All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v2] HID: add driver for U2F Zero built-in LED and RNG
@ 2019-03-09 18:32 ` Andrej Shadura
  0 siblings, 0 replies; 8+ messages in thread
From: Andrej Shadura @ 2019-03-09 18:32 UTC (permalink / raw)
  To: Jiří Kosina
  Cc: linux-input, linux-usb, kernel, Theodore Ts'o,
	Vasily Khoruzhick, Nick Kossifidis, linux-crypto

U2F Zero supports custom commands for blinking the LED and getting data
from the internal hardware RNG. Expose the blinking function as a LED
device, and the internal hardware RNG as an HWRNG so that it can be used
to feed the enthropy pool.

Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
---

This version of the patch sets the quality to 1.

---
 drivers/hid/Kconfig       |  15 ++
 drivers/hid/Makefile      |   1 +
 drivers/hid/hid-ids.h     |   1 +
 drivers/hid/hid-u2fzero.c | 371 ++++++++++++++++++++++++++++++++++++++
 4 files changed, 388 insertions(+)
 create mode 100644 drivers/hid/hid-u2fzero.c

diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 41e9935fc584..4f1b8939561d 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -989,6 +989,21 @@ config HID_UDRAW_PS3
 	  Say Y here if you want to use the THQ uDraw gaming tablet for
 	  the PS3.
 
+config HID_U2FZERO
+	tristate "U2F Zero LED and RNG support"
+	depends on HID
+	depends on LEDS_CLASS
+	help
+	  Support for the LED of the U2F Zero device.
+
+	  U2F Zero supports custom commands for blinking the LED
+	  and getting data from the internal hardware RNG.
+	  The internal hardware can be used to feed the enthropy pool.
+
+	  U2F Zero only supports blinking its LED, so this driver doesn't
+	  allow setting the brightness to anything but 1, which will
+	  trigger a single blink and immediately reset to back 0.
+
 config HID_WACOM
 	tristate "Wacom Intuos/Graphire tablet support (USB)"
 	depends on USB_HID
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 896a51ce7ce0..d9724ab8df5f 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -108,6 +108,7 @@ obj-$(CONFIG_HID_THRUSTMASTER)	+= hid-tmff.o
 obj-$(CONFIG_HID_TIVO)		+= hid-tivo.o
 obj-$(CONFIG_HID_TOPSEED)	+= hid-topseed.o
 obj-$(CONFIG_HID_TWINHAN)	+= hid-twinhan.o
+obj-$(CONFIG_HID_U2FZERO)	+= hid-u2fzero.o
 obj-$(CONFIG_HID_UCLOGIC)	+= hid-uclogic.o
 obj-$(CONFIG_HID_UDRAW_PS3)	+= hid-udraw-ps3.o
 obj-$(CONFIG_HID_LED)		+= hid-led.o
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 24f846d67478..36f898eab36f 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -321,6 +321,7 @@
 #define USB_DEVICE_ID_CYGNAL_RADIO_SI470X	0x818a
 #define USB_DEVICE_ID_FOCALTECH_FTXXXX_MULTITOUCH	0x81b9
 #define USB_DEVICE_ID_CYGNAL_CP2112	0xea90
+#define USB_DEVICE_ID_U2F_ZERO		0x8acf
 
