[PATCH] Document: dt: binding: imx: Fix PAD_CTL_DSE_X*

[PATCH] Document: dt: binding: imx: Fix PAD_CTL_DSE_X*

[Christina Quast]

In the iMX7d datasheet, the PAD_CTL_DSE_X* values are different from
the documentation.

Signed-off-by: Christina Quast <cquast@hanoverdisplays.com>
---
 .../devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt       | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
index 6666277c3acb..8ac1d0851a0f 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
@@ -48,9 +48,9 @@ PAD_CTL_HYS                     (1 << 3)
 PAD_CTL_SRE_SLOW                (1 << 2)
 PAD_CTL_SRE_FAST                (0 << 2)
 PAD_CTL_DSE_X1                  (0 << 0)
-PAD_CTL_DSE_X2                  (1 << 0)
-PAD_CTL_DSE_X3                  (2 << 0)
-PAD_CTL_DSE_X4                  (3 << 0)
+PAD_CTL_DSE_X4                  (1 << 0)
+PAD_CTL_DSE_X2                  (2 << 0)
+PAD_CTL_DSE_X6                  (3 << 0)
 
 Examples:
 While iomuxc-lpsr is intended to be used by dedicated peripherals to take
-- 
2.20.1




 
Please consider the environment before printing this email
 

 
 
 
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited.
If you received this in error, please contact the sender or postmaster (postmaster@hanoverdisplays.com) and delete the material from any computer.
Although we routinely screen for viruses, addressees should check this e-mail and any attachment for viruses. We make no warranty as to absence of viruses in this e-mail or any attachments.
Our Company's email policy is to permit incidental personal use. If this email is of a personal nature, it must not be relied upon as expressing the views or opinions of the company.

[PATCH] Document: dt: binding: imx: Fix PAD_CTL_DSE_X*

[Christina Quast]

In the iMX7d datasheet, the PAD_CTL_DSE_X* values are different from
the documentation.

Signed-off-by: Christina Quast <cquast@hanoverdisplays.com>
---
 .../devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt       | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
index 6666277c3acb..8ac1d0851a0f 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
@@ -48,9 +48,9 @@ PAD_CTL_HYS                     (1 << 3)
 PAD_CTL_SRE_SLOW                (1 << 2)
 PAD_CTL_SRE_FAST                (0 << 2)
 PAD_CTL_DSE_X1                  (0 << 0)
-PAD_CTL_DSE_X2                  (1 << 0)
-PAD_CTL_DSE_X3                  (2 << 0)
-PAD_CTL_DSE_X4                  (3 << 0)
+PAD_CTL_DSE_X4                  (1 << 0)
+PAD_CTL_DSE_X2                  (2 << 0)
+PAD_CTL_DSE_X6                  (3 << 0)
 
 Examples:
 While iomuxc-lpsr is intended to be used by dedicated peripherals to take
-- 
2.20.1




 
Please consider the environment before printing this email
 

 
 
 
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited.
If you received this in error, please contact the sender or postmaster (postmaster@hanoverdisplays.com) and delete the material from any computer.
Although we routinely screen for viruses, addressees should check this e-mail and any attachment for viruses. We make no warranty as to absence of viruses in this e-mail or any attachments.
Our Company's email policy is to permit incidental personal use. If this email is of a personal nature, it must not be relied upon as expressing the views or opinions of the company.

RE: [PATCH] Document: dt: binding: imx: Fix PAD_CTL_DSE_X*

[Aisheng Dong]

> From: Christina Quast [mailto:cquast@hanoverdisplays.com]
> Sent: Saturday, February 23, 2019 1:01 AM
> 
> In the iMX7d datasheet, the PAD_CTL_DSE_X* values are different from the
> documentation.
> 

It's a doc problem.
Latest RM seems got updated.

As here it's a reference definition in binding doc and device tree actually does not
use it (IMX Pinctrl use raw data to set pad configuration). So it won't cause any
compatibility issue to me.

