From: Samuel Holland <samuel@sholland.org>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>, Bin Liu <b-liu@ti.com>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
linux-sunxi@googlegroups.com,
Samuel Holland <samuel@sholland.org>
Subject: [PATCH] soc: sunxi: Fix missing dependency on REGMAP_MMIO
Date: Thu, 28 Feb 2019 20:20:44 -0600 [thread overview]
Message-ID: <20190301022044.24431-1-samuel@sholland.org> (raw)
When enabling ARCH_SUNXI from allnoconfig, SUNXI_SRAM is enabled, but
not REGMAP_MMIO, so the kernel fails to link with an undefined reference
to __devm_regmap_init_mmio_clk. Select REGMAP_MMIO, as suggested in
drivers/base/regmap/Kconfig.
This creates the following dependency loop:
drivers/of/Kconfig:68: symbol OF_IRQ depends on IRQ_DOMAIN
kernel/irq/Kconfig:63: symbol IRQ_DOMAIN is selected by REGMAP
drivers/base/regmap/Kconfig:7: symbol REGMAP default is visible depending on REGMAP_MMIO
drivers/base/regmap/Kconfig:39: symbol REGMAP_MMIO is selected by SUNXI_SRAM
drivers/soc/sunxi/Kconfig:4: symbol SUNXI_SRAM is selected by USB_MUSB_SUNXI
drivers/usb/musb/Kconfig:63: symbol USB_MUSB_SUNXI depends on GENERIC_PHY
drivers/phy/Kconfig:7: symbol GENERIC_PHY is selected by PHY_BCM_NS_USB3
drivers/phy/broadcom/Kconfig:29: symbol PHY_BCM_NS_USB3 depends on MDIO_BUS
drivers/net/phy/Kconfig:12: symbol MDIO_BUS default is visible depending on PHYLIB
drivers/net/phy/Kconfig:181: symbol PHYLIB is selected by ARC_EMAC_CORE
drivers/net/ethernet/arc/Kconfig:18: symbol ARC_EMAC_CORE is selected by ARC_EMAC
drivers/net/ethernet/arc/Kconfig:24: symbol ARC_EMAC depends on OF_IRQ
To fix the circular dependency, make USB_MUSB_SUNXI select GENERIC_PHY
instead of depending on it. This matches the use of GENERIC_PHY by all
but two other drivers.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
drivers/soc/sunxi/Kconfig | 1 +
drivers/usb/musb/Kconfig | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/soc/sunxi/Kconfig b/drivers/soc/sunxi/Kconfig
index 353b07e40176..e84eb4e59f58 100644
--- a/drivers/soc/sunxi/Kconfig
+++ b/drivers/soc/sunxi/Kconfig
@@ -4,6 +4,7 @@
config SUNXI_SRAM
bool
default ARCH_SUNXI
+ select REGMAP_MMIO
help
Say y here to enable the SRAM controller support. This
device is responsible on mapping the SRAM in the sunXi SoCs
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index ad08895e78f9..c3dae7d5cb6e 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -66,7 +66,7 @@ config USB_MUSB_SUNXI
depends on NOP_USB_XCEIV
depends on PHY_SUN4I_USB
depends on EXTCON
- depends on GENERIC_PHY
+ select GENERIC_PHY
select SUNXI_SRAM
config USB_MUSB_DAVINCI
--
2.19.2
WARNING: multiple messages have this Message-ID (diff)
From: Samuel Holland <samuel@sholland.org>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>, Bin Liu <b-liu@ti.com>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
linux-sunxi@googlegroups.com,
Samuel Holland <samuel@sholland.org>
Subject: soc: sunxi: Fix missing dependency on REGMAP_MMIO
Date: Thu, 28 Feb 2019 20:20:44 -0600 [thread overview]
Message-ID: <20190301022044.24431-1-samuel@sholland.org> (raw)
When enabling ARCH_SUNXI from allnoconfig, SUNXI_SRAM is enabled, but
not REGMAP_MMIO, so the kernel fails to link with an undefined reference
to __devm_regmap_init_mmio_clk. Select REGMAP_MMIO, as suggested in
drivers/base/regmap/Kconfig.
