From: Shawn Guo <shawnguo@kernel.org> To: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com>, Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>, Fabio Estevam <festevam@gmail.com>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-imx@nxp.com Subject: Re: [PATCH v2] ARM: dts: vf610: Add ZII SPB4 board Date: Thu, 21 Mar 2019 17:03:31 +0800 [thread overview] Message-ID: <20190321090329.GG12513@dragon> (raw) In-Reply-To: <20190313070224.30124-1-andrew.smirnov@gmail.com> On Wed, Mar 13, 2019 at 12:02:24AM -0700, Andrey Smirnov wrote: > Add Device Tree for VF610 based Zodiac Seat Power Box. > > Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Chris Healy <cphealy@gmail.com> > Cc: Andrew Lunn <andrew@lunn.ch> > Cc: Heiner Kallweit <hkallweit1@gmail.com> > Cc: Fabio Estevam <festevam@gmail.com> > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-kernel@vger.kernel.org > Cc: linux-imx@nxp.com > --- > > Changes since [v1]: > > - Change Makefile diff to keep entries in alphabetical order > > - Various node name changes > > [v1] lkml.kernel.org/r/20190311184928.25988-1-andrew.smirnov@gmail.com > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/vf610-zii-spb4.dts | 359 +++++++++++++++++++++++++++ > 2 files changed, 360 insertions(+) > create mode 100644 arch/arm/boot/dts/vf610-zii-spb4.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index f4f5aeaf3298..efefce8efa05 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -606,6 +606,7 @@ dtb-$(CONFIG_SOC_VF610) += \ > vf610-zii-dev-rev-b.dtb \ > vf610-zii-dev-rev-c.dtb \ > vf610-zii-scu4-aib.dtb \ > + vf610-zii-spb4.dtb \ > vf610-zii-ssmb-dtu.dtb \ > vf610-zii-ssmb-spu3.dtb > dtb-$(CONFIG_ARCH_MXS) += \ > diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts > new file mode 100644 > index 000000000000..3b0c003a9fcf > --- /dev/null > +++ b/arch/arm/boot/dts/vf610-zii-spb4.dts > @@ -0,0 +1,359 @@ > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > + > +/* > + * Device tree file for ZII's SPB4 board > + * > + * SPB - Seat Power Box > + * > + * Copyright (C) 2019 Zodiac Inflight Innovations > + */ > + > +/dts-v1/; > +#include "vf610.dtsi" > + > +/ { > + model = "ZII VF610 SPB4 Board"; > + compatible = "zii,vf610spb4", "zii,vf610dev", "fsl,vf610"; The board compatible needs to be documented in Documentation/devicetree/bindings/arm/fsl.yaml. And it should be a separate patch that needs to be ACKed by DT maintainer. > + > + chosen { > + stdout-path = &uart0; > + }; > + <snip> > +&iomuxc { > + pinctrl_dspi1: dspi1grp { > + fsl,pins = < > + VF610_PAD_PTD5__DSPI1_CS0 0x1182 > + VF610_PAD_PTD4__DSPI1_CS1 0x1182 > + VF610_PAD_PTC6__DSPI1_SIN 0x1181 > + VF610_PAD_PTC7__DSPI1_SOUT 0x1182 > + VF610_PAD_PTC8__DSPI1_SCK 0x1182 > + >; > + }; > + > + pinctrl_esdhc0: esdhc0grp { > + fsl,pins = < > + VF610_PAD_PTC0__ESDHC0_CLK 0x31ef > + VF610_PAD_PTC1__ESDHC0_CMD 0x31ef > + VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef > + VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef > + VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef > + VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef > + VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef > + VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef > + VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef > + VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef > + >; > + }; > + > + pinctrl_esdhc1: esdhc1grp { > + fsl,pins = < > + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef > + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef > + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef > + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef > + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef > + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef > + >; > + }; > + > + pinctrl_fec1: fec1grp { > + fsl,pins = < > + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 > + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 > + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 > + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 > + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 > + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 > + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 > + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 > + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 > + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 > + >; > + }; > + > + pinctrl_gpio_switch0: pinctrl-gpio-switch0 { > + fsl,pins = < > + VF610_PAD_PTE2__GPIO_107 0x31c2 > + VF610_PAD_PTB28__GPIO_98 0x219d > + >; > + }; > + > + pinctrl_i2c0: i2c0grp { > + fsl,pins = < > + VF610_PAD_PTB14__I2C0_SCL 0x37ff > + VF610_PAD_PTB15__I2C0_SDA 0x37ff > + >; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = < > + VF610_PAD_PTB16__I2C1_SCL 0x37ff > + VF610_PAD_PTB17__I2C1_SDA 0x37ff > + >; > + }; > + > + pinctrl_leds_debug: pinctrl-leds-debug { > + fsl,pins = < > + VF610_PAD_PTD3__GPIO_82 0x31c2 > + >; > + }; > + > + pinctrl_uart0: uart0grp { > + fsl,pins = < > + VF610_PAD_PTB10__UART0_TX 0x21a2 > + VF610_PAD_PTB11__UART0_RX 0x21a1 > + >; > + }; > + > + pinctrl_uart1: uart1grp { > + fsl,pins = < > + VF610_PAD_PTB23__UART1_TX 0x21a2 > + VF610_PAD_PTB24__UART1_RX 0x21a1 > + >; > + }; > + > + pinctrl_uart2: uart2grp { > + fsl,pins = < > + VF610_PAD_PTD0__UART2_TX 0x21a2 > + VF610_PAD_PTD1__UART2_RX 0x21a1 > + >; > + }; > + > + pinctrl_uart3: uart3grp { > + fsl,pins = < > + VF610_PAD_PTA30__UART3_TX 0x21a2 > + VF610_PAD_PTA31__UART3_RX 0x21a1 .git/rebase-apply/patch:388: space before tab in indent. VF610_PAD_PTA30__UART3_TX 0x21a2 .git/rebase-apply/patch:389: space before tab in indent. VF610_PAD_PTA31__UART3_RX 0x21a1 warning: 2 lines add whitespace errors. Shawn > + >; > + }; > +}; > -- > 2.20.1 >
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org> To: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch>, linux-kernel@vger.kernel.org, Chris Healy <cphealy@gmail.com>, linux-imx@nxp.com, Fabio Estevam <festevam@gmail.com>, linux-arm-kernel@lists.infradead.org, Heiner Kallweit <hkallweit1@gmail.com> Subject: Re: [PATCH v2] ARM: dts: vf610: Add ZII SPB4 board Date: Thu, 21 Mar 2019 17:03:31 +0800 [thread overview] Message-ID: <20190321090329.GG12513@dragon> (raw) In-Reply-To: <20190313070224.30124-1-andrew.smirnov@gmail.com> On Wed, Mar 13, 2019 at 12:02:24AM -0700, Andrey Smirnov wrote: > Add Device Tree for VF610 based Zodiac Seat Power Box. > > Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> > Cc: Shawn Guo <shawnguo@kernel.org> > Cc: Chris Healy <cphealy@gmail.com> > Cc: Andrew Lunn <andrew@lunn.ch> > Cc: Heiner Kallweit <hkallweit1@gmail.com> > Cc: Fabio Estevam <festevam@gmail.com> > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-kernel@vger.kernel.org > Cc: linux-imx@nxp.com > --- > > Changes since [v1]: > > - Change Makefile diff to keep entries in alphabetical order > > - Various node name changes > > [v1] lkml.kernel.org/r/20190311184928.25988-1-andrew.smirnov@gmail.com > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/vf610-zii-spb4.dts | 359 +++++++++++++++++++++++++++ > 2 files changed, 360 insertions(+) > create mode 100644 arch/arm/boot/dts/vf610-zii-spb4.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index f4f5aeaf3298..efefce8efa05 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -606,6 +606,7 @@ dtb-$(CONFIG_SOC_VF610) += \ > vf610-zii-dev-rev-b.dtb \ > vf610-zii-dev-rev-c.dtb \ > vf610-zii-scu4-aib.dtb \ > + vf610-zii-spb4.dtb \ > vf610-zii-ssmb-dtu.dtb \ > vf610-zii-ssmb-spu3.dtb > dtb-$(CONFIG_ARCH_MXS) += \ > diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts > new file mode 100644 > index 000000000000..3b0c003a9fcf > --- /dev/null > +++ b/arch/arm/boot/dts/vf610-zii-spb4.dts > @@ -0,0 +1,359 @@ > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > + > +/* > + * Device tree file for ZII's SPB4 board > + * > + * SPB - Seat Power Box > + * > + * Copyright (C) 2019 Zodiac Inflight Innovations > + */ > + > +/dts-v1/; > +#include "vf610.dtsi" > + > +/ { > + model = "ZII VF610 SPB4 Board"; > + compatible = "zii,vf610spb4", "zii,vf610dev", "fsl,vf610"; The board compatible needs to be documented in