 #define USB_DEVICE_ID_CYGNAL_RADIO_SI4713       0x8244
 
diff --git a/drivers/hid/hid-u2fzero.c b/drivers/hid/hid-u2fzero.c
new file mode 100644
index 000000000000..d11a5cb56a0d
--- /dev/null
+++ b/drivers/hid/hid-u2fzero.c
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * U2F Zero LED and RNG driver
+ *
+ * Copyright 2018 Andrej Shadura <andrew@shadura.me>
+ * Loosely based on drivers/hid/hid-led.c
+ *              and drivers/usb/misc/chaoskey.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ */
+
+#include <linux/hid.h>
+#include <linux/hidraw.h>
+#include <linux/hw_random.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/usb.h>
+
+#include "usbhid/usbhid.h"
+#include "hid-ids.h"
+
+#define DRIVER_SHORT		"u2fzero"
+
+#define HID_REPORT_SIZE		64
+
+/* We only use broadcast (CID-less) messages */
+#define CID_BROADCAST		0xffffffff
+
+struct u2f_hid_msg {
+	u32 cid;
+	union {
+		struct {
+			u8 cmd;
+			u8 bcnth;
+			u8 bcntl;
+			u8 data[HID_REPORT_SIZE - 7];
+		} init;
+		struct {
+			u8 seq;
+			u8 data[HID_REPORT_SIZE - 5];
+		} cont;
+	};
+} __packed;
+
+struct u2f_hid_report {
+	u8 report_type;
+	struct u2f_hid_msg msg;
+} __packed;
+
+#define U2F_HID_MSG_LEN(f)	(size_t)(((f).init.bcnth << 8) + (f).init.bcntl)
+
+/* Custom extensions to the U2FHID protocol */
+#define U2F_CUSTOM_GET_RNG	0x21
+#define U2F_CUSTOM_WINK		0x24
+
+struct u2fzero_device {
+	struct hid_device	*hdev;
+	struct urb		*urb;	    /* URB for the RNG data */
+	struct led_classdev	ldev;	    /* Embedded struct for led */
+	struct hwrng		hwrng;	    /* Embedded struct for hwrng */
+	char			*led_name;
+	char			*rng_name;
+	u8			*buf_out;
+	u8			*buf_in;
+	struct mutex		lock;
+	bool			present;
+};
+
+static int u2fzero_send(struct u2fzero_device *dev, struct u2f_hid_report *req)
+{
+	int ret;
+
+	mutex_lock(&dev->lock);
+
+	memcpy(dev->buf_out, req, sizeof(struct u2f_hid_report));
+
+	ret = hid_hw_output_report(dev->hdev, dev->buf_out,
+				   sizeof(struct u2f_hid_msg));
+
+	mutex_unlock(&dev->lock);
+
+	if (ret < 0)
+		return ret;
+
+	return ret == sizeof(struct u2f_hid_msg) ? 0 : -EMSGSIZE;
+}
+
+struct u2fzero_transfer_context {
+	struct completion done;
+	int status;
+};
+
+static void u2fzero_read_callback(struct urb *urb)
+{
+	struct u2fzero_transfer_context *ctx = urb->context;
+
+	ctx->status = urb->status;
+	complete(&ctx->done);
+}
+
+static int u2fzero_recv(struct u2fzero_device *dev,
+			struct u2f_hid_report *req,
+			struct u2f_hid_msg *resp)
+{
+	int ret;
+	struct hid_device *hdev = dev->hdev;
+	struct u2fzero_transfer_context ctx;
+
+	mutex_lock(&dev->lock);
+
+	memcpy(dev->buf_out, req, sizeof(struct u2f_hid_report));
+
+	dev->urb->context = &ctx;
+	init_completion(&ctx.done);
+
+	ret = usb_submit_urb(dev->urb, GFP_NOIO);
+	if (unlikely(ret)) {
+		hid_err(hdev, "usb_submit_urb failed: %d", ret);
+		goto err;
+	}
+
+	ret = hid_hw_output_report(dev->hdev, dev->buf_out,
+				   sizeof(struct u2f_hid_msg));
+
+	if (ret < 0) {
+		hid_err(hdev, "hid_hw_output_report failed: %d", ret);
+		goto err;
+	}
+
+	ret = (wait_for_completion_timeout(
+		&ctx.done, msecs_to_jiffies(USB_CTRL_SET_TIMEOUT)));
+	if (ret < 0) {
+		usb_kill_urb(dev->urb);
+		hid_err(hdev, "urb submission timed out");
+	} else {
+		ret = dev->urb->actual_length;
+		memcpy(resp, dev->buf_in, ret);
+	}
+
+err:
+	mutex_unlock(&dev->lock);
+
+	return ret;
+}
+
+static int u2fzero_blink(struct led_classdev *ldev)
+{
+	struct u2fzero_device *dev = container_of(ldev,
+		struct u2fzero_device, ldev);
+	struct u2f_hid_report req = {
+		.report_type = 0,
+		.msg.cid = CID_BROADCAST,
+		.msg.init = {
+			.cmd = U2F_CUSTOM_WINK,
+			.bcnth = 0,
+			.bcntl = 0,
+			.data  = {0},
+		}
+	};
+	return u2fzero_send(dev, &req);
+}
+
+static int u2fzero_brightness_set(struct led_classdev *ldev,
+				  enum led_brightness brightness)
+{
+	ldev->brightness = LED_OFF;
+	if (brightness)
+		return u2fzero_blink(ldev);
+	else
+		return 0;
+}
+
+static int u2fzero_rng_read(struct hwrng *rng, void *data,
+			    size_t max, bool wait)
+{
+	struct u2fzero_device *dev = container_of(rng,
+		struct u2fzero_device, hwrng);
+	struct u2f_hid_report req = {
+		.report_type = 0,
+		.msg.cid = CID_BROADCAST,
+		.msg.init = {
+			.cmd = U2F_CUSTOM_GET_RNG,
+			.bcnth = 0,
+			.bcntl = 0,
+			.data  = {0},
+		}
+	};
+	struct u2f_hid_msg resp;
+	int ret;
+	size_t actual_length;
+
+	if (!dev->present) {
