* [PATCH v2 1/4] iio:potentiostat:lmp91000: remove unnecessary parentheses
2019-03-08 19:46 [PATCH v2 0/4] iio:potentiostat:lmp91000: Adjust codestyle, and minor cleanup changes Anderson Reis
@ 2019-03-08 19:46 ` Anderson Reis
2019-03-08 21:04 ` Tomasz Duszynski
2019-03-08 19:46 ` [PATCH v2 2/4] iio:potentiostat:lmp91000: reduce line width and remove blank line Anderson Reis
` (2 subsequent siblings)
3 siblings, 1 reply; 11+ messages in thread
From: Anderson Reis @ 2019-03-08 19:46 UTC (permalink / raw)
To: jic23, knaack.h, lars, pmeerw, matt.ranostay
Cc: linux-iio, linux-kernel, kernel-usp, Lucas Oshiro, Anderson Reis
From: Lucas Oshiro <lucasseikioshiro@gmail.com>
Remove unnecessary parentheses on line 116, and solve these checkpatch.pl
CHECKs:
- lmp91000.c:116: CHECK: Unnecessary parentheses around 'state != channel'
- lmp91000.c:116: CHECK: Unnecessary parentheses around 'channel == LMP91000_REG_MODECN_TEMP'
Signed-off-by: Lucas Oshiro <lucasseikioshiro@gmail.com>
Signed-off-by: Anderson Reis <andersonreisrosa@gmail.com>
---
drivers/iio/potentiostat/lmp91000.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iio/potentiostat/lmp91000.c b/drivers/iio/potentiostat/lmp91000.c
index 90e895adf997..03d277621861 100644
--- a/drivers/iio/potentiostat/lmp91000.c
+++ b/drivers/iio/potentiostat/lmp91000.c
@@ -113,7 +113,7 @@ static int lmp91000_read(struct lmp91000_data *data, int channel, int *val)
return -EINVAL;
/* delay till first temperature reading is complete */
- if ((state != channel) && (channel == LMP91000_REG_MODECN_TEMP))
+ if (state != channel && channel == LMP91000_REG_MODECN_TEMP)
usleep_range(3000, 4000);
data->chan_select = channel != LMP91000_REG_MODECN_3LEAD;
--
2.20.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v2 1/4] iio:potentiostat:lmp91000: remove unnecessary parentheses
2019-03-08 19:46 ` [PATCH v2 1/4] iio:potentiostat:lmp91000: remove unnecessary parentheses Anderson Reis
@ 2019-03-08 21:04 ` Tomasz Duszynski
[not found] ` <CAJut9009qPt50o4CDNpkZ=NQVetivYHJMi2pY_DrDUk=WN=XMw@mail.gmail.com>
0 siblings, 1 reply; 11+ messages in thread
From: Tomasz Duszynski @ 2019-03-08 21:04 UTC (permalink / raw)
To: Anderson Reis
Cc: jic23, knaack.h, lars, pmeerw, matt.ranostay, linux-iio,
linux-kernel, kernel-usp, Lucas Oshiro
On Fri, Mar 08, 2019 at 04:46:52PM -0300, Anderson Reis wrote:
> From: Lucas Oshiro <lucasseikioshiro@gmail.com>
>
> Remove unnecessary parentheses on line 116, and solve these checkpatch.pl
No need to explicitly point finger at changed lines. This is what
context lines are for.
