From: Faiz Abbas <faiz_abbas@ti.com> To: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-mmc@vger.kernel.org>, <linux-omap@vger.kernel.org> Cc: <ulf.hansson@linaro.org>, <robh+dt@kernel.org>, <mark.rutland@arm.com>, <adrian.hunter@intel.com>, <kishon@ti.com>, <zhang.chunyan@linaro.org>, <faiz_abbas@ti.com> Subject: [PATCH v2 5/8] mmc: sdhci: Add quirk for disabling DTO during erase command Date: Sat, 16 Feb 2019 00:50:30 +0530 [thread overview] Message-ID: <20190215192033.24203-6-faiz_abbas@ti.com> (raw) In-Reply-To: <20190215192033.24203-1-faiz_abbas@ti.com> Some controllers might prematurely issue a data timeout during an erase command. Add a quirk to disable the interrupt when an erase command is issued. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> --- drivers/mmc/host/sdhci.c | 5 +++++ drivers/mmc/host/sdhci.h | 2 ++ 2 files changed, 7 insertions(+) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 2f5f64efad16..608f7306742c 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1522,6 +1522,11 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) /* Initially, a command has no error */ cmd->error = 0; + if (cmd->opcode == MMC_ERASE && + (host->quirks2 & SDHCI_QUIRK2_DISABLE_DTO_FOR_ERASE)) { + sdhci_set_data_timeout_irq(host, false); + } + if ((host->quirks2 & SDHCI_QUIRK2_STOP_WITH_TC) && cmd->opcode == MMC_STOP_TRANSMISSION) cmd->flags |= MMC_RSP_BUSY; diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 6ff3e29791ee..60282721f827 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -479,6 +479,8 @@ struct sdhci_host { * block count. */ #define SDHCI_QUIRK2_USE_32BIT_BLK_CNT (1<<18) +/* Controller needs to disable DTO for erase command */ +#define SDHCI_QUIRK2_DISABLE_DTO_FOR_ERASE (1<<19) int irq; /* Device IRQ */ void __iomem *ioaddr; /* Mapped address */ -- 2.19.2
WARNING: multiple messages have this Message-ID (diff)
From: Faiz Abbas <faiz_abbas@ti.com> To: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-mmc@vger.kernel.org, linux-omap@vger.kernel.org Cc: ulf.hansson@linaro.org, robh+dt@kernel.org, mark.rutland@arm.com, adrian.hunter@intel.com, kishon@ti.com, zhang.chunyan@linaro.org, faiz_abbas@ti.com Subject: [PATCH v2 5/8] mmc: sdhci: Add quirk for disabling DTO during erase command Date: Sat, 16 Feb 2019 00:50:30 +0530 [thread overview] Message-ID: <20190215192033.24203-6-faiz_abbas@ti.com> (raw) In-Reply-To: <20190215192033.24203-1-faiz_abbas@ti.com> Some controllers might prematurely issue a data timeout during an erase command. Add a quirk to disable the interrupt when an erase command is issued. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> --- drivers/mmc/host/sdhci.c | 5 +++++ drivers/mmc/host/sdhci.h | 2 ++ 2 files changed, 7 insertions(+) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 2f5f64efad16..608f7306742c 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1522,6 +1522,11 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) /* Initially, a command has no error */ cmd->error = 0; + if (cmd->opcode == MMC_ERASE && + (host->quirks2 & SDHCI_QUIRK2_DISABLE_DTO_FOR_ERASE)) { + sdhci_set_data_timeout_irq(host, false); + } + if ((host->quirks2 & SDHCI_QUIRK2_STOP_WITH_TC) && cmd->opcode == MMC_STOP_TRANSMISSION) cmd->flags |= MMC_RSP_BUSY; diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 6ff3e29791ee..60282721f827 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -479,6 +479,8 @@ struct sdhci_host { * block count. */ #define SDHCI_QUIRK2_USE_32BIT_BLK_CNT (1<<18) +/* Controller needs to disable DTO for erase command */ +#define SDHCI_QUIRK2_DISABLE_DTO_FOR_ERASE (1<<19) int irq; /* Device IRQ */ void __iomem *ioaddr; /* Mapped address */ -- 2.19.2
next prev parent reply other threads:[~2019-02-15 19:18 UTC|newest] Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-02-15 19:20 [PATCH v2 0/8] Port am335 and am437 devices to sdhci-omap Faiz Abbas 2019-02-15 19:20 ` Faiz Abbas 2019-02-15 19:20 ` [PATCH v2 1/8] mmc: sdhci: Get rid of finish_tasklet Faiz Abbas 2019-02-15 19:20 ` Faiz Abbas 2019-02-25 8:17 ` Adrian Hunter 2019-03-06 10:00 ` Faiz Abbas 2019-03-06 10:00 ` Faiz Abbas 2019-03-08 13:36 ` Adrian Hunter 2019-03-12 17:30 ` Rizvi, Mohammad Faiz Abbas 2019-03-12 17:30 ` Rizvi, Mohammad Faiz Abbas 2019-03-14 11:15 ` Grygorii Strashko 2019-03-14 11:15 ` Grygorii Strashko 2019-03-14 11:41 ` Faiz Abbas 2019-03-14 11:41 ` Faiz Abbas 2019-03-14 11:40 ` Arnd Bergmann 2019-03-18 9:33 ` Ulf Hansson 2019-03-26 7:33 ` Adrian Hunter 2019-04-02 7:59 ` Faiz Abbas 2019-04-02 13:12 ` Adrian Hunter 2019-02-15 19:20 ` [PATCH v2 2/8] mmc: sdhci: add support for using external DMA devices Faiz Abbas 2019-02-15 19:20 ` Faiz Abbas 2019-02-15 19:20 ` [PATCH v2 3/8] dt-bindings: sdhci-omap: Add properties for using external dma Faiz Abbas 2019-02-15 19:20 ` Faiz Abbas 2019-02-15 20:07 ` Tony Lindgren 2019-02-18 13:41 ` Faiz Abbas 2019-02-18 13:41 ` Faiz Abbas 2019-02-18 16:20 ` Tony Lindgren 2019-02-18 16:28 ` Tony Lindgren 2019-02-18 20:12 ` Rob Herring 2019-02-19 13:32 ` Faiz Abbas 2019-02-19 13:32 ` Faiz Abbas 2019-02-15 19:20 ` [PATCH v2 4/8] mmc: sdhci-omap: Add " Faiz Abbas 2019-02-15 19:20 ` Faiz Abbas 2019-02-15 19:20 ` Faiz Abbas [this message] 2019-02-15 19:20 ` [PATCH v2 5/8] mmc: sdhci: Add quirk for disabling DTO during erase command Faiz Abbas 2019-02-15 19:20 ` [PATCH v2 6/8] mmc: sdhci-omap: Add DISABLE_DTO_FOR_ERASE Quirk Faiz Abbas 2019-02-15 19:20 ` Faiz Abbas 2019-02-15 19:20 ` [PATCH v2 7/8] dt-bindings: sdhci-omap: Add am335x and am437x specific bindings Faiz Abbas 2019-02-15 19:20 ` Faiz Abbas 2019-02-15 19:20 ` [PATCH v2 8/8] mmc: sdhci-omap: Add am335x and am437x specific compatibles Faiz Abbas 2019-02-15 19:20 ` Faiz Abbas 2019-02-15 20:02 ` [PATCH v2 0/8] Port am335 and am437 devices to sdhci-omap Tony Lindgren 2019-02-18 13:49 ` Faiz Abbas 2019-02-18 13:49 ` Faiz Abbas 2019-02-18 16:25 ` Tony Lindgren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190215192033.24203-6-faiz_abbas@ti.com \ --to=faiz_abbas@ti.com \ --cc=adrian.hunter@intel.com \ --cc=devicetree@vger.kernel.org \ --cc=kishon@ti.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mmc@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ --cc=ulf.hansson@linaro.org \ --cc=zhang.chunyan@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.