+		hid_dbg(dev->hdev, "device not present");
+		return 0;
+	}
+
+	ret = u2fzero_recv(dev, &req, &resp);
+	if (ret < 0)
+		return 0;
+
+	/* only take the minimum amount of data it is safe to take */
+	actual_length = min3((size_t)ret - offsetof(struct u2f_hid_msg,
+		init.data), U2F_HID_MSG_LEN(resp), max);
+
+	memcpy(data, resp.init.data, actual_length);
+
+	return actual_length;
+}
+
+static int u2fzero_init_led(struct u2fzero_device *dev,
+			    unsigned int minor)
+{
+	dev->led_name = devm_kasprintf(&dev->hdev->dev, GFP_KERNEL,
+		"%s%u", DRIVER_SHORT, minor);
+	if (dev->led_name == NULL)
+		return -ENOMEM;
+
+	dev->ldev.name = dev->led_name;
+	dev->ldev.max_brightness = LED_ON;
+	dev->ldev.flags = LED_HW_PLUGGABLE;
+	dev->ldev.brightness_set_blocking = u2fzero_brightness_set;
+
+	return devm_led_classdev_register(&dev->hdev->dev, &dev->ldev);
+}
+
+static int u2fzero_init_hwrng(struct u2fzero_device *dev,
+			      unsigned int minor)
+{
+	dev->rng_name = devm_kasprintf(&dev->hdev->dev, GFP_KERNEL,
+		"%s-rng%u", DRIVER_SHORT, minor);
+	if (dev->rng_name == NULL)
+		return -ENOMEM;
+
+	dev->hwrng.name = dev->rng_name;
+	dev->hwrng.read = u2fzero_rng_read;
+	dev->hwrng.quality = 1;
+
+	return devm_hwrng_register(&dev->hdev->dev, &dev->hwrng);
+}
+
+static int u2fzero_fill_in_urb(struct u2fzero_device *dev)
+{
+	struct hid_device *hdev = dev->hdev;
+	struct usb_device *udev;
+	struct usbhid_device *usbhid = hdev->driver_data;
+	unsigned int pipe_in;
+	struct usb_host_endpoint *ep;
+
+	if (dev->hdev->bus != BUS_USB)
+		return -EINVAL;
+
+	udev = hid_to_usb_dev(hdev);
+
+	if (!usbhid->urbout || !usbhid->urbin)
+		return -ENODEV;
+
+	ep = usb_pipe_endpoint(udev, usbhid->urbin->pipe);
+	if (!ep)
+		return -ENODEV;
+
+	dev->urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->urb)
+		return -ENOMEM;
+
+	pipe_in = (usbhid->urbin->pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30);
+
+	usb_fill_int_urb(dev->urb,
+		udev,
+		pipe_in,
+		dev->buf_in,
+		HID_REPORT_SIZE,
+		u2fzero_read_callback,
+		NULL,
+		ep->desc.bInterval);
+
+	return 0;
+}
+
+static int u2fzero_probe(struct hid_device *hdev,
+			 const struct hid_device_id *id)
+{
+	struct u2fzero_device *dev;
+	unsigned int minor;
+	int ret;
+
+	dev = devm_kzalloc(&hdev->dev, sizeof(*dev), GFP_KERNEL);
+	if (dev == NULL)
+		return -ENOMEM;
+
+	dev->buf_out = devm_kmalloc(&hdev->dev,
+		sizeof(struct u2f_hid_report), GFP_KERNEL);
+	if (dev->buf_out == NULL)
+		return -ENOMEM;
+
+	dev->buf_in = devm_kmalloc(&hdev->dev,
+		sizeof(struct u2f_hid_msg), GFP_KERNEL);
+	if (dev->buf_in == NULL)
+		return -ENOMEM;
+
+	ret = hid_parse(hdev);
+	if (ret)
+		return ret;
+
+	dev->hdev = hdev;
+	hid_set_drvdata(hdev, dev);
+	mutex_init(&dev->lock);
+
+	ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
+	if (ret)
+		return ret;
+
+	u2fzero_fill_in_urb(dev);
+
+	dev->present = true;
+
+	minor = ((struct hidraw *) hdev->hidraw)->minor;
+
+	ret = u2fzero_init_led(dev, minor);
+	if (ret) {
+		hid_hw_stop(hdev);
+		return ret;
+	}
+
+	hid_info(hdev, "U2F Zero LED initialised\n");
+
+	ret = u2fzero_init_hwrng(dev, minor);
+	if (ret) {
+		hid_hw_stop(hdev);
+		return ret;
+	}
+
+	hid_info(hdev, "U2F Zero RNG initialised\n");
+
+	return 0;
+}
+
+static void u2fzero_remove(struct hid_device *hdev)
+{
+	struct u2fzero_device *dev = hid_get_drvdata(hdev);
+
+	mutex_lock(&dev->lock);
+	dev->present = false;
+	mutex_unlock(&dev->lock);
+
+	hid_hw_stop(hdev);
+	usb_poison_urb(dev->urb);
+	usb_free_urb(dev->urb);
+}
+
+static const struct hid_device_id u2fzero_table[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL,
+	  USB_DEVICE_ID_U2F_ZERO) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, u2fzero_table);
+
+static struct hid_driver u2fzero_driver = {
+	.name = "hid-" DRIVER_SHORT,
+	.probe = u2fzero_probe,
+	.remove = u2fzero_remove,
+	.id_table = u2fzero_table,
+};
+
+module_hid_driver(u2fzero_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andrej Shadura <andrew@shadura.me>");
+MODULE_DESCRIPTION("U2F Zero LED and RNG driver");
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* [v2] HID: add driver for U2F Zero built-in LED and RNG
@ 2019-03-09 18:32 ` Andrej Shadura
  0 siblings, 0 replies; 8+ messages in thread
From: Andrej Shadura @ 2019-03-09 18:32 UTC (permalink / raw)
  To: Jiří Kosina
  Cc: linux-input, linux-usb, kernel, Theodore Ts'o,
	Vasily Khoruzhick, Nick Kossifidis, linux-crypto

