[PATCH] drm/dp: Set the connector's TILE property even for DP SST connectors

* [PATCH] drm/dp: Set the connector's TILE property even for DP SST connectors
@ 2019-03-13  2:17 Manasi Navare
  2019-03-13 18:48 ` Alex Deucher
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Manasi Navare @ 2019-03-13  2:17 UTC (permalink / raw)
  To: intel-gfx, dri-devel; +Cc: Dave Airlie, Daniel Vetter

Current driver sets the tile property only for DP MST connectors.
However there are some tiled displays where each SST connector
carries a single tile. So we need to attach this property object
for every connector and set it for every connector (DP SST and MST).
Plus since the tile information is obtained as a result of EDID
parsing, the best place to update tile property is where we update
edid property.
Also now we dont need to explicitly set this now for MST connectors.

This has been tested with xrandr --props and modetest and verified
that TILE property is exposed correctly.

Cc: Dave Airlie <airlied@redhat.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
---
 drivers/gpu/drm/drm_connector.c       | 13 ++++++++++++-
 drivers/gpu/drm/drm_dp_mst_topology.c |  1 -
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 07d65a16c623..2355124849db 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -245,6 +245,7 @@ int drm_connector_init(struct drm_device *dev,
 	INIT_LIST_HEAD(&connector->modes);
 	mutex_init(&connector->mutex);
 	connector->edid_blob_ptr = NULL;
+	connector->tile_blob_ptr = NULL;
 	connector->status = connector_status_unknown;
 	connector->display_info.panel_orientation =
 		DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
@@ -272,6 +273,9 @@ int drm_connector_init(struct drm_device *dev,
 	drm_object_attach_property(&connector->base,
 				   config->non_desktop_property,
 				   0);
+	drm_object_attach_property(&connector->base,
+				   config->tile_property,
+				   0);
 
 	if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
 		drm_object_attach_property(&connector->base, config->prop_crtc_id, 0);
@@ -1712,6 +1716,8 @@ EXPORT_SYMBOL(drm_connector_set_path_property);
  * This looks up the tile information for a connector, and creates a
  * property for userspace to parse if it exists. The property is of
  * the form of 8 integers using ':' as a separator.
+ * This is used for dual port tiled displays with DisplayPort SST
+ * or DisplayPort MST connectors.
  *
  * Returns:
  * Zero on success, errno on failure.
@@ -1755,6 +1761,9 @@ EXPORT_SYMBOL(drm_connector_set_tile_property);
  *
  * This function creates a new blob modeset object and assigns its id to the
  * connector's edid property.
+ * Since we also parse tile information from EDID's displayID block, we also
+ * set the connector's tile property here. See drm_connector_set_tile_property()
+ * for more details.
  *
  * Returns:
  * Zero on success, negative errno on failure.
@@ -1796,7 +1805,9 @@ int drm_connector_update_edid_property(struct drm_connector *connector,
 	                                       edid,
 	                                       &connector->base,
 	                                       dev->mode_config.edid_property);
-	return ret;
+	if (ret)
+		return ret;
+	return drm_connector_set_tile_property(connector);
 }
 EXPORT_SYMBOL(drm_connector_update_edid_property);
 
diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index dc7ac0c60547..c630ed157994 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -3022,7 +3022,6 @@ struct edid *drm_dp_mst_get_edid(struct drm_connector *connector, struct drm_dp_
 		edid = drm_edid_duplicate(port->cached_edid);
 	else {
 		edid = drm_get_edid(connector, &port->aux.ddc);
-		drm_connector_set_tile_property(connector);
 	}
 	port->has_audio = drm_detect_monitor_audio(edid);
 	drm_dp_mst_topology_put_port(port);
-- 
2.19.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply related	[flat|nested] 5+ messages in thread