlikely(!virtio_blk_sect_range_ok(s, sector, bytes))) {
+        err_status = VIRTIO_BLK_S_IOERR;
+        goto err;
+    }
+
+    /*
+     * The device MUST set the status byte to VIRTIO_BLK_S_UNSUPP for discard
+     * and write zeroes commands if any unknown flag is set.
+     */
+    if (unlikely(flags & ~VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP)) {
+        err_status = VIRTIO_BLK_S_UNSUPP;
+        goto err;
+    }
+
+    if (is_write_zeroes) { /* VIRTIO_BLK_T_WRITE_ZEROES */
+        int blk_aio_flags = 0;
+
+        if (flags & VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP) {
+            blk_aio_flags |= BDRV_REQ_MAY_UNMAP;
+        }
+
+        block_acct_start(blk_get_stats(s->blk), &req->acct, bytes,
+                         BLOCK_ACCT_WRITE);
+
+        blk_aio_pwrite_zeroes(s->blk, sector << BDRV_SECTOR_BITS,
+                              bytes, blk_aio_flags,
+                              virtio_blk_discard_write_zeroes_complete, req);
+    } else { /* VIRTIO_BLK_T_DISCARD */
+        /*
+         * The device MUST set the status byte to VIRTIO_BLK_S_UNSUPP for
+         * discard commands if the unmap flag is set.
+         */
+        if (unlikely(flags & VIRTIO_BLK_WRITE_ZEROES_FLAG_UNMAP)) {
+            err_status = VIRTIO_BLK_S_UNSUPP;
+            goto err;
+        }
+
+        blk_aio_pdiscard(s->blk, sector << BDRV_SECTOR_BITS, bytes,
+                         virtio_blk_discard_write_zeroes_complete, req);
+    }
+
+    return VIRTIO_BLK_S_OK;
+
+err:
+    if (is_write_zeroes) {
+        block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_WRITE);
+    }
+    return err_status;
+}
+
 static int virtio_blk_handle_request(VirtIOBlockReq *req, MultiReqBuffer *mrb)
 {
     uint32_t type;
@@ -584,6 +686,47 @@ static int virtio_blk_handle_request(VirtIOBlockReq *req, MultiReqBuffer *mrb)
         virtio_blk_free_request(req);
         break;
     }
+    /*
+     * VIRTIO_BLK_T_DISCARD and VIRTIO_BLK_T_WRITE_ZEROES are defined with
+     * VIRTIO_BLK_T_OUT flag set. We masked this flag in the switch statement,
+     * so we must mask it for these requests, then we will check if it is set.
+     */
+    case VIRTIO_BLK_T_DISCARD & ~VIRTIO_BLK_T_OUT:
+    case VIRTIO_BLK_T_WRITE_ZEROES & ~VIRTIO_BLK_T_OUT:
+    {
+        struct virtio_blk_discard_write_zeroes dwz_hdr;
+        size_t out_len = iov_size(out_iov, out_num);
+        bool is_write_zeroes = (type & ~VIRTIO_BLK_T_BARRIER) ==
+                               VIRTIO_BLK_T_WRITE_ZEROES;
+        uint8_t err_status;
+
+        /*
+         * Unsupported if VIRTIO_BLK_T_OUT is not set or the request contains
+         * more than one segment.
+         */
+        if (unlikely(!(type & VIRTIO_BLK_T_OUT) ||
+                     out_len > sizeof(dwz_hdr))) {
+            virtio_blk_req_complete(req, VIRTIO_BLK_S_UNSUPP);
+            virtio_blk_free_request(req);
+            return 0;
+        }
+
+        if (unlikely(iov_to_buf(out_iov, out_num, 0, &dwz_hdr,
+                                sizeof(dwz_hdr)) != sizeof(dwz_hdr))) {
+            virtio_error(vdev, "virtio-blk discard/write_zeroes header"
+                         " too short");
+            return -1;
+        }
+
+        err_status = virtio_blk_handle_discard_write_zeroes(req, &dwz_hdr,
+                                                            is_write_zeroes);
+        if (err_status != VIRTIO_BLK_S_OK) {
+            virtio_blk_req_complete(req, err_status);
+            virtio_blk_free_request(req);
+        }
+
+        break;
+    }
     default:
         virtio_blk_req_complete(req, VIRTIO_BLK_S_UNSUPP);
         virtio_blk_free_request(req);
@@ -763,6 +906,24 @@ static void virtio_blk_update_config(VirtIODevice *vdev, uint8_t *config)
     blkcfg.alignment_offset = 0;
     blkcfg.wce = blk_enable_write_cache(s->blk);
     virtio_stw_p(vdev, &blkcfg.num_queues, s->conf.num_queues);
+    if (virtio_has_feature(s->host_features, VIRTIO_BLK_F_DISCARD)) {
+        virtio_stl_p(vdev, &blkcfg.max_discard_sectors,
+                     s->conf.max_discard_sectors);
+        virtio_stl_p(vdev, &blkcfg.discard_sector_alignment,
+                     blk_size >> BDRV_SECTOR_BITS);
+        /*
+         * We support only one segment per request since multiple segments
+         * are not widely used and there are no userspace APIs that allow
+         * applications to submit multiple segments in a single call.
+         */
+        virtio_stl_p(vdev, &blkcfg.max_discard_seg, 1);
+    }
+    if (virtio_has_feature(s->host_features, VIRTIO_BLK_F_WRITE_ZEROES)) {
+        virtio_stl_p(vdev, &blkcfg.max_write_zeroes_sectors,
+                     s->conf.max_write_zeroes_sectors);
+        blkcfg.write_zeroes_may_unmap = 1;
+        virtio_stl_p(vdev, &blkcfg.max_write_zeroes_seg, 1);
+    }
     memcpy(config, &blkcfg, sizeof(struct virtio_blk_config));
 }
 