U2F Zero supports custom commands for blinking the LED and getting data
from the internal hardware RNG. Expose the blinking function as a LED
device, and the internal hardware RNG as an HWRNG so that it can be used
to feed the enthropy pool.

Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
---

This version of the patch sets the quality to 1.

---
 drivers/hid/Kconfig       |  15 ++
 drivers/hid/Makefile      |   1 +
 drivers/hid/hid-ids.h     |   1 +
 drivers/hid/hid-u2fzero.c | 371 ++++++++++++++++++++++++++++++++++++++
 4 files changed, 388 insertions(+)
 create mode 100644 drivers/hid/hid-u2fzero.c

diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 41e9935fc584..4f1b8939561d 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -989,6 +989,21 @@ config HID_UDRAW_PS3
 	  Say Y here if you want to use the THQ uDraw gaming tablet for
 	  the PS3.
 
+config HID_U2FZERO
+	tristate "U2F Zero LED and RNG support"
+	depends on HID
+	depends on LEDS_CLASS
+	help
+	  Support for the LED of the U2F Zero device.
+
+	  U2F Zero supports custom commands for blinking the LED
+	  and getting data from the internal hardware RNG.
+	  The internal hardware can be used to feed the enthropy pool.
+
+	  U2F Zero only supports blinking its LED, so this driver doesn't
+	  allow setting the brightness to anything but 1, which will
+	  trigger a single blink and immediately reset to back 0.
+
 config HID_WACOM
 	tristate "Wacom Intuos/Graphire tablet support (USB)"
 	depends on USB_HID
diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
index 896a51ce7ce0..d9724ab8df5f 100644
--- a/drivers/hid/Makefile
+++ b/drivers/hid/Makefile
@@ -108,6 +108,7 @@ obj-$(CONFIG_HID_THRUSTMASTER)	+= hid-tmff.o
 obj-$(CONFIG_HID_TIVO)		+= hid-tivo.o
 obj-$(CONFIG_HID_TOPSEED)	+= hid-topseed.o
 obj-$(CONFIG_HID_TWINHAN)	+= hid-twinhan.o
+obj-$(CONFIG_HID_U2FZERO)	+= hid-u2fzero.o
 obj-$(CONFIG_HID_UCLOGIC)	+= hid-uclogic.o
 obj-$(CONFIG_HID_UDRAW_PS3)	+= hid-udraw-ps3.o
 obj-$(CONFIG_HID_LED)		+= hid-led.o
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 24f846d67478..36f898eab36f 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -321,6 +321,7 @@
 #define USB_DEVICE_ID_CYGNAL_RADIO_SI470X	0x818a
 #define USB_DEVICE_ID_FOCALTECH_FTXXXX_MULTITOUCH	0x81b9
 #define USB_DEVICE_ID_CYGNAL_CP2112	0xea90
+#define USB_DEVICE_ID_U2F_ZERO		0x8acf
 