Please update the patch title to:
dt-bindings: pinctrl: imx7d: xxxxx

Otherwise:
Ack-by: Dong Aisheng <aisheng.dong@nxp.com>

Regards
Dong Aisheng

> Signed-off-by: Christina Quast <cquast@hanoverdisplays.com>
> ---
>  .../devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt       | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
> b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
> index 6666277c3acb..8ac1d0851a0f 100644
> --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
> @@ -48,9 +48,9 @@ PAD_CTL_HYS                     (1 << 3)
>  PAD_CTL_SRE_SLOW                (1 << 2)
>  PAD_CTL_SRE_FAST                (0 << 2)
>  PAD_CTL_DSE_X1                  (0 << 0)
> -PAD_CTL_DSE_X2                  (1 << 0)
> -PAD_CTL_DSE_X3                  (2 << 0)
> -PAD_CTL_DSE_X4                  (3 << 0)
> +PAD_CTL_DSE_X4                  (1 << 0)
> +PAD_CTL_DSE_X2                  (2 << 0)
> +PAD_CTL_DSE_X6                  (3 << 0)
> 


>  Examples:
>  While iomuxc-lpsr is intended to be used by dedicated peripherals to take
> --
> 2.20.1
> 
> 
> 
> 
> 
> Please consider the environment before printing this email
> 
> 
> 
> 
> 
> The information transmitted is intended only for the person or entity to which
> it is addressed and may contain confidential and/or privileged material. Any
> review, retransmission, dissemination or other use of, or taking of any action in
> reliance upon, this information by persons or entities other than the intended
> recipient is prohibited.
> If you received this in error, please contact the sender or postmaster
> (postmaster@hanoverdisplays.com) and delete the material from any
> computer.
> Although we routinely screen for viruses, addressees should check this e-mail
> and any attachment for viruses. We make no warranty as to absence of viruses
> in this e-mail or any attachments.
> Our Company's email policy is to permit incidental personal use. If this email is
> of a personal nature, it must not be relied upon as expressing the views or
> opinions of the company.

Re: [PATCH] Document: dt: binding: imx: Fix PAD_CTL_DSE_X*

[Stefan Agner]

On 26.02.2019 13:21, Aisheng Dong wrote:
>> From: Christina Quast [mailto:cquast@hanoverdisplays.com]
>> Sent: Saturday, February 23, 2019 1:01 AM
>>
>> In the iMX7d datasheet, the PAD_CTL_DSE_X* values are different from the
>> documentation.
>>
> 
> It's a doc problem.
> Latest RM seems got updated.
> 
> As here it's a reference definition in binding doc and device tree
> actually does not
> use it (IMX Pinctrl use raw data to set pad configuration). So it
> won't cause any
> compatibility issue to me.
> 
> Please update the patch title to:
> dt-bindings: pinctrl: imx7d: xxxxx
> 
> Otherwise:
> Ack-by: Dong Aisheng <aisheng.dong@nxp.com>

Btw, I saw that imx7d-sdb.dts (and probably other i.MX 7 boards too) use
three different settings for usdhc pinctrl: 0x59, 0x5a and 0x5b (for
default, 100MHz and 200MHz respectively). One would expect that higher
frequency use higher driver strength (and this is the case for i.MX 6).
But with this new/corrected pad values this means we use x4, x2 and x6
for default, 100MHz and 200MHz respectively. This hardly seems right..?
Probably needs fixing too?