> CHECKs:
>
> - lmp91000.c:116: CHECK: Unnecessary parentheses around 'state != channel'
> - lmp91000.c:116: CHECK: Unnecessary parentheses around 'channel == LMP91000_REG_MODECN_TEMP'
>
> Signed-off-by: Lucas Oshiro <lucasseikioshiro@gmail.com>
> Signed-off-by: Anderson Reis <andersonreisrosa@gmail.com>
> ---
> drivers/iio/potentiostat/lmp91000.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/iio/potentiostat/lmp91000.c b/drivers/iio/potentiostat/lmp91000.c
> index 90e895adf997..03d277621861 100644
> --- a/drivers/iio/potentiostat/lmp91000.c
> +++ b/drivers/iio/potentiostat/lmp91000.c
> @@ -113,7 +113,7 @@ static int lmp91000_read(struct lmp91000_data *data, int channel, int *val)
> return -EINVAL;
>
> /* delay till first temperature reading is complete */
> - if ((state != channel) && (channel == LMP91000_REG_MODECN_TEMP))
> + if (state != channel && channel == LMP91000_REG_MODECN_TEMP)
> usleep_range(3000, 4000);
>
> data->chan_select = channel != LMP91000_REG_MODECN_3LEAD;
> --
> 2.20.1
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 2/4] iio:potentiostat:lmp91000: reduce line width and remove blank line
2019-03-08 19:46 [PATCH v2 0/4] iio:potentiostat:lmp91000: Adjust codestyle, and minor cleanup changes Anderson Reis
2019-03-08 19:46 ` [PATCH v2 1/4] iio:potentiostat:lmp91000: remove unnecessary parentheses Anderson Reis
@ 2019-03-08 19:46 ` Anderson Reis
2019-03-09 18:45 ` Jonathan Cameron
2019-03-08 19:46 ` [PATCH v2 3/4] iio:potentiostat:lmp91000: invert if statement Anderson Reis
2019-03-08 19:46 ` [PATCH v2 4/4] iio:potentiostat:lmp91000: change dev_err message Anderson Reis
3 siblings, 1 reply; 11+ messages in thread
From: Anderson Reis @ 2019-03-08 19:46 UTC (permalink / raw)
To: jic23, knaack.h, lars, pmeerw, matt.ranostay
Cc: linux-iio, linux-kernel, kernel-usp, Anderson Reis, Lucas Oshiro,
Anderson Reis
Break the line 258 in order fit the line width on 80 characters. Remove
the blank line 279, as the line before is also a blank line. Solve these
checkpath.el WARNING and CHECK:
- lmp91000.c:258: WARNING: line over 80 characters
- lmp91000.c:279: CHECK: Please don't use multiple blank lines
Signed-off-by: Lucas Oshiro <lucasseikioshiro@gmail.com>
Signed-off-by: Anderson Reis <andersonreisrosa@gmail.com>
---
drivers/iio/potentiostat/lmp91000.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/potentiostat/lmp91000.c b/drivers/iio/potentiostat/lmp91000.c
index 03d277621861..c45cfb632649 100644
--- a/drivers/iio/potentiostat/lmp91000.c
+++ b/drivers/iio/potentiostat/lmp91000.c
@@ -255,8 +255,8 @@ static int lmp91000_read_config(struct lmp91000_data *data)
regmap_write(data->regmap, LMP91000_REG_LOCK, 0);
regmap_write(data->regmap, LMP91000_REG_TIACN, reg);
- regmap_write(data->regmap, LMP91000_REG_REFCN, LMP91000_REG_REFCN_EXT_REF
- | LMP91000_REG_REFCN_50_ZERO);
+ regmap_write(data->regmap, LMP91000_REG_REFCN,
+ LMP91000_REG_REFCN_EXT_REF | LMP91000_REG_REFCN_50_ZERO);
regmap_write(data->regmap, LMP91000_REG_LOCK, 1);
return 0;
@@ -276,7 +276,6 @@ static int lmp91000_buffer_cb(const void *val, void *private)
static const struct iio_trigger_ops lmp91000_trigger_ops = {
};
-
static int lmp91000_buffer_preenable(struct iio_dev *indio_dev)
{
struct lmp91000_data *data = iio_priv(indio_dev);
--
2.20.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v2 2/4] iio:potentiostat:lmp91000: reduce line width and remove blank line
2019-03-08 19:46 ` [PATCH v2 2/4] iio:potentiostat:lmp91000: reduce line width and remove blank line Anderson Reis
@ 2019-03-09 18:45 ` Jonathan Cameron
0 siblings, 0 replies; 11+ messages in thread
From: Jonathan Cameron @ 2019-03-09 18:45 UTC (permalink / raw)
To: Anderson Reis
Cc: knaack.h, lars, pmeerw, matt.ranostay, linux-iio, linux-kernel,
kernel-usp, Anderson Reis, Lucas Oshiro
On Fri, 8 Mar 2019 16:46:53 -0300
Anderson Reis <andersonreisrosa@gmail.com> wrote:
> Break the line 258 in order fit the line width on 80 characters. Remove
> the blank line 279, as the line before is also a blank line. Solve these
> checkpath.el WARNING and CHECK:
>
> - lmp91000.c:258: WARNING: line over 80 characters
> - lmp91000.c:279: CHECK: Please don't use multiple blank lines
Again, not really needed, but doesn't matter much
Applied.
