All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Gleixner <tglx@linutronix.de>
To: speck@linutronix.de
Subject: [patch V6 12/14] MDS basics 12
Date: Fri, 01 Mar 2019 22:47:50 +0100	[thread overview]
Message-ID: <20190301214848.253554490@linutronix.de> (raw)
In-Reply-To: 20190301214738.281554861@linutronix.de

Subject: [patch V6 12/14] x86/speculation/mds: Add mitigation mode VMWERV
From: Thomas Gleixner <tglx@linutronix.de>

In virtualized environments it can happen that the host has the microcode
update which utilizes the VERW instruction to clear CPU buffers, but the
hypervisor is not yet updated to expose the X86_FEATURE_MD_CLEAR CPUID bit
to guests.

Introduce an internal mitigation mode VWWERV which enables the invocation
of the CPU buffer clearing even if X86_FEATURE_MD_CLEAR is not set. If the
system has no updated microcode this results in a pointless execution of
the VERW instruction wasting a few CPU cycles. If the microcode is updated,
but not exposed to a guest then the CPU buffers will be cleared.

That said: Virtual Machines Will Eventually Receive Vaccine

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
V2 -> V3: Rename mode.
---
 Documentation/x86/mds.rst        |   27 +++++++++++++++++++++++++++
 arch/x86/include/asm/processor.h |    1 +
 arch/x86/kernel/cpu/bugs.c       |   18 ++++++++++++------
 3 files changed, 40 insertions(+), 6 deletions(-)

--- a/Documentation/x86/mds.rst
+++ b/Documentation/x86/mds.rst
@@ -93,11 +93,38 @@ enters a C-state.
 The mitigation is invoked on kernel/userspace, hypervisor/guest and C-state
 (idle) transitions.
 
+As a special quirk to address virtualization scenarios where the host has
+the microcode updated, but the hypervisor does not (yet) expose the
+MD_CLEAR CPUID bit to guests, the kernel issues the VERW instruction in the
+hope that it might actually clear the buffers. The state is reflected
+accordingly.
+
 According to current knowledge additional mitigations inside the kernel
 itself are not required because the necessary gadgets to expose the leaked
 data cannot be controlled in a way which allows exploitation from malicious
 user space or VM guests.
 
+Kernel internal mitigation modes
+--------------------------------
+
+ ======= ============================================================
+ off      Mitigation is disabled. Either the CPU is not affected or
+          mds=off is supplied on the kernel command line
+
+ full     Mitigation is eanbled. CPU is affected and MD_CLEAR is
+          advertised in CPUID.
+
+ vmwerv	  Mitigation is enabled. CPU is affected and MD_CLEAR is not
+	  advertised in CPUID. That is mainly for virtualization
+	  scenarios where the host has the updated microcode but the
+	  hypervisor does not expose MD_CLEAR in CPUID. It's a best
+	  effort approach without guarantee.
+ ======= ============================================================
+
+If the CPU is affected and mds=off is not supplied on the kernel command
+line then the kernel selects the appropriate mitigation mode depending on
+the availability of the MD_CLEAR CPUID bit.
+
 Mitigation points
 -----------------
 
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -995,6 +995,7 @@ extern enum l1tf_mitigations l1tf_mitiga
 enum mds_mitigations {
 	MDS_MITIGATION_OFF,
 	MDS_MITIGATION_FULL,
+	MDS_MITIGATION_VMWERV,
 };
 
 #endif /* _ASM_X86_PROCESSOR_H */
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -224,7 +224,8 @@ static enum mds_mitigations mds_mitigati
 
 static const char * const mds_strings[] = {
 	[MDS_MITIGATION_OFF]	= "Vulnerable",
-	[MDS_MITIGATION_FULL]	= "Mitigation: Clear CPU buffers"
+	[MDS_MITIGATION_FULL]	= "Mitigation: Clear CPU buffers",
+	[MDS_MITIGATION_VMWERV]	= "Vulnerable: Clear CPU buffers attempted, no microcode",
 };
 
 static void mds_select_mitigation(void)
@@ -235,10 +236,9 @@ static void mds_select_mitigation(void)
 	}
 
 	if (mds_mitigation == MDS_MITIGATION_FULL) {
-		if (boot_cpu_has(X86_FEATURE_MD_CLEAR))
-			static_branch_enable(&mds_user_clear);
-		else
-			mds_mitigation = MDS_MITIGATION_OFF;
+		if (!boot_cpu_has(X86_FEATURE_MD_CLEAR))
+			mds_mitigation = MDS_MITIGATION_VMWERV;
+		static_branch_enable(&mds_user_clear);
 	}
 	pr_info("%s\n", mds_strings[mds_mitigation]);
 }
@@ -703,8 +703,14 @@ void arch_smt_update(void)
 		break;
 	}
 