 #define USB_DEVICE_ID_CYGNAL_RADIO_SI4713       0x8244
 
diff --git a/drivers/hid/hid-u2fzero.c b/drivers/hid/hid-u2fzero.c
new file mode 100644
index 000000000000..d11a5cb56a0d
--- /dev/null
+++ b/drivers/hid/hid-u2fzero.c
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * U2F Zero LED and RNG driver
+ *
+ * Copyright 2018 Andrej Shadura <andrew@shadura.me>
+ * Loosely based on drivers/hid/hid-led.c
+ *              and drivers/usb/misc/chaoskey.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ */
+
+#include <linux/hid.h>
+#include <linux/hidraw.h>
+#include <linux/hw_random.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/usb.h>
+
+#include "usbhid/usbhid.h"
+#include "hid-ids.h"
+
+#define DRIVER_SHORT		"u2fzero"
+
+#define HID_REPORT_SIZE		64
+
+/* We only use broadcast (CID-less) messages */
+#define CID_BROADCAST		0xffffffff
+
+struct u2f_hid_msg {
+	u32 cid;
+	union {
+		struct {
+			u8 cmd;
+			u8 bcnth;
+			u8 bcntl;
+			u8 data[HID_REPORT_SIZE - 7];
+		} init;
+		struct {
+			u8 seq;
+			u8 data[HID_REPORT_SIZE - 5];
+		} cont;
+	};
+} __packed;
+
+struct u2f_hid_report {
+	u8 report_type;
+	struct u2f_hid_msg msg;
+} __packed;
+
+#define U2F_HID_MSG_LEN(f)	(size_t)(((f).init.bcnth << 8) + (f).init.bcntl)
+
+/* Custom extensions to the U2FHID protocol */
+#define U2F_CUSTOM_GET_RNG	0x21
+#define U2F_CUSTOM_WINK		0x24
+
+struct u2fzero_device {
+	struct hid_device	*hdev;
+	struct urb		*urb;	    /* URB for the RNG data */
+	struct led_classdev	ldev;	    /* Embedded struct for led */
+	struct hwrng		hwrng;	    /* Embedded struct for hwrng */
+	char			*led_name;
+	char			*rng_name;
+	u8			*buf_out;
+	u8			*buf_in;
+	struct mutex		lock;
+	bool			present;
+};
+
+static int u2fzero_send(struct u2fzero_device *dev, struct u2f_hid_report *req)
+{
+	int ret;
+
+	mutex_lock(&dev->lock);
+
+	memcpy(dev->buf_out, req, sizeof(struct u2f_hid_report));
+
+	ret = hid_hw_output_report(dev->hdev, dev->buf_out,
+				   sizeof(struct u2f_hid_msg));
+
+	mutex_unlock(&dev->lock);
+
+	if (ret < 0)
+		return ret;
+
+	return ret == sizeof(struct u2f_hid_msg) ? 0 : -EMSGSIZE;
+}
+
+struct u2fzero_transfer_context {
+	struct completion done;
+	int status;
+};
+
+static void u2fzero_read_callback(struct urb *urb)
+{
+	struct u2fzero_transfer_context *ctx = urb->context;
+
+	ctx->status = urb->status;
+	complete(&ctx->done);
+}
+
+static int u2fzero_recv(struct u2fzero_device *dev,
+			struct u2f_hid_report *req,
+			struct u2f_hid_msg *resp)
+{
+	int ret;
+	struct hid_device *hdev = dev->hdev;
+	struct u2fzero_transfer_context ctx;
+
+	mutex_lock(&dev->lock);
+
+	memcpy(dev->buf_out, req, sizeof(struct u2f_hid_report));
+
+	dev->urb->context = &ctx;
+	init_completion(&ctx.done);
+
+	ret = usb_submit_urb(dev->urb, GFP_NOIO);
+	if (unlikely(ret)) {
+		hid_err(hdev, "usb_submit_urb failed: %d", ret);
+		goto err;
+	}
+
+	ret = hid_hw_output_report(dev->hdev, dev->buf_out,
+				   sizeof(struct u2f_hid_msg));
+
+	if (ret < 0) {
+		hid_err(hdev, "hid_hw_output_report failed: %d", ret);
+		goto err;
+	}
+
+	ret = (wait_for_completion_timeout(
+		&ctx.done, msecs_to_jiffies(USB_CTRL_SET_TIMEOUT)));
+	if (ret < 0) {
+		usb_kill_urb(dev->urb);
+		hid_err(hdev, "urb submission timed out");
+	} else {
+		ret = dev->urb->actual_length;
+		memcpy(resp, dev->buf_in, ret);
+	}
+
+err:
+	mutex_unlock(&dev->lock);
+
+	return ret;
+}
+
+static int u2fzero_blink(struct led_classdev *ldev)
+{
+	struct u2fzero_device *dev = container_of(ldev,
+		struct u2fzero_device, ldev);
+	struct u2f_hid_report req = {
+		.report_type = 0,
+		.msg.cid = CID_BROADCAST,
+		.msg.init = {
+			.cmd = U2F_CUSTOM_WINK,
+			.bcnth = 0,
+			.bcntl = 0,
+			.data  = {0},
+		}
+	};
+	return u2fzero_send(dev, &req);
+}
+
+static int u2fzero_brightness_set(struct led_classdev *ldev,
+				  enum led_brightness brightness)
+{
+	ldev->brightness = LED_OFF;
+	if (brightness)
+		return u2fzero_blink(ldev);
+	else
+		return 0;
+}
+
+static int u2fzero_rng_read(struct hwrng *rng, void *data,
+			    size_t max, bool wait)
+{
+	struct u2fzero_device *dev = container_of(rng,
+		struct u2fzero_device, hwrng);
+	struct u2f_hid_report req = {
+		.report_type = 0,
+		.msg.cid = CID_BROADCAST,
+		.msg.init = {
+			.cmd = U2F_CUSTOM_GET_RNG,
+			.bcnth = 0,
+			.bcntl = 0,
+			.data  = {0},
+		}
+	};
+	struct u2f_hid_msg resp;
+	int ret;
+	size_t actual_length;
+
+	if (!dev->present) {
+		hid_dbg(dev->hdev, "device not present");
+		return 0;
+	}
+
+	ret = u2fzero_recv(dev, &req, &resp);
+	if (ret < 0)
+		return 0;
+
+	/* only take the minimum amount of data it is safe to take */
+	actual_length = min3((size_t)ret - offsetof(struct u2f_hid_msg,
+		init.data), U2F_HID_MSG_LEN(resp), max);
+
+	memcpy(data, resp.init.data, actual_length);
+
+	return actual_length;
+}
+
+static int u2fzero_init_led(struct u2fzero_device *dev,
+			    unsigned int minor)
+{
+	dev->led_name = devm_kasprintf(&dev->hdev->dev, GFP_KERNEL,
+		"%s%u", DRIVER_SHORT, minor);
+	if (dev->led_name == NULL)
+		return -ENOMEM;
+
+	dev->ldev.name = dev->led_name;
+	dev->ldev.max_brightness = LED_ON;
+	dev->ldev.flags = LED_HW_PLUGGABLE;
+	dev->ldev.brightness_set_blocking = u2fzero_brightness_set;
+
+	return devm_led_classdev_register(&dev->hdev->dev, &dev->ldev);
+}
+
+static int u2fzero_init_hwrng(struct u2fzero_device *dev,
+			      unsigned int minor)
+{
+	dev->rng_name = devm_kasprintf(&dev->hdev->dev, GFP_KERNEL,
+		"%s-rng%u", DRIVER_SHORT, minor);
+	if (dev->rng_name == NULL)
+		return -ENOMEM;
+
+	dev->hwrng.name = dev->rng_name;
+	dev->hwrng.read = u2fzero_rng_read;
+	dev->hwrng.quality = 1;
+
+	return devm_hwrng_register(&dev->hdev->dev, &dev->hwrng);
+}
+
+static int u2fzero_fill_in_urb(struct u2fzero_device *dev)
+{
+	struct hid_device *hdev = dev->hdev;
+	struct usb_device *udev;
+	struct usbhid_device *usbhid = hdev->driver_data;
+	unsigned int pipe_in;
+	struct usb_host_endpoint *ep;
+
+	if (dev->hdev->bus != BUS_USB)
+		return -EINVAL;
+
+	udev = hid_to_usb_dev(hdev);
+
+	if (!usbhid->urbout || !usbhid->urbin)
+		return -ENODEV;
+
+	ep = usb_pipe_endpoint(udev, usbhid->urbin->pipe);
+	if (!ep)
+		return -ENODEV;
+
+	dev->urb = usb_alloc_urb(0, GFP_KERNEL);
+	if (!dev->urb)
+		return -ENOMEM;
+
+	pipe_in = (usbhid->urbin->pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30);
+
+	usb_fill_int_urb(dev->urb,
+		udev,
+		pipe_in,
+		dev->buf_in,
+		HID_REPORT_SIZE,
+		u2fzero_read_callback,
+		NULL,
+		ep->desc.bInterval);
+
+	return 0;
+}
+
+static int u2fzero_probe(struct hid_device *hdev,
+			 const struct hid_device_id *id)
+{
+	struct u2fzero_device *dev;
+	unsigned int minor;
+	int ret;
+
+	dev = devm_kzalloc(&hdev->dev, sizeof(*dev), GFP_KERNEL);
+	if (dev == NULL)
+		return -ENOMEM;
+
+	dev->buf_out = devm_kmalloc(&hdev->dev,
+		sizeof(struct u2f_hid_report), GFP_KERNEL);
+	if (dev->buf_out == NULL)
+		return -ENOMEM;
+
+	dev->buf_in = devm_kmalloc(&hdev->dev,
+		sizeof(struct u2f_hid_msg), GFP_KERNEL);
+	if (dev->buf_in == NULL)
+		return -ENOMEM;
+
+	ret = hid_parse(hdev);
+	if (ret)
+		return ret;
+
+	dev->hdev = hdev;
+	hid_set_drvdata(hdev, dev);
+	mutex_init(&dev->lock);
+
+	ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
+	if (ret)
+		return ret;
+
+	u2fzero_fill_in_urb(dev);
+
+	dev->present = true;
+
+	minor = ((struct hidraw *) hdev->hidraw)->minor;
+
+	ret = u2fzero_init_led(dev, minor);
+	if (ret) {
+		hid_hw_stop(hdev);
+		return ret;
+	}
+
+	hid_info(hdev, "U2F Zero LED initialised\n");
+
+	ret = u2fzero_init_hwrng(dev, minor);
+	if (ret) {
+		hid_hw_stop(hdev);
+		return ret;
+	}
+
+	hid_info(hdev, "U2F Zero RNG initialised\n");
+
+	return 0;
+}
+
+static void u2fzero_remove(struct hid_device *hdev)
+{
+	struct u2fzero_device *dev = hid_get_drvdata(hdev);
+
+	mutex_lock(&dev->lock);
+	dev->present = false;
+	mutex_unlock(&dev->lock);
+
+	hid_hw_stop(hdev);
+	usb_poison_urb(dev->urb);
+	usb_free_urb(dev->urb);
+}
+
+static const struct hid_device_id u2fzero_table[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL,
+	  USB_DEVICE_ID_U2F_ZERO) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, u2fzero_table);
+
+static struct hid_driver u2fzero_driver = {
+	.name = "hid-" DRIVER_SHORT,
+	.probe = u2fzero_probe,
+	.remove = u2fzero_remove,
+	.id_table = u2fzero_table,
+};
+
+module_hid_driver(u2fzero_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andrej Shadura <andrew@shadura.me>");
+MODULE_DESCRIPTION("U2F Zero LED and RNG driver");