Thanks,
Jonathan
>
> Signed-off-by: Lucas Oshiro <lucasseikioshiro@gmail.com>
> Signed-off-by: Anderson Reis <andersonreisrosa@gmail.com>
> ---
> drivers/iio/potentiostat/lmp91000.c | 5 ++---
> 1 file changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/iio/potentiostat/lmp91000.c b/drivers/iio/potentiostat/lmp91000.c
> index 03d277621861..c45cfb632649 100644
> --- a/drivers/iio/potentiostat/lmp91000.c
> +++ b/drivers/iio/potentiostat/lmp91000.c
> @@ -255,8 +255,8 @@ static int lmp91000_read_config(struct lmp91000_data *data)
>
> regmap_write(data->regmap, LMP91000_REG_LOCK, 0);
> regmap_write(data->regmap, LMP91000_REG_TIACN, reg);
> - regmap_write(data->regmap, LMP91000_REG_REFCN, LMP91000_REG_REFCN_EXT_REF
> - | LMP91000_REG_REFCN_50_ZERO);
> + regmap_write(data->regmap, LMP91000_REG_REFCN,
> + LMP91000_REG_REFCN_EXT_REF | LMP91000_REG_REFCN_50_ZERO);
> regmap_write(data->regmap, LMP91000_REG_LOCK, 1);
>
> return 0;
> @@ -276,7 +276,6 @@ static int lmp91000_buffer_cb(const void *val, void *private)
> static const struct iio_trigger_ops lmp91000_trigger_ops = {
> };
>
> -
> static int lmp91000_buffer_preenable(struct iio_dev *indio_dev)
> {
> struct lmp91000_data *data = iio_priv(indio_dev);
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 3/4] iio:potentiostat:lmp91000: invert if statement
2019-03-08 19:46 [PATCH v2 0/4] iio:potentiostat:lmp91000: Adjust codestyle, and minor cleanup changes Anderson Reis
2019-03-08 19:46 ` [PATCH v2 1/4] iio:potentiostat:lmp91000: remove unnecessary parentheses Anderson Reis
2019-03-08 19:46 ` [PATCH v2 2/4] iio:potentiostat:lmp91000: reduce line width and remove blank line Anderson Reis
@ 2019-03-08 19:46 ` Anderson Reis
2019-03-09 18:46 ` Jonathan Cameron
2019-03-08 19:46 ` [PATCH v2 4/4] iio:potentiostat:lmp91000: change dev_err message Anderson Reis
3 siblings, 1 reply; 11+ messages in thread
From: Anderson Reis @ 2019-03-08 19:46 UTC (permalink / raw)
To: jic23, knaack.h, lars, pmeerw, matt.ranostay
Cc: linux-iio, linux-kernel, kernel-usp, Anderson Reis, Lucas Oshiro,
Anderson Reis
Invert if statement arms in line 214, in order to make the code cleaner,
solve these checkpatch.pl CHECKs:
- lmp9100.c:214: CHECK: braces {} should be used on all arms of this statement
- lmp9100.c:216: CHECK: Unbalanced braces around else statement
Signed-off-by: Lucas Oshiro <lucasseikioshiro@gmail.com>
Signed-off-by: Anderson Reis <andersonreisrosa@gmail.com>
---
drivers/iio/potentiostat/lmp91000.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/potentiostat/lmp91000.c b/drivers/iio/potentiostat/lmp91000.c
index c45cfb632649..1de17924e154 100644
--- a/drivers/iio/potentiostat/lmp91000.c
+++ b/drivers/iio/potentiostat/lmp91000.c
@@ -211,12 +211,11 @@ static int lmp91000_read_config(struct lmp91000_data *data)
ret = of_property_read_u32(np, "ti,tia-gain-ohm", &val);
if (ret) {
- if (of_property_read_bool(np, "ti,external-tia-resistor"))
- val = 0;
- else {
+ if (!of_property_read_bool(np, "ti,external-tia-resistor"))
dev_err(dev, "no ti,tia-gain-ohm defined");
return ret;
}
+ val = 0;
}
ret = -EINVAL;
--
2.20.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v2 3/4] iio:potentiostat:lmp91000: invert if statement
2019-03-08 19:46 ` [PATCH v2 3/4] iio:potentiostat:lmp91000: invert if statement Anderson Reis
@ 2019-03-09 18:46 ` Jonathan Cameron
2019-03-09 18:48 ` Jonathan Cameron
0 siblings, 1 reply; 11+ messages in thread
From: Jonathan Cameron @ 2019-03-09 18:46 UTC (permalink / raw)
To: Anderson Reis
Cc: knaack.h, lars, pmeerw, matt.ranostay, linux-iio, linux-kernel,
kernel-usp, Anderson Reis, Lucas Oshiro
On Fri, 8 Mar 2019 16:46:54 -0300
Anderson Reis <andersonreisrosa@gmail.com> wrote:
> Invert if statement arms in line 214, in order to make the code cleaner,
> solve these checkpatch.pl CHECKs:
>
> - lmp9100.c:214: CHECK: braces {} should be used on all arms of this statement
> - lmp9100.c:216: CHECK: Unbalanced braces around else statement
>
> Signed-off-by: Lucas Oshiro <lucasseikioshiro@gmail.com>
> Signed-off-by: Anderson Reis <andersonreisrosa@gmail.com>
Applied.
