[V2] dmaengine: axi-dmac: don't check the number of frames for alignment

[V2] dmaengine: axi-dmac: don't check the number of frames for alignment

[Alexandru Ardelean]

In 2D transfers (for the AXI DMAC), the number of frames (numf) represents
Y_LENGTH, and the length of a frame is X_LENGTH. 2D transfers are useful
for video transfers where screen resolutions ( X * Y ) are typically
aligned for X, but not for Y.

There is no requirement for Y_LENGTH to be aligned to the bus-width (or
anything), and this is also true for AXI DMAC.

Checking the Y_LENGTH for alignment causes false errors when initiating DMA
transfers. This change fixes this by checking only that the Y_LENGTH is
non-zero.

Fixes: 0e3b67b348b8 ("maengine: Add support for the Analog Devices AXI-DMAC DMA controller")
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
 drivers/dma/dma-axi-dmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/dma-axi-dmac.c b/drivers/dma/dma-axi-dmac.c
index ffc0adc2f6ce..2c999113b989 100644
--- a/drivers/dma/dma-axi-dmac.c
+++ b/drivers/dma/dma-axi-dmac.c
@@ -485,7 +485,7 @@ static struct dma_async_tx_descriptor *axi_dmac_prep_interleaved(
 
 	if (chan->hw_2d) {
 		if (!axi_dmac_check_len(chan, xt->sgl[0].size) ||
-		    !axi_dmac_check_len(chan, xt->numf))
+		    xt->numf == 0)
 			return NULL;
 		if (xt->sgl[0].size + dst_icg > chan->max_length ||
 		    xt->sgl[0].size + src_icg > chan->max_length)