--
Stefan


> 
> Regards
> Dong Aisheng
> 
>> Signed-off-by: Christina Quast <cquast@hanoverdisplays.com>
>> ---
>>  .../devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt       | 6 +++---
>>  1 file changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
>> b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
>> index 6666277c3acb..8ac1d0851a0f 100644
>> --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
>> +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
>> @@ -48,9 +48,9 @@ PAD_CTL_HYS                     (1 << 3)
>>  PAD_CTL_SRE_SLOW                (1 << 2)
>>  PAD_CTL_SRE_FAST                (0 << 2)
>>  PAD_CTL_DSE_X1                  (0 << 0)
>> -PAD_CTL_DSE_X2                  (1 << 0)
>> -PAD_CTL_DSE_X3                  (2 << 0)
>> -PAD_CTL_DSE_X4                  (3 << 0)
>> +PAD_CTL_DSE_X4                  (1 << 0)
>> +PAD_CTL_DSE_X2                  (2 << 0)
>> +PAD_CTL_DSE_X6                  (3 << 0)
>>
> 
> 
>>  Examples:
>>  While iomuxc-lpsr is intended to be used by dedicated peripherals to take
>> --
>> 2.20.1
>>
>>
>>
>>
>>
>> Please consider the environment before printing this email
>>
>>
>>
>>
>>
>> The information transmitted is intended only for the person or entity to which
>> it is addressed and may contain confidential and/or privileged material. Any
>> review, retransmission, dissemination or other use of, or taking of any action in
>> reliance upon, this information by persons or entities other than the intended
>> recipient is prohibited.
>> If you received this in error, please contact the sender or postmaster
>> (postmaster@hanoverdisplays.com) and delete the material from any
>> computer.
>> Although we routinely screen for viruses, addressees should check this e-mail
>> and any attachment for viruses. We make no warranty as to absence of viruses
>> in this e-mail or any attachments.
>> Our Company's email policy is to permit incidental personal use. If this email is
>> of a personal nature, it must not be relied upon as expressing the views or
>> opinions of the company.

RE: [PATCH] Document: dt: binding: imx: Fix PAD_CTL_DSE_X*

[Aisheng Dong]

+ Haibo

> From: Stefan Agner [mailto:stefan@agner.ch]
> Sent: Tuesday, February 26, 2019 9:22 PM
> 
> On 26.02.2019 13:21, Aisheng Dong wrote:
> >> From: Christina Quast [mailto:cquast@hanoverdisplays.com]
> >> Sent: Saturday, February 23, 2019 1:01 AM
> >>
> >> In the iMX7d datasheet, the PAD_CTL_DSE_X* values are different from
> >> the documentation.
> >>
> >
> > It's a doc problem.
> > Latest RM seems got updated.
> >
> > As here it's a reference definition in binding doc and device tree
> > actually does not use it (IMX Pinctrl use raw data to set pad
> > configuration). So it won't cause any compatibility issue to me.
> >
> > Please update the patch title to:
> > dt-bindings: pinctrl: imx7d: xxxxx
> >
> > Otherwise:
> > Ack-by: Dong Aisheng <aisheng.dong@nxp.com>
> 
> Btw, I saw that imx7d-sdb.dts (and probably other i.MX 7 boards too) use three
> different settings for usdhc pinctrl: 0x59, 0x5a and 0x5b (for default, 100MHz
> and 200MHz respectively). One would expect that higher frequency use higher
> driver strength (and this is the case for i.MX 6).
> But with this new/corrected pad values this means we use x4, x2 and x6 for
> default, 100MHz and 200MHz respectively. This hardly seems right..?
> Probably needs fixing too?
> 

Yes, that's true.
Especially 100Mhz setting should be updated.

Haibo,
Can you please help double check if X2 for 50Mhz and X4 for 100Mhz can work stably
on MX7D SDB?
If yes, we'd like to update the pad setting according to new RM version.

