[PATCH v3 0/5] dt-bindings: improve the Armada DRM bindings

[PATCH v3 0/5] dt-bindings: improve the Armada DRM bindings

[Lubomir Rintel]

Hi,

this is the third spin of a patch set that aims to complete the Armada
DRM binding documentation. Apart from collecting the Review-by tags, the
only change is the order of the compatible strings for the LCDC node.

What is documented corresponds to the armada-devel branch of
git://git.armlinux.org.uk/~rmk/linux-arm.git with these differencies:

* Documentation of the bus-width property of the LCDC
* The MMP2 compatible strings.

Patches to the driver for the above were sent out separately.

Lubo

[PATCH v3 1/5] dt-bindings: reserved-memory: Add binding for Armada framebuffer

[Lubomir Rintel]

This is the binding for memory that is set aside for allocation of Marvell
Armada framebuffer objects.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>

---
Changes since v2:
- Collected the Reviewed-by tag

Changes since v1:
- Moved from bindings/display/armada/
- Removed the marvell,dove-framebuffer string
- Added to the MAINTAINERS entry

 .../marvell,armada-framebuffer.txt            | 22 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 2 files changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reserved-memory/marvell,armada-framebuffer.txt

diff --git a/Documentation/devicetree/bindings/reserved-memory/marvell,armada-framebuffer.txt b/Documentation/devicetree/bindings/reserved-memory/marvell,armada-framebuffer.txt
new file mode 100644
index 000000000000..ab243e2bad45
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/marvell,armada-framebuffer.txt
@@ -0,0 +1,22 @@
+Marvell Armada framebuffer reserved memory
+==========================================
+
+Memory set aside for allocation of Marvell Armada framebuffer objects.
+
+Required properties:
+
+ - compatible: must be "marvell,armada-framebuffer"
+
+Please refer to Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
+for common reserved memory binding usage.
+
+Example:
+
+	reserved-memory {
+		display_reserved: framebuffer {
+			compatible = "marvell,armada-framebuffer";
+			size = <0x02000000>;
+			alignment = <0x02000000>;
+			no-map;
+		};
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index f3a5c97e3419..e71aa05fef29 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8967,6 +8967,7 @@ T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-armada-fixes
 F:	drivers/gpu/drm/armada/
 F:	include/uapi/drm/armada_drm.h
 F:	Documentation/devicetree/bindings/display/armada/
+F:	Documentation/devicetree/bindings/reserved-memory/marvell,armada-framebuffer.txt
 
 MARVELL CRYPTO DRIVER
 M:	Boris Brezillon <boris.brezillon@bootlin.com>
-- 
2.20.1

[PATCH v3 2/5] dt-bindings: display: armada: Rename the binding doc file

[Lubomir Rintel]

Use a more generic name, since it will document more compatible LCD
controllers than just that of Dove. Also, there's no point putting it in
a separate directory.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>

---
Changes since v1:
- Choose a better name than armada/marvell-armada-drm.txt, since
  there will be no display-subsystem master node and thus it will
  only document just the LCDC.

 .../{armada/marvell,dove-lcd.txt => marvell,armada-lcdc.txt}    | 0
 MAINTAINERS                                                     | 2 +-
 2 files changed, 1 insertion(+), 1 deletion(-)
 rename Documentation/devicetree/bindings/display/{armada/marvell,dove-lcd.txt => marvell,armada-lcdc.txt} (100%)

diff --git a/Documentation/devicetree/bindings/display/armada/marvell,dove-lcd.txt b/Documentation/devicetree/bindings/display/marvell,armada-lcdc.txt
similarity index 100%
rename from Documentation/devicetree/bindings/display/armada/marvell,dove-lcd.txt
rename to Documentation/devicetree/bindings/display/marvell,armada-lcdc.txt
diff --git a/MAINTAINERS b/MAINTAINERS
index e71aa05fef29..890cbd6e0b7b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8966,7 +8966,7 @@ T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-armada-devel
 T:	git git://git.armlinux.org.uk/~rmk/linux-arm.git drm-armada-fixes
 F:	drivers/gpu/drm/armada/
 F:	include/uapi/drm/armada_drm.h
-F:	Documentation/devicetree/bindings/display/armada/
+F:	Documentation/devicetree/bindings/display/marvell,armada-lcdc.txt
 F:	Documentation/devicetree/bindings/reserved-memory/marvell,armada-framebuffer.txt
 
 MARVELL CRYPTO DRIVER
-- 
2.20.1

[PATCH v3 3/5] dt-bindings: display: armada: Improve the LCDC documentation

[Lubomir Rintel]

The port is a child, not a property. And should be accompanied by an
example. Plus a pair of cosmetic changes that don't seem to deserve a
separate commit.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>

---
Changes since v2:
- Collected the Reviewed-by tag

Changes since v1:
- Minor adjustments to the commit message wording.

 .../bindings/display/marvell,armada-lcdc.txt     | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/marvell,armada-lcdc.txt b/Documentation/devicetree/bindings/display/marvell,armada-lcdc.txt
index 46525ea3e646..2606a8efc956 100644
--- a/Documentation/devicetree/bindings/display/marvell,armada-lcdc.txt
+++ b/Documentation/devicetree/bindings/display/marvell,armada-lcdc.txt
@@ -1,10 +1,11 @@
-Device Tree bindings for Armada DRM CRTC driver
+Marvell Armada LCD controller
+=============================
 
 Required properties:
+
  - compatible: value should be "marvell,dove-lcd".
  - reg: base address and size of the LCD controller
  - interrupts: single interrupt number for the LCD controller
- - port: video output port with endpoints, as described by graph.txt
 
 Optional properties:
 
@@ -19,6 +20,11 @@ Note: all clocks are optional but at least one must be specified.
 Further clocks may be added in the future according to requirements of
 different SoCs.
 