^ permalink raw reply related	[flat|nested] 8+ messages in thread

* Re: [PATCH v2] HID: add driver for U2F Zero built-in LED and RNG
@ 2019-03-18 14:44   ` Jiri Kosina
  0 siblings, 0 replies; 8+ messages in thread
From: Jiri Kosina @ 2019-03-18 14:44 UTC (permalink / raw)
  To: Andrej Shadura
  Cc: linux-input, linux-usb, kernel, Theodore Ts'o,
	Vasily Khoruzhick, Nick Kossifidis, linux-crypto

On Sat, 9 Mar 2019, Andrej Shadura wrote:

> U2F Zero supports custom commands for blinking the LED and getting data
> from the internal hardware RNG. Expose the blinking function as a LED
> device, and the internal hardware RNG as an HWRNG so that it can be used
> to feed the enthropy pool.
> 
> Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
> ---
> 
> This version of the patch sets the quality to 1.
> 
> ---
>  drivers/hid/Kconfig       |  15 ++
>  drivers/hid/Makefile      |   1 +
>  drivers/hid/hid-ids.h     |   1 +
>  drivers/hid/hid-u2fzero.c | 371 ++++++++++++++++++++++++++++++++++++++
>  4 files changed, 388 insertions(+)
>  create mode 100644 drivers/hid/hid-u2fzero.c
> 
> diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
> index 41e9935fc584..4f1b8939561d 100644
> --- a/drivers/hid/Kconfig
> +++ b/drivers/hid/Kconfig
> @@ -989,6 +989,21 @@ config HID_UDRAW_PS3
>  	  Say Y here if you want to use the THQ uDraw gaming tablet for
>  	  the PS3.
>  
> +config HID_U2FZERO
> +	tristate "U2F Zero LED and RNG support"
> +	depends on HID
> +	depends on LEDS_CLASS
> +	help
> +	  Support for the LED of the U2F Zero device.
> +
> +	  U2F Zero supports custom commands for blinking the LED
> +	  and getting data from the internal hardware RNG.
> +	  The internal hardware can be used to feed the enthropy pool.
> +
> +	  U2F Zero only supports blinking its LED, so this driver doesn't
> +	  allow setting the brightness to anything but 1, which will
> +	  trigger a single blink and immediately reset to back 0.
> +

This driver isn't really a generic (transport-agnostic) one (which also 
means it's missing USB dependency in Kconfig btw).

Is there a reason why it can't be abstracted that way so that it'd fit our 
principal model in HID subsystem?

Also, I've looked at it really briefly, but can't it be easily implemented 
in userspace?