@@ -954,6 +1115,25 @@ static void virtio_blk_device_realize(DeviceState *dev, Error **errp)
         return;
     }
 
+    if (virtio_has_feature(s->host_features, VIRTIO_BLK_F_DISCARD) &&
+        (!conf->max_discard_sectors ||
+         conf->max_discard_sectors > BDRV_REQUEST_MAX_SECTORS)) {
+        error_setg(errp, "invalid max-discard-sectors property (%" PRIu32 ")"
+                   ", must be between 1 and %d",
+                   conf->max_discard_sectors, (int)BDRV_REQUEST_MAX_SECTORS);
+        return;
+    }
+
+    if (virtio_has_feature(s->host_features, VIRTIO_BLK_F_WRITE_ZEROES) &&
+        (!conf->max_write_zeroes_sectors ||
+         conf->max_write_zeroes_sectors > BDRV_REQUEST_MAX_SECTORS)) {
+        error_setg(errp, "invalid max-write-zeroes-sectors property (%" PRIu32
+                   "), must be between 1 and %d",
+                   conf->max_write_zeroes_sectors,
+                   (int)BDRV_REQUEST_MAX_SECTORS);
+        return;
+    }
+
     virtio_init(vdev, "virtio-blk", VIRTIO_ID_BLOCK,
                 sizeof(struct virtio_blk_config));
 
@@ -1030,6 +1210,10 @@ static Property virtio_blk_properties[] = {
                       VIRTIO_BLK_F_DISCARD, true),
     DEFINE_PROP_BIT64("write-zeroes", VirtIOBlock, host_features,
                       VIRTIO_BLK_F_WRITE_ZEROES, true),
+    DEFINE_PROP_UINT32("max-discard-sectors", VirtIOBlock,
+                       conf.max_discard_sectors, BDRV_REQUEST_MAX_SECTORS),
+    DEFINE_PROP_UINT32("max-write-zeroes-sectors", VirtIOBlock,
+                       conf.max_write_zeroes_sectors, BDRV_REQUEST_MAX_SECTORS),
     DEFINE_PROP_END_OF_LIST(),
 };
 
-- 
2.20.1

[Qemu-devel] [RFC PULL 5/6] tests/virtio-blk: change assert on data_size in virtio_blk_request()

[Stefan Hajnoczi]

From: Stefano Garzarella <sgarzare@redhat.com>

The size of data in the virtio_blk_request must be a multiple
of 512 bytes for IN and OUT requests, or a multiple of the size
of struct virtio_blk_discard_write_zeroes for DISCARD and
WRITE_ZEROES requests.

Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Pankaj Gupta <pagupta@redhat.com>
Message-id: 20190208134950.187665-6-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 tests/virtio-blk-test.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/tests/virtio-blk-test.c b/tests/virtio-blk-test.c
index 04c608764b..0739498da7 100644
--- a/tests/virtio-blk-test.c
+++ b/tests/virtio-blk-test.c
@@ -144,7 +144,20 @@ static uint64_t virtio_blk_request(QGuestAllocator *alloc, QVirtioDevice *d,
     uint64_t addr;
     uint8_t status = 0xFF;
 