Thanks,
Jonathan
> ---
> drivers/iio/potentiostat/lmp91000.c | 5 ++---
> 1 file changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/iio/potentiostat/lmp91000.c b/drivers/iio/potentiostat/lmp91000.c
> index c45cfb632649..1de17924e154 100644
> --- a/drivers/iio/potentiostat/lmp91000.c
> +++ b/drivers/iio/potentiostat/lmp91000.c
> @@ -211,12 +211,11 @@ static int lmp91000_read_config(struct lmp91000_data *data)
>
> ret = of_property_read_u32(np, "ti,tia-gain-ohm", &val);
> if (ret) {
> - if (of_property_read_bool(np, "ti,external-tia-resistor"))
> - val = 0;
> - else {
> + if (!of_property_read_bool(np, "ti,external-tia-resistor"))
> dev_err(dev, "no ti,tia-gain-ohm defined");
> return ret;
> }
> + val = 0;
> }
>
> ret = -EINVAL;
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v2 3/4] iio:potentiostat:lmp91000: invert if statement
2019-03-09 18:46 ` Jonathan Cameron
@ 2019-03-09 18:48 ` Jonathan Cameron
0 siblings, 0 replies; 11+ messages in thread
From: Jonathan Cameron @ 2019-03-09 18:48 UTC (permalink / raw)
To: Anderson Reis
Cc: knaack.h, lars, pmeerw, matt.ranostay, linux-iio, linux-kernel,
kernel-usp, Anderson Reis, Lucas Oshiro
On Sat, 9 Mar 2019 18:46:15 +0000
Jonathan Cameron <jic23@kernel.org> wrote:
> On Fri, 8 Mar 2019 16:46:54 -0300
> Anderson Reis <andersonreisrosa@gmail.com> wrote:
>
> > Invert if statement arms in line 214, in order to make the code cleaner,
> > solve these checkpatch.pl CHECKs:
> >
> > - lmp9100.c:214: CHECK: braces {} should be used on all arms of this statement
> > - lmp9100.c:216: CHECK: Unbalanced braces around else statement
> >
> > Signed-off-by: Lucas Oshiro <lucasseikioshiro@gmail.com>
> > Signed-off-by: Anderson Reis <andersonreisrosa@gmail.com>
> Applied.
>
> Thanks,
>
> Jonathan
>
> > ---
> > drivers/iio/potentiostat/lmp91000.c | 5 ++---
> > 1 file changed, 2 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/iio/potentiostat/lmp91000.c b/drivers/iio/potentiostat/lmp91000.c
> > index c45cfb632649..1de17924e154 100644
> > --- a/drivers/iio/potentiostat/lmp91000.c
> > +++ b/drivers/iio/potentiostat/lmp91000.c
> > @@ -211,12 +211,11 @@ static int lmp91000_read_config(struct lmp91000_data *data)
> >
> > ret = of_property_read_u32(np, "ti,tia-gain-ohm", &val);
> > if (ret) {
> > - if (of_property_read_bool(np, "ti,external-tia-resistor"))
> > - val = 0;
> > - else {
> > + if (!of_property_read_bool(np, "ti,external-tia-resistor"))
Spoke too soon. You didn't build test this. Missing {
Fixed up.