Thanks,

-- 
Jiri Kosina
SUSE Labs


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [v2] HID: add driver for U2F Zero built-in LED and RNG
@ 2019-03-18 14:44   ` Jiri Kosina
  0 siblings, 0 replies; 8+ messages in thread
From: Jiri Kosina @ 2019-03-18 14:44 UTC (permalink / raw)
  To: Andrej Shadura
  Cc: linux-input, linux-usb, kernel, Theodore Ts'o,
	Vasily Khoruzhick, Nick Kossifidis, linux-crypto

On Sat, 9 Mar 2019, Andrej Shadura wrote:

> U2F Zero supports custom commands for blinking the LED and getting data
> from the internal hardware RNG. Expose the blinking function as a LED
> device, and the internal hardware RNG as an HWRNG so that it can be used
> to feed the enthropy pool.
> 
> Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
> ---
> 
> This version of the patch sets the quality to 1.
> 
> ---
>  drivers/hid/Kconfig       |  15 ++
>  drivers/hid/Makefile      |   1 +
>  drivers/hid/hid-ids.h     |   1 +
>  drivers/hid/hid-u2fzero.c | 371 ++++++++++++++++++++++++++++++++++++++
>  4 files changed, 388 insertions(+)
>  create mode 100644 drivers/hid/hid-u2fzero.c
> 
> diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
> index 41e9935fc584..4f1b8939561d 100644
> --- a/drivers/hid/Kconfig
> +++ b/drivers/hid/Kconfig
> @@ -989,6 +989,21 @@ config HID_UDRAW_PS3
>  	  Say Y here if you want to use the THQ uDraw gaming tablet for
>  	  the PS3.
>  
> +config HID_U2FZERO
> +	tristate "U2F Zero LED and RNG support"
> +	depends on HID
> +	depends on LEDS_CLASS
> +	help
> +	  Support for the LED of the U2F Zero device.
> +
> +	  U2F Zero supports custom commands for blinking the LED
> +	  and getting data from the internal hardware RNG.
> +	  The internal hardware can be used to feed the enthropy pool.
> +
> +	  U2F Zero only supports blinking its LED, so this driver doesn't
> +	  allow setting the brightness to anything but 1, which will
> +	  trigger a single blink and immediately reset to back 0.
> +

This driver isn't really a generic (transport-agnostic) one (which also 
means it's missing USB dependency in Kconfig btw).

Is there a reason why it can't be abstracted that way so that it'd fit our 
principal model in HID subsystem?

Also, I've looked at it really briefly, but can't it be easily implemented 
in userspace?

Thanks,

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v2] HID: add driver for U2F Zero built-in LED and RNG
@ 2019-03-18 14:51     ` Andrej Shadura
  0 siblings, 0 replies; 8+ messages in thread
From: Andrej Shadura @ 2019-03-18 14:51 UTC (permalink / raw)
  To: Jiří Kosina
  Cc: linux-input, linux-usb, kernel, Theodore Ts'o,
	Vasily Khoruzhick, Nick Kossifidis, linux-crypto

On 18/03/2019 15:44, Jiri Kosina wrote:
> On Sat, 9 Mar 2019, Andrej Shadura wrote:
> 
>> U2F Zero supports custom commands for blinking the LED and getting data
>> from the internal hardware RNG. Expose the blinking function as a LED
>> device, and the internal hardware RNG as an HWRNG so that it can be used
>> to feed the enthropy pool.
>>
>> Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
>> ---
>>
>> This version of the patch sets the quality to 1.
>>
>> ---
>>  drivers/hid/Kconfig       |  15 ++
>>  drivers/hid/Makefile      |   1 +
>>  drivers/hid/hid-ids.h     |   1 +
>>  drivers/hid/hid-u2fzero.c | 371 ++++++++++++++++++++++++++++++++++++++
>>  4 files changed, 388 insertions(+)
>>  create mode 100644 drivers/hid/hid-u2fzero.c
>>
>> diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
>> index 41e9935fc584..4f1b8939561d 100644
>> --- a/drivers/hid/Kconfig
>> +++ b/drivers/hid/Kconfig
>> @@ -989,6 +989,21 @@ config HID_UDRAW_PS3
>>  	  Say Y here if you want to use the THQ uDraw gaming tablet for
>>  	  the PS3.
>>  
>> +config HID_U2FZERO
>> +	tristate "U2F Zero LED and RNG support"
>> +	depends on HID
>> +	depends on LEDS_CLASS
>> +	help
>> +	  Support for the LED of the U2F Zero device.
>> +
>> +	  U2F Zero supports custom commands for blinking the LED
>> +	  and getting data from the internal hardware RNG.
>> +	  The internal hardware can be used to feed the enthropy pool.
>> +
>> +	  U2F Zero only supports blinking its LED, so this driver doesn't
>> +	  allow setting the brightness to anything but 1, which will
>> +	  trigger a single blink and immediately reset to back 0.
>> +
> 
> This driver isn't really a generic (transport-agnostic) one (which also 
> means it's missing USB dependency in Kconfig btw).

Thanks, I forgot that one.

> Is there a reason why it can't be abstracted that way so that it'd fit our 
> principal model in HID subsystem?

I tried and I failed. The HID subsystem doesn’t provide the
functionality necessary to implement the protocol, or maybe I’m missing
something, but I haven’t found a way.

> Also, I've looked at it really briefly, but can't it be easily implemented 
> in userspace?

Well, it could, but I would like this to work out of the box without a
need of extra userspace code (the RNG mainly, the LED support was just
an additional "why not" thing).