Documentation/devicetree/bindings/arm/fsl.yaml. And it should be a separate patch that needs to be ACKed by DT maintainer. > + > + chosen { > + stdout-path = &uart0; > + }; > + <snip> > +&iomuxc { > + pinctrl_dspi1: dspi1grp { > + fsl,pins = < > + VF610_PAD_PTD5__DSPI1_CS0 0x1182 > + VF610_PAD_PTD4__DSPI1_CS1 0x1182 > + VF610_PAD_PTC6__DSPI1_SIN 0x1181 > + VF610_PAD_PTC7__DSPI1_SOUT 0x1182 > + VF610_PAD_PTC8__DSPI1_SCK 0x1182 > + >; > + }; > + > + pinctrl_esdhc0: esdhc0grp { > + fsl,pins = < > + VF610_PAD_PTC0__ESDHC0_CLK 0x31ef > + VF610_PAD_PTC1__ESDHC0_CMD 0x31ef > + VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef > + VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef > + VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef > + VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef > + VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef > + VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef > + VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef > + VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef > + >; > + }; > + > + pinctrl_esdhc1: esdhc1grp { > + fsl,pins = < > + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef > + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef > + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef > + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef > + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef > + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef > + >; > + }; > + > + pinctrl_fec1: fec1grp { > + fsl,pins = < > + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 > + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 > + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 > + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 > + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 > + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 > + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 > + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 > + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 > + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 > + >; > + }; > + > + pinctrl_gpio_switch0: pinctrl-gpio-switch0 { > + fsl,pins = < > + VF610_PAD_PTE2__GPIO_107 0x31c2 > + VF610_PAD_PTB28__GPIO_98 0x219d > + >; > + }; > + > + pinctrl_i2c0: i2c0grp { > + fsl,pins = < > + VF610_PAD_PTB14__I2C0_SCL 0x37ff > + VF610_PAD_PTB15__I2C0_SDA 0x37ff > + >; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = < > + VF610_PAD_PTB16__I2C1_SCL 0x37ff > + VF610_PAD_PTB17__I2C1_SDA 0x37ff > + >; > + }; > + > + pinctrl_leds_debug: pinctrl-leds-debug { > + fsl,pins = < > + VF610_PAD_PTD3__GPIO_82 0x31c2 > + >; > + }; > + > + pinctrl_uart0: uart0grp { > + fsl,pins = < > + VF610_PAD_PTB10__UART0_TX 0x21a2 > + VF610_PAD_PTB11__UART0_RX 0x21a1 > + >; > + }; > + > + pinctrl_uart1: uart1grp { > + fsl,pins = < > + VF610_PAD_PTB23__UART1_TX 0x21a2 > + VF610_PAD_PTB24__UART1_RX 0x21a1 > + >; > + }; > + > + pinctrl_uart2: uart2grp { > + fsl,pins = < > + VF610_PAD_PTD0__UART2_TX 0x21a2 > + VF610_PAD_PTD1__UART2_RX 0x21a1 > + >; > + }; > + > + pinctrl_uart3: uart3grp { > + fsl,pins = < > + VF610_PAD_PTA30__UART3_TX 0x21a2 > + VF610_PAD_PTA31__UART3_RX 0x21a1 .git/rebase-apply/patch:388: space before tab in indent. VF610_PAD_PTA30__UART3_TX 0x21a2 .git/rebase-apply/patch:389: space before tab in indent. VF610_PAD_PTA31__UART3_RX 0x21a1 warning: 2 lines add whitespace errors. Shawn > + >; > + }; > +}; > -- > 2.20.1 > _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-03-21 9:03 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-03-13 7:02 [PATCH v2] ARM: dts: vf610: Add ZII SPB4 board Andrey Smirnov 2019-03-13 7:02 ` Andrey Smirnov 2019-03-13 10:47 ` Fabio Estevam 2019-03-13 10:47 ` Fabio Estevam 2019-03-21 9:03 ` Shawn Guo [this message] 2019-03-21 9:03 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190321090329.GG12513@dragon \ --to=shawnguo@kernel.org \ --cc=andrew.smirnov@gmail.com \ --cc=andrew@lunn.ch \ --cc=cphealy@gmail.com \ --cc=festevam@gmail.com \ --cc=hkallweit1@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.