Jonathan
> > dev_err(dev, "no ti,tia-gain-ohm defined");
> > return ret;
> > }
> > + val = 0;
> > }
> >
> > ret = -EINVAL;
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 4/4] iio:potentiostat:lmp91000: change dev_err message
2019-03-08 19:46 [PATCH v2 0/4] iio:potentiostat:lmp91000: Adjust codestyle, and minor cleanup changes Anderson Reis
` (2 preceding siblings ...)
2019-03-08 19:46 ` [PATCH v2 3/4] iio:potentiostat:lmp91000: invert if statement Anderson Reis
@ 2019-03-08 19:46 ` Anderson Reis
2019-03-09 18:49 ` Jonathan Cameron
3 siblings, 1 reply; 11+ messages in thread
From: Anderson Reis @ 2019-03-08 19:46 UTC (permalink / raw)
To: jic23, knaack.h, lars, pmeerw, matt.ranostay
Cc: linux-iio, linux-kernel, kernel-usp, Anderson Reis,
Anderson Reis, Lucas Oshiro
Change dev_err message on line 215 in order to inform that
tia-gain-ohm is not defined and an external resistor is not
specified.
Signed-off-by: Anderson Reis <andersonreisrosa@gmail.com>
Signed-off-by: Lucas Oshiro <lucasseikioshiro@gmail.com>
---
drivers/iio/potentiostat/lmp91000.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iio/potentiostat/lmp91000.c b/drivers/iio/potentiostat/lmp91000.c
index 1de17924e154..5ed9752008a5 100644
--- a/drivers/iio/potentiostat/lmp91000.c
+++ b/drivers/iio/potentiostat/lmp91000.c
@@ -212,7 +212,7 @@ static int lmp91000_read_config(struct lmp91000_data *data)
ret = of_property_read_u32(np, "ti,tia-gain-ohm", &val);
if (ret) {
if (!of_property_read_bool(np, "ti,external-tia-resistor"))
- dev_err(dev, "no ti,tia-gain-ohm defined");
+ dev_err(dev, "no ti,tia-gain-ohm defined and external resistor not specified\n");
return ret;
}
val = 0;
--
2.20.1
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v2 4/4] iio:potentiostat:lmp91000: change dev_err message
2019-03-08 19:46 ` [PATCH v2 4/4] iio:potentiostat:lmp91000: change dev_err message Anderson Reis
@ 2019-03-09 18:49 ` Jonathan Cameron
0 siblings, 0 replies; 11+ messages in thread
From: Jonathan Cameron @ 2019-03-09 18:49 UTC (permalink / raw)
To: Anderson Reis
Cc: knaack.h, lars, pmeerw, matt.ranostay, linux-iio, linux-kernel,
kernel-usp, Anderson Reis, Lucas Oshiro
On Fri, 8 Mar 2019 16:46:55 -0300
Anderson Reis <andersonreisrosa@gmail.com> wrote:
> Change dev_err message on line 215 in order to inform that
> tia-gain-ohm is not defined and an external resistor is not
> specified.
>
> Signed-off-by: Anderson Reis <andersonreisrosa@gmail.com>
> Signed-off-by: Lucas Oshiro <lucasseikioshiro@gmail.com>
Applied.
Thanks,
Jonathan
> ---
> drivers/iio/potentiostat/lmp91000.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/iio/potentiostat/lmp91000.c b/drivers/iio/potentiostat/lmp91000.c
> index 1de17924e154..5ed9752008a5 100644
> --- a/drivers/iio/potentiostat/lmp91000.c
> +++ b/drivers/iio/potentiostat/lmp91000.c
> @@ -212,7 +212,7 @@ static int lmp91000_read_config(struct lmp91000_data *data)
> ret = of_property_read_u32(np, "ti,tia-gain-ohm", &val);
> if (ret) {
> if (!of_property_read_bool(np, "ti,external-tia-resistor"))
> - dev_err(dev, "no ti,tia-gain-ohm defined");
> + dev_err(dev, "no ti,tia-gain-ohm defined and external resistor not specified\n");
> return ret;
> }
> val = 0;
^ permalink raw reply [flat|nested] 11+ messages in thread