* [U-Boot] [PATCH 1/3] imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree
@ 2019-03-13 18:02 Fabio Estevam
2019-03-13 18:02 ` [U-Boot] [PATCH 2/3] imx8mq_evk: README: Fix a typo in the destination path Fabio Estevam
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Fabio Estevam @ 2019-03-13 18:02 UTC (permalink / raw)
To: u-boot
After building ATF it is needed to copy the generated bl31.bin file to
the U-Boot source tree.
Make this step explicit in the instructions.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
board/freescale/imx8mq_evk/README | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/board/freescale/imx8mq_evk/README b/board/freescale/imx8mq_evk/README
index 2529f7da3d..bd5ee12722 100644
--- a/board/freescale/imx8mq_evk/README
+++ b/board/freescale/imx8mq_evk/README
@@ -9,13 +9,14 @@ Quick Start
Get and Build the ARM Trusted firmware
====================
+Note: srctree is U-Boot source directory
Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
branch: imx_4.14.62_1.0.0_beta
$ make PLAT=imx8mq bl31
+$ cp build/imx8mq/release/bl31.bin $(srctree)
Get the ddr and hdmi firmware
====================
-Note: srctree is U-Boot source directory
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin
$ chmod +x firmware-imx-7.9.bin
$ ./firmware-imx-7.9.bin
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 2/3] imx8mq_evk: README: Fix a typo in the destination path
2019-03-13 18:02 [U-Boot] [PATCH 1/3] imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree Fabio Estevam
@ 2019-03-13 18:02 ` Fabio Estevam
2019-04-02 8:38 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-03-13 18:02 ` [U-Boot] [PATCH 3/3] imx8mq_evk: README: Make the underline marker fill the whole sentence Fabio Estevam
2019-04-02 8:38 ` [U-Boot] [U-Boot, 1/3] imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree sbabic at denx.de
2 siblings, 1 reply; 6+ messages in thread
From: Fabio Estevam @ 2019-03-13 18:02 UTC (permalink / raw)
To: u-boot
The DDR firmware binaries should be copied to '$(srctree)', so fix
a typo.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
board/freescale/imx8mq_evk/README | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/freescale/imx8mq_evk/README b/board/freescale/imx8mq_evk/README
index bd5ee12722..aa9fbd8eaf 100644
--- a/board/freescale/imx8mq_evk/README
+++ b/board/freescale/imx8mq_evk/README
@@ -21,7 +21,7 @@ $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin
$ chmod +x firmware-imx-7.9.bin
$ ./firmware-imx-7.9.bin
$ cp firmware-imx-7.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(srctree)
-$ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(srctee)
+$ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
Build U-Boot
====================
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [PATCH 3/3] imx8mq_evk: README: Make the underline marker fill the whole sentence
2019-03-13 18:02 [U-Boot] [PATCH 1/3] imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree Fabio Estevam
2019-03-13 18:02 ` [U-Boot] [PATCH 2/3] imx8mq_evk: README: Fix a typo in the destination path Fabio Estevam
@ 2019-03-13 18:02 ` Fabio Estevam
2019-04-02 8:38 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-04-02 8:38 ` [U-Boot] [U-Boot, 1/3] imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree sbabic at denx.de
2 siblings, 1 reply; 6+ messages in thread
From: Fabio Estevam @ 2019-03-13 18:02 UTC (permalink / raw)
To: u-boot
Let the underline marker "=" fill the whole sentence for better
readability.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
board/freescale/imx8mq_evk/README | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/board/freescale/imx8mq_evk/README b/board/freescale/imx8mq_evk/README
index aa9fbd8eaf..c1d400bcf9 100644
--- a/board/freescale/imx8mq_evk/README
+++ b/board/freescale/imx8mq_evk/README
@@ -1,14 +1,14 @@
U-Boot for the NXP i.MX8MQ EVK board
Quick Start
-====================
+===========
- Build the ARM Trusted firmware binary
- Get ddr and hdmi fimware
- Build U-Boot
- Boot
Get and Build the ARM Trusted firmware
-====================
+======================================
Note: srctree is U-Boot source directory
Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
branch: imx_4.14.62_1.0.0_beta
@@ -16,7 +16,7 @@ $ make PLAT=imx8mq bl31
$ cp build/imx8mq/release/bl31.bin $(srctree)
Get the ddr and hdmi firmware
-====================
+=============================
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin
$ chmod +x firmware-imx-7.9.bin
$ ./firmware-imx-7.9.bin
@@ -24,7 +24,7 @@ $ cp firmware-imx-7.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(srctree)
$ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
Build U-Boot
-====================
+============
$ export CROSS_COMPILE=aarch64-poky-linux-
$ make imx8mq_evk_defconfig
$ make flash.bin
@@ -33,5 +33,5 @@ Burn the flash.bin to MicroSD card offset 33KB
$sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33
Boot
-====================
+====
Set Boot switch SW801: 1100 and Bmode: 10 to boot from Micro SD.
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [U-Boot] [U-Boot, 1/3] imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree
2019-03-13 18:02 [U-Boot] [PATCH 1/3] imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree Fabio Estevam
2019-03-13 18:02 ` [U-Boot] [PATCH 2/3] imx8mq_evk: README: Fix a typo in the destination path Fabio Estevam
2019-03-13 18:02 ` [U-Boot] [PATCH 3/3] imx8mq_evk: README: Make the underline marker fill the whole sentence Fabio Estevam
@ 2019-04-02 8:38 ` sbabic at denx.de
2 siblings, 0 replies; 6+ messages in thread
From: sbabic at denx.de @ 2019-04-02 8:38 UTC (permalink / raw)
To: u-boot
> After building ATF it is needed to copy the generated bl31.bin file to
> the U-Boot source tree.
> Make this step explicit in the instructions.
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [U-Boot, 3/3] imx8mq_evk: README: Make the underline marker fill the whole sentence
2019-03-13 18:02 ` [U-Boot] [PATCH 3/3] imx8mq_evk: README: Make the underline marker fill the whole sentence Fabio Estevam
@ 2019-04-02 8:38 ` sbabic at denx.de
0 siblings, 0 replies; 6+ messages in thread
From: sbabic at denx.de @ 2019-04-02 8:38 UTC (permalink / raw)
To: u-boot
> Let the underline marker "=" fill the whole sentence for better
> readability.
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 6+ messages in thread
* [U-Boot] [U-Boot, 2/3] imx8mq_evk: README: Fix a typo in the destination path
2019-03-13 18:02 ` [U-Boot] [PATCH 2/3] imx8mq_evk: README: Fix a typo in the destination path Fabio Estevam
@ 2019-04-02 8:38 ` sbabic at denx.de
0 siblings, 0 replies; 6+ messages in thread
From: sbabic at denx.de @ 2019-04-02 8:38 UTC (permalink / raw)
To: u-boot
> The DDR firmware binaries should be copied to '$(srctree)', so fix
> a typo.
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-04-02 8:38 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-03-13 18:02 [U-Boot] [PATCH 1/3] imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree Fabio Estevam
2019-03-13 18:02 ` [U-Boot] [PATCH 2/3] imx8mq_evk: README: Fix a typo in the destination path Fabio Estevam
2019-04-02 8:38 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-03-13 18:02 ` [U-Boot] [PATCH 3/3] imx8mq_evk: README: Make the underline marker fill the whole sentence Fabio Estevam
2019-04-02 8:38 ` [U-Boot] [U-Boot, " sbabic at denx.de
2019-04-02 8:38 ` [U-Boot] [U-Boot, 1/3] imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree sbabic at denx.de
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.