-	if (mds_mitigation == MDS_MITIGATION_FULL)
+	switch(mds_mitigation) {
+	case MDS_MITIGATION_FULL:
+	case MDS_MITIGATION_VMWERV:
 		update_mds_branch_idle();
+		break;
+	case MDS_MITIGATION_OFF:
+		break;
+	}
 
 	mutex_unlock(&spec_ctrl_mutex);
 }

  parent reply	other threads:[~2019-03-01 23:17 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-01 21:47 [patch V6 00/14] MDS basics 0 Thomas Gleixner
2019-03-01 21:47 ` [patch V6 01/14] MDS basics 1 Thomas Gleixner
2019-03-02  0:06   ` [MODERATED] " Frederic Weisbecker
2019-03-01 21:47 ` [patch V6 02/14] MDS basics 2 Thomas Gleixner
2019-03-02  0:34   ` [MODERATED] " Frederic Weisbecker
2019-03-02  8:34   ` Greg KH
2019-03-05 17:54   ` Borislav Petkov
2019-03-01 21:47 ` [patch V6 03/14] MDS basics 3 Thomas Gleixner
2019-03-02  1:12   ` [MODERATED] " Frederic Weisbecker
2019-03-01 21:47 ` [patch V6 04/14] MDS basics 4 Thomas Gleixner
2019-03-02  1:28   ` [MODERATED] " Frederic Weisbecker
2019-03-05 14:52     ` Thomas Gleixner
2019-03-06 20:00   ` [MODERATED] " Andrew Cooper
2019-03-06 20:32     ` Thomas Gleixner
2019-03-07 23:56   ` [MODERATED] " Andi Kleen
2019-03-08  0:36     ` Linus Torvalds
2019-03-01 21:47 ` [patch V6 05/14] MDS basics 5 Thomas Gleixner
2019-03-02  1:37   ` [MODERATED] " Frederic Weisbecker
2019-03-07 23:59   ` Andi Kleen
2019-03-08  6:37     ` Thomas Gleixner
2019-03-01 21:47 ` [patch V6 06/14] MDS basics 6 Thomas Gleixner
2019-03-04  6:28   ` [MODERATED] Encrypted Message Jon Masters
2019-03-05 14:55     ` Thomas Gleixner
2019-03-01 21:47 ` [patch V6 07/14] MDS basics 7 Thomas Gleixner
2019-03-02  2:22   ` [MODERATED] " Frederic Weisbecker
2019-03-05 15:30     ` Thomas Gleixner
2019-03-06 15:49       ` [MODERATED] " Frederic Weisbecker
2019-03-06  5:21   ` Borislav Petkov
2019-03-01 21:47 ` [patch V6 08/14] MDS basics 8 Thomas Gleixner
2019-03-03  2:54   ` [MODERATED] " Frederic Weisbecker
2019-03-04  6:57   ` [MODERATED] Encrypted Message Jon Masters
2019-03-04  7:06     ` Jon Masters
2019-03-04  8:12       ` Jon Masters
2019-03-05 15:34     ` Thomas Gleixner
2019-03-06 16:21       ` [MODERATED] " Jon Masters
2019-03-06 14:11   ` [MODERATED] Re: [patch V6 08/14] MDS basics 8 Borislav Petkov
2019-03-01 21:47 ` [patch V6 09/14] MDS basics 9 Thomas Gleixner
2019-03-06 16:14   ` [MODERATED] " Frederic Weisbecker
2019-03-01 21:47 ` [patch V6 10/14] MDS basics 10 Thomas Gleixner
2019-03-04  6:45   ` [MODERATED] Encrypted Message Jon Masters
2019-03-05 18:42   ` [MODERATED] Re: [patch V6 10/14] MDS basics 10 Andrea Arcangeli
2019-03-06 19:15     ` Thomas Gleixner
2019-03-06 14:31   ` [MODERATED] " Borislav Petkov
2019-03-06 15:30     ` Thomas Gleixner
2019-03-06 18:35       ` Thomas Gleixner
2019-03-06 19:34         ` [MODERATED] Re: " Borislav Petkov
2019-03-01 21:47 ` [patch V6 11/14] MDS basics 11 Thomas Gleixner
2019-03-01 21:47 ` Thomas Gleixner [this message]
2019-03-04  5:47   ` [MODERATED] Encrypted Message Jon Masters
2019-03-05 16:04     ` Thomas Gleixner
2019-03-05 16:40   ` [MODERATED] Re: [patch V6 12/14] MDS basics 12 mark gross
2019-03-06 14:42   ` Borislav Petkov
2019-03-01 21:47 ` [patch V6 13/14] MDS basics 13 Thomas Gleixner
2019-03-03  4:01   ` [MODERATED] " Josh Poimboeuf
2019-03-05 16:04     ` Thomas Gleixner
2019-03-05 16:43   ` [MODERATED] " mark gross
2019-03-01 21:47 ` [patch V6 14/14] MDS basics 14 Thomas Gleixner
2019-03-01 23:48 ` [patch V6 00/14] MDS basics 0 Thomas Gleixner
2019-03-04  5:30 ` [MODERATED] Encrypted Message Jon Masters

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190301214848.253554490@linutronix.de \
    --to=tglx@linutronix.de \
    --cc=speck@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.