-- 
Cheers,
  Andrej

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [v2] HID: add driver for U2F Zero built-in LED and RNG
@ 2019-03-18 14:51     ` Andrej Shadura
  0 siblings, 0 replies; 8+ messages in thread
From: Andrej Shadura @ 2019-03-18 14:51 UTC (permalink / raw)
  To: Jiří Kosina
  Cc: linux-input, linux-usb, kernel, Theodore Ts'o,
	Vasily Khoruzhick, Nick Kossifidis, linux-crypto

On 18/03/2019 15:44, Jiri Kosina wrote:
> On Sat, 9 Mar 2019, Andrej Shadura wrote:
> 
>> U2F Zero supports custom commands for blinking the LED and getting data
>> from the internal hardware RNG. Expose the blinking function as a LED
>> device, and the internal hardware RNG as an HWRNG so that it can be used
>> to feed the enthropy pool.
>>
>> Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
>> ---
>>
>> This version of the patch sets the quality to 1.
>>
>> ---
>>  drivers/hid/Kconfig       |  15 ++
>>  drivers/hid/Makefile      |   1 +
>>  drivers/hid/hid-ids.h     |   1 +
>>  drivers/hid/hid-u2fzero.c | 371 ++++++++++++++++++++++++++++++++++++++
>>  4 files changed, 388 insertions(+)
>>  create mode 100644 drivers/hid/hid-u2fzero.c
>>
>> diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
>> index 41e9935fc584..4f1b8939561d 100644
>> --- a/drivers/hid/Kconfig
>> +++ b/drivers/hid/Kconfig
>> @@ -989,6 +989,21 @@ config HID_UDRAW_PS3
>>  	  Say Y here if you want to use the THQ uDraw gaming tablet for
>>  	  the PS3.
>>  
>> +config HID_U2FZERO
>> +	tristate "U2F Zero LED and RNG support"
>> +	depends on HID
>> +	depends on LEDS_CLASS
>> +	help
>> +	  Support for the LED of the U2F Zero device.
>> +
>> +	  U2F Zero supports custom commands for blinking the LED
>> +	  and getting data from the internal hardware RNG.
>> +	  The internal hardware can be used to feed the enthropy pool.
>> +
>> +	  U2F Zero only supports blinking its LED, so this driver doesn't
>> +	  allow setting the brightness to anything but 1, which will
>> +	  trigger a single blink and immediately reset to back 0.
>> +
> 
> This driver isn't really a generic (transport-agnostic) one (which also 
> means it's missing USB dependency in Kconfig btw).

Thanks, I forgot that one.

> Is there a reason why it can't be abstracted that way so that it'd fit our 
> principal model in HID subsystem?

I tried and I failed. The HID subsystem doesn’t provide the
functionality necessary to implement the protocol, or maybe I’m missing
something, but I haven’t found a way.

> Also, I've looked at it really briefly, but can't it be easily implemented 
> in userspace?

Well, it could, but I would like this to work out of the box without a
need of extra userspace code (the RNG mainly, the LED support was just
an additional "why not" thing).

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH v2] HID: add driver for U2F Zero built-in LED and RNG
@ 2019-03-27 14:07       ` Jiri Kosina
  0 siblings, 0 replies; 8+ messages in thread
From: Jiri Kosina @ 2019-03-27 14:07 UTC (permalink / raw)
  To: Andrej Shadura
  Cc: linux-input, linux-usb, kernel, Theodore Ts'o,
	Vasily Khoruzhick, Nick Kossifidis, linux-crypto

On Mon, 18 Mar 2019, Andrej Shadura wrote:

> > 
> > This driver isn't really a generic (transport-agnostic) one (which also 
> > means it's missing USB dependency in Kconfig btw).
> 
> Thanks, I forgot that one.
> 
> > Is there a reason why it can't be abstracted that way so that it'd fit our 
> > principal model in HID subsystem?
> 
> I tried and I failed. The HID subsystem doesn’t provide the 
> functionality necessary to implement the protocol, or maybe I’m missing 
> something, but I haven’t found a way.

After reading through the driver, I tend to agree that this is the least 
painful way, so it's probably worth violating our usual mode of operation 
a bit :)

So could you please resend with the proper USB dependency added?

Thanks,

-- 
Jiri Kosina
SUSE Labs


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [v2] HID: add driver for U2F Zero built-in LED and RNG
@ 2019-03-27 14:07       ` Jiri Kosina
  0 siblings, 0 replies; 8+ messages in thread
From: Jiri Kosina @ 2019-03-27 14:07 UTC (permalink / raw)
  To: Andrej Shadura
  Cc: linux-input, linux-usb, kernel, Theodore Ts'o,
	Vasily Khoruzhick, Nick Kossifidis, linux-crypto

On Mon, 18 Mar 2019, Andrej Shadura wrote:

> > 
> > This driver isn't really a generic (transport-agnostic) one (which also 
> > means it's missing USB dependency in Kconfig btw).
> 
> Thanks, I forgot that one.
> 
> > Is there a reason why it can't be abstracted that way so that it'd fit our 
> > principal model in HID subsystem?
> 
> I tried and I failed. The HID subsystem doesn’t provide the 
> functionality necessary to implement the protocol, or maybe I’m missing 
> something, but I haven’t found a way.

After reading through the driver, I tend to agree that this is the least 
painful way, so it's probably worth violating our usual mode of operation 
a bit :)

So could you please resend with the proper USB dependency added?

Thanks,

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2019-03-27 14:07 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-09 18:32 [PATCH v2] HID: add driver for U2F Zero built-in LED and RNG Andrej Shadura
2019-03-09 18:32 ` [v2] " Andrej Shadura
2019-03-18 14:44 ` [PATCH v2] " Jiri Kosina
2019-03-18 14:44   ` [v2] " Jiri Kosina
2019-03-18 14:51   ` [PATCH v2] " Andrej Shadura
2019-03-18 14:51     ` [v2] " Andrej Shadura
2019-03-27 14:07     ` [PATCH v2] " Jiri Kosina
2019-03-27 14:07       ` [v2] " Jiri Kosina

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.