Regards
Dong Aisheng

> --
> Stefan
> 
> 
> >
> > Regards
> > Dong Aisheng
> >
> >> Signed-off-by: Christina Quast <cquast@hanoverdisplays.com>
> >> ---
> >>  .../devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt       | 6 +++---
> >>  1 file changed, 3 insertions(+), 3 deletions(-)
> >>
> >> diff --git
> >> a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
> >> b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
> >> index 6666277c3acb..8ac1d0851a0f 100644
> >> --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
> >> +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
> >> @@ -48,9 +48,9 @@ PAD_CTL_HYS                     (1 << 3)
> >>  PAD_CTL_SRE_SLOW                (1 << 2)
> >>  PAD_CTL_SRE_FAST                (0 << 2)
> >>  PAD_CTL_DSE_X1                  (0 << 0)
> >> -PAD_CTL_DSE_X2                  (1 << 0)
> >> -PAD_CTL_DSE_X3                  (2 << 0)
> >> -PAD_CTL_DSE_X4                  (3 << 0)
> >> +PAD_CTL_DSE_X4                  (1 << 0)
> >> +PAD_CTL_DSE_X2                  (2 << 0)
> >> +PAD_CTL_DSE_X6                  (3 << 0)
> >>
> >
> >
> >>  Examples:
> >>  While iomuxc-lpsr is intended to be used by dedicated peripherals to
> >> take
> >> --
> >> 2.20.1
> >>
> >>
> >>
> >>
> >>
> >> Please consider the environment before printing this email
> >>
> >>
> >>
> >>
> >>
> >> The information transmitted is intended only for the person or entity
> >> to which it is addressed and may contain confidential and/or
> >> privileged material. Any review, retransmission, dissemination or
> >> other use of, or taking of any action in reliance upon, this
> >> information by persons or entities other than the intended recipient is
> prohibited.
> >> If you received this in error, please contact the sender or
> >> postmaster
> >> (postmaster@hanoverdisplays.com) and delete the material from any
> >> computer.
> >> Although we routinely screen for viruses, addressees should check
> >> this e-mail and any attachment for viruses. We make no warranty as to
> >> absence of viruses in this e-mail or any attachments.
> >> Our Company's email policy is to permit incidental personal use. If
> >> this email is of a personal nature, it must not be relied upon as
> >> expressing the views or opinions of the company.

RE: [PATCH] Document: dt: binding: imx: Fix PAD_CTL_DSE_X*

[Aisheng Dong]

+ Haibo

> From: Stefan Agner [mailto:stefan@agner.ch]
> Sent: Tuesday, February 26, 2019 9:22 PM
> 
> On 26.02.2019 13:21, Aisheng Dong wrote:
> >> From: Christina Quast [mailto:cquast@hanoverdisplays.com]
> >> Sent: Saturday, February 23, 2019 1:01 AM
> >>
> >> In the iMX7d datasheet, the PAD_CTL_DSE_X* values are different from
> >> the documentation.
> >>
> >
> > It's a doc problem.
> > Latest RM seems got updated.
> >
> > As here it's a reference definition in binding doc and device tree
> > actually does not use it (IMX Pinctrl use raw data to set pad
> > configuration). So it won't cause any compatibility issue to me.
> >
> > Please update the patch title to:
> > dt-bindings: pinctrl: imx7d: xxxxx
> >
> > Otherwise:
> > Ack-by: Dong Aisheng <aisheng.dong@nxp.com>
> 
> Btw, I saw that imx7d-sdb.dts (and probably other i.MX 7 boards too) use three
> different settings for usdhc pinctrl: 0x59, 0x5a and 0x5b (for default, 100MHz
> and 200MHz respectively). One would expect that higher frequency use higher
> driver strength (and this is the case for i.MX 6).
> But with this new/corrected pad values this means we use x4, x2 and x6 for
> default, 100MHz and 200MHz respectively. This hardly seems right..?
> Probably needs fixing too?
> 

Yes, that's true.
Especially 100Mhz setting should be updated.

Haibo,
Can you please help double check if X2 for 50Mhz and X4 for 100Mhz can work stably
on MX7D SDB?
If yes, we'd like to update the pad setting according to new RM version.