-    g_assert_cmpuint(data_size % 512, ==, 0);
+    switch (req->type) {
+    case VIRTIO_BLK_T_IN:
+    case VIRTIO_BLK_T_OUT:
+        g_assert_cmpuint(data_size % 512, ==, 0);
+        break;
+    case VIRTIO_BLK_T_DISCARD:
+    case VIRTIO_BLK_T_WRITE_ZEROES:
+        g_assert_cmpuint(data_size %
+                         sizeof(struct virtio_blk_discard_write_zeroes), ==, 0);
+        break;
+    default:
+        g_assert_cmpuint(data_size, ==, 0);
+    }
+
     addr = guest_alloc(alloc, sizeof(*req) + data_size);
 
     virtio_blk_fix_request(d, req);
-- 
2.20.1

[Qemu-devel] [RFC PULL 6/6] tests/virtio-blk: add test for WRITE_ZEROES command

[Stefan Hajnoczi]

From: Stefano Garzarella <sgarzare@redhat.com>

If the WRITE_ZEROES feature is enabled, we check this command
in the test_basic().

Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Pankaj Gupta <pagupta@redhat.com>
Message-id: 20190208134950.187665-7-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 tests/virtio-blk-test.c | 60 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

diff --git a/tests/virtio-blk-test.c b/tests/virtio-blk-test.c
index 0739498da7..35bd92dbfc 100644
--- a/tests/virtio-blk-test.c
+++ b/tests/virtio-blk-test.c
@@ -244,6 +244,66 @@ static void test_basic(QVirtioDevice *dev, QGuestAllocator *alloc,
 
     guest_free(alloc, req_addr);
 
+    if (features & (1u << VIRTIO_BLK_F_WRITE_ZEROES)) {
+        struct virtio_blk_discard_write_zeroes dwz_hdr;
+        void *expected;
+
+        /*
+         * WRITE_ZEROES request on the same sector of previous test where
+         * we wrote "TEST".
+         */
+        req.type = VIRTIO_BLK_T_WRITE_ZEROES;
+        req.data = (char *) &dwz_hdr;
+        dwz_hdr.sector = 0;
+        dwz_hdr.num_sectors = 1;
+        dwz_hdr.flags = 0;
+
+        req_addr = virtio_blk_request(alloc, dev, &req, sizeof(dwz_hdr));
+
+        free_head = qvirtqueue_add(vq, req_addr, 16, false, true);
+        qvirtqueue_add(vq, req_addr + 16, sizeof(dwz_hdr), false, true);
+        qvirtqueue_add(vq, req_addr + 16 + sizeof(dwz_hdr), 1, true, false);
+
+        qvirtqueue_kick(dev, vq, free_head);
+
+        qvirtio_wait_used_elem(dev, vq, free_head, NULL,
+                               QVIRTIO_BLK_TIMEOUT_US);
+        status = readb(req_addr + 16 + sizeof(dwz_hdr));
+        g_assert_cmpint(status, ==, 0);
+
+        guest_free(alloc, req_addr);
+
+        /* Read request to check if the sector contains all zeroes */
+        req.type = VIRTIO_BLK_T_IN;
+        req.ioprio = 1;
+        req.sector = 0;
+        req.data = g_malloc0(512);
+
+        req_addr = virtio_blk_request(alloc, dev, &req, 512);
+
+        g_free(req.data);
+
+        free_head = qvirtqueue_add(vq, req_addr, 16, false, true);
+        qvirtqueue_add(vq, req_addr + 16, 512, true, true);
+        qvirtqueue_add(vq, req_addr + 528, 1, true, false);
+
+        qvirtqueue_kick(dev, vq, free_head);
+
+        qvirtio_wait_used_elem(dev, vq, free_head, NULL,
+                               QVIRTIO_BLK_TIMEOUT_US);
+        status = readb(req_addr + 528);
+        g_assert_cmpint(status, ==, 0);
+
+        data = g_malloc(512);
+        expected = g_malloc0(512);
+        memread(req_addr + 16, data, 512);
+        g_assert_cmpmem(data, 512, expected, 512);
+        g_free(expected);
+        g_free(data);
+
+        guest_free(alloc, req_addr);
+    }
+
     if (features & (1u << VIRTIO_F_ANY_LAYOUT)) {
         /* Write and read with 2 descriptor layout */
         /* Write request */
-- 
2.20.1

[Qemu-devel] [RFC PULL 2/6] virtio-blk: add host_features field in VirtIOBlock

[Stefan Hajnoczi]

From: Stefano Garzarella <sgarzare@redhat.com>

Since configurable features for virtio-blk are growing, this patch
adds host_features field in the struct VirtIOBlock. (as in virtio-net)
In this way, we can avoid to add new fields for new properties and
we can directly set VIRTIO_BLK_F* flags in the host_features.

