From: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To: linux-arm-kernel@lists.infradead.org, arm@kernel.org
Cc: kernel@collabora.com, heiko@sntech.de,
"Marek Szyprowski" <m.szyprowski@samsung.com>,
"Yannick Fertré" <yannick.fertre@st.com>,
"Arnd Bergmann" <arnd@arndb.de>,
"Geert Uytterhoeven" <geert+renesas@glider.be>,
"Alexandre Torgue" <alexandre.torgue@st.com>,
"Biju Das" <biju.das@bp.renesas.com>,
linux-kernel@vger.kernel.org, "Stefan Agner" <stefan@agner.ch>,
"Olof Johansson" <olof@lixom.net>,
"Russell King" <linux@armlinux.org.uk>,
"Simon Horman" <horms+renesas@verge.net.au>
Subject: [PATCH v2] ARM: multi_v7_defconfig: Enable missing drivers for supported Chromebooks
Date: Thu, 7 Mar 2019 16:20:31 +0100 [thread overview]
Message-ID: <20190307152031.13417-1-enric.balletbo@collabora.com> (raw)
Enable following drivers for merged devices:
- Batteries with BQ27XXX chips for Minnie boards.
- Elan eKTH I2C touchscreen for Minnie boards.
- GPIO charger for all Veyron boards.
- Rockchip SARADC driver for all rk3288 boards.
- Rockchip eFUSE driver for all rk3288 boards.
- TPM security chip for all Veyron boards.
- ChromeOS EC userspace interface for all chromebooks boards.
- ChromeOS EC light and proximity sensors for some chromebooks.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
Changes in v2:
- Rebased on top of mainline.
arch/arm/configs/multi_v7_defconfig | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index c75051b9392c..d160ac4bad21 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -288,6 +288,7 @@ CONFIG_MOUSE_ELAN_I2C=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADC=m
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_ELAN=m
CONFIG_TOUCHSCREEN_MMS114=m
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_ST1232=m
@@ -349,6 +350,8 @@ CONFIG_SERIAL_DEV_BUS=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_ST=y
+CONFIG_TCG_TPM=m
+CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
CONFIG_I2C_MUX_PCA954x=y
@@ -444,9 +447,11 @@ CONFIG_POWER_RESET_RMOBILE=y
CONFIG_BATTERY_ACT8945A=y
CONFIG_BATTERY_CPCAP=m
CONFIG_BATTERY_SBS=y
+CONFIG_BATTERY_BQ27XXX=m
CONFIG_AXP20X_POWER=m
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_GPIO=m
CONFIG_CHARGER_CPCAP=m
CONFIG_CHARGER_MAX14577=m
CONFIG_CHARGER_MAX77693=m
@@ -505,6 +510,7 @@ CONFIG_MFD_AXP20X_RSB=y
CONFIG_MFD_CROS_EC=m
CONFIG_CROS_EC_I2C=m
CONFIG_CROS_EC_SPI=m
+CONFIG_MFD_CROS_EC_CHARDEV=m
CONFIG_MFD_DA9063=m
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77686=y
@@ -932,8 +938,12 @@ CONFIG_VF610_ADC=m
CONFIG_XILINX_XADC=y
CONFIG_STM32_LPTIMER_CNT=m
CONFIG_STM32_DAC=m
+CONFIG_ROCKCHIP_SARADC=m
+CONFIG_IIO_CROS_EC_SENSORS_CORE=m
+CONFIG_IIO_CROS_EC_SENSORS=m
CONFIG_MPU3050_I2C=y
CONFIG_CM36651=m
+CONFIG_IIO_CROS_EC_LIGHT_PROX=m
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
CONFIG_AK8975=y
@@ -979,6 +989,7 @@ CONFIG_PHY_UNIPHIER_USB2=y
CONFIG_OMAP_USB2=y
CONFIG_TI_PIPE3=y
CONFIG_TWL4030_USB=m
+CONFIG_ROCKCHIP_EFUSE=m
CONFIG_NVMEM_IMX_OCOTP=y
CONFIG_NVMEM_SUNXI_SID=y
CONFIG_NVMEM_VF610_OCOTP=y
--
2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To: linux-arm-kernel@lists.infradead.org, arm@kernel.org
Cc: heiko@sntech.de, "Geert Uytterhoeven" <geert+renesas@glider.be>,
linux-kernel@vger.kernel.org, "Stefan Agner" <stefan@agner.ch>,
"Biju Das" <biju.das@bp.renesas.com>,
"Yannick Fertré" <yannick.fertre@st.com>,
"Alexandre Torgue" <alexandre.torgue@st.com>,
"Arnd Bergmann" <arnd@arndb.de>,
"Simon Horman" <horms+renesas@verge.net.au>,
"Olof Johansson" <olof@lixom.net>,
"Russell King" <linux@armlinux.org.uk>,
kernel@collabora.com,
"Marek Szyprowski" <m.szyprowski@samsung.com>
Subject: [PATCH v2] ARM: multi_v7_defconfig: Enable missing drivers for supported Chromebooks
Date: Thu, 7 Mar 2019 16:20:31 +0100 [thread overview]
Message-ID: <20190307152031.13417-1-enric.balletbo@collabora.com> (raw)
Enable following drivers for merged devices:
- Batteries with BQ27XXX chips for Minnie boards.