Regards
Dong Aisheng

> --
> Stefan
> 
> 
> >
> > Regards
> > Dong Aisheng
> >
> >> Signed-off-by: Christina Quast <cquast@hanoverdisplays.com>
> >> ---
> >>  .../devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt       | 6 +++---
> >>  1 file changed, 3 insertions(+), 3 deletions(-)
> >>
> >> diff --git
> >> a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
> >> b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
> >> index 6666277c3acb..8ac1d0851a0f 100644
> >> --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
> >> +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
> >> @@ -48,9 +48,9 @@ PAD_CTL_HYS                     (1 << 3)
> >>  PAD_CTL_SRE_SLOW                (1 << 2)
> >>  PAD_CTL_SRE_FAST                (0 << 2)
> >>  PAD_CTL_DSE_X1                  (0 << 0)
> >> -PAD_CTL_DSE_X2                  (1 << 0)
> >> -PAD_CTL_DSE_X3                  (2 << 0)
> >> -PAD_CTL_DSE_X4                  (3 << 0)
> >> +PAD_CTL_DSE_X4                  (1 << 0)
> >> +PAD_CTL_DSE_X2                  (2 << 0)
> >> +PAD_CTL_DSE_X6                  (3 << 0)
> >>
> >
> >
> >>  Examples:
> >>  While iomuxc-lpsr is intended to be used by dedicated peripherals to
> >> take
> >> --
> >> 2.20.1
> >>
> >>
> >>
> >>
> >>
> >> Please consider the environment before printing this email
> >>
> >>
> >>
> >>
> >>
> >> The information transmitted is intended only for the person or entity
> >> to which it is addressed and may contain confidential and/or
> >> privileged material. Any review, retransmission, dissemination or
> >> other use of, or taking of any action in reliance upon, this
> >> information by persons or entities other than the intended recipient is
> prohibited.
> >> If you received this in error, please contact the sender or
> >> postmaster
> >> (postmaster@hanoverdisplays.com) and delete the material from any
> >> computer.
> >> Although we routinely screen for viruses, addressees should check
> >> this e-mail and any attachment for viruses. We make no warranty as to
> >> absence of viruses in this e-mail or any attachments.
> >> Our Company's email policy is to permit incidental personal use. If
> >> this email is of a personal nature, it must not be relied upon as
> >> expressing the views or opinions of the company.

RE: [PATCH] Document: dt: binding: imx: Fix PAD_CTL_DSE_X*

[BOUGH CHEN]

> -----Original Message-----
> From: Aisheng Dong
> Sent: 2019年3月5日 11:35
> To: Stefan Agner <stefan@agner.ch>; BOUGH CHEN <haibo.chen@nxp.com>
> Cc: Christina Quast <cquast@hanoverdisplays.com>; festevam@gmail.com;
> shawnguo@kernel.org; kernel@pengutronix.de; linus.walleij@linaro.org;
> robh+dt@kernel.org; mark.rutland@arm.com; linux-gpio@vger.kernel.org;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; BOUGH CHEN
> <haibo.chen@nxp.com>
> Subject: RE: [PATCH] Document: dt: binding: imx: Fix PAD_CTL_DSE_X*
> 
> + Haibo
> 
> > From: Stefan Agner [mailto:stefan@agner.ch]
> > Sent: Tuesday, February 26, 2019 9:22 PM
> >
> > On 26.02.2019 13:21, Aisheng Dong wrote:
> > >> From: Christina Quast [mailto:cquast@hanoverdisplays.com]
> > >> Sent: Saturday, February 23, 2019 1:01 AM
> > >>
> > >> In the iMX7d datasheet, the PAD_CTL_DSE_X* values are different
> > >> from the documentation.
> > >>
> > >
> > > It's a doc problem.
> > > Latest RM seems got updated.
> > >
> > > As here it's a reference definition in binding doc and device tree
> > > actually does not use it (IMX Pinctrl use raw data to set pad
> > > configuration). So it won't cause any compatibility issue to me.
> > >
> > > Please update the patch title to:
> > > dt-bindings: pinctrl: imx7d: xxxxx
> > >
> > > Otherwise:
> > > Ack-by: Dong Aisheng <aisheng.dong@nxp.com>
> >
> > Btw, I saw that imx7d-sdb.dts (and probably other i.MX 7 boards too)
> > use three different settings for usdhc pinctrl: 0x59, 0x5a and 0x5b
> > (for default, 100MHz and 200MHz respectively). One would expect that
> > higher frequency use higher driver strength (and this is the case for i.MX 6).
> > But with this new/corrected pad values this means we use x4, x2 and x6
> > for default, 100MHz and 200MHz respectively. This hardly seems right..?
> > Probably needs fixing too?
> >
> 
> Yes, that's true.
> Especially 100Mhz setting should be updated.
> 
> Haibo,
> Can you please help double check if X2 for 50Mhz and X4 for 100Mhz can work
> stably on MX7D SDB?
> If yes, we'd like to update the pad setting according to new RM version.
> 

X2 for high speed and x4 for ddr50/ddr52 can work stable on MX7D SDB.
I think all the 7D related dts need to fix this. Not sure whether 7S need this fix, can you confirm?