We update "config-wce" and "scsi" property definition to use the new
host_features field without change the behaviour.

Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Pankaj Gupta <pagupta@redhat.com>
Message-id: 20190208134950.187665-3-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 include/hw/virtio/virtio-blk.h |  3 +--
 hw/block/virtio-blk.c          | 16 +++++++++-------
 2 files changed, 10 insertions(+), 9 deletions(-)

diff --git a/include/hw/virtio/virtio-blk.h b/include/hw/virtio/virtio-blk.h
index 5117431d96..f7345b0511 100644
--- a/include/hw/virtio/virtio-blk.h
+++ b/include/hw/virtio/virtio-blk.h
@@ -35,8 +35,6 @@ struct VirtIOBlkConf
     BlockConf conf;
     IOThread *iothread;
     char *serial;
-    uint32_t scsi;
-    uint32_t config_wce;
     uint32_t request_merging;
     uint16_t num_queues;
     uint16_t queue_size;
@@ -57,6 +55,7 @@ typedef struct VirtIOBlock {
     bool dataplane_disabled;
     bool dataplane_started;
     struct VirtIOBlockDataPlane *dataplane;
+    uint64_t host_features;
 } VirtIOBlock;
 
 typedef struct VirtIOBlockReq {
diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c
index b2bb129efa..938273c63c 100644
--- a/hw/block/virtio-blk.c
+++ b/hw/block/virtio-blk.c
@@ -242,7 +242,7 @@ static int virtio_blk_handle_scsi_req(VirtIOBlockReq *req)
      */
     scsi = (void *)elem->in_sg[elem->in_num - 2].iov_base;
 
-    if (!blk->conf.scsi) {
+    if (!virtio_has_feature(blk->host_features, VIRTIO_BLK_F_SCSI)) {
         status = VIRTIO_BLK_S_UNSUPP;
         goto fail;
     }
@@ -783,12 +783,15 @@ static uint64_t virtio_blk_get_features(VirtIODevice *vdev, uint64_t features,
 {
     VirtIOBlock *s = VIRTIO_BLK(vdev);
 
+    /* Firstly sync all virtio-blk possible supported features */
+    features |= s->host_features;
+
     virtio_add_feature(&features, VIRTIO_BLK_F_SEG_MAX);
     virtio_add_feature(&features, VIRTIO_BLK_F_GEOMETRY);
     virtio_add_feature(&features, VIRTIO_BLK_F_TOPOLOGY);
     virtio_add_feature(&features, VIRTIO_BLK_F_BLK_SIZE);
     if (virtio_has_feature(features, VIRTIO_F_VERSION_1)) {
-        if (s->conf.scsi) {
+        if (virtio_has_feature(s->host_features, VIRTIO_BLK_F_SCSI)) {
             error_setg(errp, "Please set scsi=off for virtio-blk devices in order to use virtio 1.0");
             return 0;
         }
@@ -797,9 +800,6 @@ static uint64_t virtio_blk_get_features(VirtIODevice *vdev, uint64_t features,
         virtio_add_feature(&features, VIRTIO_BLK_F_SCSI);
     }
 
-    if (s->conf.config_wce) {
-        virtio_add_feature(&features, VIRTIO_BLK_F_CONFIG_WCE);
-    }
     if (blk_enable_write_cache(s->blk)) {
         virtio_add_feature(&features, VIRTIO_BLK_F_WCE);
     }
@@ -1014,9 +1014,11 @@ static Property virtio_blk_properties[] = {
     DEFINE_BLOCK_ERROR_PROPERTIES(VirtIOBlock, conf.conf),
     DEFINE_BLOCK_CHS_PROPERTIES(VirtIOBlock, conf.conf),
     DEFINE_PROP_STRING("serial", VirtIOBlock, conf.serial),
-    DEFINE_PROP_BIT("config-wce", VirtIOBlock, conf.config_wce, 0, true),
+    DEFINE_PROP_BIT64("config-wce", VirtIOBlock, host_features,
+                      VIRTIO_BLK_F_CONFIG_WCE, true),
 #ifdef __linux__
-    DEFINE_PROP_BIT("scsi", VirtIOBlock, conf.scsi, 0, false),
+    DEFINE_PROP_BIT64("scsi", VirtIOBlock, host_features,
+                      VIRTIO_BLK_F_SCSI, false),
 #endif
     DEFINE_PROP_BIT("request-merging", VirtIOBlock, conf.request_merging, 0,
                     true),
-- 
2.20.1