+Required child nodes:
+
+- port: video output port with endpoints, as described by
+  Documentation/devicetree/bindings/graph.txt
+
 Example:
 
 	lcd0: lcd-controller@820000 {
@@ -27,4 +33,10 @@ Example:
 		interrupts = <47>;
 		clocks = <&si5351 0>;
 		clock-names = "ext_ref_clk_1";
+
+		lcd0_port: port {
+			lcd0_rgb_out: endpoint {
+				remote-endpoint = <&encoder_rgb_in>;
+			};
+		};
 	};
-- 
2.20.1

[PATCH v3 4/5] dt-bindings: display: armada: Add more compatible strings

[Lubomir Rintel]

There's a generic compatible string and the driver will work on a MMP2 as
well, using the same binding.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>

---
Changes since v2:
- Order marvell,armada-lcdc after the model-specific strings.

Changes since v1:
- Added marvell,armada-lcdc compatible string.

 .../devicetree/bindings/display/marvell,armada-lcdc.txt        | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/marvell,armada-lcdc.txt b/Documentation/devicetree/bindings/display/marvell,armada-lcdc.txt
index 2606a8efc956..0ea4cbe5a32e 100644
--- a/Documentation/devicetree/bindings/display/marvell,armada-lcdc.txt
+++ b/Documentation/devicetree/bindings/display/marvell,armada-lcdc.txt
@@ -3,7 +3,8 @@ Marvell Armada LCD controller
 
 Required properties:
 
- - compatible: value should be "marvell,dove-lcd".
+ - compatible: value should be "marvell,dove-lcd" or "marvell,mmp2-lcd",
+   depending on the exact SoC model, along with "marvell,armada-lcdc"
  - reg: base address and size of the LCD controller
  - interrupts: single interrupt number for the LCD controller
 
-- 
2.20.1

[PATCH v3 5/5] dt-bindings: display: armada: Document bus-width property

[Lubomir Rintel]

This makes it possible to choose a different pixel format for the
endpoint. Modelled after what other LCD controllers use, including
marvell,pxa2xx-lcdc and atmel,hlcdc-display-controller and perhaps more.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>

---
Changes since v2:
- Collected the Reviewed-by tag

 .../devicetree/bindings/display/marvell,armada-lcdc.txt     | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/marvell,armada-lcdc.txt b/Documentation/devicetree/bindings/display/marvell,armada-lcdc.txt
index 0ea4cbe5a32e..d1dadaaeee73 100644
--- a/Documentation/devicetree/bindings/display/marvell,armada-lcdc.txt
+++ b/Documentation/devicetree/bindings/display/marvell,armada-lcdc.txt
@@ -25,6 +25,11 @@ Required child nodes:
 
 - port: video output port with endpoints, as described by
   Documentation/devicetree/bindings/graph.txt
+  The endpoints can optionally specify the following property:
+
+  - bus-width: recognized values are <12>, <16>, <18> and <24>, that
+    select "rgb444", "rgb565", "rgb666" or "rgb888" pixel format
+    respectively. Defaults to <24> if unspecified.
 
 Example:
 
@@ -37,6 +42,7 @@ Example:
 
 		lcd0_port: port {
 			lcd0_rgb_out: endpoint {
+				bus-width = <24>;
 				remote-endpoint = <&encoder_rgb_in>;
 			};
 		};
-- 
2.20.1

Re: [PATCH v3 3/5] dt-bindings: display: armada: Improve the LCDC documentation

[Rob Herring]

On Wed, Mar 20, 2019 at 09:20:55AM +0100, Lubomir Rintel wrote:
> The port is a child, not a property. And should be accompanied by an
> example. Plus a pair of cosmetic changes that don't seem to deserve a
> separate commit.
> 
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> 
> ---
> Changes since v2:
> - Collected the Reviewed-by tag

Really, where?

> Changes since v1:
> - Minor adjustments to the commit message wording.
> 
>  .../bindings/display/marvell,armada-lcdc.txt     | 16 ++++++++++++++--
>  1 file changed, 14 insertions(+), 2 deletions(-)

Re: [PATCH v3 4/5] dt-bindings: display: armada: Add more compatible strings

[Rob Herring]

On Wed, 20 Mar 2019 09:20:56 +0100, Lubomir Rintel wrote:
> There's a generic compatible string and the driver will work on a MMP2 as
> well, using the same binding.
> 
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> 
> ---
> Changes since v2:
> - Order marvell,armada-lcdc after the model-specific strings.
> 
> Changes since v1:
> - Added marvell,armada-lcdc compatible string.
> 
>  .../devicetree/bindings/display/marvell,armada-lcdc.txt        | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v3 4/5] dt-bindings: display: armada: Add more compatible strings

[Rob Herring]

On Wed, 20 Mar 2019 09:20:56 +0100, Lubomir Rintel wrote:
> There's a generic compatible string and the driver will work on a MMP2 as
> well, using the same binding.
> 
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> 
> ---
> Changes since v2:
> - Order marvell,armada-lcdc after the model-specific strings.
> 
> Changes since v1:
> - Added marvell,armada-lcdc compatible string.
> 
>  .../devicetree/bindings/display/marvell,armada-lcdc.txt        | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>