Best Regards
Haibo Chen
> Regards
> Dong Aisheng
> 
> > --
> > Stefan
> >
> >
> > >
> > > Regards
> > > Dong Aisheng
> > >
> > >> Signed-off-by: Christina Quast <cquast@hanoverdisplays.com>
> > >> ---
> > >>  .../devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt       | 6 +++---
> > >>  1 file changed, 3 insertions(+), 3 deletions(-)
> > >>
> > >> diff --git
> > >> a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
> > >> b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
> > >> index 6666277c3acb..8ac1d0851a0f 100644
> > >> ---
> > >> a/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
> > >> +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.t
> > >> +++ xt
> > >> @@ -48,9 +48,9 @@ PAD_CTL_HYS                     (1 << 3)
> > >>  PAD_CTL_SRE_SLOW                (1 << 2)
> > >>  PAD_CTL_SRE_FAST                (0 << 2)
> > >>  PAD_CTL_DSE_X1                  (0 << 0)
> > >> -PAD_CTL_DSE_X2                  (1 << 0)
> > >> -PAD_CTL_DSE_X3                  (2 << 0)
> > >> -PAD_CTL_DSE_X4                  (3 << 0)
> > >> +PAD_CTL_DSE_X4                  (1 << 0)
> > >> +PAD_CTL_DSE_X2                  (2 << 0)
> > >> +PAD_CTL_DSE_X6                  (3 << 0)
> > >>
> > >
> > >
> > >>  Examples:
> > >>  While iomuxc-lpsr is intended to be used by dedicated peripherals
> > >> to take
> > >> --
> > >> 2.20.1
> > >>
> > >>
> > >>
> > >>
> > >>
> > >> Please consider the environment before printing this email
> > >>
> > >>
> > >>
> > >>
> > >>
> > >> The information transmitted is intended only for the person or
> > >> entity to which it is addressed and may contain confidential and/or
> > >> privileged material. Any review, retransmission, dissemination or
> > >> other use of, or taking of any action in reliance upon, this
> > >> information by persons or entities other than the intended
> > >> recipient is
> > prohibited.
> > >> If you received this in error, please contact the sender or
> > >> postmaster
> > >> (postmaster@hanoverdisplays.com) and delete the material from any
> > >> computer.
> > >> Although we routinely screen for viruses, addressees should check
> > >> this e-mail and any attachment for viruses. We make no warranty as
> > >> to absence of viruses in this e-mail or any attachments.
> > >> Our Company's email policy is to permit incidental personal use. If
> > >> this email is of a personal nature, it must not be relied upon as
> > >> expressing the views or opinions of the company.

RE: [PATCH] Document: dt: binding: imx: Fix PAD_CTL_DSE_X*

[Aisheng Dong]

[...]

> > > Btw, I saw that imx7d-sdb.dts (and probably other i.MX 7 boards too)
> > > use three different settings for usdhc pinctrl: 0x59, 0x5a and 0x5b
> > > (for default, 100MHz and 200MHz respectively). One would expect that
> > > higher frequency use higher driver strength (and this is the case for i.MX 6).
> > > But with this new/corrected pad values this means we use x4, x2 and
> > > x6 for default, 100MHz and 200MHz respectively. This hardly seems right..?
> > > Probably needs fixing too?
> > >
> >
> > Yes, that's true.
> > Especially 100Mhz setting should be updated.
> >
> > Haibo,
> > Can you please help double check if X2 for 50Mhz and X4 for 100Mhz can
> > work stably on MX7D SDB?
> > If yes, we'd like to update the pad setting according to new RM version.
> >
> 
> X2 for high speed and x4 for ddr50/ddr52 can work stable on MX7D SDB.
> I think all the 7D related dts need to fix this. Not sure whether 7S need this fix,
> can you confirm?
> 

Yes, please make a patch to test board maintainer.

Regards
Dong Aisheng

> Best Regards
> Haibo Chen