- Elan eKTH I2C touchscreen for Minnie boards.
- GPIO charger for all Veyron boards.
- Rockchip SARADC driver for all rk3288 boards.
- Rockchip eFUSE driver for all rk3288 boards.
- TPM security chip for all Veyron boards.
- ChromeOS EC userspace interface for all chromebooks boards.
- ChromeOS EC light and proximity sensors for some chromebooks.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
Changes in v2:
- Rebased on top of mainline.
arch/arm/configs/multi_v7_defconfig | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index c75051b9392c..d160ac4bad21 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -288,6 +288,7 @@ CONFIG_MOUSE_ELAN_I2C=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADC=m
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
+CONFIG_TOUCHSCREEN_ELAN=m
CONFIG_TOUCHSCREEN_MMS114=m
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_ST1232=m
@@ -349,6 +350,8 @@ CONFIG_SERIAL_DEV_BUS=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_ST=y
+CONFIG_TCG_TPM=m
+CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_ARB_GPIO_CHALLENGE=m
CONFIG_I2C_MUX_PCA954x=y
@@ -444,9 +447,11 @@ CONFIG_POWER_RESET_RMOBILE=y
CONFIG_BATTERY_ACT8945A=y
CONFIG_BATTERY_CPCAP=m
CONFIG_BATTERY_SBS=y
+CONFIG_BATTERY_BQ27XXX=m
CONFIG_AXP20X_POWER=m
CONFIG_BATTERY_MAX17040=m
CONFIG_BATTERY_MAX17042=m
+CONFIG_CHARGER_GPIO=m
CONFIG_CHARGER_CPCAP=m
CONFIG_CHARGER_MAX14577=m
CONFIG_CHARGER_MAX77693=m
@@ -505,6 +510,7 @@ CONFIG_MFD_AXP20X_RSB=y
CONFIG_MFD_CROS_EC=m
CONFIG_CROS_EC_I2C=m
CONFIG_CROS_EC_SPI=m
+CONFIG_MFD_CROS_EC_CHARDEV=m
CONFIG_MFD_DA9063=m
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77686=y
@@ -932,8 +938,12 @@ CONFIG_VF610_ADC=m
CONFIG_XILINX_XADC=y
CONFIG_STM32_LPTIMER_CNT=m
CONFIG_STM32_DAC=m
+CONFIG_ROCKCHIP_SARADC=m
+CONFIG_IIO_CROS_EC_SENSORS_CORE=m
+CONFIG_IIO_CROS_EC_SENSORS=m
CONFIG_MPU3050_I2C=y
CONFIG_CM36651=m
+CONFIG_IIO_CROS_EC_LIGHT_PROX=m
CONFIG_SENSORS_ISL29018=y
CONFIG_SENSORS_ISL29028=y
CONFIG_AK8975=y
@@ -979,6 +989,7 @@ CONFIG_PHY_UNIPHIER_USB2=y
CONFIG_OMAP_USB2=y
CONFIG_TI_PIPE3=y
CONFIG_TWL4030_USB=m
+CONFIG_ROCKCHIP_EFUSE=m
CONFIG_NVMEM_IMX_OCOTP=y
CONFIG_NVMEM_SUNXI_SID=y
CONFIG_NVMEM_VF610_OCOTP=y
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-03-07 15:20 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-07 15:20 Enric Balletbo i Serra [this message]
2019-03-07 15:20 ` [PATCH v2] ARM: multi_v7_defconfig: Enable missing drivers for supported Chromebooks Enric Balletbo i Serra
2019-03-07 18:33 ` Heiko Stübner
2019-03-07 18:33 ` Heiko Stübner
2019-04-23 17:54 ` Heiko Stuebner
2019-04-23 17:54 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190307152031.13417-1-enric.balletbo@collabora.com \
--to=enric.balletbo@collabora.com \
--cc=alexandre.torgue@st.com \
--cc=arm@kernel.org \
--cc=arnd@arndb.de \
--cc=biju.das@bp.renesas.com \
--cc=geert+renesas@glider.be \
--cc=heiko@sntech.de \
--cc=horms+renesas@verge.net.au \
--cc=kernel@collabora.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=m.szyprowski@samsung.com \
--cc=olof@lixom.net \
--cc=stefan@agner.ch \
--cc=yannick.fertre@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.