This creates the following dependency loop:
drivers/of/Kconfig:68: symbol OF_IRQ depends on IRQ_DOMAIN
kernel/irq/Kconfig:63: symbol IRQ_DOMAIN is selected by REGMAP
drivers/base/regmap/Kconfig:7: symbol REGMAP default is visible depending on REGMAP_MMIO
drivers/base/regmap/Kconfig:39: symbol REGMAP_MMIO is selected by SUNXI_SRAM
drivers/soc/sunxi/Kconfig:4: symbol SUNXI_SRAM is selected by USB_MUSB_SUNXI
drivers/usb/musb/Kconfig:63: symbol USB_MUSB_SUNXI depends on GENERIC_PHY
drivers/phy/Kconfig:7: symbol GENERIC_PHY is selected by PHY_BCM_NS_USB3
drivers/phy/broadcom/Kconfig:29: symbol PHY_BCM_NS_USB3 depends on MDIO_BUS
drivers/net/phy/Kconfig:12: symbol MDIO_BUS default is visible depending on PHYLIB
drivers/net/phy/Kconfig:181: symbol PHYLIB is selected by ARC_EMAC_CORE
drivers/net/ethernet/arc/Kconfig:18: symbol ARC_EMAC_CORE is selected by ARC_EMAC
drivers/net/ethernet/arc/Kconfig:24: symbol ARC_EMAC depends on OF_IRQ
To fix the circular dependency, make USB_MUSB_SUNXI select GENERIC_PHY
instead of depending on it. This matches the use of GENERIC_PHY by all
but two other drivers.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
drivers/soc/sunxi/Kconfig | 1 +
drivers/usb/musb/Kconfig | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/soc/sunxi/Kconfig b/drivers/soc/sunxi/Kconfig
index 353b07e40176..e84eb4e59f58 100644
--- a/drivers/soc/sunxi/Kconfig
+++ b/drivers/soc/sunxi/Kconfig
@@ -4,6 +4,7 @@
config SUNXI_SRAM
bool
default ARCH_SUNXI
+ select REGMAP_MMIO
help
Say y here to enable the SRAM controller support. This
device is responsible on mapping the SRAM in the sunXi SoCs
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index ad08895e78f9..c3dae7d5cb6e 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -66,7 +66,7 @@ config USB_MUSB_SUNXI
depends on NOP_USB_XCEIV
depends on PHY_SUN4I_USB
depends on EXTCON
- depends on GENERIC_PHY
+ select GENERIC_PHY
select SUNXI_SRAM
config USB_MUSB_DAVINCI
WARNING: multiple messages have this Message-ID (diff)
From: Samuel Holland <samuel@sholland.org>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
Chen-Yu Tsai <wens@csie.org>, Bin Liu <b-liu@ti.com>
Cc: linux-sunxi@googlegroups.com, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Samuel Holland <samuel@sholland.org>
Subject: [PATCH] soc: sunxi: Fix missing dependency on REGMAP_MMIO
Date: Thu, 28 Feb 2019 20:20:44 -0600 [thread overview]
Message-ID: <20190301022044.24431-1-samuel@sholland.org> (raw)
When enabling ARCH_SUNXI from allnoconfig, SUNXI_SRAM is enabled, but
not REGMAP_MMIO, so the kernel fails to link with an undefined reference
to __devm_regmap_init_mmio_clk. Select REGMAP_MMIO, as suggested in
drivers/base/regmap/Kconfig.
This creates the following dependency loop:
drivers/of/Kconfig:68: symbol OF_IRQ depends on IRQ_DOMAIN
kernel/irq/Kconfig:63: symbol IRQ_DOMAIN is selected by REGMAP
drivers/base/regmap/Kconfig:7: symbol REGMAP default is visible depending on REGMAP_MMIO
drivers/base/regmap/Kconfig:39: symbol REGMAP_MMIO is selected by SUNXI_SRAM
drivers/soc/sunxi/Kconfig:4: symbol SUNXI_SRAM is selected by USB_MUSB_SUNXI
drivers/usb/musb/Kconfig:63: symbol USB_MUSB_SUNXI depends on GENERIC_PHY
drivers/phy/Kconfig:7: symbol GENERIC_PHY is selected by PHY_BCM_NS_USB3
drivers/phy/broadcom/Kconfig:29: symbol PHY_BCM_NS_USB3 depends on MDIO_BUS
drivers/net/phy/Kconfig:12: symbol MDIO_BUS default is visible depending on PHYLIB
drivers/net/phy/Kconfig:181: symbol PHYLIB is selected by ARC_EMAC_CORE
drivers/net/ethernet/arc/Kconfig:18: symbol ARC_EMAC_CORE is selected by ARC_EMAC
drivers/net/ethernet/arc/Kconfig:24: symbol ARC_EMAC depends on OF_IRQ
To fix the circular dependency, make USB_MUSB_SUNXI select GENERIC_PHY
instead of depending on it. This matches the use of GENERIC_PHY by all
but two other drivers.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
drivers/soc/sunxi/Kconfig | 1 +
drivers/usb/musb/Kconfig | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/soc/sunxi/Kconfig b/drivers/soc/sunxi/Kconfig
index 353b07e40176..e84eb4e59f58 100644
--- a/drivers/soc/sunxi/Kconfig
+++ b/drivers/soc/sunxi/Kconfig
@@ -4,6 +4,7 @@
config SUNXI_SRAM
bool
default ARCH_SUNXI
+ select REGMAP_MMIO
help
Say y here to enable the SRAM controller support. This
device is responsible on mapping the SRAM in the sunXi SoCs
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index ad08895e78f9..c3dae7d5cb6e 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -66,7 +66,7 @@ config USB_MUSB_SUNXI
depends on NOP_USB_XCEIV
depends on PHY_SUN4I_USB
depends on EXTCON
- depends on GENERIC_PHY
+ select GENERIC_PHY
select SUNXI_SRAM
config USB_MUSB_DAVINCI
--
2.19.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-03-01 2:20 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-01 2:20 Samuel Holland [this message]
2019-03-01 2:20 ` [PATCH] soc: sunxi: Fix missing dependency on REGMAP_MMIO Samuel Holland
2019-03-01 2:20 ` Samuel Holland
2019-03-01 14:43 ` [PATCH] " Maxime Ripard
2019-03-01 14:43 ` Maxime Ripard
2019-03-01 14:43 ` Maxime Ripard
2019-04-01 15:29 ` [PATCH] " Bin Liu
2019-04-01 15:29 ` Bin Liu
2019-04-01 15:29 ` Bin Liu
2019-04-01 22:04 ` [linux-sunxi] Re: [PATCH] " Samuel Holland
2019-04-01 22:04 ` Samuel Holland
2019-04-01 22:04 ` Samuel Holland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190301022044.24431-1-samuel@sholland.org \
--to=samuel@sholland.org \
--cc=b-liu@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux-usb@vger.kernel.org \
--cc=maxime.ripard@bootlin.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.